September 2020 - openSUSE Updates - openSUSE Mailing Lists

openSUSE-RU-2020:1373-1: important: Recommended update for transactional-update
by maintenance＠opensuse.org 07 Sep '20

07 Sep '20

openSUSE Recommended Update: Recommended update for transactional-update ______________________________________________________________________________ Announcement ID: openSUSE-RU-2020:1373-1 Rating: important References: #1162320 Affected Products: openSUSE Leap 15.2 ______________________________________________________________________________ An update that has one recommended fix can now be installed. Description: This update for transactional-update fixes the following issue: - Mount efivarfs on EFI systems. (bsc#1162320) If the EFI variables are not available, some incorrect parameters will be attached to grub2-install, writing the binary to a wrong location. Due to this, the system fails at reboot with a missing symbol error. This update was imported from the SUSE:SLE-15-SP2:Update update project. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.2: zypper in -t patch openSUSE-2020-1373=1 Package List: - openSUSE Leap 15.2 (i586 x86_64): transactional-update-2.20.3-lp152.2.3.1 transactional-update-debuginfo-2.20.3-lp152.2.3.1 transactional-update-debugsource-2.20.3-lp152.2.3.1 - openSUSE Leap 15.2 (noarch): transactional-update-zypp-config-2.20.3-lp152.2.3.1 References: https://bugzilla.suse.com/1162320

1 0

openSUSE-RU-2020:1375-1: important: Recommended update for dracut
by maintenance＠opensuse.org 07 Sep '20

07 Sep '20

openSUSE Recommended Update: Recommended update for dracut ______________________________________________________________________________ Announcement ID: openSUSE-RU-2020:1375-1 Rating: important References: #1167494 #996146 Affected Products: openSUSE Leap 15.2 ______________________________________________________________________________ An update that has two recommended fixes can now be installed. Description: This update for dracut fixes the following issues: Update from version 049.1+suse.152.g8506e86f to version 049.1+suse.156.g7d852636: - net-lib.sh: support infiniband network mac addresses (bsc#996146) - 95nfs: use ip_params_for_remote_addr() (bsc#1167494) - 95iscsi: use ip_params_for_remote_addr() (bsc#1167494) - dracut-functions: add ip_params_for_remote_addr() helper (bsc#1167494) This update was imported from the SUSE:SLE-15-SP2:Update update project. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.2: zypper in -t patch openSUSE-2020-1375=1 Package List: - openSUSE Leap 15.2 (i586 x86_64): dracut-049.1+suse.156.g7d852636-lp152.2.9.1 dracut-debuginfo-049.1+suse.156.g7d852636-lp152.2.9.1 dracut-debugsource-049.1+suse.156.g7d852636-lp152.2.9.1 dracut-extra-049.1+suse.156.g7d852636-lp152.2.9.1 dracut-fips-049.1+suse.156.g7d852636-lp152.2.9.1 dracut-ima-049.1+suse.156.g7d852636-lp152.2.9.1 dracut-tools-049.1+suse.156.g7d852636-lp152.2.9.1 References: https://bugzilla.suse.com/1167494 https://bugzilla.suse.com/996146

1 0

openSUSE-RU-2020:1350-1: moderate: Recommended update for SUSE Manager Client Tools
by maintenance＠opensuse.org 07 Sep '20

07 Sep '20

openSUSE Recommended Update: Recommended update for SUSE Manager Client Tools ______________________________________________________________________________ Announcement ID: openSUSE-RU-2020:1350-1 Rating: moderate References: #1171281 #1172709 #1173149 #1173584 #1174405 #1174965 Affected Products: openSUSE Leap 15.2 ______________________________________________________________________________ An update that has 6 recommended fixes can now be installed. Description: This update fixes the following issues: POS_Image-Graphical7: - Add plymouth-plugin-label-ft package to all *7 templates and set them to be of SLE15SP2 version - Add optional dracut-wireless comment section and move wpa_suplicant there POS_Image-JeOS7: - Add plymouth-plugin-label-ft package to all *7 templates and set them to be of SLE15SP2 version - Add optional dracut-wireless comment section and move wpa_suplicant there dracut-saltboot: - Use automatic RAID assembly only in the first phase before start of salt dracut-wireless: - Make sure ifup is scheduled (bsc#1173149) golang-github-prometheus-prometheus: - Add support for Prometheus exporters proxy mgr-osad: - Move uyuni-base-common dependency from mgr-osad to mgr-osa-dispatcher (bsc#1174405) spacecmd: - Fix softwarechannel update for vendor channels (bsc#1172709) - Fix escaping of package names (bsc#1171281) spacewalk-koan: - Use the 4.1 image to fix tests suseRegisterInfo: - Enhance RedHat product detection for CentOS and OracleLinux (bsc#1173584) uyuni-common-libs: - Fix issues importing RPM packages with long RPM headers (bsc#1174965) This update was imported from the SUSE:SLE-15:Update update project. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.2: zypper in -t patch openSUSE-2020-1350=1 Package List: - openSUSE Leap 15.2 (noarch): dracut-saltboot-0.1.1595937550.0285244-lp152.2.7.1 References: https://bugzilla.suse.com/1171281 https://bugzilla.suse.com/1172709 https://bugzilla.suse.com/1173149 https://bugzilla.suse.com/1173584 https://bugzilla.suse.com/1174405 https://bugzilla.suse.com/1174965

1 0

openSUSE-RU-2020:1349-1: moderate: Recommended update for samba
by maintenance＠opensuse.org 07 Sep '20

07 Sep '20

openSUSE Recommended Update: Recommended update for samba ______________________________________________________________________________ Announcement ID: openSUSE-RU-2020:1349-1 Rating: moderate References: #1172810 Affected Products: openSUSE Leap 15.2 ______________________________________________________________________________ An update that has one recommended fix can now be installed. Description: This update for samba fixes the following issues: - Add 'libsmbldap0' to 'libsmbldap2' package to fix upgrades from previous versions. (bsc#1172810) This update was imported from the SUSE:SLE-15-SP2:Update update project. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.2: zypper in -t patch openSUSE-2020-1349=1 Package List: - openSUSE Leap 15.2 (i586 x86_64): ctdb-4.11.11+git.182.fe3646e9391-lp152.3.10.1 ctdb-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 ctdb-pcp-pmda-4.11.11+git.182.fe3646e9391-lp152.3.10.1 ctdb-pcp-pmda-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 ctdb-tests-4.11.11+git.182.fe3646e9391-lp152.3.10.1 ctdb-tests-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libdcerpc-binding0-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libdcerpc-binding0-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libdcerpc-devel-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libdcerpc-samr-devel-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libdcerpc-samr0-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libdcerpc-samr0-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libdcerpc0-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libdcerpc0-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libndr-devel-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libndr-krb5pac-devel-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libndr-krb5pac0-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libndr-krb5pac0-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libndr-nbt-devel-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libndr-nbt0-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libndr-nbt0-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libndr-standard-devel-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libndr-standard0-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libndr-standard0-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libndr0-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libndr0-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libnetapi-devel-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libnetapi0-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libnetapi0-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsamba-credentials-devel-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsamba-credentials0-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsamba-credentials0-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsamba-errors-devel-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsamba-errors0-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsamba-errors0-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsamba-hostconfig-devel-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsamba-hostconfig0-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsamba-hostconfig0-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsamba-passdb-devel-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsamba-passdb0-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsamba-passdb0-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsamba-policy-devel-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsamba-policy-python3-devel-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsamba-policy0-python3-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsamba-policy0-python3-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsamba-util-devel-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsamba-util0-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsamba-util0-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsamdb-devel-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsamdb0-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsamdb0-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsmbclient-devel-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsmbclient0-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsmbclient0-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsmbconf-devel-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsmbconf0-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsmbconf0-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsmbldap-devel-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsmbldap2-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsmbldap2-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libtevent-util-devel-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libtevent-util0-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libtevent-util0-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libwbclient-devel-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libwbclient0-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libwbclient0-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 samba-4.11.11+git.182.fe3646e9391-lp152.3.10.1 samba-ad-dc-4.11.11+git.182.fe3646e9391-lp152.3.10.1 samba-ad-dc-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 samba-client-4.11.11+git.182.fe3646e9391-lp152.3.10.1 samba-client-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 samba-core-devel-4.11.11+git.182.fe3646e9391-lp152.3.10.1 samba-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 samba-debugsource-4.11.11+git.182.fe3646e9391-lp152.3.10.1 samba-dsdb-modules-4.11.11+git.182.fe3646e9391-lp152.3.10.1 samba-dsdb-modules-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 samba-libs-4.11.11+git.182.fe3646e9391-lp152.3.10.1 samba-libs-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 samba-libs-python3-4.11.11+git.182.fe3646e9391-lp152.3.10.1 samba-libs-python3-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 samba-python3-4.11.11+git.182.fe3646e9391-lp152.3.10.1 samba-python3-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 samba-test-4.11.11+git.182.fe3646e9391-lp152.3.10.1 samba-test-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 samba-winbind-4.11.11+git.182.fe3646e9391-lp152.3.10.1 samba-winbind-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 - openSUSE Leap 15.2 (noarch): samba-doc-4.11.11+git.182.fe3646e9391-lp152.3.10.1 - openSUSE Leap 15.2 (x86_64): libdcerpc-binding0-32bit-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libdcerpc-binding0-32bit-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libdcerpc-samr0-32bit-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libdcerpc-samr0-32bit-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libdcerpc0-32bit-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libdcerpc0-32bit-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libndr-krb5pac0-32bit-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libndr-krb5pac0-32bit-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libndr-nbt0-32bit-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libndr-nbt0-32bit-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libndr-standard0-32bit-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libndr-standard0-32bit-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libndr0-32bit-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libndr0-32bit-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libnetapi-devel-32bit-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libnetapi0-32bit-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libnetapi0-32bit-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsamba-credentials0-32bit-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsamba-credentials0-32bit-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsamba-errors0-32bit-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsamba-errors0-32bit-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsamba-hostconfig0-32bit-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsamba-hostconfig0-32bit-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsamba-passdb0-32bit-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsamba-passdb0-32bit-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsamba-policy0-python3-32bit-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsamba-policy0-python3-32bit-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsamba-util0-32bit-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsamba-util0-32bit-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsamdb0-32bit-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsamdb0-32bit-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsmbclient0-32bit-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsmbclient0-32bit-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsmbconf0-32bit-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsmbconf0-32bit-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsmbldap2-32bit-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libsmbldap2-32bit-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libtevent-util0-32bit-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libtevent-util0-32bit-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libwbclient0-32bit-4.11.11+git.182.fe3646e9391-lp152.3.10.1 libwbclient0-32bit-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 samba-ad-dc-32bit-4.11.11+git.182.fe3646e9391-lp152.3.10.1 samba-ad-dc-32bit-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 samba-ceph-4.11.11+git.182.fe3646e9391-lp152.3.10.1 samba-ceph-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 samba-client-32bit-4.11.11+git.182.fe3646e9391-lp152.3.10.1 samba-client-32bit-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 samba-libs-32bit-4.11.11+git.182.fe3646e9391-lp152.3.10.1 samba-libs-32bit-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 samba-libs-python3-32bit-4.11.11+git.182.fe3646e9391-lp152.3.10.1 samba-libs-python3-32bit-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 samba-winbind-32bit-4.11.11+git.182.fe3646e9391-lp152.3.10.1 samba-winbind-32bit-debuginfo-4.11.11+git.182.fe3646e9391-lp152.3.10.1 References: https://bugzilla.suse.com/1172810

1 0

openSUSE-RU-2020:1366-1: moderate: Recommended update for yast2-rmt
by maintenance＠opensuse.org 07 Sep '20

07 Sep '20

openSUSE Recommended Update: Recommended update for yast2-rmt ______________________________________________________________________________ Announcement ID: openSUSE-RU-2020:1366-1 Rating: moderate References: #1171555 #1172674 Affected Products: openSUSE Leap 15.2 ______________________________________________________________________________ An update that has two recommended fixes can now be installed. Description: This update for yast2-rmt fixes the following issues: - Handle Common Name length. (bsc#1172674) - Changed placeholders in translatable strings to support better the 'gettext' language format tags. (bsc#1171555) This update was imported from the SUSE:SLE-15:Update update project. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.2: zypper in -t patch openSUSE-2020-1366=1 Package List: - openSUSE Leap 15.2 (noarch): yast2-rmt-1.3.2-lp152.2.3.1 References: https://bugzilla.suse.com/1171555 https://bugzilla.suse.com/1172674

1 0

openSUSE-RU-2020:1355-1: moderate: Recommended update for systemd
by maintenance＠opensuse.org 07 Sep '20

07 Sep '20

openSUSE Recommended Update: Recommended update for systemd ______________________________________________________________________________ Announcement ID: openSUSE-RU-2020:1355-1 Rating: moderate References: #1142733 #1146991 #1158336 #1172195 #1172824 #1173539 Affected Products: openSUSE Leap 15.2 ______________________________________________________________________________ An update that has 6 recommended fixes can now be installed. Description: This update for systemd fixes the following issues: - Improve logging when PID1 fails at setting a namespace up when spawning a command specified by 'Exec*='. (bsc#1172824, bsc#1142733) pid1: improve message when setting up namespace fails. execute: let's close glibc syslog channels too. execute: normalize logging in *execute.c*. execute: fix typo in error message. execute: drop explicit *log_open()*/*log_close()* now that it is unnecessary. execute: make use of the new logging mode in *execute.c* log: add a mode where we open the log fds for every single log message. log: let's make use of the fact that our functions return the negative error code for *log_oom()* too. execute: downgrade a log message ERR → WARNING, since we proceed ignoring its result. execute: rework logging in *setup_keyring()* to include unit info. execute: improve and augment execution log messages. - vconsole-setup: downgrade log message when setting font fails on dummy console. (bsc#1172195 bsc#1173539) - fix infinite timeout. (bsc#1158336) - bpf: mount bpffs by default on boot. (bsc#1146991) - man: explain precedence for options which take a list. - man: unify titling, fix description of precedence in sysusers.d(5) - udev-event: fix timeout log messages. This update was imported from the SUSE:SLE-15:Update update project. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.2: zypper in -t patch openSUSE-2020-1355=1 Package List: - openSUSE Leap 15.2 (i586 x86_64): libsystemd0-234-lp152.31.7.1 libsystemd0-debuginfo-234-lp152.31.7.1 libsystemd0-mini-234-lp152.31.7.1 libsystemd0-mini-debuginfo-234-lp152.31.7.1 libudev-devel-234-lp152.31.7.1 libudev-mini-devel-234-lp152.31.7.1 libudev-mini1-234-lp152.31.7.1 libudev-mini1-debuginfo-234-lp152.31.7.1 libudev1-234-lp152.31.7.1 libudev1-debuginfo-234-lp152.31.7.1 nss-myhostname-234-lp152.31.7.1 nss-myhostname-debuginfo-234-lp152.31.7.1 nss-mymachines-234-lp152.31.7.1 nss-mymachines-debuginfo-234-lp152.31.7.1 nss-systemd-234-lp152.31.7.1 nss-systemd-debuginfo-234-lp152.31.7.1 systemd-234-lp152.31.7.1 systemd-container-234-lp152.31.7.1 systemd-container-debuginfo-234-lp152.31.7.1 systemd-coredump-234-lp152.31.7.1 systemd-coredump-debuginfo-234-lp152.31.7.1 systemd-debuginfo-234-lp152.31.7.1 systemd-debugsource-234-lp152.31.7.1 systemd-devel-234-lp152.31.7.1 systemd-journal-remote-234-lp152.31.7.1 systemd-journal-remote-debuginfo-234-lp152.31.7.1 systemd-logger-234-lp152.31.7.1 systemd-mini-234-lp152.31.7.1 systemd-mini-container-mini-234-lp152.31.7.1 systemd-mini-container-mini-debuginfo-234-lp152.31.7.1 systemd-mini-coredump-mini-234-lp152.31.7.1 systemd-mini-coredump-mini-debuginfo-234-lp152.31.7.1 systemd-mini-debuginfo-234-lp152.31.7.1 systemd-mini-debugsource-234-lp152.31.7.1 systemd-mini-devel-234-lp152.31.7.1 systemd-mini-sysvinit-234-lp152.31.7.1 systemd-network-234-lp152.31.7.1 systemd-network-debuginfo-234-lp152.31.7.1 systemd-sysvinit-234-lp152.31.7.1 udev-234-lp152.31.7.1 udev-debuginfo-234-lp152.31.7.1 udev-mini-234-lp152.31.7.1 udev-mini-debuginfo-234-lp152.31.7.1 - openSUSE Leap 15.2 (noarch): systemd-bash-completion-234-lp152.31.7.1 systemd-mini-bash-completion-234-lp152.31.7.1 - openSUSE Leap 15.2 (x86_64): libsystemd0-32bit-234-lp152.31.7.1 libsystemd0-32bit-debuginfo-234-lp152.31.7.1 libudev-devel-32bit-234-lp152.31.7.1 libudev1-32bit-234-lp152.31.7.1 libudev1-32bit-debuginfo-234-lp152.31.7.1 nss-myhostname-32bit-234-lp152.31.7.1 nss-myhostname-32bit-debuginfo-234-lp152.31.7.1 nss-mymachines-32bit-234-lp152.31.7.1 nss-mymachines-32bit-debuginfo-234-lp152.31.7.1 systemd-32bit-234-lp152.31.7.1 systemd-32bit-debuginfo-234-lp152.31.7.1 References: https://bugzilla.suse.com/1142733 https://bugzilla.suse.com/1146991 https://bugzilla.suse.com/1158336 https://bugzilla.suse.com/1172195 https://bugzilla.suse.com/1172824 https://bugzilla.suse.com/1173539

1 0

openSUSE-RU-2020:1357-1: important: Recommended update for grub2
by maintenance＠opensuse.org 07 Sep '20

07 Sep '20

openSUSE Recommended Update: Recommended update for grub2 ______________________________________________________________________________ Announcement ID: openSUSE-RU-2020:1357-1 Rating: important References: #1174567 #1175766 Affected Products: openSUSE Leap 15.2 ______________________________________________________________________________ An update that has two recommended fixes can now be installed. Description: This update for grub2 fixes the following issues: - The GRUB_VERIFY_FLAGS_DEFER_AUTH is enabled regardless secure boot status (bsc#1175766) A secure boot status check has been added before requesting other verifiers to verify external module, therefore external module loading can work after shim_lock module is loaded and secure boot turned off. - Make consistent check to enable relative path on btrfs (bsc#1174567) This fix unified the test in grub-install and grub-mkconfig. The path to default or selected btrfs subvolume/snapshot is used if the root file system is btrfs and the config has enabled btrfs snapshot booting. This update was imported from the SUSE:SLE-15-SP2:Update update project. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.2: zypper in -t patch openSUSE-2020-1357=1 Package List: - openSUSE Leap 15.2 (i586 x86_64): grub2-2.04-lp152.7.12.1 grub2-branding-upstream-2.04-lp152.7.12.1 grub2-debuginfo-2.04-lp152.7.12.1 grub2-debugsource-2.04-lp152.7.12.1 - openSUSE Leap 15.2 (noarch): grub2-i386-efi-2.04-lp152.7.12.1 grub2-i386-efi-debug-2.04-lp152.7.12.1 grub2-i386-pc-2.04-lp152.7.12.1 grub2-i386-pc-debug-2.04-lp152.7.12.1 grub2-i386-xen-2.04-lp152.7.12.1 grub2-snapper-plugin-2.04-lp152.7.12.1 grub2-systemd-sleep-plugin-2.04-lp152.7.12.1 grub2-x86_64-efi-2.04-lp152.7.12.1 grub2-x86_64-efi-debug-2.04-lp152.7.12.1 grub2-x86_64-xen-2.04-lp152.7.12.1 References: https://bugzilla.suse.com/1174567 https://bugzilla.suse.com/1175766

1 0

openSUSE-RU-2020:1371-1: moderate: Recommended update for crmsh
by maintenance＠opensuse.org 07 Sep '20

07 Sep '20

openSUSE Recommended Update: Recommended update for crmsh ______________________________________________________________________________ Announcement ID: openSUSE-RU-2020:1371-1 Rating: moderate References: #1175057 Affected Products: openSUSE Leap 15.2 ______________________________________________________________________________ An update that has one recommended fix can now be installed. Description: This update for crmsh fixes the following issues: - Fixes an issue by 'ssh_merge' function for compatibility. (bsc#1175057) - Adjust sbd config process to fix bug on sbd stage. (bsc#1175057) This update was imported from the SUSE:SLE-15-SP2:Update update project. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.2: zypper in -t patch openSUSE-2020-1371=1 Package List: - openSUSE Leap 15.2 (noarch): crmsh-4.2.0+git.1598257562.570eb99d-lp152.4.15.1 crmsh-scripts-4.2.0+git.1598257562.570eb99d-lp152.4.15.1 crmsh-test-4.2.0+git.1598257562.570eb99d-lp152.4.15.1 References: https://bugzilla.suse.com/1175057

1 0

openSUSE-RU-2020:1363-1: moderate: Recommended update for aws-cli, python-boto3, and python-botocore
by maintenance＠opensuse.org 07 Sep '20

07 Sep '20

openSUSE Recommended Update: Recommended update for aws-cli, python-boto3, and python-botocore ______________________________________________________________________________ Announcement ID: openSUSE-RU-2020:1363-1 Rating: moderate References: #1075263 #1118021 #1118024 #1118027 #1146853 #1175147 #1175148 Affected Products: openSUSE Leap 15.1 ______________________________________________________________________________ An update that has 7 recommended fixes can now be installed. Description: This update for aws-cli, python-boto3, and python-botocore fixes the following issues: - This update mainly focuses on updating the API clients. Please refer to the rpm changelog of each package to receive a detailed list of all changes. This update was imported from the SUSE:SLE-15-SP1:Update update project. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.1: zypper in -t patch openSUSE-2020-1363=1 Package List: - openSUSE Leap 15.1 (noarch): aws-cli-1.18.117-lp151.2.9.1 python2-boto3-1.14.40-lp151.2.9.1 python2-botocore-1.17.40-lp151.2.9.1 python3-boto3-1.14.40-lp151.2.9.1 python3-botocore-1.17.40-lp151.2.9.1 References: https://bugzilla.suse.com/1075263 https://bugzilla.suse.com/1118021 https://bugzilla.suse.com/1118024 https://bugzilla.suse.com/1118027 https://bugzilla.suse.com/1146853 https://bugzilla.suse.com/1175147 https://bugzilla.suse.com/1175148

1 0

openSUSE-RU-2020:1353-1: moderate: Recommended update for yast2-storage-ng
by maintenance＠opensuse.org 07 Sep '20

07 Sep '20

openSUSE Recommended Update: Recommended update for yast2-storage-ng ______________________________________________________________________________ Announcement ID: openSUSE-RU-2020:1353-1 Rating: moderate References: #1110413 #1115749 #1145269 #1172026 #1172548 #1173793 #1174469 #1174475 Affected Products: openSUSE Leap 15.2 ______________________________________________________________________________ An update that has 8 recommended fixes can now be installed. Description: This update for autoyast2, yast2-storage-ng and libstorage-ng provides the following fixes: Fixes in autoyast2: - Fix 'autoyast' and 'clone_system' command line interfaces (bsc#1172548): * autoyast: Add a list-modules command to list all known modules. * autoyast: Display the correct client name in the help text. * autoyast: 'file' and 'module' command are now equivalent. Both of them support setting 'filename' and 'modname' arguments. * clone_system: Add a 'filename' option instead of always using '/root/autoinst.xml'. * clone_system: Move the logic to find the clonable modules. - Move pre-scripts to the autoinit client running them just after the profile has been processed. (bsc#1110413) - Do not remove interfaces configuration by default when there is not networking section defined in the profile. (bsc#1173793) - Export ntp_policy as CDATA so that empty strings are preserved for the second_stage. (bsc#1172026) - Saving log files of postpartitioning-scripts. (bsc#1145269) Fixes in yast2-storage-ng and libstorage-ng: - Fixed detection of shadowed subvolumes for roles using separate LVM volume groups for each filesystem. (bsc#1174475) - AutoinstProposal now properly reports the proposal as failed when it fails to find the disks. (bsc#1174469) - AutoYaST: do not append a suffix to LVM Volume Group names unless it is needed. (bsc#1115749) This update was imported from the SUSE:SLE-15-SP2:Update update project. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.2: zypper in -t patch openSUSE-2020-1353=1 Package List: - openSUSE Leap 15.2 (i586 x86_64): libstorage-ng-debuginfo-4.2.76-lp152.2.6.1 libstorage-ng-debugsource-4.2.76-lp152.2.6.1 libstorage-ng-devel-4.2.76-lp152.2.6.1 libstorage-ng-integration-tests-4.2.76-lp152.2.6.1 libstorage-ng-python3-4.2.76-lp152.2.6.1 libstorage-ng-python3-debuginfo-4.2.76-lp152.2.6.1 libstorage-ng-ruby-4.2.76-lp152.2.6.1 libstorage-ng-ruby-debuginfo-4.2.76-lp152.2.6.1 libstorage-ng-utils-4.2.76-lp152.2.6.1 libstorage-ng-utils-debuginfo-4.2.76-lp152.2.6.1 libstorage-ng1-4.2.76-lp152.2.6.1 libstorage-ng1-debuginfo-4.2.76-lp152.2.6.1 yast2-storage-ng-4.2.113-lp152.2.6.1 - openSUSE Leap 15.2 (noarch): autoyast2-4.2.42-lp152.2.3.1 autoyast2-installation-4.2.42-lp152.2.3.1 libstorage-ng-lang-4.2.76-lp152.2.6.1 References: https://bugzilla.suse.com/1110413 https://bugzilla.suse.com/1115749 https://bugzilla.suse.com/1145269 https://bugzilla.suse.com/1172026 https://bugzilla.suse.com/1172548 https://bugzilla.suse.com/1173793 https://bugzilla.suse.com/1174469 https://bugzilla.suse.com/1174475

1 0

openSUSE-RU-2020:1358-1: moderate: Recommended update for linuxrc
by maintenance＠opensuse.org 07 Sep '20

07 Sep '20

openSUSE Recommended Update: Recommended update for linuxrc ______________________________________________________________________________ Announcement ID: openSUSE-RU-2020:1358-1 Rating: moderate References: #1168036 Affected Products: openSUSE Leap 15.2 ______________________________________________________________________________ An update that has one recommended fix can now be installed. Description: This update for linuxrc fixes the following issues: - s390: set rd.zdev=no-auto if auto-config has been turned off. (bsc#1168036) This update was imported from the SUSE:SLE-15-SP2:Update update project. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.2: zypper in -t patch openSUSE-2020-1358=1 Package List: - openSUSE Leap 15.2 (i586 x86_64): linuxrc-7.0.15.1-lp152.2.3.1 linuxrc-debuginfo-7.0.15.1-lp152.2.3.1 linuxrc-debugsource-7.0.15.1-lp152.2.3.1 References: https://bugzilla.suse.com/1168036

1 0

openSUSE-RU-2020:1367-1: moderate: Recommended update for lshw
by maintenance＠opensuse.org 07 Sep '20

07 Sep '20

openSUSE Recommended Update: Recommended update for lshw ______________________________________________________________________________ Announcement ID: openSUSE-RU-2020:1367-1 Rating: moderate References: #1168865 #1169668 #1172156 Affected Products: openSUSE Leap 15.2 ______________________________________________________________________________ An update that has three recommended fixes can now be installed. Description: This update for lshw fixes the following issues: - Fixes the detection of powerpc products (bsc#1172156) - Fixed an issue where lshw crashed on powerpc and aarch64 (bsc#1168865, bsc#1169668) This update was imported from the SUSE:SLE-15-SP2:Update update project. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.2: zypper in -t patch openSUSE-2020-1367=1 Package List: - openSUSE Leap 15.2 (noarch): lshw-lang-B.02.19.2-lp152.2.3.1 - openSUSE Leap 15.2 (x86_64): lshw-B.02.19.2-lp152.2.3.1 lshw-debuginfo-B.02.19.2-lp152.2.3.1 lshw-debugsource-B.02.19.2-lp152.2.3.1 lshw-gui-B.02.19.2-lp152.2.3.1 lshw-gui-debuginfo-B.02.19.2-lp152.2.3.1 References: https://bugzilla.suse.com/1168865 https://bugzilla.suse.com/1169668 https://bugzilla.suse.com/1172156

1 0

openSUSE-RU-2020:1348-1: moderate: Recommended update for iputils
by maintenance＠opensuse.org 05 Sep '20

05 Sep '20

openSUSE Recommended Update: Recommended update for iputils ______________________________________________________________________________ Announcement ID: openSUSE-RU-2020:1348-1 Rating: moderate References: #927831 Affected Products: openSUSE Leap 15.1 ______________________________________________________________________________ An update that has one recommended fix can now be installed. Description: This update for iputils fixes the following issue: - ping: Remove workaround for bug in IP_RECVERR on raw sockets. (bsc#927831) This update was imported from the SUSE:SLE-15:Update update project. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.1: zypper in -t patch openSUSE-2020-1348=1 Package List: - openSUSE Leap 15.1 (i586 x86_64): iputils-debuginfo-s20161105-lp151.7.3.1 iputils-debugsource-s20161105-lp151.7.3.1 iputils-s20161105-lp151.7.3.1 rarpd-debuginfo-s20161105-lp151.7.3.1 rarpd-s20161105-lp151.7.3.1 References: https://bugzilla.suse.com/927831

1 0

openSUSE-RU-2020:1340-1: moderate: Recommended update for systemd
by maintenance＠opensuse.org 05 Sep '20

05 Sep '20

openSUSE Recommended Update: Recommended update for systemd ______________________________________________________________________________ Announcement ID: openSUSE-RU-2020:1340-1 Rating: moderate References: #1142733 #1146991 #1158336 #1172195 #1172824 #1173539 Affected Products: openSUSE Leap 15.1 ______________________________________________________________________________ An update that has 6 recommended fixes can now be installed. Description: This update for systemd fixes the following issues: - Improve logging when PID1 fails at setting a namespace up when spawning a command specified by 'Exec*='. (bsc#1172824, bsc#1142733) pid1: improve message when setting up namespace fails. execute: let's close glibc syslog channels too. execute: normalize logging in *execute.c*. execute: fix typo in error message. execute: drop explicit *log_open()*/*log_close()* now that it is unnecessary. execute: make use of the new logging mode in *execute.c* log: add a mode where we open the log fds for every single log message. log: let's make use of the fact that our functions return the negative error code for *log_oom()* too. execute: downgrade a log message ERR → WARNING, since we proceed ignoring its result. execute: rework logging in *setup_keyring()* to include unit info. execute: improve and augment execution log messages. - vconsole-setup: downgrade log message when setting font fails on dummy console. (bsc#1172195 bsc#1173539) - fix infinite timeout. (bsc#1158336) - bpf: mount bpffs by default on boot. (bsc#1146991) - man: explain precedence for options which take a list. - man: unify titling, fix description of precedence in sysusers.d(5) - udev-event: fix timeout log messages. This update was imported from the SUSE:SLE-15:Update update project. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.1: zypper in -t patch openSUSE-2020-1340=1 Package List: - openSUSE Leap 15.1 (i586 x86_64): libsystemd0-234-lp151.26.25.1 libsystemd0-debuginfo-234-lp151.26.25.1 libsystemd0-mini-234-lp151.26.25.1 libsystemd0-mini-debuginfo-234-lp151.26.25.1 libudev-devel-234-lp151.26.25.1 libudev-mini-devel-234-lp151.26.25.1 libudev-mini1-234-lp151.26.25.1 libudev-mini1-debuginfo-234-lp151.26.25.1 libudev1-234-lp151.26.25.1 libudev1-debuginfo-234-lp151.26.25.1 nss-myhostname-234-lp151.26.25.1 nss-myhostname-debuginfo-234-lp151.26.25.1 nss-mymachines-234-lp151.26.25.1 nss-mymachines-debuginfo-234-lp151.26.25.1 nss-systemd-234-lp151.26.25.1 nss-systemd-debuginfo-234-lp151.26.25.1 systemd-234-lp151.26.25.1 systemd-container-234-lp151.26.25.1 systemd-container-debuginfo-234-lp151.26.25.1 systemd-coredump-234-lp151.26.25.1 systemd-coredump-debuginfo-234-lp151.26.25.1 systemd-debuginfo-234-lp151.26.25.1 systemd-debugsource-234-lp151.26.25.1 systemd-devel-234-lp151.26.25.1 systemd-journal-remote-234-lp151.26.25.1 systemd-journal-remote-debuginfo-234-lp151.26.25.1 systemd-logger-234-lp151.26.25.1 systemd-mini-234-lp151.26.25.1 systemd-mini-container-mini-234-lp151.26.25.1 systemd-mini-container-mini-debuginfo-234-lp151.26.25.1 systemd-mini-coredump-mini-234-lp151.26.25.1 systemd-mini-coredump-mini-debuginfo-234-lp151.26.25.1 systemd-mini-debuginfo-234-lp151.26.25.1 systemd-mini-debugsource-234-lp151.26.25.1 systemd-mini-devel-234-lp151.26.25.1 systemd-mini-sysvinit-234-lp151.26.25.1 systemd-network-234-lp151.26.25.1 systemd-network-debuginfo-234-lp151.26.25.1 systemd-sysvinit-234-lp151.26.25.1 udev-234-lp151.26.25.1 udev-debuginfo-234-lp151.26.25.1 udev-mini-234-lp151.26.25.1 udev-mini-debuginfo-234-lp151.26.25.1 - openSUSE Leap 15.1 (noarch): systemd-bash-completion-234-lp151.26.25.1 systemd-mini-bash-completion-234-lp151.26.25.1 - openSUSE Leap 15.1 (x86_64): libsystemd0-32bit-234-lp151.26.25.1 libsystemd0-32bit-debuginfo-234-lp151.26.25.1 libudev-devel-32bit-234-lp151.26.25.1 libudev1-32bit-234-lp151.26.25.1 libudev1-32bit-debuginfo-234-lp151.26.25.1 nss-myhostname-32bit-234-lp151.26.25.1 nss-myhostname-32bit-debuginfo-234-lp151.26.25.1 nss-mymachines-32bit-234-lp151.26.25.1 nss-mymachines-32bit-debuginfo-234-lp151.26.25.1 systemd-32bit-234-lp151.26.25.1 systemd-32bit-debuginfo-234-lp151.26.25.1 References: https://bugzilla.suse.com/1142733 https://bugzilla.suse.com/1146991 https://bugzilla.suse.com/1158336 https://bugzilla.suse.com/1172195 https://bugzilla.suse.com/1172824 https://bugzilla.suse.com/1173539

1 0

openSUSE-RU-2020:1339-1: moderate: Recommended update for python-kiwi
by maintenance＠opensuse.org 05 Sep '20

05 Sep '20

openSUSE Recommended Update: Recommended update for python-kiwi ______________________________________________________________________________ Announcement ID: openSUSE-RU-2020:1339-1 Rating: moderate References: #1096738 #1165730 #1172908 #1173226 #1173356 #1174009 Affected Products: openSUSE Leap 15.1 ______________________________________________________________________________ An update that has 6 recommended fixes can now be installed. Description: This update for python-kiwi contains the following fixes: - Bump version up to 9.21.7: This version upgrade includes several fixes: * Skip filesystem check for XFS prior xfs_grow running xfs_repair check isn't strictly necessary before resizing, and in some cases it may even prevent resizing by giving an error that would be cleared through mounting the fs (e.g. when the fs wasn't cleanly umounted, and thus letting xfs recover and replay its journal). Given that xfs can only grow online (while being mounted), this is sufficient to ensure that the fs is in a state where it can be resized. This is related to bsc#1174009. (bsc#1174009) * Fixed grub setup in EFI/BOOT directory kiwi copied the same grub.cfg file as it exists in boot/grub2 to the efi path. This is wrong as the setup in the efi boot directory is used to enable normal grub loading and not providing the user grub configuration. In addition the changes here makes sure that the early grub boot code is placed into the system in any EFI case except for secure boot when shim-install is present. If shim-install is present it also creates the early grub boot setup such that kiwi doesn't have to do it. This Fixes #1491 and Fixes bsc#1172908. (bsc#1172908) * Use rsync in inplace transfer mode Using the --inplace option in rsync helps to save space on syncing the rootfs data and prevents e.g OBS workers from running out of VM space when transfering root filesystem data. Also using --inplace allows to keep hardlinks intact. This is related to bsc#1096738. (bsc#1096738) * Don't keep copy of grub2-install in the system To prevent shim-install from calling grub2-install in uefi mode kiwi temporary replaces the tool by a noop. This acts as a workaround for an issue in shim-install. However the workaround left a file copy of grub2-install in the system which should not happen. This commit Fixes bsc#1173226 and Fixes #1490. (bsc#1173226) * Fixes live ISOs This commit fixes iso images. Due to a change introduced in c7ed1cf live ISOs were no longer booting as the rootfs.img filesystem was copied to the squashfs container while being still mounted. Because of that, at boot time, it refused to mount. This commit adds umount method for the filesystem base class, so it can be umounted before deleting the instance. Fixes #1489 and bsc#1173356. (bsc#1173356) * Support grub timeout_style parameter Grub supports a style setting that influences the display of the menu depending on the configured timeout value. With this patch kiwi allows to specify the style via a new bootloader parameter named timeout_style="hidden|countdown". If not set the grub default applies which shows the menu in any case. This Fixes bsc#1165730 and Fixes #1404. (bsc#1165730) * Use auto video mode as default for grub An explicit video mode 800x600 was used for grub if no video mode setup exists in the XML description. For grub this should better result in the auto mode. Related to bsc#1165730. (bsc#1165730) This update was imported from the SUSE:SLE-15-SP1:Update update project. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.1: zypper in -t patch openSUSE-2020-1339=1 Package List: - openSUSE Leap 15.1 (i586 x86_64): dracut-kiwi-lib-9.21.7-lp151.2.14.1 dracut-kiwi-live-9.21.7-lp151.2.14.1 dracut-kiwi-oem-dump-9.21.7-lp151.2.14.1 dracut-kiwi-oem-repart-9.21.7-lp151.2.14.1 dracut-kiwi-overlay-9.21.7-lp151.2.14.1 kiwi-man-pages-9.21.7-lp151.2.14.1 kiwi-pxeboot-9.21.7-lp151.2.14.1 kiwi-tools-9.21.7-lp151.2.14.1 kiwi-tools-debuginfo-9.21.7-lp151.2.14.1 python-kiwi-debugsource-9.21.7-lp151.2.14.1 python3-kiwi-9.21.7-lp151.2.14.1 References: https://bugzilla.suse.com/1096738 https://bugzilla.suse.com/1165730 https://bugzilla.suse.com/1172908 https://bugzilla.suse.com/1173226 https://bugzilla.suse.com/1173356 https://bugzilla.suse.com/1174009

1 0

openSUSE-SU-2020:1346-1: critical: Security update for squid
by opensuse-security＠opensuse.org 05 Sep '20

05 Sep '20

openSUSE Security Update: Security update for squid ______________________________________________________________________________ Announcement ID: openSUSE-SU-2020:1346-1 Rating: critical References: #1173455 #1175664 #1175665 #1175671 Cross-References: CVE-2020-15049 CVE-2020-15810 CVE-2020-15811 CVE-2020-24606 Affected Products: openSUSE Leap 15.1 ______________________________________________________________________________ An update that fixes four vulnerabilities is now available. Description: This update for squid fixes the following issues: squid was updated to version 4.13: - CVE-2020-24606: Fix livelocking in peerDigestHandleReply (bsc#1175671). - CVE-2020-15811: Improve Transfer-Encoding handling (bsc#1175665). - CVE-2020-15810: Enforce token characters for field-name (bsc#1175664). This update was imported from the SUSE:SLE-15:Update update project. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.1: zypper in -t patch openSUSE-2020-1346=1 Package List: - openSUSE Leap 15.1 (x86_64): squid-4.13-lp151.2.24.1 squid-debuginfo-4.13-lp151.2.24.1 squid-debugsource-4.13-lp151.2.24.1 References: https://www.suse.com/security/cve/CVE-2020-15049.html https://www.suse.com/security/cve/CVE-2020-15810.html https://www.suse.com/security/cve/CVE-2020-15811.html https://www.suse.com/security/cve/CVE-2020-24606.html https://bugzilla.suse.com/1173455 https://bugzilla.suse.com/1175664 https://bugzilla.suse.com/1175665 https://bugzilla.suse.com/1175671

1 0

openSUSE-RU-2020:1341-1: moderate: Recommended update for zlib
by maintenance＠opensuse.org 05 Sep '20

05 Sep '20

openSUSE Recommended Update: Recommended update for zlib ______________________________________________________________________________ Announcement ID: openSUSE-RU-2020:1341-1 Rating: moderate References: #1174551 #1174736 Affected Products: openSUSE Leap 15.1 ______________________________________________________________________________ An update that has two recommended fixes can now be installed. Description: This update for zlib provides the following fixes: - Permit a deflateParams() parameter change as soon as possible. (bsc#1174736) - Fix DFLTCC not flushing EOBS when creating raw streams. (bsc#1174551) This update was imported from the SUSE:SLE-15:Update update project. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.1: zypper in -t patch openSUSE-2020-1341=1 Package List: - openSUSE Leap 15.1 (i586 x86_64): libminizip1-1.2.11-lp151.5.9.1 libminizip1-debuginfo-1.2.11-lp151.5.9.1 libz1-1.2.11-lp151.5.9.1 libz1-debuginfo-1.2.11-lp151.5.9.1 minizip-devel-1.2.11-lp151.5.9.1 zlib-debugsource-1.2.11-lp151.5.9.1 zlib-devel-1.2.11-lp151.5.9.1 zlib-devel-static-1.2.11-lp151.5.9.1 - openSUSE Leap 15.1 (x86_64): libminizip1-32bit-1.2.11-lp151.5.9.1 libminizip1-32bit-debuginfo-1.2.11-lp151.5.9.1 libz1-32bit-1.2.11-lp151.5.9.1 libz1-32bit-debuginfo-1.2.11-lp151.5.9.1 zlib-devel-32bit-1.2.11-lp151.5.9.1 zlib-devel-static-32bit-1.2.11-lp151.5.9.1 References: https://bugzilla.suse.com/1174551 https://bugzilla.suse.com/1174736

1 0

openSUSE-RU-2020:1347-1: moderate: Recommended update for crmsh
by maintenance＠opensuse.org 05 Sep '20

05 Sep '20

openSUSE Recommended Update: Recommended update for crmsh ______________________________________________________________________________ Announcement ID: openSUSE-RU-2020:1347-1 Rating: moderate References: #1175057 Affected Products: openSUSE Leap 15.1 ______________________________________________________________________________ An update that has one recommended fix can now be installed. Description: This update for crmsh fixes the following issues: - Fixes an issue by 'ssh_merge' function for compatibility. (bsc#1175057) - Adjust sbd config process to fix bug on sbd stage. (bsc#1175057) This update was imported from the SUSE:SLE-15-SP1:Update update project. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.1: zypper in -t patch openSUSE-2020-1347=1 Package List: - openSUSE Leap 15.1 (noarch): crmsh-4.1.0+git.1598258232.7580dd00-lp151.2.24.1 crmsh-scripts-4.1.0+git.1598258232.7580dd00-lp151.2.24.1 crmsh-test-4.1.0+git.1598258232.7580dd00-lp151.2.24.1 References: https://bugzilla.suse.com/1175057

1 0

openSUSE-RU-2020:1342-1: moderate: Recommended update for avahi
by maintenance＠opensuse.org 05 Sep '20

05 Sep '20

openSUSE Recommended Update: Recommended update for avahi ______________________________________________________________________________ Announcement ID: openSUSE-RU-2020:1342-1 Rating: moderate References: #1154063 Affected Products: openSUSE Leap 15.1 ______________________________________________________________________________ An update that has one recommended fix can now be installed. Description: This update for avahi fixes the following issues: - When changing ownership of /var/lib/autoipd, only change ownership of files owned by avahi, to mitigate against possible exploits (bsc#1154063). This update was imported from the SUSE:SLE-15-SP1:Update update project. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.1: zypper in -t patch openSUSE-2020-1342=1 Package List: - openSUSE Leap 15.1 (i586 x86_64): avahi-0.7-lp151.2.3.1 avahi-autoipd-0.7-lp151.2.3.1 avahi-autoipd-debuginfo-0.7-lp151.2.3.1 avahi-compat-howl-devel-0.7-lp151.2.3.1 avahi-compat-mDNSResponder-devel-0.7-lp151.2.3.1 avahi-debuginfo-0.7-lp151.2.3.1 avahi-debugsource-0.7-lp151.2.3.1 avahi-glib2-debugsource-0.7-lp151.2.3.1 avahi-utils-0.7-lp151.2.3.1 avahi-utils-debuginfo-0.7-lp151.2.3.1 avahi-utils-gtk-0.7-lp151.2.3.1 avahi-utils-gtk-debuginfo-0.7-lp151.2.3.1 libavahi-client3-0.7-lp151.2.3.1 libavahi-client3-debuginfo-0.7-lp151.2.3.1 libavahi-common3-0.7-lp151.2.3.1 libavahi-common3-debuginfo-0.7-lp151.2.3.1 libavahi-core7-0.7-lp151.2.3.1 libavahi-core7-debuginfo-0.7-lp151.2.3.1 libavahi-devel-0.7-lp151.2.3.1 libavahi-glib-devel-0.7-lp151.2.3.1 libavahi-glib1-0.7-lp151.2.3.1 libavahi-glib1-debuginfo-0.7-lp151.2.3.1 libavahi-gobject-devel-0.7-lp151.2.3.1 libavahi-gobject0-0.7-lp151.2.3.1 libavahi-gobject0-debuginfo-0.7-lp151.2.3.1 libavahi-ui-gtk3-0-0.7-lp151.2.3.1 libavahi-ui-gtk3-0-debuginfo-0.7-lp151.2.3.1 libavahi-ui0-0.7-lp151.2.3.1 libavahi-ui0-debuginfo-0.7-lp151.2.3.1 libdns_sd-0.7-lp151.2.3.1 libdns_sd-debuginfo-0.7-lp151.2.3.1 libhowl0-0.7-lp151.2.3.1 libhowl0-debuginfo-0.7-lp151.2.3.1 python3-avahi-0.7-lp151.2.3.1 python3-avahi-gtk-0.7-lp151.2.3.1 typelib-1_0-Avahi-0_6-0.7-lp151.2.3.1 - openSUSE Leap 15.1 (x86_64): avahi-32bit-debuginfo-0.7-lp151.2.3.1 avahi-mono-0.7-lp151.2.3.1 avahi-qt4-debugsource-0.7-lp151.2.3.1 libavahi-client3-32bit-0.7-lp151.2.3.1 libavahi-client3-32bit-debuginfo-0.7-lp151.2.3.1 libavahi-common3-32bit-0.7-lp151.2.3.1 libavahi-common3-32bit-debuginfo-0.7-lp151.2.3.1 libavahi-glib1-32bit-0.7-lp151.2.3.1 libavahi-glib1-32bit-debuginfo-0.7-lp151.2.3.1 libavahi-qt4-1-0.7-lp151.2.3.1 libavahi-qt4-1-debuginfo-0.7-lp151.2.3.1 libavahi-qt4-devel-0.7-lp151.2.3.1 libdns_sd-32bit-0.7-lp151.2.3.1 libdns_sd-32bit-debuginfo-0.7-lp151.2.3.1 - openSUSE Leap 15.1 (noarch): avahi-lang-0.7-lp151.2.3.1 References: https://bugzilla.suse.com/1154063

1 0

openSUSE-SU-2020:1345-1: moderate: Security update for curl
by opensuse-security＠opensuse.org 05 Sep '20

05 Sep '20

openSUSE Security Update: Security update for curl ______________________________________________________________________________ Announcement ID: openSUSE-SU-2020:1345-1 Rating: moderate References: #1175109 Cross-References: CVE-2020-8231 Affected Products: openSUSE Leap 15.1 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: This update for curl fixes the following issues: - An application that performs multiple requests with libcurl's multi API and sets the 'CURLOPT_CONNECT_ONLY' option, might in rare circumstances experience that when subsequently using the setup connect-only transfer, libcurl will pick and use the wrong connection and instead pick another one the application has created since then. [bsc#1175109, CVE-2020-8231] This update was imported from the SUSE:SLE-15:Update update project. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.1: zypper in -t patch openSUSE-2020-1345=1 Package List: - openSUSE Leap 15.1 (i586 x86_64): curl-7.60.0-lp151.5.15.1 curl-debuginfo-7.60.0-lp151.5.15.1 curl-debugsource-7.60.0-lp151.5.15.1 curl-mini-7.60.0-lp151.5.15.1 curl-mini-debuginfo-7.60.0-lp151.5.15.1 curl-mini-debugsource-7.60.0-lp151.5.15.1 libcurl-devel-7.60.0-lp151.5.15.1 libcurl-mini-devel-7.60.0-lp151.5.15.1 libcurl4-7.60.0-lp151.5.15.1 libcurl4-debuginfo-7.60.0-lp151.5.15.1 libcurl4-mini-7.60.0-lp151.5.15.1 libcurl4-mini-debuginfo-7.60.0-lp151.5.15.1 - openSUSE Leap 15.1 (x86_64): libcurl-devel-32bit-7.60.0-lp151.5.15.1 libcurl4-32bit-7.60.0-lp151.5.15.1 libcurl4-32bit-debuginfo-7.60.0-lp151.5.15.1 References: https://www.suse.com/security/cve/CVE-2020-8231.html https://bugzilla.suse.com/1175109

1 0

openSUSE-RU-2020:1343-1: moderate: Recommended update for osc-plugin-collab
by maintenance＠opensuse.org 05 Sep '20

05 Sep '20

openSUSE Recommended Update: Recommended update for osc-plugin-collab ______________________________________________________________________________ Announcement ID: openSUSE-RU-2020:1343-1 Rating: moderate References: Affected Products: openSUSE Leap 15.2 ______________________________________________________________________________ An update that has 0 recommended fixes can now be installed. Description: This update for osc-plugin-collab fixes the following issues: Update to version 0.103: + Call time.tzset() after changing the timezone (#53) + Fix python2 compatibility (#49) Update to version 0.102: + Fix configuring on python3 + Fix another str vs. bytes issue Update to version 0.101: + Port to python3 + Use https on the server Update to version 0.100: + Support new location for oscrc in ~/.config/osc/ Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.2: zypper in -t patch openSUSE-2020-1343=1 Package List: - openSUSE Leap 15.2 (noarch): osc-plugin-collab-0.103-lp152.4.3.1 References:

1 0

openSUSE-RU-2020:1344-1: moderate: Recommended update for akonadi-server
by maintenance＠opensuse.org 05 Sep '20

05 Sep '20

openSUSE Recommended Update: Recommended update for akonadi-server ______________________________________________________________________________ Announcement ID: openSUSE-RU-2020:1344-1 Rating: moderate References: #1172539 Affected Products: openSUSE Leap 15.2 ______________________________________________________________________________ An update that has one recommended fix can now be installed. Description: This update for akonadi-server fixes the following issues: - SUSE Linux Enterprise Desktop doesn't include mysql/mariadb but SUSE Linux Enterprise Server does. So make mysql a Recommended (instead of Required) package when building for Backports and add a patch that checks in runtime if mysql is available before setting it as the default database and if it's not, use the QSQLITE3 driver (boo#1172539). Patches already submitted and approved by upstream. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.2: zypper in -t patch openSUSE-2020-1344=1 Package List: - openSUSE Leap 15.2 (noarch): akonadi-server-lang-20.04.2-lp152.2.3.1 - openSUSE Leap 15.2 (x86_64): akonadi-server-20.04.2-lp152.2.3.1 akonadi-server-debuginfo-20.04.2-lp152.2.3.1 akonadi-server-debugsource-20.04.2-lp152.2.3.1 akonadi-server-devel-20.04.2-lp152.2.3.1 akonadi-server-devel-debuginfo-20.04.2-lp152.2.3.1 akonadi-server-sqlite-20.04.2-lp152.2.3.1 akonadi-server-sqlite-debuginfo-20.04.2-lp152.2.3.1 libKF5AkonadiAgentBase5-20.04.2-lp152.2.3.1 libKF5AkonadiAgentBase5-debuginfo-20.04.2-lp152.2.3.1 libKF5AkonadiCore5-20.04.2-lp152.2.3.1 libKF5AkonadiCore5-debuginfo-20.04.2-lp152.2.3.1 libKF5AkonadiPrivate5-20.04.2-lp152.2.3.1 libKF5AkonadiPrivate5-debuginfo-20.04.2-lp152.2.3.1 libKF5AkonadiWidgets5-20.04.2-lp152.2.3.1 libKF5AkonadiWidgets5-debuginfo-20.04.2-lp152.2.3.1 libKF5AkonadiXml5-20.04.2-lp152.2.3.1 libKF5AkonadiXml5-debuginfo-20.04.2-lp152.2.3.1 References: https://bugzilla.suse.com/1172539

1 0

openSUSE-RU-2020:1337-1: moderate: Recommended update for libmaxminddb
by maintenance＠opensuse.org 05 Sep '20

05 Sep '20

openSUSE Recommended Update: Recommended update for libmaxminddb ______________________________________________________________________________ Announcement ID: openSUSE-RU-2020:1337-1 Rating: moderate References: #1175006 Affected Products: openSUSE Leap 15.2 ______________________________________________________________________________ An update that has one recommended fix can now be installed. Description: This update for libmaxminddb fixes the following issues: - update to 1.4.3: * Use of uninitialized memory in dump_entry_data_list() could have cause a heap buffer flow in mmdblookup [bsc#1175006] This update was imported from the SUSE:SLE-15:Update update project. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.2: zypper in -t patch openSUSE-2020-1337=1 Package List: - openSUSE Leap 15.2 (i586 x86_64): libmaxminddb-debugsource-1.4.3-lp152.2.3.1 libmaxminddb-devel-1.4.3-lp152.2.3.1 libmaxminddb0-1.4.3-lp152.2.3.1 libmaxminddb0-debuginfo-1.4.3-lp152.2.3.1 mmdblookup-1.4.3-lp152.2.3.1 mmdblookup-debuginfo-1.4.3-lp152.2.3.1 - openSUSE Leap 15.2 (x86_64): libmaxminddb0-32bit-1.4.3-lp152.2.3.1 libmaxminddb0-32bit-debuginfo-1.4.3-lp152.2.3.1 References: https://bugzilla.suse.com/1175006

1 0

openSUSE-RU-2020:1338-1: moderate: Recommended update for zlib
by maintenance＠opensuse.org 05 Sep '20

05 Sep '20

openSUSE Recommended Update: Recommended update for zlib ______________________________________________________________________________ Announcement ID: openSUSE-RU-2020:1338-1 Rating: moderate References: #1174551 #1174736 Affected Products: openSUSE Leap 15.2 ______________________________________________________________________________ An update that has two recommended fixes can now be installed. Description: This update for zlib provides the following fixes: - Permit a deflateParams() parameter change as soon as possible. (bsc#1174736) - Fix DFLTCC not flushing EOBS when creating raw streams. (bsc#1174551) This update was imported from the SUSE:SLE-15:Update update project. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.2: zypper in -t patch openSUSE-2020-1338=1 Package List: - openSUSE Leap 15.2 (i586 x86_64): libminizip1-1.2.11-lp152.8.3.1 libminizip1-debuginfo-1.2.11-lp152.8.3.1 libz1-1.2.11-lp152.8.3.1 libz1-debuginfo-1.2.11-lp152.8.3.1 minizip-devel-1.2.11-lp152.8.3.1 zlib-debugsource-1.2.11-lp152.8.3.1 zlib-devel-1.2.11-lp152.8.3.1 zlib-devel-static-1.2.11-lp152.8.3.1 - openSUSE Leap 15.2 (x86_64): libminizip1-32bit-1.2.11-lp152.8.3.1 libminizip1-32bit-debuginfo-1.2.11-lp152.8.3.1 libz1-32bit-1.2.11-lp152.8.3.1 libz1-32bit-debuginfo-1.2.11-lp152.8.3.1 zlib-devel-32bit-1.2.11-lp152.8.3.1 zlib-devel-static-32bit-1.2.11-lp152.8.3.1 References: https://bugzilla.suse.com/1174551 https://bugzilla.suse.com/1174736

1 0

openSUSE-RU-2020:1333-1: moderate: Recommended update for 389-ds
by maintenance＠opensuse.org 04 Sep '20

04 Sep '20

openSUSE Recommended Update: Recommended update for 389-ds ______________________________________________________________________________ Announcement ID: openSUSE-RU-2020:1333-1 Rating: moderate References: #1174057 Affected Products: openSUSE Leap 15.1 ______________________________________________________________________________ An update that has one recommended fix can now be installed. Description: This update for 389-ds fixes the following issues: Update from version 1.4.2.14~git0.5ac5b02ce to version 1.4.2.16~git0.92afa2ea7: - Resolve upstream stability and fix rollup. (bsc#1174057) - dsidm ou delete fails - add more logconv stats for the new access log keywords - add new access log keywords for wtime and optime - Fix Allowed and Denied Ciphers lists - WebUI - UI - attr uniqueness - selecting empty subtree crashes cockpit - log warning when thread number is very different from autotuned value - Reindex task may create abandoned index file - Log an error when a search is fully unindexed - fix SLE15.2 install issps - dsctl fails with instance names that contain slapd- - Memory leaks in disk monitoring - Set the default minimum worker threads - Correct numSubordinates value for cn=monitor - dsctl and dsidm do not errors correctly when using JSON - Winsync setting winSyncWindowsFilter not working as expected - improve autotune defaults - Add option to healthcheck to list all the lint reports - UI - improve modal validation when creating an instance This update was imported from the SUSE:SLE-15-SP1:Update update project. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.1: zypper in -t patch openSUSE-2020-1333=1 Package List: - openSUSE Leap 15.1 (x86_64): 389-ds-1.4.2.16~git0.92afa2ea7-lp151.5.12.1 389-ds-debuginfo-1.4.2.16~git0.92afa2ea7-lp151.5.12.1 389-ds-debugsource-1.4.2.16~git0.92afa2ea7-lp151.5.12.1 389-ds-devel-1.4.2.16~git0.92afa2ea7-lp151.5.12.1 389-ds-snmp-1.4.2.16~git0.92afa2ea7-lp151.5.12.1 389-ds-snmp-debuginfo-1.4.2.16~git0.92afa2ea7-lp151.5.12.1 lib389-1.4.2.16~git0.92afa2ea7-lp151.5.12.1 libsvrcore0-1.4.2.16~git0.92afa2ea7-lp151.5.12.1 libsvrcore0-debuginfo-1.4.2.16~git0.92afa2ea7-lp151.5.12.1 References: https://bugzilla.suse.com/1174057

1 0