March 2020 - openSUSE Updates - openSUSE Mailing Lists

openSUSE-RU-2020:0420-1: moderate: Recommended update for spec-cleaner
by maintenance＠opensuse.org 31 Mar '20

31 Mar '20

openSUSE Recommended Update: Recommended update for spec-cleaner ______________________________________________________________________________ Announcement ID: openSUSE-RU-2020:0420-1 Rating: moderate References: #1099674 Affected Products: openSUSE Leap 15.1 ______________________________________________________________________________ An update that has one recommended fix can now be installed. Description: This update for spec-cleaner fixes the following issues: Update to 1.1.9 boo#1099674: * Add builtin and comprehensions to catch tad more issues * Do not add FIXME comments for already commented lines * Add the article to the comment * Exclude mysql_testserver calls from bracketing * Do not curlify systemd_ordering macro * Ignore dephell setup generator macro from bracketing * Use github actions and drop travis and tox * Use pre-commit framework for the project (it runs black, flake8, flake8-docstrings and mypy on every commit) * Update README * Add %{dephell_gensetup} macro instead of the full call to dephell com Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.1: zypper in -t patch openSUSE-2020-420=1 Package List: - openSUSE Leap 15.1 (noarch): spec-cleaner-1.1.9-lp151.2.18.1 spec-cleaner-format_spec_file-1.1.9-lp151.2.18.1 References: https://bugzilla.suse.com/1099674

1 0

openSUSE-SU-2020:0416-1: moderate: Security update for GraphicsMagick
by opensuse-security＠opensuse.org 31 Mar '20

31 Mar '20

openSUSE Security Update: Security update for GraphicsMagick ______________________________________________________________________________ Announcement ID: openSUSE-SU-2020:0416-1 Rating: moderate References: #1167208 #1167623 Cross-References: CVE-2019-12921 CVE-2020-10938 Affected Products: openSUSE Leap 15.1 ______________________________________________________________________________ An update that fixes two vulnerabilities is now available. Description: This update for GraphicsMagick fixes the following issues: - CVE-2019-12921: Fixed an issue where text filename components potentially coulf have allowed reading of arbitrary files via TranslateTextEx (boo#1167208). - CVE-2020-10938: Fixed an integer overflow and resultant heap-based buffer overflow in HuffmanDecodeImages (boo#1167623). Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.1: zypper in -t patch openSUSE-2020-416=1 Package List: - openSUSE Leap 15.1 (x86_64): GraphicsMagick-1.3.29-lp151.4.17.1 GraphicsMagick-debuginfo-1.3.29-lp151.4.17.1 GraphicsMagick-debugsource-1.3.29-lp151.4.17.1 GraphicsMagick-devel-1.3.29-lp151.4.17.1 libGraphicsMagick++-Q16-12-1.3.29-lp151.4.17.1 libGraphicsMagick++-Q16-12-debuginfo-1.3.29-lp151.4.17.1 libGraphicsMagick++-devel-1.3.29-lp151.4.17.1 libGraphicsMagick-Q16-3-1.3.29-lp151.4.17.1 libGraphicsMagick-Q16-3-debuginfo-1.3.29-lp151.4.17.1 libGraphicsMagick3-config-1.3.29-lp151.4.17.1 libGraphicsMagickWand-Q16-2-1.3.29-lp151.4.17.1 libGraphicsMagickWand-Q16-2-debuginfo-1.3.29-lp151.4.17.1 perl-GraphicsMagick-1.3.29-lp151.4.17.1 perl-GraphicsMagick-debuginfo-1.3.29-lp151.4.17.1 References: https://www.suse.com/security/cve/CVE-2019-12921.html https://www.suse.com/security/cve/CVE-2020-10938.html https://bugzilla.suse.com/1167208 https://bugzilla.suse.com/1167623

1 0

openSUSE-RU-2020:0414-1: moderate: Recommended update for python-apache-libcloud
by maintenance＠opensuse.org 30 Mar '20

30 Mar '20

openSUSE Recommended Update: Recommended update for python-apache-libcloud ______________________________________________________________________________ Announcement ID: openSUSE-RU-2020:0414-1 Rating: moderate References: #1166415 Affected Products: openSUSE Leap 15.1 ______________________________________________________________________________ An update that has one recommended fix can now be installed. Description: This update for python-apache-libcloud fixes the following issues: python-apache-libcloud was update to 2.8.1: for the changelog see: https://libcloud.readthedocs.io/en/stable/changelog.html#changes-in-apache- libcloud-v2-8-1 This update was imported from the SUSE:SLE-15:Update update project. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.1: zypper in -t patch openSUSE-2020-414=1 Package List: - openSUSE Leap 15.1 (noarch): python3-apache-libcloud-2.8.1-lp151.3.7.1 References: https://bugzilla.suse.com/1166415

1 0

openSUSE-RU-2020:0413-1: moderate: Recommended update for yast2-storage-ng
by maintenance＠opensuse.org 30 Mar '20

30 Mar '20

openSUSE Recommended Update: Recommended update for yast2-storage-ng ______________________________________________________________________________ Announcement ID: openSUSE-RU-2020:0413-1 Rating: moderate References: #1159201 #1161775 #1162043 Affected Products: openSUSE Leap 15.1 ______________________________________________________________________________ An update that has three recommended fixes can now be installed. Description: This update for yast2-storage-ng fixes the following issues: - Include a 'partitions' section in AutoYaST when exporting an unpartitioned software RAID which is not used as a filesystem. (bsc#1159201) - Fix for showing an error message when no suitable physical volumes are found for a given volume group instead of crashing. (bsc#1162043) This update for libstorage-ng fixes the following issues: - Add option to ignore clustered logical volumes as it can be detected but cannot be locked therefore during upgrade the process does not find any install OS. (bsc#1161775) This update was imported from the SUSE:SLE-15-SP1:Update update project. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.1: zypper in -t patch openSUSE-2020-413=1 Package List: - openSUSE Leap 15.1 (i586 x86_64): libstorage-ng-debuginfo-4.1.108-lp151.3.12.1 libstorage-ng-debugsource-4.1.108-lp151.3.12.1 libstorage-ng-devel-4.1.108-lp151.3.12.1 libstorage-ng-integration-tests-4.1.108-lp151.3.12.1 libstorage-ng-python3-4.1.108-lp151.3.12.1 libstorage-ng-python3-debuginfo-4.1.108-lp151.3.12.1 libstorage-ng-ruby-4.1.108-lp151.3.12.1 libstorage-ng-ruby-debuginfo-4.1.108-lp151.3.12.1 libstorage-ng-utils-4.1.108-lp151.3.12.1 libstorage-ng-utils-debuginfo-4.1.108-lp151.3.12.1 libstorage-ng1-4.1.108-lp151.3.12.1 libstorage-ng1-debuginfo-4.1.108-lp151.3.12.1 yast2-storage-ng-4.1.93-lp151.2.15.1 - openSUSE Leap 15.1 (noarch): libstorage-ng-lang-4.1.108-lp151.3.12.1 References: https://bugzilla.suse.com/1159201 https://bugzilla.suse.com/1161775 https://bugzilla.suse.com/1162043

1 0

openSUSE-RU-2020:0415-1: moderate: Recommended update for systemd
by maintenance＠opensuse.org 30 Mar '20

30 Mar '20

openSUSE Recommended Update: Recommended update for systemd ______________________________________________________________________________ Announcement ID: openSUSE-RU-2020:0415-1 Rating: moderate References: #1139459 #1161262 #1162108 #1164717 #1165579 Affected Products: openSUSE Leap 15.1 ______________________________________________________________________________ An update that solves one vulnerability and has four fixes is now available. Description: This update for systemd fixes the following issues: - manager: fix job mode when signalled to shutdown etc (bsc#1161262) - remove fallback for user/exit.target - dbus method Manager.Exit() does not start exit.target - do not install rescue.target for alt-↑ - %j/%J unit specifiers Added support for I/O scheduler selection with blk-mq (bsc#1165579, bsc#1164717). Added the udev 60-ssd-scheduler.rules: - This rules file which select the default IO scheduler for SSDs is being moved out from the git repo since this is not related to systemd or udev at all and is maintained by the kernel team. - core: coldplug possible nop_job (bsc#1139459) - Revert "udev: use 'deadline' IO scheduler for SSD disks" - Fix typo in function name - polkit: when authorizing via PK let's re-resolve callback/userdata instead of caching it (bsc#1162108 CVE-2020-1712) - sd-bus: introduce API for re-enqueuing incoming messages - polkit: on async pk requests, re-validate action/details This update was imported from the SUSE:SLE-15:Update update project. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.1: zypper in -t patch openSUSE-2020-415=1 Package List: - openSUSE Leap 15.1 (i586 x86_64): libsystemd0-234-lp151.26.13.1 libsystemd0-debuginfo-234-lp151.26.13.1 libsystemd0-mini-234-lp151.26.13.1 libsystemd0-mini-debuginfo-234-lp151.26.13.1 libudev-devel-234-lp151.26.13.1 libudev-mini-devel-234-lp151.26.13.1 libudev-mini1-234-lp151.26.13.1 libudev-mini1-debuginfo-234-lp151.26.13.1 libudev1-234-lp151.26.13.1 libudev1-debuginfo-234-lp151.26.13.1 nss-myhostname-234-lp151.26.13.1 nss-myhostname-debuginfo-234-lp151.26.13.1 nss-mymachines-234-lp151.26.13.1 nss-mymachines-debuginfo-234-lp151.26.13.1 nss-systemd-234-lp151.26.13.1 nss-systemd-debuginfo-234-lp151.26.13.1 systemd-234-lp151.26.13.1 systemd-container-234-lp151.26.13.1 systemd-container-debuginfo-234-lp151.26.13.1 systemd-coredump-234-lp151.26.13.1 systemd-coredump-debuginfo-234-lp151.26.13.1 systemd-debuginfo-234-lp151.26.13.1 systemd-debugsource-234-lp151.26.13.1 systemd-devel-234-lp151.26.13.1 systemd-logger-234-lp151.26.13.1 systemd-mini-234-lp151.26.13.1 systemd-mini-container-mini-234-lp151.26.13.1 systemd-mini-container-mini-debuginfo-234-lp151.26.13.1 systemd-mini-coredump-mini-234-lp151.26.13.1 systemd-mini-coredump-mini-debuginfo-234-lp151.26.13.1 systemd-mini-debuginfo-234-lp151.26.13.1 systemd-mini-debugsource-234-lp151.26.13.1 systemd-mini-devel-234-lp151.26.13.1 systemd-mini-sysvinit-234-lp151.26.13.1 systemd-sysvinit-234-lp151.26.13.1 udev-234-lp151.26.13.1 udev-debuginfo-234-lp151.26.13.1 udev-mini-234-lp151.26.13.1 udev-mini-debuginfo-234-lp151.26.13.1 - openSUSE Leap 15.1 (noarch): systemd-bash-completion-234-lp151.26.13.1 systemd-mini-bash-completion-234-lp151.26.13.1 - openSUSE Leap 15.1 (x86_64): libsystemd0-32bit-234-lp151.26.13.1 libsystemd0-32bit-debuginfo-234-lp151.26.13.1 libudev-devel-32bit-234-lp151.26.13.1 libudev1-32bit-234-lp151.26.13.1 libudev1-32bit-debuginfo-234-lp151.26.13.1 nss-myhostname-32bit-234-lp151.26.13.1 nss-myhostname-32bit-debuginfo-234-lp151.26.13.1 nss-mymachines-32bit-234-lp151.26.13.1 nss-mymachines-32bit-debuginfo-234-lp151.26.13.1 systemd-32bit-234-lp151.26.13.1 systemd-32bit-debuginfo-234-lp151.26.13.1 References: https://www.suse.com/security/cve/CVE-2020-1712.html https://bugzilla.suse.com/1139459 https://bugzilla.suse.com/1161262 https://bugzilla.suse.com/1162108 https://bugzilla.suse.com/1164717 https://bugzilla.suse.com/1165579

1 0

openSUSE-RU-2020:0412-1: important: Recommended update for yast2-samba-client
by maintenance＠opensuse.org 30 Mar '20

30 Mar '20

openSUSE Recommended Update: Recommended update for yast2-samba-client ______________________________________________________________________________ Announcement ID: openSUSE-RU-2020:0412-1 Rating: important References: #1158916 Affected Products: openSUSE Leap 15.1 ______________________________________________________________________________ An update that has one recommended fix can now be installed. Description: This update for yast2-samba-client fixes the following issues: - Fix for an issue when YaST2 samba server module is started, the nmbd service will be stopped, and it is not started if the module aborted. (bsc#1158916) This update was imported from the SUSE:SLE-15-SP1:Update update project. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.1: zypper in -t patch openSUSE-2020-412=1 Package List: - openSUSE Leap 15.1 (noarch): yast2-samba-client-4.1.3-lp151.2.3.1 References: https://bugzilla.suse.com/1158916

1 0

openSUSE-RU-2020:0410-1: moderate: Recommended update for inxi
by maintenance＠opensuse.org 30 Mar '20

30 Mar '20

openSUSE Recommended Update: Recommended update for inxi ______________________________________________________________________________ Announcement ID: openSUSE-RU-2020:0410-1 Rating: moderate References: #1085951 #1167611 Affected Products: openSUSE Leap 15.1 ______________________________________________________________________________ An update that has two recommended fixes can now be installed. Description: This update for inxi fixes the following issues: - Update to version 3.0.38: * See /usr/share/doc/packages/inxi/inxi.changelog - Add additional requirements (boo#1085951). Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.1: zypper in -t patch openSUSE-2020-410=1 Package List: - openSUSE Leap 15.1 (noarch): inxi-3.0.38-lp151.3.3.1 References: https://bugzilla.suse.com/1085951 https://bugzilla.suse.com/1167611

1 0

openSUSE-RU-2020:0411-1: important: Recommended update for makedumpfile
by maintenance＠opensuse.org 30 Mar '20

30 Mar '20

openSUSE Recommended Update: Recommended update for makedumpfile ______________________________________________________________________________ Announcement ID: openSUSE-RU-2020:0411-1 Rating: important References: #1141895 #1142715 Affected Products: openSUSE Leap 15.1 ______________________________________________________________________________ An update that has two recommended fixes can now be installed. Description: This update for makedumpfile fixes the following issues: - Fix for kdump on AMD servers with SME to avoid crashing the system without any dump, and provide proper information about the reason of crash. (bsc#1141895). - Fix for an issue when creating a dump to avoid running out of memory due to hanging kdump process. (bsc#1142715): This update was imported from the SUSE:SLE-15-SP1:Update update project. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.1: zypper in -t patch openSUSE-2020-411=1 Package List: - openSUSE Leap 15.1 (i586 x86_64): makedumpfile-1.6.3-lp151.8.6.1 makedumpfile-debuginfo-1.6.3-lp151.8.6.1 makedumpfile-debugsource-1.6.3-lp151.8.6.1 References: https://bugzilla.suse.com/1141895 https://bugzilla.suse.com/1142715

1 0

openSUSE-SU-2020:0405-1: moderate: Security update for phpMyAdmin
by opensuse-security＠opensuse.org 29 Mar '20

29 Mar '20

openSUSE Security Update: Security update for phpMyAdmin ______________________________________________________________________________ Announcement ID: openSUSE-SU-2020:0405-1 Rating: moderate References: #1167335 #1167336 #1167337 Cross-References: CVE-2020-10802 CVE-2020-10803 CVE-2020-10804 Affected Products: openSUSE Leap 15.1 SUSE Package Hub for SUSE Linux Enterprise 12 ______________________________________________________________________________ An update that fixes three vulnerabilities is now available. Description: This update for phpMyAdmin to version 4.9.5 fixes the following issues: - phpmyadmin was updated to 4.9.5: - CVE-2020-10804: Fixed an SQL injection in the user accounts page, particularly when changing a password (boo#1167335 PMASA-2020-2). - CVE-2020-10802: Fixed an SQL injection in the search feature (boo#1167336 PMASA-2020-3). - CVE-2020-10803: Fixed an SQL injection and XSS when displaying results (boo#1167337 PMASA-2020-4). - Removed the "options" field for the external transformation. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.1: zypper in -t patch openSUSE-2020-405=1 - SUSE Package Hub for SUSE Linux Enterprise 12: zypper in -t patch openSUSE-2020-405=1 Package List: - openSUSE Leap 15.1 (noarch): phpMyAdmin-4.9.5-lp151.2.15.1 - SUSE Package Hub for SUSE Linux Enterprise 12 (noarch): phpMyAdmin-4.9.5-43.1 References: https://www.suse.com/security/cve/CVE-2020-10802.html https://www.suse.com/security/cve/CVE-2020-10803.html https://www.suse.com/security/cve/CVE-2020-10804.html https://bugzilla.suse.com/1167335 https://bugzilla.suse.com/1167336 https://bugzilla.suse.com/1167337

1 0

openSUSE-SU-2020:0403-1: moderate: Security update for strongswan
by opensuse-security＠opensuse.org 29 Mar '20

29 Mar '20

openSUSE Security Update: Security update for strongswan ______________________________________________________________________________ Announcement ID: openSUSE-SU-2020:0403-1 Rating: moderate References: #1079548 Cross-References: CVE-2018-6459 Affected Products: openSUSE Leap 15.1 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: This update for strongswan fixes the following issues: Strongswan was updated to version 5.8.2 (jsc#SLE-11370). Security issue fixed: - CVE-2018-6459: Fixed a DoS vulnerability in the parser for PKCS#1 RSASSA-PSS signatures that was caused by insufficient input validation (bsc#1079548). Full changelogs: Version 5.8.2 * Identity-based CA constraints, which enforce that the certificate chain of the remote peer contains a CA certificate with a specific identity, are supported via vici/swanctl.conf. This is similar to the existing CA constraints but doesn't require that the CA certificate is locally installed, for instance, intermediate CA certificates received from the peers. Wildcard identity matching (e.g. ..., OU=Research, CN=*) could also be used for the latter but requires trust in the intermediate CAs to only issue certificates with legitimate subject DNs (e.g. the "Sales" CA must not issue certificates with OU=Research). With the new constraint that's not necessary as long as a path length basic constraint (--pathlen for pki --issue) prevents intermediate CAs from issuing further intermediate CAs. * Intermediate CA certificates may now be sent in hash-and-URL encoding by configuring a base URL for the parent CA (#3234, swanctl/rw-hash-and-url-multi-level). * Implemented NIST SP-800-90A Deterministic Random Bit Generator (DRBG) based on AES-CTR and SHA2-HMAC modes. Currently used by the gmp and ntru plugins. * Random nonces sent in an OCSP requests are now expected in the corresponding OCSP responses. * The kernel-netlink plugin now ignores deprecated IPv6 addresses for MOBIKE. Whether temporary or permanent IPv6 addresses are included now depends on the charon.prefer_temporary_addrs setting (#3192). * Extended Sequence Numbers (ESN) are configured via PF_KEY if supported by the kernel. * The PF_KEY socket's receive buffer in the kernel-pfkey plugin is now cleared before sending requests, as many of the messages sent by the kernel are sent as broadcasts to all PF_KEY sockets. This is an issue if an external tool is used to manage SAs/policies unrelated to IPsec (#3225). * The vici plugin now uses unique section names for CHILD_SAs in child-updown events (7c74ce9190). * For individually deleted CHILD_SAs (in particular for IKEv1) the vici child-updown event now includes more information about the CHILD_SAs such as traffic statistics (#3198). * Custom loggers are correctly re-registered if log levels are changed via stroke loglevel (#3182). * Avoid lockups during startup on low entropy systems when using OpenSSL 1.1.1 (095a2c2eac). * Instead of failing later when setting a key, creating HMACs via openssl plugin now fails instantly if the underlying hash algorithm isn't supported (e.g. MD5 in FIPS-mode) so fallbacks to other plugins work properly (#3284). * Exponents of RSA keys read from TPM 2.0 via SAPI are correctly converted (8ee1242f1438). * Routing table IDs > 255 are supported for custom routes on Linux. * To avoid races, the check for hardware offloading support in the kernel-netlink plugin is performed during initialization of the plugin (a605452c03). * The D-Bus config file for charon-nm is now installed in $(datadir)/dbus-1/system.d instead of $(sysconfdir)/dbus-1/system.d, which is intended for sysadmin overrides. INVALID_MAJOR_VERSION notifies are now correctly sent in messages of the same exchange type and with the same message ID as the request. * IKEv2 SAs are now immediately destroyed when sending or receiving INVALID_SYNTAX notifies in authenticated messages. * For developers working from the repository the configure script now aborts if GNU gperf is not found. Version 5.8.1 * RDNs in DNs of X.509 certificates can now optionally be matched less strict. The global strongswan.conf option charon.rdn_matching takes two alternative values that cause the matching algorithm to either ignore the order of matched RDNs (reordered) or additionally (relaxed) accept DNs that contain more RDNs than configured (unmatched RDNs are treated like wildcard matches). * The updown plugin now passes the same interface to the script that is also used for the automatically installed routes, that is, the interface over which the peer is reached instead of the interface on which the local address is found (#3095). * TPM 2.0 contexts are now protected by a mutex to prevent issues if multiple IKE_SAs use the same private key concurrently (4b25885025). * Do a rekey check after the third QM message was received (#3060). * If available, explicit_bzero() is now used as memwipe() instead of our own implementation. * An .editorconfig file has been added, mainly so Github shows files with proper indentation (68346b6962). * The internal certificate of the load-tester plugin has been modified so it can again be used as end-entity cert with 5.6.3 and later (#3139). * The maximum data length of received COOKIE notifies (64 bytes) is now enforced (#3160). Version 5.8.0 * The systemd service units have been renamed. The modern unit, which was called strongswan-swanctl, is now called strongswan (the previous name is configured as alias in the unit, for which a symlink is created when the unit is enabled). The legacy unit is now called strongswan-starter. * Support for XFRM interfaces (available since Linux 4.19) has been added, which are intended to replace VTI devices (they are similar but offer several advantages, for instance, they are not bound to an address or address family). * IPsec SAs and policies are associated with such interfaces via interface IDs that can be configured in swanctl.conf (dynamic IDs may optionally be allocated for each SA and even direction). It's possible to use separate interfaces for in- and outbound traffic (or only use an interface in one direction and regular policies in the other). * Interfaces may be created dynamically via updown/vici scripts, or statically before or after establishing the SAs. Routes must be added manually as needed (the daemon will not install any routes for outbound policies with an interface ID). * When moving XFRM interfaces to other network namespaces they retain access to the SAs and policies installed in the original namespace, which allows providing IPsec tunnels for processes in other network namespaces without giving them access to the IPsec keys or IKE credentials. More information can be found on the page about route-based VPNs. * Initiation of childless IKE_SAs is supported (RFC 6023). If enabled and supported by the responder, no CHILD_SA is established during IKE_AUTH. Instead, all CHILD_SAs are created with CREATE_CHILD_SA exchanges. This allows using a separate DH exchange even for the first CHILD_SA, which is otherwise created during IKE_AUTH with keys derived from the IKE_SA's key material. * The swanctl --initiate command may be used to initiate only the IKE_SA via --ike option if --child is omitted and the peer supports this extension. * The NetworkManager backend and plugin support IPv6. * The new wolfssl plugin is a wrapper around the wolfSSL crypto library. Thanks to Sean Parkinson of wolfSSL Inc. for the initial patch. * IKE SPIs may optionally be labeled via the charon.spi_mask|label options in strongswan.conf. This feature was extracted from charon-tkm, however, now applies the mask/label in network order. * The openssl plugin supports ChaCha20-Poly1305 when built with OpenSSL 1.1.0. * The PB-TNC finite state machine according to section 3.2 of RFC 5793 was not correctly implemented when sending either a CRETRY or SRETRY batch. These batches can only be sent in the "Decided" state and a CRETRY batch can immediately carry all messages usually transported by a CDATA batch. It is currently not possible to send a SRETRY batch since full-duplex mode for PT-TLS transport is not supported. * Instead of marking IPv6 virtual IPs as deprecated, the kernel-netlink plugin now uses address labels to avoid that such addresses are used for non-VPN traffic (00a953d090). * The agent plugin now creates sockets to the ssh/gpg-agent dynamically and does not keep them open, which otherwise might prevent the agent from getting terminated. * To avoid broadcast loops the forecast plugin now only reinjects packets that are marked or received from the configured interface. * UTF-8 encoded passwords are supported via EAP-MSCHAPv2, which internally uses an UTF-16LE encoding to calculate the NT hash (#3014). * Properly delete temporary drop policies (used when updating IP addresses of SAs) if manual priorities are used, which was broken since 5.6.2 (8e31d65730). * Avoid overwriting start_action when parsing the inactivity timeout in the vici plugin (#2954). * Fixed the automatic termination of reloaded vici connections with start_action=start, which was broken since 5.6.3 (71b22c250f). * The lookup for shared secrets for IKEv1 SAs via sql plugin should now work better (6ec9f68f32). * Fixed a race condition in the trap manager between installation and removal of a policy (69cbe2ca3f). * The IPsec stack detection and module loading in starter has been removed (it wasn't enforced anyway and loading modules doesn't seem necessary, also KLIPS hasn't been supported for a long time and PF_KEY will eventually be removed from the Linux kernel, ba817d2917). * Several IKEv2 protocol details are now handled more strictly: Unrequested virtual IPs are ignored, CFG_REPLY payloads are ignored if no CFG_REQUEST payloads were sent, a USE TRANSPORT_MODE notify received from the responder is checked against the local configuration. * The keys and certificates used by the scenarios in the testing environment are now generated dynamically. Running the testing/scripts/build-certs script after creating the base and root images uses the pki utility installed in the latter to create the keys and certificates for all the CAs and in some cases for individual scenarios. These credentials are stored in the source tree, not the image, so this has to be called only once even if the images are later rebuilt. The script automatically (re-)rebuilds the guest images as that generates fresh CRLs and signs the DNS zones. The only keys/certificates currently not generated are the very large ones used by the ikev2/rw-eap-tls-fragments scenario. Version 5.7.2 * For RSA with PSS padding, the TPM 2.0 specification mandates the maximum salt length (as defined by the length of the key and hash). However, if the TPM is FIPS-168-4 compliant, the salt length equals the hash length. This is assumed for FIPS-140-2 compliant TPMs, but if that's not the case, it might be necessary to manually enable charon.plugins.tpm.fips_186_4 if the TPM doesn't use the maximum salt length. * Directories for credentials loaded by swanctl are now accessed relative to the loaded swanctl.conf file, in particular, when loading it from a custom location via --file argument. * The base directory, which is used if no custom location for swanctl.conf is specified, is now also configurable at runtime via SWANCTL_DIR environment variable. * If RADIUS Accounting is enabled, the eap-radius plugin will add the session ID (Acct-Session-Id) to Access-Request messages, which e.g. simplifies associating database entries for IP leases and accounting with sessions (the session ID does not change when IKE_SAs are rekeyed, #2853). * All IP addresses assigned by a RADIUS server are included in Accounting-Stop messages even if the client did not claim them, allowing to release them early in case of connection errors (#2856). * Selectors installed on transport mode SAs by the kernel-netlink plugin are now updated if an IP address changes (e.g. via MOBIKE) and it was part of the selectors. * No deletes are sent anymore when a rekeyed CHILD_SA expires (#2815). * The bypass-lan plugin now tracks interfaces to handle subnets that move from one interface to another and properly update associated routes (#2820). * Only valid and expected inbound IKEv2 messages are used to update the timestamp of the last received message (previously, retransmits also triggered an update). * IKEv2 requests from responders are now ignored until the IKE_SA is fully established (e.g. if a DPD request from the peer arrives before the IKE_AUTH response does, 46bea1add9). Delayed IKE_SA_INIT responses with COOKIE notifies we already recevied are ignored, they caused another reset of the IKE_SA previously (#2837). * Active and queued Quick Mode tasks are now adopted if the peer reauthenticates an IKEv1 SA while creating lots of CHILD_SAs. * Newer versions of the FreeBSD kernel add an SADB_X_EXT_SA2 extension to SADB_ACQUIRE messages, which allows the kernel-pfkey plugin to determine the reqid of the policy even if it wasn't installed by the daemon previously (e.g. when using FreeBSD's if_ipsec(4) VTIs, which install policies themselves, 872b9b3e8d). * Added support for RSA signatures with SHA-256 and SHA-512 to the agent plugin. For older versions of ssh/gpg-agent that only support SHA-1, IKEv2 signature authentication has to be disabled via charon.signature_authentication. * The sshkey and agent plugins support Ed25519/Ed448 SSH keys and signatures. * The openssl plugin supports X25519/X448 Diffie-Hellman and Ed25519/Ed448 keys and signatures when built against OpenSSL 1.1.1. * Support for Ed25519, ChaCha20/Poly1305, SHA-3 and AES-CCM were added to the botan plugin. * The mysql plugin now properly handles database connections with transactions under heavy load (#2779). * IP addresses in ha pools are now distributed evenly among all segments (#2828). * Private key implementations may optionally provide a list of supported signature schemes, which, as described above, is used by the tpm plugin because for each key on a TPM 2.0 the hash algorithm and for RSA also the padding scheme is predefined. * The testing environment is now based on Debian 9 (stretch) by default. This required some changes, in particular, updating to FreeRADIUS 3.x (which forced us to abandon the TNC@FHH patches and scenarios, 2fbe44bef3) and removing FIPS-enabled versions of OpenSSL (the FIPS module only supports OpenSSL 1.0.2). * Most test scenarios were migrated to swanctl. Version 5.7.1 * Fixes a vulnerability in the gmp plugin triggered by crafted certificates with RSA keys with very small moduli. When verifying signatures with such keys, the code patched with the fix for CVE-2018-16151/2 caused an integer underflow and subsequent heap buffer overflow that results in a crash of the daemon. * The vulnerability has been registered as CVE-2018-17540. Version 5.7.0 * Fixes a potential authorization bypass vulnerability in the gmp plugin that was caused by a too lenient verification of PKCS#1 v1.5 signatures. Several flaws could be exploited by a Bleichenbacher-style attack to forge signatures for low-exponent keys (i.e. with e=3). * CVE-2018-16151 has been assigned to the problem of accepting random bytes after the OID of the hash function in such signatures, and CVE-2018-16152 has been assigned to the issue of not verifying that the parameters in the ASN.1 algorithmIdentitifer structure is empty. Other flaws that don't lead to a vulnerability directly (e.g. not checking for at least 8 bytes of padding) have no separate CVE assigned. * Dots are not allowed anymore in section names in swanctl.conf and strongswan.conf. This mainly affects the configuration of file loggers. If the path for such a log file contains dots it now has to be configured in the new path setting within the arbitrarily renamed subsection in the filelog section. * Sections in swanctl.conf and strongswan.conf may now reference other sections. All settings and subsections from such a section are inherited. This allows to simplify configs as redundant information has only to be specified once and may then be included in other sections (see strongswan.conf for an example). * The originally selected IKE config (based on the IPs and IKE version) can now change if no matching algorithm proposal is found. This way the order of the configs doesn't matter that much anymore and it's easily possible to specify separate configs for clients that require weaker algorithms (instead of having to also add them in other configs that might be selected). * Support for Postquantum Preshared Keys for IKEv2 (draft-ietf-ipsecme-qr-ikev2) has been added. For an example refer to the swanctl/rw-cert-ppk scenario (or with EAP, or PSK authentication). * The new botan plugin is a wrapper around the Botan C++ crypto library. It requires a fairly recent build from Botan's master branch (or the upcoming 2.8.0 release). Thanks to René Korthaus and his team from Rohde & Schwarz Cybersecurity for the initial patch and to Jack Lloyd for quickly adding missing functions to Botan's FFI (C89) interface. * Implementation of RFC 8412 "Software Inventory Message and Attributes (SWIMA) for PA-TNC". * SWIMA subscription option sets CLOSE_WRITE trigger on apt history.log file resulting in a ClientRetry PB-TNC batch to initialize a new measurement cycle. The new imv/imc-swima plugins replace the previous imv/imc-swid plugins, which were removed. * Added support for fuzzing the PA-TNC (RFC 5792) and PB-TNC (RFC 5793) NEA protocols on Google's OSS-Fuzz infrastructure. * Support for version 2 of Intel's TPM2-TSS TGC Software Stack. The presence of the in-kernel /dev/tpmrm0 resource manager is automatically detected. * The pki tool accepts a xmppAddr otherName as a subjectAlternativeName using the syntax --san xmppaddr:<jid>. * swanctl.conf supports the configuration of marks the in- and/or outbound SA should apply to packets after processing on Linux. Configuring such a mark for outbound SAs requires at least a 4.14 kernel. The ability to set a mask and configuring a mark/mask for inbound SAs will be added with the upcoming 4.19 kernel. * New options in swanctl.conf allow configuring how/whether DF, ECN and DS fields in the IP headers are copied during IPsec processing. Controlling this is currently only possible on Linux. * The handling of sequence numbers in IKEv1 DPDs has been improved (#2714). * To avoid conflicts, the dhcp plugin now only uses the DHCP server port if explicitly configured. Version 5.6.3 * Fixed a DoS vulnerability in the IKEv2 key derivation if the openssl plugin is used in FIPS mode and HMAC-MD5 is negotiated as PRF. This vulnerability has been registered as CVE-2018-10811. * Fixed a vulnerability in the stroke plugin, which did not check the received length before reading a message from the socket. Unless a group is configured, root privileges are required to access that socket, so in the default configuration this shouldn't be an issue. This vulnerability has been registered as CVE-2018-5388. * CRLs that are not yet valid are now ignored to avoid problems in scenarios where expired certificates are removed from new CRLs and the clock on the host doing the revocation check is trailing behind that of the host issuing CRLs. Not doing this could result in accepting a revoked and expired certificate, if it's still valid according to the trailing clock but not contained anymore in not yet valid CRLs. * The issuer of fetched CRLs is now compared to the issuer of the checked certificate (#2608). * CRL validation results other than revocation (e.g. a skipped check because the CRL couldn't be fetched) are now stored also for intermediate CA certificates and not only for end-entity certificates, so a strict CRL policy can be enforced in such cases. * In compliance with RFC 4945, section 5.1.3.2, certificates used for IKE must now either not contain a keyUsage extension (like the ones generated by pki), or have at least one of the digitalSignature or nonRepudiation bits set. * New options for vici/swanctl allow forcing the local termination of an IKE_SA. This might be useful in situations where it's known the other end is not reachable anymore, or that it already removed the IKE_SA, so retransmitting a DELETE and waiting for a response would be pointless. * Waiting only a certain amount of time for a response (i.e. shorter than all retransmits would be) before destroying the IKE_SA is also possible by additionally specifying a timeout in the forced termination request. * When removing routes, the kernel-netlink plugin now checks if it tracks other routes for the same destination and replaces the installed route instead of just removing it. Same during installation, where existing routes previously weren't replaced. This should allow using traps with virtual IPs on Linux (#2162). * The dhcp plugin now only sends the client identifier DHCP option if the identity_lease setting is enabled (7b660944b6). It can also send identities of up to 255 bytes length, instead of the previous 64 bytes (30e886fe3b, 0e5b94d038). If a server address is configured, DHCP requests are now sent from port 67 instead of 68 to avoid ICMP port unreachables (becf027cd9). * The handling of faulty INVALID_KE_PAYLOAD notifies (e.g. one containing a DH group that wasn't proposed) during CREATE_CHILD_SA exchanges has been improved (#2536). * Roam events are now completely ignored for IKEv1 SAs (there is no MOBIKE to handle such changes properly). * ChaCha20/Poly1305 is now correctly proposed without key length (#2614). For compatibility with older releases the chacha20poly1305compat keyword may be included in proposals to also propose the algorithm with a key length (c58434aeff). * Configuration of hardware offload of IPsec SAs is now more flexible and allows a new setting (auto), which automatically uses it if the kernel and device both support it. If hw offload is set to yes and offloading is not supported, the CHILD_SA installation now fails. * The kernel-pfkey plugin optionally installs routes via internal interface (one with an IP in the local traffic selector). On FreeBSD, enabling this selects the correct source IP when sending packets from the gateway itself (e811659323). * SHA-2 based PRFs are supported in PKCS#8 files as generated by OpenSSL 1.1 (#2574). * The pki --verify tool may load CA certificates and CRLs from directories. * The IKE daemon now also switches to port 4500 if the remote port is not 500 (e.g. because the remote maps the response to a different port, as might happen on Azure), as long as the local port is 500 (85bfab621d). * Fixed an issue with DNS servers passed to NetworkManager in charon-nm (ee8c25516a). * Logged traffic selectors now always contain the protocol if either protocol or port are set (a36d8097ed). * Only the inbound SA/policy will be updated as reaction to IP address changes for rekeyed CHILD_SAs that are kept around. * The parser for strongswan.conf/swanctl.conf now accepts = characters in values without having to put the value in quotes (e.g. for Base64 encoded shared secrets). Notes for developers: * trap_manager_t: Trap policies are now unistalled by peer/child name and not the reqid. * No reqid is returned anymore when installing trap policies. * child_sa_t: A new state (CHILD_DELETED) is used for CHILD_SAs that have been deleted but not yet destroyed (after a rekeying CHILD_SAs are kept around for a while to process delayed packets). This way child_updown events are not triggered anymore for such SAs when an IKE_SA that has such CHILD_SAs assigned is deleted. Version 5.6.2 * Fixed a DoS vulnerability in the parser for PKCS#1 RSASSA-PSS signatures that was caused by insufficient input validation. One of the configurable parameters in algorithm identifier structures for RSASSA-PSS signatures is the mask generation function (MGF). Only MGF1 is currently specified for this purpose. However, this in turn takes itself a parameter that specifies the underlying hash function. strongSwan's parser did not correctly handle the case of this parameter being absent, causing an undefined data read. This vulnerability has been registered as CVE-2018-6459. * When rekeying IKEv2 IKE_SAs the previously negotiated DH group will be reused, instead of using the first configured group, which avoids an additional exchange if the peer previously selected a different DH group via INVALID_KE_PAYLOAD notify. The same is also done when rekeying CHILD_SAs except for the first rekeying of the CHILD_SA that was created with the IKE_SA, where no DH group was negotiated yet. Also, the selected DH group is moved to the front in all sent proposals that contain it and all proposals that don't are moved to the back in order to convey the preference for this group to the peer. * Handling of MOBIKE task queuing has been improved. In particular, the response to an address update (with NAT-D payloads) is not ignored anymore if only an address list update or DPD is queued as that could prevent updating the UDP encapsulation in the kernel. * On Linux, roam events may optionally be triggered by changes to the routing rules, which can be useful if routing rules (instead of e.g. route metrics) are used to switch from one to another interface (i.e. from one to another routing table). Since routing rules are currently not evaluated when doing route lookups this is only useful if the kernel-based route lookup is used (4664992f7d). * The fallback drop policies installed to avoid traffic leaks when replacing addresses in installed policies are now replaced by temporary drop policies, which also prevent acquires because we currently delete and reinstall IPsec SAs to update their addresses (35ef1b032d). * Access X.509 certificates held in non-volatile storage of a TPM 2.0 referenced via the NV index. Adding the --keyid parameter to pki --print allows to print private keys or certificates stored in a smartcard or a TPM 2.0. * Fixed proposal selection if a peer incorrectly sends DH groups in the ESP proposal during IKE_AUTH and also if a DH group is configured in the local ESP proposal and charon.prefer configured_proposals is disabled (d058fd3c32). * The lookup for PSK secrets for IKEv1 has been improved for certain scenarios (see #2497 for details). * MSKs received via RADIUS are now padded to 64 bytes to avoid compatibility issues with EAP-MSCHAPv2 and PRFs that have a block size < 64 bytes (e.g. AES-XCBC-PRF-128, see 73cbce6013). * The tpm_extendpcr command line tool extends a digest into a TPM PCR. * Ported the NetworkManager backend from the deprecated libnm-glib to libnm. * The save-keys debugging/development plugin saves IKE and/or ESP keys to files compatible with Wireshark. Version 5.6.1 * Several algorithms were removed from the default ESP/AH and IKE proposals in compliance with RFC 8221 and RFC 8247, respectively. Removed from the default ESP/AH proposal were the 3DES and Blowfish encryption algorithms and the HMAC-MD5 integrity algorithm. From the IKE default proposal the HMAC-MD5 integrity algorithm and the MODP-1024 Diffie-Hellman group were removed (the latter is significant for Windows clients in their default configuration). These algorithms may still be used in custom proposals. * Support for RSASSA-PSS signatures has been added. For compatibility with previous releases they are currently not used automatically, by default, to change that charon.rsa_pss may be enabled. To explicitly use or require such signatures during IKEv2 signature authentication (RFC 7427) ike:rsa/pss... authentication constraints may be used for specific connections (regardless of whether the strongswan.conf option above is enabled). Only the hash algorithm can be specified in such constraints, the MGF1 will be based on that hash and the salt length will equal the hash length (when verifying the salt length is not enforced). To enforce such signatures during PKI verification use rsa/pss... authentication constraints. * All pki commands that create certificates/CRLs can be made to sign with RSASSA-PSS instead of the classing PKCS#1 scheme with the --rsa-padding pss option. As with signatures during authentication, only the hash algorithm is configurable (via --digest option), the MGF1 will be based on that and the salt length will equal the hash length. * These signatures are supported by all RSA backends except pkcs11 (i.e. gmp, gcrypt, openssl). The gmp plugin requires the mgf1 plugin. Note that RSASSA-PSS algorithm identifiers and parameters in keys (public keys in certificates or private keys in PKCS#8 files) are currently not used as constraints. * The sec-updater tool checks for security updates in dpkg-based repositories (e.g. Debian/Ubuntu) and sets the security flags in the IMV policy database accordingly. Additionally for each new package version a SWID tag for the given OS and HW architecture is created and stored in the database. * Using the sec-updater.sh script template the lookup can be automated (e.g. via an hourly cron job). * When restarting an IKEv2 negotiation after receiving an INVALID_KE_PAYLOAD notify (or due to other reasons like too many retransmits) a new initiator SPI is allocated. This prevents issues caused by retransmits for IKE_SA_INIT messages. * Because the initiator SPI was previously reused when restarting the connection delayed responses for previous connection attempts were processed and might have caused fatal errors due to a failed DH negotiation or because of the internal retry counter in the ike-init task. For instance, if we proposed a DH group the responder rejected we might have later received delayed responses that either contained INVALID_KE_PAYLOAD notifies with the DH group we already switched to, or, if we retransmitted an IKE_SA_INIT with the requested group but then had to restart again, a KE payload with a group different from the one we proposed. * The introduction of file versions in the IMV database scheme broke file reference hash measurements. This has been fixed by creating generic product versions having an empty package name. * A new timeout option for the systime-fix plugin stops periodic system time checks after a while and enforces a certificate verification, closing or reauthenticating all SAs with invalid certificates. * The IKE event counters, previously only available via ipsec listcounters command, may now also be queried and reset via vici and the new swanctl --counters command. They are collected and provided by the optional counters plugin (enabled by default for backwards compatibility if the stroke plugin is built). * Class attributes received in RADIUS Access-Accept messages may optionally be added to RADIUS accounting messages (655924074b). * Basic support for systemd sockets has been added, which may be used for privilege separation (59db98fb94). * Inbound marks may optionally be installed in the SA again (was removed with 5.5.2) by enabling the mark_in_sa option in swanctl.conf. * The timeout of leases in pools configured via pool utility may be configured in other units than hours. INITIAL_CONTACT notifies are now only omitted if never is configured as uniqueness policy. * Outbound FWD policies for shunts are not installed anymore, by default (as is the case for other policies since 5.5.1). * Don't consider a DH group mismatch during CHILD_SA rekeying as failure as responder (e7276f78aa). * Handling of fragmented IPv4 and IPv6 packets in libipsec has been improved (e138003de9). * Trigger expire events for the correct IPsec SA in libipsec (6e861947a0). * A crash in CRL verification via openssl plugin using OpenSSL 1.1 has been fixed (78acaba6a1). * No hard-coded default proposals are passed from starter to the stroke plugin anymore (the IKE proposal used curve25519 since 5.5.2, which is an optional plugin). * A workaround for an issue with virtual IPs on macOS 10.13 (High Sierra) has been added (039b85dd43). * Handling of IKE_SA rekey collisions in charon-tkm has been fixed. * Instead of failing or just silently doing nothing unit tests may now warn about certain conditions (e.g. if a test was not executed due to external dependencies). This update was imported from the SUSE:SLE-15:Update update project. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.1: zypper in -t patch openSUSE-2020-403=1 Package List: - openSUSE Leap 15.1 (noarch): strongswan-doc-5.8.2-lp151.4.6.1 - openSUSE Leap 15.1 (x86_64): strongswan-5.8.2-lp151.4.6.1 strongswan-debuginfo-5.8.2-lp151.4.6.1 strongswan-debugsource-5.8.2-lp151.4.6.1 strongswan-hmac-5.8.2-lp151.4.6.1 strongswan-ipsec-5.8.2-lp151.4.6.1 strongswan-ipsec-debuginfo-5.8.2-lp151.4.6.1 strongswan-libs0-5.8.2-lp151.4.6.1 strongswan-libs0-debuginfo-5.8.2-lp151.4.6.1 strongswan-mysql-5.8.2-lp151.4.6.1 strongswan-mysql-debuginfo-5.8.2-lp151.4.6.1 strongswan-nm-5.8.2-lp151.4.6.1 strongswan-nm-debuginfo-5.8.2-lp151.4.6.1 strongswan-sqlite-5.8.2-lp151.4.6.1 strongswan-sqlite-debuginfo-5.8.2-lp151.4.6.1 References: https://www.suse.com/security/cve/CVE-2018-6459.html https://bugzilla.suse.com/1079548

1 0