September 2019 - openSUSE Updates - openSUSE Mailing Lists

openSUSE-RU-2019:2105-1: moderate: Recommended update for open-iscsi
by maintenance＠opensuse.org 09 Sep '19

09 Sep '19

openSUSE Recommended Update: Recommended update for open-iscsi ______________________________________________________________________________ Announcement ID: openSUSE-RU-2019:2105-1 Rating: moderate References: #1113712 Affected Products: openSUSE Leap 15.1 ______________________________________________________________________________ An update that has one recommended fix can now be installed. Description: This update for open-iscsi fixes the following issues: - Fixes an issue where an iSCSI boot failure appeared in MPIO config with single path active (bsc#1113712) Additionally: This update includes a lot of smaller bug fixes. Please refer to this rpm's changelog file to get the full list of all changes. This update was imported from the SUSE:SLE-15:Update update project. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.1: zypper in -t patch openSUSE-2019-2105=1 Package List: - openSUSE Leap 15.1 (i586 x86_64): iscsiuio-0.7.8.2-lp151.13.3.1 iscsiuio-debuginfo-0.7.8.2-lp151.13.3.1 libopeniscsiusr0_2_0-2.0.876-lp151.13.3.1 libopeniscsiusr0_2_0-debuginfo-2.0.876-lp151.13.3.1 open-iscsi-2.0.876-lp151.13.3.1 open-iscsi-debuginfo-2.0.876-lp151.13.3.1 open-iscsi-debugsource-2.0.876-lp151.13.3.1 open-iscsi-devel-2.0.876-lp151.13.3.1 References: https://bugzilla.suse.com/1113712

1 0

openSUSE-RU-2019:2103-1: moderate: Recommended update for open-iscsi
by maintenance＠opensuse.org 09 Sep '19

09 Sep '19

openSUSE Recommended Update: Recommended update for open-iscsi ______________________________________________________________________________ Announcement ID: openSUSE-RU-2019:2103-1 Rating: moderate References: #1113712 Affected Products: openSUSE Leap 15.0 ______________________________________________________________________________ An update that has one recommended fix can now be installed. Description: This update for open-iscsi fixes the following issues: - Fixes an issue where an iSCSI boot failure appeared in MPIO config with single path active (bsc#1113712) Additionally: This update includes a lot of smaller bug fixes. Please refer to this rpm's changelog file to get the full list of all changes. This update was imported from the SUSE:SLE-15:Update update project. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.0: zypper in -t patch openSUSE-2019-2103=1 Package List: - openSUSE Leap 15.0 (i586 x86_64): iscsiuio-0.7.8.2-lp150.9.16.1 iscsiuio-debuginfo-0.7.8.2-lp150.9.16.1 libopeniscsiusr0_2_0-2.0.876-lp150.9.16.1 libopeniscsiusr0_2_0-debuginfo-2.0.876-lp150.9.16.1 open-iscsi-2.0.876-lp150.9.16.1 open-iscsi-debuginfo-2.0.876-lp150.9.16.1 open-iscsi-debugsource-2.0.876-lp150.9.16.1 open-iscsi-devel-2.0.876-lp150.9.16.1 References: https://bugzilla.suse.com/1113712

1 0

openSUSE-RU-2019:2102-1: moderate: Recommended update for google-compute-engine
by maintenance＠opensuse.org 09 Sep '19

09 Sep '19

openSUSE Recommended Update: Recommended update for google-compute-engine ______________________________________________________________________________ Announcement ID: openSUSE-RU-2019:2102-1 Rating: moderate References: #1144092 #1144170 #1146172 Affected Products: openSUSE Leap 15.1 ______________________________________________________________________________ An update that has three recommended fixes can now be installed. Description: This update for google-compute-engine fixes the following issues: - updated to version 20190801 (bsc#1144092, bsc#1144170) * Fix for 2FA on RHEL 8 * Support for Debian 10 * Support for Google Private Access over IPv6 * Support root disk expansion in RHEL 8 and Debian 10 Some more minor bug fixes were included in this maintenance update. The full list can be retrieved from this rpm's changelog file. - Fix install location of NSS and PAM shared libraries (bsc#1146172) - Switch RPM group for oslogin package from Hardware to System/Daemons This update was imported from the SUSE:SLE-15:Update update project. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.1: zypper in -t patch openSUSE-2019-2102=1 Package List: - openSUSE Leap 15.1 (x86_64): google-compute-engine-debugsource-20190801-lp151.2.10.1 google-compute-engine-oslogin-20190801-lp151.2.10.1 google-compute-engine-oslogin-debuginfo-20190801-lp151.2.10.1 - openSUSE Leap 15.1 (noarch): google-compute-engine-init-20190801-lp151.2.10.1 References: https://bugzilla.suse.com/1144092 https://bugzilla.suse.com/1144170 https://bugzilla.suse.com/1146172

1 0

openSUSE-RU-2019:2106-1: moderate: Recommended update for SUSEConnect
by maintenance＠opensuse.org 09 Sep '19

09 Sep '19

openSUSE Recommended Update: Recommended update for SUSEConnect ______________________________________________________________________________ Announcement ID: openSUSE-RU-2019:2106-1 Rating: moderate References: #1128969 #1136752 #1144020 Affected Products: openSUSE Leap 15.1 ______________________________________________________________________________ An update that has three recommended fixes can now be installed. Description: This update for SUSEConnect fixes the following issues: - Fix failing on registered system without arguments (bsc#1144020) - Fix base product service removal during de-registration in public clouds (bsc#1136752) - It will no longer try to remove a service during migration if a zypper service plugin already exists (bsc#1128969) This update was imported from the SUSE:SLE-15-SP1:Update update project. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.1: zypper in -t patch openSUSE-2019-2106=1 Package List: - openSUSE Leap 15.1 (x86_64): SUSEConnect-0.3.19-lp151.2.3.1 References: https://bugzilla.suse.com/1128969 https://bugzilla.suse.com/1136752 https://bugzilla.suse.com/1144020

1 0

openSUSE-RU-2019:2104-1: moderate: Recommended update for perf
by maintenance＠opensuse.org 09 Sep '19

09 Sep '19

openSUSE Recommended Update: Recommended update for perf ______________________________________________________________________________ Announcement ID: openSUSE-RU-2019:2104-1 Rating: moderate References: #1124370 Affected Products: openSUSE Leap 15.0 ______________________________________________________________________________ An update that has one recommended fix can now be installed. Description: This update for perf provides the following fixes: - Add POWER mem/c2c support. (FATE#326869, bsc#1124370) (Initial implementation was as FATE#326866 in SLE15-SP1) This update was imported from the SUSE:SLE-15:Update update project. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.0: zypper in -t patch openSUSE-2019-2104=1 Package List: - openSUSE Leap 15.0 (x86_64): perf-4.12.14-lp150.8.10.1 perf-debuginfo-4.12.14-lp150.8.10.1 perf-debugsource-4.12.14-lp150.8.10.1 References: https://bugzilla.suse.com/1124370

1 0

openSUSE-RU-2019:2100-1: moderate: Recommended update for yast2-firstboot
by maintenance＠opensuse.org 09 Sep '19

09 Sep '19

openSUSE Recommended Update: Recommended update for yast2-firstboot ______________________________________________________________________________ Announcement ID: openSUSE-RU-2019:2100-1 Rating: moderate References: #1140199 Affected Products: openSUSE Leap 15.1 ______________________________________________________________________________ An update that has one recommended fix can now be installed. Description: This update for yast2-firstboot fixes the following issue: - AutoYaST: automatic installation results in lan and ntp-client module failure (bsc#1140199) This update was imported from the SUSE:SLE-15-SP1:Update update project. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.1: zypper in -t patch openSUSE-2019-2100=1 Package List: - openSUSE Leap 15.1 (noarch): yast2-firstboot-4.1.8-lp151.2.6.1 References: https://bugzilla.suse.com/1140199

1 0

openSUSE-RU-2019:2101-1: moderate: Recommended update for google-compute-engine
by maintenance＠opensuse.org 09 Sep '19

09 Sep '19

openSUSE Recommended Update: Recommended update for google-compute-engine ______________________________________________________________________________ Announcement ID: openSUSE-RU-2019:2101-1 Rating: moderate References: #1144092 #1144170 #1146172 Affected Products: openSUSE Leap 15.0 ______________________________________________________________________________ An update that has three recommended fixes can now be installed. Description: This update for google-compute-engine fixes the following issues: - updated to version 20190801 (bsc#1144092, bsc#1144170) * Fix for 2FA on RHEL 8 * Support for Debian 10 * Support for Google Private Access over IPv6 * Support root disk expansion in RHEL 8 and Debian 10 Some more minor bug fixes were included in this maintenance update. The full list can be retrieved from this rpm's changelog file. - Fix install location of NSS and PAM shared libraries (bsc#1146172) - Switch RPM group for oslogin package from Hardware to System/Daemons This update was imported from the SUSE:SLE-15:Update update project. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.0: zypper in -t patch openSUSE-2019-2101=1 Package List: - openSUSE Leap 15.0 (x86_64): google-compute-engine-debugsource-20190801-lp150.2.26.1 google-compute-engine-oslogin-20190801-lp150.2.26.1 google-compute-engine-oslogin-debuginfo-20190801-lp150.2.26.1 - openSUSE Leap 15.0 (noarch): google-compute-engine-init-20190801-lp150.2.26.1 References: https://bugzilla.suse.com/1144092 https://bugzilla.suse.com/1144170 https://bugzilla.suse.com/1146172

1 0

openSUSE-RU-2019:2098-1: moderate: Recommended update for habootstrap-formula, python-shaptools, saphanabootstrap-formula
by maintenance＠opensuse.org 09 Sep '19

09 Sep '19

openSUSE Recommended Update: Recommended update for habootstrap-formula, python-shaptools, saphanabootstrap-formula ______________________________________________________________________________ Announcement ID: openSUSE-RU-2019:2098-1 Rating: moderate References: #1137989 #1142306 Affected Products: openSUSE Backports SLE-15-SP1 openSUSE Backports SLE-15 ______________________________________________________________________________ An update that has two recommended fixes can now be installed. Description: This update for habootstrap-formula, python-shaptools, saphanabootstrap-formula fixes the following issues: python-shaptools was updated to version 0.3.1: - Add support for Power machines (jsc#SLE-4031, jsc#SLE-4143, boo#1137989) - Add an option to run the commands in remote nodes to shapcli - shapcli is provided to expose shaptools api methods as command line tool - Add support for Power machines - Add an option to run the commands in remote nodes to shapcli - shapcli is provided to expose shaptools api methods as command line tool habootstrap-formula was updated to version 0.2.4: - Fix issue with file permissions during package installation in /usr/share/salt-formulas (boo#1142306) - Make pkg.install more resilient, allowing retries during install - Change the salt-formula directories permissions to 0750 to avoid conflicts with the package salt-standalone-formulas-configuration. - Correct the required package name to salt-standalone-formulas-configuration saphanabootstrap-formula was updated to version 0.2.9: - Fix srHook script usage for cost optimized scenario - Add scenario type options to the form.yml file (boo#1137989) - Fix errors in the form.yml file to match with the formula names - Fix some styling issues - Add support for Power machines - Fix issues with SAP HANA deployment template and the exporter - Fix issue with file permissions during package installation in /usr/share/salt-formulas (boo#1142306) - Retry pkg.install multiple times, in case a pkg installtion fails for having a more resilient installation. - hanadb_exporter executed as a daemon - hanadb_exporter installation suggested - Change the salt-formula directories permissions to 0750 to avoid conflicts with the package salt-standalone-formulas-configuration. - Correct the required package name to salt-standalone-formulas-configuration - supporting hanadb_exporter logging system - adding hanadb_exporter deployment This update was imported from the openSUSE:Leap:15.0:Update update project. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Backports SLE-15-SP1: zypper in -t patch openSUSE-2019-2098=1 - openSUSE Backports SLE-15: zypper in -t patch openSUSE-2019-2098=1 Package List: - openSUSE Backports SLE-15-SP1 (noarch): habootstrap-formula-0.2.4-bp151.5.1 python2-shaptools-0.3.1-bp151.5.1 python3-shaptools-0.3.1-bp151.5.1 saphanabootstrap-formula-0.2.9-bp151.5.1 - openSUSE Backports SLE-15 (noarch): habootstrap-formula-0.2.4-bp150.5.1 python2-shaptools-0.3.1-bp150.5.1 python3-shaptools-0.3.1-bp150.5.1 saphanabootstrap-formula-0.2.9-bp150.5.1 References: https://bugzilla.suse.com/1137989 https://bugzilla.suse.com/1142306

1 0

openSUSE-RU-2019:2099-1: moderate: Recommended update for SUSEConnect
by maintenance＠opensuse.org 09 Sep '19

09 Sep '19

openSUSE Recommended Update: Recommended update for SUSEConnect ______________________________________________________________________________ Announcement ID: openSUSE-RU-2019:2099-1 Rating: moderate References: #1136752 #1144020 Affected Products: openSUSE Leap 15.0 ______________________________________________________________________________ An update that has two recommended fixes can now be installed. Description: This update for SUSEConnect fixes the following issues: - Fix failing on registered system without arguments (bsc#1144020) - Fix base product service removal during de-registration in public clouds (bsc#1136752) This update was imported from the SUSE:SLE-15:Update update project. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.0: zypper in -t patch openSUSE-2019-2099=1 Package List: - openSUSE Leap 15.0 (x86_64): SUSEConnect-0.3.19-lp150.2.17.1 References: https://bugzilla.suse.com/1136752 https://bugzilla.suse.com/1144020

1 0

openSUSE-RU-2019:2097-1: moderate: Recommended update for devscripts
by maintenance＠opensuse.org 09 Sep '19

09 Sep '19

openSUSE Recommended Update: Recommended update for devscripts ______________________________________________________________________________ Announcement ID: openSUSE-RU-2019:2097-1 Rating: moderate References: Affected Products: openSUSE Leap 15.1 ______________________________________________________________________________ An update that has 0 recommended fixes can now be installed. Description: This update for devscripts fixes the following issues: Update to version 2.18.10: * See /usr/share/doc/packages/devscripts/changelog Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.1: zypper in -t patch openSUSE-2019-2097=1 Package List: - openSUSE Leap 15.1 (i586 x86_64): devscripts-2.19.5-lp151.3.5.1 devscripts-debuginfo-2.19.5-lp151.3.5.1 - openSUSE Leap 15.1 (noarch): checkbashisms-2.19.5-lp151.3.5.1 References:

1 0