November 2018 - openSUSE Updates - openSUSE Mailing Lists

openSUSE-SU-2018:3825-1: important: Security update for squid
by opensuse-security＠opensuse.org 20 Nov '18

20 Nov '18

openSUSE Security Update: Security update for squid ______________________________________________________________________________ Announcement ID: openSUSE-SU-2018:3825-1 Rating: important References: #1082318 #1112066 #1112695 #1113668 #1113669 Cross-References: CVE-2018-19131 CVE-2018-19132 Affected Products: openSUSE Leap 42.3 ______________________________________________________________________________ An update that solves two vulnerabilities and has three fixes is now available. Description: This update for squid fixes the following issues: Security issues fixed: - CVE-2018-19131: Fixed Cross-Site-Scripting vulnerability in the TLS error handling (bsc#1113668). - CVE-2018-19132: Fixed small memory leak in processing of SNMP packets (bsc#1113669). Non-security issues fixed: - Create runtime directories needed when SMP mode is enabled (bsc#1112695, bsc#1112066). - Install license correctly (bsc#1082318). Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 42.3: zypper in -t patch openSUSE-2018-1428=1 Package List: - openSUSE Leap 42.3 (i586 x86_64): squid-3.5.21-18.1 squid-debuginfo-3.5.21-18.1 squid-debugsource-3.5.21-18.1 References: https://www.suse.com/security/cve/CVE-2018-19131.html https://www.suse.com/security/cve/CVE-2018-19132.html https://bugzilla.suse.com/1082318 https://bugzilla.suse.com/1112066 https://bugzilla.suse.com/1112695 https://bugzilla.suse.com/1113668 https://bugzilla.suse.com/1113669

1 0

openSUSE-SU-2018:3824-1: moderate: Security update for GraphicsMagick
by opensuse-security＠opensuse.org 20 Nov '18

20 Nov '18

openSUSE Security Update: Security update for GraphicsMagick ______________________________________________________________________________ Announcement ID: openSUSE-SU-2018:3824-1 Rating: moderate References: #1113064 Cross-References: CVE-2018-18544 Affected Products: openSUSE Leap 15.0 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: This update for GraphicsMagick fixes the following issues: Security issue fixed: - CVE-2018-18544: Fixed memory leak in the function WriteMSLImage of coders/msl.c (bsc#1113064). Non-security issues fixed: - asan_build: build ASAN included - debug_build: build more suitable for debugging Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.0: zypper in -t patch openSUSE-2018-1431=1 Package List: - openSUSE Leap 15.0 (x86_64): GraphicsMagick-1.3.29-lp150.3.15.1 GraphicsMagick-debuginfo-1.3.29-lp150.3.15.1 GraphicsMagick-debugsource-1.3.29-lp150.3.15.1 GraphicsMagick-devel-1.3.29-lp150.3.15.1 libGraphicsMagick++-Q16-12-1.3.29-lp150.3.15.1 libGraphicsMagick++-Q16-12-debuginfo-1.3.29-lp150.3.15.1 libGraphicsMagick++-devel-1.3.29-lp150.3.15.1 libGraphicsMagick-Q16-3-1.3.29-lp150.3.15.1 libGraphicsMagick-Q16-3-debuginfo-1.3.29-lp150.3.15.1 libGraphicsMagick3-config-1.3.29-lp150.3.15.1 libGraphicsMagickWand-Q16-2-1.3.29-lp150.3.15.1 libGraphicsMagickWand-Q16-2-debuginfo-1.3.29-lp150.3.15.1 perl-GraphicsMagick-1.3.29-lp150.3.15.1 perl-GraphicsMagick-debuginfo-1.3.29-lp150.3.15.1 References: https://www.suse.com/security/cve/CVE-2018-18544.html https://bugzilla.suse.com/1113064

1 0

openSUSE-SU-2018:3819-1: Security update for libmatroska, mkvtoolnix
by opensuse-security＠opensuse.org 20 Nov '18

20 Nov '18

openSUSE Security Update: Security update for libmatroska, mkvtoolnix ______________________________________________________________________________ Announcement ID: openSUSE-SU-2018:3819-1 Rating: low References: #1113709 Cross-References: CVE-2018-4022 Affected Products: openSUSE Leap 42.3 openSUSE Leap 15.0 openSUSE Backports SLE-15 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: This update for libmatroska, mkvtoolnix fixes the following issues: Security issue fixed: - CVE-2018-4022: Fixed use-after-free vulnerability that existed in the way MKV (matroska) file format was handled (bsc#1113709). Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 42.3: zypper in -t patch openSUSE-2018-1432=1 - openSUSE Leap 15.0: zypper in -t patch openSUSE-2018-1432=1 - openSUSE Backports SLE-15: zypper in -t patch openSUSE-2018-1432=1 Package List: - openSUSE Leap 42.3 (i586 x86_64): libmatroska-debugsource-1.4.9-4.3.1 libmatroska-devel-1.4.9-4.3.1 libmatroska6-1.4.9-4.3.1 libmatroska6-debuginfo-1.4.9-4.3.1 - openSUSE Leap 42.3 (x86_64): libmatroska6-32bit-1.4.9-4.3.1 libmatroska6-debuginfo-32bit-1.4.9-4.3.1 mkvtoolnix-28.2.0-8.1 mkvtoolnix-debuginfo-28.2.0-8.1 mkvtoolnix-debugsource-28.2.0-8.1 mkvtoolnix-gui-28.2.0-8.1 mkvtoolnix-gui-debuginfo-28.2.0-8.1 - openSUSE Leap 15.0 (x86_64): mkvtoolnix-28.2.0-lp150.2.3.1 mkvtoolnix-debuginfo-28.2.0-lp150.2.3.1 mkvtoolnix-debugsource-28.2.0-lp150.2.3.1 mkvtoolnix-gui-28.2.0-lp150.2.3.1 mkvtoolnix-gui-debuginfo-28.2.0-lp150.2.3.1 - openSUSE Backports SLE-15 (aarch64 ppc64le s390x x86_64): mkvtoolnix-28.2.0-bp150.2.3.1 mkvtoolnix-debuginfo-28.2.0-bp150.2.3.1 mkvtoolnix-debugsource-28.2.0-bp150.2.3.1 mkvtoolnix-gui-28.2.0-bp150.2.3.1 mkvtoolnix-gui-debuginfo-28.2.0-bp150.2.3.1 References: https://www.suse.com/security/cve/CVE-2018-4022.html https://bugzilla.suse.com/1113709

1 0

openSUSE-SU-2018:3818-1: important: Security update for squid
by opensuse-security＠opensuse.org 20 Nov '18

20 Nov '18

openSUSE Security Update: Security update for squid ______________________________________________________________________________ Announcement ID: openSUSE-SU-2018:3818-1 Rating: important References: #1082318 #1112066 #1112695 #1113668 #1113669 Cross-References: CVE-2018-19131 CVE-2018-19132 Affected Products: openSUSE Leap 15.0 ______________________________________________________________________________ An update that solves two vulnerabilities and has three fixes is now available. Description: This update for squid fixes the following issues: Security issues fixed: - CVE-2018-19131: Fixed Cross-Site-Scripting vulnerability in the TLS error handling (bsc#1113668). - CVE-2018-19132: Fixed small memory leak in processing of SNMP packets (bsc#1113669). Non-security issues fixed: - Create runtime directories needed when SMP mode is enabled (bsc#1112695, bsc#1112066). - Install license correctly (bsc#1082318). This update was imported from the SUSE:SLE-15:Update update project. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.0: zypper in -t patch openSUSE-2018-1429=1 Package List: - openSUSE Leap 15.0 (x86_64): squid-4.4-lp150.4.3.2 squid-debuginfo-4.4-lp150.4.3.2 squid-debugsource-4.4-lp150.4.3.2 References: https://www.suse.com/security/cve/CVE-2018-19131.html https://www.suse.com/security/cve/CVE-2018-19132.html https://bugzilla.suse.com/1082318 https://bugzilla.suse.com/1112066 https://bugzilla.suse.com/1112695 https://bugzilla.suse.com/1113668 https://bugzilla.suse.com/1113669

1 0

openSUSE-SU-2018:3817-1: important: Security update for the Linux Kernel
by opensuse-security＠opensuse.org 20 Nov '18

20 Nov '18

openSUSE Security Update: Security update for the Linux Kernel ______________________________________________________________________________ Announcement ID: openSUSE-SU-2018:3817-1 Rating: important References: #1011920 #1012382 #1012422 #1020645 #1031392 #1035053 #1042422 #1043591 #1048129 #1050431 #1053043 #1054239 #1057199 #1062303 #1065600 #1065726 #1067906 #1073579 #1076393 #1078788 #1079524 #1083215 #1083527 #1084760 #1091158 #1093118 #1094825 #1095805 #1098050 #1098996 #1101555 #1104124 #1105025 #1105931 #1106110 #1106359 #1106594 #1106913 #1106929 #1107060 #1107299 #1107535 #1107870 #1108377 #1108498 #1109158 #1109772 #1109784 #1109818 #1109907 #1109919 #1109923 #1110006 #1111516 #1111870 #1112007 #1112262 #1112263 #1112894 #1112902 #1112903 #1112905 #1113667 #1113751 #1113769 #1114178 #1114229 #1114648 #1115587 #981083 #997172 Cross-References: CVE-2018-18281 CVE-2018-18386 CVE-2018-18690 CVE-2018-18710 CVE-2018-9516 Affected Products: openSUSE Leap 42.3 ______________________________________________________________________________ An update that solves 5 vulnerabilities and has 66 fixes is now available. Description: The openSUSE Leap 42.3 kernel was updated to 4.4.162 to receive various security and bugfixes. The following security bugs were fixed: - CVE-2018-18281: The mremap() syscall performs TLB flushes after dropping pagetable locks. If a syscall such as ftruncate() removes entries from the pagetables of a task that is in the middle of mremap(), a stale TLB entry can remain for a short time that permits access to a physical page after it has been released back to the page allocator and reused. (bnc#1113769). - CVE-2018-18710: An information leak in cdrom_ioctl_select_disc in drivers/cdrom/cdrom.c could be used by local attackers to read kernel memory because a cast from unsigned long to int interferes with bounds checking. This is similar to CVE-2018-10940 and CVE-2018-16658 (bnc#1113751). - CVE-2018-18690: A local attacker able to set attributes on an xfs filesystem could make this filesystem non-operational until the next mount by triggering an unchecked error condition during an xfs attribute change, because xfs_attr_shortform_addname in fs/xfs/libxfs/xfs_attr.c mishandled ATTR_REPLACE operations with conversion of an attr from short to long form (bnc#1105025). - CVE-2018-18386: drivers/tty/n_tty.c allowed local attackers (who are able to access pseudo terminals) to hang/block further usage of any pseudo terminal devices due to an EXTPROC versus ICANON confusion in TIOCINQ (bnc#1094825). - CVE-2018-9516: A lack of certain checks in the hid_debug_events_read() function in the drivers/hid/hid-debug.c file might have resulted in receiving userspace buffer overflow and an out-of-bounds write or to the infinite loop. (bnc#1108498). The following non-security bugs were fixed: - 6lowpan: iphc: reset mac_header after decompress to fix panic (bnc#1012382). - Add azure kernel description. - Add bug reference to patches.suse/x86-entry-64-use-a-per-cpu-trampoline-stack-fix1.patch - Add graphviz to buildreq for image conversion - Add reference to bsc#1104124 to patches.fixes/fs-aio-fix-the-increment-of-aio-nr-and-counting-agai.patch - ALSA: hda: Add AZX_DCAPS_PM_RUNTIME for AMD Raven Ridge (bnc#1012382). - ALSA: hda/realtek - Cannot adjust speaker's volume on Dell XPS 27 7760 (bnc#1012382). - apparmor: remove no-op permission check in policy_unpack (git-fixes). - ARC: build: Get rid of toolchain check (bnc#1012382). - ARC: clone syscall to setp r25 as thread pointer (bnc#1012382). - arch/hexagon: fix kernel/dma.c build warning (bnc#1012382). - arch-symbols: use bash as interpreter since the script uses bashism. - arm64: cpufeature: Track 32bit EL0 support (bnc#1012382). - arm64: jump_label.h: use asm_volatile_goto macro instead of "asm goto" (bnc#1012382). - arm64: KVM: Sanitize PSTATE.M when being set from userspace (bnc#1012382). - arm64: KVM: Tighten guest core register access from userspace (bnc#1012382). - ARM: dts: at91: add new compatibility string for macb on sama5d3 (bnc#1012382). - ARM: dts: dra7: fix DCAN node addresses (bnc#1012382). - ARM: mvebu: declare asm symbols as character arrays in pmsu.c (bnc#1012382). - ASoC: dapm: Fix potential DAI widget pointer deref when linking DAIs (bnc#1012382). - ASoC: sigmadsp: safeload should not have lower byte limit (bnc#1012382). - ASoC: wm8804: Add ACPI support (bnc#1012382). - ath10k: fix scan crash due to incorrect length calculation (bnc#1012382). - ath10k: fix use-after-free in ath10k_wmi_cmd_send_nowait (bnc#1012382). - ath10k: protect ath10k_htt_rx_ring_free with rx_ring.lock (bnc#1012382). - Bluetooth: Add a new Realtek 8723DE ID 0bda:b009 (bnc#1012382). - bnxt_en: Fix TX timeout during netpoll (bnc#1012382). - bonding: avoid possible dead-lock (bnc#1012382). - bpf: fix cb access in socket filter programs on tail calls (bsc#1012382). - bpf: fix map not being uncharged during map creation failure (bsc#1012382). - bpf, s390: fix potential memleak when later bpf_jit_prog fails (git-fixes). - bpf, s390x: do not reload skb pointers in non-skb context (git-fixes). - bsc#1106913: Replace with upstream variants Delete patches.suse/11-x86-mm-only-set-ibpb-when-the-new-thread-cannot-ptrace-curr ent-thread.patch. - bs-upload-kernel: do not set %opensuse_bs Since SLE15 it is not set in the distribution project so do not set it for kernel projects either. - btrfs: add a comp_refs() helper (dependency for bsc#1031392). - btrfs: add missing initialization in btrfs_check_shared (Git-fixes bsc#1112262). - btrfs: add tracepoints for outstanding extents mods (dependency for bsc#1031392). - btrfs: add wrapper for counting BTRFS_MAX_EXTENT_SIZE (dependency for bsc#1031392). - btrfs: cleanup extent locking sequence (dependency for bsc#1031392). - btrfs: defrag: use btrfs_mod_outstanding_extents in cluster_pages_for_defrag (Follow up fixes for bsc#1031392). - btrfs: delayed-inode: Remove wrong qgroup meta reservation calls (bsc#1031392). - btrfs: delayed-inode: Use new qgroup meta rsv for delayed inode and item (bsc#1031392). - btrfs: Enhance btrfs_trim_fs function to handle error better (Dependency for bsc#1113667). - btrfs: Ensure btrfs_trim_fs can trim the whole filesystem (bsc#1113667). - btrfs: fix error handling in btrfs_dev_replace_start (bsc#1107535). - Btrfs: fix invalid attempt to free reserved space on failure to cow range (dependency for bsc#1031392). - btrfs: fix missing error return in btrfs_drop_snapshot (Git-fixes bsc#1109919). - btrfs: Fix race condition between delayed refs and blockgroup removal (Git-fixes bsc#1112263). - btrfs: Fix wrong btrfs_delalloc_release_extents parameter (bsc#1031392). - Btrfs: kill trans in run_delalloc_nocow and btrfs_cross_ref_exist (dependency for bsc#1031392). - btrfs: make the delalloc block rsv per inode (dependency for bsc#1031392). - Btrfs: pass delayed_refs directly to btrfs_find_delayed_ref_head (dependency for bsc#1031392). - btrfs: qgroup: Add quick exit for non-fs extents (dependency for bsc#1031392). - btrfs: qgroup: Cleanup btrfs_qgroup_prepare_account_extents function (dependency for bsc#1031392). - btrfs: qgroup: Cleanup the remaining old reservation counters (bsc#1031392). - btrfs: qgroup: Commit transaction in advance to reduce early EDQUOT (bsc#1031392). - btrfs: qgroup: Do not use root->qgroup_meta_rsv for qgroup (bsc#1031392). - btrfs: qgroup: Fix wrong qgroup reservation update for relationship modification (bsc#1031392). - btrfs: qgroup: Introduce function to convert META_PREALLOC into META_PERTRANS (bsc#1031392). - btrfs: qgroup: Introduce helpers to update and access new qgroup rsv (bsc#1031392). - btrfs: qgroup: Make qgroup_reserve and its callers to use separate reservation type (bsc#1031392). - btrfs: qgroup: Skeleton to support separate qgroup reservation type (bsc#1031392). - btrfs: qgroups: opencode qgroup_free helper (dependency for bsc#1031392). - btrfs: qgroup: Split meta rsv type into meta_prealloc and meta_pertrans (bsc#1031392). - btrfs: qgroup: Update trace events for metadata reservation (bsc#1031392). - btrfs: qgroup: Update trace events to use new separate rsv types (bsc#1031392). - btrfs: qgroup: Use independent and accurate per inode qgroup rsv (bsc#1031392). - btrfs: qgroup: Use root::qgroup_meta_rsv_* to record qgroup meta reserved space (bsc#1031392). - btrfs: qgroup: Use separate meta reservation type for delalloc (bsc#1031392). - btrfs: remove type argument from comp_tree_refs (dependency for bsc#1031392). - Btrfs: rework outstanding_extents (dependency for bsc#1031392). - btrfs: switch args for comp_*_refs (dependency for bsc#1031392). - btrfs: Take trans lock before access running trans in check_delayed_ref (Follow up fixes for bsc#1031392). - ceph: avoid a use-after-free in ceph_destroy_options() (bsc#1112007). - cfg80211: fix a type issue in ieee80211_chandef_to_operating_class() (bnc#1012382). - cfg80211: nl80211_update_ft_ies() to validate NL80211_ATTR_IE (bnc#1012382). - cgroup: Fix deadlock in cpu hotplug path (bnc#1012382). - cgroup, netclassid: add a preemption point to write_classid (bnc#1098996). - CIFS: check for STATUS_USER_SESSION_DELETED (bsc#1112902). - cifs: connect to servername instead of IP for IPC$ share (bsc#1106359). - cifs: fix memory leak in SMB2_open() (bsc#1112894). - cifs: Fix use after free of a mid_q_entry (bsc#1112903). - cifs: read overflow in is_valid_oplock_break() (bnc#1012382). - clocksource/drivers/ti-32k: Add CLOCK_SOURCE_SUSPEND_NONSTOP flag for non-am43 SoCs (bnc#1012382). - config.sh: set BUGZILLA_PRODUCT for SLE12-SP3 - crypto: mxs-dcp - Fix wait logic on chan threads (bnc#1012382). - crypto: skcipher - Fix -Wstringop-truncation warnings (bnc#1012382). - Define dependencies of in-kernel KMPs statically This allows us to use rpm's internal dependency generator (bsc#981083). - dm cache: fix resize crash if user does not reload cache table (bnc#1012382). - dm thin metadata: fix __udivdi3 undefined on 32-bit (bnc#1012382). - dm thin metadata: try to avoid ever aborting transactions (bnc#1012382). - Do not ship firmware (bsc#1054239). Pull firmware from kernel-firmware instead. - drivers/tty: add error handling for pcmcia_loop_config (bnc#1012382). - drm/amdgpu: Fix SDMA HQD destroy error on gfx_v7 (bnc#1012382). - drm/nouveau/TBDdevinit: do not fail when PMU/PRE_OS is missing from VBIOS (bnc#1012382). - drm/virtio: fix bounds check in virtio_gpu_cmd_get_capset() (bsc#1106929) - Drop dtb-source.spec and move the sources to kernel-source (bsc#1011920) - Drop multiversion(kernel) from the KMP template () - e1000: check on netif_running() before calling e1000_up() (bnc#1012382). - e1000: ensure to free old tx/rx rings in set_ringparam() (bnc#1012382). - ebtables: arpreply: Add the standard target sanity check (bnc#1012382). - EDAC, thunderx: Fix memory leak in thunderx_l2c_threaded_isr() (bsc#1114648). - Enable kernel-obs-{build,qa} also in the vanilla branches - ethtool: restore erroneously removed break in dev_ethtool (bsc#1114229). - fbdev: fix broken menu dependencies (bsc#1106929) - fbdev/omapfb: fix omapfb_memory_read infoleak (bnc#1012382). - Fix file list to remove REPORTING-BUGS - Fix html and pdf creation in Documetation/media/* - floppy: Do not copy a kernel pointer to user memory in FDGETPRM ioctl (bnc#1012382). - fs/cifs: do not translate SFM_SLASH (U+F026) to backslash (bnc#1012382). - fs/cifs: suppress a string overflow warning (bnc#1012382). - gpio: adp5588: Fix sleep-in-atomic-context bug (bnc#1012382). - hexagon: modify ffs() and fls() to return int (bnc#1012382). - HID: hid-ntrig: add error handling for sysfs_create_group (bnc#1012382). - housekeeping: btrfs selftests: fold backport fix into backport patch - housekeeping: move btrfs patches to sorted section. No code changes. - hv: avoid crash in vmbus sysfs files (bnc#1108377). - hwmon: (adt7475) Make adt7475_read_word() return errors (bnc#1012382). - hwmon: (ina2xx) fix sysfs shunt resistor read access (bnc#1012382). - hwrng: core - document the quality field (git-fixes). - i2c: i2c-scmi: fix for i2c_smbus_write_block_data (bnc#1012382). - i2c: i801: Allow ACPI AML access I/O ports not reserved for SMBus (bnc#1012382). - i2c: uniphier-f: issue STOP only for last message or I2C_M_STOP (bnc#1012382). - i2c: uniphier: issue STOP only for last message or I2C_M_STOP (bnc#1012382). - IB/srp: Avoid that sg_reset -d ${srp_device} triggers an infinite loop (bnc#1012382). - Input: atakbd - fix Atari CapsLock behaviour (bnc#1012382). - Input: atakbd - fix Atari keymap (bnc#1012382). - Input: elantech - enable middle button of touchpad on ThinkPad P72 (bnc#1012382). - ip6_tunnel: be careful when accessing the inner header (bnc#1012382). - ip_tunnel: be careful when accessing the inner header (bnc#1012382). - ipv4: fix use-after-free in ip_cmsg_recv_dstaddr() (bnc#1012382). - ixgbe: pci_set_drvdata must be called before register_netdev (Git-fixes bsc#1109923). - jffs2: return -ERANGE when xattr buffer is too small (bnc#1012382). - KVM: PPC: Book3S HV: Do not truncate HPTE index in xlate function (bnc#1012382). - KVM: x86: remove eager_fpu field of struct kvm_vcpu_arch (bnc#1012382). - lib/test_hexdump.c: fix failure on big endian cpu (bsc#1106110). - mac80211: correct use of IEEE80211_VHT_CAP_RXSTBC_X (bnc#1012382). - mac80211: fix a race between restart and CSA flows (bnc#1012382). - mac80211: fix setting IEEE80211_KEY_FLAG_RX_MGMT for AP mode keys (bnc#1012382). - mac80211: Fix station bandwidth setting after channel switch (bnc#1012382). - mac80211_hwsim: correct use of IEEE80211_VHT_CAP_RXSTBC_X (bnc#1012382). - mac80211: mesh: fix HWMP sequence numbering to follow standard (bnc#1012382). - mac80211: shorten the IBSS debug messages (bnc#1012382). - mach64: detect the dot clock divider correctly on sparc (bnc#1012382). - md-cluster: clear another node's suspend_area after the copy is finished (bnc#1012382). - media: af9035: prevent buffer overflow on write (bnc#1012382). - media: exynos4-is: Prevent NULL pointer dereference in __isp_video_try_fmt() (bnc#1012382). - media: fsl-viu: fix error handling in viu_of_probe() (bnc#1012382). - media: omap3isp: zero-initialize the isp cam_xclk{a,b} initial data (bnc#1012382). - media: omap_vout: Fix a possible null pointer dereference in omap_vout_open() (bsc#1050431). - media: s3c-camif: ignore -ENOIOCTLCMD from v4l2_subdev_call for s_power (bnc#1012382). - media: soc_camera: ov772x: correct setting of banding filter (bnc#1012382). - media: tm6000: add error handling for dvb_register_adapter (bnc#1012382). - media: uvcvideo: Support realtek's UVC 1.5 device (bnc#1012382). - media: v4l: event: Prevent freeing event subscriptions while accessed (bnc#1012382). - media: videobuf-dma-sg: Fix dma_{sync,unmap}_sg() calls (bsc#1050431). - memory_hotplug: cond_resched in __remove_pages (bnc#1114178). - mfd: omap-usb-host: Fix dts probe of children (bnc#1012382). - mm: madvise(MADV_DODUMP): allow hugetlbfs pages (bnc#1012382). - mm: /proc/pid/pagemap: hide swap entries from unprivileged users (Git-fixes bsc#1109907). - mm/vmstat.c: fix outdated vmstat_text (bnc#1012382). - mm/vmstat.c: skip NR_TLB_REMOTE_FLUSH* properly (bnc#1012382). - mm/vmstat.c: skip NR_TLB_REMOTE_FLUSH* properly (git fixes). - module: exclude SHN_UNDEF symbols from kallsyms api (bnc#1012382). - move changes without Git-commit out of sorted section - net: cadence: Fix a sleep-in-atomic-context bug in macb_halt_tx() (bnc#1012382). - net: hns: fix length and page_offset overflow when CONFIG_ARM64_64K_PAGES (bnc#1012382). - net: ipv4: update fnhe_pmtu when first hop's MTU changes (bnc#1012382). - net/ipv6: Display all addresses in output of /proc/net/if_inet6 (bnc#1012382). - netlabel: check for IPV4MASK in addrinfo_get (bnc#1012382). - net: macb: disable scatter-gather for macb on sama5d3 (bnc#1012382). - net/mlx4: Use cpumask_available for eq->affinity_mask (bnc#1012382). - net: mvpp2: Extract the correct ethtype from the skb for tx csum offload (bnc#1012382). - net: systemport: Fix wake-up interrupt race during resume (bnc#1012382). - net/usb: cancel pending work when unbinding smsc75xx (bnc#1012382). - NFS: add nostatflush mount option (bsc#1065726). - NFS: Avoid quadratic search when freeing delegations (bsc#1084760). - nfsd: fix corrupted reply to badly ordered compound (bnc#1012382). - ocfs2: fix locking for res->tracking and dlm->tracking_list (bnc#1012382). - of: unittest: Disable interrupt node tests for old world MAC systems (bnc#1012382). - ovl: Copy inode attributes after setting xattr (bsc#1107299). - Pass x86 as architecture on x86_64 and i386 (bsc#1093118). - PCI: hv: Use effective affinity mask (bsc#1109772). - PCI: Reprogram bridge prefetch registers on resume (bnc#1012382). - perf probe powerpc: Ignore SyS symbols irrespective of endianness (bnc#1012382). - perf script python: Fix export-to-postgresql.py occasional failure (bnc#1012382). - PM / core: Clear the direct_complete flag on errors (bnc#1012382). - powerpc/kdump: Handle crashkernel memory reservation failure (bnc#1012382). - powerpc/numa: Skip onlining a offline node in kdump path (bsc#1109784). - powerpc/perf/hv-24x7: Fix passing of catalog version number (bsc#1053043). - powerpc/pseries: Fix build break for SPLPAR=n and CPU hotplug (bsc#1079524, git-fixes). - powerpc/pseries: Fix CONFIG_NUMA=n build (bsc#1067906, git-fixes). - powerpc/pseries/mm: call H_BLOCK_REMOVE (bsc#1109158). - powerpc/pseries/mm: factorize PTE slot computation (bsc#1109158). - powerpc/pseries/mm: Introducing FW_FEATURE_BLOCK_REMOVE (bsc#1109158). - powerpc/rtas: Fix a potential race between CPU-Offline & Migration (bsc#1111870). - power: vexpress: fix corruption in notifier registration (bnc#1012382). - proc: restrict kernel stack dumps to root (bnc#1012382). - qlcnic: fix Tx descriptor corruption on 82xx devices (bnc#1012382). - r8169: Clear RTL_FLAG_TASK_*_PENDING when clearing RTL_FLAG_TASK_ENABLED (bnc#1012382). - RAID10 BUG_ON in raise_barrier when force is true and conf->barrier is 0 (bnc#1012382). - rculist: add list_for_each_entry_from_rcu() (bsc#1084760). - rculist: Improve documentation for list_for_each_entry_from_rcu() (bsc#1084760). - RDMA/ucma: check fd type in ucma_migrate_id() (bnc#1012382). - README: Clean-up trailing whitespace - reiserfs: add check to detect corrupted directory entry (bsc#1109818). - reiserfs: do not panic on bad directory entries (bsc#1109818). - resource: Include resource end in walk_*() interfaces (bsc#1114648). - Revert "btrfs: qgroups: Retry after commit on getting EDQUOT" (bsc#1031392). - Revert "drm: Do not pass negative delta to ktime_sub_ns()" (bsc#1106929) - Revert "drm/i915: Initialize HWS page address after GPU reset" (bsc#1106929) - Revert "KVM: x86: remove eager_fpu field of struct kvm_vcpu_arch" (kabi). - Revert "media: v4l: event: Prevent freeing event subscriptions while accessed" (kabi). - Revert "proc: restrict kernel stack dumps to root" (kabi). - Revert "rpm/constraints.in: Lower default disk space requirement from 25G to 24G" This reverts commit 406abda1467c038842febffe264faae1fa2e3c1d. ok, did not wait long enough to see the failure. - Revert "Skip intel_crt_init for Dell XPS 8700" (bsc#1106929) - Revert "tcp: add tcp_ooo_try_coalesce() helper" (kabi). - Revert "tcp: call tcp_drop() from tcp_data_queue_ofo()" (kabi). - Revert "tcp: fix a stale ooo_last_skb after a replace" (kabi). - Revert "tcp: free batches of packets in tcp_prune_ofo_queue()" (kabi). - Revert "tcp: use an RB tree for ooo receive queue" (kabi). - Revert "usb: cdc-wdm: Fix a sleep-in-atomic-context bug in service_outstanding_interrupt()" (bnc#1012382). - Revert "x86/fpu: Finish excising 'eagerfpu'" (kabi). - Revert "x86/fpu: Remove struct fpu::counter" (kabi). - Revert "x86/fpu: Remove use_eager_fpu()" (kabi). - rndis_wlan: potential buffer overflow in rndis_wlan_auth_indication() (bnc#1012382). - rpm/apply-patches: Fix failure if there are no vanilla patches The grep command returns 1 if there are no patches and we are using pipefail. - rpm/constraints.in: build ARM on at least 2 cpus - rpm/constraints.in: Lower default disk space requirement from 25G to 24G 25G is rejected by the build service on ARM. - rtnl: limit IFLA_NUM_TX_QUEUES and IFLA_NUM_RX_QUEUES to 4096 (bnc#1012382). - s390/chsc: Add exception handler for CHSC instruction (git-fixes). - s390/extmem: fix gcc 8 stringop-overflow warning (bnc#1012382). - s390/kdump: Fix elfcorehdr size calculation (git-fixes). - s390/kdump: Make elfcorehdr size calculation ABI compliant (git-fixes). - s390/mm: correct allocate_pgste proc_handler callback (git-fixes). - s390/qeth: do not dump past end of unknown HW header (bnc#1012382). - s390/qeth: handle failure on workqueue creation (git-fixes). - s390: revert ELF_ET_DYN_BASE base changes (git-fixes). - s390/stacktrace: fix address ranges for asynchronous and panic stack (git-fixes). - scsi: bnx2i: add error handling for ioremap_nocache (bnc#1012382). - scsi: ibmvscsi: Improve strings handling (bnc#1012382). - scsi: klist: Make it safe to use klists in atomic context (bnc#1012382). - scsi: target/iscsi: Make iscsit_ta_authentication() respect the output buffer size (bnc#1012382). - selftests/efivarfs: add required kernel configs (bnc#1012382). - serial: cpm_uart: return immediately from console poll (bnc#1012382). - serial: imx: restore handshaking irq for imx1 (bnc#1012382). - signal: Properly deliver SIGSEGV from x86 uprobes (bsc#1110006). - slub: make ->cpu_partial unsigned int (bnc#1012382). - smb2: fix missing files in root share directory listing (bnc#1012382). - smb3: fill in statfs fsid and correct namelen (bsc#1112905). - sound: enable interrupt after dma buffer initialization (bnc#1012382). - spi: rspi: Fix interrupted DMA transfers (bnc#1012382). - spi: rspi: Fix invalid SPI use during system suspend (bnc#1012382). - spi: sh-msiof: Fix handling of write value for SISTR register (bnc#1012382). - spi: sh-msiof: Fix invalid SPI use during system suspend (bnc#1012382). - spi: tegra20-slink: explicitly enable/disable clock (bnc#1012382). - staging: android: ashmem: Fix mmap size validation (bnc#1012382). - staging: rts5208: fix missing error check on call to rtsx_write_register (bnc#1012382). - stmmac: fix valid numbers of unicast filter entries (bnc#1012382). - target: log Data-Out timeouts as errors (bsc#1095805). - target: log NOP ping timeouts as errors (bsc#1095805). - target: split out helper for cxn timeout error stashing (bsc#1095805). - target: stash sess_err_stats on Data-Out timeout (bsc#1095805). - target: use ISCSI_IQN_LEN in iscsi_target_stat (bsc#1095805). - tcp: add tcp_ooo_try_coalesce() helper (bnc#1012382). - tcp: call tcp_drop() from tcp_data_queue_ofo() (bnc#1012382). - tcp: fix a stale ooo_last_skb after a replace (bnc#1012382). - tcp: free batches of packets in tcp_prune_ofo_queue() (bnc#1012382). - tcp: increment sk_drops for dropped rx packets (bnc#1012382). - tcp: use an RB tree for ooo receive queue (bnc#1012382). - team: Forbid enslaving team device to itself (bnc#1012382). - thermal: of-thermal: disable passive polling when thermal zone is disabled (bnc#1012382). - tools/vm/page-types.c: fix "defined but not used" warning (bnc#1012382). - tools/vm/slabinfo.c: fix sign-compare warning (bnc#1012382). - tpm: Restore functionality to xen vtpm driver (bsc#1020645, git-fixes). - tsl2550: fix lux1_input error in low light (bnc#1012382). - ubifs: Check for name being NULL while mounting (bnc#1012382). - ucma: fix a use-after-free in ucma_resolve_ip() (bnc#1012382). - USB: fix error handling in usb_driver_claim_interface() (bnc#1012382). - usb: gadget: fotg210-udc: Fix memory leak of fotg210->ep[i] (bnc#1012382). - usb: gadget: serial: fix oops when data rx'd after close (bnc#1012382). - USB: handle NULL config in usb_find_alt_setting() (bnc#1012382). - USB: remove LPM management from usb_driver_claim_interface() (bnc#1012382). - USB: serial: kobil_sct: fix modem-status error handling (bnc#1012382). - USB: serial: simple: add Motorola Tetra MTP6550 id (bnc#1012382). - USB: usbdevfs: restore warning for nonsensical flags (bnc#1012382). - USB: usbdevfs: sanitize flags more (bnc#1012382). - usb: wusbcore: security: cast sizeof to int for comparison (bnc#1012382). - USB: yurex: Check for truncation in yurex_read() (bnc#1012382). - Use make --output-sync feature when available (bsc#1012422). The mesages in make output can interleave making it impossible to extract warnings reliably. Since version 4 GNU Make supports --output-sync flag that prints output of each sub-command atomically preventing this issue. Detect the flag and use it if available. SLE11 has make 3.81 so it is required to include make 4 in the kernel OBS projects to take advantege of this. - Use upstream version of pci-hyperv change 35a88a18d7 - uwb: hwa-rc: fix memory leak at probe (bnc#1012382). - vmci: type promotion bug in qp_host_get_user_memory() (bnc#1012382). - wlcore: Add missing PM call for wlcore_cmd_wait_for_event_or_timeout() (bnc#1012382). - wlcore: Fix memory leak in wlcore_cmd_wait_for_event_or_timeout (git-fixes). - x86/cpufeature: deduplicate X86_FEATURE_L1TF_PTEINV (kabi). - x86/entry/64: Add two more instruction suffixes (bnc#1012382). - x86/entry/64: Clear registers for exceptions/interrupts, to reduce speculation attack surface (bsc#1105931). - x86/entry/64: sanitize extra registers on syscall entry (bsc#1105931). - x86/fpu: Finish excising 'eagerfpu' (bnc#1012382). - x86/fpu: Remove second definition of fpu in __fpu__restore_sig() (bsc#1110006). - x86/fpu: Remove struct fpu::counter (bnc#1012382). - x86/fpu: Remove use_eager_fpu() (bnc#1012382). - x86/irq: implement irq_data_get_effective_affinity_mask() for v4.12 (bsc#1109772). - x86/kexec: Correct KEXEC_BACKUP_SRC_END off-by-one error (bsc#1114648). - x86/numa_emulation: Fix emulated-to-physical node mapping (bnc#1012382). - x86/paravirt: Fix some warning messages (bnc#1065600). - x86/percpu: Fix this_cpu_read() (bsc#1110006). - x86,sched: Allow topologies where NUMA nodes share an LLC (bsc#1091158, bsc#1101555). - x86/spec_ctrl: Fix spec_ctrl reporting (bsc#1106913, bsc#1111516). - x86/speculation: Apply IBPB more strictly to avoid cross-process data leak (bsc#1106913). - x86/speculation: Enable cross-hyperthread spectre v2 STIBP mitigation (bsc#1106913). - x86/speculation: Propagate information about RSB filling mitigation to sysfs (bsc#1106913). - x86/time: Correct the attribute on jiffies' definition (bsc#1110006). - x86/tsc: Add missing header to tsc_msr.c (bnc#1012382). - xen: avoid crash in disable_hotplug_cpu (bnc#1012382 bsc#1106594 bsc#1042422). - xen: fix GCC warning and remove duplicate EVTCHN_ROW/EVTCHN_COL usage (bnc#1012382). - xen/manage: do not complain about an empty value in control/sysrq node (bnc#1012382). - xhci: Add missing CAS workaround for Intel Sunrise Point xHCI (bnc#1012382). - xhci: Do not print a warning when setting link state for disabled ports (bnc#1012382). - rpm/kernel-binary.spec.in: Add missing export BRP_SIGN_FILES (bsc#1115587) The export line was accidentally dropped at merging scripts branch, which resulted in the invalid module signature. Special Instructions and Notes: Please reboot the system after installing this update. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 42.3: zypper in -t patch openSUSE-2018-1427=1 Package List: - openSUSE Leap 42.3 (noarch): kernel-devel-4.4.162-78.1 kernel-docs-4.4.162-78.1 kernel-docs-html-4.4.162-78.1 kernel-docs-pdf-4.4.162-78.1 kernel-macros-4.4.162-78.1 kernel-source-4.4.162-78.1 kernel-source-vanilla-4.4.162-78.1 - openSUSE Leap 42.3 (x86_64): kernel-debug-4.4.162-78.1 kernel-debug-base-4.4.162-78.1 kernel-debug-base-debuginfo-4.4.162-78.1 kernel-debug-debuginfo-4.4.162-78.1 kernel-debug-debugsource-4.4.162-78.1 kernel-debug-devel-4.4.162-78.1 kernel-debug-devel-debuginfo-4.4.162-78.1 kernel-default-4.4.162-78.1 kernel-default-base-4.4.162-78.1 kernel-default-base-debuginfo-4.4.162-78.1 kernel-default-debuginfo-4.4.162-78.1 kernel-default-debugsource-4.4.162-78.1 kernel-default-devel-4.4.162-78.1 kernel-obs-build-4.4.162-78.1 kernel-obs-build-debugsource-4.4.162-78.1 kernel-obs-qa-4.4.162-78.1 kernel-syms-4.4.162-78.1 kernel-vanilla-4.4.162-78.1 kernel-vanilla-base-4.4.162-78.1 kernel-vanilla-base-debuginfo-4.4.162-78.1 kernel-vanilla-debuginfo-4.4.162-78.1 kernel-vanilla-debugsource-4.4.162-78.1 kernel-vanilla-devel-4.4.162-78.1 References: https://www.suse.com/security/cve/CVE-2018-18281.html https://www.suse.com/security/cve/CVE-2018-18386.html https://www.suse.com/security/cve/CVE-2018-18690.html https://www.suse.com/security/cve/CVE-2018-18710.html https://www.suse.com/security/cve/CVE-2018-9516.html https://bugzilla.suse.com/1011920 https://bugzilla.suse.com/1012382 https://bugzilla.suse.com/1012422 https://bugzilla.suse.com/1020645 https://bugzilla.suse.com/1031392 https://bugzilla.suse.com/1035053 https://bugzilla.suse.com/1042422 https://bugzilla.suse.com/1043591 https://bugzilla.suse.com/1048129 https://bugzilla.suse.com/1050431 https://bugzilla.suse.com/1053043 https://bugzilla.suse.com/1054239 https://bugzilla.suse.com/1057199 https://bugzilla.suse.com/1062303 https://bugzilla.suse.com/1065600 https://bugzilla.suse.com/1065726 https://bugzilla.suse.com/1067906 https://bugzilla.suse.com/1073579 https://bugzilla.suse.com/1076393 https://bugzilla.suse.com/1078788 https://bugzilla.suse.com/1079524 https://bugzilla.suse.com/1083215 https://bugzilla.suse.com/1083527 https://bugzilla.suse.com/1084760 https://bugzilla.suse.com/1091158 https://bugzilla.suse.com/1093118 https://bugzilla.suse.com/1094825 https://bugzilla.suse.com/1095805 https://bugzilla.suse.com/1098050 https://bugzilla.suse.com/1098996 https://bugzilla.suse.com/1101555 https://bugzilla.suse.com/1104124 https://bugzilla.suse.com/1105025 https://bugzilla.suse.com/1105931 https://bugzilla.suse.com/1106110 https://bugzilla.suse.com/1106359 https://bugzilla.suse.com/1106594 https://bugzilla.suse.com/1106913 https://bugzilla.suse.com/1106929 https://bugzilla.suse.com/1107060 https://bugzilla.suse.com/1107299 https://bugzilla.suse.com/1107535 https://bugzilla.suse.com/1107870 https://bugzilla.suse.com/1108377 https://bugzilla.suse.com/1108498 https://bugzilla.suse.com/1109158 https://bugzilla.suse.com/1109772 https://bugzilla.suse.com/1109784 https://bugzilla.suse.com/1109818 https://bugzilla.suse.com/1109907 https://bugzilla.suse.com/1109919 https://bugzilla.suse.com/1109923 https://bugzilla.suse.com/1110006 https://bugzilla.suse.com/1111516 https://bugzilla.suse.com/1111870 https://bugzilla.suse.com/1112007 https://bugzilla.suse.com/1112262 https://bugzilla.suse.com/1112263 https://bugzilla.suse.com/1112894 https://bugzilla.suse.com/1112902 https://bugzilla.suse.com/1112903 https://bugzilla.suse.com/1112905 https://bugzilla.suse.com/1113667 https://bugzilla.suse.com/1113751 https://bugzilla.suse.com/1113769 https://bugzilla.suse.com/1114178 https://bugzilla.suse.com/1114229 https://bugzilla.suse.com/1114648 https://bugzilla.suse.com/1115587 https://bugzilla.suse.com/981083 https://bugzilla.suse.com/997172

1 0

openSUSE-SU-2018:3805-1: moderate: Security update for chromium
by opensuse-security＠opensuse.org 18 Nov '18

18 Nov '18

openSUSE Security Update: Security update for chromium ______________________________________________________________________________ Announcement ID: openSUSE-SU-2018:3805-1 Rating: moderate References: #1115537 Cross-References: CVE-2018-17478 Affected Products: openSUSE Leap 15.0 openSUSE Backports SLE-15 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: This update contains Chromium 70.0.3538.102 and fixes security issues and bugs. Vulnerabilities fixed: - CVE-2018-17478: Out of bounds memory access in V8 (boo#1115537) - Various fixes from internal audits, fuzzing and other initiatives Packaging changes: - noto-emoji-fonts is no longer a recommended dependency Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.0: zypper in -t patch openSUSE-2018-1425=1 - openSUSE Backports SLE-15: zypper in -t patch openSUSE-2018-1425=1 Package List: - openSUSE Leap 15.0 (x86_64): chromedriver-70.0.3538.102-lp150.2.23.2 chromedriver-debuginfo-70.0.3538.102-lp150.2.23.2 chromium-70.0.3538.102-lp150.2.23.2 chromium-debuginfo-70.0.3538.102-lp150.2.23.2 chromium-debugsource-70.0.3538.102-lp150.2.23.2 - openSUSE Backports SLE-15 (aarch64 x86_64): chromedriver-70.0.3538.102-bp150.2.17.1 chromedriver-debuginfo-70.0.3538.102-bp150.2.17.1 chromium-70.0.3538.102-bp150.2.17.1 chromium-debuginfo-70.0.3538.102-bp150.2.17.1 chromium-debugsource-70.0.3538.102-bp150.2.17.1 References: https://www.suse.com/security/cve/CVE-2018-17478.html https://bugzilla.suse.com/1115537

1 0

openSUSE-SU-2018:3804-1: moderate: Security update for amanda
by opensuse-security＠opensuse.org 16 Nov '18

16 Nov '18

openSUSE Security Update: Security update for amanda ______________________________________________________________________________ Announcement ID: openSUSE-SU-2018:3804-1 Rating: moderate References: #1112916 Cross-References: CVE-2016-10729 Affected Products: openSUSE Leap 42.3 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: This update for amanda fixes the following security issue: - CVE-2016-10729: Local privilege escalation from amanda user to root via unsafe tar command options (bsc#1112916) Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 42.3: zypper in -t patch openSUSE-2018-1421=1 Package List: - openSUSE Leap 42.3 (x86_64): amanda-3.3.6-10.3.1 amanda-debuginfo-3.3.6-10.3.1 amanda-debugsource-3.3.6-10.3.1 References: https://www.suse.com/security/cve/CVE-2016-10729.html https://bugzilla.suse.com/1112916

1 0

openSUSE-SU-2018:3803-1: important: Security update for systemd
by opensuse-security＠opensuse.org 16 Nov '18

16 Nov '18

openSUSE Security Update: Security update for systemd ______________________________________________________________________________ Announcement ID: openSUSE-SU-2018:3803-1 Rating: important References: #1106923 #1108835 #1109252 #1110445 #1111278 #1112024 #1113083 #1113632 #1113665 Cross-References: CVE-2018-15686 CVE-2018-15688 Affected Products: openSUSE Leap 42.3 ______________________________________________________________________________ An update that solves two vulnerabilities and has 7 fixes is now available. Description: This update for systemd fixes the following issues: Security issues fixed: - CVE-2018-15688: A buffer overflow vulnerability in the dhcp6 client of systemd allowed a malicious dhcp6 server to overwrite heap memory in systemd-networkd. (bsc#1113632) - CVE-2018-15686: A vulnerability in unit_deserialize of systemd allows an attacker to supply arbitrary state across systemd re-execution via NotifyAccess. This can be used to improperly influence systemd execution and possibly lead to root privilege escalation. (bsc#1113665) Non-security issues fixed: - dhcp6: split assert_return() to be more debuggable when hit - core: skip unit deserialization and move to the next one when unit_deserialize() fails - core: properly handle deserialization of unknown unit types (#6476) - core: don't create Requires for workdir if "missing ok" (bsc#1113083) - logind: use manager_get_user_by_pid() where appropriate - logind: rework manager_get_{user|session}_by_pid() a bit - login: fix user@.service case, so we don't allow nested sessions (#8051) (bsc#1112024) - core: be more defensive if we can't determine per-connection socket peer (#7329) - socket-util: introduce port argument in sockaddr_port() - service: fixup ExecStop for socket-activated shutdown (#4120) - service: Continue shutdown on socket activated unit on termination (#4108) (bsc#1106923) - cryptsetup: build fixes for "add support for sector-size= option" - udev-rules: IMPORT cmdline does not recognize keys with similar names (bsc#1111278) - core: keep the kernel coredump defaults when systemd-coredump is disabled - core: shorten main() a bit, split out coredump initialization - core: set RLIMIT_CORE to unlimited by default (bsc#1108835) - core/mount: fstype may be NULL - journald: don't ship systemd-journald-audit.socket (bsc#1109252) - core: make "tmpfs" dependencies on swapfs a "default" dep, not an "implicit" (bsc#1110445) - mount: make sure we unmount tmpfs mounts before we deactivate swaps (#7076) - tmp.mount.hm4: After swap.target (#3087) - Ship systemd-sysv-install helper via the main package This script was part of systemd-sysvinit sub-package but it was wrong since systemd-sysv-install is a script used to redirect enable/disable operations to chkconfig when the unit targets are sysv init scripts. Therefore it's never been a SySV init tool. This update was imported from the SUSE:SLE-12-SP2:Update update project. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 42.3: zypper in -t patch openSUSE-2018-1423=1 Package List: - openSUSE Leap 42.3 (i586 x86_64): libsystemd0-228-62.1 libsystemd0-debuginfo-228-62.1 libsystemd0-mini-228-62.1 libsystemd0-mini-debuginfo-228-62.1 libudev-devel-228-62.1 libudev-mini-devel-228-62.1 libudev-mini1-228-62.1 libudev-mini1-debuginfo-228-62.1 libudev1-228-62.1 libudev1-debuginfo-228-62.1 nss-myhostname-228-62.1 nss-myhostname-debuginfo-228-62.1 nss-mymachines-228-62.1 nss-mymachines-debuginfo-228-62.1 systemd-228-62.1 systemd-debuginfo-228-62.1 systemd-debugsource-228-62.1 systemd-devel-228-62.1 systemd-logger-228-62.1 systemd-mini-228-62.1 systemd-mini-debuginfo-228-62.1 systemd-mini-debugsource-228-62.1 systemd-mini-devel-228-62.1 systemd-mini-sysvinit-228-62.1 systemd-sysvinit-228-62.1 udev-228-62.1 udev-debuginfo-228-62.1 udev-mini-228-62.1 udev-mini-debuginfo-228-62.1 - openSUSE Leap 42.3 (x86_64): libsystemd0-32bit-228-62.1 libsystemd0-debuginfo-32bit-228-62.1 libudev1-32bit-228-62.1 libudev1-debuginfo-32bit-228-62.1 nss-myhostname-32bit-228-62.1 nss-myhostname-debuginfo-32bit-228-62.1 systemd-32bit-228-62.1 systemd-debuginfo-32bit-228-62.1 - openSUSE Leap 42.3 (noarch): systemd-bash-completion-228-62.1 systemd-mini-bash-completion-228-62.1 References: https://www.suse.com/security/cve/CVE-2018-15686.html https://www.suse.com/security/cve/CVE-2018-15688.html https://bugzilla.suse.com/1106923 https://bugzilla.suse.com/1108835 https://bugzilla.suse.com/1109252 https://bugzilla.suse.com/1110445 https://bugzilla.suse.com/1111278 https://bugzilla.suse.com/1112024 https://bugzilla.suse.com/1113083 https://bugzilla.suse.com/1113632 https://bugzilla.suse.com/1113665

1 0

openSUSE-SU-2018:3802-1: Security update for libxkbcommon
by opensuse-security＠opensuse.org 16 Nov '18

16 Nov '18

openSUSE Security Update: Security update for libxkbcommon ______________________________________________________________________________ Announcement ID: openSUSE-SU-2018:3802-1 Rating: low References: #1105832 Cross-References: CVE-2018-15853 CVE-2018-15854 CVE-2018-15855 CVE-2018-15856 CVE-2018-15857 CVE-2018-15858 CVE-2018-15859 CVE-2018-15861 CVE-2018-15862 CVE-2018-15863 CVE-2018-15864 Affected Products: openSUSE Leap 15.0 ______________________________________________________________________________ An update that fixes 11 vulnerabilities is now available. Description: This update for libxkbcommon to version 0.8.2 fixes the following issues: - Fix a few NULL-dereferences, out-of-bounds access and undefined behavior in the XKB text format parser. - CVE-2018-15853: Endless recursion could have been used by local attackers to crash xkbcommon users by supplying a crafted keymap file that triggers boolean negation (bsc#1105832). - CVE-2018-15854: Unchecked NULL pointer usage could have been used by local attackers to crash (NULL pointer dereference) the xkbcommon parser by supplying a crafted keymap file, because geometry tokens were desupported incorrectly (bsc#1105832). - CVE-2018-15855: Unchecked NULL pointer usage could have been used by local attackers to crash (NULL pointer dereference) the xkbcommon parser by supplying a crafted keymap file, because the XkbFile for an xkb_geometry section was mishandled (bsc#1105832). - CVE-2018-15856: An infinite loop when reaching EOL unexpectedly could be used by local attackers to cause a denial of service during parsing of crafted keymap files (bsc#1105832). - CVE-2018-15857: An invalid free in ExprAppendMultiKeysymList could have been used by local attackers to crash xkbcommon keymap parsers or possibly have unspecified other impact by supplying a crafted keymap file (bsc#1105832). - CVE-2018-15858: Unchecked NULL pointer usage when handling invalid aliases in CopyKeyAliasesToKeymap could have been used by local attackers to crash (NULL pointer dereference) the xkbcommon parser by supplying a crafted keymap file (bsc#1105832). - CVE-2018-15859: Unchecked NULL pointer usage when parsing invalid atoms in ExprResolveLhs could have been used by local attackers to crash (NULL pointer dereference) the xkbcommon parser by supplying a crafted keymap file, because lookup failures are mishandled (bsc#1105832). - CVE-2018-15861: Unchecked NULL pointer usage in ExprResolveLhs could have been used by local attackers to crash (NULL pointer dereference) the xkbcommon parser by supplying a crafted keymap file that triggers an xkb_intern_atom failure (bsc#1105832). - CVE-2018-15862: Unchecked NULL pointer usage in LookupModMask could have been used by local attackers to crash (NULL pointer dereference) the xkbcommon parser by supplying a crafted keymap file with invalid virtual modifiers (bsc#1105832). - CVE-2018-15863: Unchecked NULL pointer usage in ResolveStateAndPredicate could have been used by local attackers to crash (NULL pointer dereference) the xkbcommon parser by supplying a crafted keymap file with a no-op modmask expression (bsc#1105832). - CVE-2018-15864: Unchecked NULL pointer usage in resolve_keysym could have been used by local attackers to crash (NULL pointer dereference) the xkbcommon parser by supplying a crafted keymap file, because a map access attempt can occur for a map that was never created (bsc#1105832). This update was imported from the SUSE:SLE-15:Update update project. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.0: zypper in -t patch openSUSE-2018-1418=1 Package List: - openSUSE Leap 15.0 (i586 x86_64): libxkbcommon-debugsource-0.8.2-lp150.2.3.1 libxkbcommon-devel-0.8.2-lp150.2.3.1 libxkbcommon-x11-0-0.8.2-lp150.2.3.1 libxkbcommon-x11-0-debuginfo-0.8.2-lp150.2.3.1 libxkbcommon-x11-devel-0.8.2-lp150.2.3.1 libxkbcommon0-0.8.2-lp150.2.3.1 libxkbcommon0-debuginfo-0.8.2-lp150.2.3.1 - openSUSE Leap 15.0 (x86_64): libxkbcommon-devel-32bit-0.8.2-lp150.2.3.1 libxkbcommon-x11-0-32bit-0.8.2-lp150.2.3.1 libxkbcommon-x11-0-32bit-debuginfo-0.8.2-lp150.2.3.1 libxkbcommon-x11-devel-32bit-0.8.2-lp150.2.3.1 libxkbcommon0-32bit-0.8.2-lp150.2.3.1 libxkbcommon0-32bit-debuginfo-0.8.2-lp150.2.3.1 References: https://www.suse.com/security/cve/CVE-2018-15853.html https://www.suse.com/security/cve/CVE-2018-15854.html https://www.suse.com/security/cve/CVE-2018-15855.html https://www.suse.com/security/cve/CVE-2018-15856.html https://www.suse.com/security/cve/CVE-2018-15857.html https://www.suse.com/security/cve/CVE-2018-15858.html https://www.suse.com/security/cve/CVE-2018-15859.html https://www.suse.com/security/cve/CVE-2018-15861.html https://www.suse.com/security/cve/CVE-2018-15862.html https://www.suse.com/security/cve/CVE-2018-15863.html https://www.suse.com/security/cve/CVE-2018-15864.html https://bugzilla.suse.com/1105832

1 0

openSUSE-SU-2018:3801-1: moderate: Security update for openssh
by opensuse-security＠opensuse.org 16 Nov '18

16 Nov '18

openSUSE Security Update: Security update for openssh ______________________________________________________________________________ Announcement ID: openSUSE-SU-2018:3801-1 Rating: moderate References: #1081947 #1091396 #1105010 #1106163 #964336 Cross-References: CVE-2018-15473 CVE-2018-15919 Affected Products: openSUSE Leap 15.0 ______________________________________________________________________________ An update that solves two vulnerabilities and has three fixes is now available. Description: This update for openssh fixes the following issues: - CVE-2018-15919: Remotely observable behaviour in auth-gss2.c in OpenSSH could be used by remote attackers to detect existence of users on a target system when GSS2 is in use. OpenSSH developers do not want to treat such a username enumeration (or "oracle") as a vulnerability. (bsc#1106163) - CVE-2018-15473: OpenSSH was prone to a user existance oracle vulnerability due to not delaying bailout for an invalid authenticating user until after the packet containing the request has been fully parsed, related to auth2-gss.c, auth2-hostbased.c, and auth2-pubkey.c. (bsc#1105010) The following non-security issues were fixed: - Stop leaking File descriptors (bsc#964336) - sftp-client.c returns wrong error code upon failure (bsc#1091396) - added pam_keyinit to pam configuration file (bsc#1081947) This update was imported from the SUSE:SLE-15:Update update project. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.0: zypper in -t patch openSUSE-2018-1419=1 Package List: - openSUSE Leap 15.0 (i586 x86_64): openssh-7.6p1-lp150.8.3.1 openssh-cavs-7.6p1-lp150.8.3.1 openssh-cavs-debuginfo-7.6p1-lp150.8.3.1 openssh-debuginfo-7.6p1-lp150.8.3.1 openssh-debugsource-7.6p1-lp150.8.3.1 openssh-fips-7.6p1-lp150.8.3.1 openssh-helpers-7.6p1-lp150.8.3.1 openssh-helpers-debuginfo-7.6p1-lp150.8.3.1 - openSUSE Leap 15.0 (x86_64): openssh-askpass-gnome-7.6p1-lp150.8.3.1 openssh-askpass-gnome-debuginfo-7.6p1-lp150.8.3.1 References: https://www.suse.com/security/cve/CVE-2018-15473.html https://www.suse.com/security/cve/CVE-2018-15919.html https://bugzilla.suse.com/1081947 https://bugzilla.suse.com/1091396 https://bugzilla.suse.com/1105010 https://bugzilla.suse.com/1106163 https://bugzilla.suse.com/964336

1 0