October 2018 - openSUSE Updates - openSUSE Mailing Lists

openSUSE-RU-2018:3179-1: moderate: Recommended update for slurm
by maintenance＠opensuse.org 17 Oct '18

17 Oct '18

openSUSE Recommended Update: Recommended update for slurm ______________________________________________________________________________ Announcement ID: openSUSE-RU-2018:3179-1 Rating: moderate References: #1108671 #1109373 Affected Products: openSUSE Leap 15.0 ______________________________________________________________________________ An update that has two recommended fixes can now be installed. Description: This update for slurm fixes the following issues: - Added correct link flags for perl bindings. (bsc#1108671) - Fix Requires(pre) and Requires(post) for slurm-config and slurm-node. This fixes issues with failing slurm user creation when installed during initial system installation (bsc#1109373). This update was imported from the SUSE:SLE-15:Update update project. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.0: zypper in -t patch openSUSE-2018-1168=1 Package List: - openSUSE Leap 15.0 (x86_64): libpmi0-17.11.9-lp150.5.15.1 libpmi0-debuginfo-17.11.9-lp150.5.15.1 libslurm32-17.11.9-lp150.5.15.1 libslurm32-debuginfo-17.11.9-lp150.5.15.1 perl-slurm-17.11.9-lp150.5.15.1 perl-slurm-debuginfo-17.11.9-lp150.5.15.1 slurm-17.11.9-lp150.5.15.1 slurm-auth-none-17.11.9-lp150.5.15.1 slurm-auth-none-debuginfo-17.11.9-lp150.5.15.1 slurm-config-17.11.9-lp150.5.15.1 slurm-debuginfo-17.11.9-lp150.5.15.1 slurm-debugsource-17.11.9-lp150.5.15.1 slurm-devel-17.11.9-lp150.5.15.1 slurm-doc-17.11.9-lp150.5.15.1 slurm-lua-17.11.9-lp150.5.15.1 slurm-lua-debuginfo-17.11.9-lp150.5.15.1 slurm-munge-17.11.9-lp150.5.15.1 slurm-munge-debuginfo-17.11.9-lp150.5.15.1 slurm-node-17.11.9-lp150.5.15.1 slurm-node-debuginfo-17.11.9-lp150.5.15.1 slurm-openlava-17.11.9-lp150.5.15.1 slurm-pam_slurm-17.11.9-lp150.5.15.1 slurm-pam_slurm-debuginfo-17.11.9-lp150.5.15.1 slurm-plugins-17.11.9-lp150.5.15.1 slurm-plugins-debuginfo-17.11.9-lp150.5.15.1 slurm-seff-17.11.9-lp150.5.15.1 slurm-sjstat-17.11.9-lp150.5.15.1 slurm-slurmdbd-17.11.9-lp150.5.15.1 slurm-slurmdbd-debuginfo-17.11.9-lp150.5.15.1 slurm-sql-17.11.9-lp150.5.15.1 slurm-sql-debuginfo-17.11.9-lp150.5.15.1 slurm-sview-17.11.9-lp150.5.15.1 slurm-sview-debuginfo-17.11.9-lp150.5.15.1 slurm-torque-17.11.9-lp150.5.15.1 slurm-torque-debuginfo-17.11.9-lp150.5.15.1 References: https://bugzilla.suse.com/1108671 https://bugzilla.suse.com/1109373

1 0

openSUSE-SU-2018:3178-1: important: Security update for git
by opensuse-security＠opensuse.org 17 Oct '18

17 Oct '18

openSUSE Security Update: Security update for git ______________________________________________________________________________ Announcement ID: openSUSE-SU-2018:3178-1 Rating: important References: #1110949 Cross-References: CVE-2018-17456 Affected Products: openSUSE Leap 15.0 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: This update for git fixes the following issues: - CVE-2018-17456: Git allowed remote code execution during processing of a recursive "git clone" of a superproject if a .gitmodules file has a URL field beginning with a '-' character. (boo#1110949). This update was imported from the SUSE:SLE-15:Update update project. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.0: zypper in -t patch openSUSE-2018-1177=1 Package List: - openSUSE Leap 15.0 (i586 x86_64): git-2.16.4-lp150.2.6.1 git-arch-2.16.4-lp150.2.6.1 git-core-2.16.4-lp150.2.6.1 git-core-debuginfo-2.16.4-lp150.2.6.1 git-credential-gnome-keyring-2.16.4-lp150.2.6.1 git-credential-gnome-keyring-debuginfo-2.16.4-lp150.2.6.1 git-credential-libsecret-2.16.4-lp150.2.6.1 git-credential-libsecret-debuginfo-2.16.4-lp150.2.6.1 git-cvs-2.16.4-lp150.2.6.1 git-daemon-2.16.4-lp150.2.6.1 git-daemon-debuginfo-2.16.4-lp150.2.6.1 git-debuginfo-2.16.4-lp150.2.6.1 git-debugsource-2.16.4-lp150.2.6.1 git-email-2.16.4-lp150.2.6.1 git-gui-2.16.4-lp150.2.6.1 git-p4-2.16.4-lp150.2.6.1 git-svn-2.16.4-lp150.2.6.1 git-svn-debuginfo-2.16.4-lp150.2.6.1 git-web-2.16.4-lp150.2.6.1 gitk-2.16.4-lp150.2.6.1 - openSUSE Leap 15.0 (noarch): git-doc-2.16.4-lp150.2.6.1 References: https://www.suse.com/security/cve/CVE-2018-17456.html https://bugzilla.suse.com/1110949

1 0

openSUSE-RU-2018:3177-1: Recommended update for nfs-utils
by maintenance＠opensuse.org 17 Oct '18

17 Oct '18

openSUSE Recommended Update: Recommended update for nfs-utils ______________________________________________________________________________ Announcement ID: openSUSE-RU-2018:3177-1 Rating: low References: #1098532 Affected Products: openSUSE Leap 15.0 ______________________________________________________________________________ An update that has one recommended fix can now be installed. Description: This update for nfs-utils provides the following fix: - The NFSV4LEASETIME setting in /etc/sysconfig/nfs was not correctly transferred to the lease-time option in /etc/nfs.conf (bsc#1098532) This update was imported from the SUSE:SLE-15:Update update project. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.0: zypper in -t patch openSUSE-2018-1164=1 Package List: - openSUSE Leap 15.0 (i586 x86_64): nfs-client-2.1.1-lp150.4.3.1 nfs-client-debuginfo-2.1.1-lp150.4.3.1 nfs-doc-2.1.1-lp150.4.3.1 nfs-kernel-server-2.1.1-lp150.4.3.1 nfs-kernel-server-debuginfo-2.1.1-lp150.4.3.1 nfs-utils-debuginfo-2.1.1-lp150.4.3.1 nfs-utils-debugsource-2.1.1-lp150.4.3.1 References: https://bugzilla.suse.com/1098532

1 0

openSUSE-RU-2018:3176-1: Recommended update for mariadb
by maintenance＠opensuse.org 17 Oct '18

17 Oct '18

openSUSE Recommended Update: Recommended update for mariadb ______________________________________________________________________________ Announcement ID: openSUSE-RU-2018:3176-1 Rating: low References: #1098683 Affected Products: openSUSE Leap 15.0 ______________________________________________________________________________ An update that has one recommended fix can now be installed. Description: This update for mariadb fixes a dependency issue: - libxml2-devel dependency issues with libreadline-devel - build with libedit on openSUSE (bsc#1098683) This update was imported from the SUSE:SLE-15:Update update project. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.0: zypper in -t patch openSUSE-2018-1179=1 Package List: - openSUSE Leap 15.0 (i586 x86_64): libmysqld-devel-10.2.15-lp150.2.6.1 libmysqld19-10.2.15-lp150.2.6.1 libmysqld19-debuginfo-10.2.15-lp150.2.6.1 mariadb-10.2.15-lp150.2.6.1 mariadb-bench-10.2.15-lp150.2.6.1 mariadb-bench-debuginfo-10.2.15-lp150.2.6.1 mariadb-client-10.2.15-lp150.2.6.1 mariadb-client-debuginfo-10.2.15-lp150.2.6.1 mariadb-debuginfo-10.2.15-lp150.2.6.1 mariadb-debugsource-10.2.15-lp150.2.6.1 mariadb-galera-10.2.15-lp150.2.6.1 mariadb-test-10.2.15-lp150.2.6.1 mariadb-test-debuginfo-10.2.15-lp150.2.6.1 mariadb-tools-10.2.15-lp150.2.6.1 mariadb-tools-debuginfo-10.2.15-lp150.2.6.1 - openSUSE Leap 15.0 (noarch): mariadb-errormessages-10.2.15-lp150.2.6.1 References: https://bugzilla.suse.com/1098683

1 0

openSUSE-RU-2018:3175-1: moderate: Recommended update for dnsmasq
by maintenance＠opensuse.org 17 Oct '18

17 Oct '18

openSUSE Recommended Update: Recommended update for dnsmasq ______________________________________________________________________________ Announcement ID: openSUSE-RU-2018:3175-1 Rating: moderate References: #1082318 #1106446 Affected Products: openSUSE Leap 15.0 ______________________________________________________________________________ An update that has two recommended fixes can now be installed. Description: This update for dnsmasq fixes the following issues: - The group 'nogroup' may not have been created when dnsmasq was installed (bsc#1106446) The following tracked packaging changes are included: - Mark license using the %license rpm pacro (bsc#1082318) This update was imported from the SUSE:SLE-15:Update update project. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.0: zypper in -t patch openSUSE-2018-1172=1 Package List: - openSUSE Leap 15.0 (i586 x86_64): dnsmasq-2.78-lp150.2.3.1 dnsmasq-debuginfo-2.78-lp150.2.3.1 dnsmasq-debugsource-2.78-lp150.2.3.1 dnsmasq-utils-2.78-lp150.2.3.1 dnsmasq-utils-debuginfo-2.78-lp150.2.3.1 References: https://bugzilla.suse.com/1082318 https://bugzilla.suse.com/1106446

1 0

openSUSE-RU-2018:3174-1: moderate: Recommended update for dialog
by maintenance＠opensuse.org 17 Oct '18

17 Oct '18

openSUSE Recommended Update: Recommended update for dialog ______________________________________________________________________________ Announcement ID: openSUSE-RU-2018:3174-1 Rating: moderate References: #1094836 Affected Products: openSUSE Leap 15.0 ______________________________________________________________________________ An update that has one recommended fix can now be installed. Description: This update for dialog fixes the following issues: - Fixes a bug where scrolling is not possible (bsc#1094836) This update was imported from the SUSE:SLE-15:Update update project. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.0: zypper in -t patch openSUSE-2018-1165=1 Package List: - openSUSE Leap 15.0 (i586 x86_64): dialog-1.3-lp150.2.3.1 dialog-debuginfo-1.3-lp150.2.3.1 dialog-debugsource-1.3-lp150.2.3.1 dialog-devel-1.3-lp150.2.3.1 libdialog14-1.3-lp150.2.3.1 libdialog14-debuginfo-1.3-lp150.2.3.1 - openSUSE Leap 15.0 (noarch): dialog-examples-1.3-lp150.2.3.1 dialog-lang-1.3-lp150.2.3.1 References: https://bugzilla.suse.com/1094836

1 0

openSUSE-RU-2018:3152-1: important: Recommended update for the Linux Kernel
by maintenance＠opensuse.org 15 Oct '18

15 Oct '18

openSUSE Recommended Update: Recommended update for the Linux Kernel ______________________________________________________________________________ Announcement ID: openSUSE-RU-2018:3152-1 Rating: important References: #1046540 #1050319 #1050536 #1050540 #1051510 #1067126 #1086283 #1086288 #1099125 #1100132 #1102881 #1103308 #1106105 #1106110 #1106237 #1106240 #1106838 #1107685 #1108241 #1108468 #1108828 #1108841 #1108870 #1109151 #1109158 #1109217 #1109784 #1110006 #1110096 #1110538 #1110561 #1110921 #1111028 #1111076 Affected Products: openSUSE Leap 15.0 ______________________________________________________________________________ An update that has 34 recommended fixes can now be installed. Description: The openSUSE Leap 15.0 kernel was updated to receive various bugfixes. It also fixes a boot issue with the previous update kernel. The following non-security bugs were fixed: - acpica: Reference Counts: increase max to 0x4000 for large servers (bsc#1108241). - acpi, nfit: Add function to look up nvdimm device and provide SMBIOS handle (bsc#1099125). - Add a cherry-picked id for apparmor fix - Add cherry-pick ID and sort the upstreamed drm/i915 patches - ALSA: hda/realtek - Cannot adjust speaker's volume on Dell XPS 27 7760 (bsc#1051510). - apparmor: Fix failure to audit context info in build_change_hat (bsc#1051510). - apparmor: fix mediation of prlimit (bsc#1051510). - apparmor: fix memory leak when deduping profile load (bsc#1051510). - apparmor: fix ptrace read check (bsc#1051510). - apparmor: Fully initialize aa_perms struct when answering userspace query (bsc#1051510). - ARM: 8799/1: mm: fix pci_ioremap_io() offset check (bsc#1051510). - ARM: bcm2835: Add GET_THROTTLED firmware property (bsc#1108468). - ARM: exynos: Clear global variable on init error path (bsc#1051510). - ARM: hisi: check of_iomap and fix missing of_node_put (bsc#1051510). - ARM: hwmod: RTC: Do not assume lock/unlock will be called with irq enabled (bsc#1051510). - ARM: mvebu: declare asm symbols as character arrays in pmsu.c (bsc#1051510). - asix: Check for supported Wake-on-LAN modes (bsc#1051510). - ath10k: protect ath10k_htt_rx_ring_free with rx_ring.lock (bsc#1051510). - audit: fix use-after-free in audit_add_watch (bsc#1051510). - Backport stable-patches for x86 architecture - batman-adv: Fix multicast TT issues with bogus ROAM flags (bsc#1051510). - batman-adv: Fix segfault when writing to sysfs elp_interval (bsc#1051510). - batman-adv: Fix segfault when writing to throughput_override (bsc#1051510). - batman-adv: Prevent duplicated gateway_node entry (bsc#1051510). - batman-adv: Prevent duplicated global TT entry (bsc#1051510). - batman-adv: Prevent duplicated nc_node entry (bsc#1051510). - batman-adv: Prevent duplicated softif_vlan entry (bsc#1051510). - batman-adv: Prevent duplicated tvlv handler (bsc#1051510). - be2net: Fix memory leak in be_cmd_get_profile_config() (bsc#1086288). - be2net: remove unused old AIC info (bsc#1086288). - be2net: remove unused old custom busy-poll fields (bsc#1086288 ). - bnx2x: Fix invalid memory access in rss hash config path (bsc#1050319). - bnx2x: Fix receiving tx-timeout in error or recovery state (bsc#1050319). - bpf: make cavium thunder compatible w/ bpf_xdp_adjust_tail (bsc#1110096). - cfg80211: fix a type issue in ieee80211_chandef_to_operating_class() (bsc#1051510). - cifs: integer overflow in in SMB2_ioctl() (bsc#1051510). - clk: clk-fixed-factor: Clear OF_POPULATED flag in case of failure (bsc#1051510). - clk: rockchip: Add pclk_rkpwm_pmu to PMU critical clocks in rk3399 (bsc#1051510). - clk: tegra: bpmp: Do not crash when a clock fails to register (bsc#1051510). - Correct the patch-tag in apparmor patch A wrong commit ID was put in Git-commit tag. After the correction, patches are re-sorted again. - cpufreq, intel_pstate: Allow unspecified FADT profile to probe PPC (bnc#1108841). - cpu/hotplug: Fix SMT supported evaluation (bsc#1110006). - crypto: caam/jr - fix ablkcipher_edesc pointer arithmetic (bsc#1051510). - crypto: cavium/nitrox - fix for command corruption in queue full case with backlog submissions (bsc#1051510). - crypto: ccp - add timeout support in the SEV command (bsc#1106838). - crypto: mxs-dcp - Fix wait logic on chan threads (bsc#1051510). - crypto: qat - Fix KASAN stack-out-of-bounds bug in adf_probe() (bsc#1051510). - cxgb4: fix abort_req_rss6 struct (bsc#1046540). - cxgb4: when disabling dcb set txq dcb priority to 0 (bsc#1046540 ). - declance: Fix continuation with the adapter identification message (bsc#1051510). - Delete patches.drivers/IB-qedr-Remove-GID-add-del-dummy-routines.patch. (bsc#1110921) - Disable DRM patches that broke vbox video driver KMP (bsc#1111076) - dmaengine: pl330: fix irq race with terminate_all (bsc#1051510). - drivers/base: stop new probing during shutdown (bsc#1051510). - drivers/tty: add error handling for pcmcia_loop_config (bsc#1051510). - drm/amdgpu: add another ATPX quirk for TOPAZ (bsc#1051510). - drm/amdgpu: add new polaris pci id (bsc#1051510). - drm/amdgpu: Enable/disable gfx PG feature in rlc safe mode (bsc#1051510). - drm/amdgpu: fix error handling in amdgpu_cs_user_fence_chunk (bsc#1106110) - drm/amdgpu: Pulling old prepare and submit for flip back (bsc#1051510). - drm/amdgpu: revert "fix deadlock of reservation between cs and gpu reset v2" (bsc#1051510). - drm/amdgpu: Update power state at the end of smu hw_init (bsc#1051510). - drm/amdkfd: Fix error codes in kfd_get_process (bsc#1051510). - drm/i915: Handle incomplete Z_FINISH for compressed error states (bsc#1100132) - drm/nouveau/debugfs: Wake up GPU before doing any reclocking (bsc#1051510). - drm/nouveau/disp: fix DP disable race (bsc#1051510). - drm/nouveau/drm/nouveau: Do not forget to cancel hpd_work on suspend/unload (bsc#1051510). - drm/nouveau/drm/nouveau: Prevent handling ACPI HPD events too early (bsc#1051510). - drm/nouveau/drm/nouveau: Use pm_runtime_get_noresume() in connector_detect() (bsc#1051510). - drm/nouveau: Fix deadlocks in nouveau_connector_detect() (bsc#1051510). - drm/nouveau: Fix runtime PM leak in drm_open() (bsc#1051510). - drm/nouveau/TBDdevinit: do not fail when PMU/PRE_OS is missing from VBIOS (bsc#1051510). - drm/nouveau: tegra: Detach from ARM DMA/IOMMU mapping (bsc#1051510). - drm/sun4i: Fix releasing node when enumerating enpoints (bsc#1051510). - drm: udl: Destroy framebuffer only if it was initialized (bsc#1051510). - edac: Add new memory type for non-volatile DIMMs (bsc#1099125). - edac, ghes: Add DDR4 and NVDIMM memory types (bsc#1099125). - edac, skx_edac: Detect non-volatile DIMMs (bsc#1099125). - edac, skx: Fix skx_edac build error when ACPI_NFIT=m (bsc#1099125). - efi: Avoid potential crashes, fix the 'struct efi_pci_io_protocol_32' definition for mixed mode (bsc#1110006). - ethtool: Remove trailing semicolon for static inline (bsc#1051510). - evm: Do not deadlock if a crypto algorithm is unavailable (bsc#1051510). - firmware, DMI: Add function to look up a handle and return DIMM size (bsc#1099125). - firmware: raspberrypi: Register hwmon driver (bsc#1108468). - floppy: Do not copy a kernel pointer to user memory in FDGETPRM ioctl (bsc#1051510). - fuse: Do not access pipe->buffers without pipe_lock() (bsc#1051510). - gpio: adp5588: Fix sleep-in-atomic-context bug (bsc#1051510). - gpio: Fix crash due to registration race (bsc#1051510). - gpiolib-acpi: Register GpioInt ACPI event handlers from a late_initcall (bsc#1051510). - gpiolib: Free the last requested descriptor (bsc#1051510). - gpio: mb86s70: Revert "Return error if requesting an already assigned gpio" (bsc#1051510). - hid: add support for Apple Magic Keyboards (bsc#1051510). - hid: hid-saitek: Add device ID for RAT 7 Contagion (bsc#1051510). - hwmon: Add support for RPi voltage sensor (bsc#1108468). - hwmon: (adt7475) Make adt7475_read_word() return errors (bsc#1051510). - hwmon: (ina2xx) fix sysfs shunt resistor read access (bsc#1051510). - hwmon: (nct6775) Set weight source to zero correctly (bsc#1051510). - hwmon: rpi: add module alias to raspberrypi-hwmon (bsc#1108468). - iommu/amd: Clear memory encryption mask from physical address (bsc#1106105). - ipmi:ssif: Add support for multi-part transmit messages > 2 parts (bsc#1103308). - ipv4: fix use-after-free in ip_cmsg_recv_dstaddr() (git-fixes). - irq/core: Fix boot crash when the irqaffinity= boot parameter is passed on CPUMASK_OFFSTACK=y kernels(v1) (bsc#1051510). - kabi protect enum mem_type (bsc#1099125). - kprobes/x86: Disable preemption in ftrace-based jprobes (bsc#1110006). - kprobes/x86: Prohibit probing on exception masking instructions (bsc#1110006). - kvmclock: fix TSC calibration for nested guests (bsc#1110006). - kvm: lapic: stop advertising DIRECTED_EOI when in-kernel IOAPIC is in use (bsc#1110006). - kvm, mm: account shadow page tables to kmemcg (bsc#1110006). - kvm: nvmx: Do not expose MPX VMX controls when guest MPX disabled (bsc#1106240). - kvm: nvmx: Do not halt vcpu when L1 is injecting events to L2 (bsc#1110006). - kvm/vmx: Optimize vmx_vcpu_run() and svm_vcpu_run() by marking the RDMSR path as unlikely() (bsc#1110006). - kvm: vmx: raise internal error for exception during invalid protected mode state (bsc#1110006). - kvm: vmx: track host_state.loaded using a loaded_vmcs pointer (bsc#1110006). - kvm: vmx: use local variable for current_vmptr when emulating VMPTRST (bsc#1110006). - kvm: x86: Do not use kvm_x86_ops->mpx_supported() directly (bsc#1106240). - kvm: x86: fix escape of guest dr6 to the host (bsc#1110006). - kvm: X86: fix incorrect reference of trace_kvm_pi_irte_update (bsc#1110006). - kvm: x86: fix KVM_XEN_HVM_CONFIG ioctl (bsc#1110006). - kvm: X86: Fix reserved bits check for MOV to CR3 (bsc#1110006). - kvm: x86: fix #UD address of failed Hyper-V hypercalls (bsc#1110006). - kvm: x86: remove APIC Timer periodic/oneshot spikes (bsc#1110006). - kvm: x86: Update cpuid properly when CR4.OSXAVE or CR4.PKE is changed (bsc#1110006). - lib/bug.c: exclude non-BUG/WARN exceptions from report_bug() (bsc#1110006). - liquidio: fix hang when re-binding VF host drv after running DPDK VF driver (bsc#1067126). - liquidio: fix kernel panic in VF driver (bsc#1067126). - mac80211: correct use of IEEE80211_VHT_CAP_RXSTBC_X (bsc#1051510). - mac80211: do not convert to A-MSDU if frag/subframe limited (bsc#1051510). - mac80211: do not Tx a deauth frame if the AP forbade Tx (bsc#1051510). - mac80211: fix a race between restart and CSA flows (bsc#1051510). - mac80211: fix setting IEEE80211_KEY_FLAG_RX_MGMT for AP mode keys (bsc#1051510). - mac80211: Fix station bandwidth setting after channel switch (bsc#1051510). - mac80211_hwsim: correct use of IEEE80211_VHT_CAP_RXSTBC_X (bsc#1051510). - mac80211_hwsim: require at least one channel (bsc#1051510). - mac80211: mesh: fix HWMP sequence numbering to follow standard (bsc#1051510). - mac80211: Run TXQ teardown code before de-registering interfaces (bsc#1051510). - mac80211: shorten the IBSS debug messages (bsc#1051510). - media: davinci: vpif_display: Mix memory leak on probe error path (bsc#1051510). - media: fsl-viu: fix error handling in viu_of_probe() (bsc#1051510). - media: helene: fix xtal frequency setting at power on (bsc#1051510). - media: s3c-camif: ignore -ENOIOCTLCMD from v4l2_subdev_call for s_power (bsc#1051510). - media: s5p-mfc: Fix buffer look up in s5p_mfc_handle_frame_{new, copy_time} functions (bsc#1051510). - media: soc_camera: ov772x: correct setting of banding filter (bsc#1051510). - media: tm6000: add error handling for dvb_register_adapter (bsc#1051510). - media: videobuf2-core: check for q->error in vb2_core_qbuf() (bsc#1051510). - media: videobuf-dma-sg: Fix dma_{sync,unmap}_sg() calls (bsc#1051510). - mm: Preserve _PAGE_DEVMAP across mprotect() calls (bsc#1111028). - mwifiex: handle race during mwifiex_usb_disconnect (bsc#1051510). - net: add support for Cavium PTP coprocessor (bsc#1110096). - net: cavium: fix NULL pointer dereference in cavium_ptp_put (bsc#1110096). - net: cavium: use module_pci_driver to simplify the code (bsc#1110096). - net: thunder: change q_len's type to handle max ring size (bsc#1110096). - net: thunderx: add MAC address filter tracking for LMAC (bsc#1110096). - net: thunderx: add multicast filter management support (bsc#1110096). - net: thunderx: add ndo_set_rx_mode callback implementation for VF (bsc#1110096). - net: thunderx: add new messages for handle ndo_set_rx_mode callback (bsc#1110096). - net: thunderx: add timestamping support (bsc#1110096). - net: thunderx: add workqueue control structures for handle ndo_set_rx_mode request (bsc#1110096). - net: thunderx: add XCAST messages handlers for PF (bsc#1110096). - net: thunderx: check for failed allocation lmac->dmacs (bsc#1110096). - net: thunderx: fix double free error (bsc#1110096). - net: thunderx: move filter register related macro into proper place (bsc#1110096). - net: thunderx: prevent concurrent data re-writing by nicvf_set_rx_mode (bsc#1110096). - net: thunderx: remove a couple of redundant assignments (bsc#1110096). - net: thunderx: rework mac addresses list to u64 array (bsc#1110096). - net: thunderx: Set max queue count taking XDP_TX into account (bsc#1110096). - nfc: trf7970a: fix check of clock frequencies, use && instead of || (bsc#1051510). - nvme: call nvme_complete_rq when nvmf_check_ready fails for mpath I/O (bsc#1107685). - objtool, kprobes/x86: Sync the latest <asm/insn.h> header with tools/objtool/arch/x86/include/asm/insn.h (bsc#1110006). - pci: dwc: Fix scheduling while atomic issues (git-fixes). - perf/x86/amd/ibs: Do not access non-started event (bsc#1110006). - perf/x86/cstate: Fix possible Spectre-v1 indexing for pkg_msr (bsc#1110006). - perf/x86: Fix possible Spectre-v1 indexing for hw_perf_event cache_* (bsc#1110006). - perf/x86: Fix possible Spectre-v1 indexing for x86_pmu::event_map() (bsc#1110006). - perf/x86/intel: Do not accidentally clear high bits in bdw_limit_period() (bsc#1110006). - perf/x86/intel: Fix event update for auto-reload (bsc#1110006). - perf/x86/intel: Fix large period handling on Broadwell CPUs (bsc#1110006). - perf/x86/intel: Fix linear IP of PEBS real_ip on Haswell and later CPUs (bsc#1110006). - perf/x86/intel/lbr: Fix incomplete LBR call stack (bsc#1110006). - perf/x86/intel: Properly save/restore the PMU state in the NMI handler (bsc#1110006). - perf/x86/intel/uncore: Correct fixed counter index check for NHM (bsc#1110006). - perf/x86/intel/uncore: Correct fixed counter index check in generic code (bsc#1110006). - perf/x86/intel/uncore: Fix Skylake UPI event format (bsc#1110006). - perf/x86/msr: Fix possible Spectre-v1 indexing in the MSR driver (bsc#1110006). - pm / core: Clear the direct_complete flag on errors (bsc#1051510). - pm: cpuidle: Fix cpuidle_poll_state_init() prototype (bsc#1110006). - pm / Domains: Fix genpd to deal with drivers returning 1 from ->prepare() (bsc#1051510). - powerpc/firmware: Add definitions for new drc-info firmware feature (bsc#1109158). - powerpc/numa: Skip onlining a offline node in kdump path (bsc#1109784). - powerpc/pseries: Fix duplicate firmware feature for DRC_INFO (bsc#1109158). - powerpc/pseries/mm: call H_BLOCK_REMOVE (bsc#1109158). - powerpc/pseries/mm: factorize PTE slot computation (bsc#1109158). - powerpc/pseries/mm: Introducing FW_FEATURE_BLOCK_REMOVE (bsc#1109158). - ptrace,x86: Make user_64bit_mode() available to 32-bit builds (bsc#1110006). - qed: Add missing device config for RoCE EDPM in UFP mode (bsc#1109217). - qed: Avoid sending mailbox commands when MFW is not responsive (bsc#1050536). - qed: Do not add VLAN 0 tag to untagged frames in multi-function mode (bsc#1050536). - qed: Fix populating the invalid stag value in multi function mode (bsc#1050536). - qed: Fix shmem structure inconsistency between driver and the mfw (bsc#1110561). - qed: Prevent a possible deadlock during driver load and unload (bsc#1050536). - qed: Wait for MCP halt and resume commands to take place (bsc#1050536). - qed: Wait for ready indication before rereading the shmem (bsc#1050536). - qlcnic: fix Tx descriptor corruption on 82xx devices (bsc#1050540). - qmi_wwan: set DTR for modems in forced USB2 mode (bsc#1051510). - RDMA/bnxt_re: Fix system crash during RDMA resource initialization (bsc#1086283). - Revert "cdc-acm: implement put_char() and flush_chars()" (bsc#1051510). - Revert "drm/amdgpu: Add an ATPX quirk for hybrid laptop" (bsc#1051510). - Revert "drm/i915/gvt: set max priority for gvt context" (bsc#1051510). - Revert "gpio: set up initial state from .get_direction()" (bsc#1051510). - Revert "iommu/io-pgtable: Avoid redundant TLB syncs" (bsc#1106237). - Revert "mwifiex: fix incorrect ht capability problem" (bsc#1051510). - Revert "mwifiex: handle race during mwifiex_usb_disconnect" (bsc#1051510). - Revert "pinctrl: sunxi: Do not enforce bias disable (for now)" (bsc#1051510). - Revert "slab: __GFP_ZERO is incompatible with a constructor" (bnc#1108828) This reverts commit de0a67303736262e306a3eb23aa38824b28c2764 because we still seem to have false possitives in the tree. - Revert "ubifs: xattr: Do not operate on deleted inodes" (bsc#1051510). - rpc_pipefs: fix double-dput() (bsc#1051510). - rtc: bq4802: add error handling for devm_ioremap (bsc#1051510). - scsi: qedi: Add the CRC size within iSCSI NVM image (bsc#1110538). - scsi: qedi: Initialize the stats mutex lock (bsc#1110538). - scsi: qla2xxx: do not allow negative thresholds (bsc#1108870). - scsi: qla2xxx: Fix driver hang when FC-NVMe LUNs are configured (bsc#1108870). - scsi: qla2xxx: Fix duplicate switch database entries (bsc#1108870). - scsi: qla2xxx: Fix for double free of SRB structure (bsc#1108870). - scsi: qla2xxx: Fix NVMe session hang on unload (bsc#1108870). - scsi: qla2xxx: Fix NVMe Target discovery (bsc#1108870). - scsi: qla2xxx: Fix recursive mailbox timeout (bsc#1108870). - scsi: qla2xxx: Fix re-using LoopID when handle is in use (bsc#1108870). - scsi: qla2xxx: Move log messages before issuing command to firmware (bsc#1108870). - scsi: qla2xxx: Return switch command on a timeout (bsc#1108870). - selftests/x86: Add tests for the STR and SLDT instructions (bsc#1110006). - selftests/x86: Add tests for User-Mode Instruction Prevention (bsc#1110006). - serial: 8250_exar: Read INT0 from slave device, too (bsc#1051510). - serial: cpm_uart: return immediately from console poll (bsc#1051510). - serial: imx: restore handshaking irq for imx1 (bsc#1051510). - soc: fsl: qe: Fix copy/paste bug in ucc_get_tdm_sync_shift() (bsc#1051510). - soc: mediatek: pwrap: fix cipher init setting error (bsc#1051510). - soreuseport: initialise timewait reuseport field (bsc#1051510). - spi: rspi: Fix interrupted DMA transfers (bsc#1051510). - spi: rspi: Fix invalid SPI use during system suspend (bsc#1051510). - spi: sh-msiof: Fix handling of write value for SISTR register (bsc#1051510). - spi: sh-msiof: Fix invalid SPI use during system suspend (bsc#1051510). - spi: tegra20-slink: explicitly enable/disable clock (bsc#1051510). - squashfs: be more careful about metadata corruption (bsc#1051510). - Squashfs: Compute expected length from inode size rather than block length (bsc#1051510). - squashfs metadata 2: electric boogaloo (bsc#1051510). - squashfs: more metadata hardening (bsc#1051510). - supported.conf: added cavium_ptp - supported.conf: mark raspberrypi-hwmon as supported - thermal: of-thermal: disable passive polling when thermal zone is disabled (bsc#1051510). - tracing/x86/xen: Remove zero data size trace events trace_xen_mmu_flush_tlb{_all} (bsc#1110006). - tsl2550: fix lux1_input error in low light (bsc#1051510). - tty: Drop tty->count on tty_reopen() failure (bsc#1051510). - tty: rocket: Fix possible buffer overwrite on register_PCI (bsc#1051510). - tty: serial: exar: Relocate sleep wake-up handling (bsc#1051510). - tty: serial: lpuart: avoid leaking struct tty_struct (bsc#1051510). - tty: vt_ioctl: fix potential Spectre v1 (bsc#1051510). - ubifs: Check for name being NULL while mounting (bsc#1051510). - udp: Unbreak modules that rely on external __skb_recv_udp() availability (bsc#1109151). - uprobes/x86: Prohibit probing on MOV SS instruction (bsc#1110006). - usb: add quirk for WORLDE Controller KS49 or Prodipe MIDI 49C USB controller (bsc#1051510). - usb: Add quirk to support DJI CineSSD (bsc#1051510). - usb: Avoid use-after-free by flushing endpoints early in usb_set_interface() (bsc#1051510). - usb: cdc_acm: Do not leak URB buffers (bsc#1051510). - usb: dwc2: Turn on uframe_sched on "amlogic" platforms (bsc#1102881). - usb: dwc2: Turn on uframe_sched on "bcm" platforms (bsc#1102881). - usb: dwc2: Turn on uframe_sched on "his" platforms (bsc#1102881). - usb: dwc2: Turn on uframe_sched on "stm32f4x9_fsotg" platforms (bsc#1102881). - usb: fix error handling in usb_driver_claim_interface() (bsc#1051510). - usb: handle NULL config in usb_find_alt_setting() (bsc#1051510). - usb: host: u132-hcd: Fix a sleep-in-atomic-context bug in u132_get_frame() (bsc#1051510). - usb: misc: uss720: Fix two sleep-in-atomic-context bugs (bsc#1051510). - usb: musb: dsps: do not disable CPPI41 irq in driver teardown (bsc#1051510). - usb: uas: add support for more quirk flags (bsc#1051510). - usb: wusbcore: security: cast sizeof to int for comparison (bsc#1051510). - usb: yurex: Fix buffer over-read in yurex_write() (bsc#1051510). - uwb: hwa-rc: fix memory leak at probe (bsc#1051510). - vfs/proc/kcore, x86/mm/kcore: Fix SMAP fault when dumping vsyscall user page (bsc#1110006). - virtio: pci-legacy: Validate queue pfn (bsc#1051510). - x86-64/realmode: Add instruction suffix (bsc#1110006). - x86: Add check for APIC access address for vmentry of L2 guests (bsc#1110006). - x86/alternatives: Fixup alternative_call_2 (bsc#1110006). - x86/apic: Set up through-local-APIC mode on the boot CPU if 'noapic' specified (bsc#1110006). - x86/asm: Add _ASM_ARG* constants for argument registers to <asm/asm.h> (bsc#1110006). - x86/asm: Allow again using asm.h when building for the 'bpf' clang target (bsc#1110006). - x86/asm: Do not use the confusing '.ifeq' directive (bsc#1110006). - x86/boot/64: Verify alignment of the LOAD segment (bsc#1110006). - x86/boot/compressed/64: Print error if 5-level paging is not supported (bsc#1110006). - x86/boot: Fix if_changed build flip/flop bug (bsc#1110006). - x86/boot: Relocate definition of the initial state of CR0 (bsc#1110006). - x86/build: Beautify build log of syscall headers (bsc#1110006). - x86: Call fixup_exception() before notify_die() in math_error() (bsc#1110006). - x86/cpu: Add a microcode loader callback (bsc#1110006). - x86/cpu/amd: Apply the Erratum 688 fix when the BIOS does not (bsc#1110006). - x86/cpu/amd: Have smp_num_siblings and cpu_llc_id always be present (bsc#1110006). - x86/cpu: Check CPU feature bits after microcode upgrade (bsc#1110006). - x86/cpufeatures: Add Intel PCONFIG cpufeature (bsc#1110006). - x86/cpu/intel: Add missing TLB cpuid values (bsc#1110006). - x86/debug: Handle warnings before the notifier chain, to fix KGDB crash (bsc#1110006). - x86/decoder: Add new TEST instruction pattern (bsc#1110006). - x86: Delay skip of emulated hypercall instruction (bsc#1110006). - x86/efi: Fix efi_call_phys_epilog() with CONFIG_X86_5LEVEL=y (bsc#1110006). - x86/entry/64: Add two more instruction suffixes (bsc#1110006). - x86/entry/64: Use 'xorl' for faster register clearing (bsc#1110006). - x86/entry: Reduce the code footprint of the 'idtentry' macro (bsc#1110006). - x86/entry: Use SYSCALL_DEFINE() macros for sys_modify_ldt() (bsc#1110006). - x86/fpu/debug: Remove unused 'x86_fpu_state' and 'x86_fpu_deactivate_state' tracepoints (bsc#1110006). - x86/fpu: Make XSAVE check the base CPUID features before enabling (bsc#1110006). - x86/fpu: Parse clearcpuid= as early XSAVE argument (bsc#1110006). - x86/fpu: Remove the explicit clearing of XSAVE dependent features (bsc#1110006). - x86/hyperv: Check for required priviliges in hyperv_init() (bsc#1110006). - x86: i8259: Add missing include file (bsc#1110006). - x86/intel_rdt: Enable CMT and MBM on new Skylake stepping (bsc#1110006). - x86/intel_rdt: Fix incorrect returned value when creating rdgroup sub-directory in resctrl file system (bsc#1110006). - x86/intel_rdt: Fix potential deadlock during resctrl mount (bsc#1110006). - x86/intel_rdt: Fix potential deadlock during resctrl unmount (bsc#1110006). - x86/irq: Remove an old outdated comment about context tracking races (bsc#1110006). - x86/Kconfig: Limit NR_CPUS on 32-bit to a sane amount (bsc#1110006). - x86/kexec: Make kexec (mostly) work in 5-level paging mode (bsc#1110006). - x86/kprobes: Fix kernel crash when probing .entry_trampoline code (bsc#1110006). - x86: kvm: avoid unused variable warning (bsc#1110006). - x86/kvm/vmx: Do not set l1tf_flush_l1d from vmx_handle_external_intr() (bsc#1110006). - x86/kvm/vmx: Do not set l1tf_flush_l1d to true from vmx_l1d_flush() (bsc#1110006). - x86/kvm/vmx: Move the l1tf_flush_l1d test to vmx_l1d_flush() (bsc#1110006). - x86/kvm/vmx: Remove duplicate l1d flush definitions (bsc#1110006). - x86/kvm/vmx: Replace 'vmx_l1d_flush_always' with 'vmx_l1d_flush_cond' (bsc#1110006). - x86/ldt: Avoid warning in 32-bit builds with older gcc (bsc#1110006). - x86/mce: Add notifier_block forward declaration (bsc#1110006). - x86/mce/amd: Define a function to get SMCA bank type (bsc#1110006). - x86/mce/amd: Get address from already initialized block (bsc#1110006). - x86/mce: Check for alternate indication of machine check recovery on Skylake (bsc#1110006). - x86/mce: Do not overwrite MCi_STATUS in mce_no_way_out() (bsc#1110006). - x86/mce: Fix incorrect "Machine check from unknown source" message (bsc#1110006). - x86/mce: Remove min interval polling limitation (bsc#1110006). - x86/mce: Report only DRAM ECC as memory errors on AMD systems (bsc#1110006). - x86/mce: Serialize sysfs changes (bsc#1110006). - x86/microcode: Allow late microcode loading with SMT disabled (bsc#1110006). - x86/microcode: Attempt late loading only when new microcode is present (bsc#1110006). - x86/microcode: Do not exit early from __reload_late() (bsc#1110006). - x86/microcode: Do not upload microcode if CPUs are offline (bsc#1110006). - x86/microcode: Fix CPU synchronization routine (bsc#1110006). - x86/microcode: Get rid of struct apply_microcode_ctx (bsc#1110006). - x86/microcode/intel: Check microcode revision before updating sibling threads (bsc#1110006). - x86/microcode/intel: Fix memleak in save_microcode_patch() (bsc#1110006). - x86/microcode/intel: Look into the patch cache first (bsc#1110006). - x86/microcode/intel: Save microcode patch unconditionally (bsc#1110006). - x86/microcode/intel: Writeback and invalidate caches before updating microcode (bsc#1110006). - x86/microcode: Make sure boot_cpu_data.microcode is up-to-date (bsc#1110006). - x86/microcode: Make the late update update_lock a raw lock for RT (bsc#1110006). - x86/microcode: Propagate return value from updating functions (bsc#1110006). - x86/microcode: Request microcode on the BSP (bsc#1110006). - x86/microcode: Synchronize late microcode loading (bsc#1110006). - x86/microcode: Update the new microcode revision unconditionally (bsc#1110006). - x86/mm/32: Initialize the CR4 shadow before __flush_tlb_all() (bsc#1110006). - x86/mm/64: Rename the register_page_bootmem_memmap() 'size' parameter to 'nr_pages' (bsc#1110006). - x86/mm: Define _PAGE_TABLE using _KERNPG_TABLE (bsc#1110006). - x86/mm: Do not forbid _PAGE_RW before init for __ro_after_init (bsc#1110006). - x86/mm: Fix bogus warning during EFI bootup, use boot_cpu_has() instead of this_cpu_has() in build_cr3_noflush() (bsc#1110006). - x86/mm/kmmio: Fix mmiotrace for page unaligned addresses (bsc#1110006). - x86/mm/kmmio: Make the tracer robust against L1TF (bsc#1110006). - x86/mm/pat: Make set_memory_np() L1TF safe (bsc#1110006). - x86/mm/pti: Add an overflow check to pti_clone_pmds() (bsc#1110006). - x86/mm/pti: Fix PTI comment in entry_SYSCALL_64() (bsc#1110006). - x86/mm: Relocate page fault error codes to traps.h (bsc#1110006). - x86/mm: Remove in_nmi() warning from vmalloc_fault() (bsc#1110006). - x86/nmi: Fix NMI uaccess race against CR3 switching (bsc#1110006). - x86/numa_emulation: Fix emulated-to-physical node mapping (bsc#1110006). - x86/oprofile: Fix bogus GCC-8 warning in nmi_setup() (bsc#1110006). - x86/pae: use 64 bit atomic xchg function in native_ptep_get_and_clear (bsc#1110006). - x86/paravirt: Remove 'noreplace-paravirt' cmdline option (bsc#1110006). - x86/pgtable: Do not set huge PUD/PMD on non-leaf entries (bsc#1110006). - x86: PM: Make APM idle driver initialize polling state (bsc#1110006). - x86/power: Fix swsusp_arch_resume prototype (bsc#1110006). - x86/pti: Check the return value of pti_user_pagetable_walk_p4d() (bsc#1110006). - x86/pti: Check the return value of pti_user_pagetable_walk_pmd() (bsc#1110006). - x86/retpoline/checksum32: Convert assembler indirect jumps (bsc#1110006). - x86/retpoline/irq32: Convert assembler indirect jumps (bsc#1110006). - x86/smpboot: Do not use mwait_play_dead() on AMD systems (bsc#1110006). - x86/smp: fix non-SMP broken build due to redefinition of apic_id_is_primary_thread (bsc#1110006). - x86/spectre: Fix spelling mistake: "vunerable"-> "vulnerable" (bsc#1110006). - x86/speculation/l1tf: Exempt zeroed PTEs from inversion (bsc#1110006). - x86/speculation/l1tf: Extend 64bit swap file size limit (bsc#1110006). - x86/speculation/l1tf: Fix up pte->pfn conversion for PAE (bsc#1110006). - x86/speculation/l1tf: Invert all not present mappings (bsc#1110006). - x86/speculation/l1tf: Make pmd/pud_mknotpresent() invert (bsc#1110006). - x86/speculation/l1tf: Protect PAE swap entries against L1TF (bsc#1110006). - x86/speculation, objtool: Annotate indirect calls/jumps for objtool on 32-bit kernels (bsc#1110006). - x86/speculation: Simplify sysfs report of VMX L1TF vulnerability (bsc#1110006). - x86/topology: Update the 'cpu cores' field in /proc/cpuinfo correctly across CPU hotplug operations (bsc#1110006). - x86/tsc: Add missing header to tsc_msr.c (bsc#1110006). - x86/tsc: Allow TSC calibration without PIT (bsc#1110006). - x86/tsc: Prevent 32bit truncation in calc_hpet_ref() (bsc#1110006). - x86/vdso: Fix asm constraints on vDSO syscall fallbacks (bsc#1110006). - x86/vdso: Fix vDSO syscall fallback asm constraint regression (bsc#1110006). - x86/xen: Delay get_cpu_cap until stack canary is established (bsc#1110006). - x86/xen: do not write ptes directly in 32-bit PV guests (bsc#1110006). - x86/xen: Drop 5-level paging support code from the XEN_PV code (bsc#1110006). - x86/xen: Reset VCPU0 info pointer after shared_info remap (bsc#1110006). - xen/PVH: Set up GS segment for stack canary (bsc#1110006). - xen/x86/vpmu: Zero struct pt_regs before calling into sample handling code (bsc#1110006). - xen: Fix {set,clear}_foreign_p2m_mapping on autotranslating guests (bsc#1110006). Special Instructions and Notes: Please reboot the system after installing this update. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.0: zypper in -t patch openSUSE-2018-1162=1 Package List: - openSUSE Leap 15.0 (x86_64): kernel-debug-4.12.14-lp150.12.22.1 kernel-debug-base-4.12.14-lp150.12.22.1 kernel-debug-base-debuginfo-4.12.14-lp150.12.22.1 kernel-debug-debuginfo-4.12.14-lp150.12.22.1 kernel-debug-debugsource-4.12.14-lp150.12.22.1 kernel-debug-devel-4.12.14-lp150.12.22.1 kernel-debug-devel-debuginfo-4.12.14-lp150.12.22.1 kernel-default-4.12.14-lp150.12.22.1 kernel-default-base-4.12.14-lp150.12.22.1 kernel-default-base-debuginfo-4.12.14-lp150.12.22.1 kernel-default-debuginfo-4.12.14-lp150.12.22.1 kernel-default-debugsource-4.12.14-lp150.12.22.1 kernel-default-devel-4.12.14-lp150.12.22.1 kernel-default-devel-debuginfo-4.12.14-lp150.12.22.1 kernel-kvmsmall-4.12.14-lp150.12.22.1 kernel-kvmsmall-base-4.12.14-lp150.12.22.1 kernel-kvmsmall-base-debuginfo-4.12.14-lp150.12.22.1 kernel-kvmsmall-debuginfo-4.12.14-lp150.12.22.1 kernel-kvmsmall-debugsource-4.12.14-lp150.12.22.1 kernel-kvmsmall-devel-4.12.14-lp150.12.22.1 kernel-kvmsmall-devel-debuginfo-4.12.14-lp150.12.22.1 kernel-obs-build-4.12.14-lp150.12.22.1 kernel-obs-build-debugsource-4.12.14-lp150.12.22.1 kernel-obs-qa-4.12.14-lp150.12.22.1 kernel-syms-4.12.14-lp150.12.22.1 kernel-vanilla-4.12.14-lp150.12.22.1 kernel-vanilla-base-4.12.14-lp150.12.22.1 kernel-vanilla-base-debuginfo-4.12.14-lp150.12.22.1 kernel-vanilla-debuginfo-4.12.14-lp150.12.22.1 kernel-vanilla-debugsource-4.12.14-lp150.12.22.1 kernel-vanilla-devel-4.12.14-lp150.12.22.1 kernel-vanilla-devel-debuginfo-4.12.14-lp150.12.22.1 - openSUSE Leap 15.0 (noarch): kernel-devel-4.12.14-lp150.12.22.1 kernel-docs-4.12.14-lp150.12.22.1 kernel-docs-html-4.12.14-lp150.12.22.1 kernel-macros-4.12.14-lp150.12.22.1 kernel-source-4.12.14-lp150.12.22.1 kernel-source-vanilla-4.12.14-lp150.12.22.1 References: https://bugzilla.suse.com/1046540 https://bugzilla.suse.com/1050319 https://bugzilla.suse.com/1050536 https://bugzilla.suse.com/1050540 https://bugzilla.suse.com/1051510 https://bugzilla.suse.com/1067126 https://bugzilla.suse.com/1086283 https://bugzilla.suse.com/1086288 https://bugzilla.suse.com/1099125 https://bugzilla.suse.com/1100132 https://bugzilla.suse.com/1102881 https://bugzilla.suse.com/1103308 https://bugzilla.suse.com/1106105 https://bugzilla.suse.com/1106110 https://bugzilla.suse.com/1106237 https://bugzilla.suse.com/1106240 https://bugzilla.suse.com/1106838 https://bugzilla.suse.com/1107685 https://bugzilla.suse.com/1108241 https://bugzilla.suse.com/1108468 https://bugzilla.suse.com/1108828 https://bugzilla.suse.com/1108841 https://bugzilla.suse.com/1108870 https://bugzilla.suse.com/1109151 https://bugzilla.suse.com/1109158 https://bugzilla.suse.com/1109217 https://bugzilla.suse.com/1109784 https://bugzilla.suse.com/1110006 https://bugzilla.suse.com/1110096 https://bugzilla.suse.com/1110538 https://bugzilla.suse.com/1110561 https://bugzilla.suse.com/1110921 https://bugzilla.suse.com/1111028 https://bugzilla.suse.com/1111076

1 0

openSUSE-RU-2018:3143-1: moderate: Recommended update for yast2-support
by maintenance＠opensuse.org 13 Oct '18

13 Oct '18

openSUSE Recommended Update: Recommended update for yast2-support ______________________________________________________________________________ Announcement ID: openSUSE-RU-2018:3143-1 Rating: moderate References: #1093358 #1099691 Affected Products: openSUSE Leap 15.0 ______________________________________________________________________________ An update that has two recommended fixes can now be installed. Description: This update for yast2-support provides the following fixes: - Make the "Next" button to submit the gathered information visible in ncurses. (bsc#1093358) - Make the Contact Information screen fit in a 80x24 terminal. - Add additional search keys to the desktop file. (fate#321043, bsc#1099691) This update was imported from the SUSE:SLE-15:Update update project. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.0: zypper in -t patch openSUSE-2018-1161=1 Package List: - openSUSE Leap 15.0 (noarch): yast2-support-4.0.1-lp150.2.3.1 References: https://bugzilla.suse.com/1093358 https://bugzilla.suse.com/1099691

1 0

openSUSE-RU-2018:3142-1: important: Recommended update for tinyca2
by maintenance＠opensuse.org 12 Oct '18

12 Oct '18

openSUSE Recommended Update: Recommended update for tinyca2 ______________________________________________________________________________ Announcement ID: openSUSE-RU-2018:3142-1 Rating: important References: #1072060 Affected Products: openSUSE Leap 15.0 openSUSE Backports SLE-15 ______________________________________________________________________________ An update that has one recommended fix can now be installed. Description: This update for tinyca2 fixes the following issues: - Make the tool work on Tumbleweed by fixing a deprecated perl code (boo#1072060) - Cleaned specfile Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.0: zypper in -t patch openSUSE-2018-1160=1 - openSUSE Backports SLE-15: zypper in -t patch openSUSE-2018-1160=1 Package List: - openSUSE Leap 15.0 (noarch): tinyca2-0.7.5-lp150.2.3.1 - openSUSE Backports SLE-15 (noarch): tinyca2-0.7.5-bp150.3.3.1 References: https://bugzilla.suse.com/1072060

1 0

openSUSE-RU-2018:3141-1: moderate: Recommended update for yast2-support
by maintenance＠opensuse.org 12 Oct '18

12 Oct '18

openSUSE Recommended Update: Recommended update for yast2-support ______________________________________________________________________________ Announcement ID: openSUSE-RU-2018:3141-1 Rating: moderate References: #1093358 Affected Products: openSUSE Leap 42.3 ______________________________________________________________________________ An update that has one recommended fix can now be installed. Description: This update for yast2-support provides the following fixes: - Make the "Next" button to submit the gathered information visible in ncurses (bsc#1093358) - Make the Contact Information screen fit in a 80x24 terminal This update was imported from the SUSE:SLE-12-SP3:Update update project. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 42.3: zypper in -t patch openSUSE-2018-1156=1 Package List: - openSUSE Leap 42.3 (noarch): yast2-support-3.2.1-2.3.1 References: https://bugzilla.suse.com/1093358

1 0