June 2013 - openSUSE Updates - openSUSE Mailing Lists

openSUSE-RU-2013:0988-1: lxc: Ensure umask is called before creating device nodes
by maintenance＠opensuse.org 10 Jun '13

10 Jun '13

openSUSE Recommended Update: lxc: Ensure umask is called before creating device nodes ______________________________________________________________________________ Announcement ID: openSUSE-RU-2013:0988-1 Rating: low References: #816456 Affected Products: openSUSE 12.3 ______________________________________________________________________________ An update that has one recommended fix can now be installed. Description: This update fixes the following issue with lxc: - bnc#816456: Ensure umask is called before creating device nodes Patch Instructions: To install this openSUSE Recommended Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE 12.3: zypper in -t patch openSUSE-2013-459 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE 12.3 (i586 x86_64): lxc-0.8.0-3.13.1 lxc-debuginfo-0.8.0-3.13.1 lxc-debugsource-0.8.0-3.13.1 lxc-devel-0.8.0-3.13.1 References: https://bugzilla.novell.com/816456

1 0

openSUSE-RU-2013:0987-1: autoyast2: Several bugfixes
by maintenance＠opensuse.org 10 Jun '13

10 Jun '13

openSUSE Recommended Update: autoyast2: Several bugfixes ______________________________________________________________________________ Announcement ID: openSUSE-RU-2013:0987-1 Rating: low References: #565557 #803577 #811688 Affected Products: openSUSE 12.3 ______________________________________________________________________________ An update that has three recommended fixes can now be installed. Description: This update fixes the following issues for autoyast: - bnc#811688: prevent execution of init-scripts before they are fetched - bnc#565557: recognize mounted device also when by-id names are used in /proc/mounts - bnc#803577: prevent kill of autoyast-initscripts.service by systemd Patch Instructions: To install this openSUSE Recommended Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE 12.3: zypper in -t patch openSUSE-2013-362 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE 12.3 (noarch): autoyast2-2.23.6-1.4.1 autoyast2-installation-2.23.6-1.4.1 References: https://bugzilla.novell.com/565557 https://bugzilla.novell.com/803577 https://bugzilla.novell.com/811688

1 0

openSUSE-RU-2013:0986-1: moderate: yast2-country, yast2-installation: fixed issue with encoding if nothing is configured
by maintenance＠opensuse.org 10 Jun '13

10 Jun '13

openSUSE Recommended Update: yast2-country, yast2-installation: fixed issue with encoding if nothing is configured ______________________________________________________________________________ Announcement ID: openSUSE-RU-2013:0986-1 Rating: moderate References: #815265 Affected Products: openSUSE 12.3 ______________________________________________________________________________ An update that has one recommended fix can now be installed. Description: This update fixes the following issues with yast2-country and yast2-installation: - yast2-country: + bnc#815265: do not use non-UTF encoding fallback when nothing is configured - yast2-installation: + bnc#815265: if RC_LANG is not set, use en_US as default in startup-scripts Patch Instructions: To install this openSUSE Recommended Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE 12.3: zypper in -t patch openSUSE-2013-442 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE 12.3 (i586 x86_64): yast2-country-2.23.2-1.4.1 yast2-country-data-2.23.2-1.4.1 - openSUSE 12.3 (noarch): yast2-installation-2.23.15-1.12.2 yast2-installation-devel-doc-2.23.15-1.12.2 References: https://bugzilla.novell.com/815265

1 0

openSUSE-SU-2013:0985-1: moderate: update for strongswan
by opensuse-security＠opensuse.org 10 Jun '13

10 Jun '13

openSUSE Security Update: update for strongswan ______________________________________________________________________________ Announcement ID: openSUSE-SU-2013:0985-1 Rating: moderate References: #815236 Cross-References: CVE-2013-2944 Affected Products: openSUSE 11.4 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: Applied upstream patch for security vulnerability discovered by Kevin Wojtysiak in ECDSA signature verification of the strongswan openssl plugin. Patch Instructions: To install this openSUSE Security Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE 11.4: zypper in -t patch 2013-77 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE 11.4 (i586 x86_64): strongswan-4.5.0-6.52.1 strongswan-debugsource-4.5.0-6.52.1 strongswan-doc-4.5.0-6.52.1 strongswan-ikev1-4.5.0-6.52.1 strongswan-ikev1-debuginfo-4.5.0-6.52.1 strongswan-ikev2-4.5.0-6.52.1 strongswan-ikev2-debuginfo-4.5.0-6.52.1 strongswan-ipsec-4.5.0-6.52.1 strongswan-ipsec-debuginfo-4.5.0-6.52.1 strongswan-libs0-4.5.0-6.52.1 strongswan-libs0-debuginfo-4.5.0-6.52.1 strongswan-mysql-4.5.0-6.52.1 strongswan-mysql-debuginfo-4.5.0-6.52.1 strongswan-nm-4.5.0-6.52.1 strongswan-nm-debuginfo-4.5.0-6.52.1 strongswan-sqlite-4.5.0-6.52.1 strongswan-sqlite-debuginfo-4.5.0-6.52.1 References: http://support.novell.com/security/cve/CVE-2013-2944.html https://bugzilla.novell.com/815236

1 0

openSUSE-RU-2013:0984-1: mysql-workbench: Fix paramiko version check
by maintenance＠opensuse.org 10 Jun '13

10 Jun '13

openSUSE Recommended Update: mysql-workbench: Fix paramiko version check ______________________________________________________________________________ Announcement ID: openSUSE-RU-2013:0984-1 Rating: low References: #809460 Affected Products: openSUSE 12.3 ______________________________________________________________________________ An update that has one recommended fix can now be installed. Description: This update fixes the following issue with mysql-workbench: - bnc#809460: Fix paramiko version check Patch Instructions: To install this openSUSE Recommended Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE 12.3: zypper in -t patch openSUSE-2013-392 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE 12.3 (x86_64): mysql-workbench-5.2.44-2.4.1 mysql-workbench-debuginfo-5.2.44-2.4.1 mysql-workbench-debugsource-5.2.44-2.4.1 - openSUSE 12.3 (i586): mysql-workbench-5.2.44-2.4.2 mysql-workbench-debuginfo-5.2.44-2.4.2 mysql-workbench-debugsource-5.2.44-2.4.2 References: https://bugzilla.novell.com/809460

1 0

openSUSE-RU-2013:0983-1: python-veusz: Two fixes
by maintenance＠opensuse.org 10 Jun '13

10 Jun '13

openSUSE Recommended Update: python-veusz: Two fixes ______________________________________________________________________________ Announcement ID: openSUSE-RU-2013:0983-1 Rating: low References: #822768 Affected Products: openSUSE 12.3 ______________________________________________________________________________ An update that has one recommended fix can now be installed. Description: This update fixes the following isssues with python-veusz: - bnc#822768: plot axes would ignore stacking order of widgets and always be painted atop everything else - fix incorrectly drawn reverse broken axis; patch taken from upstream git and rebased to 1.17.1. Patch Instructions: To install this openSUSE Recommended Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE 12.3: zypper in -t patch openSUSE-2013-477 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE 12.3 (i586 x86_64): python-veusz-1.17.1-4.12.1 python-veusz-debuginfo-1.17.1-4.12.1 python-veusz-debugsource-1.17.1-4.12.1 References: https://bugzilla.novell.com/822768

1 0

openSUSE-RU-2013:0982-1: gnome-games: several fixes
by maintenance＠opensuse.org 10 Jun '13

10 Jun '13

openSUSE Recommended Update: gnome-games: several fixes ______________________________________________________________________________ Announcement ID: openSUSE-RU-2013:0982-1 Rating: low References: #815331 Affected Products: openSUSE 12.3 ______________________________________________________________________________ An update that has one recommended fix can now be installed. Description: gnome-games was updated to fix a crash in glines and several issues with glchess (bnc#815331): - glines: fix segfault in 32-bit version - glchess: fix being able to castle when square being moved over is threatened by a pawn - glchess: chess history doesn't work very well - glchess: fix AI hang when Phalanx attempts to promote Patch Instructions: To install this openSUSE Recommended Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE 12.3: zypper in -t patch openSUSE-2013-377 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE 12.3 (i586 x86_64): glchess-3.6.1-2.4.1 glchess-debuginfo-3.6.1-2.4.1 glines-3.6.1-2.4.1 glines-debuginfo-3.6.1-2.4.1 gnect-3.6.1-2.4.1 gnect-debuginfo-3.6.1-2.4.1 gnibbles-3.6.1-2.4.1 gnibbles-debuginfo-3.6.1-2.4.1 gnobots2-3.6.1-2.4.1 gnobots2-debuginfo-3.6.1-2.4.1 gnome-games-3.6.1-2.4.1 gnome-games-debugsource-3.6.1-2.4.1 gnome-games-recommended-3.6.1-2.4.1 gnome-games-support-3.6.1-2.4.1 gnome-mahjongg-3.6.1-2.4.1 gnome-mahjongg-debuginfo-3.6.1-2.4.1 gnome-sudoku-3.6.1-2.4.1 gnomine-3.6.1-2.4.1 gnomine-debuginfo-3.6.1-2.4.1 gnotravex-3.6.1-2.4.1 gnotravex-debuginfo-3.6.1-2.4.1 gnotski-3.6.1-2.4.1 gnotski-debuginfo-3.6.1-2.4.1 gtali-3.6.1-2.4.1 gtali-debuginfo-3.6.1-2.4.1 iagno-3.6.1-2.4.1 iagno-debuginfo-3.6.1-2.4.1 lightsoff-3.6.1-2.4.1 lightsoff-debuginfo-3.6.1-2.4.1 quadrapassel-3.6.1-2.4.1 quadrapassel-debuginfo-3.6.1-2.4.1 swell-foop-3.6.1-2.4.1 swell-foop-debuginfo-3.6.1-2.4.1 - openSUSE 12.3 (noarch): glchess-lang-3.6.1-2.4.1 glines-lang-3.6.1-2.4.1 gnect-lang-3.6.1-2.4.1 gnibbles-lang-3.6.1-2.4.1 gnobots2-lang-3.6.1-2.4.1 gnome-games-support-lang-3.6.1-2.4.1 gnome-mahjongg-lang-3.6.1-2.4.1 gnome-sudoku-lang-3.6.1-2.4.1 gnomine-lang-3.6.1-2.4.1 gnotravex-lang-3.6.1-2.4.1 gnotski-lang-3.6.1-2.4.1 gtali-lang-3.6.1-2.4.1 iagno-lang-3.6.1-2.4.1 lightsoff-lang-3.6.1-2.4.1 quadrapassel-lang-3.6.1-2.4.1 swell-foop-lang-3.6.1-2.4.1 References: https://bugzilla.novell.com/815331

1 0

openSUSE-RU-2013:0981-1: python-py2pack: Update to 0.4.3.4
by maintenance＠opensuse.org 10 Jun '13

10 Jun '13

openSUSE Recommended Update: python-py2pack: Update to 0.4.3.4 ______________________________________________________________________________ Announcement ID: openSUSE-RU-2013:0981-1 Rating: low References: Affected Products: openSUSE 12.3 ______________________________________________________________________________ An update that has 0 recommended fixes can now be installed. Description: This update pushes python-py2pack to the current version 0.4.3.4. - 0.4.3.4: + catch more doc files - 0.4.3.3: + Various bugfixes - 0.4.3: + Generate SPDX-style licenses + Find documentation files from local tarball + Detect C extensions from local tarball Patch Instructions: To install this openSUSE Recommended Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE 12.3: zypper in -t patch openSUSE-2013-419 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE 12.3 (noarch): python-py2pack-0.4.3.4-4.4.1 References:

1 0

openSUSE-RU-2013:0980-1: vm-install: Several bugfixes
by maintenance＠opensuse.org 10 Jun '13

10 Jun '13

openSUSE Recommended Update: vm-install: Several bugfixes ______________________________________________________________________________ Announcement ID: openSUSE-RU-2013:0980-1 Rating: low References: #809464 #812626 #813639 #820085 Affected Products: openSUSE 12.3 ______________________________________________________________________________ An update that has four recommended fixes can now be installed. Description: This udpate fixes the following issues with vm-install: - bnc#820085: ncurses vm-install on s390x fails with "Error: XML error: No PCI buses available" - bnc#812626: Virt-Install prepends string causing error when pointing to ISO - bnc#813639: vm-install can't automatically generate correct prefix of image type in 'Source' text field while indicating a existing tap image file - bnc#809464: vm-install fails when selecting PXE as the boot method with PV guest Patch Instructions: To install this openSUSE Recommended Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE 12.3: zypper in -t patch openSUSE-2013-476 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE 12.3 (i586 x86_64): vm-install-0.6.18-1.4.1 References: https://bugzilla.novell.com/809464 https://bugzilla.novell.com/812626 https://bugzilla.novell.com/813639 https://bugzilla.novell.com/820085

1 0

openSUSE-SU-2013:0979-1: moderate: update for openconnect
by opensuse-security＠opensuse.org 10 Jun '13

10 Jun '13

openSUSE Security Update: update for openconnect ______________________________________________________________________________ Announcement ID: openSUSE-SU-2013:0979-1 Rating: moderate References: #817152 Cross-References: CVE-2012-6128 Affected Products: openSUSE 12.3 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: This version update fixes several bugs: - Frequent connection drops fixed (bnc#817152). - Update to version 4.09 * Fix overflow on HTTP request buffers (CVE-2012-6128)(bnc#803347) * Fix connection to servers with round-robin DNS with two-stage auth/connect. * Impose minimum MTU of 1280 bytes. * Fix some harmless issues reported by Coverity. * Improve "Attempting to connect..." message to be explicit when it's connecting to a proxy. - Update to version 4.07 * Fix segmentation fault when invoked with -p argument. * Fix handling of write stalls on CSTP (TCP) socket. - Update to version 4.06 * Fix default CA location for non-Fedora systems with old GnuTLS. * Improve error handing when vpnc-script exits with error. * Handle PKCS#11 tokens which won't list keys without login. - Update to version 4.05 * Use correct CSD script for Mac OS X. * Fix endless loop in PIN cache handling with multiple PKCS#11 tokens. * Fix PKCS#11 URI handling to preserve all attributes. * Don't forget key password on GUI reconnect. * Fix GnuTLS v3 build on OpenBSD. - Update to version 4.04 * Fix GnuTLS password handling for PKCS#8 files. - Update to version 4.03 * Fix --no-proxy option. * Fix handling of requested vs. received MTU settings. * Fix DTLS MTU for GnuTLS 3.0.21 and newer. * Support more ciphers for OpenSSL encrypted PEM keys, with GnuTLS. * Fix GnuTLS compatibilty issue with servers that insist on TLSv1.0 or non-AES ciphers (RH#836558). - Update to version 4.02 * Fix build failure due to unconditional inclusion of <gnutls/dtls.h>. - Update to version 4.01 * Add support for OpenSSL's odd encrypted PKCS#1 files, for GnuTLS. * Fix repeated passphrase retry for OpenSSL. * Add keystore support for Android. * Support TPM, and also additional checks on PKCS#11 certs, even with GnuTLS 2.12. * Fix library references to OpenSSL's ERR_print_errors_cb() when built against GnuTLS v2.12. - Update to version 4.00 * Add support for OpenSSL's odd encrypted PKCS#1 files, for GnuTLS. * Fix repeated passphrase retry for OpenSSL. * Add keystore support for Android. * Support TPM, and also additional checks on PKCS#11 certs, even with GnuTLS 2.12. * Fix library references to OpenSSL's ERR_print_errors_cb() when built against GnuTLS v2.12. Patch Instructions: To install this openSUSE Security Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE 12.3: zypper in -t patch openSUSE-2013-429 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE 12.3 (i586 x86_64): openconnect-4.08-3.4.1 openconnect-debuginfo-4.08-3.4.1 openconnect-debugsource-4.08-3.4.1 openconnect-devel-4.08-3.4.1 openconnect-doc-4.08-3.4.1 - openSUSE 12.3 (noarch): openconnect-lang-4.08-3.4.1 References: http://support.novell.com/security/cve/CVE-2012-6128.html https://bugzilla.novell.com/817152

1 0

openSUSE-RU-2013:0978-1: tftp: fixed incorrect default permission of /srv/tftpboot
by maintenance＠opensuse.org 10 Jun '13

10 Jun '13

openSUSE Recommended Update: tftp: fixed incorrect default permission of /srv/tftpboot ______________________________________________________________________________ Announcement ID: openSUSE-RU-2013:0978-1 Rating: low References: #813226 Affected Products: openSUSE 12.3 ______________________________________________________________________________ An update that has one recommended fix can now be installed. Description: This update fixes the following issue with tftp: - bnc#813226: change ownership of /srv/tftpboot to tftp:tftp, otherwise tftp daemon can't write here Patch Instructions: To install this openSUSE Recommended Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE 12.3: zypper in -t patch openSUSE-2013-370 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE 12.3 (i586 x86_64): tftp-5.2-3.5.1 tftp-debuginfo-5.2-3.5.1 tftp-debugsource-5.2-3.5.1 References: https://bugzilla.novell.com/813226

1 0

openSUSE-SU-2013:0977-1: moderate: update for python-httplib2
by opensuse-security＠opensuse.org 10 Jun '13

10 Jun '13

openSUSE Security Update: update for python-httplib2 ______________________________________________________________________________ Announcement ID: openSUSE-SU-2013:0977-1 Rating: moderate References: #818100 Affected Products: openSUSE 12.3 ______________________________________________________________________________ An update that contains security fixes can now be installed. Description: This update of python-httplib2 fixed broken SSL certification verification. Patch Instructions: To install this openSUSE Security Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE 12.3: zypper in -t patch openSUSE-2013-415 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE 12.3 (noarch): python-httplib2-0.7.6-2.4.1 References: https://bugzilla.novell.com/818100

1 0

openSUSE-RU-2013:0976-1: mysql-connector-cpp: Adjusted to make LibreOffice updates easier.
by maintenance＠opensuse.org 10 Jun '13

10 Jun '13

openSUSE Recommended Update: mysql-connector-cpp: Adjusted to make LibreOffice updates easier. ______________________________________________________________________________ Announcement ID: openSUSE-RU-2013:0976-1 Rating: low References: Affected Products: openSUSE 12.3 ______________________________________________________________________________ An update that has 0 recommended fixes can now be installed. Description: This update fixes the following issue with mysql-connector-cpp: - merge with mysql-connector-c++ - fixed broken build - Adjusted to make LibreOffice updates easier. Patch Instructions: To install this openSUSE Recommended Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE 12.3: zypper in -t patch openSUSE-2013-465 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE 12.3 (i586 x86_64): libmysqlcppconn-devel-1.1.0-7.5.1 libmysqlcppconn5-1.1.0-7.5.1 libmysqlcppconn5-debuginfo-1.1.0-7.5.1 mysql-connector-cpp-debugsource-1.1.0-7.5.1 References:

1 0

openSUSE-RU-2013:0975-1: digikam: Update to 3.1.0 and an additional fix
by maintenance＠opensuse.org 10 Jun '13

10 Jun '13

openSUSE Recommended Update: digikam: Update to 3.1.0 and an additional fix ______________________________________________________________________________ Announcement ID: openSUSE-RU-2013:0975-1 Rating: low References: #814622 #816693 Affected Products: openSUSE 12.3 ______________________________________________________________________________ An update that has two recommended fixes can now be installed. Description: This update fixes the following issues for digikam: - bnc#814622, kde#311393: fixed detection of certain cameras - bnc#816693: Update to 3.1.0 + General * Remove internal lqr-1 library code. Set only an optional and external dependency + fixes: * kde#237037: SQLITE : convience copy in digiKam core [patch] * kde#257773: Switch to full screen mode crash under MACOSX * kde#269033: digikam crashed after startup * kde#301503: No progress indicator or cancel button * kde#303217: Cannot preview TIFF files on Mac OS due to "not enough memory" exceptions * kde#308696: no thumbnails on first start of geolocation module for newly imported images * kde#313902: OSM maps not refreshing * kde#314260: Large .tif files are not loaded * kde#314726: digiKam BQM RAW tool doesn't have options to work in 16 bits and to manage color profiles * kde#315284: digikam crashes when quitting the program + showfoto: * kde#314697: Print image does not work + kipi-plugins: * kde#295265: Provide hicolor panoramagui icon * kde#306482: Wrong rotation for images after Piwigo Export * kde#311005: "Edit all Metadata" allows to edit unchecked fields - results in data loss * kde#314784: imgurtalkerauth.cpp with digikam 3.0 breaks during build * kde#314836: Panorama plugin segfault with non-ascii characters in file paths * kde#315302: TimeAdjust is not shown in Gwenview [patch] Patch Instructions: To install this openSUSE Recommended Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE 12.3: zypper in -t patch openSUSE-2013-375 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE 12.3 (i586 x86_64): digikam-3.1.0-1.7.1 digikam-debuginfo-3.1.0-1.7.1 digikam-debugsource-3.1.0-1.7.1 kipi-plugins-3.1.0-1.7.1 kipi-plugins-acquireimage-3.1.0-1.7.1 kipi-plugins-acquireimage-debuginfo-3.1.0-1.7.1 kipi-plugins-debuginfo-3.1.0-1.7.1 kipi-plugins-geolocation-3.1.0-1.7.1 kipi-plugins-geolocation-debuginfo-3.1.0-1.7.1 libkface-devel-3.1.0-1.7.1 libkface1-3.1.0-1.7.1 libkface1-debuginfo-3.1.0-1.7.1 libkgeomap-devel-3.1.0-1.7.1 libkgeomap1-3.1.0-1.7.1 libkgeomap1-debuginfo-3.1.0-1.7.1 libmediawiki-devel-3.1.0-1.7.1 libmediawiki1-3.1.0-1.7.1 libmediawiki1-debuginfo-3.1.0-1.7.1 - openSUSE 12.3 (noarch): digikam-doc-3.1.0-1.7.1 digikam-lang-3.1.0-1.7.1 kipi-plugins-lang-3.1.0-1.7.1 libkgeomap-lang-3.1.0-1.7.1 References: https://bugzilla.novell.com/814622 https://bugzilla.novell.com/816693

1 0

openSUSE-RU-2013:0974-1: taglib: followup fix for corrupted non-russian-text in tags
by maintenance＠opensuse.org 10 Jun '13

10 Jun '13

openSUSE Recommended Update: taglib: followup fix for corrupted non-russian-text in tags ______________________________________________________________________________ Announcement ID: openSUSE-RU-2013:0974-1 Rating: low References: #814814 Affected Products: openSUSE 12.3 ______________________________________________________________________________ An update that has one recommended fix can now be installed. Description: This update is a followup fix for taglib: - bnc#814814: Fixed non-russian text in tags Patch Instructions: To install this openSUSE Recommended Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE 12.3: zypper in -t patch openSUSE-2013-472 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE 12.3 (i586 x86_64): libtag-devel-1.8-3.9.1 libtag1-1.8-3.9.1 libtag1-debuginfo-1.8-3.9.1 libtag_c0-1.8-3.9.1 libtag_c0-debuginfo-1.8-3.9.1 taglib-1.8-3.9.1 taglib-debuginfo-1.8-3.9.1 taglib-debugsource-1.8-3.9.1 - openSUSE 12.3 (x86_64): libtag1-32bit-1.8-3.9.1 libtag1-debuginfo-32bit-1.8-3.9.1 libtag_c0-32bit-1.8-3.9.1 libtag_c0-debuginfo-32bit-1.8-3.9.1 References: https://bugzilla.novell.com/814814

1 0

openSUSE-RU-2013:0973-1: moderate: xtrabackup: updated to 2.0.7
by maintenance＠opensuse.org 10 Jun '13

10 Jun '13

openSUSE Recommended Update: xtrabackup: updated to 2.0.7 ______________________________________________________________________________ Announcement ID: openSUSE-RU-2013:0973-1 Rating: moderate References: #818819 Affected Products: openSUSE 12.3 ______________________________________________________________________________ An update that has one recommended fix can now be installed. Description: xtrabackup was updated to 2.0.7 [bnc#818819] Changes: * Time interval between checks done by log copying thread is now configurable by innobackupex --log-copy-interval. Bugs fixed: * Tables that were dropped between taking a full backup and an incremental one were present in the full backup directory, and were not removed when incremental backups has been merged * Percona XtraBackup would leave stale xtrabackup_tmp* files in the datadir after applying incremental backups. * Fixed couple of warnings found in innobackupex when all warnings have been made FATAL. * If there are thousands of tables and slow IO then XtraBackup can spend a lot of time opening all the tablespaces. Optimization has been implemented and XtraBackup now avoids loading non-relevant tablespaces when partial backup is being taken which speeds up the backup process. * Percona XtraBackup didn’t initialize per-thread data in the log copying thread which could cause XtraBackup to crash. * innobackupex would still run with FLUSH TABLES WITH READ LOCK even if xtrabackup would fail when copying logs. Fixed by terminating xtrabackup process immediately on log copying failure * innobackupex would fail if the SQL_MODE was set to ANSI_QUOTES. * Missing space_id from *.ibd.meta would lead to assertion. Fixed by replacing the assertion with the error message. * Fixed the typo in the innobackupex error output. * innobackupex wasn’t handling the innodb_data_file_path option which could cause backup to fail. * Redundant code has been removed from xtrabackup.cc. Patch Instructions: To install this openSUSE Recommended Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE 12.3: zypper in -t patch openSUSE-2013-450 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE 12.3 (i586 x86_64): xtrabackup-2.0.7-2.12.1 xtrabackup-debuginfo-2.0.7-2.12.1 xtrabackup-debugsource-2.0.7-2.12.1 References: https://bugzilla.novell.com/818819

1 0

openSUSE-RU-2013:0972-1: gkrellm: build against libsensors
by maintenance＠opensuse.org 10 Jun '13

10 Jun '13

openSUSE Recommended Update: gkrellm: build against libsensors ______________________________________________________________________________ Announcement ID: openSUSE-RU-2013:0972-1 Rating: low References: #803081 #803967 Affected Products: openSUSE 12.3 ______________________________________________________________________________ An update that has two recommended fixes can now be installed. Description: This update fixes the following issue with gkrellm: - bnc#803081, bnc#803967: really build against libsensors Patch Instructions: To install this openSUSE Recommended Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE 12.3: zypper in -t patch openSUSE-2013-387 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE 12.3 (i586 x86_64): gkrellm-2.3.5-14.6.1 gkrellm-debuginfo-2.3.5-14.6.1 gkrellm-devel-2.3.5-14.6.1 - openSUSE 12.3 (noarch): gkrellm-lang-2.3.5-14.6.1 References: https://bugzilla.novell.com/803081 https://bugzilla.novell.com/803967

1 0

openSUSE-RU-2013:0971-1: rsyslog, libestr, liblognorm: Several fixes
by maintenance＠opensuse.org 10 Jun '13

10 Jun '13

openSUSE Recommended Update: rsyslog, libestr, liblognorm: Several fixes ______________________________________________________________________________ Announcement ID: openSUSE-RU-2013:0971-1 Rating: low References: #809852 #812447 Affected Products: openSUSE 12.3 ______________________________________________________________________________ An update that has two recommended fixes can now be installed. Description: This update fixes the following issues for rsyslog, libestr and liblognorm: - rsyslog: + bnc#809852: update to 7.2.7 [v7-stable] 2013-04-17: * rsyslogd startup information is now properly conveyed back to init when privileges are beging dropped. Actually, we have moved termination of the parent in front of the priv drop. So it shall work now in all cases. See code comments in commit for more details. * If forking, the parent now waits for a maximum of 60 seconds for termination by the child * Improved debugging support in forked (auto-backgrounding) mode. The rsyslog debug log file is now continued to be written across the fork. * updated systemd files to match current systemd source * bugfix: failover/action suspend did not work correctly. This was experienced if the retry action took more than one second to complete. For suspending, a cached timestamp was used, and if the retry took longer, that timestamp was already in the past. As a result, the action never was kept in suspended state, and as such no failover happened. The suspend functionalit now does no longer use the cached timestamp (should not have any performance implication, as action suspend occurs very infrequently). * bugfix: nested if/prifilt conditions did not work properly * bugfix: script == comparison did not work properly on JSON objects * bugfix: imudp scheduling parameters did affect main thread, not imudp * bugfix: imuxsock rate-limiting could not be configured via legacy conf. Rate-limiting for the system socket could not be configured via legacy configuration directives. However, the new-style RainerScript config options worked. * bugfix: using group resolution could lead to endless loop * bugfix: $mmnormalizeuseramsg paramter was specified with wrong type * bugfix: RainerScript getenv() function caused segfault when var was not found. * bugfix: several issues in imkmsg (see bug tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=421#c8) * bugfix: imuxsock was missing SysSock.ParseTrusted module parameter. To use that functionality, legacy rsyslog.conf syntax had to be used. Also, the doc was missing information on the "ParseTrusted" set of config directives. * bugfix: parameter action.execOnlyWhenPreviousIsSuspended was accidently of integer-type. For obvious reasons, it needs to be boolean. Note that this change can break existing configurations if they circumvented the problem by using 0/1 values. * doc bugfix: rsyslog.conf man page had invalid file format info + update to 7.2.6 [v7-stable] 2013-03-05: * slightly improved config parser error messages when invalid escapes happen * bugfix: include files got included in the wrong order. This happens if an $IncludeConfig directive was done on multiple files (e.g. the distro default of $IncludeConfig /etc/rsyslog.d/*.conf). In that case, the order of include file processing is reversed, which could lead to all sorts of problems. * bugfix: omelasticsearch failed when authentication data was provided ... at least in most cases it emitted an error message: "snprintf failed when trying to build auth string" * bugfix: some property-based filter were incorrectly parsed. This usually lead to a syntax error on startup and rsyslogd not actually starting up. The problem was the regex, which did not care for double quote characters to follow in the action part - unfortunately something that can frequently happen with v6+ format. An example: | :programname, isequal, "as" {action(type="omfile" ...) } | Here, the part | :programname, isequal, "as" {action(type="omfile" | was treated as the property filter, and the rest as action part. Obviously, this did not work out. Unfortunately, such situations usually resulted in very hard to understand error messages. + Removed rsyslog.conf from doc file list, not shipped any more. + bnc#812447: restore SELinux label when creating xconsole - liblognorm: + bnc#809852: Update to 0.3.6: * bugfix: unitialized variable could lead to rulebase load error - liberf: + bnc#809852: Update to 0.1.5: * bugfix: es_strncmp() did not work correctly Patch Instructions: To install this openSUSE Recommended Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE 12.3: zypper in -t patch openSUSE-2013-403 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE 12.3 (i586 x86_64): libestr-debugsource-0.1.5-2.4.1 libestr-devel-0.1.5-2.4.1 libestr0-0.1.5-2.4.1 libestr0-debuginfo-0.1.5-2.4.1 liblognorm-debugsource-0.3.6-3.4.1 liblognorm-devel-0.3.6-3.4.1 liblognorm0-0.3.6-3.4.1 liblognorm0-debuginfo-0.3.6-3.4.1 rsyslog-7.2.7-2.5.1 rsyslog-debuginfo-7.2.7-2.5.1 rsyslog-debugsource-7.2.7-2.5.1 rsyslog-diag-tools-7.2.7-2.5.1 rsyslog-diag-tools-debuginfo-7.2.7-2.5.1 rsyslog-doc-7.2.7-2.5.1 rsyslog-module-dbi-7.2.7-2.5.1 rsyslog-module-dbi-debuginfo-7.2.7-2.5.1 rsyslog-module-elasticsearch-7.2.7-2.5.1 rsyslog-module-elasticsearch-debuginfo-7.2.7-2.5.1 rsyslog-module-gssapi-7.2.7-2.5.1 rsyslog-module-gssapi-debuginfo-7.2.7-2.5.1 rsyslog-module-gtls-7.2.7-2.5.1 rsyslog-module-gtls-debuginfo-7.2.7-2.5.1 rsyslog-module-mmnormalize-7.2.7-2.5.1 rsyslog-module-mmnormalize-debuginfo-7.2.7-2.5.1 rsyslog-module-mysql-7.2.7-2.5.1 rsyslog-module-mysql-debuginfo-7.2.7-2.5.1 rsyslog-module-pgsql-7.2.7-2.5.1 rsyslog-module-pgsql-debuginfo-7.2.7-2.5.1 rsyslog-module-relp-7.2.7-2.5.1 rsyslog-module-relp-debuginfo-7.2.7-2.5.1 rsyslog-module-snmp-7.2.7-2.5.1 rsyslog-module-snmp-debuginfo-7.2.7-2.5.1 rsyslog-module-udpspoof-7.2.7-2.5.1 rsyslog-module-udpspoof-debuginfo-7.2.7-2.5.1 References: https://bugzilla.novell.com/809852 https://bugzilla.novell.com/812447

1 0

openSUSE-RU-2013:0970-1: moderate: python-scipy: Update to version 0.12.0
by maintenance＠opensuse.org 10 Jun '13

10 Jun '13

openSUSE Recommended Update: python-scipy: Update to version 0.12.0 ______________________________________________________________________________ Announcement ID: openSUSE-RU-2013:0970-1 Rating: moderate References: #815424 Affected Products: openSUSE 12.3 ______________________________________________________________________________ An update that has one recommended fix can now be installed. Description: This update fixes the following issue with python-scipy: - Update to version 0.12.0 (bnc#815424): Some of the highlights of this release are: * Completed QHull wrappers in scipy.spatial. * cKDTree now a drop-in replacement for KDTree. * A new global optimizer, basinhopping. * Support for Python 2 and Python 3 from the same code base (no more 2to3). Patch Instructions: To install this openSUSE Recommended Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE 12.3: zypper in -t patch openSUSE-2013-391 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE 12.3 (i586 x86_64): python-scipy-0.12.0-3.6.1 python-scipy-debuginfo-0.12.0-3.6.1 python-scipy-debugsource-0.12.0-3.6.1 python-scipy-weave-0.12.0-3.6.1 python3-scipy-0.12.0-3.6.1 python3-scipy-debuginfo-0.12.0-3.6.1 python3-scipy-debugsource-0.12.0-3.6.1 python3-scipy-weave-0.12.0-3.6.1 References: https://bugzilla.novell.com/815424

1 0

openSUSE-RU-2013:0969-1: moderate: zsh: Don't set globdots option, it might lead to unexpected problems
by maintenance＠opensuse.org 10 Jun '13

10 Jun '13

openSUSE Recommended Update: zsh: Don't set globdots option, it might lead to unexpected problems ______________________________________________________________________________ Announcement ID: openSUSE-RU-2013:0969-1 Rating: moderate References: #815556 Affected Products: openSUSE 12.3 ______________________________________________________________________________ An update that has one recommended fix can now be installed. Description: This update fixes the following issue with zsh: - bnc#815556: Don't set globdots option. The globdots option leads to '*' matching dotfiles, which could cause unexpected problems Patch Instructions: To install this openSUSE Recommended Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE 12.3: zypper in -t patch openSUSE-2013-381 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE 12.3 (i586 x86_64): zsh-5.0.2-2.9.1 zsh-debuginfo-5.0.2-2.9.1 zsh-debugsource-5.0.2-2.9.1 zsh-htmldoc-5.0.2-2.9.1 References: https://bugzilla.novell.com/815556

1 0

openSUSE-RU-2013:0968-1: bash-completion: Two Fixes
by maintenance＠opensuse.org 10 Jun '13

10 Jun '13

openSUSE Recommended Update: bash-completion: Two Fixes ______________________________________________________________________________ Announcement ID: openSUSE-RU-2013:0968-1 Rating: low References: #717151 #794686 Affected Products: openSUSE 12.3 ______________________________________________________________________________ An update that has two recommended fixes can now be installed. Description: This update fixes the following issues with bash-completion: - bnc#717151: avoid blanks after during file completion - bnc#794686: Fix some missing tilde escapes resulting in hangs Patch Instructions: To install this openSUSE Recommended Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE 12.3: zypper in -t patch openSUSE-2013-408 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE 12.3 (noarch): bash-completion-2.0-2.4.1 References: https://bugzilla.novell.com/717151 https://bugzilla.novell.com/794686

1 0

openSUSE-SU-2013:0967-1: moderate: krb5
by opensuse-security＠opensuse.org 10 Jun '13

10 Jun '13

openSUSE Security Update: krb5 ______________________________________________________________________________ Announcement ID: openSUSE-SU-2013:0967-1 Rating: moderate References: #816413 Cross-References: CVE-2013-1416 Affected Products: openSUSE 11.4 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: - fix prep_reprocess_req NULL pointer deref CVE-2013-1416 (bnc#816413) bug-816413-CVE-2013-1416-prep_reprocess_req-NULL-ptr-deref.d if Patch Instructions: To install this openSUSE Security Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE 11.4: zypper in -t patch 2013-73 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE 11.4 (i586 x86_64): krb5-1.8.3-59.1 krb5-client-1.8.3-59.1 krb5-client-debuginfo-1.8.3-59.1 krb5-debuginfo-1.8.3-59.1 krb5-debugsource-1.8.3-59.1 krb5-devel-1.8.3-59.1 krb5-plugin-kdb-ldap-1.8.3-59.1 krb5-plugin-kdb-ldap-debuginfo-1.8.3-59.1 krb5-plugin-preauth-pkinit-1.8.3-59.1 krb5-plugin-preauth-pkinit-debuginfo-1.8.3-59.1 krb5-server-1.8.3-59.1 krb5-server-debuginfo-1.8.3-59.1 - openSUSE 11.4 (x86_64): krb5-32bit-1.8.3-59.1 krb5-debuginfo-32bit-1.8.3-59.1 krb5-devel-32bit-1.8.3-59.1 - openSUSE 11.4 (ia64): krb5-debuginfo-x86-1.8.3-59.1 krb5-x86-1.8.3-59.1 References: http://support.novell.com/security/cve/CVE-2013-1416.html https://bugzilla.novell.com/816413

1 0

openSUSE-SU-2013:0966-1: moderate: Package icedtea-web was updated to version 1.4
by opensuse-security＠opensuse.org 10 Jun '13

10 Jun '13

openSUSE Security Update: Package icedtea-web was updated to version 1.4 ______________________________________________________________________________ Announcement ID: openSUSE-SU-2013:0966-1 Rating: moderate References: #818768 Cross-References: CVE-2012-3422 CVE-2012-3423 CVE-2013-1926 CVE-2013-1927 Affected Products: openSUSE 11.4 ______________________________________________________________________________ An update that fixes four vulnerabilities is now available. Description: Changes in icedtea-web with update to 1.4 (bnc#818768): * Added cs, de, pl localization * Splash screen for javaws and plugin * Better error reporting for plugin via Error-splash-screen * All IcedTea-Web dialogues are centered to middle of active screen * Download indicator made compact for more then one jar * User can select its own JVM via itw-settings and deploy.properties. * Added extended applets security settings and dialogue * Security updates - CVE-2013-1926, RH916774: Class-loader incorrectly shared for applets with same relative-path. - CVE-2013-1927, RH884705: fixed gifar vulnerabilit - CVE-2012-3422, RH840592: Potential read from an uninitialized memory location - CVE-2012-3423, RH841345: Incorrect handling of not 0-terminated strings * NetX - PR1027: DownloadService is not supported by IcedTea-Web - PR725: JNLP applications will prompt for creating desktop shortcuts every time they are run - PR1292: Javaws does not resolve versioned jar names with periods correctly * Plugin - PR1106: Buffer overflow in plugin table- - PR1166: Embedded JNLP File is not supported in applet tag - PR1217: Add command line arguments for plugins - PR1189: Icedtea-plugin requires code attribute when using jnlp_href - PR1198: JSObject is not passed to javascript correctly - PR1260: IcedTea-Web should not rely on GTK - PR1157: Applets can hang browser after fatal exception - PR580: http://www.horaoficial.cl/ loads improperly * Common - PR1049: Extension jnlp's signed jar with the content of only META-INF/* is considered - PR955: regression: SweetHome3D fails to run - PR1145: IcedTea-Web can cause ClassCircularityError - PR1161: X509VariableTrustManager does not work correctly with OpenJDK7 - PR822: Applets fail to load if jars have different signers - PR1186: System.getProperty("deployment.user.security.trusted.cacerts ") is null - PR909: The Java applet at http://de.gosupermodel.com/games/wardrobegame.jsp fails - PR1299: WebStart doesn't read socket proxy settings from firefox correctly Patch Instructions: To install this openSUSE Security Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE 11.4: zypper in -t patch 2013-86 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE 11.4 (i586 x86_64): icedtea-web-1.4-34.1 icedtea-web-debuginfo-1.4-34.1 icedtea-web-debugsource-1.4-34.1 - openSUSE 11.4 (noarch): icedtea-web-javadoc-1.4-34.1 References: http://support.novell.com/security/cve/CVE-2012-3422.html http://support.novell.com/security/cve/CVE-2012-3423.html http://support.novell.com/security/cve/CVE-2013-1926.html http://support.novell.com/security/cve/CVE-2013-1927.html https://bugzilla.novell.com/818768

1 0

openSUSE-RU-2013:0965-1: important: yast2-mail: fixed hang after ag_postfix_mastercf is killed
by maintenance＠opensuse.org 10 Jun '13

10 Jun '13

openSUSE Recommended Update: yast2-mail: fixed hang after ag_postfix_mastercf is killed ______________________________________________________________________________ Announcement ID: openSUSE-RU-2013:0965-1 Rating: important References: #800788 Affected Products: openSUSE 12.3 ______________________________________________________________________________ An update that has one recommended fix can now be installed. Description: This udpate fixes the following issue with yast2-mail: - bnc#800788: fixed hang of the system after the ag_postfix_mastercf process is killed by kernel, when saving mail server settings with Yast "Mail Server" module - Mark permissions files as %config - The ldap tables was not proper. All functions for forwarding and delivery must be placed in alias_maps and not in virtual_alias_map. Forwarding or delivering actions in virtual_alias_map may cause mail loops. Patch Instructions: To install this openSUSE Recommended Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE 12.3: zypper in -t patch openSUSE-2013-468 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE 12.3 (noarch): yast2-mail-2.21.2-9.9.1 yast2-mail-plugins-2.21.2-9.9.1 References: https://bugzilla.novell.com/800788

1 0

openSUSE-SU-2013:0964-1: moderate: update for java-1_7_0-openjdk
by opensuse-security＠opensuse.org 10 Jun '13

10 Jun '13

openSUSE Security Update: update for java-1_7_0-openjdk ______________________________________________________________________________ Announcement ID: openSUSE-SU-2013:0964-1 Rating: moderate References: #816720 Cross-References: CVE-2013-0401 CVE-2013-1488 CVE-2013-1518 CVE-2013-1537 CVE-2013-1557 CVE-2013-1569 CVE-2013-2383 CVE-2013-2384 CVE-2013-2415 CVE-2013-2417 CVE-2013-2419 CVE-2013-2420 CVE-2013-2421 CVE-2013-2422 CVE-2013-2423 CVE-2013-2424 CVE-2013-2426 CVE-2013-2429 CVE-2013-2430 CVE-2013-2431 CVE-2013-2436 Affected Products: openSUSE 12.3 ______________________________________________________________________________ An update that fixes 21 vulnerabilities is now available. Description: - update to icedtea-2.3.9 (bnc#816720) * Security fixes - S6657673, CVE-2013-1518: Issues with JAXP - S7200507: Refactor Introspector internals - S8000724, CVE-2013-2417: Improve networking serialization - S8001031, CVE-2013-2419: Better font processing - S8001040, CVE-2013-1537: Rework RMI model - S8001322: Refactor deserialization - S8001329, CVE-2013-1557: Augment RMI logging - S8003335: Better handling of Finalizer thread - S8003445: Adjust JAX-WS to focus on API - S8003543, CVE-2013-2415: Improve processing of MTOM attachments - S8004261: Improve input validation - S8004336, CVE-2013-2431: Better handling of method handle intrinsic frames - S8004986, CVE-2013-2383: Better handling of glyph table - S8004987, CVE-2013-2384: Improve font layout - S8004994, CVE-2013-1569: Improve checking of glyph table - S8005432: Update access to JAX-WS - S8005943: (process) Improved Runtime.exec - S8006309: More reliable control panel operation - S8006435, CVE-2013-2424: Improvements in JMX - S8006790: Improve checking for windows - S8006795: Improve font warning messages - S8007406: Improve accessibility of AccessBridge - S8007617, CVE-2013-2420: Better validation of images - S8007667, CVE-2013-2430: Better image reading - S8007918, CVE-2013-2429: Better image writing - S8008140: Better method handle resolution - S8009049, CVE-2013-2436: Better method handle binding - S8009063, CVE-2013-2426: Improve reliability of ConcurrentHashMap - S8009305, CVE-2013-0401: Improve AWT data transfer - S8009677, CVE-2013-2423: Better setting of setters - S8009699, CVE-2013-2421: Methodhandle lookup - S8009814, CVE-2013-1488: Better driver management - S8009857, CVE-2013-2422: Problem with plugin * Backports - S7130662, RH928500: GTK file dialog crashes with a NPE * Bug fixes - PR1363: Fedora 19 / rawhide FTBFS SIGILL - PR1401: Fix Zero build on 2.3.8 - Fix offset problem in ICU LETableReference. - Change -Werror fix to preserve OpenJDK default. - PR1303: Correct #ifdef to #if - PR1404: Failure to bootstrap with ecj 4.2 - Added url as source. Please see http://en.opensuse.org/SourceUrls - icedtea-2.3.8-zero-patches.patch: remove patch not applicable to zero compatible hotspot - java-1.7.0-openjdk-fork.patch: Add support for architectures without fork syscall - java-1.7.0-openjdk-aarch64.patch: Add support for aarch64 Patch Instructions: To install this openSUSE Security Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE 12.3: zypper in -t patch openSUSE-2013-426 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE 12.3 (i586 x86_64): java-1_7_0-openjdk-1.7.0.6-8.14.5 java-1_7_0-openjdk-debuginfo-1.7.0.6-8.14.5 java-1_7_0-openjdk-debugsource-1.7.0.6-8.14.5 java-1_7_0-openjdk-demo-1.7.0.6-8.14.5 java-1_7_0-openjdk-demo-debuginfo-1.7.0.6-8.14.5 java-1_7_0-openjdk-devel-1.7.0.6-8.14.5 java-1_7_0-openjdk-devel-debuginfo-1.7.0.6-8.14.5 java-1_7_0-openjdk-javadoc-1.7.0.6-8.14.5 java-1_7_0-openjdk-src-1.7.0.6-8.14.5 References: http://support.novell.com/security/cve/CVE-2013-0401.html http://support.novell.com/security/cve/CVE-2013-1488.html http://support.novell.com/security/cve/CVE-2013-1518.html http://support.novell.com/security/cve/CVE-2013-1537.html http://support.novell.com/security/cve/CVE-2013-1557.html http://support.novell.com/security/cve/CVE-2013-1569.html http://support.novell.com/security/cve/CVE-2013-2383.html http://support.novell.com/security/cve/CVE-2013-2384.html http://support.novell.com/security/cve/CVE-2013-2415.html http://support.novell.com/security/cve/CVE-2013-2417.html http://support.novell.com/security/cve/CVE-2013-2419.html http://support.novell.com/security/cve/CVE-2013-2420.html http://support.novell.com/security/cve/CVE-2013-2421.html http://support.novell.com/security/cve/CVE-2013-2422.html http://support.novell.com/security/cve/CVE-2013-2423.html http://support.novell.com/security/cve/CVE-2013-2424.html http://support.novell.com/security/cve/CVE-2013-2426.html http://support.novell.com/security/cve/CVE-2013-2429.html http://support.novell.com/security/cve/CVE-2013-2430.html http://support.novell.com/security/cve/CVE-2013-2431.html http://support.novell.com/security/cve/CVE-2013-2436.html https://bugzilla.novell.com/816720

1 0