June 2020 - openSUSE Kernel Bugs - openSUSE Mailing Lists

[kernel-bugs] [Bug 1173115] zypper dup from 15.1 shows mok screen on reboot
by bugzilla_noreply＠suse.com 19 Jun '20

19 Jun '20

https://bugzilla.suse.com/show_bug.cgi?id=1173115 https://bugzilla.suse.com/show_bug.cgi?id=1173115#c8 --- Comment #8 from Ludwig Nussel <lnussel(a)suse.com> --- Well in case of our kernel it's guaranteed as the CA cert is built into shim. The whole setup in obs is made so shim, grub and kernel match and work out of the box. So the case where the sign key chains back to our our CA cert can be optimized. So far we never imported the sign key itself either after all and relied on the CA only. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[kernel-bugs] [Bug 1173115] zypper dup from 15.1 shows mok screen on reboot
by bugzilla_noreply＠suse.com 19 Jun '20

19 Jun '20

https://bugzilla.suse.com/show_bug.cgi?id=1173115 https://bugzilla.suse.com/show_bug.cgi?id=1173115#c7 --- Comment #7 from Michal Suchanek <msuchanek(a)suse.com> --- It's not necessarily the case. The kernel (and modules) is signed with some key and if not imported it breaks secure boot. As in you won't be able to boot kernel signed with the key. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[kernel-bugs] [Bug 1173115] zypper dup from 15.1 shows mok screen on reboot
by bugzilla_noreply＠suse.com 19 Jun '20

19 Jun '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1173115 http://bugzilla.opensuse.org/show_bug.cgi?id=1173115#c6 --- Comment #6 from Ludwig Nussel <lnussel(a)suse.com> --- ok, got it. It's caused by CONFIG_MODULE_SIG=y. With that enabled, the %post snippet wants to import the extra cert. It's not imported directly but rather added to some "to be imported queue" for next reboot. On reboot, a dialog with a 10s timeout is shown before grub. It asks to press a key to enter Mok key management. To actually import the key, one has to perform several steps in that wizard, including entering the root password. Not pressing a key will just continue boot, not import the key and don't bother anymore (until the next kernel update?). In other words, the whole stunt seems pointless and just confusing. Since kernel module signatures chain back to the secure boot CA built into shim we don't need that extra cert anyways, right? So can we just skip importing it? -- You are receiving this mail because: You are the assignee for the bug.

1 0

[kernel-bugs] [Bug 1173115] zypper dup from 15.1 shows mok screen on reboot
by bugzilla_noreply＠suse.com 19 Jun '20

19 Jun '20

https://bugzilla.suse.com/show_bug.cgi?id=1173115 https://bugzilla.suse.com/show_bug.cgi?id=1173115#c5 --- Comment #5 from Michal Suchanek <msuchanek(a)suse.com> --- If there is significant difference in scripts between 15.1 and 15.2 that's a bug. The scripts in the kernel-source repo are identical and changed only cosmetically since 15.1 beta. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[kernel-bugs] [Bug 1173115] zypper dup from 15.1 shows mok screen on reboot
by bugzilla_noreply＠suse.com 19 Jun '20

19 Jun '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1173115 http://bugzilla.opensuse.org/show_bug.cgi?id=1173115#c4 Ludwig Nussel <lnussel(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Component|Bootloader |Kernel Hardware|IA64 |x86-64 Assignee|screening-team-bugs(a)suse.de |kernel-bugs(a)opensuse.org --- Comment #4 from Ludwig Nussel <lnussel(a)suse.com> --- Moving to kernel then. If that behavior is intentional we should document it in the release notes. It feels a bit like a layering violation to mess with the certs in the kernel %post also. Shouldn't update-bootloader take care of the certs instead? -- You are receiving this mail because: You are the assignee for the bug.

1 0

[kernel-bugs] [Bug 1171677] USB-C external hub randomly stops working
by bugzilla_noreply＠suse.com 19 Jun '20

19 Jun '20

https://bugzilla.suse.com/show_bug.cgi?id=1171677 Matthias Brugger <mbrugger(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Assignee|kernel-bugs(a)opensuse.org |oneukum(a)suse.com -- You are receiving this mail because: You are the assignee for the bug.

1 0

[kernel-bugs] [Bug 1173085] Realtek RTL8117 NIC not recognized by Leap 15.2 RC (regression from 15.1)
by bugzilla_noreply＠suse.com 19 Jun '20

19 Jun '20

https://bugzilla.suse.com/show_bug.cgi?id=1173085 https://bugzilla.suse.com/show_bug.cgi?id=1173085#c13 --- Comment #13 from Takashi Iwai <tiwai(a)suse.com> --- FYI, I created another test kernel in OBS home:tiwai:bsc1173085-2 repo containing more backports. If 5.7 kernel worked, please give this a try. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[kernel-bugs] [Bug 1173085] Realtek RTL8117 NIC not recognized by Leap 15.2 RC (regression from 15.1)
by bugzilla_noreply＠suse.com 19 Jun '20

19 Jun '20

https://bugzilla.suse.com/show_bug.cgi?id=1173085 https://bugzilla.suse.com/show_bug.cgi?id=1173085#c12 Takashi Iwai <tiwai(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Flags| |needinfo?(seroton10(a)gmail.c | |om) --- Comment #12 from Takashi Iwai <tiwai(a)suse.com> --- Also, could you confirm that 5.7.x kernel in OBS Kernel:stable works? If that's confirmed, I can try to backport up to 5.7. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[kernel-bugs] [Bug 1173138] New: Kernel 5.7.1 stuck at booting on HP Elitebook 840G6
by bugzilla_noreply＠suse.com 19 Jun '20

19 Jun '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1173138 Bug ID: 1173138 Summary: Kernel 5.7.1 stuck at booting on HP Elitebook 840G6 Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: huy.phung1292(a)gmail.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created attachment 838956 --> http://bugzilla.opensuse.org/attachment.cgi?id=838956&action=edit Last kernel debug line before hanging. Opensuse Tumbleweed freshly installed, kernel 5.7.1-1. Booting process stuck at 'workqueue lockup'. I uploaded 2 screenshot 1. Last line showed up on boot process before OS stucks in workqueue lockup 2. and 3. The screen when the booting hangs. -- You are receiving this mail because: You are the assignee for the bug.

1 4

[kernel-bugs] [Bug 1173085] Realtek RTL8117 NIC not recognized by Leap 15.2 RC (regression from 15.1)
by bugzilla_noreply＠suse.com 19 Jun '20

19 Jun '20

https://bugzilla.suse.com/show_bug.cgi?id=1173085 https://bugzilla.suse.com/show_bug.cgi?id=1173085#c11 --- Comment #11 from Takashi Iwai <tiwai(a)suse.com> --- You might need to unload realtek kernel module (it's phy driver) beforehand. But, could you upload the full dmesg output with the new kernel? The first probe should have succeeded if everything is right. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[kernel-bugs] [Bug 1173085] Realtek RTL8117 NIC not recognized by Leap 15.2 RC (regression from 15.1)
by bugzilla_noreply＠suse.com 18 Jun '20

18 Jun '20

https://bugzilla.suse.com/show_bug.cgi?id=1173085 https://bugzilla.suse.com/show_bug.cgi?id=1173085#c9 Takashi Iwai <tiwai(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Flags| |needinfo?(seroton10(a)gmail.c | |om) --- Comment #9 from Takashi Iwai <tiwai(a)suse.com> --- Unfortunately there are quite lots of prerequisite commits the fix commit depends on, so in the end I had to apply almost 50 patches to reach there. The test kernel is built in OBS home:tiwai:bsc1173085 repo. It'll appear at http://download.opensuse.org/repositories/home:/tiwai:/bsc1173085/standard/ Please give it a try. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[kernel-bugs] [Bug 1172900] Videoconferencing apps on openSUSE --> much higher CPU and heat than Clear Linux
by bugzilla_noreply＠suse.com 17 Jun '20

17 Jun '20

https://bugzilla.suse.com/show_bug.cgi?id=1172900 https://bugzilla.suse.com/show_bug.cgi?id=1172900#c8 --- Comment #8 from S. B. <sb56637(a)gmail.com> --- Created attachment 838896 --> https://bugzilla.suse.com/attachment.cgi?id=838896&action=edit Clear kernel on openSUSE vs default from same repo Thanks a lot Takashi for helping me to test this. So I tried the default kernel you compiled, and it behaves the same as the current Tumbleweed kernel and all the other major distros I've tested. I also was wondering how much of a difference the kernel boot parameters make. >From the AUR instructions I was using this with the Clear kernel: > quiet console=tty0 console=ttyS0,115200n8 cryptomgr.notests initcall_debug intel_iommu=igfx_off kvm-intel.nested=1 no_timer_check noreplace-smp page_alloc.shuffle=1 rcupdate.rcu_expedited=1 rootfstype=ext4,btrfs,xfs,f2fs tsc=reliable rw So I tested the with just `quiet splash mitigations=off` with the Clear kernel, but apart from some boot warnings it performed about as well. Then I tried the recommended Clear parameter with your kernel-default, and it also threw some boot warnings and performed the same as before with the same kernel. So the performance differences don't seem to be due to the boot parameters. I also realized that my thermal readings are probably being affected by the "ksgrd_network_helper" process that seems to be going a bit crazy, generating almost as much CPU load as Firefox itself. So I'll try to run some more tests later tonight with a lighter GUI system monitor. Please let me know if you need any more info. Cheers. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[kernel-bugs] [Bug 1172911] Raspi 3 kernel crash
by bugzilla_noreply＠suse.com 17 Jun '20

17 Jun '20

https://bugzilla.suse.com/show_bug.cgi?id=1172911 Matthias Brugger <mbrugger(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Assignee|kernel-bugs(a)opensuse.org |mbrugger(a)suse.com -- You are receiving this mail because: You are the assignee for the bug.

1 0

[kernel-bugs] [Bug 1172911] Raspi 3 kernel crash
by bugzilla_noreply＠suse.com 17 Jun '20

17 Jun '20

https://bugzilla.suse.com/show_bug.cgi?id=1172911 https://bugzilla.suse.com/show_bug.cgi?id=1172911#c1 --- Comment #1 from Matthias Brugger <mbrugger(a)suse.com> --- (In reply to Christian Goll from comment #0) > On my Rapspi 3 running a Nextcloud instance I experience stability problems > (no reachable via network any more after approx 1 day) for the actual > kernel. I could not find any hint in the system journal > The kernel version 5.3.18-lp152.10-default runs stable, so using kernel > 5.3.18-lp152.10-default solves the problem for me. Do you mean that you are experiencing problems with kernel-default-5.3.18-lp152.18.1.aarch64.rpm but not with the older lp152.10? -- You are receiving this mail because: You are the assignee for the bug.

1 0

[kernel-bugs] [Bug 1173014] New: TW 2020-06-15 fails to boot on Intel NUC10i7FNK2
by bugzilla_noreply＠suse.com 17 Jun '20

17 Jun '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1173014 Bug ID: 1173014 Summary: TW 2020-06-15 fails to boot on Intel NUC10i7FNK2 Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: x86-64 OS: Linux Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: dostermann912(a)gmail.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created attachment 838877 --> http://bugzilla.opensuse.org/attachment.cgi?id=838877&action=edit Error message on tty5 A fresh Tumbleweed installation (here: 20200615, but 20200614 and 0611 are also faulty) fails to boot after GRUB2 on an Intel NUC10i7FNK2. I get to see the TW EFI boot screen, but the system doesn't switch into graphical user mode. The virtual console on tty5 shows a "BUG: work queue lockup[...]" repeating roughly every minute until the computer freezes completely at some point. See the attachment for the full error message. The error persists after upgrading to the newest EFI firmware and turning off CPU mitigations in the kernel boot parameters. System specifications: - Intel Core i7-10710U - 32GB DDR4-2666 - Samsung EVO Pro 970 512GB - BIOS/EFI Version FN0042 -- You are receiving this mail because: You are the assignee for the bug.

1 4

[kernel-bugs] [Bug 1172905] New: Kernel 5.7.1 does not boot
by bugzilla_noreply＠suse.com 17 Jun '20

17 Jun '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1172905 Bug ID: 1172905 Summary: Kernel 5.7.1 does not boot Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: x86-64 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: p.stolz77(a)googlemail.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- After update to Tumbleweed snapshot 20200612 the new kernel 5.7.1 does not boot. Booting with old kernel 5.6.14 works. -- You are receiving this mail because: You are the assignee for the bug.

1 33

[kernel-bugs] [Bug 1172900] Videoconferencing apps on openSUSE --> much higher CPU and heat than Clear Linux
by bugzilla_noreply＠suse.com 17 Jun '20

17 Jun '20

https://bugzilla.suse.com/show_bug.cgi?id=1172900 https://bugzilla.suse.com/show_bug.cgi?id=1172900#c7 --- Comment #7 from Takashi Iwai <tiwai(a)suse.com> --- Thanks, I'll wait for your feedback. Meanwhile, I built kernel-default from the same source again. It'll be published soon in the same URL above. If the significant improvement is confirmed with kernel-clear, please try kernel-default from that repo and test whether you see the similar improvement. If kernel-default in that repo gets improvements, it implies that it's due to some Clear Linux downstream patches. OTOH, if kernel-default doesn't show the difference, it means that the key point is the kernel config, not the patches. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[kernel-bugs] [Bug 1173023] New: Unexpected change from kernel-firmware to kernel-firmware-all package by 'zypper dup'
by bugzilla_noreply＠suse.com 17 Jun '20

17 Jun '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1173023 Bug ID: 1173023 Summary: Unexpected change from kernel-firmware to kernel-firmware-all package by 'zypper dup' Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: All OS: Other Status: NEW Severity: Enhancement Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: suse+build(a)de-korte.org QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Due to boo#1172905 I recently switched from 'kernel-firmware-all' to 'kernel-firmware' package to work around this bug. This didn't quite work as I expected. Removing 'kernel-firmware-all' would leave the remainder of the 'kernel-firmware-*' packages installed and I had to zypper lock the 'kernel-firmware-all' package after deinstallation. Otherwise 'zypper dup' would insist on reverting back to 'kernel-firmware-all' and removing 'kernel-firmware'. As I understand 'kernel-firmware-all' and 'kernel-firmware' are mutually exclusive and although the first may be preferred over the latter upon first installation, once a choice is made (for whatever reason), zypper should not change to the other. -- You are receiving this mail because: You are the assignee for the bug.

1 1

[kernel-bugs] [Bug 1172900] Videoconferencing apps on openSUSE --> much higher CPU and heat than Clear Linux
by bugzilla_noreply＠suse.com 16 Jun '20

16 Jun '20

https://bugzilla.suse.com/show_bug.cgi?id=1172900 https://bugzilla.suse.com/show_bug.cgi?id=1172900#c6 S. B. <sb56637(a)gmail.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Flags|needinfo?(sb56637(a)gmail.com | |) | --- Comment #6 from S. B. <sb56637(a)gmail.com> --- Created attachment 838878 --> https://bugzilla.suse.com/attachment.cgi?id=838878&action=edit openSUSE with Clear kernel vs stock openSUSE kernel Thanks very much Takashi, you saved a ton of time with that. It does look like the Clear kernel also makes a significant difference on openSUSE. I did the tests on my installed daily driver system, but with Openbox to eliminate some of the variables and to prevent my normal Plasma autostart apps from running. The only weird thing is that there doesn't seem to be a clear (pun not intended) advantage in terms of thermal performance, but that might just be a function of which kernel I tested first and how long the machine was running. Or it might be Clear being more aggressive with the processor. At any rate, I'll use this kernel in a "real" Zoom meeting that I have scheduled for this weekend, and I'll see how it feels, literally, in terms of heat and smell. Please let me know if you'd like any more information. Thanks again! -- You are receiving this mail because: You are the assignee for the bug.

1 0

[kernel-bugs] [Bug 1172900] Videoconferencing apps on openSUSE --> much higher CPU and heat than Clear Linux
by bugzilla_noreply＠suse.com 16 Jun '20

16 Jun '20

https://bugzilla.suse.com/show_bug.cgi?id=1172900 https://bugzilla.suse.com/show_bug.cgi?id=1172900#c5 Takashi Iwai <tiwai(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Flags| |needinfo?(sb56637(a)gmail.com | |) --- Comment #5 from Takashi Iwai <tiwai(a)suse.com> --- Thanks, that's an interesting finding. Now I tried to build a kernel that contains Clear Linux downstream patches and the config aligned with it but slightly adjusted to be usable on TW. It's being built in OBS home:tiwai:test:kernel-clear repo. The new kernel package is "kernel-clear", not "kernel-default", and it'll be available at http://download.opensuse.org/repositories/home:/tiwai:/test:/kernel-clear/s… Download kernel-clear-5.7.*.rpm from there and install it via zypper in kernel-clear-5.7.*.rpm later. And let me know if this brings anything better than kernel-default. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[kernel-bugs] [Bug 1173008] New: Kernel 5.7.1-1 upgrade breaks boot
by bugzilla_noreply＠suse.com 16 Jun '20

16 Jun '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1173008 Bug ID: 1173008 Summary: Kernel 5.7.1-1 upgrade breaks boot Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Critical Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: pointedstick(a)zoho.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created attachment 838862 --> http://bugzilla.opensuse.org/attachment.cgi?id=838862&action=edit Console output when using the 7.1.1 recovery kernel I just got a Tumbleweed snapshot that includes Kernel 5.7.1-1. After installing this update (using `zypper dup`) and rebooting, my system (Lenovo ThinkPad X1 Yoga gen 4) did not progress past the boot splash screen. When using grub to select the 5.7.1-1 recovery kernel, I got a bunch of console spew and the cursor became visible and could be moved, but the system was otherwise frozen and the boot process did not progress, as before. reverting to Kernel 5.6.14 allowed the system to boot normally. Definitely seems like a regression in the 5.7.1-1 kernel. -- You are receiving this mail because: You are the assignee for the bug.

1 1

[kernel-bugs] [Bug 1172900] Videoconferencing apps on openSUSE --> much higher CPU and heat than Clear Linux
by bugzilla_noreply＠suse.com 16 Jun '20

16 Jun '20

https://bugzilla.suse.com/show_bug.cgi?id=1172900 https://bugzilla.suse.com/show_bug.cgi?id=1172900#c4 S. B. <sb56637(a)gmail.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Flags|needinfo?(sb56637(a)gmail.com | |) | --- Comment #4 from S. B. <sb56637(a)gmail.com> --- Created attachment 838855 --> https://bugzilla.suse.com/attachment.cgi?id=838855&action=edit Arch with Clear Linux kernel Hi again, I found the Clear Linux kernel and kernel boot options available for Arch Linux: https://software.opensuse.org/package/linux-clear https://aur.archlinux.org/packages/linux-clear/#pinned-630000 This made it much easier for me to test it. I created an Arch installation on a live USB and installed the above linux-clear package and compared it with the stock Arch kernel. In summary, it does indeed appear that the Clear Linux kernel usually drastically reduces CPU load, whereas the stock Arch kernel behaves approximately the same as the stock openSUSE kernel. I found that Jitsi CPU loads were highly variable, so started testing with a similar service at http://appr.tc, which seems to produce more consistent results. Please let me know if you need any more information. Thanks! -- You are receiving this mail because: You are the assignee for the bug.

1 0

[kernel-bugs] [Bug 1172905] Kernel regression 5.7.1 with iwlwifi 9260 model
by bugzilla_noreply＠suse.com 16 Jun '20

16 Jun '20

https://bugzilla.suse.com/show_bug.cgi?id=1172905 https://bugzilla.suse.com/show_bug.cgi?id=1172905#c35 Jiri Slaby <jslaby(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Resolution|--- |FIXED --- Comment #35 from Jiri Slaby <jslaby(a)suse.com> --- . -- You are receiving this mail because: You are the assignee for the bug.

1 0

[kernel-bugs] [Bug 1172905] Kernel regression 5.7.1 with iwlwifi 9260 model
by bugzilla_noreply＠suse.com 16 Jun '20

16 Jun '20

https://bugzilla.suse.com/show_bug.cgi?id=1172905 https://bugzilla.suse.com/show_bug.cgi?id=1172905#c34 --- Comment #34 from Jiri Slaby <jslaby(a)suse.com> --- SR#814606 pending. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[kernel-bugs] [Bug 1172900] Videoconferencing apps on openSUSE --> much higher CPU and heat than Clear Linux
by bugzilla_noreply＠suse.com 15 Jun '20

15 Jun '20

https://bugzilla.suse.com/show_bug.cgi?id=1172900 https://bugzilla.suse.com/show_bug.cgi?id=1172900#c3 --- Comment #3 from Takashi Iwai <tiwai(a)suse.com> --- Use whatever the config you can build the upstream vanilla kernel :) The point is to build such a kernel on TW, and test whether you get the performance gain. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[kernel-bugs] [Bug 1172900] Videoconferencing apps on openSUSE --> much higher CPU and heat than Clear Linux
by bugzilla_noreply＠suse.com 15 Jun '20

15 Jun '20

https://bugzilla.suse.com/show_bug.cgi?id=1172900 https://bugzilla.suse.com/show_bug.cgi?id=1172900#c2 --- Comment #2 from S. B. <sb56637(a)gmail.com> --- Hi Takashi, thanks for the reply, would this be any easier? https://github.com/clearlinux-pkgs/linux -- You are receiving this mail because: You are the assignee for the bug.

1 0

[kernel-bugs] [Bug 1172905] Kernel 5.7.1 does not boot
by bugzilla_noreply＠suse.com 15 Jun '20

15 Jun '20

https://bugzilla.suse.com/show_bug.cgi?id=1172905 https://bugzilla.suse.com/show_bug.cgi?id=1172905#c22 --- Comment #22 from Peter Stolz <p.stolz77(a)googlemail.com> --- Created attachment 838791 --> https://bugzilla.suse.com/attachment.cgi?id=838791&action=edit Output of dmesg After boot with kernel 5.6.14 -- You are receiving this mail because: You are the assignee for the bug.

1 0

[kernel-bugs] [Bug 1172905] Kernel 5.7.1 does not boot
by bugzilla_noreply＠suse.com 15 Jun '20

15 Jun '20

https://bugzilla.suse.com/show_bug.cgi?id=1172905 https://bugzilla.suse.com/show_bug.cgi?id=1172905#c21 --- Comment #21 from Peter Stolz <p.stolz77(a)googlemail.com> --- Created attachment 838790 --> https://bugzilla.suse.com/attachment.cgi?id=838790&action=edit Output of hwinfo After boot with kernel 5.6.14 -- You are receiving this mail because: You are the assignee for the bug.

1 0

[kernel-bugs] [Bug 1172905] Kernel 5.7.1 does not boot
by bugzilla_noreply＠suse.com 15 Jun '20

15 Jun '20

https://bugzilla.suse.com/show_bug.cgi?id=1172905 https://bugzilla.suse.com/show_bug.cgi?id=1172905#c12 --- Comment #12 from Roger Whittaker <roger.whittaker(a)suse.com> --- I see the same messages attached by Dan in comment#10, on the same hardware Precision 5530. I tested with dis_ucode_ldr and it made no difference. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[kernel-bugs] [Bug 1172911] New: Raspi 3 kernel crash
by bugzilla_noreply＠suse.com 15 Jun '20

15 Jun '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1172911 Bug ID: 1172911 Summary: Raspi 3 kernel crash Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.2 Hardware: aarch64 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: cgoll(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- On my Rapspi 3 running a Nextcloud instance I experience stability problems (no reachable via network any more after approx 1 day) for the actual kernel. I could not find any hint in the system journal The kernel version 5.3.18-lp152.10-default runs stable, so using kernel 5.3.18-lp152.10-default solves the problem for me. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[kernel-bugs] [Bug 1172900] Videoconferencing apps on openSUSE --> much higher CPU and heat than Clear Linux
by bugzilla_noreply＠suse.com 15 Jun '20

15 Jun '20

https://bugzilla.suse.com/show_bug.cgi?id=1172900 https://bugzilla.suse.com/show_bug.cgi?id=1172900#c1 Takashi Iwai <tiwai(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |sb56637(a)gmail.com, | |tiwai(a)suse.com Flags| |needinfo?(sb56637(a)gmail.com | |) --- Comment #1 from Takashi Iwai <tiwai(a)suse.com> --- You can try to build the kernel based on the config of Clear Linux manually on TW and see whether you get the given performance boost. If not, it's a user-space problem. Install linux git repo on the running Clear Linux system, set up the compiler and other tool chains, and run "make localmodconfig". You might need to catch up more via "make oldconfig". Change the CONFIG_LOCAL_VERSION string not to conflict with the existing one, make, and install the kernel, and confirm that the system works. Then you can copy the .config file from there to TW, and build again there in a similar step. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[kernel-bugs] [Bug 1172901] Kernel - AMD-Vi: Unable to read/write to IOMMU perf counter.
by bugzilla_noreply＠suse.com 15 Jun '20

15 Jun '20

https://bugzilla.suse.com/show_bug.cgi?id=1172901 https://bugzilla.suse.com/show_bug.cgi?id=1172901#c1 Takashi Iwai <tiwai(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |tiwai(a)suse.com Assignee|kernel-bugs(a)opensuse.org |jroedel(a)suse.com --- Comment #1 from Takashi Iwai <tiwai(a)suse.com> --- Joerg, could you take a look? -- You are receiving this mail because: You are the assignee for the bug.

1 0

[kernel-bugs] [Bug 1172905] Kernel 5.7.1 does not boot
by bugzilla_noreply＠suse.com 15 Jun '20

15 Jun '20

https://bugzilla.suse.com/show_bug.cgi?id=1172905 https://bugzilla.suse.com/show_bug.cgi?id=1172905#c1 Takashi Iwai <tiwai(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |p.stolz77(a)googlemail.com, | |tiwai(a)suse.com Flags| |needinfo?(p.stolz77@googlem | |ail.com) --- Comment #1 from Takashi Iwai <tiwai(a)suse.com> --- Do you get any crash trace or such if you boot without quiet option? Also try to remove splash=silent, too. And, please boot with the old working kernel, and get hwinfo output from there, and attach to Bugzilla. Give the dmesg output from the working kernel, too. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[kernel-bugs] [Bug 1172901] New: Kernel
by bugzilla_noreply＠suse.com 14 Jun '20

14 Jun '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1172901 Bug ID: 1172901 Summary: Kernel Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.2 Hardware: x86-64 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: rahmspinat(a)gmx.ch QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Ubuntu; Linux x86_64; rv:77.0) Gecko/20100101 Firefox/77.0 Build Identifier: On Lenovo Laptop with Ryzen APU I get the message during boot: pci 0000:00:00.2: AMD-Vi: Unable to read/write to IOMMU perf counter. (dmsg | grep IOMMU) Reproducible: Always Steps to Reproduce: Hardware for reproducing is needed. Actual Results: pci 0000:00:00.2: AMD-Vi: Unable to read/write to IOMMU perf counter. Expected Results: pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40 perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank). The expected result I got when booting Ubuntu 20.04. Seems to be that a certain parameter in kernel config needs to be set. -- You are receiving this mail because: You are the assignee for the bug.

1 1

[kernel-bugs] [Bug 1172900] New: Videoconferencing apps on openSUSE --> much higher CPU and heat than Clear Linux
by bugzilla_noreply＠suse.com 14 Jun '20

14 Jun '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1172900 Bug ID: 1172900 Summary: Videoconferencing apps on openSUSE --> much higher CPU and heat than Clear Linux Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: x86-64 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: sb56637(a)gmail.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created attachment 838777 --> http://bugzilla.opensuse.org/attachment.cgi?id=838777&action=edit lots of screenshots and terminal outputs Hi there, the pandemic has forced a lot of users to spend much more time in videoconferencing apps, which in turn has given more exposure to some of the inefficiencies in the Linux graphics stack. I've been fighting with Jitsi Meet via Firefox and Zoom making my laptop so hot that the fans go full speed, and it smells and feels hot. It's an all-Intel components Thinkpad T530. I also observe even higher CPU loads but slightly less palpable heat on my secondary Thinkpad T440s, also with all-Intel components. And of course, with the addtional CPU load comes much shorter battery life. I've also extensively tested other mainstream distros like the most recent Ubuntu, Fedora, and Manjaro releases with similar results, but since Tumbleweed is the one I actually want to use on this laptop I'm reporting this bug here. As a last resort, I tried Clear Linux on the Thinkpad T530, since I heard Clear was optimized for Intel hardware. Surprisingly, it reported drastically lower CPU load and generally lower heat readings. And to the touch/smell the machine was obviously cooler and less stressed. The Firefox CPU load with Jitsi under Clear Linux was similar to what I have observed under Windows 8 on my Thinkpad T440s laptop. I retested several times in Clear under Gnome (Xorg session), and then several times more on my daily driver installed openSUSE Tumbleweed system with KDE Plasma (Xorg) and Openbox, and then I confirmed the excess CPU usage with a Tumbleweed live USB running Gnome on Xorg and Wayland. I'm attaching a tarball of all my findings, since there are a lot of files. The filenames describe what OS and what applications are running. The Zoom test was with a simple 2 user meeting with first video and then screensharing. The Jitsi test was performed with just 2 users with video enabled on a fresh Firefox profile. I'm attaching Firefox's support output and Zoom's terminal output, as well as the loaded kernel modules. I'm also attaching the hwinfo for my Thinkpad T530, but I don't think it's particularly relevant because I have observed the same CPU loads with the same apps on all the other laptops I own running Linux. Please let me know if you need any other information, I'd be glad to help troubleshoot. I'm not really an expert on the graphics stack in Linux, but I have tried to follow the Arch Wiki guidelines for enabling VA-API, and I've tried tons of options in about:config for Firefox on my installed openSUSE TW system. I'm sure it has packages installed that aren't present on the TW live Gnome system I booted, which is probably the reason for the differences in CPU load and temperature between the two systems. But both are drastically worse than Clear Linux straight out-of-the-box. Any ideas on what Clear Linux is doing differently? Is it just the result of thousands of little tweaks and optimizations, or is there some major configuration or compile flag in the graphics stack that Clear is using that could be applied to Tumbleweed? Thanks a lot for the help. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[kernel-bugs] Your Bugzilla bug list needs attention.
by bugzilla_noreply＠suse.com 14 Jun '20

14 Jun '20

[This e-mail has been automatically generated.] You have one or more bugs assigned to you in the Bugzilla bug tracking system (http://bugzilla.suse.com/) that require attention. All of these bugs are in either the CONFIRMED, NEW, or REOPENED state, and have not been touched in 7 days or more. You need to take a look at them, and decide on an initial action. Generally, this means one of three things: (1) You decide this bug is really quick to deal with (like, it's INVALID), and so you get rid of it immediately. (2) You decide the bug doesn't belong to you, and you reassign it to someone else. (Hint: if you don't know who to reassign it to, make sure that the Component field seems reasonable, and then use the "Reset Assignee to default" option.) (3) You decide the bug belongs to you, but you can't solve it this moment. Ignore this email until you are actively working on this bug, when you should set the status to IN_PROGRESS. To get a list of all affected bugs, you can use this URL (bookmark it if you like!): http://bugzilla.suse.com/buglist.cgi?bug_status=CONFIRMED&bug_status=NEW&bu… Or, you can use the general query page, at http://bugzilla.suse.com/query.cgi Appended below are the individual URLs to get to all of your affected bugs that haven't been touched for 7 days or more. You will get this message once a week until you've dealt with these bugs! Harmonize kernel modules in JeOS leap 15.1 with TW and leap 15.2 -> http://bugzilla.suse.com/show_bug.cgi?id=1166342 test bug for assignee change -> http://bugzilla.suse.com/show_bug.cgi?id=1172181 Support for 64-bot processors on motherboards with 32-bit UEFI -> http://bugzilla.suse.com/show_bug.cgi?id=1172292 usb message shown on console even with "quiet splash=silent" -> http://bugzilla.suse.com/show_bug.cgi?id=1172322 -- To unsubscribe, e-mail: kernel-bugs+unsubscribe(a)opensuse.org To contact the owner, e-mail: kernel-bugs+owner(a)opensuse.org

1 0

[kernel-bugs] [Bug 1172886] New: Kernel 4.12.14-lp151.28.52-default is unable to start on some hardware
by bugzilla_noreply＠suse.com 14 Jun '20

14 Jun '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1172886 Bug ID: 1172886 Summary: Kernel 4.12.14-lp151.28.52-default is unable to start on some hardware Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.1 Hardware: Other OS: Other Status: NEW Severity: Critical Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: ae(a)ae-online.de QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created attachment 838763 --> http://bugzilla.opensuse.org/attachment.cgi?id=838763&action=edit Screenshot of Kernelpanic Kernelpanic with Linux mail 4.12.14-lp151.28.52-default #1 SMP Wed Jun 10 15:32:08 UTC 2020 (464fb5f) x86_64 x86_64 x86_64 GNU/Linux Kernel Linux mail 4.12.14-lp151.28.48-default #1 SMP Fri Apr 17 05:38:36 UTC 2020 (18849d1) x86_64 x86_64 x86_64 GNU/Linux works fine. I can only add a picture from the root server. -- You are receiving this mail because: You are the assignee for the bug.

1 6

[kernel-bugs] [Bug 1172741] perf fails to build on aarch64 and armv7/6
by bugzilla_noreply＠suse.com 12 Jun '20

12 Jun '20

https://bugzilla.suse.com/show_bug.cgi?id=1172741 Tony Jones <tonyj(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Assignee|kernel-bugs(a)opensuse.org |tonyj(a)suse.com -- You are receiving this mail because: You are the assignee for the bug.

1 0

[kernel-bugs] [Bug 1172741] perf fails to build on aarch64 and armv7/6
by bugzilla_noreply＠suse.com 12 Jun '20

12 Jun '20

https://bugzilla.suse.com/show_bug.cgi?id=1172741 https://bugzilla.suse.com/show_bug.cgi?id=1172741#c3 --- Comment #3 from Tony Jones <tonyj(a)suse.com> --- (In reply to Takashi Iwai from comment #2) > Pushed the fix to master/for-next branch. Wrong. We don't collect perf patches in the kernel tree. Please revert and leave perf stuff to me. Thanks! -- You are receiving this mail because: You are the assignee for the bug.

1 0

[kernel-bugs] [Bug 1172741] perf fails to build on aarch64 and armv7/6
by bugzilla_noreply＠suse.com 12 Jun '20

12 Jun '20

https://bugzilla.suse.com/show_bug.cgi?id=1172741 https://bugzilla.suse.com/show_bug.cgi?id=1172741#c2 --- Comment #2 from Takashi Iwai <tiwai(a)suse.com> --- Pushed the fix to master/for-next branch. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[kernel-bugs] [Bug 1172856] New: ucode-intel 20200602 hangs on 06-4e-03
by bugzilla_noreply＠suse.com 12 Jun '20

12 Jun '20

https://bugzilla.suse.com/show_bug.cgi?id=1172856 Bug ID: 1172856 Summary: ucode-intel 20200602 hangs on 06-4e-03 Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.1 Hardware: x86-64 URL: https://github.com/intel/Intel-Linux-Processor-Microco de-Data-Files/issues/31 OS: Linux Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: ohering(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- New microcode ucode-intel 20200602-lp151.2.24.1 hangs hard on 06-4e-03. workaround: zypper in --oldpackage ucode-intel-20191115-lp151.2.21.1 DMI: Dell Inc. Latitude E7470/0T6HHJ, BIOS 1.22.8 10/08/2019 -- You are receiving this mail because: You are the assignee for the bug.

1 1

[kernel-bugs] [Bug 1172475] New: Random screen flashing after suspend on KDE
by bugzilla_noreply＠suse.com 11 Jun '20

11 Jun '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1172475 Bug ID: 1172475 Summary: Random screen flashing after suspend on KDE Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.2 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: piotr.kusnierz(a)protonmail.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- I have serious problem with my laptop after suspend. Screen is randomly blinking when opening new window or scrolling in KDE with default kernel. Problem not persist in GNOME. It happens only on one of my machines and only after wakeup from suspend. Maybe there os something wrong with refresh rate after wake up? Problem is gone when i update kernel to 5.6, so I think this is a kernel 5.3 bug. My hardware is: Huawei MateBook 13 (i7-8565U, GeForce MX150) -- You are receiving this mail because: You are the assignee for the bug.

1 3

[kernel-bugs] [Bug 1172812] New: Thinkpad X1 Yoga gen 4: Kernel upgrade made microphone disappear
by bugzilla_noreply＠suse.com 11 Jun '20

11 Jun '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1172812 Bug ID: 1172812 Summary: Thinkpad X1 Yoga gen 4: Kernel upgrade made microphone disappear Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: 64bit OS: Other Status: NEW Severity: Major Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: pointedstick(a)zoho.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- I got a new Lenovo ThinkPad X1 Yoga recently and installed TW on it. As of yesterday, with the latest available Kernel, sof-firmware, and PulseAudio 14 (built from source and installed to /usr/local), I had the audio in the following condition: - Working microphone - Working 4-channel audio, albeit without any bass - Unplugged HDMI and DisplayPort audio devices pointlessly showed up in PulseAudio volume control and plasma-pa System Tray applet/KCM After today's Tumbleweed update, The following things improved: - The audio profile in PulseAudio changed to "Analog Surround 4.0 Output" - The unplugged HDMI and DisplayPort audio devices disappeared from PulseAudio volume control and plasma-pa System Tray applet/KCM However the following things regressed: - Microphone no longer appears in PulseAudio volume control and plasma-pa System Tray applet/KCM This is kind of sucky as the device has a nice quad microphone arrangement and now it's just not visible at all. -- You are receiving this mail because: You are the assignee for the bug.

1 3

[kernel-bugs] [Bug 1172741] perf fails to build on aarch64 and armv7/6
by bugzilla_noreply＠suse.com 10 Jun '20

10 Jun '20

http://bugzilla.suse.com/show_bug.cgi?id=1172741 http://bugzilla.suse.com/show_bug.cgi?id=1172741#c1 Takashi Iwai <tiwai(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |jslaby(a)suse.com, | |mkubecek(a)suse.com, | |tiwai(a)suse.com --- Comment #1 from Takashi Iwai <tiwai(a)suse.com> --- Landed in Linus tree, the commit 168200b6d6ea0cb5765943ec5da5b8149701f36a perf cs-etm: Move definition of 'traceid_list' global variable from header file -- You are receiving this mail because: You are the assignee for the bug.

1 0

[kernel-bugs] [Bug 1172741] New: perf fails to build on aarch64 and armv7/6
by bugzilla_noreply＠suse.com 09 Jun '20

09 Jun '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1172741 Bug ID: 1172741 Summary: perf fails to build on aarch64 and armv7/6 Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: aarch64 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: guillaume.gardet(a)arm.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- perf fails to build on aarch64 and armv7/6 due to: ********** [ 652s] ld: arch/perf-in.o:/home/abuild/rpmbuild/BUILD/tools/perf/util/include/../../util/cs-etm.h:118: multiple definition of `traceid_list'; util/perf-in.o:/home/abuild/rpmbuild/BUILD/tools/perf/util/cs-etm.h:118: first defined here ********** Likely fixed by: https://lkml.org/lkml/2020/5/5/497 -- You are receiving this mail because: You are the assignee for the bug.

1 0

[kernel-bugs] [Bug 1172699] [Staging] Kernel 5.7 breaks test suite of tar and libarchive
by bugzilla_noreply＠suse.com 09 Jun '20

09 Jun '20

http://bugzilla.suse.com/show_bug.cgi?id=1172699 http://bugzilla.suse.com/show_bug.cgi?id=1172699#c2 Jiri Slaby <jslaby(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |IN_PROGRESS Hardware|x86-64 |i686 Assignee|kernel-bugs(a)opensuse.org |jslaby(a)suse.com --- Comment #2 from Jiri Slaby <jslaby(a)suse.com> --- (In reply to Jiri Slaby from comment #1) > Happens on x86_64 too. Switching to that as it's more common. I am wrong here. osc build takes the last arch used, so I repeated an i586 build, x86_64 looks to be unaffected. And it explains the irreproducibility above. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[kernel-bugs] [Bug 1172699] [Staging] Kernel 5.7 breaks test suite of tar and libarchive
by bugzilla_noreply＠suse.com 09 Jun '20

09 Jun '20

http://bugzilla.suse.com/show_bug.cgi?id=1172699 http://bugzilla.suse.com/show_bug.cgi?id=1172699#c1 Jiri Slaby <jslaby(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Hardware|i586 |x86-64 --- Comment #1 from Jiri Slaby <jslaby(a)suse.com> --- Hm, it's some setup thing. While it reproduces in osc shell environment, I cannot reproduce in a VM with that kernel installed, nor with a compiled kernel. Happens on x86_64 too. Switching to that as it's more common. I really love these issues. To be continued. What happens is that tar'ing of a sparse 8G file (512B at the end) creates a proper archive. Untar'ing (using xvf) creates a zeroed 512B file with the bad kernel (5.7). Good kernel untars to a proper 8G file, indeed. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[kernel-bugs] [Bug 1172699] New: [Staging] Kernel 5.7 breaks test suite of tar and libarchive
by bugzilla_noreply＠suse.com 09 Jun '20

09 Jun '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1172699 Bug ID: 1172699 Summary: [Staging] Kernel 5.7 breaks test suite of tar and libarchive Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: i586 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: dimstar(a)opensuse.org QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Staging:B contains kernel 5.7 If the obs worker VM is built up using kernel-obs-build 5.7, then I see build failures in at least * apr * libarchive * tar failing their test suites. from libarchive: >[ 305s] 445/692 Test #448: libarchive_test_sparse_basic .............................................***Failed 0.02 sec >[ 305s] >[ 305s] If tests fail or crash, details will be in: >[ 305s] /tmp/libarchive_test.2020-06-08T22.51.32-000 >[ 305s] >[ 305s] Reference files will be read from: /home/abuild/rpmbuild/BUILD/libarchive-3.4.3/libarchive/test >[ 305s] Exercising: libarchive 3.4.3 zlib/1.2.11 liblzma/5.2.5 bz2lib/1.0.8 liblz4/1.9.2 libzstd/1.4.5 >[ 305s] 447: test_sparse_basic >[ 305s] ../libarchive/test/test_sparse_basic.c:431: expected_offset != archive_entry_size(ae) >[ 305s] expected_offset=4563410944 (0x110002000, 042000020000) >[ 305s] archive_entry_size(ae)=3221233664 (0xc0002000, 030000020000) >[ 305s] ../libarchive/test/test_sparse_basic.c:434: holes_seen != expected_holes >[ 305s] Description: file4 >[ 305s] holes_seen=1 (0x1, 01) >[ 305s] expected_holes=2 (0x2, 02) Tar also fails in context of sparse files > 8GB apr lists something like this: >[ 345s] Headers (3): >[ 345s] 15 bytes (1) >[ 345s] 5 bytes (E) >[ 345s] 80000 bytes (^) >[ 345s] File: 200000 bytes from offset 0 >[ 345s] Trailers (3): >[ 345s] 19 bytes >[ 345s] 10 bytes >[ 345s] 90000 bytes >[ 345s] apr_socket_sendfile()->0, sent 370049 bytes >[ 345s] After apr_socket_sendfile(), the kernel file pointer is at offset 0. >[ 345s] client: apr_socket_sendfile() worked as expected! -- You are receiving this mail because: You are the assignee for the bug.

1 0

[kernel-bugs] [Bug 1172670] New: kdump: fails to create dump as dump-capture kernel boots into systemd emergency mode
by bugzilla_noreply＠suse.com 08 Jun '20

08 Jun '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1172670 Bug ID: 1172670 Summary: kdump: fails to create dump as dump-capture kernel boots into systemd emergency mode Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: shung-hsi.yu(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created attachment 838585 --> http://bugzilla.opensuse.org/attachment.cgi?id=838585&action=edit journalctl output (colored) The system is configured to capture core dump on crash with `yast2 kdump`. This is confirmed by looking at /proc/cmdline (contains ' crashkernel=256M,high crashkernel=72M,low'), output of `dmesg`, and the status of kdump.service. Triggering a crash dump manually with `echo c >/proc/sysrq-trigger` shows the stacktrace, but fails to correctly boot up the dump-capturing kernel. Below is an excerpt of the output of `journalctl` before the emergency shell was started. Jun 08 14:13:35 localhost systemd[1]: Starting Switch Root... Jun 08 14:13:35 localhost systemctl[377]: Failed to switch root: Specified switch root path '/sysroot' does not seem to be an OS tree. os-release file is missing. Jun 08 14:13:35 localhost systemd[1]: initrd-switch-root.service: Main process exited, code=exited, status=1/FAILURE Jun 08 14:13:35 localhost systemd[1]: initrd-switch-root.service: Failed with result 'exit-code'. Jun 08 14:13:35 localhost systemd[1]: Failed to start Switch Root. Jun 08 14:13:35 localhost systemd[1]: initrd-switch-root.service: Triggering OnFailure= d ependencies. Jun 08 14:13:35 localhost systemd[1]: Starting Setup Virtual Console... Jun 08 14:13:35 localhost systemd[1]: Finished Setup Virtual Console. Jun 08 14:13:35 localhost systemd[1]: Started Emergency Shell. Jun 08 14:13:35 localhost systemd[1]: Reached target Emergency Mode. This issue looks a bit similar to https://bugzilla.redhat.com/show_bug.cgi?id=1812393 but I'm not too sure. -- You are receiving this mail because: You are the assignee for the bug.

1 4

[kernel-bugs] [Bug 1172541] Mysterious crashes with kernel 5.6.14
by bugzilla_noreply＠suse.com 08 Jun '20

08 Jun '20

http://bugzilla.suse.com/show_bug.cgi?id=1172541 http://bugzilla.suse.com/show_bug.cgi?id=1172541#c3 --- Comment #3 from Takashi Iwai <tiwai(a)suse.com> --- OK, then let's wait until 5.7 kernel gets merged to TW snapshot. -- You are receiving this mail because: You are the assignee for the bug.

1 0