February 2021 - openSUSE Kernel Bugs - openSUSE Mailing Lists

[Bug 1180985] New: Kernel 5.10 breaks ethernet connection with lenovo x390
by bugzilla_noreply＠suse.com 30 Sep '22

30 Sep '22

https://bugzilla.suse.com/show_bug.cgi?id=1180985 Bug ID: 1180985 Summary: Kernel 5.10 breaks ethernet connection with lenovo x390 Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: fcastelli(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- I have a lenovo x390 laptop with an intel CPU. I've been running Tumbleweed on it since a while because I needed a newer kernel compared to Leap to get my network card to work. Everything worked fine since I upgraded to 5.10.x. The upgrade caused the ethernet card to became unreliable (like it happened with old Leap 15.1 kernel). The network card works fine for some time, then it suddenly loses the connection. I can see Gnome NetworkManager trying to setup the card, but the process never ends. The x390 doesn't have a physical eth port, it has a proprietary adapter that provides that to the laptop. This adapter is plagued by the issue. The same issue happens when I connect the computer to its USB-C docking station (an official one provided by Lenovo). The docking station provides an eth port which is affected by this issue. The 5.9.14-1.2 and the 5.9.12-1.1 kernels are the last kernels I tested on my computer that proved to be fine. I'll try to collect more detailed logs from syslog, but right now it's a bit hard for me because I cannot reproduce the issue. I just have to wait for it to happen... -- You are receiving this mail because: You are the assignee for the bug.

1 17

[Bug 1180591] New: Display backlight stuck at 100%
by bugzilla_noreply＠suse.com 08 Aug '22

08 Aug '22

http://bugzilla.opensuse.org/show_bug.cgi?id=1180591 Bug ID: 1180591 Summary: Display backlight stuck at 100% Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: x86-64 OS: openSUSE Tumbleweed Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: maurizio.galli(a)gmail.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created attachment 844855 --> http://bugzilla.opensuse.org/attachment.cgi?id=844855&action=edit system information I have just upgraded my device to Tumbleweed and now backlight brightness is stuck at 100% with no way to change it. I have tried several methods, including xbacklight and Xfce settings. Backlight control used to work fine with Kernel 5.3 shipped by Leap. I found a recent report using similar hardware that could suggest a regression in the kernel: https://discuss.getsol.us/d/6039-brightness-control-not-working-on-apple-di… I attached information about my system but please let me know what else I can provide. -- You are receiving this mail because: You are the assignee for the bug.

1 24

[kernel-bugs] [Bug 1174622] New: System not reconnecting to WLAN after suspend/resume
by bugzilla_noreply＠suse.com 22 Jul '22

22 Jul '22

https://bugzilla.suse.com/show_bug.cgi?id=1174622 Bug ID: 1174622 Summary: System not reconnecting to WLAN after suspend/resume Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.2 Hardware: x86-64 OS: SUSE Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: holgi(a)suse.com QA Contact: qa-bugs(a)suse.de CC: tiwai(a)suse.com Found By: Development Blocker: --- Created attachment 840122 --> https://bugzilla.suse.com/attachment.cgi?id=840122&action=edit Output of hwinfo --netcard System with NetworkManger is connected to a wifi network. After suspend and resume later, it is not able to reconnect to the same wifi network. After a reboot, system is connecting to the same wifi network without any problems. -- You are receiving this mail because: You are the assignee for the bug.

1 27

[kernel-bugs] [Bug 1174868] New: Upgrade to LEAP 15.2 makes Thinkpad 480s sometimes completely freezes, 20°C warmer and journal is trimmed
by bugzilla_noreply＠suse.com 20 Jul '22

20 Jul '22

http://bugzilla.opensuse.org/show_bug.cgi?id=1174868 Bug ID: 1174868 Summary: Upgrade to LEAP 15.2 makes Thinkpad 480s sometimes completely freezes, 20°C warmer and journal is trimmed Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.2 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: markus.zimmermann(a)symflower.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- One of our machines here a Thinkpad T480s on openSUSE 15.2 kernel 5.3.18-lp152.33-default. In general this machine was upgraded from LEAP 15.1 to 15.2 and then the problems started to show. The CPU is constantly hotter while working. by 20°C. This machine now freezes sometimes completely. The machine is then - not pingable - no keyboard interaction works - lid close/open does nothng - no mouse interaction works - the notebook is really warm - When a freeze happens also a trim of the journal happens... e.g. we loose the whole journal for the day. - We SSH'ed into the machine and watched via "htop", "journal -f" and "sensors". WHen the machine freezes, there is no significant load via htop seeable, there are no interesting logs in journal and sensors shows that it is simply hotter. Interestingly, we upgraded another machine before (also a Thinkpad T480s) and this does not have any problems. We are btw on the latest firmwares using fwupdmgr. What should we try? How can we debug it? -- You are receiving this mail because: You are the assignee for the bug.

1 20

[kernel-bugs] [Bug 1177800] New: [Ten64] getsysinfo caused kernel error (synchronous external abort)
by bugzilla_noreply＠suse.com 08 Jul '22

08 Jul '22

http://bugzilla.opensuse.org/show_bug.cgi?id=1177800 Bug ID: 1177800 Summary: [Ten64] getsysinfo caused kernel error (synchronous external abort) Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: aarch64 OS: openSUSE Tumbleweed Status: NEW Severity: Major Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: afaerber(a)suse.com QA Contact: qa-bugs(a)suse.de CC: matt(a)traverse.com.au, snwint(a)suse.com, yousaf.kaukab(a)suse.com Found By: --- Blocker: --- Running `getsysinfo` (via ssh) on Tumbleweed 20201011 with kernel-default 5.9.0 from Kernel:HEAD repository caused a kernel error, with ssh getting stuck and reconnections failing. Serial login still worked. zehn:~ # getsysinfo /proc/bus/input /proc/cpuinfo /proc/device-tree /proc/devices /proc/fb /proc/filesystems /proc/interrupts /proc/iomem /proc/ioports /proc/meminfo /proc/modules /proc/net/dev /proc/partitions /proc/scsi /proc/tty /proc/version /sys /usr/sbin/getsysinfo: line 23: 2761 Segmentation fault cp -x -a --parents "$i" "$dir/$host" 2> /dev/null /var/lib/hardware/udi /proc/mounts System data written to: /tmp/zehn.tar.gz zehn:~ # [ 544.956478] Internal error: synchronous external abort: 96000210 [#1] SMP [ 544.963295] Modules linked in: af_packet ip6t_REJECT nf_reject_ipv6 ip6t_rpfilter xt_tcpudp ipt_REJECT nf_reject_ipv4 xt_conntrack ebtable_nat ebtable_broute ip6table_nat ip6table_mangle ip6table_raw ip6table_security iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_mangle iptable_raw iptable_security iscsi_ibft iscsi_boot_sysfs ip_set nfnetlink ebtable_filter ebtables rfkill ip6table_filter ip6_tables iptable_filter ip_tables x_tables fsl_dpaa2_ptp ptp_qoriq fsl_dpaa2_eth phylink xgmac_mdio hid_generic fsl_mc_dpio usbhid cdc_acm i2c_mux_pca954x i2c_mux tpm_i2c_atmel spi_fsl_qspi qoriq_thermal leds_gpio optee tee uio_pdrv_genirq uio qoriq_cpufreq nls_iso8859_1 nls_cp437 vfat fat drm xhci_plat_hcd xhci_hcd usbcore caam_jr mmc_block libdes authenc caamhash_desc caamalg_desc crypto_engine rtc_ds1307 mp886x aes_ce_blk crypto_simd cryptd aes_ce_cipher crct10dif_ce ghash_ce sha2_ce sha256_arm64 sha1_ce dpaa2_console nvme nvme_core dwc3 sdhci_of_esdhc caam sdhci_pltfm ulpi [ 544.963547] error sdhci udc_core roles mmc_core i2c_imx btrfs blake2b_generic libcrc32c xor xor_neon raid6_pq sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua [ 545.066303] CPU: 0 PID: 2761 Comm: cp Not tainted 5.9.0-1.g11733e1-default #1 openSUSE Tumbleweed (unreleased) [ 545.076303] Hardware name: traverse ten64/ten64, BIOS 2020.07-rc1-g1d4a3d9d5c 07/28/2020 [ 545.084393] pstate: 60000085 (nZCv daIf -PAN -UAO BTYPE=--) [ 545.089967] pc : dw_pcie_read+0x48/0xc0 [ 545.093799] lr : dw_pcie_access_other_conf.isra.0+0xc4/0x120 [ 545.099452] sp : ffff800012203bf0 [ 545.102759] x29: ffff800012203bf0 x28: 0000000000000400 [ 545.108067] x27: ffff00833e683400 x26: ffff008348240000 [ 545.113375] x25: ffff800010085000 x24: 0000000000000000 [ 545.118683] x23: ffff00834b239880 x22: ffff800012203cc4 [ 545.123991] x21: 0000000000000004 x20: 0000000000000400 [ 545.129299] x19: ffff00834b2398a8 x18: 0000000000000000 [ 545.134607] x17: 0000000000000000 x16: ffffafadaf1be170 [ 545.139915] x15: 0000000000000000 x14: 0000000000000000 [ 545.145222] x13: 0000000000000000 x12: 0000000000000040 [ 545.150530] x11: ffff00834bd8c920 x10: 0000000000000000 [ 545.155837] x9 : ffffafadaf12e8f4 x8 : 0000000002080000 [ 545.161145] x7 : 0000000000000000 x6 : ffff800010f00000 [ 545.166452] x5 : 0000000000000000 x4 : 0000000000000908 [ 545.171759] x3 : 0000000000000003 x2 : ffff800012203cc4 [ 545.177066] x1 : 0000000000000004 x0 : ffff800010085400 [ 545.182374] Call trace: [ 545.184816] dw_pcie_read+0x48/0xc0 [ 545.188298] dw_pcie_rd_conf+0x11c/0x150 [ 545.192217] pci_user_read_config_dword+0xa8/0x190 [ 545.197004] pci_read_config+0x1f8/0x264 [ 545.200923] sysfs_kf_bin_read+0x78/0xa0 [ 545.204840] kernfs_file_direct_read+0x90/0x220 [ 545.209365] kernfs_fop_read+0x44/0x50 [ 545.213111] vfs_read+0xb8/0x1e4 [ 545.216334] ksys_read+0x78/0x110 [ 545.219643] __arm64_sys_read+0x28/0x34 [ 545.223476] el0_svc_common.constprop.0+0x84/0x230 [ 545.228261] do_el0_svc+0x30/0xa0 [ 545.231572] el0_svc+0x18/0x50 [ 545.234621] el0_sync_handler+0x90/0x254 [ 545.238538] el0_sync+0x158/0x180 [ 545.241849] Code: 528010e0 d50323bf b900005f d65f03c0 (b9400001) [ 545.247941] ---[ end trace 68383e7eecaae870 ]--- -- You are receiving this mail because: You are the assignee for the bug.

1 5

[kernel-bugs] [Bug 1177288] New: Raspberry pi3 (model b) crashes with network gadget
by bugzilla_noreply＠suse.com 03 Jul '22

03 Jul '22

http://bugzilla.opensuse.org/show_bug.cgi?id=1177288 Bug ID: 1177288 Summary: Raspberry pi3 (model b) crashes with network gadget Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.2 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: coolo(a)suse.com QA Contact: qa-bugs(a)suse.de CC: guillaume.gardet(a)arm.com, nsaenzjulienne(a)suse.com Found By: --- Blocker: --- I use the official Leap 15.2 Jeos image on a pi3b and have a USB network device attached to it (a very special one, https://www.fibrecode.com/fc602-usb-oabr-broadr-reach-100base-t1-stick.html) and it crashes the kernel pretty reliably with the following crash dump. [ 86.184109] usb 1-1.3: USB disconnect, device number 5 [ 86.184427] cdc_ether 1-1.3:1.0 eth2: unregister 'cdc_ether' usb-3f980000.usb-1.3, CDC Ethernet Device [ 99.795717] usb 1-1.3: new high-speed USB device number 7 using dwc2 [ 99.926758] usb 1-1.3: New USB device found, idVendor=152a, idProduct=857b, bcdDevice= 2.24 [ 99.926780] usb 1-1.3: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 99.926788] usb 1-1.3: Product: FibreCode FC602 Stick [ 99.926796] usb 1-1.3: Manufacturer: FibreCode [ 99.926804] usb 1-1.3: SerialNumber: FC01330000018a69 [ 99.930380] cdc_ether 1-1.3:1.0 eth1: register 'cdc_ether' at usb-3f980000.usb-1.3, CDC Ethernet Device, fc:c2:3d:1f:7f:ad [ 99.949857] cdc_ether 1-1.3:1.0 eth2: renamed from eth1 [ 740.880346] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 7 - ChHltd set, but reason is unknown [ 740.880360] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04400001 [ 741.461843] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 1 - ChHltd set, but reason is unknown [ 741.461858] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x06400001 [ 741.880374] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 5 - ChHltd set, but reason is unknown [ 741.880386] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04400001 [ 741.880395] dwc2 3f980000.usb: dwc2_update_urb_state_abn(): trimming xfer length [ 741.880573] WARNING: CPU: 0 PID: 0 at ../drivers/usb/dwc2/hcd.c:2683 dwc2_assign_and_init_hc+0x664/0xa10 [dwc2] [ 741.880578] Modules linked in: af_packet iscsi_ibft iscsi_boot_sysfs vc4 drm_kms_helper drm btsdio snd_soc_core bluetooth snd_compress snd_bcm2835(C) nls_iso8859_1 ac97_bus nls_cp437 snd_pcm_dmaengine ecdh_generic snd_pcm bcm2835_v4l2(C) ecc vfat v4l2_common snd_timer fat videobuf2_vmalloc brcmfmac videobuf2_memops videobuf2_v4l2 snd videobuf2_common videodev mc brcmutil cpufreq_dt soundcore fb_sys_fops cfg80211 syscopyarea sysfillrect microchip sysimgblt rfkill ftdi_sio cdc_ether usbnet lan78xx usbserial mii raspberrypi_hwmon bcm2835_thermal raspberrypi_cpufreq vchiq(C) bcm2835_rng bcm2835_wdt crct10dif_ce uio_pdrv_genirq uio leds_gpio ext4 mbcache jbd2 mmc_block dwc2 udc_core usbcore sdhci_iproc sdhci_pltfm sdhci bcm2835 gpio_raspberrypi_exp mmc_core clk_raspberrypi i2c_bcm2835 bcm2835_dma fixed phy_generic dm_mirror dm_region_hash dm_log sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_mod efivarfs [ 741.880754] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G C 5.3.18-lp152.36-default #1 openSUSE Leap 15.2 (unreleased) [ 741.880759] Hardware name: raspberrypi rpi/rpi, BIOS 2020.01 06/02/2020 [ 741.880765] pstate: 60000085 (nZCv daIf -PAN -UAO) [ 741.880799] pc : dwc2_assign_and_init_hc+0x664/0xa10 [dwc2] [ 741.880834] lr : dwc2_hcd_select_transactions+0x104/0x1a0 [dwc2] [ 741.880838] sp : ffff000010003c60 [ 741.880842] x29: ffff000010003c60 x28: ffff3bd997683dc0 [ 741.880849] x27: ffffa6ec7c4c4000 x26: ffff3bd997679000 [ 741.880857] x25: 0000000000000008 x24: ffffa6ec7c6a55e0 [ 741.880864] x23: ffffa6ec6bbc5080 x22: ffffa6ec77d12830 [ 741.880871] x21: ffffa6ec79871600 x20: ffffa6ec7c6a5080 [ 741.880878] x19: ffffa6ec6bbc50c8 x18: ffffffffffffffff [ 741.880885] x17: 0000000000000001 x16: 0000000000000007 [ 741.880891] x15: ffff3bd997679708 x14: ffff3bd9978cfa28 [ 741.880898] x13: ffff3bd9978cf67e x12: ffff3bd9976a2000 [ 741.880905] x11: 0000000000000000 x10: ffff3bd9978ce000 [ 741.880912] x9 : 0000000000000000 x8 : 0000000000000003 [ 741.880919] x7 : 0000000000000176 x6 : ffff3bd9978cec90 [ 741.880925] x5 : 0000000000000001 x4 : ffffa6ec79871698 [ 741.880932] x3 : 0000000000000000 x2 : 00000000000005ee [ 741.880939] x1 : 0000000000000000 x0 : 0000000000000002 [ 741.880946] Call trace: [ 741.880984] dwc2_assign_and_init_hc+0x664/0xa10 [dwc2] [ 741.881018] dwc2_hcd_select_transactions+0x104/0x1a0 [dwc2] [ 741.881052] dwc2_release_channel+0xfc/0x280 [dwc2] [ 741.881087] dwc2_halt_channel+0xac/0x158 [dwc2] [ 741.881121] dwc2_hc_n_intr+0x860/0x8c0 [dwc2] [ 741.881155] dwc2_handle_hcd_intr+0x38c/0x450 [dwc2] [ 741.881188] _dwc2_hcd_irq+0x20/0x30 [dwc2] [ 741.881278] usb_hcd_irq+0x3c/0x60 [usbcore] [ 741.881291] __handle_irq_event_percpu+0x74/0x268 [ 741.881299] handle_irq_event_percpu+0x40/0x98 [ 741.881307] handle_irq_event+0x50/0xa8 [ 741.881314] handle_level_irq+0xd4/0x178 [ 741.881321] generic_handle_irq+0x34/0x50 [ 741.881332] bcm2836_chained_handle_irq+0x4c/0x70 [ 741.881339] generic_handle_irq+0x34/0x50 [ 741.881346] __handle_domain_irq+0x68/0xc0 [ 741.881354] bcm2836_arm_irqchip_handle_irq+0x78/0xe0 [ 741.881360] el1_irq+0xcc/0x180 [ 741.881369] arch_cpu_idle+0x40/0x1c0 [ 741.881377] default_idle_call+0x24/0x44 [ 741.881385] do_idle+0x1dc/0x2c0 [ 741.881392] cpu_startup_entry+0x28/0x30 [ 741.881400] rest_init+0xc4/0xd0 [ 741.881409] arch_call_rest_init+0x14/0x1c [ 741.881414] start_kernel+0x4e8/0x51c [ 741.881419] ---[ end trace 29007ab7897c5716 ]--- [ 742.880425] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 7 - ChHltd set, but reason is unknown [ 742.880437] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001 [ 742.880445] dwc2 3f980000.usb: dwc2_update_urb_state_abn(): trimming xfer length [ 743.880453] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 3 - ChHltd set, but reason is unknown [ 743.880465] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001 [ 743.880474] dwc2 3f980000.usb: dwc2_update_urb_state_abn(): trimming xfer length [ 744.880491] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 4 - ChHltd set, but reason is unknown [ 744.880505] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001 [ 744.880514] dwc2 3f980000.usb: dwc2_update_urb_state_abn(): trimming xfer length [ 745.880537] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 6 - ChHltd set, but reason is unknown [ 745.880549] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001 [ 745.880557] dwc2 3f980000.usb: dwc2_update_urb_state_abn(): trimming xfer length [ 746.880564] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 5 - ChHltd set, but reason is unknown [ 746.880576] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001 [ 746.880585] dwc2 3f980000.usb: dwc2_update_urb_state_abn(): trimming xfer length [ 747.880601] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 1 - ChHltd set, but reason is unknown [ 747.880612] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001 [ 747.880621] dwc2 3f980000.usb: dwc2_update_urb_state_abn(): trimming xfer length [ 748.880641] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 6 - ChHltd set, but reason is unknown [ 748.880654] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600009 [ 748.880664] dwc2 3f980000.usb: dwc2_update_urb_state_abn(): trimming xfer length [ 749.880675] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 1 - ChHltd set, but reason is unknown [ 749.880686] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001 [ 749.880695] dwc2 3f980000.usb: dwc2_update_urb_state_abn(): trimming xfer length [ 750.880718] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 4 - ChHltd set, but reason is unknown -- You are receiving this mail because: You are the assignee for the bug.

1 5

[Bug 1180316] New: [Build 20201222] openQA test fails in kdump_and_crash
by bugzilla_noreply＠suse.com 15 Mar '22

15 Mar '22

http://bugzilla.opensuse.org/show_bug.cgi?id=1180316 Bug ID: 1180316 Summary: [Build 20201222] openQA test fails in kdump_and_crash Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other URL: https://openqa.opensuse.org/tests/1523048/modules/kdum p_and_crash/steps/58 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: dimstar(a)opensuse.org QA Contact: qa-bugs(a)suse.de Found By: openQA Blocker: Yes ## Observation openQA test in scenario opensuse-Tumbleweed-JeOS-for-kvm-and-xen-x86_64-jeos-extra@64bit_virtio-2G fails in [kdump_and_crash](https://openqa.opensuse.org/tests/1523048/modules/kdump_an… After the update to kernel 5.10, kdump_and_crash fails crash: cannot determine length of symbol: log_end ## Test suite description Same as jeos, plus some more tests. ## Reproducible Fails since (at least) Build [20190311](https://openqa.opensuse.org/tests/877894) ## Expected result Last good: (unknown) (or more recent) ## Further details Always latest result in this scenario: [latest](https://openqa.opensuse.org/tests/latest?arch=x86_64&distri=opensus… -- You are receiving this mail because: You are the assignee for the bug.

1 2

[kernel-bugs] [Bug 1177624] New: watchdog: BUG: soft lockup - CPU#16 stuck for 23s! [qemu-system-aar:4554]
by bugzilla_noreply＠suse.com 08 Mar '22

08 Mar '22

http://bugzilla.opensuse.org/show_bug.cgi?id=1177624 Bug ID: 1177624 Summary: watchdog: BUG: soft lockup - CPU#16 stuck for 23s! [qemu-system-aar:4554] Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.2 Hardware: aarch64 OS: Other Status: NEW Severity: Major Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: guillaume.gardet(a)arm.com QA Contact: qa-bugs(a)suse.de CC: afaerber(a)suse.com, dmueller(a)suse.com Found By: --- Blocker: --- Created attachment 842562 --> http://bugzilla.opensuse.org/attachment.cgi?id=842562&action=edit dmesg.log The D05 machine used as a worker for openqa.opensuse.org have been upgraded from Leap 15.1 to Leap 15.2 and shows lots of performance problems. Lots of mistyping in qemu, few screen corruptions. Checking the kernel log (in attachment), we can see some traces related to the watchdog. -- You are receiving this mail because: You are the assignee for the bug.

1 5

[Bug 1182304] New: Integrated USB3 port / hub only works with AC adapter connected
by bugzilla_noreply＠suse.com 01 Mar '22

01 Mar '22

http://bugzilla.opensuse.org/show_bug.cgi?id=1182304 Bug ID: 1182304 Summary: Integrated USB3 port / hub only works with AC adapter connected Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: x86-64 OS: openSUSE Tumbleweed Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: rs.opensuse(a)spitzenpfeil.org QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Kernel: 5.10.12-1-default Yet again I'm having issues with my laptops integrated USB3 port / hub. One of the USB-3 + USB-C ports only works with the AC adapter plugged in. Pulling the plug with devices connected leads to stuckage. Same hardware as in: https://bugzilla.opensuse.org/show_bug.cgi?id=1167146 -- You are receiving this mail because: You are the assignee for the bug.

1 8

[Bug 1180742] New: [amdgpu]An AMD Vega series GPU randomly crashes
by bugzilla_noreply＠suse.com 28 Feb '22

28 Feb '22

http://bugzilla.opensuse.org/show_bug.cgi?id=1180742 Bug ID: 1180742 Summary: [amdgpu]An AMD Vega series GPU randomly crashes Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.2 Hardware: x86-64 OS: openSUSE Leap 15.2 Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: srid(a)rkmail.ru QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created attachment 844970 --> http://bugzilla.opensuse.org/attachment.cgi?id=844970&action=edit partial kernel log The AMDGPU kernel driver randomly crashes GPU, usually under load, with Radeon VII hardware. The GPU hang is relatively hard to hit, as it usually takes 5 to 7 days before it crashes. After a hang it attempts to reset the GPU, but sometimes the reset fails and system stays sort of unresponsive. You can still access it over network, and there's some sort of reaction on keyboard events, but display stays dead. Also, it seems to bring PCIe bus down to 1.0 mode, and it stays that until reboot. There's an upstream bug open that may have something to do about it: https://gitlab.freedesktop.org/drm/amd/-/issues/716 That particular GPU works fine on Windows machine openSUSE Leap 15.2, kernel 5.3.18-lp152.57-default #1 SMP Fri Dec 4 07:27:58 UTC 2020 (7be5551) -- You are receiving this mail because: You are the assignee for the bug.

1 7

2022

2021

2020

openSUSE Kernel Bugs February 2021