May 2009 - openSUSE Features - openSUSE Mailing Lists

[openFATE 306341] Show developer assigned information
by fate_noreply＠suse.de 26 Oct '10

26 Oct '10

Feature added by: Michael Löffler (michl19) Feature #306341, revision 1, last change by Title: Show developer assigned information openFATE: Unconfirmed Priority Requester: Important Requested by: Michael Löffler (michl19) Description: Currently its not visible for community outside Novell if a developer is set or not. To ease community conribution this information needs to be visible outside the company as well. People then can find features where help is needed much easier and/or a call for contribution can be made. -- openSUSE Feature: https://features.opensuse.org/306341

1 8

[openFate 305312] OpenSUSE <= 11.1 Alpha 2 don't install on SD card
by fate_noreply＠suse.de 06 Oct '10

06 Oct '10

Feature added by: Arvin Schnell <aschnell(a)novell.com> Feature #305312, revision 1, last change by Title: OpenSUSE <= 11.1 Alpha 2 don't install on SD card openSUSE-11.2: New Priority Requester: Important Requested by: Harald Welte <haraldwelte(a)viatech.com> Partner organization: openSUSE.org Description: [Please note that I'm working for the CPU+Chipset maker VIA and this is an actually important feature for the 'netbook' class of devices in the coming months] Recently, BIOS vendors have been starting to implement a 'boot from SD card' feature, much like they have added 'boot from USB memory stick' some years ago. The only SD-card host controller that I've seen this implemented for is SDHCI compliant host controllers. While this is a nice feature to support, for most systems it is just a gimmick and not something neccessarry. However, there are hand-held devices such as netbooks in the pipeline which do not have any other mass storage device. No hard disk and no IDE-attached flash disk or the like. They just have one (more likely two or more) SD card slots and you install and store not only your data but the entire operating system on that SD card. Furthermore, there are products like Samsung moviNAND which are basically a SDcard in a BGA package that can be soldered onto a PCB. So from a protocol and software point of view it is a SD card, but it is mechanically soldered onto the board. Such device have gained some popularity in ARM-based designs, but we'll likely see them in the x86 world, too. To make this happen, The distribution installation initrd needs to 1. include and auto-load the sdhc.ko and sdhci_pci.ko kernel modules 2. create the /dev/mmcblk* device nodes as per udev/hotplug events The actual distribution installation program needs to 1. recognize /dev/mmcblk* as block devices that can be used as target device 2. use a grub-install or similar program that can discover the bios drive number to /dev/mmcblk* device name mapping I have outlined the full details at http://wiki.gpl-devices.org/wiki/Installing_Linux_on_booting_SD_card -- openSUSE Feature: https://features.opensuse.org/?rm=feature_show&id=305312

1 18

[openFate 305706] Facebook chat/Pidgin Integration
by fate_noreply＠suse.de 07 Sep '10

07 Sep '10

Feature added by: Kevin Dupuy (kdupuy9) Feature #305706, revision 1, last change by Title: Facebook chat/Pidgin Integration openSUSE-11.2: Unconfirmed Priority Requester: Desirable Requested by: Kevin Dupuy (kdupuy9) Partner organization: openSUSE.org Description: Facebook is currently the most popular social networking site, and it's chat functionality is being used as an IM client for many people. With pidgin-facebookchat (http://code.google.com/p/pidgin-facebookchat/) , Pidgin seamlessly integrates Facebook friends and chats as it would any other IM service. The plugin is already there, and licensed under the GPLv3 (see website above). -- openSUSE Feature: https://features.opensuse.org/?rm=feature_show&id=305706

1 7

[openFate 305267] Installation using Orca (screen reader) to Improve Accessibility
by fate_noreply＠suse.de 10 Aug '10

10 Aug '10

Feature added by: Lukas Ocilka <locilka(a)novell.com> Feature #305267, revision 1, last change by Title: Installation using Orca (screen reader) to Improve Accessibility openSUSE-11.2: New Priority Requester: Desirable Requested by: Darragh Ó Héiligh <d(a)digitaldarragh.com> Partner organization: openSUSE.org Description: Original title: Accessibility for installation could be automated with better results. Users can currently press F9 at the boot screen to hear the boot options spoken. THis is a fantastic new feature and is one that OpenSuSE is the first to add. For this you should be very proud. However, I would ask that you further build upon this success by recognising that accessibility at the boot menu has been enabled and automatically start the Orca screen reader with also setting gnome accessibility to enabled. One further consideration should be taken into account. To enable Orca to access the installation screen, Orca must be run as root. However, if Orca is run as root, the rest of the desktop is not accessible due to permissioning issues. Therefore, the installation should be run automatically if the f9 key si pressed. Note, a similar feature excluding the accessible boot menu has also been added to Ubuntu 8.04. Note that they also have a key press (F5) to automatically enable assistive technologies for installation on their live CD. References: See bnc #417874 (https://bugzilla.novell.com/show_bug.cgi?id=417874) -- openSUSE Feature: https://features.opensuse.org/?rm=feature_show&id=305267

1 5

[openFate 305589] Checkbox "include user home projects in search"
by fate_noreply＠suse.de 30 Jul '10

30 Jul '10

Feature added by: Pavol Rusnak <prusnak(a)novell.com> Feature #305589, revision 1, last change by Title: Checkbox "include user home projects in search" Buildservice: New Priority Requester: Desirable Requested by: Pavol Rusnak <prusnak(a)novell.com> Partner organization: openSUSE.org Description: Here's one idea to start with: on the search page, have a checkbox labeled "Include user home projects in search" which defaults to OFF. Then at least you have one level of separation (between "official" and home projects) that is clear to both developers and users. And developers will be motivated to move their generally useful packages into an "official" project by the fact that the default checkbox is OFF. http://lists.opensuse.org/opensuse-buildservice/2008-12/msg00088.html -- openSUSE Feature: https://features.opensuse.org/?rm=feature_show&id=305589

1 4

[openFATE 305905] Package and Project Marking
by fate_noreply＠suse.de 02 Jun '10

02 Jun '10

Feature added by: Will Stephenson (wstephenson) Feature #305905, revision 1, last change by Title: Package and Project Marking Buildservice: Unconfirmed Priority Requester: Important Requested by: Will Stephenson (wstephenson) Description: * Add the ability to have a 'status update' on packages AND projects * * status updates are not package changelogs; logs refer to changes to the contents of the package, status updates relate to ongoing work on the packages * * 1:N relationship, status updates are timestamped. Like facebook or $microblogging service. * show current status on checkout or list * Add a command to read all the status updates on a package. Examples: 1) Jack is updating Commodore:Amiga:Workbench:Factory to 23.2 and disables publish on the whole project before the actual release date with the status message '20090224 - disabled publish pending 23.2 release' 2) Jill is triaging breakages in Commodore:Amiga:Workbench:Factory and marks packages without checking them out before assigning work to team members Denise and Paula, with "osc mark -m 'broken by input.device changes' Commodore:Amiga:Workbench:Factory Preferences" 3) Paula is fixing a breakage in Commodore:Amiga:Workbench:Factory Preferences and locks (see #305899) the package with status update using "osc co -l -m '20090225 - fixing build failure due to input.device changes' Commodore:Amiga:Workbench:Factory Preferences" -- openSUSE Feature: https://features.opensuse.org/305905

1 3

[openFATE 306192] Make BuildService accessible for anonymous users
by fate_noreply＠suse.de 22 Mar '10

22 Mar '10

Feature added by: Michal Vyskocil (mvyskocil) Feature #306192, revision 1, last change by Title: Make BuildService accessible for anonymous users Buildservice: Unconfirmed Priority Requester: Important Requested by: Michal Vyskocil (mvyskocil) Description: We hides many useful information about our distribution behind a Novell login, which makes a participation harder. Other distributions are much more opened even for anonymous users, so you can browse source codes, patches, changelogs, build logs, ... even if you are an anonymous users. We should be opened as much as possible if we want to be a community based distribution. Some examples: * Fedora CVS (http://cvs.fedoraproject.org/viewvc//) expose all Fedora packages with full history and for anonymous users * kojibuild info (http://koji.fedoraproject.org/koji/buildinfo?buildID=81815) - you have a full access to building informations from koji system and some of them are not available for OBS users at all. * Debian changelog browsing (http://packages.debian.org/changelogs/pool/main/c/cdbs/cdbs_0.4.52/changelog) Debian offers a changelog browsing (they don't use a centralized VCS) without registration. * lintian reports (http://lintian.debian.org/maintainer/build-common-hackers@lists.alioth.debi…) you can see a lintian issues for every package. * Debian build log (http://buildd.debian.org/pkg.cgi?pkg=libmatthew-java) Debian also offers an access to a build log of package. * Gentoo package information (http://packages.gentoo.org/package/app-office/nostaples?ts=2009-03-11T05:57…) Gentoo offers many information about package Those examples are only for illustrate of other approaches. I don't try to tell we must implement CVS because Fedora has it. And some issues like an alternative of Gentoo package view should be implemented in upcoming Software Portal. We should publish (at least for openSUSE:* projects) sources of packages and a build logs. -- openSUSE Feature: https://features.opensuse.org/306192

1 25

[openFate 305104] Provide possibility to configure WEP/WPA/WPA2/... at installation
by fate_noreply＠suse.de 09 Mar '10

09 Mar '10

Feature added by: Lukas Ocilka <locilka(a)novell.com> Feature #305104, revision 1, last change by Title: Provide possibility to configure WEP/WPA/WPA2/... at installation openSUSE-11.1: New Priority Requester: Desirable Requested by: Jim Creech <jacreech(a)suddenlink.net> Partner organization: openSUSE.org Description: It is possible to configure a network in the first stage installation but it is only possible to select DHCP or Static + configure proxy. It is impossible to configure a secure wireless connection. See also: Bug 293609 (https://bugzilla.novell.com/show_bug.cgi?id=293609) - No provision for entering WEP at installation -- openSUSE Feature: https://features.opensuse.org/?rm=feature_show&id=305104

1 9

[openFATE 306379] Use rsync when refreshing repositories
by fate_noreply＠suse.de 02 Mar '10

02 Mar '10

Feature added by: Piotrek Juzwiak (BenderBendingRodriguez) Feature #306379, revision 1, last change by Title: Use rsync when refreshing repositories openSUSE-11.2: Unconfirmed Priority Requester: Important Requested by: Piotrek Juzwiak (benderbendingrodriguez) Description: It would be a great idea to use rsync when refreshing repositories, one of the bad things is the refresh speed. It gets worse when people have many repositories. I'm not sure but it already compares if something has changed in the repo but to speed things up it would be great to use rsync. -- openSUSE Feature: https://features.opensuse.org/306379

1 14

[openFate 305724] Allow to take over old users by home directory
by fate_noreply＠suse.de 02 Mar '10

02 Mar '10

Feature added by: Jiří Suchomel (jsuchome) Feature #305724, revision 1, last change by Title: Allow to take over old users by home directory openSUSE-11.2: New Priority Requester: Neutral Requested by: Jiří Suchomel (jsuchome) Partner organization: openSUSE.org Description: (from bug reporter:) I have a seperate /home partition and whenever I reinstall/upgrade I just set up the same user as before and he gets assigned the same uid (1000) so nothing gets broken. But I guess with more users and corresponding home directories this aproach begs for wrong permissions, so I suggest the following: In case /home isn't empty it could take all directories available and list them as users to specify their data (Name, login, passwort etc as usual) and then assign corresponding uid. References: https://bugzilla.novell.com/show_bug.cgi?id=464238 -- openSUSE Feature: https://features.opensuse.org/?rm=feature_show&id=305724

1 7