August 2012 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 713194] New: Vlan interface does not work
by bugzilla_noreply＠novell.com 02 Aug '12

02 Aug '12

https://bugzilla.novell.com/show_bug.cgi?id=713194 https://bugzilla.novell.com/show_bug.cgi?id=713194#c0 Summary: Vlan interface does not work Classification: openSUSE Product: openSUSE 11.4 Version: Final Platform: x86-64 OS/Version: openSUSE 11.4 Status: NEW Severity: Major Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: luizluca(a)tre-sc.gov.br QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:6.0) Gecko/20100101 Firefox/6.0 Hello, First of all, yast cannot configure correctly a vlan interface using a bond0. When I configure it, it copies the bond0 configuration and just rename it to ifcfg-bond0.<vlanid>. However, the network scripts does not bring it up as they consider it a bond device, which need bond interfaces. I created by hand the same configuration that works with SLES. ifcfg-vlan<vlan-id> and defined bond0 as its device. However, even with the devices up, I get no network traffic. All configurations seems to be OK: # cat /etc/sysconfig/network/ifcfg-bond0 BONDING_MASTER='yes' BONDING_MODULE_OPTS='mode=802.3ad miimon=100' BONDING_SLAVE0='eth0' BONDING_SLAVE1='eth1' BOOTPROTO='none' BROADCAST='' ETHTOOL_OPTIONS='' IPADDR='' MTU='' NAME='' NETMASK='' NETWORK='' REMOTE_IPADDR='' STARTMODE='auto' USERCONTROL='no' # cat /etc/sysconfig/network/ifcfg-vlan1704 BOOTPROTO='static' BROADCAST='' ETHTOOL_OPTIONS='' IPADDR='0.0.0.0/32' MTU='' NAME='' NETWORK='' REMOTE_IPADDR='' STARTMODE='auto' USERCONTROL='no' ETHERDEVICE='bond0' # cat /etc/sysconfig/network/ifcfg-vlan1709 BOOTPROTO='static' BROADCAST='' ETHTOOL_OPTIONS='' IPADDR='0.0.0.0/32' MTU='' NAME='' NETWORK='' REMOTE_IPADDR='' STARTMODE='auto' USERCONTROL='no' ETHERDEVICE='bond0' # cat /proc/net/bonding/bond0 /proc/net/vlan/* Ethernet Channel Bonding Driver: v3.7.0 (June 2, 2010) Bonding Mode: IEEE 802.3ad Dynamic link aggregation Transmit Hash Policy: layer2 (0) MII Status: up MII Polling Interval (ms): 100 Up Delay (ms): 0 Down Delay (ms): 0 802.3ad info LACP rate: slow Aggregator selection policy (ad_select): stable Active Aggregator Info: Aggregator ID: 1 Number of ports: 2 Actor Key: 17 Partner Key: 301 Partner Mac Address: 00:21:91:05:b7:e5 Slave Interface: eth0 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 00:1c:c4:ee:8c:ce Aggregator ID: 1 Slave queue ID: 0 Slave Interface: eth1 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 00:1c:c4:ee:8c:cc Aggregator ID: 1 Slave queue ID: 0 VLAN Dev name | VLAN ID Name-Type: VLAN_NAME_TYPE_PLUS_VID_NO_PAD vlan1704 | 1704 | bond0 vlan1709 | 1709 | bond0 vlan1704 VID: 1704 REORDER_HDR: 1 dev->priv_flags: 8001 total frames received 0 total bytes received 0 Broadcast/Multicast Rcvd 0 total frames transmitted 18 total bytes transmitted 1372 total headroom inc 0 total encap on xmit 0 Device: bond0 INGRESS priority mappings: 0:0 1:0 2:0 3:0 4:0 5:0 6:0 7:0 EGRESS priority mappings: vlan1709 VID: 1709 REORDER_HDR: 1 dev->priv_flags: 8001 total frames received 0 total bytes received 0 Broadcast/Multicast Rcvd 0 total frames transmitted 18 total bytes transmitted 1372 total headroom inc 0 total encap on xmit 0 Device: bond0 INGRESS priority mappings: 0:0 1:0 2:0 3:0 4:0 5:0 6:0 7:0 EGRESS priority mappings: The bond interface: bond0 Link encap:Ethernet HWaddr 00:1C:C4:EE:8C:CE inet6 addr: fe80::21c:c4ff:feee:8cce/64 Scope:Link UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1 RX packets:810 errors:0 dropped:0 overruns:0 frame:0 TX packets:335 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:77953 (76.1 Kb) TX bytes:40652 (39.6 Kb) And the interfaces with no rx vlan1704 Link encap:Ethernet HWaddr 00:1C:C4:EE:8C:CE inet6 addr: fe80::21c:c4ff:feee:8cce/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:18 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:1372 (1.3 Kb) vlan1709 Link encap:Ethernet HWaddr 00:1C:C4:EE:8C:CE inet6 addr: fe80::21c:c4ff:feee:8cce/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:18 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:1372 (1.3 Kb) Wireshark shows that the tagged packages are received in bond0 interface. The problem is just that it does not get to vlan<vlanid> interfaces. THe hardware is a ProLiant DL380 G5, Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet. Opensuse is 11.4, x86_64, fully updated. Reproducible: Always Steps to Reproduce: 1. configure vlan as shown before 2. try to use the network Actual Results: 3. no package (tagged) is received from network in vlan interface Expected Results: 3. the tagged package should arrive in the respective vlan interface -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1

[Bug 717170] New: Radeon 9200SE (rv280) ramdomly xv choppy playback in full screen with KDE desktop effects enabled
by bugzilla_noreply＠novell.com 02 Aug '12

02 Aug '12

https://bugzilla.novell.com/show_bug.cgi?id=717170 https://bugzilla.novell.com/show_bug.cgi?id=717170#c0 Summary: Radeon 9200SE (rv280) ramdomly xv choppy playback in full screen with KDE desktop effects enabled Classification: openSUSE Product: openSUSE 11.4 Version: Final Platform: 32bit OS/Version: openSUSE 11.4 Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: jcsl(a)eresmas.com QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Opera/9.80 (X11; Linux i686; U; es-ES) Presto/2.9.168 Version/11.51 Hello. There comes a time when video starts playing jumpy when you change to full screen mode. When you come back to normal window mode the video plays fast until it reach the real position. It can be the first video you play or not, but in the end it will happend. From then on subsequent videos all play choppy. If effects are disabled videos plays fine, but if they are reenabled the problem persists. Sometimes (rare) switching to VTs or disabling/enabling effects several times fixes the problem for a while. In normal window or with effects disabled the problem never happens. I would disable effects but then there is some sort of tearing: a diagonal like a stair appears in horizontal or vertical movements and when light flashes in some scene. Disabling composite doesn't make this to disappear (it it is tearing XV_VSYNC don't seen to work). OpenGL output is vsynced with or without composite but is unusable because it is very slow. I see no warnings or errors in Xorg.log.0. Enabling/disabling options in 50-device.conf doesn't help or hurt. I've enabled BackingStore, EXAVSync and AccelDFS. If I disable desktop effects and run xcompmgr -a all videos play fine (but with xcompmgr -c the behaviour is as I described earlier). The problem with this is graphical corruption (some parts are not redrawn until the mouse pass over them, ...). With nomodeset the system is very slow an unusable. I've tried with a default openSUSE installation, and with Tumbleweed, and with kernel stable + X11:/XOrg repo and with KDE 4.7. The problem is present in all cases. I've noticed that when the problem occurs the redraw of windows is a bit slower too. Greetings. Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 7

[Bug 722101] New: "irq 10: nobody cared" problem with pata disks at promise ultra133tx2
by bugzilla_noreply＠novell.com 02 Aug '12

02 Aug '12

https://bugzilla.novell.com/show_bug.cgi?id=722101 https://bugzilla.novell.com/show_bug.cgi?id=722101#c0 Summary: "irq 10: nobody cared" problem with pata disks at promise ultra133tx2 Classification: openSUSE Product: openSUSE 11.4 Version: Final Platform: x86 OS/Version: openSUSE 11.4 Status: NEW Severity: Critical Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: wefing(a)gmx.de QAContact: qa(a)suse.de Found By: --- Blocker: --- Created an attachment (id=454473) --> (http://bugzilla.novell.com/attachment.cgi?id=454473) output of hwinfo on the 11.4 rescue system User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.0.14) Gecko/2009090900 SUSE/3.0.14-0.1 Firefox/3.0.14 I'm running an old PC (PIII 700 MHz with two Samsung pata disks attached to a Promise Ultra133Tx2 PCI controller) under suse 10.3. Everything works as expected. Now I try to upgrade to suse 11.4. Before doing this, I boot into the rescue system of the 11.4 installation DVD in order to change the partitioning. This involves copying some 20 GB of data between several ext3 file systems residing on one of the two disks. It turned out that i/o performance during these operations was only 1/10 or worse of the performance observed under suse 10.3. Same result with "hdparm -t", which reports an i/o throughput of 5 MB/s under suse 11.4, but of 55MB/s under suse 10.3. In the suse 11.4 boot.msg file, I find the following message: 'irq 10: nobody cared (try booting with the "irqpoll" option)', see the attached hwinfo file. As /proc/interrupts reveals, irq 10 is associated with the pata disks. Booting with the irqpoll option does not make the diagnostic message disappear, "hdparm -t", however, now reports i/o throughputs ranging between 5MB/s and 55MB/s. Trying to copy data between partitions as described above leads to a system freeze after a minute or so. From this I conclude that using "irqpoll" is not an option here. I tried other boot options (acpi=off, noapic, nolapic, routeirq, assign-buses) without any success. Reproducible: Always Steps to Reproduce: 1. Boot into the rescue system of the suse 11.4 installation dvd. 2. hdparm -t <pata_disk_at_promise_controller> 3. Actual Results: hdparm reports an i/o throughput that is way below the maximal possible throughput, i.e., around 5MB/s. Expected Results: Expected throughput is 55MB/s. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 5

[Bug 691073] New: Driver rt2800pci is not configured in standard kernels
by bugzilla_noreply＠novell.com 02 Aug '12

02 Aug '12

https://bugzilla.novell.com/show_bug.cgi?id=691073 https://bugzilla.novell.com/show_bug.cgi?id=691073#c0 Summary: Driver rt2800pci is not configured in standard kernels Classification: openSUSE Product: openSUSE 11.4 Version: Final Platform: x86-64 OS/Version: openSUSE 11.4 Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: Larry.Finger(a)lwfinger.net QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:2.0.0) Gecko/20100101 Firefox/4.0 The driver for the PCI variants of the Ralink RT2800, RT3090, et al. is not enabled in the standard kernels. I have checked default for i386 and desktop for x86_64. To fix this, "CONFIG_RT2800PCI=m" is needed instead of "@CONFIG_2800PCI is not set" in .config. Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 11

[Bug 680674] New: System suspend does not work anymore
by bugzilla_noreply＠novell.com 02 Aug '12

02 Aug '12

https://bugzilla.novell.com/show_bug.cgi?id=680674 https://bugzilla.novell.com/show_bug.cgi?id=680674#c0 Summary: System suspend does not work anymore Classification: openSUSE Product: openSUSE 11.4 Version: Final Platform: x86-64 OS/Version: SuSE Other Status: NEW Severity: Critical Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: cy6erGn0m(a)gmail.com QAContact: qa(a)suse.de Found By: --- Blocker: --- Created an attachment (id=420069) --> (http://bugzilla.novell.com/attachment.cgi?id=420069) System information file: uname, cpuinfo, meminfo, lspci, lsmod, glxinfo User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:2.0b12) Gecko/20110222 Firefox/4.0b12 I migrted from Mandriva Linux 2010.2 to OpenSuSe 11.4 and found that Suspend to RAM functionality broken. System suspends successful but brashes at wakeup: laptop boots from POST screen without any messages. Suspend functionality was worked fine with kernel 2.6.33 Reproducible: Always Steps to Reproduce: 1. Login 2. Click suspend (Suspend to RAM in old versions) 3. Wait while suspend complete 4. Press any key to wakeup device Actual Results: Laptop boots from POST screen without any error messages and it looks like the laptop was just turned on. Expected Results: Sustem should wakeup and continue Laptop: Sony VAIO VPC F11Z1R See additional system information in attachment. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 27

[Bug 678763] New: kernel 2.6.37 freezes laptop within seconds after or during boot. No oops, just - nothing...
by bugzilla_noreply＠novell.com 02 Aug '12

02 Aug '12

https://bugzilla.novell.com/show_bug.cgi?id=678763 https://bugzilla.novell.com/show_bug.cgi?id=678763#c0 Summary: kernel 2.6.37 freezes laptop within seconds after or during boot. No oops, just - nothing... Classification: openSUSE Product: openSUSE 11.4 Version: Final Platform: x86 OS/Version: SuSE Other Status: NEW Severity: Critical Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: jpoortvliet(a)novell.com QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.2.13) Gecko/20101203 SUSE/3.6.13-0.2.1 Firefox/3.6.13 kernel 2.6.37 freezes the laptop at some point after or during boot. No oops, just - nothing. Sometimes the screen goes slowly white (real scary). It can take a few minutes to happen; or it can happen during the first 10 seconds of booting up that nothing happens anymore. The system works fine with 11.3 and even newer kernels up to 2.6.37; So openSUSE 11.4 doesn't work. Any info I can give to help solve this... It's a netbook, N450, 2 gb ram, brand 'microboard'. I believe it has a broadcom wifi chip which does never work, btw :D cheers, Jos Reproducible: Always Steps to Reproduce: 1.boot up 2.wait o click around (if it boots up at all) 3. Actual Results: full freeze, nothing happens, no oops, no output anywhere. capslock light stops working (that is the telltale sign something is wrong...) Expected Results: work! lspci: 0.0 Host bridge: Intel Corporation N10 Family DMI Bridge 00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller 00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02) 00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 02) 00:1c.3 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 4 (rev 02) 00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02) 00:1f.2 IDE interface: Intel Corporation N10/ICH7 Family SATA IDE Controller (rev 02) 00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02) 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02) lsusb (minus roothubs): 001 Device 002: ID 0ac8:3450 Z-Star Microelectronics Corp. Bus 001 Device 003: ID 05e1:0100 Syntek Semiconductor Co., Ltd Bus 001 Device 004: ID 1c7a:0801 LighTuning Technology Inc. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 11

[Bug 679143] New: DVD-RW drive is not recognized with "failed to set xfermode (err_mask=0x4)" boot message
by bugzilla_noreply＠novell.com 02 Aug '12

02 Aug '12

https://bugzilla.novell.com/show_bug.cgi?id=679143 https://bugzilla.novell.com/show_bug.cgi?id=679143#c0 Summary: DVD-RW drive is not recognized with "failed to set xfermode (err_mask=0x4)" boot message Classification: openSUSE Product: openSUSE 11.4 Version: Final Platform: x86-64 OS/Version: SuSE Other Status: NEW Severity: Major Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: uzsrjz(a)uni-bonn.de QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:2.0) Gecko/20100101 Firefox/4.0 My DVD-RW drive (DVD-RW, SATA, Pioneer, AHCI mode) is not recognized with first three boot messages "failed to set xfermode (err_mask=0x4)" after an new installation of openSUSE 11.4. The problem did not appear for openSUSE 11.3. Workarounds from forums (Ubuntu) did not solve the problem, neither adding the "irqpoll" kernel boot parameter nor a hardware power off. For the second workaround only a first boot results in a recognized DVD drive. After rebooting the same problem appears as described above. The problem may be solved here "https://bbs.archlinux.org/viewtopic.php?id=107847", but i did not check this for my system. Reproducible: Always Steps to Reproduce: 1. (Re)boot system without hardware power off(e.g. un/replugging the power cable) Actual Results: DVD drive is not recognized, i.e. is not present in /dev, a CD/DVD cannot be read or written. Expected Results: DVD drive should be recognized. The DVD-RW drive is a Pioneer DVR 216D SATA model. The "desktop" kernel is used. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 14

[Bug 466431] lpfc module with Emulex Corporation Helios-X LightPulse Fibre Channel Adapter (rev 01) [LP11002] not working
by bugzilla_noreply＠novell.com 02 Aug '12

02 Aug '12

https://bugzilla.novell.com/show_bug.cgi?id=466431 https://bugzilla.novell.com/show_bug.cgi?id=466431#c19 Jeff Mahoney <jeffm(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED CC| |jeffm(a)suse.com Resolution| |WONTFIX --- Comment #19 from Jeff Mahoney <jeffm(a)suse.com> 2012-08-02 11:53:42 EDT --- With the coming release of openSUSE 12.2, openSUSE kernel developers are focusing their efforts there. Reports against openSUSE 11.4 and prior will not get the attention needed to resolve them before openSUSE 12.2 is release and openSUSE 11.4 becomes unmaintained. Please re-test with openSUSE 12.1 or openSUSE RC2+ and re-open with an updated Product if you still encounter your issue. We apologize for this issue not getting the attention it deserves but we are focusing our resources in the area where they will have the most impact for our users. We're working hard to make openSUSE 12.2 the best openSUSE release yet! -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 0

[Bug 686540] New: JMicron JMC250 (jme driver) does not work when laptop started with power unplugged
by bugzilla_noreply＠novell.com 02 Aug '12

02 Aug '12

https://bugzilla.novell.com/show_bug.cgi?id=686540 https://bugzilla.novell.com/show_bug.cgi?id=686540#c0 Summary: JMicron JMC250 (jme driver) does not work when laptop started with power unplugged Classification: openSUSE Product: openSUSE 11.4 Version: Final Platform: x86-64 OS/Version: openSUSE 11.4 Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: henryju(a)yahoo.fr QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:2.0.0) Gecko/20100101 Firefox/4.0 When I start up my laptop with power cable unplugged, I am not able to connect to network. In messages log I can see this output repeating indefinitly: Apr 4 20:24:18 xxx kernel: [ 1907.151069] jme: Disable RX engine timeout Apr 4 20:24:18 xxx kernel: [ 1907.151907] jme 0000:03:00.0: eth0: Link is down Apr 4 20:24:21 xxx kernel: [ 1910.199325] jme 0000:03:00.0: eth0: Link is up at ANed: 1000 Mbps, Full-Duplex, MDI Module seems to be loaded, but I am not able to get an IP address (dhcpclient will timeout). Everything works fine when I start the laptop with AC power. # uname -a Linux xxx 2.6.37.1-1.2-desktop #1 SMP PREEMPT 2011-02-21 10:34:10 +0100 x86_64 x86_64 x86_64 GNU/Linux Reproducible: Always Steps to Reproduce: 1.Unplug AC power 2.Start OpenSUSE 3.ifconfig -> no ip assigned -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 299163] Cannot authenticate to LDAP server with loaded AppArmor profiles
by bugzilla_noreply＠novell.com 02 Aug '12

02 Aug '12

https://bugzilla.novell.com/show_bug.cgi?id=299163 https://bugzilla.novell.com/show_bug.cgi?id=299163#c David Stockbridge <dhstockbridge(a)ra.rockwell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |dhstockbridge(a)ra.rockwell.c | |om OS/Version|openSUSE 10.3 |SLES 10 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 0