April 2012 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 753904] New: systemd ignores settings in /etc/systemd/system.conf
by bugzilla_noreply＠novell.com 11 Apr '12

11 Apr '12

https://bugzilla.novell.com/show_bug.cgi?id=753904 https://bugzilla.novell.com/show_bug.cgi?id=753904#c0 Summary: systemd ignores settings in /etc/systemd/system.conf Classification: openSUSE Product: openSUSE 12.1 Version: Final Platform: All OS/Version: openSUSE 12.1 Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: Yarny(a)public-files.de QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:10.0.2) Gecko/20100101 Firefox/10.0.2 I set ShowStatus=yes and SysVConsole=yes in /etc/systemd/system.conf and reboot, but systemd ignores my orders. Kernel command line does not have any settings which might override system.conf. >From a console: > linux-1234:~ # cat /etc/systemd/system.conf | grep -E 'Status|Console' > ShowStatus=yes > SysVConsole=yes > linux-1234:~ # systemctl show | grep -E 'Status|Console' > ShowStatus=no > SysVConsole=no > linux-1234:~ # cat /proc/cmdline > root=/dev/disk/by-id/ata-VBOX_HARDDISK_VB8362006a-7bc1993e-part2 resume=/dev/disk/by-id/ata-VBOX_HARDDISK_VB8362006a-7bc1993e-part1 splash=off quiet vga=0x317 Reproducible: Always -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 5

[Bug 753741] New: openSUSE 12.1 connected to network, internet does not work
by bugzilla_noreply＠novell.com 11 Apr '12

11 Apr '12

https://bugzilla.novell.com/show_bug.cgi?id=753741 https://bugzilla.novell.com/show_bug.cgi?id=753741#c0 Summary: openSUSE 12.1 connected to network, internet does not work Classification: openSUSE Product: openSUSE 12.1 Version: Final Platform: x86-64 OS/Version: Other Status: NEW Severity: Critical Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: leonaks(a)gmail.com QAContact: qa-bugs(a)suse.de Found By: Customer Blocker: Yes Hi It is a problem endemic to Suse 12.1. On install of 12.1 from 11.4 I could not connect to the internet consistently only in rare cases over time. I am using a Wi Fi connection from my neighbors network. Completely legal as the airwaves are free. When I reinstalled 11.4 I again was able to connect to the Internet. So it appears there is a problem with openSUSE 12.1. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1

[Bug 753586] New: Avogardo program fails to starts with 'Could not initialize SIP API' message
by bugzilla_noreply＠novell.com 11 Apr '12

11 Apr '12

https://bugzilla.novell.com/show_bug.cgi?id=753586 https://bugzilla.novell.com/show_bug.cgi?id=753586#c0 Summary: Avogardo program fails to starts with 'Could not initialize SIP API' message Classification: openSUSE Product: openSUSE 11.4 Version: Final Platform: All OS/Version: openSUSE 11.4 Status: NEW Severity: Normal Priority: P5 - None Component: X11 Applications AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: lijewski.stefan(a)zabka.pl QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux i686; rv:10.0.2) Gecko/20100101 Firefox/10.0.2 Just like in summary - starting avogradro (chemical drawing package) version 1.0.1-22.5 fails with following message: The _C_API object in the sip python module is invalid. Could not initialize SIP API ! terminate called after throwing an instance of 'boost::python::error_already_set' This was fixed in upstream package 1.0.3 - already in 12.1 and Education project. Could please update it in 11.4? Already tested on 11.4 - should I submit it from my home project to openSUSE:11.4:Update:Test? Reproducible: Always Steps to Reproduce: 1. Run avogadro 2. 3. Actual Results: Fails to start Expected Results: Should start -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1

[Bug 753585] New: OpenSuse 12.1 boot hangs until I plug in my lan cable
by bugzilla_noreply＠novell.com 11 Apr '12

11 Apr '12

https://bugzilla.novell.com/show_bug.cgi?id=753585 https://bugzilla.novell.com/show_bug.cgi?id=753585#c0 Summary: OpenSuse 12.1 boot hangs until I plug in my lan cable Classification: openSUSE Product: openSUSE 12.1 Version: Final Platform: x86-64 OS/Version: openSUSE 12.1 Status: NEW Severity: Critical Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: lars-urban(a)urbanswelt.de QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (Windows NT 6.1) AppleWebKit/535.11 (KHTML, like Gecko) Chrome/17.0.963.79 Safari/535.11 Laptop freez when the network cable not plugged in http://forums.opensuse.org/english/get-technical-help-here/install-boot-log… Reproducible: Always Steps to Reproduce: 1.plugged the network cable in: system start fine 2.plugged the network cable out: system freez (KDE starts) 3.System is finish loaded , cable out --> freez Actual Results: 1) chkconfig network-remotefs off 2) i can plugout the cable without freez the system after the system is finish loaded 3) Expected Results: stable network management AMD C-60 APU with Radeon(tm) HD Graphics , RAM 4gb , ATI SBx00 Azalia (Intel HDA) ,Linux 3.1.9-1.4-desktop x86_64, Distri openSUSE 12.1 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 6

[Bug 756303] New: fillup does not work with array variables
by bugzilla_noreply＠novell.com 11 Apr '12

11 Apr '12

https://bugzilla.novell.com/show_bug.cgi?id=756303 https://bugzilla.novell.com/show_bug.cgi?id=756303#c0 Summary: fillup does not work with array variables Classification: openSUSE Product: openSUSE 12.1 Version: Final Platform: Other OS/Version: openSUSE 12.1 Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: luizluca(a)tre-sc.gov.br QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/535.19 (KHTML, like Gecko) Chrome/18.0.1025.151 Safari/535.19 Hello, /bin/fillup does not consider the existence of array variables (i.e: VAR[3]). It just fill it the first time and remove it the next time and so on. Please, fix this issue with fillup. I can use fillup -x (in order to replace all contents) but this is not ideal. Also, %fillup_only rpm macro does not allow me to pass arguments, so I cannot use it. Reproducible: Always Steps to Reproduce: 1.Use this template: #Simple VAR VAR1=abc #Array VAR VAR2[0]=abc VAR2[1]=123 2. touch test; fillup -q test test.template 3. check the test file 4. touch test; fillup -q test test.template 5. check the test file 6. touch test; fillup -q test test.template 7. check the test file Actual Results: At step 3, file has the array vars. At step 5, file does not have the array vars. At step 7, file has again the array vars. Expected Results: At step 3, file has the array vars. At step 5, file should keep the array vars, keeping its changes. At step 5, file should keep the array vars, keeping its changes. It removes all occurrences of VAR2, even when using index out of template range. However, it keeps the content when the VAR array is not include in template. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1

[Bug 750083] New: KDE keyboard layout variants hidden
by bugzilla_noreply＠novell.com 10 Apr '12

10 Apr '12

https://bugzilla.novell.com/show_bug.cgi?id=750083 https://bugzilla.novell.com/show_bug.cgi?id=750083#c0 Summary: KDE keyboard layout variants hidden Classification: openSUSE Product: openSUSE 12.1 Version: Final Platform: x86-64 OS/Version: openSUSE 12.1 Status: NEW Severity: Normal Priority: P5 - None Component: KDE4 Workspace AssignedTo: kde-maintainers(a)suse.de ReportedBy: peterke(a)gmail.com QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/535.11 (KHTML, like Gecko) Chrome/17.0.963.56 Safari/535.11 On the keyboard layout configuration dialog, if I select the Hungarian keyboard, on the variants combo box only the "default" appears (whilst there are about 10 different ones). The only way to get to another one is to add the default, and afterwards on the list of keyboard layouts installed double click on the variants section, where there all the ones are correctly displayed. Reproducible: Always Steps to Reproduce: 1. Open keyboard layout config 2. Add Hungarian layout and look at the variant combo 3. Be amazed :P Actual Results: Only the "Default" variant is in the list Expected Results: All the other 10 variants :P -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 664083] New: KPackageKit naming clash with sw_single
by bugzilla_noreply＠novell.com 10 Apr '12

10 Apr '12

https://bugzilla.novell.com/show_bug.cgi?id=664083 https://bugzilla.novell.com/show_bug.cgi?id=664083#c0 Summary: KPackageKit naming clash with sw_single Classification: openSUSE Product: openSUSE 11.4 Version: Milestone 5 of 6 Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: KDE4 Workspace AssignedTo: kde-maintainers(a)suse.de ReportedBy: martin.schlander(a)gmail.com QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Opera/9.80 (X11; Linux x86_64; U; da) Presto/2.7.62 Version/11.00 In systemsettings the KPackageKit KCM appears under the name "Software Management" which is identical with sw_single in YaST control center. This is likely to confuse some people. KPK kcm should be renamed, and the new name localized via opensuse i18n. Not sure what would be a better name for it, maybe simply "KPackageKit Settings" or similar. Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 7

[Bug 753723] New: Piping into grep fails with EPIPE
by bugzilla_noreply＠novell.com 10 Apr '12

10 Apr '12

https://bugzilla.novell.com/show_bug.cgi?id=753723 https://bugzilla.novell.com/show_bug.cgi?id=753723#c0 Summary: Piping into grep fails with EPIPE Classification: openSUSE Product: openSUSE 12.2 Version: Factory Platform: x86-64 OS/Version: openSUSE 12.2 Status: NEW Severity: Critical Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: ManuelStol(a)operamail.com QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created an attachment (id=482857) --> (http://bugzilla.novell.com/attachment.cgi?id=482857) strace of (echo "foobar" | grep "foo") User-Agent: Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/534.34 (KHTML, like Gecko) konqueror/4.8.1 Safari/534.34 Piping stdout into grep fails with an EPIPE. Reproducible: Always Steps to Reproduce: 1. Open a terminal (xterm, konsole) as a normal user. 2. type: echo "foobar" | grep "foo" Actual Results: No output to stdout due to an EPIPE error. Expected Results: The lines that match the grep pattern. - This doesn't happen when opening a terminal as root nor when switching to root with 'su -'. - Neither grep nor egrep work. - When replacing grep with sed, piping works as expected. - Tried it with konsole, xterm and linux 32-bit terminal. - I've been updating my system since openSUSE 11.4. - I've re-intalled the grep rpm. - YaST does not start on a 64bit system, as grep is used in /usr/lib/YaST2/bin/yast2-funcs Workaround: Start YaST with '--qt' or '--gtk'. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 5

[Bug 756247] New: cannot import python-gobject
by bugzilla_noreply＠novell.com 10 Apr '12

10 Apr '12

https://bugzilla.novell.com/show_bug.cgi?id=756247 https://bugzilla.novell.com/show_bug.cgi?id=756247#c0 Summary: cannot import python-gobject Classification: openSUSE Product: openSUSE 12.1 Version: Final Platform: All OS/Version: openSUSE 12.1 Status: NEW Severity: Major Priority: P5 - None Component: GNOME AssignedTo: bnc-team-gnome(a)forge.provo.novell.com ReportedBy: spiollinux(a)alice-dsl.net QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux i686; rv:11.0) Gecko/20100101 Firefox/11.0 When trying to import the module 'gi', which is part of python-gobject, the python- interpreter fails to do that and prints Traceback. gnome-tweak-tool uses this module too and fails to start with the same error Reproducible: Always Steps to Reproduce: 1. open the python interpreter 2. enter "import gi" 3. watch the traceback Actual Results: Traceback (most recent call last): File "/usr/bin/gnome-tweak-tool", line 22, in <module> import gi File "/usr/lib/python2.7/site-packages/gi/__init__.py", line 23, in <module> from ._gi import _API, Repository ImportError: /usr/lib/python2.7/site-packages/gi/_gi.so: undefined symbol: g_value_get_schar Expected Results: the module gets imported without errors -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 7

[Bug 750322] New: 3D slide transition in LibO Impress
by bugzilla_noreply＠novell.com 10 Apr '12

10 Apr '12

https://bugzilla.novell.com/show_bug.cgi?id=750322 https://bugzilla.novell.com/show_bug.cgi?id=750322#c0 Summary: 3D slide transition in LibO Impress Classification: openSUSE Product: openSUSE 12.1 Version: Final Platform: x86-64 OS/Version: openSUSE 12.1 Status: NEW Severity: Normal Priority: P5 - None Component: LibreOffice AssignedTo: bnc-team-ooo(a)forge.provo.novell.com ReportedBy: michael.malessa(a)web.de QAContact: cwei(a)suse.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:10.0.2) Gecko/20100101 Firefox/10.0.2 As of now openSUSE 12.1 still uses LibO 3.4.2. But with this version of LibO 3D slide transitions in Impress are still not available. Would it be possible to give us users of openSUSE 12.1 a regular update to LibO 3.4.5? The issue seems to be fixed in this version (cf. http://wiki.documentfoundation.org/Releases/3.4.5_info_about_fixes) For openSUSE 11.4 an update to LibO 3.4.5 could also solve the issue with the broken horizontal scroll bar. Even when the openSUSE Build Service LibreOffice repository is activated only LibO 3.4.4 is available. I am aware that these report deals with known issues but it would be great if they would be fixed. Reproducible: Always Steps to Reproduce: 1. Select a 3D slide transition like Rochade 2. 3. Actual Results: No 3D slide transition Expected Results: Nice 3D slide transitions -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2