September 2010 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 614013] New: create boot disks refer to openSUSE 11.1
by bugzilla_noreply＠novell.com 08 Sep '10

08 Sep '10

http://bugzilla.novell.com/show_bug.cgi?id=614013 http://bugzilla.novell.com/show_bug.cgi?id=614013#c0 Summary: create boot disks refer to openSUSE 11.1 Classification: openSUSE Product: openSUSE 11.3 Version: Factory Platform: i586 OS/Version: openSUSE 11.3 Status: NEW Severity: Normal Priority: P5 - None Component: Documentation AssignedTo: ke(a)novell.com ReportedBy: rb03884(a)gmail.com QAContact: ke(a)novell.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.4) Gecko/20100513 SUSE/3.6.4-1.11 Firefox/3.6.4 The LIESMICH, LIESMICH.DOS, README & README.DOS read below: Creating openSUSE 11.1 Boot Disks --------------------------------- The boot files are split across several floppy disks. To create boot disks, run 'mkbootdisk' (the program is in this directory) on a Linux system: 1. Mount CD1 or DVD (e.g. to /media/cdrom). 2. Run /media/cdrom/boot/mkbootdisk /media/cdrom to create boot disk image files bootdisk01 - bootdiskNN. 3. Write these image files to floppies, using e.g. dd if=bootdisk01 of=/dev/fd0 (and bootdisk02 - bootdiskNN accordingly). 4. A short usage summary of 'mkbootdisk' gives mkbootdisk --help --------------------------------------------------- LIESMICH, LEISMICH.DOS read in German: openSUSE 11.1-Bootdisketten erstellen ------------------------------------- Die Bootdateien sind auf mehrere Disketten aufgeteilt. Um Bootdisketten zu erstellen, verwenden Sie 'mkbootdisk' (zu finden in diesem Verzeichnis) auf einem Linux-System: 1. Mounten Sie CD1 oder die DVD (z.B. nach /media/cdrom). 2. FÃ¼hren Sie /media/cdrom/boot/mkbootdisk /media/cdrom aus. Damit werden die Bootdateien bootdisk01 - bootdiskNN erstellt. 3. Schreiben Sie diese Dateien auf Disketten. z.B. mit dd if=bootdisk01 of=/dev/fd0 (und entsprechend auch bootdisk02 - bootdiskNN). 4. Einen kurzen Ãœberblick Ã¼ber die Bedienung des Programms 'mkbootdisk' gibt mkbootdisk --help Reproducible: Always Steps to Reproduce: 1. Open LIESMICH, LIESMICH.DOS README, README.DOS 2. The README files refer to Creating openSUSE 11.1 Boot Disks 3. The LIESMICH, files refer to openSUSE 11.1-Bootdisketten erstellen Actual Results: Creating openSUSE 11.1 Boot Disks openSUSE 11.1-Bootdisketten erstellen Expected Results: Creating openSUSE 11.3 Boot Disks openSUSE 11.3-Bootdisketten erstellen Refer to link: http://download.opensuse.org/factory/repo/oss/boot/i586/ -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 8

[Bug 636077] New: KDE:Distro:Factory/kdevelop4: segfaults when starting
by bugzilla_noreply＠novell.com 08 Sep '10

08 Sep '10

https://bugzilla.novell.com/show_bug.cgi?id=636077 https://bugzilla.novell.com/show_bug.cgi?id=636077#c0 Summary: KDE:Distro:Factory/kdevelop4: segfaults when starting Classification: openSUSE Product: openSUSE.org Version: unspecified Platform: Other OS/Version: Other Status: NEW Severity: Critical Priority: P5 - None Component: 3rd party software AssignedTo: kde-maintainers(a)suse.de ReportedBy: jimmy(a)boombatower.com QAContact: opensuse-communityscreening(a)forge.provo.novell.com Found By: Community User Blocker: --- Created an attachment (id=386666) --> (http://bugzilla.novell.com/attachment.cgi?id=386666) Output and backtrace of kdevelop when attempting to start. Kdevelop 4 segfaults when starting and fails to finish loading. I created a new user on the machine, as was suggested in IRC, logged in attempt to start kdevelop and ran into the same problem. I have confirmed this to be the case on 3 computers all running suse 11.3 on KDE Factory. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 637702] New: libvdpau package missing symlink
by bugzilla_noreply＠novell.com 08 Sep '10

08 Sep '10

https://bugzilla.novell.com/show_bug.cgi?id=637702 https://bugzilla.novell.com/show_bug.cgi?id=637702#c0 Summary: libvdpau package missing symlink Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: Other OS/Version: openSUSE 11.3 Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: deanjo(a)sasktel.net QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.8) Gecko/20100723 SUSE/3.6.8-1.3 Ant.com Toolbar 2.0.1 Firefox/3.6.8 I notice when the actual nvidia installer puts in libvdpau they also create a symlink called libvdpau.so which points to the libvdpau.so.1 file. With the existing rpm, it does not create those symlinks breaking some applications that are expecting libvdpau.so. Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 637704] New: When I instert Huawei DataCard E5808 into OpenSUSE 11.3, The DataCard cannot switch into right configuration
by bugzilla_noreply＠novell.com 08 Sep '10

08 Sep '10

https://bugzilla.novell.com/show_bug.cgi?id=637704 https://bugzilla.novell.com/show_bug.cgi?id=637704#c0 Summary: When I instert Huawei DataCard E5808 into OpenSUSE 11.3, The DataCard cannot switch into right configuration Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: All OS/Version: openSUSE 11.3 Status: NEW Severity: Normal Priority: P5 - None Component: Mobile Devices AssignedTo: mobile-bugs(a)forge.provo.novell.com ReportedBy: m00150988(a)huawei.com QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; zh-CN; rv:1.9.1.11) Gecko/20100701 Firefox/3.5.11 When I instert Huawei DataCard E5808 into OpenSUSE 11.3, The DataCard swich into a wrong configurantion .the following is the error log : T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=12d1 ProdID=144b Rev= 0.00 S: Manufacturer=HUAWEI Technology S: Product=HUAWEI Mobile S: SerialNumber=1234567890ABCDEF C:* #Ifs= 7 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms But in the common case, the Huawei DataCard E5808 should switch into the following configuration : T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 9 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=12d1 ProdID=144b Rev= 0.00 S: Manufacturer=HUAWEI Technology S: Product=HUAWEI Mobile S: SerialNumber=1234567890ABCDEF C:* #Ifs= 8 Cfg#= 1 Atr=e0 MxPwr=500mA A: FirstIf#= 1 IfCount= 2 Cls=02(comm.) Sub=00 Prot=00 I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 1 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=ff Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=(none) E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 7 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms actually, the right switch Huawei datacard command in Linux is "55534243123456780000000000000011062000000000000000000000000000" and "55534243123456780000000000000011060000000000000000000000000000" is the wrong command . So I think the OpenSUSE 11.3 should fix the issue by modifing all configuration files named with 12d1:* which are in the path "/etc/usb_modeswitch.d/" (12d1 means vendor "huawei". When I modify the command from "55534243123456780000000000000011060000000000000000000000000000" to "55534243123456780000000000000011062000000000000000000000000000" in /etc/usb_modeswitch.d/12d1:*,the everything is OK. Reproducible: Always Steps to Reproduce: 1.Insert the Huawei DataCard E5808 into OpenSUSE 11.3 2.Type the command : a. mount -t usbfs none /proc/bus/usb/ b.cat /proc/bus/usb/devices Actual Results: I find the following error log: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=12d1 ProdID=144b Rev= 0.00 S: Manufacturer=HUAWEI Technology S: Product=HUAWEI Mobile S: SerialNumber=1234567890ABCDEF C:* #Ifs= 7 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Expected Results: But in the common case, the Huawei DataCard E5808 should switch into the following configuration : T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 9 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=12d1 ProdID=144b Rev= 0.00 S: Manufacturer=HUAWEI Technology S: Product=HUAWEI Mobile S: SerialNumber=1234567890ABCDEF C:* #Ifs= 8 Cfg#= 1 Atr=e0 MxPwr=500mA A: FirstIf#= 1 IfCount= 2 Cls=02(comm.) Sub=00 Prot=00 I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 1 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=ff Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=(none) E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 7 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms actually, the right switch Huawei datacard command in Linux is "55534243123456780000000000000011062000000000000000000000000000" and "55534243123456780000000000000011060000000000000000000000000000" is the wrong command . So I think the OpenSUSE 11.3 should fix the issue by modifing all configuration files named with 12d1:* which are in the path "/etc/usb_modeswitch.d/" (12d1 means vendor "huawei". When I modify the command from "55534243123456780000000000000011060000000000000000000000000000" to "55534243123456780000000000000011062000000000000000000000000000" in /etc/usb_modeswitch.d/12d1:*,the everything is OK. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1

[Bug 637236] New: X windows segfaults during startup in openSUSE 11.4M1
by bugzilla_noreply＠novell.com 08 Sep '10

08 Sep '10

https://bugzilla.novell.com/show_bug.cgi?id=637236 https://bugzilla.novell.com/show_bug.cgi?id=637236#c0 Summary: X windows segfaults during startup in openSUSE 11.4M1 Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: x86-64 OS/Version: SuSE Other Status: NEW Severity: Normal Priority: P5 - None Component: X.Org AssignedTo: bnc-team-xorg-bugs(a)forge.provo.novell.com ReportedBy: linxt(a)comcast.net QAContact: xorg-maintainer-bugs(a)forge.provo.novell.com Found By: --- Blocker: --- Created an attachment (id=387654) --> (http://bugzilla.novell.com/attachment.cgi?id=387654) log files after installation User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.8) Gecko/20100723 SUSE/3.6.8-0.1.1 Firefox/3.6.8 After installation from DVD (build 0715) which went without apparent error, at the initial login screen, when user or root credentials are entered the screen temporarily blanks and then returns to the login screen. After several attempts I switched to console login and after entering credentials for both user (tom) and root entered startx. This resulted in console messages which came too fast to read. The final screen showed "end of backtrace at the top" followed by "segmentation fault at address 0x16d49", then "Fatal server error: caught signal 11". I have re-installed twice since then with the same results at the same address. System info: Dell Studio 1745, 4GB RAM, 250GB HD triple boot windows 7, openSUSE 11.3, and OpenSUSE 11.4M1 (build 0715) Reproducible: Always Steps to Reproduce: 1.Install 11.4M1 2.Attempt to login 3.After login fails, login from console and run startx Actual Results: Segmentation fault at address 0x16d49 Expected Results: Normal Xwindows startup -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 8

[Bug 637234] New: irxevent does not work and lirc does not compile
by bugzilla_noreply＠novell.com 07 Sep '10

07 Sep '10

https://bugzilla.novell.com/show_bug.cgi?id=637234 https://bugzilla.novell.com/show_bug.cgi?id=637234#c0 Summary: irxevent does not work and lirc does not compile Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: X11 Applications AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: Reiner.Proels(a)gmail.com QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686 (x86_64); de; rv:1.9.1.5) Gecko/20091102 Firefox/3.5.5 I have installes lirc. I get the codes with irw but irxevent semms to do nothing (also irexec). I have also tried to compile the lirc downloaded from the lirc web site but this fails with this: /home/reiner/download/lirc-0.8.6/drivers/lirc_dev/lirc_dev.h:185:3: error: implicit declaration of function ‘kfifo_get’ Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 5

[Bug 483414] Unable to switch from SCIM to SKIM
by bugzilla_noreply＠novell.com 07 Sep '10

07 Sep '10

https://bugzilla.novell.com/show_bug.cgi?id=483414 https://bugzilla.novell.com/show_bug.cgi?id=483414#c8 --- Comment #8 from Bob Peterson <homoludens1000(a)gmail.com> 2010-09-07 21:17:43 UTC --- I think we're all in agreement here, so let's close the thread. Thanks for the ibus info, Mark, I didn't know! Cheers, Robert -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 0

[Bug 623223] New: KDE Workspace exits unexpectedly when clicking lower bar in Firefox
by bugzilla_noreply＠novell.com 07 Sep '10

07 Sep '10

http://bugzilla.novell.com/show_bug.cgi?id=623223 http://bugzilla.novell.com/show_bug.cgi?id=623223#c0 Summary: KDE Workspace exits unexpectedly when clicking lower bar in Firefox Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: x86 OS/Version: openSUSE 11.3 Status: NEW Severity: Critical Priority: P5 - None Component: KDE4 Workspace AssignedTo: kde-maintainers(a)suse.de ReportedBy: cyrusdreams(a)freenet.de QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; de; rv:1.9.1.10) Gecko/20100506 SUSE/3.5.10-0.1.1 Firefox/3.5.10 When clicking one of the buttons of any Firefox extension (tested with "NoScript" and "CS Lite") the whole KDE session closes without furter message. I end up on the login screen. Reproducible: Always Steps to Reproduce: 1. install on IBM T41 laptop 2. open Firefox and install any extension 3. click on extension's button in the lower bar Actual Results: KDE workspace exits to login screen, session is closed without asking. Expected Results: use extension menu -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 9

[Bug 632424] New: KGpg not running
by bugzilla_noreply＠novell.com 07 Sep '10

07 Sep '10

https://bugzilla.novell.com/show_bug.cgi?id=632424 https://bugzilla.novell.com/show_bug.cgi?id=632424#c0 Summary: KGpg not running Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: x86-64 OS/Version: openSUSE 11.3 Status: NEW Severity: Normal Priority: P5 - None Component: KDE4 Applications AssignedTo: kde-maintainers(a)suse.de ReportedBy: Willy.Weisz(a)univie.ac.at QAContact: qa(a)suse.de Found By: --- Blocker: --- Created an attachment (id=383864) --> (http://bugzilla.novell.com/attachment.cgi?id=383864) strace of kgpg command-line call User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; de; rv:1.9.2.8) Gecko/20100723 SUSE/3.6.8-1.3 Firefox/3.6.8 Since upgrading to openSuSE 11.3 KGpg is not running anymore. gpg is installed. Actual version of KGpg: kgpg-4.4.4-3.5.x86_64. Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 6

[Bug 636139] New: Gwibber doesn't run
by bugzilla_noreply＠novell.com 07 Sep '10

07 Sep '10

https://bugzilla.novell.com/show_bug.cgi?id=636139 https://bugzilla.novell.com/show_bug.cgi?id=636139#c0 Summary: Gwibber doesn't run Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: x86 OS/Version: openSUSE 11.3 Status: NEW Severity: Major Priority: P5 - None Component: Maintenance AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: andoresu(a)hotmail.co.jp QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; es-ES; rv:1.9.2.8) Gecko/20100723 SUSE/3.6.8-0.1.1 Firefox/3.6.8 When I try to run "Gwibber" installed from openSUSE repository, it doesn't work. Reproducible: Always Steps to Reproduce: 1. Install Gwibber 2. Run Gwibber 3. Run from Gwibber from Terminal (in order to see the exit) When I run from terminal, this is what I get: andres@metabee:~> gwibber ** (gwibber:9649): WARNING **: Trying to register gtype 'WnckWindowState' as enum when in fact it is of type 'GFlags' ** (gwibber:9649): WARNING **: Trying to register gtype 'WnckWindowActions' as enum when in fact it is of type 'GFlags' ** (gwibber:9649): WARNING **: Trying to register gtype 'WnckWindowMoveResizeMask' as enum when in fact it is of type 'GFlags' Traceback (most recent call last): File "/usr/bin/gwibber", line 50, in <module> from gwibber import client File "/usr/lib/python2.6/site-packages/gwibber/client.py", line 3, in <module> import gtk, gobject, gwui, util, resources, actions, json, gconf File "/usr/lib/python2.6/site-packages/gwibber/gwui.py", line 12, in <module> from mako.template import Template File "/usr/lib/python2.6/site-packages/mako/template.py", line 11, in <module> from mako.lexer import Lexer File "/usr/lib/python2.6/site-packages/mako/lexer.py", line 10, in <module> from mako import parsetree, exceptions, util File "/usr/lib/python2.6/site-packages/mako/parsetree.py", line 9, in <module> from mako import exceptions, ast, util, filters File "/usr/lib/python2.6/site-packages/mako/filters.py", line 11, in <module> import markupsafe ImportError: No module named markupsafe -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1