June 2008 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 388623] New: PF_KEY can't work without ipv6 enable
by bugzilla_noreply＠novell.com 26 Feb '09

26 Feb '09

https://bugzilla.novell.com/show_bug.cgi?id=388623 Summary: PF_KEY can't work without ipv6 enable Product: openSUSE 11.0 Version: Beta 2 Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: bili(a)novell.com QAContact: kernel-maintainers(a)forge.provo.novell.com Found By: --- I use the novell-ipsec-tools for connecting the vpn server. https://bugzilla.novell.com//show_bug.cgi?id=381769 It works fine in 10.3 without ipv6 enable. In 11.0 beta2, it couldn't work when ipv6 disabled. It call the send api send to a PF_KEY socket. so = socket(PF_KEY, SOCK_RAW, PF_KEY_V2) if ((len = send(so, (void *)msg, (socklen_t)len, 0)) < 0) { __ipsec_set_strerror(strerror(errno)); return -1; } send is ok, but it receive the msg: Apr 29 18:32:18 Azi racoon: DEBUG: pfkey.c:232:pfkey_handler(): get pfkey UPDATE message Apr 29 18:32:18 Azi racoon: DEBUG2: plog.c:208:plogdump(): 02025d03 02000000 f561330f a5170000 Apr 29 18:32:18 Azi racoon: ERROR: pfkey.c:247:pfkey_handler(): pfkey UPDATE failed: Protocol not supported Apr 29 18:32:18 Azi racoon: DEBUG: pfkey.c:232:pfkey_handler(): get pfkey ADD message Apr 29 18:32:18 Azi racoon: DEBUG2: plog.c:208:plogdump(): 02035d03 02000000 f561330f a5170000 Apr 29 18:32:18 Azi racoon: ERROR: pfkey.c:247:pfkey_handler(): pfkey ADD failed: Protocol not supported and the pfkey_handler() call the recv, *lenp = recv(so, (caddr_t)&buf, sizeof(buf), MSG_PEEK); the recv's messsage structure from /usr/include/linux/pfkeyv2.h struct sadb_msg { uint8_t sadb_msg_version; uint8_t sadb_msg_type; uint8_t sadb_msg_errno; uint8_t sadb_msg_satype; uint16_t sadb_msg_len; uint16_t sadb_msg_reserved; uint32_t sadb_msg_seq; uint32_t sadb_msg_pid; } __attribute__((packed)); so from "02025d03 02000000 f561330f a5170000", the errno is 0x5d, it means EPROTONOSUPPORT. It's related to the esp4.ko, when I removed the esp4.ko in 10.3, then it prompt the same message: Protocol not support. When I enable the ipv6 in yast it works fine. And I found kernel load the esp4 and xfrm6_mode_tunnel, if disable ipv6, the kernel couldn't load the esp4, in my opinion it caused by not loading the xfrm6_mode_tunnel, so it received the error message. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 12

[Bug 234531] New: gigaset-frontend package not included
by bugzilla_noreply＠novell.com 26 Feb '09

26 Feb '09

https://bugzilla.novell.com/show_bug.cgi?id=234531 Summary: gigaset-frontend package not included Product: openSUSE 10.2 Version: Final Platform: All OS/Version: SuSE Other Status: NEW Severity: Enhancement Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: tilman(a)imap.cc QAContact: qa(a)suse.de Kernel 2.6.18 includes ISDN drivers for Siemens Gigaset SX255 family devices connected via USB. A package containing useful utilities for use with these devices is available from http://sourceforge.net/projects/gigaset307x/. I would like to suggest including this package in future openSUSE releases. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 7

[Bug 285607] New: Missing runtime dependency for package octave
by bugzilla_noreply＠novell.com 26 Feb '09

26 Feb '09

https://bugzilla.novell.com/show_bug.cgi?id=285607 Summary: Missing runtime dependency for package octave Product: openSUSE 10.2 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: christ.juergen(a)t-online.de QAContact: qa(a)suse.de Found By: --- Hi, typing for example "help plot" in the octave command shell displays texinfo source code if package texinfo is not installed. Package octave does not force this dependency, but I think it should do this. Texinfo source is not really useful for most people. Regards, Juergen -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 7

[Bug 404695] New: RTL8168C(P)/8111C(P) Family PCI-E Gigabit Ethernet NIC
by bugzilla_noreply＠novell.com 26 Feb '09

26 Feb '09

https://bugzilla.novell.com/show_bug.cgi?id=404695 Summary: RTL8168C(P)/8111C(P) Family PCI-E Gigabit Ethernet NIC Product: openSUSE 11.0 Version: Final Platform: x86-64 OS/Version: openSUSE 11.0 Status: NEW Severity: Blocker Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: andrew(a)joako.net QAContact: qa(a)suse.de Found By: Integration Test Upon booting the openSUSE 11.0 KDE livecd the RealTek RTL8168C(P)/8111C(P) Family PCI-E Gigabit Ethernet NIC does not detect any link. unable to obtain an IP address using dhclient. System is Gigabyte mainboard GA-MA78GM-S2H (rev.1.0), AMD 780G chipset. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 7

[Bug 400578] New: after s2ram s2disk module via-rhine not working
by bugzilla_noreply＠novell.com 26 Feb '09

26 Feb '09

https://bugzilla.novell.com/show_bug.cgi?id=400578 Summary: after s2ram s2disk module via-rhine not working Product: openSUSE 11.1 Version: Factory Platform: i686 OS/Version: openSUSE 11.0 Status: NEW Severity: Normal Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: fazerxlo(a)o2.pl QAContact: qa(a)suse.de Found By: --- This problem was on 10.3 and is in 11.0 after s2disk/s2ram network not working there is need to reload module to correct it -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 41

[Bug 363381] New: acroread 8.x hangs if used as plugin
by bugzilla_noreply＠novell.com 26 Feb '09

26 Feb '09

https://bugzilla.novell.com/show_bug.cgi?id=363381 Summary: acroread 8.x hangs if used as plugin Product: openSUSE 10.3 Version: Final Platform: x86-64 OS/Version: openSUSE 10.3 Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: wolfgang(a)rosenauer.org QAContact: qa(a)suse.de Found By: --- Since the update to acrobat 8.x everytime I open a PDF inside Firefox (or SeaMonkey) with the plugin, Acrobat does display the document correctly. But afterwards when browing away from the PDF acroread is still using quite some CPU (around 40% here, but somehow perceived as it was much more by jumping mouse cursor and so on). Killing the acroread process with SIGTERM stops the CPU usage but doesn't kill the process completely. Only SIGKILL really stops it. (Not even closing Firefox ends the process). My system is x86-64 and so the acrobat plugin is used through nspluginwrapper. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 46

[Bug 356580] New: vlan not working with forcedeth network card
by bugzilla_noreply＠novell.com 26 Feb '09

26 Feb '09

https://bugzilla.novell.com/show_bug.cgi?id=356580 Summary: vlan not working with forcedeth network card Product: openSUSE 10.3 Version: Final Platform: All OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: mhoppe(a)novell.com QAContact: qa(a)suse.de Found By: IS&T I tried to setup a vlan tagged network on a system with forcedeth network card but no data is received on the vlan interface. A tcpdump -e shows the data on the vlan but it is not recognized. On the other end I can see data in and out (e.g. arp replies). kernel: 2.6.22.13-0.3-default ifconfig: vlan10 Link encap:Ethernet HWaddr 00:19:66:54:D6:83 inet addr:192.168.2.1 Bcast:192.168.2.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:3 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:138 (138.0 b) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 9

[Bug 327510] New: r8169 no change of speed
by bugzilla_noreply＠novell.com 26 Feb '09

26 Feb '09

https://bugzilla.novell.com/show_bug.cgi?id=327510 Summary: r8169 no change of speed Product: openSUSE 10.3 Version: RC 1 Platform: x86 OS/Version: openSUSE 10.3 Status: NEW Severity: Normal Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: mbra(a)gmx.ch QAContact: qa(a)suse.de Found By: --- Hardware: Netgear GA511 (Gigabit PC Card) 16:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10) The module r8169.ko will be automatically loaded. The card works, but only at 100MBit, even when connected to a 1GBit Switch. Also it is not possible to change the speed with ethtool down to 10 or up to 1000 MBit. Also changing duplex and autoneg settings will be ignored. Example: ethtool -s eth1 speed 10 autoneg off duplex half ethtool eth1 Settings for eth1: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: Twisted Pair PHYAD: 0 Transceiver: internal Auto-negotiation: on Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000033 (51) Link detected: yes Nothing changed! Nothing added to /var/log/messages But when I use the old r1000 module instead (compiled the source), it works! Here the output when card is plugged in with r8169 Sep 22 20:44:24 ltmnb3 kernel: r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded Sep 22 20:44:24 ltmnb3 kernel: PCI: Enabling device 0000:16:00.0 (0000 -> 0003) Sep 22 20:44:24 ltmnb3 kernel: ACPI: PCI Interrupt 0000:16:00.0[A] -> GSI 16 (level, low) -> IRQ 16 Sep 22 20:44:24 ltmnb3 kernel: PCI: Setting latency timer of device 0000:16:00.0 to 64 Sep 22 20:44:24 ltmnb3 kernel: eth1: RTL8169sb/8110sb at 0xf8dd6000, 00:18:4d:71:89:c5, IRQ 16 Sep 22 20:44:24 ltmnb3 ifup: Network interface is managed from NetworkManager Sep 22 20:44:24 ltmnb3 ifup: NetworkManager will be advised to set up eth1 Sep 22 20:44:24 ltmnb3 ifup: but it cannot be assured from here. Sep 22 20:44:24 ltmnb3 kernel: r8169: eth1: link down Sep 22 20:44:26 ltmnb3 kernel: r8169: eth1: link up with r1000 Sep 22 20:46:06 ltmnb3 kernel: pccard: CardBus card inserted into slot 0 Sep 22 20:46:06 ltmnb3 kernel: PCI: Enabling device 0000:16:00.0 (0000 -> 0003) Sep 22 20:46:06 ltmnb3 kernel: ACPI: PCI Interrupt 0000:16:00.0[A] -> GSI 16 (level, low) -> IRQ 16 Sep 22 20:46:06 ltmnb3 kernel: PCI: Setting latency timer of device 0000:16:00.0 to 64 Sep 22 20:46:06 ltmnb3 kernel: eth1: Identified chip type is 'RTL8169SB/8110SB'. Sep 22 20:46:06 ltmnb3 kernel: eth1: r10001.05, the Linux device driver for Realtek Ethernet Controllers at 0xa000, 00:18:4d:71:89:c5, IRQ 16 Sep 22 20:46:06 ltmnb3 ifup: Network interface is managed from NetworkManager Sep 22 20:46:06 ltmnb3 ifup: NetworkManager will be advised to set up eth1 Sep 22 20:46:06 ltmnb3 ifup: but it cannot be assured from here. Sep 22 20:46:07 ltmnb3 kernel: Realtek RTL8169/8110 Family Gigabit Ethernet Network Adapter Sep 22 20:46:07 ltmnb3 kernel: Driver version:1.05 Sep 22 20:46:07 ltmnb3 kernel: Released date:2006/10/25 Sep 22 20:46:07 ltmnb3 kernel: Link Status:Not Linked Sep 22 20:46:07 ltmnb3 kernel: I/O Base:0xA000(I/O port) Sep 22 20:46:07 ltmnb3 kernel: IRQ:16 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 33

[Bug 354554] New: Hunspell as a system wide spellchecker
by bugzilla_noreply＠novell.com 26 Feb '09

26 Feb '09

https://bugzilla.novell.com/show_bug.cgi?id=354554 Summary: Hunspell as a system wide spellchecker Product: openSUSE 11.0 Version: unspecified Platform: Other OS/Version: Other Status: NEW Severity: Enhancement Priority: P5 - None Component: Development AssignedTo: pth(a)novell.com ReportedBy: kkemenczy(a)novell.com QAContact: qa(a)suse.de Found By: --- Why Hunspell? MySpell is not developed for quite a long time either in Mozilla and in OpenOffice.org. Hunspell is a fork of MySpell, it has great improvements is several ways, and fully backward compatible with MySpell. Main features: * Extended support for language peculiarities; Unicode character encoding, compounding and complex morphology. * Improved suggestion using n-gram similarity, rule and dictionary based pronounciation data. * Morphological analysis, stemming and generation. * Hunspell is based on MySpell and works also with MySpell dictionaries. * GPL/LGPL/MPL tri-license http://en.wikipedia.org/wiki/Hunspell http://hunspell.sourceforge.net/ Fedora project: http://fedoraproject.org/wiki/Releases/FeatureDictionary I also find a reference in the wishlist: http://en.opensuse.org/Wishlist_Various -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 33

[Bug 332942] New: Factory Non-OSS License Agreement specificies 10.3 still
by bugzilla_noreply＠novell.com 25 Feb '09

25 Feb '09

https://bugzilla.novell.com/show_bug.cgi?id=332942 Summary: Factory Non-OSS License Agreement specificies 10.3 still Product: openSUSE 11.0 Version: unspecified Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: jpr(a)novell.com QAContact: qa(a)suse.de Found By: --- Adding the factory non-oss repo in yast shows a license agreement for 10.3 still. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 6