September 2016 - openSUSE Users - openSUSE Mailing Lists

[opensuse] command at end of bootproces
by Hans de Faber 30 Sep '16

30 Sep '16

Using: Leap 42.1 At the end or somewhere else in the bootproces I want to run the command " cpupower frequency-set -g performance". What is the right method and place to do this ? Thanks, Hans -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 7

[opensuse] Ripping question: K3b or k9copy
by Anton Aylward 30 Sep '16

30 Sep '16

Regular readers will recall that I keep trying to convert my DVDs to .m4v files so I can put them on my tablet and read them away from my desk. My tablet doesn't have a DVD drive :-( I recently asked about problems I was having with some DVDs that Handbrake could not make sense of. I find that I can 'rip' them using K3b and with k9copy but I run into a problem with each. With K3b it seems I can't transcribe the subtitles. I also end up with a .avi rather than a .m4v With k9copy, despite the how-to that I find on the net (all of them) I can't produce a .m4v Instead I get a directory of all the individual chapters etc, sort of a like a transcription/copy of what's under the hood on the DVD. Well it is a 'copy'. I try converting that with ffmpeg and it crashes. I try converting that with handbrake and it hangs. That progress to date. Suggestions for what's next? -- A: Yes. > Q: Are you sure? >> A: Because it reverses the logical flow of conversation. >>> Q: Why is top posting frowned upon? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

9 41

[opensuse] suddenly lost all Internet connection
by linux＠daniel-bauer.com 29 Sep '16

29 Sep '16

Hello, I connected my leap 42.1/KDE laptop in a hotel to WiFi. It worked for approx 5 minutes then it suddenly disconnected and I find no way to connect again. I tried YAST network settings, switched to wicked and then back to networkmanager but on saving it says "error, no network". Rebooting did not help. I cannot select the WiFi icon in the applet. It is not the hotel WiFi. It works with my mobile phone and with the other laptops of other people here. My laptop doesn't see any WiFi, also not when I use my mobile as Hotspot (or how you call that). Please, where can I search for the reason? What can I do? Thanks for your help! Daniel -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 4

re: [opensuse] suddenly lost all Internet connection
by stakanov＠freenet.de 29 Sep '16

29 Sep '16

> -----Ursprüngliche Nachricht----- > Von: linux(a)daniel-bauer.com > Gesendet: Do. 29.09.2016 13:52 > An: opensuse(a)opensuse.org > Betreff: [opensuse] suddenly lost all Internet connection > > Hello, > > I connected my leap 42.1/KDE laptop in a hotel to WiFi. It worked for approx 5 minutes then it suddenly > disconnected and I find no way to connect again. > > I tried YAST network settings, switched to wicked and then back to networkmanager but on saving it says > "error, no network". Hi Daniel. I think you did run into this? https://bugzilla.opensuse.org/show_bug.cgi?id=978216 It helped me to follow the advice and I installed the 4.4 kernel from the indicated repo. The problem (otherwise frequent) did never happen again. If you have privoxy running you have another bug. There it helps to restart privoxy and you network will be back. But I think you did run into 978216. Cheers and good luck. --- Die Bundesliga hat begonnen! Alle Tore, alle Ergebnisse, alle News: Pocket Liga jetzt im https://app.adjust.com/dpynzd oder https://app.adjust.com/dpynzd herunterladen - kostenlos! -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] Trying to install LEAP from isoCD -- unable to access net -- but doesn't ask for proxy?
by Linda Walsh 27 Sep '16

27 Sep '16

I have a client behind a gateway that provides access to the internet only through a proxy. Many or most pieces of software (ex. MS Windows when needed to activate itself, or a PC game "X-Blades" when needing to activate), when, not able to directly connect to IP addresses they were searching for, asked for proxy settings (either to detect and use system settings or select manual input of the proxy). In both of those two cases, selected auto-detect, and both picked up the local web-proxy (both the dhcpd server and proxy autodetect via wpad are configured). I tried to configure Leap 42.2 to access remote SW-Depot, but it says it can't access it -- but it still isn't asking for how to access the internet (i.e., proxy settings) or auto-detecting them. I also don't see any listed option on how to set the proxy settings. It seems the installer isn't auto-detecting proxy settings even though it had to receive them as it got an address via dhcp -- which are configure to inform the client of local services, like www-server, among other. Why doesn't the installer automatically "fail-over" to asking for one like MSwin-activation does or a $15 game? Maybe more importantly where do I click to set the proxy? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 16

Re: [opensuse] rkhunter complains about CAPI - ekiga install at origin?
by stakanov＠freenet.de 27 Sep '16

27 Sep '16

> -----Ursprüngliche Nachricht----- > Von: Marcus Meissner > Gesendet: Di. 27.09.2016 12:46 > An: stakanov(a)freenet.de > Kopie: opensuse , > > ekiga is unrelated to CAPI I would say. CAPI is something ISDN specificy usually? > > Ciao, Marcus > -- > To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org > To contact the owner, e-mail: opensuse+owner(a)opensuse.org > > > > -----Ursprüngliche Nachricht Ende----- Well, I tried to do a phone call via VOIP from VOIP to Fix and it did not work. Maybe the system tried to find a umts modem or a isdn phone? The the entry "CAPI" would make sense (would be a bug still, it should have called using the provider of service connected to). --- Die Bundesliga hat begonnen! Alle Tore, alle Ergebnisse, alle News: Pocket Liga jetzt im https://app.adjust.com/dpynzd oder https://app.adjust.com/dpynzd herunterladen - kostenlos! -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] rkhunter complains about CAPI - ekiga install at origin?
by stakanov＠freenet.de 27 Sep '16

27 Sep '16

Rkhunter complains about: Warning: Suspicious file types found in /dev: /dev/shm/CAPI20_shared_memory.v01000010: data /dev/shm/sem.CAPI20_shared_sem.v01000010: data I did tentatively install ekiga on my system. Can this be at the origin? Thanks. --- Die Bundesliga hat begonnen! Alle Tore, alle Ergebnisse, alle News: Pocket Liga jetzt im https://app.adjust.com/dpynzd oder https://app.adjust.com/dpynzd herunterladen - kostenlos! -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] TW - different paste buffer for vi?
by Per Jessen 27 Sep '16

27 Sep '16

I have a single TW system that I use for some infrequent testing. Yesterday I updated to the latest TW. In 'vi', when I click the middle mouse button (paste), I get textA pasted. If I leave vi, and I click the middle mouse button (paste), I get textB pasted. Surely that's not right? -- Per Jessen, Zürich (15.4°C) http://www.hostsuisse.com/ - dedicated server rental in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 5

[opensuse] How to open .ymp files from command line?
by L. A. Walsh 26 Sep '16

26 Sep '16

I looked for a version of inkscape and landed on this page: https://software.opensuse.org/package/inkscape It offered to let me "install it now" by downloading it with a .ymp extension. The page doesn't seem to offer other download formats, but the .ymp was to "install now" (from my windows browser? hmmm).. So I saved it so I could open and install it on my linux box. However, how do I open it or use it as an installation source? Usually I try to save an install file to disk before "executing" it. So how do I open it from the cmd line? Thanks! -l -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 12

[opensuse] KDE4 screen saver doesn't start
by Istvan Gabor 26 Sep '16

26 Sep '16

Hello: This is on openSUSE 13.1 with its default KDE4 desktop. I have a graphical program that must be running continuously. It has a window which can be maximized or minimized to the panel. When this program is running KDE4 doesn't start the screen saver. If the program isn't running the screen saver works normally. What can be the cause that prevents the activation of the screen saver? Is there an option in KDE4 to change this? Thanks, Istvan -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 4