September 2023 - openSUSE Users - openSUSE Mailing Lists

[opensuse] Project management software question for project managers
by Ted Byers 15 Apr '24

15 Apr '24

I am looking for project management software I can install on my Suse box. Alas, there are quite a number of prducts that claim to be suitable project management products, but I am hoping to obtain a little help separating the wheat from the chaffe. Basically, when I open the project management software, I want to be able to choose from among a number of projects that are under way, and then see the relation between a client's wish list and the functional requirements specs, and then how these specs relate to the UML diagrams that have been created, and from there, what tasks have been defined for each requirement and the identity of all persons involved, the developers and their managers, and the person who designed the code that supports the requirement. And with that, I want to be able to see the project's timeline, the related bugs, &c. I would even want to be able to open the source code files and examine the code that was actually written. Here is my wish list: 1) a web application that stores data in either PostgreSQL or MySQL. 2) easy integration with UML tool (or has it's own UML tool that supports round trip engineering) 3) resource management (e.g. computers, and development tools, that can be used, personelle assigned to each task) 4) documentation of relation between functional requirements specs to specific tasks and specific unit and integration tests. 5) time/effort tracking 6) bug tracking, including data relating the existance of the bug, and effort required to fix it, to the person who wrote the original code, the person who supervised him or her, and the person who designed the 'feature' in question, the time taken to complete the original task, and the technologies used (to imprrove accountability as well as to determine retraining and continuing education needs (people aren't disposable, so instead of taking a harsh aproach to problems identified, I prefer to use education as a corrective, but I can't design corrective instruction without knowing precisely what the need is). I also need to know if a developer has a higher than normal bug rate simply because he doesn't take enough time to ensure the job is done right, or because I haven't adequately trained him, or because of a poor choice of tools, or somethng else that may be my fault. 7) use of task effort tracking history to generate provisional effort/cost estimates from new project's functional requirements 8) easy integration with open source ERP products like OFBiz (which may make trakcing resources and manpower easier, as well as connect real production data to the enterprise's accounting systems) 9) easy integration with CMS products, like Wordpress (especally for production documentation, includng degin documentation and user guides and reference manuals) 10) easy integration with verion control systems such as subversion. If there is a decent product that supports all of this, great (and language used to implement it doesn't matter), but if I have to write code to add missing requirements, then I am limited to those implemented using Perl or Java (and running on Tomcat). I don't know PHP well enough, and I don't know Ruby at all; and I really don't want to think about implementing this sort of thing in C++ (though I could if absolutely necessary). If you have project management experience, and use tools that are available for Suse Linux, what software product(s) did you use, and with what result? While I await relies, I will continue to review web documentation for those products I have found so far, to see if any of them are a) suitable for use in production and b) to see to what extent they support the features I am after. I have seen a number of products so far in my search, that deserve to be nameless, because they provide no way to relate cost estimates to one's team's track record, or to the details of the design, and seem satisfied with production of a pretty gantt chart (which is why I have formed the view that there is a whole lots of chaffe in the set of applications that call themselves project menement software - I have yet to find anything that really has the potential of being labelled wheat). Thanks Ted -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 4

[SLE] RealPlayer G2 on SuSe 6.2
by yh＠ottawa.com 03 Apr '24

03 Apr '24

Yesterday, I finally got sound going on my Linux setup. I downloaded RealPlayer G2 and it worked beautifully. Today, RealPlayer run but no sound coming out. All other sound functions still work. I can still play my CD, have system sound BUT no sound when I run RealPlayer. /var/log/message said kernel: Sound: DMA (output) timed out - IRQ/DRQ config error? but KDE sound still work. I have re-installed RealPlayer 3 times now, still no sound when I run the RealPlayer. Any help is appreciated. Ying yh(a)ottawa.com -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

3 2

No Login, no Graphics after update to Tumbleweed 20230211-0
by Peter Maffter 30 Mar '24

30 Mar '24

Hello, after the update the screen only shows a '-'. All the usual other tty screens that you get with e.g. STRG-ALT-F1 are also gone. I can connect to the PC via ssh from my Ubuntu Laptop and check what is going on. I am using an old GTX 570 on that PC. Previously when the G06 stuff was installed instead of updating the needed G04 stuff, I was able to install NVIDIA-Linux-x86_64-390.157.run manually and the login and XFCE worked. But now even that fails. :-( Any pointers? Is that the beginning of the things that are named in Subject "Nvidia 390x driver users - glibc 2.37 will bring bad news" ? I do have strange output about signature and verification: 2023-02-13T00:08:13.628957+01:00 machine4 kernel: [ 3.411047][ T527] nvidia: loading out-of-tree module taints kernel. 2023-02-13T00:08:13.628957+01:00 machine4 kernel: [ 3.411690][ T527] nvidia: module license 'NVIDIA' taints kernel. 2023-02-13T00:08:13.628958+01:00 machine4 kernel: [ 3.412304][ T527] Disabling lock debugging due to kernel taint 2023-02-13T00:08:13.628958+01:00 machine4 kernel: [ 3.418769][ T527] nvidia: module verification failed: signature and/or required key missing - tainting kernel 2023-02-13T00:08:13.628963+01:00 machine4 kernel: [ 3.426827][ T538] tg3 0000:0d:00.0 eth0: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address 00:25:22:e6:5d:d3 2023-02-13T00:08:13.628964+01:00 machine4 kernel: [ 3.427483][ T538] tg3 0000:0d:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) 2023-02-13T00:08:13.628964+01:00 machine4 kernel: [ 3.428122][ T538] tg3 0000:0d:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] 2023-02-13T00:08:13.628965+01:00 machine4 kernel: [ 3.428740][ T538] tg3 0000:0d:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] 2023-02-13T00:08:13.628965+01:00 machine4 kernel: [ 3.482616][ T527] nvidia-nvlink: Nvlink Core is being initialized, major device number 241 2023-02-13T00:08:13.628966+01:00 machine4 kernel: [ 3.488784][ T527] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem 2023-02-13T00:08:13.628971+01:00 machine4 kernel: [ 3.489637][ T527] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 390.157 Wed Oct 12 09:19:07 UTC 2022 (using threaded interrupts) 2023-02-13T00:08:13.628972+01:00 machine4 kernel: [ 3.499362][ T527] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 390.157 Wed Oct 12 09:15:25 UTC 2022 2023-02-13T00:08:13.628972+01:00 machine4 kernel: [ 3.505733][ T527] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver 2023-02-13T00:08:13.628973+01:00 machine4 kernel: [ 3.506428][ T527] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 1 Update openSUSE Tumbleweed 20230211-0 -> 20230212-0 did not help either. Boot to the recover modes of 6.1.10-1 or 6.1.8-1 does not help . 6.1.8-1 recovery at least says that "Failed to start X Display Manager" and gives the F1,F2,...ttys. but when I install NVIDIA-Linux-x86_64-390.157.run the F1,F2, ttys are also gone. Please help. Thanks in advance BR Pete

12 68

[oS-en] iotop complains of missing feature in kernel
by Carlos E. R. 18 Feb '24

18 Feb '24

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 cer@Telcontar:~> sudo /usr/sbin/iotop -o -d 3.3333 Total DISK READ : 1169.77 K/s | Total DISK WRITE : 12.79 K/s Actual DISK READ: 1168.61 K/s | Actual DISK WRITE: 48.84 K/s TID PRIO USER DISK READ DISK WRITE SWAPIN IO> COMMAND 2041 be/4 news 490.70 K/s 0.00 B/s ?unavailable? texpire 9622 be/4 cer 0.00 B/s 6.98 K/s ?unavailable? firefox --sm-client-id 27~-9abbeba61260 [LS Thread] 8039 idle cer 679.07 K/s 0.00 B/s ?unavailable? tracker-miner-fs-3 12912 be/4 cer 0.00 B/s 5.81 K/s ?unavailable? firefox --sm-client-id 27~beba61260 [IndexedDB #45] * * ... CONFIG_TASK_DELAY_ACCT not enabled in kernel, cannot determine SWAPIN and IO % cer@Telcontar:~> uname -a Linux Telcontar 5.14.21-150400.24.33-default #1 SMP PREEMPT_DYNAMIC Fri Nov 4 13:55:06 UTC 2022 (76cfe60) x86_64 x86_64 x86_64 GNU/Linux cer@Telcontar:~> - -- Cheers Carlos E. R. (from 15.4 x86_64 at Telcontar) -----BEGIN PGP SIGNATURE----- iHoEARECADoWIQQZEb51mJKK1KpcU/W1MxgcbY1H1QUCY850Sxwccm9iaW4ubGlz dGFzQHRlbGVmb25pY2EubmV0AAoJELUzGBxtjUfVjxsAnREQY/RUTyYZuN8ZczMy KHE36e4GAJ9E6Pia/flb5Of5gQuYU1S9i0oirA== =W0vq -----END PGP SIGNATURE-----

2 3

Best 3D level based racing game on PC.
by Wisoky Salma 10 Feb '24

10 Feb '24

[Drift Boss](https://drift-boss.pro) is a famous drifting game. In the game, you will have the opportunity to control your car on endless roads full of difficult turns and collisions. The game sounds simple but it takes a lot of practice to be able to drift well around corners. Join the game now to prove that you are the best racer and score the most points.

3 2

Creating a new user for a deamon
by Rowan Reid 15 Jan '24

15 Jan '24

I'm setting up a cron job for a analysis tool, I'm trying to use the SuSE tools where possible but YAST doent' allow you to create new user without a home I tried /dev/null is there a proper way to do this ? Rowan Reid Job Captain, Systems Administrator STUDIO 3 ARCHITECTS 909 982 1717

3 2

Copy and Paste does not work while installing programs
by Per Inge Oestmoen 11 Dec '23

11 Dec '23

Hello all! I have four machines here, all with openSUSE Leap 15.4. With three of them there are no particular problems, but with the one I am using now there is a consistent, reproducible error: When I am installing a number of programs, I normally copy my password when installing the first in the row. Then, it is easy to paste in the same password for each successive installation. However, with this machine that is impossible. I copy the password, but after I have exited the dialog box the copied password is erased from memory and I have to type the password each time when doing the subsequent installations. Further; as long as I have the dialog box open the password copied is kept in memory and can be pasted into a document I made to test this, but when I close the dialog box in order to go to Yast2 the password is evidently erased since it then cannot be pasted into the document. It is gone, but on my other machines it is kept in memory and can be pasted into the dialog box. See the attached screen shot; that is where it happens. What configuration error have I inadvertently made, since the password is not kept in memory on this one machine? Sincerely, Per Inge Oestmoen, Norway

2 1

keyboard becomes extremely slow
by mh＠mike.franken.de 26 Nov '23

26 Nov '23

Hi *, for some time now I have a problem with the keyboard on my notebook. It becomes extremely slow, i.e. only one or two keypresses are shown every 10 seconds. Special keyboard shortcuts like Alt-F4 or Ctrl-F5 are working as expected. Switching to a Linux console with Ctrl-Alt-[0-9] is still working, too. In the Linux console typing works without any problems then. Switching back to KDE again/still shows the problem. The only "solution" I found is to logout and login. For a while the keyboard then works as expected, until the same problem reoccurs. The intervals the problem shows up vary between once an evening to every 10 minutes. It happens in all programs one can type anything, i.e. OO Writer, graphical terminals or even dialog boxes of any kind. It happens with the internal notebook keyboard and also with an external USB keyboard. Machine: Type: Convertible System: Dell product: XPS 13 9310 2-in-1 v: N/A ´ openSUSE Tumbleweed 20230509 Any idea, what the reason might be and what to do against it? TIA. Bye. Michael.

10 49

Tumbleweed Doesn't Always Shut Down
by Mark Misulich 27 Oct '23

27 Oct '23

Hi, I've had a problem with my desktop computer for some months, in that it doesn't always shut down completely with opensuse. That is, it's an intermittent problem. The computer is set up as a multiboot, and does always shut down when I shut down Windows. Here are the specs for opensuse and the computer. I'm running: opensuse Tumbleweed 20230819 KDE Plasma Version 5.27.7 KDE Frameworks Version 5.109.0 Qt Version 5.15.10 Kernel Version 6.4.11-1-default (64-bit) Graphics Platform X11 Hardware Processors 8 x Intel Core i7-7700 CPU @ 3.60GHz Memory 62.7 GiB of RAM Graphics Processor Nvidia GeForce GT 1030/PCIe/SSE2 Manufacturer Gigabyte Technology Co. Ltd. Product Name B250M-DS3H I tried to run this by the forum to get some answers, and you can see that they haven't been able to figure it out. Here's the hyperlink to the thread: https://forums.opensuse.org/t/tumbleweed-wont-shut-down/166098/31 I would appreciate the list's help to try and resolve this issue. Thanks, Mark

7 19

Recommended docker tutorial for working with large web packages?
by David C. Rankin 03 Oct '23

03 Oct '23

All, Does anyone have a favorite link that explains the "midlevel" management of large web projects with docker. I have searched and read, but I seem to be just getting disjointed bits of basic how to or being stuck in the full docker.com reference. I have the basics, I can pull, attach, detach, exec, restart, manage IDs, for normal single apps, etc..., but I'm flummoxed trying to sort out and get eGroupware configured and running in docker with docker-compose and the 10 other apps it pulls in, collabra, rocketchat, swoolepush, etc... docker compose pulls everything and sets it up and running, but all I can get back from nginx over :8080 is "I'm working, but the page has permanently moved..." Nothing on the other exported port of :4443. So far I've ended up with 5 source trees of eGroupware in /var/lib/docker/... in 4 volumes and 1 overlay for the various configs I've tried with intervening 'docker compose up' and 'docker compose down'. Worth a chance to ask if someone has a favorite link or howto that discusses docker at that level that not on page 227 of the full manual. (yes, I would use the opensuse package, but the server I'm working with is running Arch, and all the egroupware folks cater to in their howto's is Ubuntu -- though why it matters for a container is odd, but it does, and unfortunately the traditional egroupware web-install is no longer actively supported - while it still works it quite flaky due to push-notifications replacing normal Ajax or js page update and the push implemented only works within the container.) Any suggestions welcomed, in the meantime I'll keep plowing through the docker.com reference material... Oh joy... -- David C. Rankin, J.D.,P.E.

1 1