November 2008 - YaST Commits - openSUSE Mailing Lists

[yast-commit] r52876 - in /trunk/scanner: VERSION package/yast2-scanner.changes src/Scanner.ycp src/dialogs.ycp src/scanner.ycp
by jsmeix＠svn.opensuse.org 04 Nov '08

04 Nov '08

Author: jsmeix Date: Tue Nov 4 12:42:48 2008 New Revision: 52876 URL: http://svn.opensuse.org/viewcvs/yast?rev=52876&view=rev Log: - V 2.17.2 - Removed the "Back" button from the Overview dialog and renamed other buttons according to new style guide by manually overwriting the Wizard module defaults (see Novell/Suse Bugzilla bnc#440560 comment #5). - Replaced Report with Popup and used Popup::ErrorDetails to show stderr when commands failed (without any change for translated texts). Modified: trunk/scanner/VERSION trunk/scanner/package/yast2-scanner.changes trunk/scanner/src/Scanner.ycp trunk/scanner/src/dialogs.ycp trunk/scanner/src/scanner.ycp Modified: trunk/scanner/VERSION URL: http://svn.opensuse.org/viewcvs/yast/trunk/scanner/VERSION?rev=52876&r1=528… ============================================================================== --- trunk/scanner/VERSION (original) +++ trunk/scanner/VERSION Tue Nov 4 12:42:48 2008 @@ -1 +1 @@ -2.17.1 +2.17.2 Modified: trunk/scanner/package/yast2-scanner.changes URL: http://svn.opensuse.org/viewcvs/yast/trunk/scanner/package/yast2-scanner.ch… ============================================================================== --- trunk/scanner/package/yast2-scanner.changes (original) +++ trunk/scanner/package/yast2-scanner.changes Tue Nov 4 12:42:48 2008 @@ -1,4 +1,16 @@ ------------------------------------------------------------------- +Tue Nov 4 09:17:52 CET 2008 - jsmeix(a)suse.de + +- V 2.17.2 +- Removed the "Back" button from the Overview dialog + and renamed other buttons according to new style guide + by manually overwriting the Wizard module defaults + (see Novell/Suse Bugzilla bnc#440560 comment #5). +- Replaced Report with Popup and used Popup::ErrorDetails + to show stderr when commands failed (without any change + for translated texts). + +------------------------------------------------------------------- Wed Sep 10 16:20:00 CEST 2008 - jsmeix(a)suse.de - V 2.17.1 @@ -12,10 +24,10 @@ - V 2.17.0 - Applied proofread texts. - Enforce a safe environment for ExecuteBashCommand. -- Added an translateble error message to DetermineActiveScanners +- Added an translatable error message to DetermineActiveScanners if there is no response from the 'scanimage' command (see V 2.16.9 and Novell/Suse Bugzilla bnc#387555). -- Added an translateble message to SetScannerAccessPermissions +- Added an translatable message to SetScannerAccessPermissions if HAL does not know about the scanner (see V 2.16.7 and Novell/Suse Bugzilla bnc#340173). Modified: trunk/scanner/src/Scanner.ycp URL: http://svn.opensuse.org/viewcvs/yast/trunk/scanner/src/Scanner.ycp?rev=5287… ============================================================================== --- trunk/scanner/src/Scanner.ycp (original) +++ trunk/scanner/src/Scanner.ycp Tue Nov 4 12:42:48 2008 @@ -16,8 +16,6 @@ textdomain "scanner"; import "Progress"; -import "Report"; -import "Summary"; import "Popup"; import "Package"; import "Label"; @@ -366,10 +364,13 @@ { return "not installed"; } if( ! ExecuteBashCommand( "/bin/rpm -q " + package_name + " | /usr/bin/tr -d '\n'" ) ) - { Report::Error( sformat( // Message of a Report::Error where %1 will be replaced by the package name. - // Only a simple message because this error does not happen on a normal system - // (i.e. a system which is not totally broken or totally messed up). - _("Failed to determine the version of package %1."), package_name ) ); + { Popup::ErrorDetails( sformat( // Message of a Popup::ErrorDetails where %1 will be replaced by the package name. + // Only a simple message because this error does not happen on a normal system + // (i.e. a system which is not totally broken or totally messed up). + _("Failed to determine the version of package %1."), package_name + ), + result["stderr"]:"" + ); } return result["stdout"]:"failed to determine"; } @@ -389,7 +390,7 @@ boolean TestAndInstallPackage( string package_name ) { // First of all the multi-line string because such strings cannot be indented: string iscan_message = - // Message of a Report::Error + // Message of a Popup::Error // Do not change or translate "iscan", it is a package name. // Do not change or translate "i386", it is an architecture name. _("The package iscan should be installed @@ -439,7 +440,7 @@ if( Arch::x86_64() ) { iscan_message = iscan_message + "\n" + iscan_64bit_message; } - Report::Error( iscan_message ); + Popup::Error( iscan_message ); return false; } // Is the package available to be installed? @@ -447,33 +448,33 @@ boolean package_available = Package::Available( package_name ); if( nil == package_available ) { y2milestone( "Required package %1 is not installed and there is no package repository available.", package_name ); - Report::Error( sformat( // Message of a Report::Error where %1 will be replaced by the package name: - _("Required package %1 is not installed and there is no package repository available."), - package_name - ) + Popup::Error( sformat( // Message of a Popup::Error where %1 will be replaced by the package name: + _("Required package %1 is not installed and there is no package repository available."), + package_name + ) ); return false; } if( ! package_available ) { y2milestone( "Required package %1 is not installed and not available in the repository.", package_name ); - Report::Error( sformat( // Message of a Report::Error where %1 will be replaced by the package name: - _("Required package %1 is not installed and not available in the repository."), - package_name - ) + Popup::Error( sformat( // Message of a Popup::Error where %1 will be replaced by the package name: + _("Required package %1 is not installed and not available in the repository."), + package_name + ) ); return false; } if( ! Package::Install( package_name ) ) { y2milestone( "Failed to install required package %1.", package_name ); - Report::Error( // Message of a Report::Error where %1 will be replaced by the package name. - // Only a simple message because: - // Either the user has explicitely rejected to install the package, - // or this error does not happen on a normal system - // (i.e. a system which is not totally broken or totally messed up). - sformat( _("Failed to install required package %1."), - package_name - ) - ); + Popup::Error( // Message of a Popup::Error where %1 will be replaced by the package name. + // Only a simple message because: + // Either the user has explicitely rejected to install the package, + // or this error does not happen on a normal system + // (i.e. a system which is not totally broken or totally messed up). + sformat( _("Failed to install required package %1."), + package_name + ) + ); return false; } return true; @@ -490,7 +491,7 @@ boolean DetermineActiveScanners() { // First of all the multi-line strings because such strings cannot be indented: string no_response_from_scanimage_message = - // Message of a Report::Error when there is no response from the 'scanimage' command. + // Message of a Popup::Error when there is no response from the 'scanimage' command. // Do not change or translate "net", it is a metadriver name. // Do not simply use "driver" because net is no normal driver but a metadriver. // Do not change or translate "scanimage -L", it is a fixed command. @@ -510,40 +511,39 @@ // so that it was killed after a timeout (usually 60 seconds). // Do not show result["stderr"] which is the same as // the no_response_from_scanimage_message but untranslated: - Report::Error( no_response_from_scanimage_message ); + Popup::Error( no_response_from_scanimage_message ); return false; } - Report::Error( // Message of a Report::Error. - // Only a simple message because this error does not happen on a normal system - // (i.e. a system which is not totally broken or totally messed up). - // Do not confuse this error with the case when no active scanner was determined. - // The latter results no error. - _("Failed to determine the active scanners.") - + "\n" - + OnlyMeaningfulErrorMessage( result["stderr"]:"" ) - ); + Popup::ErrorDetails( // Message of a Popup::ErrorDetails. + // Only a simple message because this error does not happen on a normal system + // (i.e. a system which is not totally broken or totally messed up). + // Do not confuse this error with the case when no active scanner was determined. + // The latter results no error. + _("Failed to determine the active scanners."), + result["stderr"]:"" + ); return false; } if( -1 == SCR::Read( .target.size, active_scanners_filename ) ) { y2milestone( "Error: %1: file does not exist.", active_scanners_filename ); - Report::Error( sformat( // Message of a Report::Error where %1 will be replaced by the file name. - // Only a simple message because this error does not happen on a normal system - // (i.e. a system which is not totally broken or totally messed up). - _("File %1 does not exist."), - active_scanners_filename - ) + Popup::Error( sformat( // Message of a Popup::Error where %1 will be replaced by the file name. + // Only a simple message because this error does not happen on a normal system + // (i.e. a system which is not totally broken or totally messed up). + _("File %1 does not exist."), + active_scanners_filename + ) ); return false; } active_scanners = (list< map< string, string > >)SCR::Read( .target.ycp, active_scanners_filename ); if( nil == active_scanners ) { y2milestone( "Error: Failed to read %1", active_scanners_filename ); - Report::Error( sformat( // Message of a Report::Error where %1 will be replaced by the file name. - // Only a simple message because this error does not happen on a normal system - // (i.e. a system which is not totally broken or totally messed up). - _("Failed to read %1."), - active_scanners_filename - ) + Popup::Error( sformat( // Message of a Popup::Error where %1 will be replaced by the file name. + // Only a simple message because this error does not happen on a normal system + // (i.e. a system which is not totally broken or totally messed up). + _("Failed to read %1."), + active_scanners_filename + ) ); active_scanners = []; return false; @@ -562,35 +562,36 @@ */ boolean DetermineActiveBackends() { if( ! ExecuteBashCommand( determine_active_scanner_backends_commandline ) ) - { Report::Error( // Message of a Report::Error. - // Only a simple message because this error does not happen on a normal system - // (i.e. a system which is not totally broken or totally messed up). - // Do not confuse this error with the case when no active driver was determined. - // The latter results no error. - _("Failed to determine the active drivers.") - ); + { Popup::ErrorDetails( // Message of a Popup::ErrorDetails. + // Only a simple message because this error does not happen on a normal system + // (i.e. a system which is not totally broken or totally messed up). + // Do not confuse this error with the case when no active driver was determined. + // The latter results no error. + _("Failed to determine the active drivers."), + result["stderr"]:"" + ); return false; } if( -1 == SCR::Read( .target.size, active_backends_filename ) ) { y2milestone( "Error: %1: file does not exist.", active_backends_filename ); - Report::Error( sformat( // Message of a Report::Error where %1 will be replaced by the file name. - // Only a simple message because this error does not happen on a normal system - // (i.e. a system which is not totally broken or totally messed up). - _("File %1 does not exist."), - active_backends_filename - ) + Popup::Error( sformat( // Message of a Popup::Error where %1 will be replaced by the file name. + // Only a simple message because this error does not happen on a normal system + // (i.e. a system which is not totally broken or totally messed up). + _("File %1 does not exist."), + active_backends_filename + ) ); return false; } active_backends = (list< string >)SCR::Read( .target.ycp, active_backends_filename ); if( nil == active_backends ) { y2milestone( "Error: Failed to read %1", active_backends_filename ); - Report::Error( sformat( // Message of a Report::Error where %1 will be replaced by the file name. - // Only a simple message because this error does not happen on a normal system - // (i.e. a system which is not totally broken or totally messed up). - _("Failed to read %1."), - active_backends_filename - ) + Popup::Error( sformat( // Message of a Popup::Error where %1 will be replaced by the file name. + // Only a simple message because this error does not happen on a normal system + // (i.e. a system which is not totally broken or totally messed up). + _("Failed to read %1."), + active_backends_filename + ) ); active_backends = []; return false; @@ -610,35 +611,36 @@ */ boolean AutodetectScanners() { if( ! ExecuteBashCommand( autodetect_scanners_commandline ) ) - { Report::Error( // Message of a Report::Error. - // Only a simple message because this error does not happen on a normal system - // (i.e. a system which is not totally broken or totally messed up). - // Do not confuse this error with the case when no scanner was autodetected. - // The latter results no error. - _("Failed to detect scanners automatically.") - ); + { Popup::ErrorDetails( // Message of a Popup::ErrorDetails. + // Only a simple message because this error does not happen on a normal system + // (i.e. a system which is not totally broken or totally messed up). + // Do not confuse this error with the case when no scanner was autodetected. + // The latter results no error. + _("Failed to detect scanners automatically."), + result["stderr"]:"" + ); return false; } if( -1 == SCR::Read( .target.size, autodetected_scanners_filename ) ) { y2milestone( "Error: %1: file does not exist.", autodetected_scanners_filename ); - Report::Error( sformat( // Message of a Report::Error where %1 will be replaced by the file name. - // Only a simple message because this error does not happen on a normal system - // (i.e. a system which is not totally broken or totally messed up). - _("File %1 does not exist."), - autodetected_scanners_filename - ) + Popup::Error( sformat( // Message of a Popup::Error where %1 will be replaced by the file name. + // Only a simple message because this error does not happen on a normal system + // (i.e. a system which is not totally broken or totally messed up). + _("File %1 does not exist."), + autodetected_scanners_filename + ) ); return false; } autodetected_scanners = (list< map< string, string > >)SCR::Read( .target.ycp, autodetected_scanners_filename ); if( nil == autodetected_scanners ) { y2milestone( "Error: Failed to read %1", autodetected_scanners_filename ); - Report::Error( sformat( // Message of a Report::Error where %1 will be replaced by the file name. - // Only a simple message because this error does not happen on a normal system - // (i.e. a system which is not totally broken or totally messed up). - _("Failed to read %1."), - autodetected_scanners_filename - ) + Popup::Error( sformat( // Message of a Popup::Error where %1 will be replaced by the file name. + // Only a simple message because this error does not happen on a normal system + // (i.e. a system which is not totally broken or totally messed up). + _("Failed to read %1."), + autodetected_scanners_filename + ) ); autodetected_scanners = []; return false; @@ -855,11 +857,12 @@ else { Popup::ClearFeedback(); } - Report::Error( // Message of a Report::Error. - // Only a simple message because this error does not happen on a normal system - // (i.e. a system which is not totally broken or totally messed up). - _("Aborting: Failed to create the scanner database.") - ); + Popup::ErrorDetails( // Message of a Popup::ErrorDetails. + // Only a simple message because this error does not happen on a normal system + // (i.e. a system which is not totally broken or totally messed up). + _("Aborting: Failed to create the scanner database."), + result["stderr"]:"" + ); return false; } if( progress_feedback ) @@ -893,12 +896,12 @@ database = (list< map< string, string > >)SCR::Read( .target.ycp, database_filename ); if( database == nil ) { y2milestone( "Aborting: Failed to read %1", database_filename ); - Report::Error( sformat( // Message of a Report::Error where %1 will be replaced by the file name. - // Only a simple message because this error does not happen on a normal system - // (i.e. a system which is not totally broken or totally messed up). - _("Aborting: Failed to read %1."), - database_filename - ) + Popup::Error( sformat( // Message of a Popup::Error where %1 will be replaced by the file name. + // Only a simple message because this error does not happen on a normal system + // (i.e. a system which is not totally broken or totally messed up). + _("Aborting: Failed to read %1."), + database_filename + ) ); return false; } @@ -1052,7 +1055,7 @@ global boolean RunHpsetup() { // First of all the multi-line strings because such strings cannot be indented: string ptal_in_use_conflict_message = - // Message of a Report::Error when hp-setup should be run. + // Message of a Popup::Error when hp-setup should be run. // Do not change or translate "ptal", it is a service name. // Do not change or translate "hp-setup", it is a program name. // Do not change or translate "HPLIP", it is a subsystem name. @@ -1064,7 +1067,7 @@ and start the scanner configuration again afterwards. "); string displaytest_failed_message = - // Message of a Report::Error when hp-setup should be run. + // Message of a Popup::Error when hp-setup should be run. // Do not change or translate "hp-setup", it is a program name: _("Cannot run hp-setup because no graphical display can be opened. This happens in particular when YaST runs in text-only mode, @@ -1081,7 +1084,7 @@ Should the hplip package be installed? "); string hpsetup_not_executable_message = - // Message of a Report::Error when hp-setup should be run. + // Message of a Popup::Error when hp-setup should be run. // Do not change or translate "hp-setup", it is a program name: _("Cannot run hp-setup because /usr/bin/hp-setup is not executable @@ -1095,7 +1098,7 @@ "); if( DependantPrintQueueExists( "hpoj" ) ) { y2milestone( "Error: hp-setup is not launched because of conflict: PTAL is in use by a CUPS queue." ); - Report::Error( ptal_in_use_conflict_message ); + Popup::Error( ptal_in_use_conflict_message ); return false; } if( ! ExecuteBashCommand( "/usr/lib/YaST2/bin/displaytest" ) ) @@ -1113,7 +1116,7 @@ // so that a few xorg-x11-lib* packages (xorg-x11-libX11, xorg-x11-libxcb, xorg-x11-libXau) // are enforced by RPM to be installed. y2milestone( "Error: hp-setup is not launched because /usr/lib/YaST2/bin/displaytest failed." ); - Report::Error( displaytest_failed_message ); + Popup::Error( displaytest_failed_message ); return false; } if( "not installed" == actual_environment["hplip_version"]:"not installed" @@ -1131,7 +1134,7 @@ } if( ! ExecuteBashCommand( "test -x /usr/bin/hp-setup" ) ) { y2milestone( "Error: /usr/bin/hp-setup not executable or does not exist." ); - Report::Error( hpsetup_not_executable_message ); + Popup::Error( hpsetup_not_executable_message ); return false; } Popup::ShowFeedback( // No title for a simple busy message: @@ -1999,14 +2002,14 @@ // when the user has decided not to initialize/activate/start the PTAL system // because it may be already up and running or the user may want to set it up manually. // Regardless of the state of the PTAL system the backend can be activated in /etc/sane.d/dll.conf - Report::Warning( - // Message of a Report::Warning for scanners which should be set up with the hpoj backend. - // Only a simple message because before there was a Popup::YesNo - // which asked the user whether he wants to let YaST activate the ptal service - // so that this message is shown if the user has explicitely rejected to do it. - // Do not change or translate "ptal", it is a service name. - _("If the ptal service is not running, the scanner cannot work.") - ); + Popup::Warning( + // Message of a Popup::Warning for scanners which should be set up with the hpoj backend. + // Only a simple message because before there was a Popup::YesNo + // which asked the user whether he wants to let YaST activate the ptal service + // so that this message is shown if the user has explicitely rejected to do it. + // Do not change or translate "ptal", it is a service name. + _("If the ptal service is not running, the scanner cannot work.") + ); } else { // The user has decided to initialize/activate/start the PTAL system: @@ -2026,15 +2029,13 @@ // No conflicting print queue was found or // a conflicting print queue was found but the user forced to proceed: if( ! ExecuteBashCommand( setup_ptal_scanner_service_commandline ) ) - { Report::Error( sformat( // Message of a Report::Error where %1 can be replaced by an error message - // if such an error message exists. - // Only a simple message because this error does not happen on a normal system - // (i.e. a system which is not totally broken or totally messed up). - // Do not change or translate "PTAL", it is a subsystem name. - _("Failed to set up the PTAL system.\n%1"), - OnlyMeaningfulErrorMessage( result["stderr"]:"" ) - ) - ); + { Popup::ErrorDetails( // Message of a Popup::ErrorDetails. + // Only a simple message because this error does not happen on a normal system + // (i.e. a system which is not totally broken or totally messed up). + // Do not change or translate "PTAL", it is a subsystem name. + _("Failed to set up the PTAL system."), + result["stderr"]:"" + ); Progress::Title( // Last progress step progress bar title when the Progress was aborted: _("Aborted") ); @@ -2080,14 +2081,12 @@ } else { // Whatever other error: - Report::Warning( sformat( // Message of a Report::Warning when setting scanner access permissions failed - // where %1 can be replaced by an error message if such an error message exists. - // Only a simple message because this error does not happen on a normal system - // (i.e. a system which is not totally broken or totally messed up). - _("Failed to set scanner access permissions.\n%1"), - OnlyMeaningfulErrorMessage( result["stderr"]:"" ) - ) - ); + Popup::WarningDetails( // Message of a Popup::WarningDetails when setting scanner access permissions failed. + // Only a simple message because this error does not happen on a normal system + // (i.e. a system which is not totally broken or totally messed up). + _("Failed to set scanner access permissions.\n%1"), + result["stderr"]:"" + ); } } } @@ -2175,10 +2174,13 @@ } // Deactivate the backend via bash script: if( ! ExecuteBashCommand( deactivate_backend_commandline + " " + backend_name ) ) - { Report::Error( sformat( // Message of a Report::Error where %1 will be replaced by the driver name. - // Only a simple message because this error does not happen on a normal system - // (i.e. a system which is not totally broken or totally messed up). - _("Failed to deactivate %1."), backend_name ) ); + { Popup::ErrorDetails( sformat( // Message of a Popup::ErrorDetails where %1 will be replaced by the driver name. + // Only a simple message because this error does not happen on a normal system + // (i.e. a system which is not totally broken or totally messed up). + _("Failed to deactivate %1."), backend_name + ), + result["stderr"]:"" + ); return false; } // Unset the special requirements for particular backends (e.g. "hpaio", "hpoj") @@ -2213,21 +2215,23 @@ if( ! Service::Stop( "ptal" ) ) { y2milestone( "Service::Stop('ptal') failed." ); if( user_confirmation ) - { Report::Error( // Only a simple message because this error does not happen on a normal system - // (i.e. a system which is not totally broken or totally messed up). - // Do not change or translate "ptal", it is a service name. - _("Failed to stop the ptal service.") - ); + { Popup::ErrorDetails( // Only a simple message because this error does not happen on a normal system + // (i.e. a system which is not totally broken or totally messed up). + // Do not change or translate "ptal", it is a service name. + _("Failed to stop the ptal service."), + Service::Error() + ); } } if( ! Service::Disable( "ptal" ) ) { y2milestone( "Service::Disable('ptal') failed." ); if( user_confirmation ) - { Report::Error( // Only a simple message because this error does not happen on a normal system - // (i.e. a system which is not totally broken or totally messed up). - // Do not change or translate "ptal", it is a service name. - _("Failed to disable the ptal service.") - ); + { Popup::ErrorDetails( // Only a simple message because this error does not happen on a normal system + // (i.e. a system which is not totally broken or totally messed up). + // Do not change or translate "ptal", it is a service name. + _("Failed to disable the ptal service."), + Service::Error() + ); } } } @@ -2315,9 +2319,9 @@ // then show a message but exit successfully because // it is no error when there is no active scanner for the backend: if( size( scanners_to_be_tested ) < 1 ) - { Report::ShowText( sformat( // Header of a Report::ShowText where %1 will be replaced by the driver name: + { Popup::AnyMessage( sformat( // Header of a Popup::AnyMessage where %1 will be replaced by the driver name: _("No Scanner for %1"), backend_name ), - // Body of a Report::ShowText: + // Body of a Popup::AnyMessage: _("It is not possible to test without a matching active scanner.") ); return true; } @@ -2358,16 +2362,16 @@ ); if( ! ExecuteBashCommand( test_backend_commandline + " " + sane_device ) ) { Popup::ClearFeedback(); - Report::Error( sformat( // Message of a Report::Error where - // %1 will be replaced by the SANE device identifier - // %2 will be replaced by the actual test results - // which are usually only available in English. - // Do not change or translate "scanimage -d %1 -v", it is a fixed command. - _("Test with 'scanimage -d %1 -v' failed.\nThe results are:\n\n%2"), - sane_device, - // Fallback message if the real results are missing: - result["stderr"]:_("(no results available)") - ) + Popup::Error( sformat( // Message of a Popup::Error where + // %1 will be replaced by the SANE device identifier + // %2 will be replaced by the actual test results + // which are usually only available in English. + // Do not change or translate "scanimage -d %1 -v", it is a fixed command. + _("Test with 'scanimage -d %1 -v' failed.\nThe results are:\n\n%2"), + sane_device, + // Fallback message if the real results are missing: + result["stderr"]:_("(no results available)") + ) ); // If the test failed, do the whole autodetection anew. // Even if normally nothing should have changed because of a failed test, @@ -2379,20 +2383,20 @@ return false; } Popup::ClearFeedback(); - Report::ShowText( sformat( // Header of a Report::ShowText where %1 will be replaced by the driver name: - _("Successfully Tested %1"), backend_name - ), - sformat( // Body of a Report::ShowText where - // %1 will be replaced by the SANE device identifier - // %2 will be replaced by the actual test results - // which are usually only available in English. - // Do not change or translate "scanimage -d %1 -v", it is a fixed command. - _("Test with 'scanimage -d %1 -v' succeeded.\nThe results are:\n\n%2"), - sane_device, - // Fallback message if the real results are missing: - result["stderr"]:_("(no results available)") - ) - ); + Popup::AnyMessage( sformat( // Header of a Popup::AnyMessage where %1 will be replaced by the driver name: + _("Successfully Tested %1"), backend_name + ), + sformat( // Body of a Popup::AnyMessage where + // %1 will be replaced by the SANE device identifier + // %2 will be replaced by the actual test results + // which are usually only available in English. + // Do not change or translate "scanimage -d %1 -v", it is a fixed command. + _("Test with 'scanimage -d %1 -v' succeeded.\nThe results are:\n\n%2"), + sane_device, + // Fallback message if the real results are missing: + result["stderr"]:_("(no results available)") + ) + ); // Test if HAL knows the particular SANE device. // This writes also /etc/hal/fdi/policy/10osvendor/80-scanner.fdi // if the scanner is not listed in /etc/hal/fdi/policy/10osvendor/70-scanner.fdi @@ -2429,36 +2433,37 @@ */ global boolean DetermineNetworkScanningConfig() { if( ! ExecuteBashCommand( determine_network_scanning_config_commandline ) ) - { Report::Error( // Message of a Report::Error. - // Only a simple message because this error does not happen on a normal system - // (i.e. a system which is not totally broken or totally messed up). - // Do not confuse this error with the case when no scanning via network was configured. - // The latter results no error. - _("Failed to determine the configuration for scanning via network.") - ); + { Popup::ErrorDetails( // Message of a Popup::ErrorDetails. + // Only a simple message because this error does not happen on a normal system + // (i.e. a system which is not totally broken or totally messed up). + // Do not confuse this error with the case when no scanning via network was configured. + // The latter results no error. + _("Failed to determine the configuration for scanning via network."), + result["stderr"]:"" + ); return false; } if( -1 == SCR::Read( .target.size, network_scanning_config_filename ) ) { y2milestone( "Error: %1: file does not exist.", network_scanning_config_filename ); - Report::Error( sformat( // Message of a Report::Error where %1 will be replaced by the file name. - // Only a simple message because this error does not happen on a normal system - // (i.e. a system which is not totally broken or totally messed up). - _("File %1 does not exist."), - network_scanning_config_filename - ) - ); + Popup::Error( sformat( // Message of a Popup::Error where %1 will be replaced by the file name. + // Only a simple message because this error does not happen on a normal system + // (i.e. a system which is not totally broken or totally messed up). + _("File %1 does not exist."), + network_scanning_config_filename + ) + ); return false; } network_scanning_config = (map< string, string >)SCR::Read( .target.ycp, network_scanning_config_filename ); if( nil == network_scanning_config ) { y2milestone( "Error: Failed to read %1", network_scanning_config_filename ); - Report::Error( sformat( // Message of a Report::Error where %1 will be replaced by the file name. - // Only a simple message because this error does not happen on a normal system - // (i.e. a system which is not totally broken or totally messed up). - _("Failed to read %1."), - network_scanning_config_filename - ) - ); + Popup::Error( sformat( // Message of a Popup::Error where %1 will be replaced by the file name. + // Only a simple message because this error does not happen on a normal system + // (i.e. a system which is not totally broken or totally messed up). + _("Failed to read %1."), + network_scanning_config_filename + ) + ); network_scanning_config = $[]; return false; } @@ -2558,13 +2563,14 @@ + network_scanning_config["saned_hosts"]:"" + "'"; if( ! ExecuteBashCommand( commandline ) ) - { Report::Error( // Message of a Report::Error. - // Only a simple message because this error does not happen on a normal system - // (i.e. a system which is not totally broken or totally messed up). - // Do not confuse this error with the case when no scanning via network is to be set up. - // The latter results no error. - _("Failed to set up scanning via network.") - ); + { Popup::ErrorDetails( // Message of a Popup::ErrorDetails. + // Only a simple message because this error does not happen on a normal system + // (i.e. a system which is not totally broken or totally messed up). + // Do not confuse this error with the case when no scanning via network is to be set up. + // The latter results no error. + _("Failed to set up scanning via network."), + result["stderr"]:"" + ); return false; } // If the Suse Firewall is used and @@ -2599,13 +2605,13 @@ || ! SuSEFirewall::RemoveService( "sane-port", "UDP", "EXT" ) ) { y2milestone( "Error: SuSEFirewall::AddService(sane-port,TCP+UDP,EXT) failed." ); - Report::Error( // Message of a Report::Error. - // Only a simple message because this error does not happen on a normal system - // (i.e. a system which is not totally broken or totally messed up). - // Do not confuse this error with the case when no firewall stuff is to be set up. - // The latter results no error. - _("Failed to deny saned access from external zone in firewall.") - ); + Popup::Error( // Message of a Popup::Error. + // Only a simple message because this error does not happen on a normal system + // (i.e. a system which is not totally broken or totally messed up). + // Do not confuse this error with the case when no firewall stuff is to be set up. + // The latter results no error. + _("Failed to deny saned access from external zone in firewall.") + ); return false; } y2milestone( "Success: SuSEFirewall::RemoveService(sane-port,TCP+UDP,EXT)" ); @@ -2616,13 +2622,13 @@ boolean progress_previous_state = Progress::set( false ); if( ! SuSEFirewall::Write() ) { y2milestone( "Error: SuSEFirewall::Write failed to commit firewall settings regarding scanning via network." ); - Report::Error( // Message of a Report::Error. - // Only a simple message because this error does not happen on a normal system - // (i.e. a system which is not totally broken or totally messed up). - // Do not confuse this error with the case when no firewall stuff is to be set up. - // The latter results no error. - _("Failed to write firewall settings regarding scanning via network.") - ); + Popup::Error( // Message of a Popup::Error. + // Only a simple message because this error does not happen on a normal system + // (i.e. a system which is not totally broken or totally messed up). + // Do not confuse this error with the case when no firewall stuff is to be set up. + // The latter results no error. + _("Failed to write firewall settings regarding scanning via network.") + ); // Restore previous Progress state: Progress::set( progress_previous_state ); return false; Modified: trunk/scanner/src/dialogs.ycp URL: http://svn.opensuse.org/viewcvs/yast/trunk/scanner/src/dialogs.ycp?rev=5287… ============================================================================== --- trunk/scanner/src/dialogs.ycp (original) +++ trunk/scanner/src/dialogs.ycp Tue Nov 4 12:42:48 2008 @@ -62,6 +62,14 @@ // Otherwise the user is asked for confirmation whether he want's to continue // despite the fact that the module might not work correctly if( ! Confirm::MustBeRoot() ) return `abort; + // According to http://en.opensuse.org/YaST/Style_Guide#Single_Configuration.2FOverview.2FE… + // the "abort" button in a single configuration dialog must now be named "cancel": + Wizard::SetAbortButton( `abort, Label::CancelButton() ); + // No "back" or "next" button at all makes any sense here + // because there is no dialog where to go "back" + // and the "next" dialog (i.e. the Overview dialog) is launced automatically + Wizard::HideBackButton(); + Wizard::HideNextButton(); Wizard::RestoreHelp( HELPS["read"]:"" ); boolean ret = Scanner::Read(); return ret ? `next : `abort; @@ -72,7 +80,11 @@ * @return `abort if aborted and `next otherwise */ symbol WriteDialog() -{ Wizard::RestoreHelp(HELPS["write"]:""); +{ // No "abort" or "back" or "next" button at all makes any sense here: + Wizard::HideAbortButton(); + Wizard::HideBackButton(); + Wizard::HideNextButton(); + Wizard::RestoreHelp(HELPS["write"]:""); boolean ret = Scanner::Write(); return ret ? `next : `abort; } @@ -87,7 +99,6 @@ { // Caption of the OverviewDialog // (the same as the caption of the matching help text) string caption = _("Scanner Configuration"); - WizardHW::CreateHWDialog( caption, HELPS["overview"]:"", [ // Header for a column of the overview table @@ -120,11 +131,18 @@ ] ] ); - - Wizard::SetNextButton( `next, Label::FinishButton() ); - WizardHW::SetContents( Scanner::OverviewContents() ); - + // In the Overview dialog the "next" button is used to finish the whole module. + // According to http://en.opensuse.org/YaST/Style_Guide#Single_Configuration.2FOverview.2FE… + // the "finish" button in an Overview dialog must now be named "OK": + Wizard::SetNextButton( `next, Label::OKButton() ); + // Do not have a "Back" button in the Overview dialog + // because in the Overview dialog there is nothing where to go back, + // see http://en.opensuse.org/YaST/Style_Guide#Single_Configuration.2FOverview.2FE… + Wizard::HideBackButton(); + // According to http://en.opensuse.org/YaST/Style_Guide#Single_Configuration.2FOverview.2FE… + // the "abort" button in an Overview dialog must now be named "cancel": + Wizard::SetAbortButton( `abort, Label::CancelButton() ); any ret = nil; while(true) { // UI::UserInput returns the label of the button which was cklicked: @@ -512,6 +530,12 @@ continue; } y2milestone( "OverviewDialog returns: %1", ret ); + // Re-set the default ID and label for the button with the "next" functionality for further wizard dialogs: + Wizard::SetNextButton( `next, Label::NextButton() ); + // Restore the above hidden button with "back" functionality for other wizard dialogs: + Wizard::RestoreBackButton(); + // Re-set the default ID and label for the button with the "abort" functionality for further wizard dialogs: + Wizard::SetAbortButton( `abort, Label::AbortButton() ); return ret; } @@ -598,15 +622,19 @@ Label::BackButton(), Label::NextButton() ); + // According to http://en.opensuse.org/YaST/Style_Guide#Configuration_Wizard + // there is no longer a "abort" functionality which exits the whole module. + // Instead this button is now named "Cancel" and its functionality is + // to go back to the Overview dialog (i.e. what the "back" button would do) + // because it reads "Cancel - Closes the window and returns to the overview." + Wizard::SetAbortButton( `back, Label::CancelButton() ); + // According to http://en.opensuse.org/YaST/Style_Guide#Configuration_Wizard + // the button with the "back" functionality must be disabled + // when it is the first dialog of a wizard stlye dialog sequence. + Wizard::DisableBackButton(); any ret = nil; while(true) { ret = UI::UserInput(); - if( ret == `abort - || ret == `cancel - ) - { if( ! ReallyAbort() ) continue; - break; - } if ( ret == `back ) { break; } @@ -734,6 +762,10 @@ y2milestone( "Ignoring unexpected returncode in SelectModelDialog: %1", ret ); continue; } + // Re-set the default ID and label for the button with the "abort" functionality for further wizard dialogs: + Wizard::SetAbortButton( `abort, Label::AbortButton() ); + // Re-enable the above disabled button with the "back" functionality for further wizard dialogs: + Wizard::EnableBackButton(); return ret; } @@ -749,12 +781,29 @@ // The content here is only a dummy. // The real content is what the "Progress:..." shows in ActivateBackend(). term contents = `Label( "" ); + // According to http://en.opensuse.org/YaST/Style_Guide#Configuration_Wizard + // the button with the "back" functionality is unchanged + // when it is not the first dialog of a wizard stlye dialog sequence. + // According to http://en.opensuse.org/YaST/Style_Guide#Configuration_Wizard + // the last "next" button of a wizard-style dialog sequence must be named "finish": Wizard::SetContentsButtons( caption, contents, HELPS["configure_backend"]:"", Label::BackButton(), - Label::NextButton() + Label::FinishButton() ); + // According to http://en.opensuse.org/YaST/Style_Guide#Configuration_Wizard + // there is no longer a "abort" functionality which exits the whole module + // for a wizard stlye dialog sequence. + // Instead within a wizard stlye dialog sequence the button with the + // "abort" functionality is now named "Cancel" and it does not abort the whole module + // but goes back to the Overvied dialog because it reads + // "Cancel - Closes the window and returns to the overview." + // But in this special case it does not make sense to just return to the overview + // because it is not clear if the right now enabled backend should be disabled + // (the same backend could be already used for another scanner) + // so that I do not show any "abort"/"cancel" button here at all: + Wizard::HideAbortButton(); Wizard::DisableBackButton(); Wizard::DisableAbortButton(); Wizard::DisableNextButton(); @@ -770,12 +819,6 @@ any ret = nil; while(true) { ret = UI::UserInput(); - /* abort or cancel */ - if( ret == `abort - || ret == `cancel ) - { if( ! ReallyAbort() ) continue; - break; - } if( ret == `back ) { Wizard::DisableBackButton(); Wizard::DisableAbortButton(); @@ -797,6 +840,8 @@ y2milestone( "Ignoring unexpected returncode in ConfigureBackendDialog: %1", ret ); continue; } + // Restore the above hidden button with "abort" functionality for other wizard dialogs: + Wizard::RestoreAbortButton(); return ret; } @@ -979,21 +1024,25 @@ ), `VStretch() ); + // According to http://en.opensuse.org/YaST/Style_Guide#Single_Configuration.2FOverview.2FE… + // there is no longer a "abort" functionality which exits the whole module. + // Instead this button is now named "Cancel" and its functionality is + // to go back to the Overview dialog (i.e. what the "back" button would do) + // because it reads "Cancel - Closes the window and returns to the overview." + // Therefore the button with the "abort" functionality is not shown at all + // and the button with the "back" functionality is named "Cancel". + // According to http://en.opensuse.org/YaST/Style_Guide#Single_Configuration.2FOverview.2FE… + // the "finish" button in a single (step) configuration dialog must now be named "OK". Wizard::SetContentsButtons( caption, contents, HELPS["configure_network_scanning"]:"", - Label::BackButton(), - Label::NextButton() + Label::CancelButton(), + Label::OKButton() ); + Wizard::HideAbortButton(); any ret = nil; while(true) { ret = UI::UserInput(); - /* abort or cancel */ - if( ret == `abort - || ret == `cancel ) - { if( ! ReallyAbort() ) continue; - break; - } /* local host configuration */ if( ret == `local_host_config ) { UI::ChangeWidget( `id(`saned_hosts_input), @@ -1106,6 +1155,8 @@ y2milestone( "Ignoring unexpected returncode in ConfigureBackendDialog: %1", ret ); continue; } + // Restore the above hidden button with "abort" functionality for other wizard dialogs: + Wizard::RestoreAbortButton(); return ret; } Modified: trunk/scanner/src/scanner.ycp URL: http://svn.opensuse.org/viewcvs/yast/trunk/scanner/src/scanner.ycp?rev=5287… ============================================================================== --- trunk/scanner/src/scanner.ycp (original) +++ trunk/scanner/src/scanner.ycp Tue Nov 4 12:42:48 2008 @@ -21,9 +21,6 @@ y2milestone ("----------------------------------------"); y2milestone ("Scanner module started"); -import "Progress"; -import "Report"; -import "Summary"; import "CommandLine"; import "Scanner"; -- To unsubscribe, e-mail: yast-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: yast-commit+help(a)opensuse.org

1 0

[yast-commit] r52875 - /tags/stable-2_17_20/autoinstallation/
by ug＠svn.opensuse.org 04 Nov '08

04 Nov '08

Author: ug Date: Tue Nov 4 12:26:43 2008 New Revision: 52875 URL: http://svn.opensuse.org/viewcvs/yast?rev=52875&view=rev Log: Created tag stable-2_17_20 for autoinstallation Added: tags/stable-2_17_20/autoinstallation/ - copied from r52874, trunk/autoinstallation/ -- To unsubscribe, e-mail: yast-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: yast-commit+help(a)opensuse.org

1 0

[yast-commit] r52874 - in /trunk/autoinstallation: VERSION package/autoyast2.changes
by ug＠svn.opensuse.org 04 Nov '08

04 Nov '08

Author: ug Date: Tue Nov 4 12:26:38 2008 New Revision: 52874 URL: http://svn.opensuse.org/viewcvs/yast?rev=52874&view=rev Log: 2.17.20 Modified: trunk/autoinstallation/VERSION trunk/autoinstallation/package/autoyast2.changes Modified: trunk/autoinstallation/VERSION URL: http://svn.opensuse.org/viewcvs/yast/trunk/autoinstallation/VERSION?rev=528… ============================================================================== --- trunk/autoinstallation/VERSION (original) +++ trunk/autoinstallation/VERSION Tue Nov 4 12:26:38 2008 @@ -1 +1 @@ -2.17.19 +2.17.20 Modified: trunk/autoinstallation/package/autoyast2.changes URL: http://svn.opensuse.org/viewcvs/yast/trunk/autoinstallation/package/autoyas… ============================================================================== --- trunk/autoinstallation/package/autoyast2.changes (original) +++ trunk/autoinstallation/package/autoyast2.changes Tue Nov 4 12:26:38 2008 @@ -2,6 +2,7 @@ Tue Nov 4 11:34:34 CET 2008 - ug(a)suse.de - LVM cloning fixed (partition_nr) +- 2.17.20 ------------------------------------------------------------------- Fri Oct 31 12:03:58 CET 2008 - ug(a)suse.de -- To unsubscribe, e-mail: yast-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: yast-commit+help(a)opensuse.org

1 0

[yast-commit] r52873 - in /trunk/autoinstallation: package/autoyast2.changes src/modules/AutoinstPartition.ycp
by ug＠svn.opensuse.org 04 Nov '08

04 Nov '08

Author: ug Date: Tue Nov 4 11:34:57 2008 New Revision: 52873 URL: http://svn.opensuse.org/viewcvs/yast?rev=52873&view=rev Log: LVM cloning fixed (partition_nr) Modified: trunk/autoinstallation/package/autoyast2.changes trunk/autoinstallation/src/modules/AutoinstPartition.ycp Modified: trunk/autoinstallation/package/autoyast2.changes URL: http://svn.opensuse.org/viewcvs/yast/trunk/autoinstallation/package/autoyas… ============================================================================== --- trunk/autoinstallation/package/autoyast2.changes (original) +++ trunk/autoinstallation/package/autoyast2.changes Tue Nov 4 11:34:57 2008 @@ -1,4 +1,9 @@ ------------------------------------------------------------------- +Tue Nov 4 11:34:34 CET 2008 - ug(a)suse.de + +- LVM cloning fixed (partition_nr) + +------------------------------------------------------------------- Fri Oct 31 12:03:58 CET 2008 - ug(a)suse.de - reactivated bootloader cloning in the UI Modified: trunk/autoinstallation/src/modules/AutoinstPartition.ycp URL: http://svn.opensuse.org/viewcvs/yast/trunk/autoinstallation/src/modules/Aut… ============================================================================== --- trunk/autoinstallation/src/modules/AutoinstPartition.ycp (original) +++ trunk/autoinstallation/src/modules/AutoinstPartition.ycp Tue Nov 4 11:34:57 2008 @@ -199,7 +199,10 @@ } newPart = set( newPart, "loop_fs", part["loop_fs"]:false ); newPart = set( newPart, "partition_id", part["partition_id"]:131 ); - newPart = set( newPart, "partition_nr", part["partition_nr"]:131 ); + if( haskey( part, "partition_nr" ) ) + newPart = set( newPart, "partition_nr", part["partition_nr"]:0 ); + else + newPart = remove( newPart, "partition_nr" ); newPart = set( newPart, "size", part["size"]:"" ); newPart = set( newPart, "lv_name", part["lv_name"]:"" ); newPart = set( newPart, "lvm_group", part["lvm_group"]:"" ); -- To unsubscribe, e-mail: yast-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: yast-commit+help(a)opensuse.org

1 0

[yast-commit] r52872 - in /trunk/update: VERSION package/yast2-update.changes src/modules/RootPart.ycp
by locilka＠svn.opensuse.org 04 Nov '08

04 Nov '08

Author: locilka Date: Tue Nov 4 11:34:42 2008 New Revision: 52872 URL: http://svn.opensuse.org/viewcvs/yast?rev=52872&view=rev Log: - Making obvious (in log) why a partition is marked 'not-valid' (bnc #441378) - 2.17.10 Modified: trunk/update/VERSION trunk/update/package/yast2-update.changes trunk/update/src/modules/RootPart.ycp Modified: trunk/update/VERSION URL: http://svn.opensuse.org/viewcvs/yast/trunk/update/VERSION?rev=52872&r1=5287… ============================================================================== --- trunk/update/VERSION (original) +++ trunk/update/VERSION Tue Nov 4 11:34:42 2008 @@ -1 +1 @@ -2.17.9 +2.17.10 Modified: trunk/update/package/yast2-update.changes URL: http://svn.opensuse.org/viewcvs/yast/trunk/update/package/yast2-update.chan… ============================================================================== --- trunk/update/package/yast2-update.changes (original) +++ trunk/update/package/yast2-update.changes Tue Nov 4 11:34:42 2008 @@ -1,4 +1,11 @@ ------------------------------------------------------------------- +Tue Nov 4 11:32:57 CET 2008 - locilka(a)suse.cz + +- Making obvious (in log) why a partition is marked 'not-valid' + (bnc #441378) +- 2.17.10 + +------------------------------------------------------------------- Wed Oct 29 14:47:03 CET 2008 - locilka(a)suse.cz - Extended agent reading fstab files (bnc #438129). Modified: trunk/update/src/modules/RootPart.ycp URL: http://svn.opensuse.org/viewcvs/yast/trunk/update/src/modules/RootPart.ycp?… ============================================================================== --- trunk/update/src/modules/RootPart.ycp (original) +++ trunk/update/src/modules/RootPart.ycp Tue Nov 4 11:34:42 2008 @@ -1430,7 +1430,7 @@ y2warning ("Cannot find / entry in fstab %1", fstab); } - boolean ok = size(fstab[0,"spec"]:"")>0 && + freshman[`valid] = size(fstab[0,"spec"]:"")>0 && Storage::DeviceMatchFstab( p_dev, // bugzilla #304269 // DeviceMatchFstab expects _old_ not _translated_ device @@ -1439,12 +1439,10 @@ // Why this doesn't match? // Possible reasons: // - /var not mounted so hwinfo cannot translate device names - if (ok != true) { + if (freshman[`valid]:false != true) { y2warning ("Device does not match fstab: '%1' vs. '%2'", p_dev, fstab[0,"spec"]:""); } - freshman[`valid] = ok; - // Get installed release name string release = SuSERelease::ReleaseInformation (Installation::destdir); @@ -1462,7 +1460,9 @@ // `arch_valid, see bugzilla #288201 // installed /bin/bash and the one from inst-sys are matching if (freshman[`arch]:"unknown" == instsys_arch) { - freshman[`arch_valid] = ok; + y2milestone ("Arcitecture (%1) is valid", instsys_arch); + freshman[`arch_valid] = true; + // both are PPC, bugzilla #249791 } else if ( contains(["ppc", "ppc64"], freshman[`arch]:"unknown") @@ -1471,11 +1471,19 @@ ) { y2milestone ("Architecture for partition %1 is %2, upgrading %3", p_dev, freshman[`arch]:"unknown", instsys_arch); freshman[`arch_valid] = true; + + // Architecture is not matching } else { y2milestone ("Architecture for partition %1 is %2, upgrading %3", p_dev, freshman[`arch]:"unknown", instsys_arch); freshman[`arch_valid] = false; } + // If architecture is not matching, the whole partition is considered to be wrong + if (freshman[`arch_valid]:false != true) { + y2milestone ("Architecture is not valid -> the whole partition is not valid"); + freshman[`valid] = false; + } + y2milestone ("Partition is valid: %1, arch is valid: %2", freshman[`valid]:false, freshman[`arch_valid]:false); } -- To unsubscribe, e-mail: yast-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: yast-commit+help(a)opensuse.org

1 0

[yast-commit] r52871 - /tags/stable-2_17_8/theme/
by jsrain＠svn.opensuse.org 04 Nov '08

04 Nov '08

Author: jsrain Date: Tue Nov 4 11:25:00 2008 New Revision: 52871 URL: http://svn.opensuse.org/viewcvs/yast?rev=52871&view=rev Log: Created tag stable-2_17_8 for theme Added: tags/stable-2_17_8/theme/ - copied from r52870, trunk/theme/ -- To unsubscribe, e-mail: yast-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: yast-commit+help(a)opensuse.org

1 0

[yast-commit] r52870 - in /trunk/theme: VERSION package/yast2-theme.changes yast2-theme.spec.in
by jsrain＠svn.opensuse.org 04 Nov '08

04 Nov '08

Author: jsrain Date: Tue Nov 4 11:24:11 2008 New Revision: 52870 URL: http://svn.opensuse.org/viewcvs/yast?rev=52870&view=rev Log: fixed dependencies Modified: trunk/theme/VERSION trunk/theme/package/yast2-theme.changes trunk/theme/yast2-theme.spec.in Modified: trunk/theme/VERSION URL: http://svn.opensuse.org/viewcvs/yast/trunk/theme/VERSION?rev=52870&r1=52869… ============================================================================== --- trunk/theme/VERSION (original) +++ trunk/theme/VERSION Tue Nov 4 11:24:11 2008 @@ -1 +1 @@ -2.17.7 +2.17.8 Modified: trunk/theme/package/yast2-theme.changes URL: http://svn.opensuse.org/viewcvs/yast/trunk/theme/package/yast2-theme.change… ============================================================================== --- trunk/theme/package/yast2-theme.changes (original) +++ trunk/theme/package/yast2-theme.changes Tue Nov 4 11:24:11 2008 @@ -1,4 +1,10 @@ ------------------------------------------------------------------- +Tue Nov 4 12:18:17 CET 2008 - jsrain(a)suse.cz + +- fixed dependencies +- 2.17.8 + +------------------------------------------------------------------- Tue Nov 4 08:45:52 CET 2008 - jsrain(a)suse.cz - merged yast2-theme-SLE into one source package Modified: trunk/theme/yast2-theme.spec.in URL: http://svn.opensuse.org/viewcvs/yast/trunk/theme/yast2-theme.spec.in?rev=52… ============================================================================== --- trunk/theme/yast2-theme.spec.in (original) +++ trunk/theme/yast2-theme.spec.in Tue Nov 4 11:24:11 2008 @@ -43,6 +43,8 @@ Version: @VERSION@ Group: System/YaST Provides: yast2_theme = %{version} +Provides: yast2-theme-NLD = 0.4.5 +Obsoletes: yast2-theme-NLD <= 0.4.5 PreReq: /bin/ln %description openSUSE -- To unsubscribe, e-mail: yast-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: yast-commit+help(a)opensuse.org

1 0

[yast-commit] r52869 - /tags/stable-2_17_1/live-installer/
by jsrain＠svn.opensuse.org 04 Nov '08

04 Nov '08

Author: jsrain Date: Tue Nov 4 11:06:46 2008 New Revision: 52869 URL: http://svn.opensuse.org/viewcvs/yast?rev=52869&view=rev Log: Created tag stable-2_17_1 for live-installer Added: tags/stable-2_17_1/live-installer/ - copied from r52868, trunk/live-installer/ -- To unsubscribe, e-mail: yast-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: yast-commit+help(a)opensuse.org

1 0

[yast-commit] r52868 - in /trunk/live-installer: VERSION package/yast2-live-installer.changes src/live-installer.ycp
by jsrain＠svn.opensuse.org 04 Nov '08

04 Nov '08

Author: jsrain Date: Tue Nov 4 11:06:41 2008 New Revision: 52868 URL: http://svn.opensuse.org/viewcvs/yast?rev=52868&view=rev Log: display a warning if low amount of memory is detected (bnc #434561) Modified: trunk/live-installer/VERSION trunk/live-installer/package/yast2-live-installer.changes trunk/live-installer/src/live-installer.ycp Modified: trunk/live-installer/VERSION URL: http://svn.opensuse.org/viewcvs/yast/trunk/live-installer/VERSION?rev=52868… ============================================================================== --- trunk/live-installer/VERSION (original) +++ trunk/live-installer/VERSION Tue Nov 4 11:06:41 2008 @@ -1 +1 @@ -2.17.0 +2.17.1 Modified: trunk/live-installer/package/yast2-live-installer.changes URL: http://svn.opensuse.org/viewcvs/yast/trunk/live-installer/package/yast2-liv… ============================================================================== --- trunk/live-installer/package/yast2-live-installer.changes (original) +++ trunk/live-installer/package/yast2-live-installer.changes Tue Nov 4 11:06:41 2008 @@ -1,4 +1,11 @@ ------------------------------------------------------------------- +Tue Nov 4 11:59:02 CET 2008 - jsrain(a)suse.cz + +- display a warning if low amount of memory is detected + (bnc #434561) +- 2.17.1 + +------------------------------------------------------------------- Thu Sep 11 07:53:33 CEST 2008 - jsrain(a)suse.cz - merged texts from proofread Modified: trunk/live-installer/src/live-installer.ycp URL: http://svn.opensuse.org/viewcvs/yast/trunk/live-installer/src/live-installe… ============================================================================== --- trunk/live-installer/src/live-installer.ycp (original) +++ trunk/live-installer/src/live-installer.ycp Tue Nov 4 11:06:41 2008 @@ -29,6 +29,24 @@ } Wizard::OpenNextBackStepsDialog(); + + // check available memory + list memories = (list) SCR::Read(.probe.memory); + integer memsize = memories[0,"resource","phys_mem",0,"range"]:0; + integer oneGB = 1073741824; + y2milestone ("Physical memory %1", memsize); + if (memsize < oneGB) { + // pop-up, %1 is memory size, currently hardcoded "1 GB" + if (! Popup::ContinueCancel (sformat (_("Your computer has less than %1 of memory. This may not be +sufficient for the live installation, especially when installing +while running other applications. +Before continuing, finish all running applications."), "1 GB"))) + { + UI::CloseDialog(); + return nil; + } + } + Installation::destdir = "/mnt"; Installation::scr_destdir = "/mnt"; import "Storage"; -- To unsubscribe, e-mail: yast-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: yast-commit+help(a)opensuse.org

1 0

[yast-commit] r52867 - /tags/stable-2_17_7/theme/
by jsrain＠svn.opensuse.org 04 Nov '08

04 Nov '08

Author: jsrain Date: Tue Nov 4 10:08:25 2008 New Revision: 52867 URL: http://svn.opensuse.org/viewcvs/yast?rev=52867&view=rev Log: Created tag stable-2_17_7 for theme Added: tags/stable-2_17_7/theme/ - copied from r52866, trunk/theme/ -- To unsubscribe, e-mail: yast-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: yast-commit+help(a)opensuse.org

1 0