November 2011 - Radeon HD - openSUSE Mailing Lists

[Bug 21388] New: Dual monitor setup results in blank screen on CRTC1
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=21388 Summary: Dual monitor setup results in blank screen on CRTC1 Product: xorg Version: unspecified Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: major Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: pht(a)spatium.org QAContact: xorg-team(a)lists.x.org Created an attachment (id=25111) --> (http://bugs.freedesktop.org/attachment.cgi?id=25111) xorg config I have a dual monitor setup (see attached files); the problem is that the secondary monitor (connected to dvi2) stays black. Note that these are CRT monitors. It switches to correct mode, thus is not out of range, I can verify that via the OSD menu. I can even switch it to different modes using xrandr, but it stays black. It is not a hardware issue, dual monitors work okay in the other operating system. The theory is that CRTC1 is not properly initialized or operated. This is backed up by the fact that when the first (ie. working) monitor is plugged out before starting X, the other monitor (ie. blank) is working, and when the former first monitor is plugged back and activated via xrandr, it stays black. I experienced a brief moment a working setup, which went as follows: the X server was first configured to run with the radeon driver, then it was shut down, then the radeonhd driver was configured. This setup resulted in both monitors working. After shutting down X again, all was back to previous state, as described above. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 7

[Bug 21383] New: X1200 screen flicker problem
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=21383 Summary: X1200 screen flicker problem Product: xorg Version: unspecified Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: critical Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: priikone(a)silcnet.org QAContact: xorg-team(a)lists.x.org Since fglrx that supports ubuntu 9.04 doesn't anymore support X1200 I had to start using radeonhd but it has some serious flickering problems. Whenever there is enough movement in the screen the screen flickers, white lines, random garbage, and various displacements going on quite often. Best example is a website which triggers the most sever problems with flash animations: http://www.foreca.fi/Suomi/tasmasaa/Helsinki Depending on what flash animations is running there the screen is either flickering a little bit a quite a lot. This site reproduces the problem every time. (The site shows local weather in Helsinki area) It can also be reproduced by for example giving dmesg;dmesg in gnome-terminal and then constantly doing Page Up and Page Down (with xset r rate 200 to get away the keyboard delay) and the screen will flicker. With this I can also reproduce the problem every time. Attached xorg.conf and X logs. Whatever else data you need to get let me know. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 12

[Bug 21698] New: DRM does not recognize Radeon HD 4890, /dev/dri/ empty
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=21698 Summary: DRM does not recognize Radeon HD 4890, /dev/dri/ empty Product: xorg Version: unspecified Platform: Other OS/Version: All Status: NEW Severity: normal Priority: low Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: xamaniqinqu(a)gmail.com QAContact: xorg-team(a)lists.x.org Created an attachment (id=25790) --> (http://bugs.freedesktop.org/attachment.cgi?id=25790) X server error log DESCRIPTION: The Direct Rendering Manager does not recognize the Radeon HD 4890 video card. There are no device nodes in /dev/dri/. Operating system: Gentoo Linux/amd64, ~amd64 branch X server version: 1.5.3.6 Mesa version: git DRM version: git Radeonhd version: git REPRODUCTION: (1) install the ATI Radeon HD 4890 video card. (2) install Mesa, DRM and radeonhd from git. (3) start the X server. (!) A peculiarity: glxinfo does report "Direct Rendering: Yes". Glxgears also uses direct rendering (~400 FPS). No other program is able to use DRI. I added "Group 0666" to my DRI section in xorg.conf. ERROR LOG: Attached. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 11

[Bug 24529] New: Drawing errors with radeon or radeonhd drivers with EXA or XAA
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=24529 Summary: Drawing errors with radeon or radeonhd drivers with EXA or XAA Product: xorg Version: 7.4 Platform: x86-64 (AMD64) URL: http://forums.gentoo.org/viewtopic-t-796671.html OS/Version: Linux (All) Status: NEW Severity: major Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: guido-xorgbugs(a)unknownsite.de QAContact: xorg-team(a)lists.x.org On my Ati Radeon X1800, when using the radeonhd driver with AccelMethod XAA or EXA and/or with the kernel drm module loaded, the screen shows drawing errors that make the X session partially and in some cases completely unusable. When using XAA and the kernel DRM module is not loaded, most non-Qt4 apps show drawing errors that make them unusable. Examples: xterm and Firefox cannot scroll properly, OpenOffice.org and many Qt3 apps don't draw most of their controls, only the text labels and graphic icons on them, while the background stays what happened to be in that part of the screen before that window appeared. Most Qt 4 apps display fine, with only minor problems. When using EXA and the kernel DRM module is not loaded, all windows stay solid black. When the kernel DRM module is loaded, the entire screen will become unusable, either solid black or sometimes solid white, either directly after starting the X server or after starting some program that actually uses OpenGL (I used glxgears). With AccelMethod set to ShadowFB, no drawing errors are visible, but the desktop is rather slow, and both XV and hardware accelerated 3D rendering don't work. I have already described the problem a bit more in depth, including configuration files and server logs, over at the Gentoo forums here: http://forums.gentoo.org/viewtopic-t-796671.html In the above thread, it says I am using driver version 2.5.0, but I have since then upgraded to the newest git version (following the advice on http://wiki.x.org/wiki/radeonhd#head-f79351b4e2b19fad40529ce297ac2d2a1e9035…), and the problem is still there. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 3

[Bug 22656] New: Monitor off after suspend to ram
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=22656 Summary: Monitor off after suspend to ram Product: xorg Version: 7.4 Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: kamil.stachowski(a)gmail.com QAContact: xorg-team(a)lists.x.org Created an attachment (id=27451) --> (http://bugs.freedesktop.org/attachment.cgi?id=27451) Xorg log ## Happens on: Dell Studio 1737, Radeon HD 3650 Arch Linux, kernel 2.6.30-5, xorg-server 1.6.1.901-3, xf86-video-radeonhd 1.2.5-1, pm-utils 1.2.5.1 Also tried–though much less extensively–on Debian Sid, with the same results. ## Problem: Monitor is off after suspend to ram. The computer wakes up ok but the monitor remains off. Issuing "vbetool dpms on" and "vbetool post" doesn't seem to change anything. ## I have tried: – pm-utils with all options and various (though not all possible) combinations; – s2ram with all suggested options; – hibernate-script with both pm-utils and uswsusp; – machdep.acpi_vbios_reset=0, acpi.vbios_reset=0 combined with vbepost, hpet=disable. Results vary from complete freeze to everything's-fine-except-for-the-screen-is-black. This is reflected in the pm-suspend log, varying from empty through almost-great-but-the-resume-part-is-missing, through crash-on-resuming-99video to absolutely perfect. I've also tried the radeon driver (6.12.2-2; doesn't really work too well with my card), I got it to successfully resume, except for that it froze when I tried to shut it down later on; -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team N��r��y隊Z�u�'�߮�˛��m�)z{.��+�Z+i�b�*'jW(�f�vǦj)kiר�~��i��

1 5

[Bug 23912] New: No HDMI audio with RV730 GPU on radeonhd
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=23912 Summary: No HDMI audio with RV730 GPU on radeonhd Product: xorg Version: unspecified Platform: x86-64 (AMD64) URL: http://phoronix.com/forums/showthread.php?p=91863#post91 863 OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: andrew(a)wasielewski.co.uk QAContact: xorg-team(a)lists.x.org Created an attachment (id=29492) --> (http://bugs.freedesktop.org/attachment.cgi?id=29492) Latest Xorg.0.log file I can't get HDMI audio from RV730 GPU (Asus Radeon HD 4670 PCI-e card) on radeonhd. O/S: Fedora 11 (2.6.30.5-43.fc11.x86_64) radeonhd package: 1.2.5 (xorg-x11-drv-radeonhd.x86_64 1.2.5-2.10.20090714git.fc11) Desktop: KDE 4.3 Motherboard: Gigabyte GA-MA78G-DS3H HDMI audio works on same hardware config in MS Windows and with ATI fglrx driver. Also Gigabyte GA-MA78G-DS3H motherboard has HD 3200 GPU integrated with the 780G chipset, though this is normally disabled in BIOS in favour of the HD 4670 PCI-e card. If I re-enable integrated graphics and connect to this HDMI port, I get sound when I play "Test" in the Multimedia - System Settings screen. I know radeonhd supports RV730 but can't find any definitive statement one way or other re: HDMI audio. Can only attach one file so have attached Xorg.0.log. xorg.conf is in Phoronix forum post in URI above. Regards, Andrew Wasielewski -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 3

[Bug 21637] New: Fall back to shadowfb for second X session
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=21637 Summary: Fall back to shadowfb for second X session Product: xorg Version: unspecified Platform: All OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: federicotg(a)gmail.com QAContact: xorg-team(a)lists.x.org Currently DRM only works for the first X session. When the user switches to another session by fast user switching or any other means, DRM and EXA are not available so rendering is unnacelerated and very slow. Using shadowfb as a fallback in that case would provide much better performance. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 4

[Bug 24466] New: rhd_dump doesn't work with RV730
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=24466 Summary: rhd_dump doesn't work with RV730 Product: xorg Version: unspecified Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: andrew(a)wasielewski.co.uk QAContact: xorg-team(a)lists.x.org When I try to run rhd_dump with my RV730 GPU I get the following error: [root@localhost conntest]# ./rhd_dump 01:00.0 rhd_dump: v1.3.0, git branch master, commit 42a81085 Unknown device: 0x1002:0x9490 (01:00.00). The same thing happens with locally-compiled radeonhd 1.3.0. and with latest radeonhd 1.2.5 Fedora package. With the on-board HD 3200 active instead I get normal output (on radeonhd 1.3.0). I get an entry in Xorg.0.log about "unidentified card" but I get the same about RS780 with the HD 3200 active. (II) RADEONHD(0): Card not in database: 0x9490:0x1043:0x0268; using generic modesetting. If - and only if - your card does not work or does not work optimally please contact radeonhd(a)opensuse.org to help rectify this. Use the subject: 0x9490:0x1043:0x0268: <name of board> and *please* describe the problems you are seeing in your message. (--) RADEONHD(0): Detected an RV730 on an unidentified card I have seen some postings about this error before, but no indication how to fix it e.g. http://lists.opensuse.org/radeonhd/2008-08/msg00287.html. O/S: Fedora 11 (kernel 2.6.30.8) M/B: Gigabyte GA-MA78G-DS3H The aim is to compare register values under radeonhd and fglrx to try and find out why HDMI audio doesn't work. Thanks, Andrew -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 5

[Bug 23759] New: can't switch to VT
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=23759 Summary: can't switch to VT Product: xorg Version: git Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: minor Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: hdh(a)lazny.tang.la QAContact: xorg-team(a)lists.x.org On an HP dv6-1280us laptop with Radeon HD 4650, radeonhd git from 20090905 When switching to VT: * With radeon driver, the screen turn off then on as VT * With radeonhd driver, the screen doesn't turn off, it stay lit but black Pressing Alt-F7 brings X back to the front I will attach Xorg.0.log with logverbose 7 later. Here is my xorg.conf Section "Device" Identifier "M96" Driver "radeonhd" Option "AccelMethod" "exa" Option "DRI" "on" EndSection I have tried removing Option "AccelMethod" "exa" but the issue persist. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 4

[Bug 19802] [4850HD] Output DVI-I_2/analog enabled but has no modes
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

https://bugs.freedesktop.org/show_bug.cgi?id=19802 Jeremy Huddleston <jeremyhu(a)freedesktop.org> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|REOPENED |RESOLVED Resolution| |WONTFIX --- Comment #7 from Jeremy Huddleston <jeremyhu(a)freedesktop.org> 2011-11-07 15:26:16 PST --- Closing due to lack of response. Please reopen and move to the Driver/Radeon component if this issue persists with xf86-video-ati -- Configure bugmail: https://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA Contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org To contact the owner, e-mail: radeonhd+owner(a)opensuse.org

1 0