March 2010 - Radeon HD - openSUSE Mailing Lists

0x954F:0x174B:0xE990: ATI Technologies Inc RV710 [Radeon HD 4350]
by Michał Nazarewicz 11 Mar '10

11 Mar '10

Hello, I'm writing this mail as I'm experiencing some issues with my ATI video card when running under Debian GNU/Linux. Problem I'm experiencing is lack of rotation, that is xrandr returns: #v+ $ xrandr --version xrandr program version 1.3.2 Server reports RandR version 1.3 $ xrandr -o right X Error of failed request: BadMatch (invalid parameter attributes) Major opcode of failed request: 148 (RANDR) Minor opcode of failed request: 2 (RRSetScreenConfig) Serial number of failed request: 14 Current serial number in output stream: 14 $ xrandr -o left X Error of failed request: BadMatch (invalid parameter attributes) Major opcode of failed request: 148 (RANDR) Minor opcode of failed request: 2 (RRSetScreenConfig) Serial number of failed request: 14 Current serial number in output stream: 14 #v- "-o normal" works but disables my second monitor. The following are my installed xorg packages: #v+ xserver-xorg 1:7.5+3 the X.Org X server xserver-xorg-core 2:1.7.5-1 Xorg X server - core server xserver-xorg-dev 2:1.7.5-1 Xorg X server - development files xserver-xorg-input-evdev 1:2.3.2-3 X.Org X server -- evdev input driver xserver-xorg-video-fbdev 1:0.4.1-1 X.Org X server -- fbdev display driver xserver-xorg-video-r128 6.8.1-2 X.Org X server -- ATI r128 display driver xserver-xorg-video-radeon 1:6.12.4-2 X.Org X server -- ATI Radeon display driver xserver-xorg-video-radeonhd 1.3.0-2 X.Org X server -- AMD/ATI r5xx, r6xx display xserver-xorg-video-v4l 1:0.2.0-4 X.Org X server -- Video 4 Linux display driver xserver-xorg-video-vesa 1:2.3.0-1 X.Org X server -- VESA display driver #v- It seems that the packages should be recent enough. Attached is output of lspci -vvv as well as Xorg.0.og and xorg.conf. The Xorg log says that "Card not in database: 0x954F:0x174B:0xE990" so I'm contacting you as advised by the message. -- Best regards, _ _ .o. | Liege of Serenely Enlightened Majesty of o' \,=./ `o ..o | Computer Science, Michał "mina86" Nazarewicz (o o) ooo +---[mina86@mina86.com]---[mina86@jabber.org]---ooO--(_)--Ooo--

1 0

Problems with Mobility Radeon X1300
by Josh Lawrence 11 Mar '10

11 Mar '10

Hello everyone, I was advised last night on irc to contact this list about my problem. I just acquired a Lenovo Thinkpad T60 that has a Mobility Radeon X1300 for the graphics chip. Using the radeonhd driver, I can get better than 1024x768 resolution, but the text and graphics on the screen are extremely poor and cannot be read. The only resolution that is readable is 1024x768. I'm wondering if anything can be done to improve the quality of the graphics output so I can have more screen real estate. I've tried to include some useful information such as lspci, rhd_conntest -s and my xorg.conf here: http://www.hardbop200.com/docs/info.txt I have also set -logverbose 7 and put my Xorg.0.log here: http://www.hardbop200.com/docs/Xorg.0.log I'm not sure if you all prefer to have the log in the actual email or if a link is better, so I'm including links but will be happy to resubmit with everything in the email if you prefer. I should mention here that I'm not using any external monitors, just the LCD panel. Also, I'm only interested in good, clean, readable text and graphics, no whiz-bang 5D stuff. :) Thanks! -- Josh Lawrence http://www.hardbop200.com -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

2 2

Card not in database: 0x95C5:0x1028:0x0342, RV620 Segmentation fault
by WCM 06 Mar '10

06 Mar '10

Hardware: Dell Optiplex 380 with AMD HD 3450 (RV620)

1 0

0x95C5:0x1787:0x2000: HD 3450 HISdigital 3D graphics card
by Dan Newman 06 Mar '10

06 Mar '10

This board is driving an ASUS MK241H monitor. The board has a DVI connector on its backplate, and a VGA connector on a flying lead. It has a DVI to HDMI adapter which provides HDMI output. The HDMI output previously worked successfully using the closed-source fglrx driver under Ubuntu Karmic. With a recent upgrade to Lucid, I switched to the radeonhd driver, and have been unable to get the HDMI output working. I installed the radeonhd driver in accordance with instructions at: https://help.ubuntu.com/community/RadeonHD Using the radeonhd driver and with the VGA connector in use, randr reports the following: xrandr -q Screen 0: minimum 320 x 200, current 3840 x 1200, maximum 3840 x 1920 TV_7PIN_DIN disconnected VGA_1 connected 1920x1200+0+0 518mm x 324mm 1920x1200 59.9*+ 59.9 1600x1200 60.0 59.9 1680x1050 69.9 59.9 60.0 1400x1050 70.0 60.0 1280x1024 75.0 59.9 60.0 1440x900 60.0 59.9 1280x960 60.0 59.9 1360x768 59.8 1360x765 59.8 1152x864 75.0 75.0 74.9 70.0 60.0 1024x768 75.1 75.0 70.1 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 640x480 75.0 72.8 72.8 75.0 60.0 59.9 720x400 70.1 DVI-I_1/digital disconnected DVI-I_1/analog disconnected 1920x1200 (0x143) 154.0MHz h: width 1920 start 1968 end 2000 total 2080 skew 0 clock 74.0KHz v: height 1200 start 1203 end 1209 total 1235 clock 60.0Hz With the VGA connector in use, X starts as shown in the attached Xorg.0.log, and appears to function normally. With the HDMI connector in use, X starts as shown in the attached Xorg.0.log.old, but the monitor goes blank and then reports "no HDMI signal" Any suggestions on how to get the HDMI output working using the radeonhd driver? Thanks, Dan

1 0

0x9710:0x1462:0x7596
by Omer Uner GUCLU 05 Mar '10

05 Mar '10

Hello all, My Xorg.log contains : (II) RADEONHD: version 1.3.0, built from dist of git branch master, commit 79a0ab2f (II) Primary Device is: PCI 01@00:05:0 (EE) KMS is disabled. This is good for us, because RADEONHD conflicts with KMS. (**) RADEONHD(0): Depth 24, (--) framebuffer bpp 32 (**) RADEONHD(0): Option "DRI" "on" (**) RADEONHD(0): Selected EXA 2D acceleration. (II) RADEONHD(0): Card not in database: 0x9710:0x1462:0x7596; using generic modesetting. If - and only if - your card does not work or does not work optimally please contact radeonhd(a)opensuse.org to help rectify this. Use the subject: 0x9710:0x1462:0x7596: <name of board> and *please* describe the problems you are seeing in your message. (--) RADEONHD(0): Detected an RS880 on an unidentified card (II) RADEONHD(0): Mapped IO @ 0xfeaf0000 to 0x7fce221ea000 (size 0x00010000) (II) RADEONHD(0): Getting BIOS copy from legacy VBIOS location (II) RADEONHD(0): ATOM BIOS Rom: SubsystemVendorID: 0x1002 SubsystemID: 0x1002 IOBaseAddress: 0xd000 Filename: 13B43106.004 BIOS Bootup Message: 113-B43106-004 RS880 DDR2 200e/500m Would you give me any advice ? -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

4 3

[Bug 22213] New: [EXA] Blur on y-axis also when only x-axis is scaled billiear
by bugzilla-daemon＠freedesktop.org 03 Mar '10

03 Mar '10

http://bugs.freedesktop.org/show_bug.cgi?id=22213 Summary: [EXA] Blur on y-axis also when only x-axis is scaled billiear Product: xorg Version: unspecified Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: linuxhippy(a)gmail.com QAContact: xorg-team(a)lists.x.org Created an attachment (id=26644) --> (http://bugs.freedesktop.org/attachment.cgi?id=26644) screenshot illustrating the problem When scaling a picture in x-axis and billinear filtering is requested, the y-axis is blurred too. Seems to me like an off-one-half bug. The attached screenshot illustrates the problem. The first (top) line was rendered with pixman (NoAccel), the second line with exa on my HD3850 / Ubuntu 9.04 live cd. This causes problems with themes that cache pre-rendered elements in pixmaps and use them scaled later on. (E.g. button outline is blurred instead of sharp 1px line). -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 2

0x9598:0x3992:0x1545: radeon hd 2600
by John DeStefano 03 Mar '10

03 Mar '10

Hi, A few problems I'm experiencing: - Xorg is reporting my card as a Raden HD 3600/3650 instead of the HD 2600 the card packaging purports it to be - My Fedora 12 64-bit installation appears to hang on boot (after "starting atd: [ok]") when using the latest available xorg-x11-drv-radeonhd.x86_64 driver (1.3.0-4.2.20091204git.fc12), though it remains responsive and I can log in via another console session. - Starting X with this driver results in a black screen, with no errors or artifacts (see attached log). More info: http://www.linuxquestions.org/questions/fedora-35/ati-card-and-compositing-… Thanks, ~John

1 0

0x9581:0x1043:0x1562: Radeon Mobility 2600HD
by Marc Huntley 02 Mar '10

02 Mar '10

Greetings, Per the log snippet: =====BEGIN LOG SNIPPET===== (**) RADEONHD(0): Depth 24, (--) framebuffer bpp 32 (**) RADEONHD(0): Option "AccelMethod" "EXA" (**) RADEONHD(0): Option "DRI" "on" (**) RADEONHD(0): Selected EXA 2D acceleration. (II) RADEONHD(0): Card not in database: 0x9581:0x1043:0x1562; using generic modesetting. If - and only if - your card does not work or does not work optimally please contact radeonhd(a)opensuse.org to help rectify this. Use the subject: 0x9581:0x1043:0x1562: <name of board> and *please* describe the problems you are seeing in your message. (--) RADEONHD(0): Detected an M76 on an unidentified card (II) RADEONHD(0): Mapped IO @ 0xfdff0000 to 0xb73fb000 (size 0x00010000) (II) RADEONHD(0): PCIE Card Detected (II) RADEONHD(0): Getting BIOS copy from legacy VBIOS location (II) RADEONHD(0): ATOM BIOS Rom: SubsystemVendorID: 0x1043 SubsystemID: 0x1562 IOBaseAddress: 0xc000 Filename: f3ka0821.m76 BIOS Bootup Message: F3Ka M76M GDDR2 512M 500e/400m ASID:A15327.018$ =====END LOG SNIPPET===== There is a definitive slowness in the 2D performance, and looks the same as if it was running with the standard VESA driver. The screen draws in chunks instead of the smoothness before upgrading to 2.6.33 and the card drivers from https://launchpad.net/~xorg-edgers/+archive/drivers-only. I seem to get the same results when using XAA or even ShadowFB. I am following the instructions from https://help.ubuntu.com/community/RadeonHD to get desirable 3D performance, and my 2D seems to have taken a hit. Please let me know what would be the best steps to take. Thank you in advance! -Marc -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 0