September 2009 - Radeon HD - openSUSE Mailing Lists

[Bug 19861] New: second screen in multi seat config zig-zag problems
by bugzilla-daemon＠freedesktop.org 24 Oct '11

24 Oct '11

http://bugs.freedesktop.org/show_bug.cgi?id=19861 Summary: second screen in multi seat config zig-zag problems Product: xorg Version: 7.2 Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: freedesktop(a)veninga.familiemail.nl QAContact: xorg-team(a)lists.x.org Created an attachment (id=22421) --> (http://bugs.freedesktop.org/attachment.cgi?id=22421) xorg log of first screen I have two radeon 4650 card in a multi seat configuration. My first problem was getting the second card to work. I did the following: # turn on second card if [ -e /sys/bus/pci/devices/0000\:02\:00.0/enable ] then if [ `cat /sys/bus/pci/devices/0000\:02\:00.0/enable` == '0' ] then echo 1 > /sys/bus/pci/devices/0000\:02\:00.0/enable echo 1 > /sys/bus/pci/devices/0000\:02\:00.0/rom fi fi The second card now sort of works. The screen will start, but the picture is not correct. For instance a diagonal line gets a large zig-zag. See these pictures: correct gdm screen on first monitor: http://jvfoto.mine.nu/half_p2011045.jpg wrong gdm screen on second monitor: http://jvfoto.mine.nu/half_p2011046.jpg note the zig-zag arc, the flower being positioned of screen and strange printing of the words "Welcome" and "Username". If I use the fglrx driver on the second screen everything looks allright, but I have other problems with that setup, for instance not being able to restart the X-server. I first tried the release version 1.2.4. Now I have tested the current git version (2009-01-31) with the same results. I have attached a tar file with: Xorg.0.log for the first screen Xorg.1.log for the second screen (wrong) xorg.conf with the used configuration and the two screenshots -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 4

[Bug 20470] New: UploadToScreen causes corruption
by bugzilla-daemon＠freedesktop.org 22 Oct '11

22 Oct '11

http://bugs.freedesktop.org/show_bug.cgi?id=20470 Summary: UploadToScreen causes corruption Product: xorg Version: unspecified Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: thoemy(a)gmail.com QAContact: xorg-team(a)lists.x.org Created an attachment (id=23533) --> (http://bugs.freedesktop.org/attachment.cgi?id=23533) Some pictures of mouse cursors Hi, after the DFS and UTS hooks were enabled I experienced corruption. The corruption affects the mouse cursor, sometimes window decorations, nearly always the buttons in firefox, sometimes the desktop background, sometimes launchers in the gnome-panel and other things. Attached are screenshots that demonstrate how the corruption looks. The corruption of the mouse cursor is not visible on screenshots so I took them with a digital camera. The stripes appear only on the right of the cursor and it changes if I move the cursor into another text input box. The corruptions are not very serious. I didn't complained until yet because I was busy and I hoped that the problem gets fixed. Disabling the UTS hook fixes the corruptions. Unfortunately the whole desktop is then very unresponsive. The first bad commit was f1b9c19683090272a29a3e4c9e2c054b4a32b47c (R6xx/R7xx EXA: add accelerated UTS/DFS hooks) Some information about my system: X.Org X Server 1.5.99.902 (1.6.0 RC 2) radeonhd commit 9c8ab2dfbe61120298c4b46a2b49245c6779dbc2 drm commit 189cd825a8a2cc2c0a28023589a5f18a4122410b 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon HD 3870 (prog-if 00 [VGA controller]) Subsystem: PC Partner Limited Device e620 Flags: bus master, fast devsel, latency 0, IRQ 25 Memory at c0000000 (64-bit, prefetchable) [size=256M] Memory at ff1f0000 (64-bit, non-prefetchable) [size=64K] I/O ports at b000 [size=256] Expansion ROM at ff1c0000 [disabled] [size=128K] Capabilities: [50] Power Management version 3 Capabilities: [58] Express Legacy Endpoint, MSI 00 Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [100] Vendor Specific Information <?> Kernel driver in use: radeon Kernel modules: fglrx Any other things I can provide? -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 14

[Bug 20426] New: [REGRESSION] Lockup on Xv using 347b23d4 ( emit functions to macros)
by bugzilla-daemon＠freedesktop.org 17 Oct '11

17 Oct '11

http://bugs.freedesktop.org/show_bug.cgi?id=20426 Summary: [REGRESSION] Lockup on Xv using 347b23d4 (emit functions to macros) Product: xorg Version: 7.4 Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: agd5f(a)yahoo.com ReportedBy: zajec5(a)gmail.com QAContact: xorg-team(a)lists.x.org 01:00.0 VGA compatible controller: ATI Technologies Inc Mobility Radeon HD 3400 Series good: 89a835f03993da087c361de7ee3f6bc13bcb33f8 bad: 347b23d419c877de0ac95b1f2f69d6953dddfebd MPlayer window appears and before displaying first frame system lockups (display frozen, mouse cursor doesn't move smooth). -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 5

[Bug 21812] New: PM: Switch to registers (from AtomBIOS) for engine clock control
by bugzilla-daemon＠freedesktop.org 17 Oct '11

17 Oct '11

http://bugs.freedesktop.org/show_bug.cgi?id=21812 Summary: PM: Switch to registers (from AtomBIOS) for engine clock control Product: xorg Version: unspecified Platform: Other OS/Version: All Status: NEW Severity: enhancement Priority: low Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: zajec5(a)gmail.com QAContact: xorg-team(a)lists.x.org Currently we use AtomBIOS to control engine clock. Would be nice to RE or get from AMD registers needed to do the same without AtomBIOS. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 12

[Bug 22279] New: radeonhd reports error rhdAtomLvdsDDC: unknown record type: 0
by bugzilla-daemon＠freedesktop.org 17 Oct '11

17 Oct '11

http://bugs.freedesktop.org/show_bug.cgi?id=22279 Summary: radeonhd reports error rhdAtomLvdsDDC: unknown record type: 0 Product: xorg Version: 7.4 Platform: x86 (IA32) OS/Version: Linux (All) Status: NEW Severity: normal Priority: low Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: joy+freedesktop(a)entuzijast.net QAContact: xorg-team(a)lists.x.org Created an attachment (id=26762) --> (http://bugs.freedesktop.org/attachment.cgi?id=26762) log of startx -- -logverbose 7 Hi, I have a Lenovo Thinkpad T400 with this Radeon card: 01:00.0 VGA compatible controller: ATI Technologies Inc Mobility Radeon HD 3400 Series For some reason, the driver reports this error message in the log: (EE) RADEONHD(0): rhdAtomLvdsDDC: unknown record type: 0 (II) RADEONHD(0): Query for AtomBIOS Get Panel EDID: failed Oddly enough, I am able to see Panel modes in xrandr. I can't seem to force any modes upon my TV, connected via VGA_1, but that may well be an unrelated problem. The entire verbose Xorg log file is attached (300KB), and this is xrandr output under the same session: % xrandr -q Screen 0: minimum 320 x 200, current 1280 x 800, maximum 2640 x 1024 PANEL connected 1280x800+0+0 (normal left inverted right x axis y axis) 338mm x 211mm 1280x800 60.0*+ 1600x1024 60.2 1440x960Scaled 60.4 1280x1024 60.0 1280x1024Scaled 60.5 1440x900 59.9 1280x960 60.0 1280x960Scaled 60.4 1280x854Scaled 60.4 1360x768 59.8 1152x864 60.0 1280x720Scaled 60.4 1152x768Scaled 60.3 1024x768 60.0 1024x768Scaled 60.4 800x600 60.3 56.2 800x600Scaled 60.3 768x576Scaled 60.4 854x480Scaled 59.8 720x480Scaled 59.8 640x480 59.9 640x480Scaled 60.1 320x240Scaled 57.6 320x200Scaled 55.7 DVI-D_1 disconnected (normal left inverted right x axis y axis) VGA_1 disconnected (normal left inverted right x axis y axis) % xrandr --prop --verbose Screen 0: minimum 320 x 200, current 1280 x 800, maximum 2640 x 1024 PANEL connected 1280x800+0+0 (0x3e) normal (normal left inverted right x axis y axis) 338mm x 211mm Identifier: 0x3b Timestamp: 57897011 Subpixel: unknown Clones: DVI-D_1 VGA_1 CRTC: 0 CRTCs: 0 1 _HDMI: -1078027656 (0xbfbe9a78) range: (0,1) _Coherent: 15 (0x0000000f) range: (0,1) _Backlight: 207 (0x000000cf) range: (0,255) _PanningArea: _OutputNumber: 2 (0x00000002) ConnectorNumber: 2 (0x00000002) ConnectorType: Panel SignalFormat: LVDS supported: LVDS 1280x800 (0x3e) 69.2MHz *current +preferred h: width 1280 start 1328 end 1360 total 1404 skew 0 clock 49.3KHz v: height 800 start 803 end 809 total 822 clock 60.0Hz 1600x1024 (0x3f) 103.1MHz +HSync +VSync h: width 1600 start 1600 end 1656 total 1664 skew 0 clock 62.0KHz v: height 1024 start 1024 end 1029 total 1030 clock 60.2Hz 1440x960Scaled (0x40) 95.5MHz +HSync -VSync h: width 1440 start 1488 end 1520 total 1600 skew 0 clock 59.7KHz v: height 960 start 963 end 973 total 988 clock 60.4Hz 1280x1024 (0x41) 108.0MHz +HSync +VSync h: width 1280 start 1328 end 1440 total 1688 skew 0 clock 64.0KHz v: height 1024 start 1025 end 1028 total 1066 clock 60.0Hz 1280x1024Scaled (0x42) 91.8MHz +HSync -VSync h: width 1280 start 1328 end 1360 total 1440 skew 0 clock 63.7KHz v: height 1024 start 1027 end 1034 total 1054 clock 60.5Hz 1440x900 (0x43) 106.5MHz -HSync +VSync h: width 1440 start 1520 end 1672 total 1904 skew 0 clock 55.9KHz v: height 900 start 903 end 909 total 934 clock 59.9Hz 1280x960 (0x44) 108.0MHz +HSync +VSync h: width 1280 start 1376 end 1488 total 1800 skew 0 clock 60.0KHz v: height 960 start 961 end 964 total 1000 clock 60.0Hz 1280x960Scaled (0x45) 86.0MHz +HSync -VSync h: width 1280 start 1328 end 1360 total 1440 skew 0 clock 59.7KHz v: height 960 start 963 end 967 total 988 clock 60.4Hz 1280x854Scaled (0x46) 76.5MHz +HSync -VSync h: width 1280 start 1328 end 1360 total 1440 skew 0 clock 53.1KHz v: height 854 start 857 end 867 total 879 clock 60.4Hz 1360x768 (0x47) 84.8MHz -HSync +VSync h: width 1360 start 1432 end 1568 total 1776 skew 0 clock 47.7KHz v: height 768 start 771 end 781 total 798 clock 59.8Hz 1152x864 (0x48) 81.6MHz -HSync +VSync h: width 1152 start 1216 end 1336 total 1520 skew 0 clock 53.7KHz v: height 864 start 865 end 868 total 895 clock 60.0Hz 1280x720Scaled (0x49) 64.5MHz +HSync -VSync h: width 1280 start 1328 end 1360 total 1440 skew 0 clock 44.8KHz v: height 720 start 723 end 728 total 741 clock 60.4Hz 1152x768Scaled (0x4a) 62.5MHz +HSync -VSync h: width 1152 start 1200 end 1232 total 1312 skew 0 clock 47.6KHz v: height 768 start 771 end 781 total 790 clock 60.3Hz 1024x768 (0x4b) 65.0MHz -HSync -VSync h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.4KHz v: height 768 start 771 end 777 total 806 clock 60.0Hz 1024x768Scaled (0x4c) 56.5MHz +HSync -VSync h: width 1024 start 1072 end 1104 total 1184 skew 0 clock 47.7KHz v: height 768 start 771 end 775 total 790 clock 60.4Hz 800x600 (0x4d) 40.0MHz +HSync +VSync h: width 800 start 840 end 968 total 1056 skew 0 clock 37.9KHz v: height 600 start 601 end 605 total 628 clock 60.3Hz 800x600 (0x4e) 36.0MHz +HSync +VSync h: width 800 start 824 end 896 total 1024 skew 0 clock 35.2KHz v: height 600 start 601 end 603 total 625 clock 56.2Hz 800x600Scaled (0x4f) 35.8MHz +HSync -VSync h: width 800 start 848 end 880 total 960 skew 0 clock 37.2KHz v: height 600 start 603 end 607 total 618 clock 60.3Hz 768x576Scaled (0x50) 33.2MHz +HSync -VSync h: width 768 start 816 end 848 total 928 skew 0 clock 35.8KHz v: height 576 start 579 end 583 total 593 clock 60.4Hz 854x480Scaled (0x51) 30.2MHz +HSync -VSync h: width 854 start 902 end 934 total 1014 skew 0 clock 29.8KHz v: height 480 start 483 end 493 total 499 clock 59.8Hz 720x480Scaled (0x52) 26.2MHz +HSync -VSync h: width 720 start 768 end 800 total 880 skew 0 clock 29.8KHz v: height 480 start 483 end 493 total 499 clock 59.8Hz 640x480 (0x53) 25.2MHz -HSync -VSync h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz v: height 480 start 490 end 492 total 525 clock 59.9Hz 640x480Scaled (0x54) 23.8MHz +HSync -VSync h: width 640 start 688 end 720 total 800 skew 0 clock 29.7KHz v: height 480 start 483 end 487 total 494 clock 60.1Hz 320x240Scaled (0x55) 7.0MHz +HSync -VSync h: width 320 start 368 end 400 total 480 skew 0 clock 14.6KHz v: height 240 start 243 end 247 total 253 clock 57.6Hz 320x200Scaled (0x56) 5.8MHz +HSync -VSync h: width 320 start 368 end 400 total 480 skew 0 clock 12.0KHz v: height 200 start 203 end 209 total 215 clock 55.7Hz DVI-D_1 disconnected (normal left inverted right x axis y axis) Identifier: 0x3c Timestamp: 57897011 Subpixel: unknown Clones: PANEL VGA_1 CRTCs: 0 1 _HDMI: 0 (0x00000000) range: (0,1) _Coherent: 0 (0x00000000) range: (0,1) _Backlight: 15 (0x0000000f) range: (0,255) _PanningArea: _OutputNumber: 1 (0x00000001) ConnectorNumber: 1 (0x00000001) ConnectorType: DVI-D SignalFormat: TMDS supported: TMDS VGA_1 disconnected (normal left inverted right x axis y axis) Identifier: 0x3d Timestamp: 57897011 Subpixel: unknown Clones: PANEL DVI-D_1 CRTCs: 0 1 _PanningArea: _OutputNumber: 3 (0x00000003) ConnectorNumber: 3 (0x00000003) ConnectorType: VGA SignalFormat: VGA supported: VGA This is the static configuration: % grep '^[^#]' /etc/X11/xorg.conf Section "ServerLayout" Identifier "Normal" Screen "Jedan screen" EndSection Section "Screen" Identifier "Jedan screen" Device "ATI kartica" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Device" Identifier "ATI kartica" Driver "radeonhd" Option "DRI" "on" Option "AccelMethod" "exa" EndSection Section "ServerLayout" Identifier "Dvatri" Screen "Dvatri screena" EndSection Section "Screen" Identifier "Dvatri screena" Device "ATI kartica plus monitori" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 Virtual 2640 1024 EndSubSection EndSection Section "Device" Identifier "ATI kartica plus monitori" Driver "radeonhd" Option "DRI" "on" Option "AccelMethod" "exa" Option "monitor-PANEL" "Thinkpad screen" Option "monitor-DVI-D_1" "Samsung monitor" Option "monitor-VGA_1" "Sony TV" Option "RROutputOrder" "PANEL" EndSection Section "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "hr" EndSection Section "Monitor" Identifier "Thinkpad screen" Option "VendorName" "Lenovo" Option "ModelName" "LCD" Option "PreferredMode" "1280x800" EndSection Section "Monitor" Identifier "Samsung monitor" Option "VendorName" "Samsung" Option "ModelName" "LCD" Option "PreferredMode" "1280x1024" EndSection Section "Monitor" Identifier "Sony TV" Option "VendorName" "Sony" Option "ModelName" "LCD" Modeline "1360x768" 84.72 1360 1424 1568 1776 768 769 772 795 -HSync +Vsync Option "PreferredMode" "1360x768" EndSection Section "ServerFlags" Option "DefaultServerLayout" "Dvatri" EndSection Section "Files" EndSection Section "Module" EndSection -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 3

[Bug 21436] New: HW supports resolution 3840x1024 (works on WinXP) but it is not available in radeonhd
by bugzilla-daemon＠freedesktop.org 17 Oct '11

17 Oct '11

http://bugs.freedesktop.org/show_bug.cgi?id=21436 Summary: HW supports resolution 3840x1024 (works on WinXP) but it is not available in radeonhd Product: xorg Version: 7.4 Platform: x86 (IA32) OS/Version: Linux (All) Status: NEW Severity: major Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: phercek(a)gmail.com QAContact: xorg-team(a)lists.x.org xrandr reports that resolution 3840x1024 is not available. HW supports the resolution since it works well on WinXP (using digital interface). Not only it is not there by default but trying to force its addition with -newmode adds it only for the analog interface. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 7

[Bug 21700] New: Runing more then one X on single machine (single card) makes both X (and display) unusable.
by bugzilla-daemon＠freedesktop.org 17 Oct '11

17 Oct '11

http://bugs.freedesktop.org/show_bug.cgi?id=21700 Summary: Runing more then one X on single machine (single card) makes both X (and display) unusable. Product: xorg Version: 7.4 Platform: x86 (IA32) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: sauron(a)rpg.pl QAContact: xorg-team(a)lists.x.org Hi, When using RadeonHD with NO 2D acceleration I can run two X servers simultaneously. Yesterday I wanted to check XV (since I miss it a lot after I'v changed fglrx in favour of RadeonHD) - with single X server running - XV (exa) work's fine. But when I try to start second X server - everything mess up. First X server process eats all CPU, and after sending kill it become zombie :) Same thing with xaa. After turning 2D acceleration off, it's more or less ok, but from time to time, changing between X servers (ctrl+alt+[F7 F8]) freeze display completely. But killing X server process over SSH make's it (display) usable again. Vanilla kernel - 2.6.29.1 DRM GIT clone - 10.05.2009 ii xserver-common 2:1.6.1-1 common files used by various X servers ii xserver-xorg 1:7.4+1 the X.Org X server ii xserver-xorg-core 2:1.6.1-1 Xorg X server - core server ii xserver-xorg-input-all 1:7.4+1 the X.Org X server -- input driver metapacka ii xserver-xorg-input-evdev 1:2.2.2-1 X.Org X server -- evdev input driver ii xserver-xorg-input-kbd 1:1.3.2-3 X.Org X server -- keyboard input driver ii xserver-xorg-input-mouse 1:1.4.0-2 X.Org X server -- mouse input driver ii xserver-xorg-input-synaptics 1.1.0-1 Synaptics TouchPad driver for X.Org server ii xserver-xorg-input-wacom 0.8.3.2-1 X.Org X server -- Wacom input driver ii xserver-xorg-video-radeonhd 1.2.5-1 X.Org X server -- AMD/ATI r5xx, r6xx display xorg.conf: Section "Module" Load "i2c" Load "bitmap" Load "dbe" Load "extmod" Load "dri" EndSection Section "Device" Identifier "ATIHD2600XP" Driver "radeonhd" # Option "AccelMethod" "exa" # default shadowfb # Option "AccelMethod" "xaa" # default shadowfb # Option "DRI" "on" EndSection Hardware - RadeonHD2600xp (II) Setting vga for screen 0. (**) RADEONHD(0): Depth 24, (--) framebuffer bpp 32 (**) RADEONHD(0): Selected ShadowFB. (II) RADEONHD(0): Unknown card detected: 0x9586:0x174B:0x0028. If - and only if - your card does not work or does not work optimally please contact radeonhd(a)opensuse.org to help rectify this. Use the subject: 0x9586:0x174B:0x0028: <name of board> and *please* describe the problems you are seeing in your message. (--) RADEONHD(0): Detected an RV630 on an unidentified card (II) RADEONHD(0): Mapped IO @ 0xc0100000 to 0xb7acb000 (size 0x00010000) (II) RADEONHD(0): AGP Card Detected (II) RADEONHD(0): Getting BIOS copy from legacy VBIOS location (II) RADEONHD(0): ATOM BIOS Rom: SubsystemVendorID: 0x174b SubsystemID: 0x0028 IOBaseAddress: 0x2000 Filename: SR3E4402.032 BIOS Bootup Message: 113-3E4402-032 RV630 GDDR3_16MX32 128BIT 256MB 800E/700M ---- Side story: There Was properly working version of fglx 8.4 (but last kernel working with it was 2.6.22.19) - I could use two X servers running at once, both with XV/3D acceleration. Every later versions of fglrx (I'v finished on 9.1) where unable to open 2 x servers - running second one always ended with full hang up. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 3

[Bug 21137] New: timings out of range when switching back to text mode
by bugzilla-daemon＠freedesktop.org 17 Oct '11

17 Oct '11

http://bugs.freedesktop.org/show_bug.cgi?id=21137 Summary: timings out of range when switching back to text mode Product: xorg Version: unspecified Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: major Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: pht(a)spatium.org QAContact: xorg-team(a)lists.x.org radeonhd 1.2.5 (problem existed in 1.2.4 too) graphics card: radeon 4850 monitor: hp p1230 (CRT 22") w/DVI to DSUB adapter X boots up, I press ctrl-alt-f1, instead of going back to text mode, I'm getting timings out of range at my monitor (>200hz vert.), when I press ctrl-alt-f7 to get back to X, everything is okay. Same thing when switching to text mode for other reasons (eg. reboot). Text mode is okay after booting until X is started. I use a custom mode Mode "Custom1280x1024" DotClock 244.00 HTimings 1280 1296 1440 1736 VTimings 1024 1025 1028 1075 EndMode but i experience this bug with standard VESA modes as well. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 3

[Bug 22242] New: RadeonHD not working with Mobility Radeon 3650 HD
by bugzilla-daemon＠freedesktop.org 17 Oct '11

17 Oct '11

http://bugs.freedesktop.org/show_bug.cgi?id=22242 Summary: RadeonHD not working with Mobility Radeon 3650 HD Product: xorg Version: unspecified Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: glen.nelson.1(a)gmail.com QAContact: xorg-team(a)lists.x.org It will go into low graphics mode, and display the following error: "Ubuntu is running low-graphics mode The following error was encountered. You may need to update your configuration to solve this. (EE) RADEONHD(0): rhdAtomLvdsDDC: Unknown Record Type: f8 (EE) RADEONHD(0): D1CRTCDisable: Failed to Unsync CRTC 1 (EE) RADEONHD(0): rhdALLIdle: Unable to stop CRTC: Cannot idle MC" Here is the xorg.0.log http://pastebin.com/ma649c14 Here are the directions I was following: https://help.ubuntu.com/community/RadeonHD -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 10

[Bug 19077] New: 0x94C1:0x1458:0x2190:Gigabyte Radeon HD 2400 XT
by bugzilla-daemon＠freedesktop.org 17 Oct '11

17 Oct '11

http://bugs.freedesktop.org/show_bug.cgi?id=19077 Summary: 0x94C1:0x1458:0x2190:Gigabyte Radeon HD 2400 XT Product: xorg Version: unspecified Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: bruce(a)untroubled.org QAContact: xorg-team(a)lists.x.org Created an attachment (id=21132) --> (http://bugs.freedesktop.org/attachment.cgi?id=21132) Xorg.0 log file This card has no output on the DVI port. Output is fine on the VGA port to the same monitor. It also defaults to 60Hz refresh by default, even though the display is capable of 75Hz. This problem is present in both the current GIT sources and version 1.2.3. Xorg log file is attached. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 8