March 2009 - Radeon HD - openSUSE Mailing Lists

[Bug 19861] New: second screen in multi seat config zig-zag problems
by bugzilla-daemon＠freedesktop.org 24 Oct '11

24 Oct '11

http://bugs.freedesktop.org/show_bug.cgi?id=19861 Summary: second screen in multi seat config zig-zag problems Product: xorg Version: 7.2 Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: freedesktop(a)veninga.familiemail.nl QAContact: xorg-team(a)lists.x.org Created an attachment (id=22421) --> (http://bugs.freedesktop.org/attachment.cgi?id=22421) xorg log of first screen I have two radeon 4650 card in a multi seat configuration. My first problem was getting the second card to work. I did the following: # turn on second card if [ -e /sys/bus/pci/devices/0000\:02\:00.0/enable ] then if [ `cat /sys/bus/pci/devices/0000\:02\:00.0/enable` == '0' ] then echo 1 > /sys/bus/pci/devices/0000\:02\:00.0/enable echo 1 > /sys/bus/pci/devices/0000\:02\:00.0/rom fi fi The second card now sort of works. The screen will start, but the picture is not correct. For instance a diagonal line gets a large zig-zag. See these pictures: correct gdm screen on first monitor: http://jvfoto.mine.nu/half_p2011045.jpg wrong gdm screen on second monitor: http://jvfoto.mine.nu/half_p2011046.jpg note the zig-zag arc, the flower being positioned of screen and strange printing of the words "Welcome" and "Username". If I use the fglrx driver on the second screen everything looks allright, but I have other problems with that setup, for instance not being able to restart the X-server. I first tried the release version 1.2.4. Now I have tested the current git version (2009-01-31) with the same results. I have attached a tar file with: Xorg.0.log for the first screen Xorg.1.log for the second screen (wrong) xorg.conf with the used configuration and the two screenshots -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 4

[Bug 20470] New: UploadToScreen causes corruption
by bugzilla-daemon＠freedesktop.org 22 Oct '11

22 Oct '11

http://bugs.freedesktop.org/show_bug.cgi?id=20470 Summary: UploadToScreen causes corruption Product: xorg Version: unspecified Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: thoemy(a)gmail.com QAContact: xorg-team(a)lists.x.org Created an attachment (id=23533) --> (http://bugs.freedesktop.org/attachment.cgi?id=23533) Some pictures of mouse cursors Hi, after the DFS and UTS hooks were enabled I experienced corruption. The corruption affects the mouse cursor, sometimes window decorations, nearly always the buttons in firefox, sometimes the desktop background, sometimes launchers in the gnome-panel and other things. Attached are screenshots that demonstrate how the corruption looks. The corruption of the mouse cursor is not visible on screenshots so I took them with a digital camera. The stripes appear only on the right of the cursor and it changes if I move the cursor into another text input box. The corruptions are not very serious. I didn't complained until yet because I was busy and I hoped that the problem gets fixed. Disabling the UTS hook fixes the corruptions. Unfortunately the whole desktop is then very unresponsive. The first bad commit was f1b9c19683090272a29a3e4c9e2c054b4a32b47c (R6xx/R7xx EXA: add accelerated UTS/DFS hooks) Some information about my system: X.Org X Server 1.5.99.902 (1.6.0 RC 2) radeonhd commit 9c8ab2dfbe61120298c4b46a2b49245c6779dbc2 drm commit 189cd825a8a2cc2c0a28023589a5f18a4122410b 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon HD 3870 (prog-if 00 [VGA controller]) Subsystem: PC Partner Limited Device e620 Flags: bus master, fast devsel, latency 0, IRQ 25 Memory at c0000000 (64-bit, prefetchable) [size=256M] Memory at ff1f0000 (64-bit, non-prefetchable) [size=64K] I/O ports at b000 [size=256] Expansion ROM at ff1c0000 [disabled] [size=128K] Capabilities: [50] Power Management version 3 Capabilities: [58] Express Legacy Endpoint, MSI 00 Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [100] Vendor Specific Information <?> Kernel driver in use: radeon Kernel modules: fglrx Any other things I can provide? -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 14

[Bug 20426] New: [REGRESSION] Lockup on Xv using 347b23d4 ( emit functions to macros)
by bugzilla-daemon＠freedesktop.org 17 Oct '11

17 Oct '11

http://bugs.freedesktop.org/show_bug.cgi?id=20426 Summary: [REGRESSION] Lockup on Xv using 347b23d4 (emit functions to macros) Product: xorg Version: 7.4 Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: agd5f(a)yahoo.com ReportedBy: zajec5(a)gmail.com QAContact: xorg-team(a)lists.x.org 01:00.0 VGA compatible controller: ATI Technologies Inc Mobility Radeon HD 3400 Series good: 89a835f03993da087c361de7ee3f6bc13bcb33f8 bad: 347b23d419c877de0ac95b1f2f69d6953dddfebd MPlayer window appears and before displaying first frame system lockups (display frozen, mouse cursor doesn't move smooth). -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 5

[Bug 19077] New: 0x94C1:0x1458:0x2190:Gigabyte Radeon HD 2400 XT
by bugzilla-daemon＠freedesktop.org 17 Oct '11

17 Oct '11

http://bugs.freedesktop.org/show_bug.cgi?id=19077 Summary: 0x94C1:0x1458:0x2190:Gigabyte Radeon HD 2400 XT Product: xorg Version: unspecified Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: bruce(a)untroubled.org QAContact: xorg-team(a)lists.x.org Created an attachment (id=21132) --> (http://bugs.freedesktop.org/attachment.cgi?id=21132) Xorg.0 log file This card has no output on the DVI port. Output is fine on the VGA port to the same monitor. It also defaults to 60Hz refresh by default, even though the display is capable of 75Hz. This problem is present in both the current GIT sources and version 1.2.3. Xorg log file is attached. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 8

[Bug 19338] New: r6xx-r7xx branch X Server Crashes on Startup with ATI Radeon HD 2600
by bugzilla-daemon＠freedesktop.org 17 Oct '11

17 Oct '11

http://bugs.freedesktop.org/show_bug.cgi?id=19338 Summary: r6xx-r7xx branch X Server Crashes on Startup with ATI Radeon HD 2600 Product: xorg Version: git Platform: x86 (IA32) OS/Version: Linux (All) Status: NEW Severity: critical Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: shlomif(a)iglu.org.il QAContact: xorg-team(a)lists.x.org Created an attachment (id=21566) --> (http://bugs.freedesktop.org/attachment.cgi?id=21566) My Xorg.0.log As the attached Xorg.0.log demonstrates after compiling the r6xx-r7xx branch and installing it under /usr, the Xorg crashes on startup (after the screen blackens, but before I see anything). I'm on Mandriva Linux Cooker (the Mandriva bleeding-edge). My XServer version is x11-server-xorg-1.5.3-8mdv2009.1 and I'm using: {{{{ Linux telaviv1.shlomifish.org 2.6.28-desktop-0.rc8.1mnb #1 SMP Fri Dec 12 15:53:52 EST 2008 i686 Intel(R) Pentium(R) 4 CPU 2.40GHz GNU/Linux }}}} My card is: 01:00.0 VGA compatible controller: ATI Technologies Inc RV630 PRO AGP [Radeon HD 2600 PRO AGP] -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 6

[Bug 19649] New: Second monitor not detected
by bugzilla-daemon＠freedesktop.org 17 Oct '11

17 Oct '11

http://bugs.freedesktop.org/show_bug.cgi?id=19649 Summary: Second monitor not detected Product: xorg Version: git Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: jhs(a)jsschmid.de QAContact: xorg-team(a)lists.x.org On my setup: - Asus D2 X EAH3650 SIL Magic/Htdp Radeon card - a ViewSonic monitor (connected to DVI-0) - a LG Monitor (connected to DVI-1 with DVI-to-HDMI adapter) xrandr -q has the following output when both are connected: Screen 0: minimum 320 x 200, current 1680 x 1050, maximum 3360 x 1050 DVI-I_1/digital connected 1680x1050+0+0 474mm x 296mm 1680x1050 60.0*+ 1400x1050 74.8 70.0 60.0 60.0 1280x1024 75.0 59.9 60.0 1440x900 60.0 59.9 1280x960 60.0 59.9 1360x768 59.8 1152x864 75.0 75.0 74.9 70.0 60.0 1024x768 75.1 75.0 70.1 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 640x480 75.0 72.8 72.8 75.0 66.7 60.0 59.9 720x400 70.1 640x400 69.2 DVI-I_1/analog disconnected TV_7PIN_DIN disconnected DVI-I_2/digital disconnected DVI-I_2/analog disconnected xrandr -q with only the second monitor attached: Screen 0: minimum 320 x 200, current 1680 x 1050, maximum 3360 x 1050 DVI-I_1/digital disconnected 1680x1050+0+0 474mm x 296mm DVI-I_1/analog disconnected TV_7PIN_DIN disconnected DVI-I_2/digital disconnected DVI-I_2/analog disconnected 1680x1050 (0x40) 146.2MHz h: width 1680 start 1784 end 1960 total 2240 skew 0 clock 65.3KHz v: height 1050 start 1053 end 1059 total 1089 clock 60.0Hz For radeonHD the lastest available driver from https://launchpad.net/~tormodvolden/+archive is used together with stock Ubuntu Intrepid X-Server. Windows has some issues with detected the LG, too, though it works fine on boot-up (e.g. before any graphical interface is started...) -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 2

[Bug 14500] New: External monitor does not display native resolution
by bugzilla-daemon＠freedesktop.org 17 Oct '11

17 Oct '11

http://bugs.freedesktop.org/show_bug.cgi?id=14500 Summary: External monitor does not display native resolution Product: xorg Version: unspecified Platform: x86 (IA32) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: fry.kun(a)gmail.com QAContact: xorg-team(a)lists.x.org My external monitor has native resolution 1680x1050. Autodetection appears to use mode 1280x1024 79KHz/75Hz (read from monitor's menu). I've tried getting help in the #radeonhd IRC channel in December - setting the ModeLine in xorg.conf seemed to force 1680x1050 mode, but the image was still not displayed correctly (it was squished/offset horizontally). This problem does not appear with current fglrx driver, although it appeared with some older drivers. (Don't know if this information is helpful in this case..) Hardware: laptop - Dell Inspiron e1505 videocard - 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility X1400 -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 64

[Bug 17671] New: OpenGL+EXA causes screen corruption
by bugzilla-daemon＠freedesktop.org 16 Oct '11

16 Oct '11

http://bugs.freedesktop.org/show_bug.cgi?id=17671 Summary: OpenGL+EXA causes screen corruption Product: xorg Version: unspecified Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: sparkybluefang(a)gmail.com QAContact: xorg-team(a)lists.x.org Created an attachment (id=19028) --> (http://bugs.freedesktop.org/attachment.cgi?id=19028) Screen corruption while using compiz First, I apologize if there already is a bug for this. I looked, but I didn't see anything that caught my eye. I recently switched to using EXA (XVideo doesn't work under XAA, but that's another issue) and I discovered that OpenGL applications (glxgears, compiz-fusion, stepmania, etc) cause screen corruption. Exiting the OpenGL app and switching away then back to the X VT corrects the corruption. This doesn't happen under XAA, and I tried using "UnverifiedFeatures" (from reading another topic) but that didn't help. I'm using git sources, XOrg 7.4/1.5, Mesa 7.2 rc1, 2.6.26 kernel with gentoo patches -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 13

[Bug 20146] New: r6xx-r7xx-support: second radeonhd card initialization failed
by bugzilla-daemon＠freedesktop.org 16 Oct '11

16 Oct '11

http://bugs.freedesktop.org/show_bug.cgi?id=20146 Summary: r6xx-r7xx-support: second radeonhd card initialization failed Product: xorg Version: unspecified Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: major Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: kl(a)stat.phys.spbu.ru QAContact: xorg-team(a)lists.x.org Created an attachment (id=22995) --> (http://bugs.freedesktop.org/attachment.cgi?id=22995) Xorg.0.log I have a multiseat configuration based on two pci/e radeonhd cards (primary:RS780, secondary:rv710). Both cards are working fine with radeonhd-1.2.4, but when i try r6xx-r7xx-support radeonhd brunch to get 2D hardware acceleration only primary videocard was initialized. I try to initialize videocards separately, but this does not help also. The initialization of secondary chip(rv710) finished with the messages ===================================================================== (--) RADEONHD(0): Detected an RV710 on an unidentified card (II) RADEONHD(0): Mapped IO @ 0xfe7f0000 to 0x7fc084b5c000 (size 0x00010000) (II) RADEONHD(0): PCIE Card Detected (II) RADEONHD(0): Getting BIOS copy from legacy VBIOS location (II) RADEONHD(0): ATOM BIOS Rom: SubsystemVendorID: 0x1002 SubsystemID: 0x1002 IOBaseAddress: 0xb000 Filename: M3A78T_D_1.b BIOS Bootup Message: B27722 RS780D DDR2 200e/500m (II) RADEONHD(0): Analog TV Default Mode: 4294967040 (EE) RADEONHD(0): No Video RAM detected. (II) UnloadModule: "radeonhd" (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found ===================================================================== As i can see radeonhd driver try to use ATOM BIOS of primary videochip to boot secondary videochip. As result it did not find videoram and failed. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 5

[Bug 20593] New: radeonhd driver generates unaligned traps on Alpha
by bugzilla-daemon＠freedesktop.org 16 May '11

16 May '11

http://bugs.freedesktop.org/show_bug.cgi?id=20593 Summary: radeonhd driver generates unaligned traps on Alpha Product: xorg Version: git Platform: Alpha OS/Version: Linux (All) Status: NEW Severity: minor Priority: low Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: mcree(a)orcon.net.nz QAContact: xorg-team(a)lists.x.org CC: mcree(a)orcon.net.nz The radeonhd driver generates unaligned traps on Alpha architecture. These are not a show stopper, but do incur very inefficient memory accesses via kernel traps, and pollute the kernel logs with annoying messages. Using radeonhd at git df71658688e47614a3f660c28ac1dc77970eb491 But the version is irrelevant as the misaligned memory accesses have been there for a long time - I have been too lazy to report them until now. >From dmesg: X(2015): unaligned trap at 0000020000903088: 000002000098c5d7 28 1 X(2015): unaligned trap at 0000020000903088: 000002000098c5df 28 1 X(2015): unaligned trap at 0000020000903088: 000002000098c5e7 28 1 X(2015): unaligned trap at 0000020000903088: 0000020000989771 28 1 Connecting gdb to the running X process reveals the culprit: (gdb) list *0x0000020000903088 0x20000903088 is in GetParametersDirect32 (AtomBios/CD_Operations.c:441). 436 } 437 438 UINT32 GetParametersDirect32(PARSER_TEMP_DATA STACK_BASED * pParserTempData) 439 { 440 pParserTempData->CD_Mask.SrcAlignment=alignmentDword; 441 pParserTempData->Index=*(UINT32*)pParserTempData->pWorkingTableData->IP; 442 pParserTempData->pWorkingTableData->IP+=sizeof(UINT32); 443 return pParserTempData->Index; 444 } 445 Line 441 is a 32bit (long word) access. The address dereferenced is not aligned to a 32bit boundary for an unaligned trap to occur. The ati driver is worse. It coughs up unaligned traps from GetParametersDirect16() and GetParametersRegister() too, but I haven't seen these from radeonhd. Cheers Michael. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

3 10