March 2008 - Radeon HD - openSUSE Mailing Lists

Re: [radeonhd] Re: Regression since Jan 27th radeonhd
by Adam Williamson 27 Mar '08

27 Mar '08

On Thu, 2008-03-27 at 07:35 +0530, JoJo jojo wrote: > (EE) RADEONHD(0): Failed to detect a connected monitor > you need to ask him about conntest output Here's the reply: rhd_conntest -s 03:0.0 rhd_conntest: v1.1.0, non-git sources Checking connectors on 0x724B, 0x1002, 0x0B12 (@03:00:00): Load Detection: RHD_OUTPUT_NONE HotPlug: RHD_HPD_0 DDC: RHD_DDC_1 DDC Line[1]: Slaves: 6e a0 a2 a4 a6 a8 aa ac ae -- adamw -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 0

Regression since Jan 27th radeonhd
by Adam Williamson 27 Mar '08

27 Mar '08

Sorry for the slightly wide date range, but... I had an apparent regression reported by a Mandriva development community member (Charles Edwards). He reports that his device worked with radeonhd on February 19th (at which point we were using a Jan 27th git snapshot) and does not work now (we are now using a March 25th snapshot). His xorg.conf is here: http://www.eslrahc.com/xorg.conf.radeonhdd His Xorg.0.log is here: http://www.eslrahc.com/Xorg.0.log I will now ask him what monitor(s) he has, connected to which port(s). Is there any further info that may be required? Thanks. -- adamw -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 1

Re: [radeonhd] help for: Failed to detect a connected monitor
by Axel Burwitz 26 Mar '08

26 Mar '08

On Tuesday 25 March 2008 16:57:24 you wrote: > On Mar 25, 08 15:15:29 +0100, Axel Burwitz wrote: > >> try ./configure CFLAGS="-I/usr/local/include" > > > > there is no "./configure" in FreeBSD. You have to make an entry for > > CFLAGS > > I mean in the radeonhd driver directory, of course. > > > ="-I/usr/local/include" > > > > in the /etc/make.conf file and run make then. Have done that, and that > > led to: > > "/usr/bin/ld: cannot find -lpci > > Ok, try -I/usr/local/include -L/usr/local/lib > > Matthias I tried with now both entries -I/usr/local/include and -L/usr/local/lib for CFLAGS in /etc/make.conf and tried to run mke, but this time it says "configure script can't find /usr/local/lib" (but it IS there, I have checked that!!) Now, as I think that does not take us any further, I tried something else: I have installed SUSE OSS 11.0 Alpha3 on a separate disk. Great display output. Perfect resolution. Monitor type and model perfectly recognised. I checked /etc/X11/xorg.conf, and: radeonhd driver is used! I ran rhd_conntest and attach the output (+ 2 files which I am not sure if have been produced by rhd_conntest) Axel

1 0

suscribe
by gwr 26 Mar '08

26 Mar '08

-- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 0

Re: [radeonhd] TV out via VGA connector
by Egbert Eich 26 Mar '08

26 Mar '08

Lucas Clemente Vella writes: > In the preliminary code for TV Out found on git repository, it seems > to be assumed that the TV is connected in a TV-specific connector: > > src/rhd_monitor.c: > else if (Connector->Type == RHD_CONNECTOR_TV) > Monitor = rhdMonitorTV(Connector); > > Can't rhdMonitorTV() be called on a VGA connector? There should be a > way to determine if a TV is connected through a VGA to video > component/SVideo adaptor. The current code uses the connector table information which lists explicite TV connectors. An additional logic to handle TV over VGA would have to be added. Cheers, Egbert. -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

4 6

0x71C1:0x1002:0x2352: Radeon X1650
by Jonathan Steel 26 Mar '08

26 Mar '08

I have a readon X1650 and one of my monitors works great. But the one attached to the dvi is not properly setting its resolution. Its getting stuck at 1280x1024. Here is my Xorg.0.log. What the problem? Thanks -- Using Opera's revolutionary e-mail client: http://www.opera.com/mail/

2 1

Re: [radeonhd] TV out via VGA connector
by Egbert Eich 26 Mar '08

26 Mar '08

Matthias Hopf writes: > On Mar 24, 08 22:54:05 +0100, Egbert Eich wrote: > > > Can't rhdMonitorTV() be called on a VGA connector? There should be a > > > way to determine if a TV is connected through a VGA to video > > > component/SVideo adaptor. > > > > The current code uses the connector table information which > > lists explicite TV connectors. > > An additional logic to handle TV over VGA would have to be > > added. > > AFAIK a VGA/component adaptor has to have additional electronics, and > should thus be handled like a general monitor. /me thinks. > > Or is there a way to use sync_on_green so that G, B, R can be sent to > Y, Pb, Pr, respectively? I thought the 0 level is different for both > signals. > There are cards (FireGL) which come with a YCrCb adaptor to plug into the DVI-I port. Checking how those adaptors are wired up revealed that the 3 signals are connected to the RGB signal lines on the connector. According to the register specs DACA and DACB are identical regarding TV support. Usually DACB is connected to the TVout connector(s) on a card. I discovered when doing load detection tests that DACB doesn't respond when a monitor is connected to the VGA out but no TV is connected to the TV connector of DACB when DACB is in TV mode. This is different for DACA: there I see a load when TV mode is activated but an analog monitor is connected to it. Cheers, Egbert. -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

2 1

0x7146:0x174B:0x0920: Sapphire Radeon X1300
by Andrew Cattau 26 Mar '08

26 Mar '08

I am experimenting with the "radeonhd" driver on my Debian Etch workstation, and I noticed the following in the log output: (**) RADEONHD(0): Depth 24, (--) framebuffer bpp 32 (**) RADEONHD(0): Option "HPD" "swap" (WW) RADEONHD(0): !!! Option HPD is set !!! This shall only be used to work around broken connector tables. Please report your findings to radeonhd(a)opensuse.org (II) RADEONHD(0): Unknown card detected: 0x7146:0x174B:0x0920. If - and only if - your card does not work or does not work optimally please contact radeonhd(a)opensuse.org to help rectify this. Use the subject: 0x7146:0x174B:0x0920: <name of board>. (--) RADEONHD(0): Detected an RV515 on an unidentified card The video card is a Sapphire Radeon X1300. I don't have the box anymore, but the packing slip that came with it says: Sapphire Radeon X1300 PCI Express 256MB DDR Video Card w/TV-Out, DVI & VGA Retail So far the driver is working OK for me, although I did have to add the following line to my xorg.conf: Option "HPD" "swap" It is possible (although I think unlikely) that this could also be due to the IOGEAR DVI KVM switch that I am using. The KVM switch occasionally causes me problems with autodetection, although so far I've only noticed problems if I first start X / boot windows while the KVM switch has a different host selected, as the resolution of my display will not be detected properly. Please let me know if I can provide more information. Xorg.log and xorg.conf files attached # /etc/X11/xorg.conf (xorg X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the /etc/X11/xorg.conf manual page. # (Type "man /etc/X11/xorg.conf" at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg Section "Files" FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/X11R6/lib/X11/fonts/misc" FontPath "/usr/share/fonts/X11/cyrillic" FontPath "/usr/X11R6/lib/X11/fonts/cyrillic" FontPath "/usr/share/fonts/X11/100dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/share/fonts/X11/75dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/X11R6/lib/X11/fonts/Type1" FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/X11R6/lib/X11/fonts/100dpi" FontPath "/usr/share/fonts/X11/75dpi" FontPath "/usr/X11R6/lib/X11/fonts/75dpi" # path to defoma fonts FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" EndSection Section "Module" Load "i2c" Load "bitmap" Load "ddc" Load "dri" Load "extmod" Load "freetype" Load "glx" Load "int10" Load "vbe" EndSection Section "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "CoreKeyboard" Option "XkbRules" "xorg" Option "XkbModel" "pc104" Option "XkbLayout" "us" EndSection Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "CorePointer" Option "Device" "/dev/input/mice" Option "Protocol" "ImPS/2" Option "Emulate3Buttons" "true" EndSection Section "Device" Identifier "ATI X1300" #Driver "fglrx" #BusID "PCI:1:0:0" #Option "VideoOverlay" "on" #Option "OpenGLOverlay" "off" Driver "radeonhd" Option "HPD" "swap" EndSection Section "Monitor" Identifier "DELL 2407WFP" Option "DPMS" EndSection Section "Screen" Identifier "Default Screen" Device "ATI X1300" Monitor "DELL 2407WFP" DefaultDepth 24 SubSection "Display" Depth 1 Modes "1920x1200" "1600x1200" "1280x1024" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 4 Modes "1920x1200" "1600x1200" "1280x1024" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "1920x1200" "1600x1200" "1280x1024" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 15 Modes "1920x1200" "1600x1200" "1280x1024" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "1920x1200" "1600x1200" "1280x1024" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "1920x1200" "1600x1200" "1280x1024" "1024x768" "800x600" "640x480" EndSubSection EndSection Section "ServerLayout" Identifier "Default Layout" Screen "Default Screen" InputDevice "Generic Keyboard" InputDevice "Configured Mouse" EndSection Section "Extensions" #Option "Composite" "Disable" Option "XVideo" "Enable" EndSection Section "DRI" Mode 0666 EndSection

2 3

Re: [radeonhd] Re: 0x7146:0x1545:0x2350: Visiontek ATI Radeon X1550 256MB PCI Video card
by Egbert Eich 26 Mar '08

26 Mar '08

Ben Taylor writes: > On Wed, Mar 26, 2008 at 2:07 AM, Ben Taylor <bentaylor.solx86(a)gmail.com> wrote: > > > > On Mon, Mar 24, 2008 at 6:35 PM, Egbert Eich <eich(a)suse.de> wrote: > > > > > > Ben Taylor writes: > > > > On Sat, Mar 22, 2008 at 8:12 AM, Ben Taylor <bentaylor.solx86(a)gmail.com> wrote: > > > > > On Solaris Express, build 85, this board was not recognized. A message stated: > > > > > > > > > > Detected an RV515 on an unidentifiied card. > > > > > > > > I built the latest driver out of git, and got the same error message. Ideas? > > > > It seems that most x1550's are supported, but this PCI version appears to > > > > have a PCI to PCI-Express bridge. Is that the reason radeonhd is not > > > > recognizing it? > > > > > > > > > > Hi Ben, > > > > > > The chipset is detected. Just not the PnP ID of the card. > > > It should work. If it doesn't please post the entire log. > > > > Ok. Downloaded GIT head, compiled and installed the module. > > Created a default xorg.conf file using /usr/X11/bin/Xorg -configure > > then started /usr/X11/bin/Xorg -logverbose 7 with only the DVI > > cable connected, and then did the same test with only the VGA > > cable connected. I got output on the VGA port, and did not > > get anything on the DVI. > > > > As an aside, I have also tried a modified version of the driver > > adding an entry for 0x7166 (paralleling the 0x7146 device > > id). When I did this, and ran Xorg -configure, it configured > > 3 screens, the Nvidia and both x1550 screens. I was then > > able to start Xorg and get a screen on the DVI port as well, > > but I'm suspecting that my novice attempt at adding support > > is probably not the right attempt. If anyone wants the > > xorg.conf and Xorg.0.log file, I can provides those as well. > > forgot the xorg.conf and Xorg.0.log files.... > > Ben >From the first run (with the analog monitor attached): > > (II) RADEONHD(1): AtomBIOS Connector[0]: DVI-I Device: CRT1 Output: 1 HW DDC 0 NO HPD > (II) RADEONHD(1): AtomBIOS Connector[2]: SVIDEO Device: TV1 Output: 2 NO DDC NO HPD > (II) RADEONHD(1): AtomBIOS Connector[4]: VGA Device: CRT2 Output: 2 HW DDC 1 NO HPD > (II) RADEONHD(1): AtomBIOS Connector[9]: DVI-I Device: DFP3 Output: 4 HW DDC 1 HPD 1 > (II) RADEONHD(1): Connector[0] {RHD_CONNECTOR_DVI, "DVI-I CRT1", RHD_DDC_0, RHD_HPD_NONE, { RHD_OUTPUT_DACA, RHD_OUTPUT_NONE } } > (II) RADEONHD(1): Connector[1] {RHD_CONNECTOR_TV, "SVIDEO TV1", DDC_NONE, RHD_HPD_NONE, { RHD_OUTPUT_DACB, RHD_OUTPUT_NONE } } > (II) RADEONHD(1): Connector[2] {RHD_CONNECTOR_VGA, "VGA CRT2", RHD_DDC_1, RHD_HPD_NONE, { RHD_OUTPUT_DACB, RHD_OUTPUT_NONE } } > (II) RADEONHD(1): Connector[3] {RHD_CONNECTOR_DVI, "DVI-I DFP3", RHD_DDC_1, RHD_HPD_1, { RHD_OUTPUT_LVTMA, RHD_OUTPUT_NONE } } This connector table is indeed strange. It suggests that you have 2 DVI connectors (one only having an analog output (DVI-A but listed as DVI-I), the other only having a digital output (DVI-D but listed as DVI-I). Additionally it suggests you have separate VGA and a TV output. Thus you would have 4 connectors on your card. Could you please a) describe the connector(s) on your card b) run rhd_conntest (in utils/conntest) once with the analog and once with the DVI device detected and post the outputs of both runs here. ... > (II) RADEONHD(1): I2C device "RHD I2C line 0:ddc2" removed. > (II) RADEONHD(1): EDID data for Acer X243W > (II) RADEONHD(1): Manufacturer: ACR Model: 0 Serial#: 1946158808 DDC for the analog monitor seems to work. >From the run with the DVI device: > (II) RADEONHD(1): rhdRROutputDetect: Output DVI-D_2 > (II) RADEONHD(1): Output DVI-D_2 disconnected > (II) RADEONHD(1): EDID for output DVI-D_2 > (II) RADEONHD(1): Output DVI-A_1 disconnected So no EDID data for this connector was found. If you send us the rhd_conntest data we should be able to determine how to 'fix' the connector table. Cheers, Egbert. -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 0

Re: [radeonhd] radeonhd Sapphire HD3650: no devices detected [the end]
by Georges 26 Mar '08

26 Mar '08

>>> Luc Verhaegen. >>> SUSE/Novell X Driver Developer. > > If you're using Debian, install the "xfonts-base" package and try again. > > HTH, > -- > khorben > Hi Luc, Thanks a lot man, I can work now, X is up and fine and debian is ok. May the source be with everybody. Have a good Day. Georges -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 0