January 2008 - Radeon HD - openSUSE Mailing Lists

[Bug 13621] New: RadeonHD should list more modes in XRandR for build-in LCD
by bugzilla-daemon＠freedesktop.org 27 Feb '08

27 Feb '08

http://bugs.freedesktop.org/show_bug.cgi?id=13621 Summary: RadeonHD should list more modes in XRandR for build-in LCD Product: xorg Version: git Platform: Other OS/Version: All Status: NEW Severity: enhancement Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: pkern(a)debian.org QAContact: xorg-team(a)lists.x.org radeonhd (git) correctly detects the LCD's native mode and sets it: Screen 0: minimum 320 x 200, current 1680 x 1050, maximum 1680 x 1680 VGA_1 disconnected PANEL connected 1680x1050+0+0 331mm x 207mm 1680x1050 60.1*+ TV_SVIDEO disconnected DVI-D_1 disconnected However, especially for presentations, it's somewhat helpful when one's able to set it to a non-widescreen resolution. This works with fglrx, but not (yet) with radeonhd. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 3

Re: [radeonhd] Re: [hd2600pro] unknown card detected
by Jerome Quelin 25 Feb '08

25 Feb '08

(oops, seems that i forgot to keep radeonhd(a)opensuse.org in cc: - fixed) On 07/12/19 19:42 +0100, Luc Verhaegen wrote: > On Wed, Dec 19, 2007 at 07:29:43PM +0100, Jerome Quelin wrote: > > On 07/12/19 19:01 +0100, Luc Verhaegen wrote: > > > Hrm, this seems very much like an issue we had with certain R5xxen, > > > which we fixed by selecting electrical values which were different than > > > what crappy atombios would've set up ;) > > > > > > But before i go poke there, i would like to verify the values that > > > atombios would've set up for you. > > > > > > Can you provide me with a copy of your bios? rhd_conntest -d should get > > > this for you. > > > > finally got to compile it... > > > > here's its output: > > > > # ./rhd_conntest -d 1:0.0 > > rhd_conntest: v1.0.0, non-git sources > > Checking connectors on 0x9589, 0x1462, 0x0930 (@01:00:00): > > Load Detection: RHD_OUTPUT_TMDSA > > HotPlug: RHD_HPD_0 RHD_HPD_2 > > DDC: RHD_DDC_1 > > I needed the romimage that this should've created :) oh, sure. sorry, i don't know the tool. you'll find it attached. jérôme -- jquelin(a)gmail.com

3 7

[PATCH] Unclone the outputs
by Loic Grenie 24 Feb '08

24 Feb '08

All the outputs on my card are cloned. This patch unclones most of the outputs, keeping cloned only the outputs with same "Output". Namely - VGA has no clone (output is DAC A) - S_VIDEO and DVI-I/analog are clones (output is DAC B) - DVI-I/digital has no clone (output is TMDS B) I don't know whether DVI-I/digital should be a clone of S_VIDEO and DVI-I/analog (I don't have a DVI-I splitter to test whether the 2 outputs are independent). I don't know whether the possible_crts should be modified as well. Thanking you all, Loïc Grenié --- src/rhd_randr.c | 7 ++++++- 1 files changed, 6 insertions(+), 1 deletions(-) diff --git a/src/rhd_randr.c b/src/rhd_randr.c index 8a6d643..aee5b3a 100644 --- a/src/rhd_randr.c +++ b/src/rhd_randr.c @@ -94,6 +94,7 @@ typedef struct _rhdRandrOutput { char Name[64]; struct rhdConnector *Connector; struct rhdOutput *Output; + int clones; } rhdRandrOutputRec, *rhdRandrOutputPtr; #define ATOM_SIGNAL_FORMAT "RANDR_SIGNAL_FORMAT" @@ -1039,7 +1040,7 @@ createXF86Output(ScrnInfoPtr pScrn, rhdRandrOutputPtr rro) ASSERT(xo); xo->driver_private = rro; xo->possible_crtcs = ~0; /* No limitations */ - xo->possible_clones = ~0; /* No limitations */ + xo->possible_clones = rro->clones; xo->interlaceAllowed = FALSE; xo->doubleScanAllowed = FALSE; xo->subpixel_order = SubPixelUnknown; @@ -1143,6 +1144,10 @@ RHDRandrPreInit(ScrnInfoPtr pScrn) randr->RandrOutput = xnfcalloc(numCombined+1, sizeof(struct xf86OutputPtr *)); for (i = 0; i < numCombined; i++) { + RandrOutput[i]->clones = 0; + for (j = 0; j < numCombined; j++) + if (RandrOutput[j]->Output == RandrOutput[i]->Output) + RandrOutput[i]->clones |= 1 << j; randr->RandrOutput[i] = createXF86Output(pScrn, RandrOutput[i]); } xfree(RandrOutput); -- 1.5.2.5 -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

3 3

PATCH: Report PANEL as disconnected when no modes are available
by Thomas Meyer 21 Feb '08

21 Feb '08

Report PANEL as disconnected when no modes are available diff --git a/src/rhd_randr.c b/src/rhd_randr.c index 8a6d643..1bbc0e7 100644 --- a/src/rhd_randr.c +++ b/src/rhd_randr.c @@ -749,8 +749,12 @@ rhdRROutputDetect(xf86OutputPtr output) RHDDebug(rhdPtr->scrnIndex, "%s: Output %s\n", __func__, rout->Name); /* Assume that a panel is always connected */ - if (rout->Connector->Type == RHD_CONNECTOR_PANEL) - return XF86OutputStatusConnected; + if (rout->Connector->Type == RHD_CONNECTOR_PANEL) { + if (rout->Connector->Monitor) + return XF86OutputStatusConnected; + else + return XF86OutputStatusDisconnected; + } if (rout->Connector->HPDCheck) { /* Hot Plug Detection available, use it */ -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

2 3

any power saving modes possible?
by Alex Thorsten 19 Feb '08

19 Feb '08

Hi, first of all thanks for the great work! I have though one issue. Is there any way to change the clock speed of the chip running the radeonhd driver? My T60p (FireGL V5250 - apparently as M56/M66CSP256G detected) has quite sever problems with power usage/heat. If not, will it be possible in the near future? Thanks a lot again! Best regards, Alex Thorsten -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

2 1

Success with Xaa on V5250 (M66, 0x71D4)
by Chris Rankin 19 Feb '08

19 Feb '08

Hi, I have successfully enabled XAA on my Thinkpad T60p. Here is the Xorg.0.log file. Cheers, Chris P.S. I disabled the Monitor line in the Screen section, as before. Is this still strictly necessary, please? __________________________________________________________ Sent from Yahoo! Mail - a smarter inbox http://uk.mail.yahoo.com

3 2

0x7211:0x107B:0x0290: Radeon Mobility X2100.
by Andrei Barbu 19 Feb '08

19 Feb '08

Hi, I have a Gateway tablet with a Radeon Mobility X2100. The radeonhd driver works aside from an issue with xrandr. I can't switch the orientation of the screen. It also complains that it my card is unknown. andrei@tensor ~/Desktop $ xrandr -o left X Error of failed request: BadMatch (invalid parameter attributes) Major opcode of failed request: 155 (RANDR) Minor opcode of failed request: 2 (RRSetScreenConfig) Serial number of failed request: 12 Current serial number in output stream: 12 I attached my xorg log with loglevel 7. I am running the latest xrandr from git, I've tried it with 1.2 as well (there don't seem to be any relevant patches between the two versions though). Any other information I can provide? Thanks, Andrei

2 1

Release 1.0.0 has been tagged!
by Luc Verhaegen 13 Feb '08

13 Feb '08

Yes, you read the git commit mail correctly, we have a tag that isn't 0.0x :) The full tarball is at: ftp://ftp.freedesktop.org/pub/individual/driver/xf86-video-radeonhd-1.0.0.t… But i guess that most people here build from git anyway, which is going to continue to be the main place for getting up to date source, and getting the fixes to issues you still might see (and we still see quite a few). So with this release pushed out, we will start adding some features again, as in the last week we have only been fixing problems and issues. Anyway, have fun with this, uncover all the bugs in it, and put them on our TODO list (if they aren't there already, that is :)) Luc Verhaegen. SUSE/Novell X Driver Developer. -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

2 3

Re: [radeonhd] Radeon X1900 XT
by Egbert Eich 07 Feb '08

07 Feb '08

Juha Tuomala writes: > > > I've dualhead card, and I guess it's not deteceted properly. In IRC people > suggested sending conntest output here. > Thank you for the data. I guess the card should be detected correctly without any changes. Therefore maybe you can attach your log file so that we can see what went wrong. Cheers, Egbert. -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

2 1

[Bug 13853] New: occasional blackouts
by bugzilla-daemon＠freedesktop.org 05 Feb '08

05 Feb '08

http://bugs.freedesktop.org/show_bug.cgi?id=13853 Summary: occasional blackouts Product: xorg Version: 7.3 Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: prusnik(a)gmail.com QAContact: xorg-team(a)lists.x.org Since the 1.1.x series (or maybe even with the 1.0.x), I have a strange behaviour: the screen would occasionally go blank all of the sudden without any trace in the available logs. What helps is a switch to terminal (CTRL-ALT-F1 or any other) and then back (CTRL-ALT-F7). This just returns the picture and I can continue where I left off (no restarting of Xorg there or logging out and in again). It has no pattern so I cannot reproduce it at will. It just happens. :) If nothing will be found, I'll switch this bug to Solved/Invalid once it stops occuring. Configuration: OS: Debian testing, up-to-date HW: Asus M2N-E, AMD X2 4200, Gigabyte X1300PRO (RV515) -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 52