November 2007 - Radeon HD - openSUSE Mailing Lists

statusreport ASUS pundit2 AM2-690G (RS690)
by Mark Struberg 15 Dec '07

15 Dec '07

Hi! Just like to provide a status update of Asus Pundit AM2-690G onboard graphic card 0x791E:0x1043:0x8287 reported as X1250 RS690. The board has one VGA plus one HDMI connector on the PCB. 1.) radeonhd (todays git) works fine with VGA on my LG L2000CE TFT (so no xorg.log attached). 2.) On a Sony Bravia 720p Panel (native resolution 1366 x 768) it basically works but cuts off a few pixels left and right (i guess its cutted down to 1280, xorg.log attached). 3.) Obviously HDMI refuses to work completely since the whole RS690 doc is still missing as Luc pointed out a few days ago. I've attached the xorg log for the bravia over VGA and conntests with connected vga and another with htmi. txs and br, strub __________________________________ Ihr erstes Baby? Holen Sie sich Tipps von anderen Eltern. www.yahoo.de/clever

5 7

Re: [radeonhd] New Card Asus EAH2400PRO PCIe
by Egbert Eich 15 Dec '07

15 Dec '07

Stefan Hellermann writes: > I've tried radeonhd now the third time, but this time it works! Thanks! Awesome! > > Card: Asus EAH2400PRO PCIe > > My main-screen is a Flatpanel connected to the DVI-port, to test xrandr I > connected an old CRT to the VGA-port, it got detected and enabled instantly in > clone-mode. Then I tried "xrandr --output DVI-I_1/digital --auto --right-of > VGA_1" and it works like a charm! TV-Out doesn't work yet. TV out isn't supported yet. > When switching to console the monitors switch to standby-mode, switching back to > Xorg switches them on again. I assume they were not in standby mode when X started. Do you see any 'out of range' message on the monitor? Cheers, Egbert. -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

3 4

RV515 card failed to output video on VGA port
by Wu, Lisa 15 Dec '07

15 Dec '07

Dear Radeonhd developer, I have met a problem on my RV515 card, below is the steps to reproduce it: 1) connect a DFP monitor to DVI port and a CRT monitor to VGA port 2) boot ubuntu 7.10 3) startx with radeonhd 4) DFP monitor start alright, while my CRT monitor failed to put out video. (attach Xorg.0.log-CRT-fail for detailed information) Here is another test that will bring up video on CRT monitor 1) only connect CRT monitor to VGA port 2) boot ubuntu 7.10 3) startx with radeonhd 4) CRT monitor starts alright (attach Xorg.0.log-CRT-OK for detailed information) Thanks as always for your great help and hard work! Best Regards, Lisa Wu

6 14

Re: [radeonhd] statusreport ASUS pundit2 AM2-690G (RS690)
by Egbert Eich 14 Dec '07

14 Dec '07

Denise H. G. writes: > > Hi > > I've got an RS690 chip with pci id 0x791E. It is onboard vga shipped > with Asus M2A-VM motherboard. By using radeonhd driver I also got VSync > problems. And I found that for RS690 we should not write ZERO to the > register D1CRTC_V_SYNC_A, otherwise the screen will blank off on VT > switching. We can safely write non-zero Values to D1CRTC_V_SYNC_A but > never ZERO. Anyway, this works for my chip. I don't know if will apply > to yours. > Writing 0 to D1CRTC_V_SYNC_A is certainly wrong. It will most likely lead to the behavior you are seeing. You said you are seeing a blank screen on restore - Did you find out when this is written? Did this happen during restore? Cheers, Egbert. -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

3 5

[Bug 13366] New: When connect external monitor after X start color lines are mixed on it
by bugzilla-daemon＠freedesktop.org 13 Dec '07

13 Dec '07

http://bugs.freedesktop.org/show_bug.cgi?id=13366 Summary: When connect external monitor after X start color lines are mixed on it Product: xorg Version: 7.3 Platform: Other OS/Version: FreeBSD Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: vova(a)fbsd.ru QAContact: xorg-team(a)lists.x.org xrandr -q Screen 0: minimum 320 x 200, current 2680 x 1050, maximum 3280 x 1050 PANEL_LCD1/LVDS unknown connection 1400x1050+0+0 305mm x 228mm 1400x1050 60.0*+ 74.8 60.0 50.0 1600x1024 60.0 1280x1024 85.0 75.0 59.9 60.0 1280x960 85.0 60.0 1152x864 75.0 1152x768 54.8 1024x768 85.0 75.0 70.1 60.0 832x624 74.6 800x600 85.1 72.2 75.0 60.3 56.2 640x480 85.0 72.8 75.0 60.0 59.9 720x400 85.0 640x400 85.1 640x350 85.1 VGA_CRT1/DAC_A connected 1280x1024+1400+0 376mm x 301mm 1280x1024 60.0*+ 75.0 59.9 1280x960 59.9 1152x864 75.0 74.8 1024x768 75.1 70.1 60.0 832x624 74.6 800x600 72.2 75.0 60.3 xrandr -q Screen 0: minimum 320 x 200, current 2680 x 1050, maximum 3280 x 1050 PANEL_LCD1/LVDS unknown connection 1400x1050+0+0 305mm x 228mm 1400x1050 60.0*+ 74.8 60.0 50.0 1600x1024 60.0 1280x1024 85.0 75.0 59.9 60.0 1280x960 85.0 60.0 1152x864 75.0 1152x768 54.8 1024x768 85.0 75.0 70.1 60.0 832x624 74.6 800x600 85.1 72.2 75.0 60.3 56.2 640x480 85.0 72.8 75.0 60.0 59.9 720x400 85.0 640x400 85.1 640x350 85.1 VGA_CRT1/DAC_A connected 1280x1024+1400+0 376mm x 301mm 1280x1024 60.0*+ 75.0 59.9 1280x960 59.9 1152x864 75.0 74.8 1024x768 75.1 70.1 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 640x480 75.0 72.8 66.7 60.0 720x400 70.1 DVI-I_DFP1/TMDS_A disconnected 56.2 640x480 75.0 72.8 66.7 60.0 720x400 70.1 DVI-I_DFP1/TMDS_A disconnected No xrandr options/reconfigurations help me. After X restart - everithing works fine -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 12

Problems with radeonhd-driver on GeCube Radeon HD 2400PRO AGP
by Boris Kleibl 13 Dec '07

13 Dec '07

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I'm using the radeonhd driver built from git on my debian sid. First of all I tried the ATI proprietary driver, because I wanted a dual-head configuration, but it fails to initialize OpenGL. When trying the radeonhd-driver it works, but it is not possible to set 1600x1200 screen resolution. Perhaps because the card is not detected correctly (as shown in the attached Xorg.0.log)? My card is a GeCube Radeon HD 2400PRO AGP (GC-RX24PGA2-D3): http://www.gecube.com/products-detail.php?prod_cat_pid=198&prod_cat_id=199&…. Greetings from Vienna Boris Kleibl - -- > ===============================================================< Boris Kleibl > ===============================================================< address1: Aegidigasse 19/15, A-1060 Wien, Austria address2: Nordbahnstraße 21, A-2136 Laa/Thaya, Austria > ---------------------------------------------------------------< phone: +43.699.81804002 FAX: +49.1805.4002.159014 > ---------------------------------------------------------------< e-mail: mailto:boris.kleibl@gmx.at mailto:boris.kleibl@gmail.com GnuPG: http://keyserver.veridis.com:11371 Key-ID: 0x33295BD5 ICQ#: 127391093 Skype: dochofa URL: http://www.zifotronic.org/ Org.: ZIFOTRONIC productions, Austria. > ---------------------------------------------------------------< Don't panic! > ---------------------------------------------------------------< -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) iD8DBQFHRp030N5esjMpW9URApDXAJ9Sod7FKI8U8Xu+EMoR9kecSNg9aACdGfFN myXGWvslT2mKyqYRoWTvkOs= =+EOM -----END PGP SIGNATURE-----

4 18

[patch] Make DVI work on Asus M2A-VM
by Johann Hanne 12 Dec '07

12 Dec '07

Hi all, the attached patch (and #defining USE_ID_CONNECTORS) makes DVI work on my Asus M2A-VM... Cheers, Johann

2 2

ASUS A8Jp, Mobility Radeon X1700 - DVI-connected monitor doesn't work
by Kirill Belokurov 11 Dec '07

11 Dec '07

Hi! Tested setup is the following: - Mobility Radeon X1700, internal panel 1440x900, the external TFT monitor 1024x768 is connected before startup of the Xorg - recent git master for radeonhd After Xorg startup, the panel is initialized properly and displays login window, the TFT monitor stays black and power indicator is blinking (apparently no signal). I am attaching the full Xorg log to email (compressed as it is unusually large - see below ). Here is the only error message from the radeonhd driver in Xorg log: $grep EE Xorg.0.log | grep -i radeon (EE) RADEONHD(0): D1CRTCDisable: Failed to Unsync CRTC 1 (EE) RADEONHD(0): TMDSAVoltageControl: unhandled chipset: 0x71D5. (EE) RADEONHD(0): TMDSAVoltageControl: unhandled chipset: 0x71D5. rhd_connect output: ========================================= # ./rhd_conntest 01:00.0 rhd_conntest: v0.0.4, git branch master, commit da4783c9 Checking connectors on 0x71D5, 0x1043, 0x1242 (@01:00:00): Load Detection: RHD_OUTPUT_TMDSA HotPlug: RHD_HPD_0 DDC: RHD_DDC_1 LVDS Info: 18bits, dual link, LDI Panel found. Power Timing: 0xF9F, 0x000, 0x03, 0x20, 0x1F4 Macro: 0x0C720407, Clock Pattern: 0x0063 DDC Line[1]: Slaves: 6e a0 ========================================= Also, is it normal that Xorg.0.log is so large? I see e.g. the external monitor seems to be queried many times: ========================== $grep HMDY913757 Xorg.0.log (II) RADEONHD(0): Serial No: HMDY913757 (II) RADEONHD(0): Serial No: HMDY913757 (II) RADEONHD(0): Serial No: HMDY913757 (II) RADEONHD(0): Serial No: HMDY913757 (II) RADEONHD(0): Serial No: HMDY913757 (II) RADEONHD(0): Serial No: HMDY913757 (II) RADEONHD(0): Serial No: HMDY913757 (II) RADEONHD(0): Serial No: HMDY913757 (II) RADEONHD(0): Serial No: HMDY913757 (II) RADEONHD(0): Serial No: HMDY913757 (II) RADEONHD(0): Serial No: HMDY913757 (II) RADEONHD(0): Serial No: HMDY913757 (II) RADEONHD(0): Serial No: HMDY913757 (II) RADEONHD(0): Serial No: HMDY913757 (II) RADEONHD(0): Serial No: HMDY913757 (II) RADEONHD(0): Serial No: HMDY913757 (II) RADEONHD(0): Serial No: HMDY913757 (II) RADEONHD(0): Serial No: HMDY913757 ========================== Best regards, Kirill

4 14

Re: [ANNOUNCE] xf86-video-radeonhd 1.0.0 - INITIAL RELEASE (fwd)
by Matthias Hopf 11 Dec '07

11 Dec '07

Ndim + Luc, you might want to look into that. Juan, was this patch necessary for you to get the connector table right? Because we only want to add cards in this table that have a broken one. Matthias -- Matthias Hopf <mhopf(a)suse.de> __ __ __ Maxfeldstr. 5 / 90409 Nuernberg (_ | | (_ |__ mat(a)mshopf.de Phone +49-911-74053-715 __) |_| __) |__ R & D www.mshopf.de

4 11

[Bug 13468] New: radeonhd driver causes slight video-garble on screen
by bugzilla-daemon＠freedesktop.org 11 Dec '07

11 Dec '07

http://bugs.freedesktop.org/show_bug.cgi?id=13468 Summary: radeonhd driver causes slight video-garble on screen Product: xorg Version: git Platform: x86 (IA32) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: Zeqadious(a)gmail.com QAContact: xorg-team(a)lists.x.org On my ATI Mobility X1600 [M56] (Acer TravelMate 8200), when using the latest radeonhd driver from git or even stable 1.0.0, I have a verticle garble of video in the center of my screen (1680x1050) and another to the upper right location of my screen. I am not very knowledgeable about Xorg and the different settings so my initial thoughts are likely not the case, but for the 2 cents, I think it might have to do with xrandr reporting h-sync or v-sync's inappropriately. I would love to help find the solution to this problem as I am sure it probably exists for someone else too. Zeq -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 3