May 2024 - openSUSE Kernel Bugs - openSUSE Mailing Lists

[Bug 1221512] scanner MFC-J5620DW not anymore recognized by xsane or YaST2
by bugzilla_noreply＠suse.com 22 May '24

22 May '24

https://bugzilla.suse.com/show_bug.cgi?id=1221512 https://bugzilla.suse.com/show_bug.cgi?id=1221512#c3 David Walker <David(a)WalkerStreet.info> changed: What |Removed |Added ---------------------------------------------------------------------------- Flags|needinfo? | --- Comment #3 from David Walker <David(a)WalkerStreet.info> --- Good question. I don't do a lot of scanning, so I don't remember the last time I could scan successfully, but I tried kernels 6.8.7-1-default and 6.8.4-rc1-1-default, and both had the same problem. So, I did a little searching and found that there is a sane-airscan-unstable in home:pzz. I installed it, and scanning works again. Can this report be reassigned to get the version of sane-airscan in Tumbleweed updated? Also, there's no aarch64 build, and I normally do my scanning from a Raspberry Pi 4 system, so aarch64 would be greatly appreciated. (I can report either or both of these separately, if that's better.) -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1224808] dracut incorrectly modify btrfs compression level for /
by bugzilla_noreply＠suse.com 22 May '24

22 May '24

https://bugzilla.suse.com/show_bug.cgi?id=1224808 https://bugzilla.suse.com/show_bug.cgi?id=1224808#c8 --- Comment #8 from Frederic Crozat <fcrozat(a)suse.com> --- It was also broken with kernel 6.8.9 on MicroOS -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1224808] dracut incorrectly modify btrfs compression level for /
by bugzilla_noreply＠suse.com 22 May '24

22 May '24

https://bugzilla.suse.com/show_bug.cgi?id=1224808 https://bugzilla.suse.com/show_bug.cgi?id=1224808#c7 --- Comment #7 from Antonio Feijoo <antonio.feijoo(a)suse.com> --- Observed: > [ 1.415049] localhost kernel: BTRFS: device label ROOT devid 1 transid 65 /dev/vda3 (254:3) scanned by mount (450) > [ 1.415283] localhost kernel: BTRFS info (device vda3): first mount of filesystem 0ccd61f9-7e1a-4329-9b48-04673b6ba623 > [ 1.415292] localhost kernel: BTRFS info (device vda3): using crc32c (crc32c-intel) checksum algorithm > [ 1.415295] localhost kernel: BTRFS info (device vda3): using free-space-tree > [ 1.757878] localhost systemd[1]: Switching root. > [ 2.935997] localhost kernel: BTRFS info (device vda3 state M): use zstd compression, level 1 > ... > [ 3.179772] localhost systemd[1]: Mounting /.snapshots... > [ 3.180726] localhost kernel: BTRFS info (device vda3 state M): use compression, level 0 -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1224808] dracut incorrectly modify btrfs compression level for /
by bugzilla_noreply＠suse.com 22 May '24

22 May '24

https://bugzilla.suse.com/show_bug.cgi?id=1224808 https://bugzilla.suse.com/show_bug.cgi?id=1224808#c6 Antonio Feijoo <antonio.feijoo(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Assignee|dracut-maintainers(a)suse.de |kernel-bugs(a)opensuse.org --- Comment #6 from Antonio Feijoo <antonio.feijoo(a)suse.com> --- (In reply to Antonio Feijoo from comment #5) > But, I'm testing this with SL Micro, I'll download the latest MicroOS > snapshot later and check if I can reproduce it. Ok, my bad, I should've tested this with MicroOS since the beginning, I can reproduce it with snapshot 20240520. > localhost:~ # grep -m1 compress= /proc/self/mountinfo > 64 1 0:36 /(a)/.snapshots/2/snapshot / ro,relatime shared:1 - btrfs /dev/vda3 rw,seclabel,compress=,discard=async,space_cache=v2,subvolid=268,subvol=/(a)/.snapshots/2/snapshot There was not any change in dracut that could affect this between the version shipped with SL Micro and the latest Factory version, and the arguments in dracut look ok: > May 22 13:05:43 localhost dracut-cmdline[233]: dracut-059+suse.588.g528264be-1.1 > May 22 13:05:43 localhost dracut-cmdline[233]: Using kernel command line parameters: ... rootfstype=btrfs rootflags=ro,compress=zstd:1 ... Also, `findmnt` reports the right options on the running system: > localhost:~ # findmnt --fstab -e -v -n -o 'OPTIONS' --target / ro,compress=zstd:1 But, /proc/self/mountinfo trims the value of compress=... So, I guess this should be an issue with kernel 6.9.1-1-default (it works with 6.4.0-17-default). -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1224457] Kernel: Sound: AMD cpu with graphics + ASUS motherboard with ALC 887
by bugzilla_noreply＠suse.com 22 May '24

22 May '24

https://bugzilla.suse.com/show_bug.cgi?id=1224457 Takashi Iwai <tiwai(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Assignee|kernel-bugs(a)opensuse.org |tiwai(a)suse.com -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1224368] New: RCU not on for: amd_e400_idle+0x4/0x30
by bugzilla_noreply＠suse.com 22 May '24

22 May '24

https://bugzilla.suse.com/show_bug.cgi?id=1224368 Bug ID: 1224368 Summary: RCU not on for: amd_e400_idle+0x4/0x30 Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: wegao(a)suse.com QA Contact: qa-bugs(a)suse.de Target Milestone: --- Found By: --- Blocker: --- run opensuse-Tumbleweed-x86_64-20240514-DVD(a)64bit-with-ltp.qcow2 with following qemu parameter. qemu-system-x86_64 -smp cores=4 -m 1024 -s -nodefaults -device virtio-rng-pci -nographic -serial mon:stdio -display none \ -drive file=$1,if=virtio \ -device e1000,netdev=net0 -netdev user,id=net0,hostfwd=tcp::5555-:22 susetest:/sys/kernel/debug/tracing # echo function_graph > current_tracer [ 271.226973][ T0] ------------[ cut here ]------------ [ 271.229804][ T0] RCU not on for: amd_e400_idle+0x4/0x30 [ 271.229804][ T0] WARNING: CPU: 0 PID: 0 at include/linux/trace_recursion.h:162 prepare_ftrace_return+0x15e/0x170 [ 271.229804][ T0] Modules linked in: joydev st sr_mod cdrom nls_iso8859_1 nls_cp437 exfat vfat fat bcachefs lz4_compress lz4hc_compress xfs ext4 mbcacg [ 271.229804][ T0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.8.9-1-default #1 openSUSE Tumbleweed bdefa5c8548782cd7f40c96ed6ab2e9359be7133 [ 271.229804][ T0] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-6-gb1b30830-rebuilt.opensuse.org 04/01/2014 [ 271.229804][ T0] RIP: 0010:prepare_ftrace_return+0x15e/0x170 [ 271.229804][ T0] Code: 8b 04 25 40 a1 03 00 48 81 a0 08 23 00 00 ff ff fe ff eb a2 4c 89 e6 48 c7 c7 57 30 7b 8e c6 05 eb a6 00 02 01 e8 02 36 03 00 0 [ 271.229804][ T0] RSP: 0018:ffffffff8f003d90 EFLAGS: 00000082 [ 271.229804][ T0] RAX: 0000000000000000 RBX: ffffffff8f003e78 RCX: 0000000000000027 [ 271.229804][ T0] RDX: 00000000000a414d RSI: 0000000000000001 RDI: ffff9b67bea27800 [ 271.229804][ T0] RBP: ffffffff8f003db8 R08: 0000000000000000 R09: ffffffff8f003c38 [ 271.229804][ T0] R10: ffffffff8f003c30 R11: 0000000000000003 R12: ffffffff8d2552b4 [ 271.229804][ T0] R13: 0000000000000000 R14: ffffffff8f010980 R15: 0000000000000000 [ 271.229804][ T0] FS: 0000000000000000(0000) GS:ffff9b67bea00000(0000) knlGS:0000000000000000 [ 271.229804][ T0] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 271.229804][ T0] CR2: 000055f646b2ba80 CR3: 0000000004acc000 CR4: 00000000000006f0 [ 271.229804][ T0] Call Trace: [ 271.229804][ T0] <TASK> [ 271.229804][ T0] ? prepare_ftrace_return+0x15e/0x170 [ 271.229804][ T0] ? ftrace_stub_direct_tramp+0x20/0x20 [ 271.229804][ T0] ? __warn+0x81/0x130 [ 271.229804][ T0] ? prepare_ftrace_return+0x15e/0x170 [ 271.229804][ T0] ? report_bug+0x171/0x1a0 [ 271.229804][ T0] ? handle_bug+0x3c/0x80 [ 271.229804][ T0] ? exc_invalid_op+0x17/0x70 [ 271.229804][ T0] ? asm_exc_invalid_op+0x1a/0x20 [ 271.229804][ T0] ? amd_e400_idle+0x4/0x30 [ 271.229804][ T0] ? prepare_ftrace_return+0x15e/0x170 [ 271.229804][ T0] joydev_init+0x8b/0xff0 [joydev 0a00000089e2ffff000000002000000000000000] [ 271.229804][ T0] ? amd_e400_idle+0x9/0x30 [ 271.229804][ T0] amd_e400_idle+0x9/0x30 [ 271.229804][ T0] default_idle_call+0x2c/0xe0 [ 271.229804][ T0] do_idle+0x226/0x270 [ 271.229804][ T0] cpu_startup_entry+0x2a/0x30 [ 271.229804][ T0] rest_init+0xd0/0xd0 [ 271.229804][ T0] arch_call_rest_init+0xe/0x30 [ 271.229804][ T0] start_kernel+0x70b/0xa60 [ 271.229804][ T0] x86_64_start_reservations+0x18/0x30 [ 271.229804][ T0] x86_64_start_kernel+0x96/0xa0 [ 271.229804][ T0] secondary_startup_64_no_verify+0x184/0x18b [ 271.229804][ T0] </TASK> [ 271.229804][ T0] ---[ end trace 0000000000000000 ]--- -- You are receiving this mail because: You are the assignee for the bug.

1 4

[Bug 1224457] New: Kernel: Sound: AMD cpu with graphics + ASUS motherboard with ALC 887
by bugzilla_noreply＠suse.com 22 May '24

22 May '24

https://bugzilla.suse.com/show_bug.cgi?id=1224457 Bug ID: 1224457 Summary: Kernel: Sound: AMD cpu with graphics + ASUS motherboard with ALC 887 Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.5 Hardware: x86-64 OS: openSUSE Leap 15.5 Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: andrwlms(a)gmail.com QA Contact: qa-bugs(a)suse.de Target Milestone: --- Found By: --- Blocker: --- Installation of Leap 15.5 or Tumbleweed on a machine with an AMD APU on an ASUS Prime B550-Plus (uses Realtek ALC 887 for sound) results in no sound from the motherboard. This is discussed in a thread on openSuSE forums: English language, Hardware forum, "5700G+ALC887" thread title. This has been explored with aplay -l, inxi -Axx, dmesg | grep snd_hda, lsmod and modprobe. It is apparently a matter of detection of the motherboard sound "card" in the presence of the CPU's integrated sound "card". This is apparently a bug in the kernel, not openSuSE, since installation of Linux Mint on the same hardware causes exactly the same problem, including identical output from aplay -l, inxi -Axx and dmesg | grep snd_hda. -- You are receiving this mail because: You are the assignee for the bug.

1 6

[Bug 1222578] MicroOS enters emergency.target when rebooted by transactional-update
by bugzilla_noreply＠suse.com 21 May '24

21 May '24

https://bugzilla.suse.com/show_bug.cgi?id=1222578 https://bugzilla.suse.com/show_bug.cgi?id=1222578#c3 Takashi Iwai <tiwai(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |tiwai(a)suse.com --- Comment #3 from Takashi Iwai <tiwai(a)suse.com> --- That sounds weird. Can you reproduce the problem by transaction-update of a single kernel package 6.8.2? -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1222578] MicroOS enters emergency.target when rebooted by transactional-update
by bugzilla_noreply＠suse.com 21 May '24

21 May '24

https://bugzilla.suse.com/show_bug.cgi?id=1222578 Chenzi Cao <chcao(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Component|Basesystem |Kernel Assignee|screening-team-bugs(a)suse.de |kernel-bugs(a)opensuse.org -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1224769] Update failure
by bugzilla_noreply＠suse.com 21 May '24

21 May '24

https://bugzilla.suse.com/show_bug.cgi?id=1224769 Andreas Stieger <Andreas.Stieger(a)gmx.de> changed: What |Removed |Added ---------------------------------------------------------------------------- Component|Maintenance |Kernel Assignee|screening-team-bugs(a)suse.de |kernel-bugs(a)opensuse.org -- You are receiving this mail because: You are the assignee for the bug.

1 0