August 2023 - openSUSE Kernel Bugs - openSUSE Mailing Lists

[Bug 1214073] [Build 20230807] kernel 6.4.8 complains about ACPI and stops loading
by bugzilla_noreply＠suse.com 08 Aug '23

08 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1214073 https://bugzilla.suse.com/show_bug.cgi?id=1214073#c1 Takashi Iwai <tiwai(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Flags| |needinfo?(ilgaz(a)ilgaz.gen.t | |r) CC| |ilgaz(a)ilgaz.gen.tr, | |tiwai(a)suse.com --- Comment #1 from Takashi Iwai <tiwai(a)suse.com> --- That ACPI message doesn't appear when you reboot with the older 6.4.x kernel? In anyway, please give the dmesg from the old kernel as well as hwinfo output. Then, boot the new kernel with "nomodeset" boot option for disabling the graphics. If it's about nouveau, it should continue to boot. Then give the dmesg output from there, too. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1214042] the wifi driver included in the kernel does not work correctly, and you have to manually add the one from the intel side
by bugzilla_noreply＠suse.com 08 Aug '23

08 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1214042 https://bugzilla.suse.com/show_bug.cgi?id=1214042#c2 Takashi Iwai <tiwai(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED CC| |tiwai(a)suse.com Resolution|--- |WONTFIX --- Comment #2 from Takashi Iwai <tiwai(a)suse.com> --- Tumbleweed is a rolling release and it takes the latest upstream code as well as the upstream firmware. You are likely misinformed. Please reopen if anything particular bug has to be fixed instead. Thanks. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1214049] USB audio dies after idle
by bugzilla_noreply＠suse.com 08 Aug '23

08 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1214049 https://bugzilla.suse.com/show_bug.cgi?id=1214049#c1 Takashi Iwai <tiwai(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |aaron.w2(a)gmail.com, | |tiwai(a)suse.com Flags| |needinfo?(aaron.w2(a)gmail.co | |m) --- Comment #1 from Takashi Iwai <tiwai(a)suse.com> --- Please give the dmesg output including the error. Also, please try to boot with the older kernel that worked (while keeping the rest system as is), and verify whether the bug doesn't happen with it -- i.e. confirming it's a kernel regression. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1212874] External Monitor on USB-C Docking station AMD Graphics
by bugzilla_noreply＠suse.com 08 Aug '23

08 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1212874 https://bugzilla.suse.com/show_bug.cgi?id=1212874#c8 --- Comment #8 from Takashi Iwai <tiwai(a)suse.com> --- The fix isn't included yet in TW release. As already mentioned, check the rpm changelog. And, for verifying whether your problem is as same as Ingo, please test the kernel in comment 4. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1214013] Shutdown did not finish (PC was not powered off, no obvious error logged)
by bugzilla_noreply＠suse.com 08 Aug '23

08 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1214013 https://bugzilla.suse.com/show_bug.cgi?id=1214013#c2 --- Comment #2 from Ulrich Windl <Ulrich.Windl(a)rz.uni-regensburg.de> --- (In reply to Takashi Iwai from comment #1) > Is the issue reproducible reliably? If yes, can you verify whether the bug > persists when you boot with Leap 15.4 kernel instead? Actually I'm unsure whether at that (shutdown/power-off) point it's systemd handing over to dracut (and then to kernel) to power off, or talking to the kernel directly. Somehow I think it's not the kernel, but I can try... So far the issue happened two times (ot of two attempt to power off); that is 100% 8-( -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1212209] New: VirtualBox broken in Kernel 6.3.6-1-default
by bugzilla_noreply＠suse.com 08 Aug '23

08 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1212209 Bug ID: 1212209 Summary: VirtualBox broken in Kernel 6.3.6-1-default Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: x86-64 OS: openSUSE Tumbleweed Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: snettlet(a)gmail.com QA Contact: qa-bugs(a)suse.de Target Milestone: --- Found By: --- Blocker: --- VirtualBox broken in Kernel 6.3.6-1-default ... reinstall all VirtualBox files and still broken ... start computer using previous Kernel 6.3.4-1-default and everything works fine again -- You are receiving this mail because: You are the assignee for the bug.

1 14

[Bug 1214042] the wifi driver included in the kernel does not work correctly, and you have to manually add the one from the intel side
by bugzilla_noreply＠suse.com 07 Aug '23

07 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1214042 Dominique Leuenberger <dimstar(a)opensuse.org> changed: What |Removed |Added ---------------------------------------------------------------------------- Assignee|gnome-bugs(a)suse.de |kernel-bugs(a)opensuse.org Component|GNOME |Kernel CC| |dimstar(a)opensuse.org -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1212257] CIFS mount with DFS crashing the system
by bugzilla_noreply＠suse.com 07 Aug '23

07 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1212257 https://bugzilla.suse.com/show_bug.cgi?id=1212257#c14 --- Comment #14 from Luiz Angelo Daros de Luca <luizluca(a)tre-sc.jus.br> --- Thanks, Paulo! -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1212257] CIFS mount with DFS crashing the system
by bugzilla_noreply＠suse.com 07 Aug '23

07 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1212257 https://bugzilla.suse.com/show_bug.cgi?id=1212257#c13 Paulo Alcantara <palcantara(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Resolution|--- |FIXED --- Comment #13 from Paulo Alcantara <palcantara(a)suse.com> --- Hi Luiz, The fixes have been released in kernel-default-6.4.8-1. Please upgrade your kernel. Feel free to re-open it if you're still observing these crashes with latest tumbleweed kernel. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213365] New: kernel 6.4.2 - error messages and dropouts for usb hub and network adapter
by bugzilla_noreply＠suse.com 07 Aug '23

07 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213365 Bug ID: 1213365 Summary: kernel 6.4.2 - error messages and dropouts for usb hub and network adapter Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: x86-64 OS: openSUSE Tumbleweed Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: opensuse(a)mike.franken.de QA Contact: qa-bugs(a)suse.de Target Milestone: --- Found By: --- Blocker: --- Starting with Linux 6.4.2-1-default I get the following new error messages in my log: kernel: usb 9-1: device descriptor read/64, error -71 kernel: usb 9-1: device descriptor read/64, error -71 kernel: usb 9-1: device descriptor read/64, error -71 kernel: usb 9-1: device descriptor read/64, error -71 kernel: usb 9-1: device not accepting address 4, error -71 kernel: usb 9-1: device not accepting address 5, error -71 kernel: usb usb9-port1: unable to enumerate USB device ... kernel: r8152 10-2.3:1.0: ram code speedup mode fail kernel: r8152 10-2.3:1.0 (unnamed net_device) (uninitialized): netif_napi_add_weight() called with weight 256 Actual system version is openSUSE Tumbleweed 20230714. usb 9-1 is Bus 009 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub which is an integrated usb hub in a DELL U4924DW monitor. The netowrk card also is integrated in this monitor. All usb devices connected to that hub seem to work generally, but have some dropouts from time to time. The network card sometimes loses connection. With kernel 6.3.9 this doesn't happen. -- You are receiving this mail because: You are the assignee for the bug.

1 10

[Bug 1213153] x11vnc slow and generates mouse errors after kernel 6.3.7 - Debian reports fix for x11vnc.
by bugzilla_noreply＠suse.com 07 Aug '23

07 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213153 https://bugzilla.suse.com/show_bug.cgi?id=1213153#c6 --- Comment #6 from Takashi Iwai <tiwai(a)suse.com> --- (In reply to Stefan Dirsch from comment #5) > (In reply to Larry Rainey from comment #4) > > https://archlinux.org/packages/extra/x86_64/x11vnc/ > > Thanks. Seems they apply 3 patches on top of 0.9.16 > > https://gitlab.archlinux.org/archlinux/packaging/packages/x11vnc/-/blob/mai… > PKGBUILD > > Mabye this would also fix it for us ... https://github.com/LibVNC/x11vnc/commit/95a10ab64c2d.patch it's a NULL dereference fix, so rather a crash fix https://github.com/LibVNC/x11vnc/commit/a48b0b1cd887.patch a gcc10 compile fix https://github.com/LibVNC/x11vnc/commit/69eeb9f7baa1.patch this restricts the file permission of the shared memory So all look irrelevant from the performance issue. If any, it's in 0.9.16 version... -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1214013] Shutdown did not finish (PC was not powered off, no obvious error logged)
by bugzilla_noreply＠suse.com 07 Aug '23

07 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1214013 https://bugzilla.suse.com/show_bug.cgi?id=1214013#c1 Takashi Iwai <tiwai(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Flags| |needinfo?(Ulrich.Windl(a)rz.u | |ni-regensburg.de) CC| |tiwai(a)suse.com, | |Ulrich.Windl(a)rz.uni-regensb | |urg.de --- Comment #1 from Takashi Iwai <tiwai(a)suse.com> --- Is the issue reproducible reliably? If yes, can you verify whether the bug persists when you boot with Leap 15.4 kernel instead? -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213693] New: Black Screen during boot of kernel 6.4.x
by bugzilla_noreply＠suse.com 07 Aug '23

07 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213693 Bug ID: 1213693 Summary: Black Screen during boot of kernel 6.4.x Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: x86-64 OS: openSUSE Tumbleweed Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: grueffelokatze(a)raubtierbaendiger.de QA Contact: qa-bugs(a)suse.de Target Milestone: --- Found By: --- Blocker: --- Hello, I'm running my "MSI GS65 Stealth Thin RE8" notebook since a long time with Tumbleweed. It features a dual graphics card (intel/nvidia). When you rolled out the new kernel 6.4.x, I faced the issue, that during boot, the screen went black and never comes back. But the system itself is up and running (e.g. ssh works fine). Now, with the last update you have removed the 6.3.x kernel from the system, which was still running fine. The only thing I found which brings the graphics to work in a basic mode, is setting kernel argument "acpi=off". But this leads to a 800x600 resolution which makes me crazy. I also tried the current KDE Live CD (x86_64) version and the installation system (x86_64) of Tumbleweed. Both are ending in the same situation. They are only showing a black screen, too. Do you have any ideas where that comes from? Which kind of log files you might need for analysis? Kind regards, Gori -- You are receiving this mail because: You are the assignee for the bug.

1 16

[Bug 1213779] Big delay after Loading initial ramdisk
by bugzilla_noreply＠suse.com 07 Aug '23

07 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213779 https://bugzilla.suse.com/show_bug.cgi?id=1213779#c19 --- Comment #19 from Mark Draheim <rickscafe.casablanca(a)gmx.net> --- (In reply to Takashi Iwai from comment #17) > http://download.opensuse.org/repositories/home:/tiwai:/bsc1213779/standard/ > Please give it a try later without the boot option workaround. works for the ThinkBook IML. Installed this one http://download.opensuse.org/repositories/home:/tiwai:/bsc1213779/standard/… , removed the tpm_tis boot opt, checked that 6.4.4 was taking forever, and then again that your 6.4.8 works. Disabling TPM in Bios is also possible on this laptop but I keep that enabled for now. Thanks -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213380] Black Screen Issue on openSUSE Tumbleweed ISO after BIOS with DP-HDMI Video Output
by bugzilla_noreply＠suse.com 07 Aug '23

07 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213380 https://bugzilla.suse.com/show_bug.cgi?id=1213380#c20 --- Comment #20 from Takashi Iwai <tiwai(a)suse.com> --- Through a quick glance at logs, I didn't see anything particular. I suppose the best would be to report the issue to the upstream, gitlab.freedesktop.org, DRM/AMDGPU. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1212209] VirtualBox broken in Kernel 6.3.6-1-default
by bugzilla_noreply＠suse.com 07 Aug '23

07 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1212209 https://bugzilla.suse.com/show_bug.cgi?id=1212209#c18 --- Comment #18 from Larry Rainey <llrainey15(a)gmail.com> --- If windows start to load and the tpm 2.0 is selected and corrupt it will stop loading. remove tpm 2.0 from the settings and see if windows loads. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1212601] Cannot emerge from sleep
by bugzilla_noreply＠suse.com 07 Aug '23

07 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1212601 https://bugzilla.suse.com/show_bug.cgi?id=1212601#c11 --- Comment #11 from Takashi Iwai <tiwai(a)suse.com> --- Did alt-sysrq-c work in the normal situation? i.e. kdump itself is working? -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213431] Kernel panic on suspend
by bugzilla_noreply＠suse.com 07 Aug '23

07 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213431 https://bugzilla.suse.com/show_bug.cgi?id=1213431#c9 Takashi Iwai <tiwai(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Resolution|--- |FIXED Status|NEW |RESOLVED Flags|needinfo?(popov895(a)ukr.net) | --- Comment #9 from Takashi Iwai <tiwai(a)suse.com> --- OK, then let's close :) -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213617] kernel 6.4.x power management issues on kaby lake CPU
by bugzilla_noreply＠suse.com 07 Aug '23

07 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213617 Takashi Iwai <tiwai(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- See Also| |https://bugzilla.kernel.org | |/show_bug.cgi?id=217705 -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213778] 15.5 upgrade: keyboard and mouse do not respond after resume from suspend to RAM
by bugzilla_noreply＠suse.com 07 Aug '23

07 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213778 Takashi Iwai <tiwai(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- See Also| |https://bugzilla.kernel.org | |/show_bug.cgi?id=217752 -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213771] Touchpad randomly stops working on Lenovo IdeaPad 5 14ALC05
by bugzilla_noreply＠suse.com 07 Aug '23

07 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213771 https://bugzilla.suse.com/show_bug.cgi?id=1213771#c12 --- Comment #12 from Takashi Iwai <tiwai(a)suse.com> --- OK, then at best, please report this to the upstream. But it's a bit difficult to tackle, as we don't know exactly which component triggers the problem. But, as it's an input problem, I'd begin with the input subsystem. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213693] Black Screen during boot of kernel 6.4.x
by bugzilla_noreply＠suse.com 07 Aug '23

07 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213693 Takashi Iwai <tiwai(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- URL| |https://gitlab.freedesktop. | |org/drm/intel/-/issues/8789 -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1212874] External Monitor on USB-C Docking station AMD Graphics
by bugzilla_noreply＠suse.com 07 Aug '23

07 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1212874 https://bugzilla.suse.com/show_bug.cgi?id=1212874#c6 Takashi Iwai <tiwai(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Resolution|--- |FIXED --- Comment #6 from Takashi Iwai <tiwai(a)suse.com> --- The TW kernel will included the fix patch later in its update. I assume that the bug is fixed by that. Feel free to reopen if the problem isn't fixed even after the TW update kernel containing the supposed fix (see the rpm changelog reference). -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213779] Big delay after Loading initial ramdisk
by bugzilla_noreply＠suse.com 07 Aug '23

07 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213779 https://bugzilla.suse.com/show_bug.cgi?id=1213779#c18 --- Comment #18 from Takashi Iwai <tiwai(a)suse.com> --- Created attachment 868652 --> https://bugzilla.suse.com/attachment.cgi?id=868652&action=edit Fix patch -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1212874] External Monitor on USB-C Docking station AMD Graphics
by bugzilla_noreply＠suse.com 07 Aug '23

07 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1212874 https://bugzilla.suse.com/show_bug.cgi?id=1212874#c5 --- Comment #5 from Takashi Iwai <tiwai(a)suse.com> --- Thanks for the information. I'll queue the fix patch to TW stable git branch. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213779] Big delay after Loading initial ramdisk
by bugzilla_noreply＠suse.com 07 Aug '23

07 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213779 https://bugzilla.suse.com/show_bug.cgi?id=1213779#c17 --- Comment #17 from Takashi Iwai <tiwai(a)suse.com> --- Thanks. I'm building now the test kernel package with a fix patch (for both TP E14 and 13s-MIL). It's being built in OBS home:tiwai:bsc1213779 repo. Once after the build finishes (takes an hour or so), the package will be available at http://download.opensuse.org/repositories/home:/tiwai:/bsc1213779/standard/ Please give it a try later without the boot option workaround. Note that it's an unofficial build, hence you'd need to turn off Secure Boot. Once after confirming the patch working, I'll submit it to the upstream and merge to TW kernel. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213779] Big delay after Loading initial ramdisk
by bugzilla_noreply＠suse.com 07 Aug '23

07 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213779 https://bugzilla.suse.com/show_bug.cgi?id=1213779#c16 --- Comment #16 from Mark Draheim <rickscafe.casablanca(a)gmx.net> --- Created attachment 868649 --> https://bugzilla.suse.com/attachment.cgi?id=868649&action=edit dmidecode - Lenovo ThinkBook 13s-IML -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213380] Black Screen Issue on openSUSE Tumbleweed ISO after BIOS with DP-HDMI Video Output
by bugzilla_noreply＠suse.com 07 Aug '23

07 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213380 https://bugzilla.suse.com/show_bug.cgi?id=1213380#c19 --- Comment #19 from Samuel Conway <samcon(a)protonmail.com> --- FWIW, I updated another device (laptop) to version="20230804" release="2430.1", which also had DP-HDMI output issues. I needed to Rollback to previous snapshot (20230801) to fix. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213779] Big delay after Loading initial ramdisk
by bugzilla_noreply＠suse.com 07 Aug '23

07 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213779 https://bugzilla.suse.com/show_bug.cgi?id=1213779#c15 --- Comment #15 from Cosmin Tanczel <cosmin.tanczel(a)gmail.com> --- Comment on attachment 868648 --> https://bugzilla.suse.com/attachment.cgi?id=868648 dmidecode Adding tpm_tis.interrupts=0 boot option works for me too. Without tpm_tis.interrupts=0 boot option: Startup finished in 8.023s (firmware) + 5.172s (loader) + 2min 28.393s (kernel) + 1.690s (initrd) + 3.158s (userspace) = 2min 46.438s multi-user.target reached after 3.158s in userspace. With tpm_tis.interrupts=0 boot option: Startup finished in 6.154s (firmware) + 1min 24.869s (loader) + 1.186s (kernel) + 1.735s (initrd) + 3.843s (userspace) = 1min 37.790s graphical.target reached after 3.843s in userspace. Short version: 2min 28.393s vs 1.186s Maybe we should do what Linus suggested these days (disable TPM) -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213779] Big delay after Loading initial ramdisk
by bugzilla_noreply＠suse.com 07 Aug '23

07 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213779 https://bugzilla.suse.com/show_bug.cgi?id=1213779#c14 --- Comment #14 from Cosmin Tanczel <cosmin.tanczel(a)gmail.com> --- Created attachment 868648 --> https://bugzilla.suse.com/attachment.cgi?id=868648&action=edit dmidecode -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213779] Big delay after Loading initial ramdisk
by bugzilla_noreply＠suse.com 07 Aug '23

07 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213779 https://bugzilla.suse.com/show_bug.cgi?id=1213779#c13 Takashi Iwai <tiwai(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Flags|needinfo?(jlee(a)suse.com), |needinfo? |needinfo?(bootloader-mainta | |iners(a)suse.de) | --- Comment #13 from Takashi Iwai <tiwai(a)suse.com> --- There was a bit of improvement in 6.4.8 to cut down the stall time and proceed somehow after that. You must see some relevant error message from kernel. If tpm_tis boot option works, it's basically a BIOS firmware bug, and we can add your device to the quirk list. Please give the output of dmidecode. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213779] Big delay after Loading initial ramdisk
by bugzilla_noreply＠suse.com 07 Aug '23

07 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213779 https://bugzilla.suse.com/show_bug.cgi?id=1213779#c12 --- Comment #12 from Mark Draheim <rickscafe.casablanca(a)gmx.net> --- (In reply to Takashi Iwai from comment #11) > It might be tpm_tis issue a few other machines have hit. > Try to pass tpm_tis.interrupts=0 boot option. adding that works on my ThinkBook 13s-IML. Though Tumbleweed kernel 6.4.8 took "only" 30 secs or so without it. But with that opt the crypt pw prompt shows immediately. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1214013] Shutdown did not finish (PC was not powered off, no obvious error logged)
by bugzilla_noreply＠suse.com 07 Aug '23

07 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1214013 Chenzi Cao <chcao(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Assignee|screening-team-bugs(a)suse.de |kernel-bugs(a)opensuse.org Component|Basesystem |Kernel -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213779] Big delay after Loading initial ramdisk
by bugzilla_noreply＠suse.com 07 Aug '23

07 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213779 https://bugzilla.suse.com/show_bug.cgi?id=1213779#c11 Takashi Iwai <tiwai(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |tiwai(a)suse.com --- Comment #11 from Takashi Iwai <tiwai(a)suse.com> --- It might be tpm_tis issue a few other machines have hit. Try to pass tpm_tis.interrupts=0 boot option. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213779] Big delay after Loading initial ramdisk
by bugzilla_noreply＠suse.com 07 Aug '23

07 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213779 https://bugzilla.suse.com/show_bug.cgi?id=1213779#c10 Michael Chang <mchang(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Assignee|bootloader-maintainers@suse |kernel-bugs(a)opensuse.org |.de | Component|Basesystem |Kernel CC| |mchang(a)suse.com --- Comment #10 from Michael Chang <mchang(a)suse.com> --- Reassign to kernel component given the 'noapic' option has to be used to circumvent the delay problem. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1209727] [Build 20230324] kernel crash when loading vboxdrv
by bugzilla_noreply＠suse.com 06 Aug '23

06 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1209727 https://bugzilla.suse.com/show_bug.cgi?id=1209727#c20 --- Comment #20 from Marcus Meissner <meissner(a)suse.com> --- openSUSE-SU-2023:0213-1: An update that contains security fixes can now be installed. Category: security (important) Bug References: 1209727,1211941,1212209,1212761 CVE References: JIRA References: Sources used: openSUSE Leap 15.5 (src): virtualbox-7.0.10-lp155.2.5.1, virtualbox-kmp-7.0.10-lp155.2.5.1 -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213693] Black Screen during boot of kernel 6.4.x
by bugzilla_noreply＠suse.com 06 Aug '23

06 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213693 https://bugzilla.suse.com/show_bug.cgi?id=1213693#c23 --- Comment #23 from Michael Burge <michael.burge77(a)gmail.com> --- (In reply to Takashi Iwai from comment #21) > Thanks for confirmation. > > As the revert seems to be the only valid workaround as of now, I sent a PR > to revert it for TW stable git branch. > > Please join to the upstream gitlab issues in comment 14, report there that > the problem still persists (and the revert still works), and watch out the > upstream development. Looks like it made into TW stable as I just got `6.4.8-1-default` via `zypper dup` and it works. There has been no activity upstream. Thank you, again -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1214014] vmware vm: Black screen after login (vmwgfx segfault)
by bugzilla_noreply＠suse.com 06 Aug '23

06 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1214014 https://bugzilla.suse.com/show_bug.cgi?id=1214014#c3 Takashi Iwai <tiwai(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Resolution|--- |FIXED Flags|needinfo?(munix9@googlemail | |.com) | Status|NEW |RESOLVED --- Comment #3 from Takashi Iwai <tiwai(a)suse.com> --- Good to hear. The next regular kernel update for August should happen likely in the next week, and the fix will be included there. You can keep the kernel in OBS until the proper release. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1214014] New: vmware vm: Black screen after login (vmwgfx segfault)
by bugzilla_noreply＠suse.com 06 Aug '23

06 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1214014 Bug ID: 1214014 Summary: vmware vm: Black screen after login (vmwgfx segfault) Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.5 Hardware: VMWare OS: openSUSE Leap 15.5 Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: munix9(a)googlemail.com QA Contact: qa-bugs(a)suse.de Target Milestone: --- Found By: --- Blocker: --- sddm is displayed, but after login the screen remains black. from /var/log/messages: 2023-08-06T11:18:00.500080+02:00 localhost kernel: [ 339.776253][ T1709] vmwgfx 0000:00:0f.0: [drm] *ERROR* Could not find buffer object to map 2023-08-06T11:18:00.500096+02:00 localhost kernel: [ 339.776266][ T1709] vmwgfx 0000:00:0f.0: [drm] *ERROR* Could not find buffer object to map 2023-08-06T11:18:00.536121+02:00 localhost kernel: [ 339.813437][ T1709] BUG: kernel NULL pointer dereference, address: 00000000000000d8 2023-08-06T11:18:00.536131+02:00 localhost kernel: [ 339.813445][ T1709] #PF: supervisor read access in kernel mode 2023-08-06T11:18:00.536131+02:00 localhost kernel: [ 339.813446][ T1709] #PF: error_code(0x0000) - not-present page 2023-08-06T11:18:00.536132+02:00 localhost kernel: [ 339.813448][ T1709] PGD 0 P4D 0 2023-08-06T11:18:00.536132+02:00 localhost kernel: [ 339.813450][ T1709] Oops: 0000 [#1] PREEMPT SMP NOPTI 2023-08-06T11:18:00.536133+02:00 localhost kernel: [ 339.813452][ T1709] CPU: 0 PID: 1709 Comm: X Tainted: G W X N 5.14.21-150500.55.12-default #1 SLE15-SP5 2bfb97b4b0dfdba78e4c683cc237d68301ec63cf 2023-08-06T11:18:00.536139+02:00 localhost kernel: [ 339.813456][ T1709] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 2023-08-06T11:18:00.536140+02:00 localhost kernel: [ 339.813458][ T1709] RIP: 0010:vmw_cmd_dma+0x5e/0x150 [vmwgfx] 2023-08-06T11:18:00.536140+02:00 localhost kernel: [ 339.813469][ T1709] Code: f5 83 7d f4 0c 0f 85 ab 00 00 00 48 89 d3 48 8d 54 24 08 49 89 fd 4c 89 e7 e8 8e fe ff ff 85 c0 75 75 48 8b 44 24 08 8b 53 0c <48> 8b 80 d8 00 00 00 39 c2 0f 87 95 00 00 00 29 d0 39 45 f8 0f 87 2023-08-06T11:18:00.536140+02:00 localhost kernel: [ 339.813471][ T1709] RSP: 0018:ffffb28c83c13ad8 EFLAGS: 00010246 2023-08-06T11:18:00.536141+02:00 localhost kernel: [ 339.813473][ T1709] RAX: 0000000000000000 RBX: ffff9180abe10040 RCX: 0000000000000000 2023-08-06T11:18:00.536141+02:00 localhost kernel: [ 339.813475][ T1709] RDX: 0000000000000000 RSI: ffffffffc0741490 RDI: 0000000000000002 2023-08-06T11:18:00.536141+02:00 localhost kernel: [ 339.813476][ T1709] RBP: ffff9180abe100b8 R08: ffff918093a66060 R09: ffff918093a66000 2023-08-06T11:18:00.536141+02:00 localhost kernel: [ 339.813478][ T1709] R10: 0000000000000000 R11: ffff918099561048 R12: ffff91808a5511d0 2023-08-06T11:18:00.536142+02:00 localhost kernel: [ 339.813479][ T1709] R13: ffff91808a550000 R14: ffff9180abe10040 R15: 0000000000000078 2023-08-06T11:18:00.536142+02:00 localhost kernel: [ 339.813480][ T1709] FS: 00007f1595515980(0000) GS:ffff9181b5e00000(0000) knlGS:0000000000000000 2023-08-06T11:18:00.536142+02:00 localhost kernel: [ 339.813482][ T1709] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 2023-08-06T11:18:00.536143+02:00 localhost kernel: [ 339.813484][ T1709] CR2: 00000000000000d8 CR3: 0000000119520003 CR4: 0000000000770ef0 2023-08-06T11:18:00.536143+02:00 localhost kernel: [ 339.813490][ T1709] PKRU: 55555554 2023-08-06T11:18:00.536143+02:00 localhost kernel: [ 339.813491][ T1709] Call Trace: 2023-08-06T11:18:00.536143+02:00 localhost kernel: [ 339.813493][ T1709] <TASK> 2023-08-06T11:18:00.536144+02:00 localhost kernel: [ 339.813495][ T1709] ? vmw_cmdbuf_alloc+0xb0/0x1f0 [vmwgfx 3e2fb2cc1982a32c5b86d59c6f74d3ae69ed78fe] 2023-08-06T11:18:00.536144+02:00 localhost kernel: [ 339.813506][ T1709] vmw_execbuf_process+0x4e5/0x1030 [vmwgfx 3e2fb2cc1982a32c5b86d59c6f74d3ae69ed78fe] 2023-08-06T11:18:00.536144+02:00 localhost kernel: [ 339.813513][ T1709] vmw_execbuf_ioctl+0xf8/0x170 [vmwgfx 3e2fb2cc1982a32c5b86d59c6f74d3ae69ed78fe] 2023-08-06T11:18:00.536145+02:00 localhost kernel: [ 339.813520][ T1709] ? vmw_execbuf_release_pinned_bo+0x40/0x40 [vmwgfx 3e2fb2cc1982a32c5b86d59c6f74d3ae69ed78fe] 2023-08-06T11:18:00.536145+02:00 localhost kernel: [ 339.813526][ T1709] drm_ioctl_kernel+0xb8/0x150 [drm 22c6c61d06b3feecc443ea2950bb71bb2802bd66] 2023-08-06T11:18:00.536145+02:00 localhost kernel: [ 339.813545][ T1709] drm_ioctl+0x35a/0x400 [drm 22c6c61d06b3feecc443ea2950bb71bb2802bd66] 2023-08-06T11:18:00.536146+02:00 localhost kernel: [ 339.813571][ T1709] ? vmw_execbuf_release_pinned_bo+0x40/0x40 [vmwgfx 3e2fb2cc1982a32c5b86d59c6f74d3ae69ed78fe] 2023-08-06T11:18:00.536146+02:00 localhost kernel: [ 339.813577][ T1709] ? vmw_fence_fifo_up+0x30/0x30 [vmwgfx 3e2fb2cc1982a32c5b86d59c6f74d3ae69ed78fe] 2023-08-06T11:18:00.536146+02:00 localhost kernel: [ 339.813585][ T1709] ? drm_ioctl_kernel+0x150/0x150 [drm 22c6c61d06b3feecc443ea2950bb71bb2802bd66] 2023-08-06T11:18:00.536147+02:00 localhost kernel: [ 339.813597][ T1709] vmw_generic_ioctl+0x77/0x120 [vmwgfx 3e2fb2cc1982a32c5b86d59c6f74d3ae69ed78fe] 2023-08-06T11:18:00.536147+02:00 localhost kernel: [ 339.813604][ T1709] __x64_sys_ioctl+0x8f/0xd0 2023-08-06T11:18:00.536147+02:00 localhost kernel: [ 339.813608][ T1709] ? vmw_generic_ioctl+0x77/0x120 [vmwgfx 3e2fb2cc1982a32c5b86d59c6f74d3ae69ed78fe] 2023-08-06T11:18:00.536148+02:00 localhost kernel: [ 339.813614][ T1709] do_syscall_64+0x58/0x80 2023-08-06T11:18:00.536148+02:00 localhost kernel: [ 339.813618][ T1709] ? exit_to_user_mode_prepare+0x1de/0x240 2023-08-06T11:18:00.536148+02:00 localhost kernel: [ 339.813621][ T1709] ? syscall_exit_to_user_mode+0x18/0x40 2023-08-06T11:18:00.536148+02:00 localhost kernel: [ 339.813623][ T1709] ? do_syscall_64+0x67/0x80 2023-08-06T11:18:00.536149+02:00 localhost kernel: [ 339.813625][ T1709] ? do_syscall_64+0x67/0x80 2023-08-06T11:18:00.536149+02:00 localhost kernel: [ 339.813626][ T1709] ? exit_to_user_mode_prepare+0x1ce/0x240 2023-08-06T11:18:00.536149+02:00 localhost kernel: [ 339.813628][ T1709] ? exit_to_user_mode_prepare+0x1ce/0x240 2023-08-06T11:18:00.536150+02:00 localhost kernel: [ 339.813630][ T1709] ? syscall_exit_to_user_mode+0x18/0x40 2023-08-06T11:18:00.536150+02:00 localhost kernel: [ 339.813632][ T1709] ? do_syscall_64+0x67/0x80 2023-08-06T11:18:00.536150+02:00 localhost kernel: [ 339.813633][ T1709] ? exit_to_user_mode_prepare+0x1ce/0x240 2023-08-06T11:18:00.536151+02:00 localhost kernel: [ 339.813635][ T1709] ? exit_to_user_mode_prepare+0x1ce/0x240 2023-08-06T11:18:00.536151+02:00 localhost kernel: [ 339.813637][ T1709] entry_SYSCALL_64_after_hwframe+0x61/0xcb 2023-08-06T11:18:00.536151+02:00 localhost kernel: [ 339.813639][ T1709] RIP: 0033:0x7f1596a76437 2023-08-06T11:18:00.536151+02:00 localhost kernel: [ 339.813641][ T1709] Code: 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 66 90 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 29 da 0d 00 f7 d8 64 89 01 48 2023-08-06T11:18:00.536152+02:00 localhost kernel: [ 339.813644][ T1709] RSP: 002b:00007fff5ee88be8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 2023-08-06T11:18:00.536152+02:00 localhost kernel: [ 339.813645][ T1709] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f1596a76437 2023-08-06T11:18:00.536152+02:00 localhost kernel: [ 339.813647][ T1709] RDX: 00007fff5ee88c80 RSI: 000000004020644c RDI: 000000000000000e 2023-08-06T11:18:00.536153+02:00 localhost kernel: [ 339.813648][ T1709] RBP: 00007fff5ee88c80 R08: 0000560746ad9580 R09: 0000000000000078 2023-08-06T11:18:00.536153+02:00 localhost kernel: [ 339.813649][ T1709] R10: 0000000000000320 R11: 0000000000000246 R12: 000000004020644c 2023-08-06T11:18:00.536153+02:00 localhost kernel: [ 339.813651][ T1709] R13: 000000000000000e R14: 00005607476ec610 R15: 00005607476ec5b0 2023-08-06T11:18:00.536154+02:00 localhost kernel: [ 339.813653][ T1709] </TASK> 2023-08-06T11:18:00.536154+02:00 localhost kernel: [ 339.813653][ T1709] Modules linked in: snd_seq_midi snd_seq_midi_event snd_seq af_packet rfkill qrtr(N) ns(N) vsock_loopback vmw_vsock_virtio_transport_common vmw_vsock_vmci_transport vsock intel_rapl_msr vmw_balloon intel_rapl_common intel_pmc_core snd_ens1371 snd_ac97_codec ac97_bus snd_rawmidi snd_seq_device joydev pcspkr snd_pcm e1000 snd_timer snd vmw_vmci soundcore mptctl i2c_piix4 button ac fuse efi_pstore(N) configfs ip_tables x_tables ext4 crc16 mbcache jbd2 hid_generic usbhid sd_mod t10_pi crc64_rocksoft_generic crc64_rocksoft crc64 crc32_pclmul crc32c_intel ghash_clmulni_intel vmwgfx sr_mod aesni_intel cdrom drm_ttm_helper ttm ata_generic crypto_simd cryptd drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm uhci_hcd serio_raw ehci_pci ehci_hcd ata_piix ahci libahci usbcore libata mptspi scsi_transport_spi mptscsih mptbase sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_mod msr 2023-08-06T11:18:00.536154+02:00 localhost kernel: [ 339.813705][ T1709] Supported: No, Unsupported modules are loaded 2023-08-06T11:18:00.536155+02:00 localhost kernel: [ 339.813707][ T1709] CR2: 00000000000000d8 2023-08-06T11:18:00.536155+02:00 localhost kernel: [ 339.813709][ T1709] ---[ end trace 0dcfdf9baad2a78f ]--- 2023-08-06T11:18:00.536155+02:00 localhost kernel: [ 339.813710][ T1709] RIP: 0010:vmw_cmd_dma+0x5e/0x150 [vmwgfx] 2023-08-06T11:18:00.536156+02:00 localhost kernel: [ 339.813716][ T1709] Code: f5 83 7d f4 0c 0f 85 ab 00 00 00 48 89 d3 48 8d 54 24 08 49 89 fd 4c 89 e7 e8 8e fe ff ff 85 c0 75 75 48 8b 44 24 08 8b 53 0c <48> 8b 80 d8 00 00 00 39 c2 0f 87 95 00 00 00 29 d0 39 45 f8 0f 87 2023-08-06T11:18:00.536156+02:00 localhost kernel: [ 339.813718][ T1709] RSP: 0018:ffffb28c83c13ad8 EFLAGS: 00010246 2023-08-06T11:18:00.536156+02:00 localhost kernel: [ 339.813719][ T1709] RAX: 0000000000000000 RBX: ffff9180abe10040 RCX: 0000000000000000 2023-08-06T11:18:00.536157+02:00 localhost kernel: [ 339.813723][ T1709] RDX: 0000000000000000 RSI: ffffffffc0741490 RDI: 0000000000000002 2023-08-06T11:18:00.536157+02:00 localhost kernel: [ 339.813724][ T1709] RBP: ffff9180abe100b8 R08: ffff918093a66060 R09: ffff918093a66000 2023-08-06T11:18:00.536157+02:00 localhost kernel: [ 339.813726][ T1709] R10: 0000000000000000 R11: ffff918099561048 R12: ffff91808a5511d0 2023-08-06T11:18:00.536157+02:00 localhost kernel: [ 339.813727][ T1709] R13: ffff91808a550000 R14: ffff9180abe10040 R15: 0000000000000078 2023-08-06T11:18:00.536158+02:00 localhost kernel: [ 339.813729][ T1709] FS: 00007f1595515980(0000) GS:ffff9181b5e00000(0000) knlGS:0000000000000000 2023-08-06T11:18:00.536158+02:00 localhost kernel: [ 339.813731][ T1709] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 2023-08-06T11:18:00.536158+02:00 localhost kernel: [ 339.813732][ T1709] CR2: 00000000000000d8 CR3: 0000000119520003 CR4: 0000000000770ef0 2023-08-06T11:18:00.536159+02:00 localhost kernel: [ 339.813737][ T1709] PKRU: 55555554 from /var/log/Xorg.0.log: [ 339.912] (EE) [ 339.912] (EE) Backtrace: [ 339.912] (EE) 0: /usr/bin/X (xorg_backtrace+0x65) [0x560744bdb835] [ 339.912] (EE) 1: /usr/bin/X (0x560744a17000+0x1c8509) [0x560744bdf509] [ 339.912] (EE) 2: /lib64/libpthread.so.0 (0x7f1596b60000+0x16910) [0x7f1596b76910] [ 339.912] (EE) 3: /lib64/libc.so.6 (0x7f1596969000+0x181f37) [0x7f1596aeaf37] [ 339.912] (EE) 4: /usr/bin/X (fbBlt+0xfd8) [0x560744ba8818] [ 339.912] (EE) 5: /usr/bin/X (fbCopyWindowProc+0x12a) [0x560744bb1efa] [ 339.912] (EE) 6: /usr/bin/X (miCopyRegion+0x8c) [0x560744bbd8cc] [ 339.912] (EE) 7: /usr/bin/X (fbCopyWindow+0xf3) [0x560744bb2263] [ 339.912] (EE) 8: /usr/lib64/xorg/modules/drivers/vmware_drv.so (0x7f1594b59000+0x1fa0d) [0x7f1594b78a0d] [ 339.912] (EE) 9: /usr/bin/X (0x560744a17000+0x13a8db) [0x560744b518db] [ 339.912] (EE) 10: /usr/bin/X (0x560744a17000+0x1b5613) [0x560744bcc613] [ 339.912] (EE) 11: /usr/bin/X (0x560744a17000+0xe8a17) [0x560744affa17] [ 339.912] (EE) 12: /usr/bin/X (miResizeWindow+0x7cd) [0x560744bd4c5d] [ 339.912] (EE) 13: /usr/bin/X (0x560744a17000+0xe86ca) [0x560744aff6ca] [ 339.912] (EE) 14: /usr/bin/X (ConfigureWindow+0xa41) [0x560744aa3531] [ 339.912] (EE) 15: /usr/bin/X (0x560744a17000+0x5a179) [0x560744a71179] [ 339.912] (EE) 16: /usr/bin/X (0x560744a17000+0x5ff1f) [0x560744a76f1f] [ 339.912] (EE) 17: /usr/bin/X (0x560744a17000+0x63f24) [0x560744a7af24] [ 339.912] (EE) 18: /lib64/libc.so.6 (__libc_start_main+0xef) [0x7f159699e24d] [ 339.912] (EE) 19: /usr/bin/X (_start+0x2a) [0x560744a647ca] [ 339.912] (EE) [ 339.912] (EE) Segmentation fault at address 0x0 [ 339.912] (EE) Fatal server error: [ 339.912] (EE) Caught signal 11 (Segmentation fault). Server aborting [ 339.912] (EE) see also https://github.com/vmware/open-vm-tools/issues/667 -- You are receiving this mail because: You are the assignee for the bug.

1 1

[Bug 1213972] system intermittently fails to detect Bluetooth LE devices
by bugzilla_noreply＠suse.com 06 Aug '23

06 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213972 https://bugzilla.suse.com/show_bug.cgi?id=1213972#c11 Takashi Iwai <tiwai(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Flags|needinfo?(kernel-bugs@opens | |use.org) | --- Comment #11 from Takashi Iwai <tiwai(a)suse.com> --- You can find some upstream document like: https://docs.kernel.org/admin-guide/quickly-build-trimmed-linux.html The installkernel program is included in kernel-install-tools package. -- You are receiving this mail because: You are on the CC list for the bug. You are the assignee for the bug.

1 0

[Bug 1214014] vmware vm: Black screen after login (vmwgfx segfault)
by bugzilla_noreply＠suse.com 06 Aug '23

06 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1214014 https://bugzilla.suse.com/show_bug.cgi?id=1214014#c1 Takashi Iwai <tiwai(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Flags| |needinfo?(munix9@googlemail | |.com) CC| |munix9(a)googlemail.com, | |tiwai(a)suse.com --- Comment #1 from Takashi Iwai <tiwai(a)suse.com> --- Could you check the latest kernel in OBS Kernel:SLE15-SP5 repo? http://download.opensuse.org/repositories/Kernel:/SLE15-SP5/pool/ -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1214004] Rebuilding MD-RAID brings system almost to a halt
by bugzilla_noreply＠suse.com 06 Aug '23

06 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1214004 Takashi Iwai <tiwai(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Assignee|kernel-bugs(a)opensuse.org |hare(a)suse.com CC| |tiwai(a)suse.com -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1214005] Shouldn't rtl8812au-kmp-default use a signed module?
by bugzilla_noreply＠suse.com 06 Aug '23

06 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1214005 https://bugzilla.suse.com/show_bug.cgi?id=1214005#c2 Takashi Iwai <tiwai(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |tiwai(a)suse.com Status|NEW |RESOLVED Resolution|--- |FEATURE --- Comment #2 from Takashi Iwai <tiwai(a)suse.com> --- If it's a package from OBS hardware project, it's no part of official release, hence it's never signed with the official key. You'd have to import the OBS project's cert file manually and deploy for MOK by yourself. For other issue, please open another report. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213972] system intermittently fails to detect Bluetooth LE devices
by bugzilla_noreply＠suse.com 05 Aug '23

05 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213972 https://bugzilla.suse.com/show_bug.cgi?id=1213972#c9 Takashi Iwai <tiwai(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Flags|needinfo?(kernel-bugs@opens | |use.org) | --- Comment #9 from Takashi Iwai <tiwai(a)suse.com> --- Creating an rpm isn't so trivial, so I'd rather recommend to compile and install manually the upstream linux git repo for bisection. -- You are receiving this mail because: You are on the CC list for the bug. You are the assignee for the bug.

1 0

[Bug 1213948] nouveau: Resolution limited to 1024x768 after update Leap 15.4 -> Leap 15.5
by bugzilla_noreply＠suse.com 05 Aug '23

05 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213948 https://bugzilla.suse.com/show_bug.cgi?id=1213948#c11 Takashi Iwai <tiwai(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Resolution|--- |FEATURE Flags|needinfo?(hans-peter.dillim | |ann(a)gmx.de) | Status|NEW |RESOLVED --- Comment #11 from Takashi Iwai <tiwai(a)suse.com> --- Good to hear. Let's close. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213948] nouveau: Resolution limited to 1024x768 after update Leap 15.4 -> Leap 15.5
by bugzilla_noreply＠suse.com 05 Aug '23

05 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213948 https://bugzilla.suse.com/show_bug.cgi?id=1213948#c10 --- Comment #10 from Hans-Peter Dillimann <hans-peter.dillimann(a)gmx.de> --- The kernel boot parameter 'nouveau.force_probe=1 works. Thanks for help. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1214004] New: Rebuilding MD-RAID brings system almost to a halt
by bugzilla_noreply＠suse.com 04 Aug '23

04 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1214004 Bug ID: 1214004 Summary: Rebuilding MD-RAID brings system almost to a halt Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.5 Hardware: x86-64 OS: Other Status: NEW Severity: Major Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: Ulrich.Windl(a)rz.uni-regensburg.de QA Contact: qa-bugs(a)suse.de Target Milestone: --- Found By: --- Blocker: --- (This problem is not new, but as it's still there, I thought it's time to report it) My system has one Intel on-board SATA RAID controller: 09: PCI 1f.2: 0104 RAID bus controller [Created at pci.386] Unique ID: w7Y8.IzwgmJk+U9F SysFS ID: /devices/pci0000:00/0000:00:1f.2 SysFS BusID: 0000:00:1f.2 Hardware Class: storage Model: "Intel SATA Controller [RAID mode]" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2822 "SATA Controller [RAID mode]" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8534 Revision: 0x05 Driver: "ahci" Driver Modules: "ahci" I/O Ports: 0xf070-0xf077 (rw) I/O Ports: 0xf060-0xf063 (rw) I/O Ports: 0xf050-0xf057 (rw) I/O Ports: 0xf040-0xf043 (rw) I/O Ports: 0xf020-0xf03f (rw) Memory Range: 0xf7f16000-0xf7f167ff (rw,non-prefetchable) IRQ: 29 (744001 events) Module Alias: "pci:v00008086d00002822sv00001043sd00008534bc01sc04i00" Driver Info #0: Driver Status: ahci is active Driver Activation Cmd: "modprobe ahci" Config Status: cfg=no, avail=yes, need=no, active=unknown The system has four disks (and a BluRay burner), two pairs of RAID1: Model: "WDC WD20EZRZ-00Z" Model: "WDC WD20EZRZ-00Z" Model: "HGST HTS541010A9" Model: "HGST HTS541010A9" Linux is on one RAID, other RAID has some Windows data (unused in Linux). When the system hung on reboot after upgrading from Leap 15.4 to 15.5, I pressed the reset button after having waited a long time. Unfortunately during boot that caused the OS RAID to be "unclean", forcing a rebuild: Aug 05 00:23:22 pc kernel: md/raid1:md126: not clean -- starting background reconstruction Aug 05 00:23:22 pc kernel: md/raid1:md126: active with 2 out of 2 mirrors md126 : active raid1 sda[1] sdb[0] 1953497088 blocks super external:/md127/0 [2/2] [UU] [==>..................] resync = 12.4% (243003648/1953497088) finish=236.9min speed=120296K/sec md127 : inactive sdb[1](S) sda[0](S) 10402 blocks super external:imsm When the MD-RAID is rebuilding some commands take almost forever, also giving nonsense results. For example: > rpm -ql cpupower-5.14 warning: waiting for shared lock on /usr/lib/sysimage/rpm/Packages error: cannot get shared lock on /usr/lib/sysimage/rpm/Packages error: cannot open Packages index using db4 - Die Operation ist nicht erlaubt (1) error: cannot open Packages database in /usr/lib/sysimage/rpm warning: waiting for shared lock on /usr/lib/sysimage/rpm/Packages error: cannot get shared lock on /usr/lib/sysimage/rpm/Packages error: cannot open Packages index using db4 - Die Operation ist nicht erlaubt (1) error: cannot open Packages database in /usr/lib/sysimage/rpm package cpupower-5.14 is not installed > rpm -ql cpupower-5.14 warning: waiting for shared lock on /usr/lib/sysimage/rpm/Packages error: cannot get shared lock on /usr/lib/sysimage/rpm/Packages error: cannot open Packages index using db4 - Die Operation ist nicht erlaubt (1) error: cannot open Packages database in /usr/lib/sysimage/rpm warning: waiting for shared lock on /usr/lib/sysimage/rpm/Packages /usr/bin/cpupower /usr/bin/intel-speed-select /usr/bin/turbostat ... (First it said the package is not installed, then it obviously was) Of course that is a bug in RPM, most likely, too. Anyway I think the default rebuild speed should reserve a bigger amount of bandwidth for application use (i.e.: no for rebuilding) I improved the situation limiting the rebuild speed to 50MB/s or so (see also https://superuser.com/a/625724/964771): sudo sh -c "echo 50000 > /proc/sys/dev/raid/speed_limit_max" -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213972] system intermittently fails to detect Bluetooth LE devices
by bugzilla_noreply＠suse.com 04 Aug '23

04 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213972 https://bugzilla.suse.com/show_bug.cgi?id=1213972#c7 --- Comment #7 from dziobian <brunopitrus(a)hotmail.com> --- https://marc.info/?l=linux-bluetooth&m=169117524414968&w=2 -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213805] OpenSUSE installation support for SMARC RZ/G2L platform
by bugzilla_noreply＠suse.com 04 Aug '23

04 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213805 https://bugzilla.suse.com/show_bug.cgi?id=1213805#c25 --- Comment #25 from John Vincent <john.vincent.xa(a)bp.renesas.com> --- Thanks Ivan. >>I don't know what you mean by "(x/6) not present". NET iso contain >> minimal set of application, I was referring the full installer iso image for testing. Dear OpenSUSE support team, Please update when this fix is available (adding reset-rzg2l-usbphy-ctrl.ko into the full installer ISO image). Thanks. Best Regards John -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213972] system intermittently fails to detect Bluetooth LE devices
by bugzilla_noreply＠suse.com 04 Aug '23

04 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213972 https://bugzilla.suse.com/show_bug.cgi?id=1213972#c6 --- Comment #6 from Takashi Iwai <tiwai(a)suse.com> --- Thanks, so very likely a bug introduced in 6.4 bump. Care to report it to the upstream? The best would be the corresponding devel ML, but you can try bugzilla.kernel.org, too. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213972] system intermittently fails to detect Bluetooth LE devices
by bugzilla_noreply＠suse.com 04 Aug '23

04 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213972 https://bugzilla.suse.com/show_bug.cgi?id=1213972#c5 --- Comment #5 from dziobian <brunopitrus(a)hotmail.com> --- 6.4.2 is also broken. It's the first broken kernel (the previous one was 6.3.9 which works ok) -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213948] nouveau: Resolution limited to 1024x768 after update Leap 15.4 -> Leap 15.5
by bugzilla_noreply＠suse.com 04 Aug '23

04 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213948 https://bugzilla.suse.com/show_bug.cgi?id=1213948#c9 --- Comment #9 from Takashi Iwai <tiwai(a)suse.com> --- (In reply to Hans-Peter Dillimann from comment #7) > Output con dmesg: > [ 3.513907] nouveau 0000:2d:00.0: Probe of device 1f82 skipped due to > experimental state of this driver. > You can enable nouveau driver via force_probe=1 option > (kernel boot parameter 'nouveau.force_probe=1') > However we recommend the usage of nVidia's openGPU driver > meanwhile. See our Release Notes for more details. Please read this message. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213972] system intermittently fails to detect Bluetooth LE devices
by bugzilla_noreply＠suse.com 04 Aug '23

04 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213972 https://bugzilla.suse.com/show_bug.cgi?id=1213972#c4 --- Comment #4 from dziobian <brunopitrus(a)hotmail.com> --- kernel-default-6.4.3-1.1 is broken -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213948] nouveau: Resolution limited to 1024x768 after update Leap 15.4 -> Leap 15.5
by bugzilla_noreply＠suse.com 04 Aug '23

04 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213948 https://bugzilla.suse.com/show_bug.cgi?id=1213948#c8 --- Comment #8 from Hans-Peter Dillimann <hans-peter.dillimann(a)gmx.de> --- 2.teil: [ 5.120957] r8169 0000:27:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] [ 5.142328] Adding 2097148k swap on /dev/sdd2. Priority:-2 extents:1 across:2097148k SSFS [ 5.233913] systemd-journald[698]: Received client request to flush runtime journal. [ 5.261798] audit: type=1400 audit(1691155155.180:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lessopen.sh" pid=1043 comm="apparmor_parser" [ 5.262386] audit: type=1400 audit(1691155155.180:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/updatedb" pid=1045 comm="apparmor_parser" [ 5.262530] audit: type=1400 audit(1691155155.180:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="klogd" pid=1040 comm="apparmor_parser" [ 5.262572] audit: type=1400 audit(1691155155.180:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="dovecot-anvil" pid=1046 comm="apparmor_parser" [ 5.263214] audit: type=1400 audit(1691155155.184:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1032 comm="apparmor_parser" [ 5.263634] audit: type=1400 audit(1691155155.184:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1033 comm="apparmor_parser" [ 5.263637] audit: type=1400 audit(1691155155.184:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1033 comm="apparmor_parser" [ 5.264480] audit: type=1400 audit(1691155155.184:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/locate" pid=1044 comm="apparmor_parser" [ 5.264614] audit: type=1400 audit(1691155155.184:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ping" pid=1031 comm="apparmor_parser" [ 5.325851] SGI XFS with ACLs, security attributes, quota, no debug enabled [ 5.330305] pstore: Efi pstore disabled, enforce via pstore.backend=efi [ 5.330306] pstore: On a broken BIOS, this can severely harm your system [ 5.330307] pstore: Only enable efi based pstore when you know what you are doing [ 5.330332] input: PC Speaker as /devices/platform/pcspkr/input/input14 [ 5.330363] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 5.330367] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection [ 5.330421] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 5.331891] XFS (sdb1): Mounting V5 Filesystem [ 5.332399] XFS (sda1): Mounting V5 Filesystem [ 5.333157] XFS (sdc1): Mounting V5 Filesystem [ 5.346492] mc: Linux media interface: v0.10 [ 5.348998] kvm: Nested Virtualization enabled [ 5.349001] SVM: kvm: Nested Paging enabled [ 5.349003] SEV supported: 509 ASIDs [ 5.349032] SVM: Virtual VMLOAD VMSAVE supported [ 5.349032] SVM: Virtual GIF supported [ 5.349220] XFS (sdc1): Ending clean mount [ 5.350304] xfs filesystem being mounted at /home supports timestamps until 2038 (0x7fffffff) [ 5.354823] MCE: In-kernel MCE decoding enabled. [ 5.508016] intel_rapl_common: Found RAPL domain package [ 5.508019] intel_rapl_common: Found RAPL domain core [ 5.512072] snd_hda_intel 0000:2d:00.1: Disabling MSI [ 5.512080] snd_hda_intel 0000:2d:00.1: Handle vga_switcheroo audio client [ 5.512105] snd_hda_intel 0000:2f:00.4: enabling device (0000 -> 0002) [ 5.527449] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:2d:00.1/sound/card0/input15 [ 5.527489] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:2d:00.1/sound/card0/input16 [ 5.527521] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:2d:00.1/sound/card0/input17 [ 5.527552] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:2d:00.1/sound/card0/input18 [ 5.530577] snd_hda_codec_realtek hdaudioC2D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line [ 5.530581] snd_hda_codec_realtek hdaudioC2D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 5.530582] snd_hda_codec_realtek hdaudioC2D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 5.530584] snd_hda_codec_realtek hdaudioC2D0: mono: mono_out=0x0 [ 5.530584] snd_hda_codec_realtek hdaudioC2D0: dig-out=0x1e/0x0 [ 5.530585] snd_hda_codec_realtek hdaudioC2D0: inputs: [ 5.530586] snd_hda_codec_realtek hdaudioC2D0: Front Mic=0x19 [ 5.530587] snd_hda_codec_realtek hdaudioC2D0: Rear Mic=0x18 [ 5.530588] snd_hda_codec_realtek hdaudioC2D0: Line=0x1a [ 5.591156] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:2f:00.4/sound/card2/input19 [ 5.591194] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:2f:00.4/sound/card2/input20 [ 5.591227] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:2f:00.4/sound/card2/input21 [ 5.591258] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:2f:00.4/sound/card2/input22 [ 5.591290] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:2f:00.4/sound/card2/input23 [ 5.591325] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:2f:00.4/sound/card2/input24 [ 5.591359] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:2f:00.4/sound/card2/input25 [ 5.681483] usbcore: registered new interface driver snd-usb-audio [ 5.797986] XFS (sda1): Ending clean mount [ 5.799589] xfs filesystem being mounted at /Daten supports timestamps until 2038 (0x7fffffff) [ 5.809541] XFS (sdb1): Ending clean mount [ 5.810854] xfs filesystem being mounted at /sicher supports timestamps until 2038 (0x7fffffff) [ 6.031055] vboxdrv: loading out-of-tree module taints kernel. [ 6.031218] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 6.036150] vboxdrv: Found 16 processor cores/threads [ 6.054843] vboxdrv: TSC mode is Invariant, tentative frequency 4249999284 Hz [ 6.054844] vboxdrv: Successfully loaded version 7.0.8 r156879 (interface 0x00330004) [ 6.128928] NET: Registered PF_QIPCRTR protocol family [ 6.130768] Generic FE-GE Realtek PHY r8169-0-2700:00: attached PHY driver (mii_bus:phy_addr=r8169-0-2700:00, irq=MAC) [ 6.295989] VBoxNetFlt: Successfully started. [ 6.297848] VBoxNetAdp: Successfully started. [ 6.339376] r8169 0000:27:00.0 eth0: Link is Down [ 9.245250] r8169 0000:27:00.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 9.245263] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 9.267071] NET: Registered PF_PACKET protocol family -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213948] nouveau: Resolution limited to 1024x768 after update Leap 15.4 -> Leap 15.5
by bugzilla_noreply＠suse.com 04 Aug '23

04 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213948 https://bugzilla.suse.com/show_bug.cgi?id=1213948#c7 --- Comment #7 from Hans-Peter Dillimann <hans-peter.dillimann(a)gmx.de> --- Output con dmesg: [ 0.099823] pid_max: default: 32768 minimum: 301 [ 0.101944] LSM: Security Framework initializing [ 0.101963] AppArmor: AppArmor initialized [ 0.102043] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.102111] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.211834] smpboot: CPU0: AMD Ryzen 7 3800X 8-Core Processor (family: 0x17, model: 0x71, stepping: 0x0) [ 0.211940] Performance Events: Fam17h+ core perfctr, AMD PMU driver. [ 0.211943] ... version: 0 [ 0.211944] ... bit width: 48 [ 0.211944] ... generic registers: 6 [ 0.211945] ... value mask: 0000ffffffffffff [ 0.211945] ... max period: 00007fffffffffff [ 0.211946] ... fixed-purpose events: 0 [ 0.211946] ... event mask: 000000000000003f [ 0.211978] signal: max sigframe size: 1776 [ 0.211988] rcu: Hierarchical SRCU implementation. [ 0.212276] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.212436] smp: Bringing up secondary CPUs ... [ 0.212493] x86: Booting SMP configuration: [ 0.212493] .... node #0, CPUs: #1 [ 0.004258] __common_interrupt: 1.55 No irq handler for vector [ 0.214747] #2 [ 0.004258] __common_interrupt: 2.55 No irq handler for vector [ 0.214802] #3 [ 0.004258] __common_interrupt: 3.55 No irq handler for vector [ 0.216911] #4 [ 0.004258] __common_interrupt: 4.55 No irq handler for vector [ 0.218802] #5 [ 0.004258] __common_interrupt: 5.55 No irq handler for vector [ 0.222803] #6 [ 0.004258] __common_interrupt: 6.55 No irq handler for vector [ 0.224939] #7 [ 0.004258] __common_interrupt: 7.55 No irq handler for vector [ 0.226800] #8 [ 0.004258] __common_interrupt: 8.55 No irq handler for vector [ 0.228974] Spectre V2 : Update user space SMT mitigation: STIBP always-on [ 0.228974] #9 [ 0.004258] __common_interrupt: 9.55 No irq handler for vector [ 0.230808] #10 [ 0.004258] __common_interrupt: 10.55 No irq handler for vector [ 0.232919] #11 #12 #13 #14 #15 [ 0.244939] smp: Brought up 1 node, 16 CPUs [ 0.244939] smpboot: Max logical packages: 2 [ 0.244939] smpboot: Total of 16 processors activated (135999.58 BogoMIPS) [ 0.318383] node 0 deferred pages initialised in 72ms [ 0.320064] devtmpfs: initialized [ 0.320064] x86/mm: Memory block size: 2048MB [ 0.320064] ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20ffff] (65536 bytes) [ 0.320064] ACPI: PM: Registering ACPI NVS region [mem 0xcb715000-0xcce13fff] (24113152 bytes) [ 0.320064] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.320064] futex hash table entries: 8192 (order: 7, 524288 bytes, linear) [ 0.320064] pinctrl core: initialized pinctrl subsystem [ 0.320064] PM: RTC time: 13:19:10, date: 2023-08-04 [ 0.320064] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.320064] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.320064] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.320064] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.320064] audit: initializing netlink subsys (disabled) [ 0.320064] audit: type=2000 audit(1691155150.244:1): state=initialized audit_enabled=0 res=1 [ 0.320064] thermal_sys: Registered thermal governor 'fair_share' [ 0.320064] thermal_sys: Registered thermal governor 'bang_bang' [ 0.320064] thermal_sys: Registered thermal governor 'step_wise' [ 0.320064] thermal_sys: Registered thermal governor 'user_space' [ 0.320064] cpuidle: using governor ladder [ 0.320064] cpuidle: using governor menu [ 0.320064] Detected 1 PCC Subspaces [ 0.320064] Registering PCC driver as Mailbox controller [ 0.320064] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.320064] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 0.320064] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820 [ 0.320064] PCI: Using configuration type 1 for base access [ 0.320064] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.320064] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.320064] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.361025] ACPI: Added _OSI(Module Device) [ 0.361025] ACPI: Added _OSI(Processor Device) [ 0.361025] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.361025] ACPI: Added _OSI(Processor Aggregator Device) [ 0.361025] ACPI: Added _OSI(Linux-Dell-Video) [ 0.361025] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.361025] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.370334] ACPI: 7 ACPI AML tables successfully acquired and loaded [ 0.371309] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.373123] ACPI: Interpreter enabled [ 0.373123] ACPI: PM: (supports S0 S3 S4 S5) [ 0.373123] ACPI: Using IOAPIC for interrupt routing [ 0.373123] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.373123] PCI: Using E820 reservations for host bridge windows [ 0.373123] ACPI: Enabled 2 GPEs in block 00 to 1F [ 0.381115] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.381119] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 0.381182] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PME LTR DPC] [ 0.381296] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug AER PCIeCapability] [ 0.381302] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge [ 0.381607] PCI host bridge to bus 0000:00 [ 0.381608] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.381609] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.381610] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.381611] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.381612] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 0.381613] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfec02fff window] [ 0.381614] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window] [ 0.381615] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.381628] pci 0000:00:00.0: [1022:1480] type 00 class 0x060000 [ 0.381702] pci 0000:00:00.2: [1022:1481] type 00 class 0x080600 [ 0.381781] pci 0000:00:01.0: [1022:1482] type 00 class 0x060000 [ 0.381836] pci 0000:00:01.2: [1022:1483] type 01 class 0x060400 [ 0.381861] pci 0000:00:01.2: enabling Extended Tags [ 0.381907] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold [ 0.382015] pci 0000:00:02.0: [1022:1482] type 00 class 0x060000 [ 0.382066] pci 0000:00:03.0: [1022:1482] type 00 class 0x060000 [ 0.382120] pci 0000:00:03.1: [1022:1483] type 01 class 0x060400 [ 0.382200] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold [ 0.382343] pci 0000:00:04.0: [1022:1482] type 00 class 0x060000 [ 0.382394] pci 0000:00:05.0: [1022:1482] type 00 class 0x060000 [ 0.382447] pci 0000:00:07.0: [1022:1482] type 00 class 0x060000 [ 0.382496] pci 0000:00:07.1: [1022:1484] type 01 class 0x060400 [ 0.382519] pci 0000:00:07.1: enabling Extended Tags [ 0.382557] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold [ 0.382635] pci 0000:00:08.0: [1022:1482] type 00 class 0x060000 [ 0.382686] pci 0000:00:08.1: [1022:1484] type 01 class 0x060400 [ 0.382710] pci 0000:00:08.1: enabling Extended Tags [ 0.382755] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold [ 0.382857] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 [ 0.382957] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 [ 0.383066] pci 0000:00:18.0: [1022:1440] type 00 class 0x060000 [ 0.383090] pci 0000:00:18.1: [1022:1441] type 00 class 0x060000 [ 0.383113] pci 0000:00:18.2: [1022:1442] type 00 class 0x060000 [ 0.383135] pci 0000:00:18.3: [1022:1443] type 00 class 0x060000 [ 0.383160] pci 0000:00:18.4: [1022:1444] type 00 class 0x060000 [ 0.383183] pci 0000:00:18.5: [1022:1445] type 00 class 0x060000 [ 0.383206] pci 0000:00:18.6: [1022:1446] type 00 class 0x060000 [ 0.383230] pci 0000:00:18.7: [1022:1447] type 00 class 0x060000 [ 0.383313] pci 0000:20:00.0: [1022:57ad] type 01 class 0x060400 [ 0.383368] pci 0000:20:00.0: enabling Extended Tags [ 0.383451] pci 0000:20:00.0: PME# supported from D0 D3hot D3cold [ 0.383549] pci 0000:20:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 126.024 Gb/s with 16.0 GT/s PCIe x8 link) [ 0.383623] pci 0000:00:01.2: PCI bridge to [bus 20-2c] [ 0.383626] pci 0000:00:01.2: bridge window [io 0xd000-0xefff] [ 0.383628] pci 0000:00:01.2: bridge window [mem 0xfc200000-0xfc7fffff] [ 0.383928] pci 0000:21:04.0: [1022:57a3] type 01 class 0x060400 [ 0.383998] pci 0000:21:04.0: enabling Extended Tags [ 0.384234] pci 0000:21:04.0: PME# supported from D0 D3hot D3cold [ 0.384668] pci 0000:21:05.0: [1022:57a3] type 01 class 0x060400 [ 0.384750] pci 0000:21:05.0: enabling Extended Tags [ 0.384987] pci 0000:21:05.0: PME# supported from D0 D3hot D3cold [ 0.385428] pci 0000:21:08.0: [1022:57a4] type 01 class 0x060400 [ 0.385498] pci 0000:21:08.0: enabling Extended Tags [ 0.385656] pci 0000:21:08.0: PME# supported from D0 D3hot D3cold [ 0.385956] pci 0000:21:09.0: [1022:57a4] type 01 class 0x060400 [ 0.386026] pci 0000:21:09.0: enabling Extended Tags [ 0.386184] pci 0000:21:09.0: PME# supported from D0 D3hot D3cold [ 0.386366] pci 0000:21:0a.0: [1022:57a4] type 01 class 0x060400 [ 0.386436] pci 0000:21:0a.0: enabling Extended Tags [ 0.386594] pci 0000:21:0a.0: PME# supported from D0 D3hot D3cold [ 0.386793] pci 0000:20:00.0: PCI bridge to [bus 21-2c] [ 0.386799] pci 0000:20:00.0: bridge window [io 0xd000-0xefff] [ 0.386802] pci 0000:20:00.0: bridge window [mem 0xfc200000-0xfc7fffff] [ 0.386909] pci 0000:26:00.0: [1b21:0612] type 00 class 0x010601 [ 0.386934] pci 0000:26:00.0: reg 0x10: [io 0xe050-0xe057] [ 0.386947] pci 0000:26:00.0: reg 0x14: [io 0xe040-0xe043] [ 0.386961] pci 0000:26:00.0: reg 0x18: [io 0xe030-0xe037] [ 0.386974] pci 0000:26:00.0: reg 0x1c: [io 0xe020-0xe023] [ 0.386988] pci 0000:26:00.0: reg 0x20: [io 0xe000-0xe01f] [ 0.387001] pci 0000:26:00.0: reg 0x24: [mem 0xfc700000-0xfc7001ff] [ 0.387182] pci 0000:21:04.0: PCI bridge to [bus 26] [ 0.387188] pci 0000:21:04.0: bridge window [io 0xe000-0xefff] [ 0.387192] pci 0000:21:04.0: bridge window [mem 0xfc700000-0xfc7fffff] [ 0.387310] pci 0000:27:00.0: [10ec:8168] type 00 class 0x020000 [ 0.387336] pci 0000:27:00.0: reg 0x10: [io 0xd000-0xd0ff] [ 0.387372] pci 0000:27:00.0: reg 0x18: [mem 0xfc604000-0xfc604fff 64bit] [ 0.387394] pci 0000:27:00.0: reg 0x20: [mem 0xfc600000-0xfc603fff 64bit] [ 0.387536] pci 0000:27:00.0: supports D1 D2 [ 0.387537] pci 0000:27:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.387710] pci 0000:21:05.0: PCI bridge to [bus 27] [ 0.387716] pci 0000:21:05.0: bridge window [io 0xd000-0xdfff] [ 0.387719] pci 0000:21:05.0: bridge window [mem 0xfc600000-0xfc6fffff] [ 0.387844] pci 0000:2a:00.0: [1022:1485] type 00 class 0x130000 [ 0.387911] pci 0000:2a:00.0: enabling Extended Tags [ 0.388071] pci 0000:2a:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link) [ 0.388268] pci 0000:2a:00.1: [1022:149c] type 00 class 0x0c0330 [ 0.388573] pci 0000:2a:00.1: reg 0x10: [mem 0xfc300000-0xfc3fffff 64bit] [ 0.389425] pci 0000:2a:00.1: enabling Extended Tags [ 0.389951] pci 0000:2a:00.1: PME# supported from D0 D3hot D3cold [ 0.390358] pci 0000:2a:00.3: [1022:149c] type 00 class 0x0c0330 [ 0.390384] pci 0000:2a:00.3: reg 0x10: [mem 0xfc200000-0xfc2fffff 64bit] [ 0.390443] pci 0000:2a:00.3: enabling Extended Tags [ 0.390515] pci 0000:2a:00.3: PME# supported from D0 D3hot D3cold [ 0.390628] pci 0000:21:08.0: PCI bridge to [bus 2a] [ 0.390636] pci 0000:21:08.0: bridge window [mem 0xfc200000-0xfc3fffff] [ 0.390748] pci 0000:2b:00.0: [1022:7901] type 00 class 0x010601 [ 0.390817] pci 0000:2b:00.0: reg 0x24: [mem 0xfc500000-0xfc5007ff] [ 0.390837] pci 0000:2b:00.0: enabling Extended Tags [ 0.390934] pci 0000:2b:00.0: PME# supported from D3hot D3cold [ 0.391014] pci 0000:2b:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link) [ 0.391059] pci 0000:21:09.0: PCI bridge to [bus 2b] [ 0.391068] pci 0000:21:09.0: bridge window [mem 0xfc500000-0xfc5fffff] [ 0.391173] pci 0000:2c:00.0: [1022:7901] type 00 class 0x010601 [ 0.391243] pci 0000:2c:00.0: reg 0x24: [mem 0xfc400000-0xfc4007ff] [ 0.391262] pci 0000:2c:00.0: enabling Extended Tags [ 0.391359] pci 0000:2c:00.0: PME# supported from D3hot D3cold [ 0.391439] pci 0000:2c:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link) [ 0.391481] pci 0000:21:0a.0: PCI bridge to [bus 2c] [ 0.391490] pci 0000:21:0a.0: bridge window [mem 0xfc400000-0xfc4fffff] [ 0.391583] pci 0000:2d:00.0: [10de:1f82] type 00 class 0x030000 [ 0.391597] pci 0000:2d:00.0: reg 0x10: [mem 0xfb000000-0xfbffffff] [ 0.391610] pci 0000:2d:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.391622] pci 0000:2d:00.0: reg 0x1c: [mem 0xe0000000-0xe1ffffff 64bit pref] [ 0.391630] pci 0000:2d:00.0: reg 0x24: [io 0xf000-0xf07f] [ 0.391638] pci 0000:2d:00.0: reg 0x30: [mem 0xfc000000-0xfc07ffff pref] [ 0.391656] pci 0000:2d:00.0: BAR 3: assigned to efifb [ 0.391662] pci 0000:2d:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.391713] pci 0000:2d:00.0: PME# supported from D0 D3hot D3cold [ 0.391792] pci 0000:2d:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x8 link at 0000:00:03.1 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link) [ 0.391829] pci 0000:2d:00.1: [10de:10fa] type 00 class 0x040300 [ 0.391844] pci 0000:2d:00.1: reg 0x10: [mem 0xfc080000-0xfc083fff] [ 0.391997] pci 0000:00:03.1: PCI bridge to [bus 2d] [ 0.392001] pci 0000:00:03.1: bridge window [io 0xf000-0xffff] [ 0.392003] pci 0000:00:03.1: bridge window [mem 0xfb000000-0xfc0fffff] [ 0.392006] pci 0000:00:03.1: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref] [ 0.392045] pci 0000:2e:00.0: [1022:148a] type 00 class 0x130000 [ 0.392072] pci 0000:2e:00.0: enabling Extended Tags [ 0.392175] pci 0000:00:07.1: PCI bridge to [bus 2e] [ 0.392232] pci 0000:2f:00.0: [1022:1485] type 00 class 0x130000 [ 0.392265] pci 0000:2f:00.0: enabling Extended Tags [ 0.392380] pci 0000:2f:00.3: [1022:149c] type 00 class 0x0c0330 [ 0.392392] pci 0000:2f:00.3: reg 0x10: [mem 0xfc800000-0xfc8fffff 64bit] [ 0.392422] pci 0000:2f:00.3: enabling Extended Tags [ 0.392466] pci 0000:2f:00.3: PME# supported from D0 D3hot D3cold [ 0.392544] pci 0000:2f:00.4: [1022:1487] type 00 class 0x040300 [ 0.392552] pci 0000:2f:00.4: reg 0x10: [mem 0xfc900000-0xfc907fff] [ 0.392578] pci 0000:2f:00.4: enabling Extended Tags [ 0.392620] pci 0000:2f:00.4: PME# supported from D0 D3hot D3cold [ 0.392688] pci 0000:00:08.1: PCI bridge to [bus 2f] [ 0.392692] pci 0000:00:08.1: bridge window [mem 0xfc800000-0xfc9fffff] [ 0.392970] ACPI: PCI: Interrupt link LNKA configured for IRQ 0 [ 0.393006] ACPI: PCI: Interrupt link LNKB configured for IRQ 0 [ 0.393037] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.393076] ACPI: PCI: Interrupt link LNKD configured for IRQ 0 [ 0.393111] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.393140] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.393169] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.393197] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.393557] iommu: Default domain type: Passthrough [ 0.393557] pps_core: LinuxPPS API ver. 1 registered [ 0.393557] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti(a)linux.it> [ 0.393557] PTP clock support registered [ 0.393557] EDAC MC: Ver: 3.0.0 [ 0.393557] Registered efivars operations [ 0.393557] NetLabel: Initializing [ 0.393557] NetLabel: domain hash size = 128 [ 0.393557] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.393557] NetLabel: unlabeled traffic allowed by default [ 0.393557] PCI: Using ACPI for IRQ routing [ 0.397731] PCI: pci_cache_line_size set to 64 bytes [ 0.397825] e820: reserve RAM buffer [mem 0x09d82000-0x0bffffff] [ 0.397827] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff] [ 0.397827] e820: reserve RAM buffer [mem 0xc67e8018-0xc7ffffff] [ 0.397828] e820: reserve RAM buffer [mem 0xc6808018-0xc7ffffff] [ 0.397829] e820: reserve RAM buffer [mem 0xc68ae000-0xc7ffffff] [ 0.397829] e820: reserve RAM buffer [mem 0xcb368000-0xcbffffff] [ 0.397830] e820: reserve RAM buffer [mem 0xcf000000-0xcfffffff] [ 0.397831] e820: reserve RAM buffer [mem 0x102f380000-0x102fffffff] [ 0.398925] pci 0000:2d:00.0: vgaarb: setting as boot VGA device [ 0.398925] pci 0000:2d:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.398925] pci 0000:2d:00.0: vgaarb: bridge control possible [ 0.398925] vgaarb: loaded [ 0.398930] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.398930] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.400813] clocksource: Switched to clocksource tsc-early [ 0.404375] VFS: Disk quotas dquot_6.6.0 [ 0.404391] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.404490] AppArmor: AppArmor Filesystem Enabled [ 0.404524] pnp: PnP ACPI init [ 0.404649] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved [ 0.404744] system 00:01: [mem 0xfd200000-0xfd2fffff] has been reserved [ 0.404953] system 00:03: [io 0x0a00-0x0a0f] has been reserved [ 0.404955] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 0.404957] system 00:03: [io 0x0a20-0x0a2f] has been reserved [ 0.404958] system 00:03: [io 0x0a40-0x0a4f] has been reserved [ 0.405193] pnp 00:04: [dma 0 disabled] [ 0.405429] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.405431] system 00:05: [io 0x040b] has been reserved [ 0.405432] system 00:05: [io 0x04d6] has been reserved [ 0.405434] system 00:05: [io 0x0c00-0x0c01] has been reserved [ 0.405435] system 00:05: [io 0x0c14] has been reserved [ 0.405437] system 00:05: [io 0x0c50-0x0c51] has been reserved [ 0.405438] system 00:05: [io 0x0c52] has been reserved [ 0.405439] system 00:05: [io 0x0c6c] has been reserved [ 0.405441] system 00:05: [io 0x0c6f] has been reserved [ 0.405443] system 00:05: [io 0x0cd0-0x0cd1] has been reserved [ 0.405445] system 00:05: [io 0x0cd2-0x0cd3] has been reserved [ 0.405446] system 00:05: [io 0x0cd4-0x0cd5] has been reserved [ 0.405448] system 00:05: [io 0x0cd6-0x0cd7] has been reserved [ 0.405449] system 00:05: [io 0x0cd8-0x0cdf] has been reserved [ 0.405451] system 00:05: [io 0x0800-0x089f] has been reserved [ 0.405452] system 00:05: [io 0x0b00-0x0b0f] has been reserved [ 0.405453] system 00:05: [io 0x0b20-0x0b3f] has been reserved [ 0.405455] system 00:05: [io 0x0900-0x090f] has been reserved [ 0.405456] system 00:05: [io 0x0910-0x091f] has been reserved [ 0.405458] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.405460] system 00:05: [mem 0xfec01000-0xfec01fff] could not be reserved [ 0.405462] system 00:05: [mem 0xfedc0000-0xfedc0fff] has been reserved [ 0.405464] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.405466] system 00:05: [mem 0xfed80000-0xfed8ffff] could not be reserved [ 0.405468] system 00:05: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.405470] system 00:05: [mem 0xff000000-0xffffffff] has been reserved [ 0.405881] pnp: PnP ACPI: found 6 devices [ 0.411181] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.411222] NET: Registered PF_INET protocol family [ 0.411373] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.412251] tcp_listen_portaddr_hash hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.412305] TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.412741] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.412834] TCP: Hash tables configured (established 524288 bind 65536) [ 0.413031] MPTCP token hash table entries: 65536 (order: 8, 1572864 bytes, linear) [ 0.413102] UDP hash table entries: 32768 (order: 8, 1048576 bytes, linear) [ 0.413193] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes, linear) [ 0.413337] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.413340] NET: Registered PF_XDP protocol family [ 0.413350] pci 0000:21:04.0: PCI bridge to [bus 26] [ 0.413354] pci 0000:21:04.0: bridge window [io 0xe000-0xefff] [ 0.413359] pci 0000:21:04.0: bridge window [mem 0xfc700000-0xfc7fffff] [ 0.413368] pci 0000:21:05.0: PCI bridge to [bus 27] [ 0.413371] pci 0000:21:05.0: bridge window [io 0xd000-0xdfff] [ 0.413376] pci 0000:21:05.0: bridge window [mem 0xfc600000-0xfc6fffff] [ 0.413385] pci 0000:21:08.0: PCI bridge to [bus 2a] [ 0.413389] pci 0000:21:08.0: bridge window [mem 0xfc200000-0xfc3fffff] [ 0.413398] pci 0000:21:09.0: PCI bridge to [bus 2b] [ 0.413403] pci 0000:21:09.0: bridge window [mem 0xfc500000-0xfc5fffff] [ 0.413412] pci 0000:21:0a.0: PCI bridge to [bus 2c] [ 0.413417] pci 0000:21:0a.0: bridge window [mem 0xfc400000-0xfc4fffff] [ 0.413425] pci 0000:20:00.0: PCI bridge to [bus 21-2c] [ 0.413427] pci 0000:20:00.0: bridge window [io 0xd000-0xefff] [ 0.413432] pci 0000:20:00.0: bridge window [mem 0xfc200000-0xfc7fffff] [ 0.413441] pci 0000:00:01.2: PCI bridge to [bus 20-2c] [ 0.413443] pci 0000:00:01.2: bridge window [io 0xd000-0xefff] [ 0.413445] pci 0000:00:01.2: bridge window [mem 0xfc200000-0xfc7fffff] [ 0.413450] pci 0000:00:03.1: PCI bridge to [bus 2d] [ 0.413452] pci 0000:00:03.1: bridge window [io 0xf000-0xffff] [ 0.413454] pci 0000:00:03.1: bridge window [mem 0xfb000000-0xfc0fffff] [ 0.413456] pci 0000:00:03.1: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref] [ 0.413460] pci 0000:00:07.1: PCI bridge to [bus 2e] [ 0.413466] pci 0000:00:08.1: PCI bridge to [bus 2f] [ 0.413468] pci 0000:00:08.1: bridge window [mem 0xfc800000-0xfc9fffff] [ 0.413473] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.413474] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.413475] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.413476] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.413477] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] [ 0.413478] pci_bus 0000:00: resource 9 [mem 0xd0000000-0xfec02fff window] [ 0.413479] pci_bus 0000:00: resource 10 [mem 0xfee00000-0xffffffff window] [ 0.413480] pci_bus 0000:20: resource 0 [io 0xd000-0xefff] [ 0.413480] pci_bus 0000:20: resource 1 [mem 0xfc200000-0xfc7fffff] [ 0.413481] pci_bus 0000:21: resource 0 [io 0xd000-0xefff] [ 0.413482] pci_bus 0000:21: resource 1 [mem 0xfc200000-0xfc7fffff] [ 0.413483] pci_bus 0000:26: resource 0 [io 0xe000-0xefff] [ 0.413484] pci_bus 0000:26: resource 1 [mem 0xfc700000-0xfc7fffff] [ 0.413485] pci_bus 0000:27: resource 0 [io 0xd000-0xdfff] [ 0.413486] pci_bus 0000:27: resource 1 [mem 0xfc600000-0xfc6fffff] [ 0.413486] pci_bus 0000:2a: resource 1 [mem 0xfc200000-0xfc3fffff] [ 0.413487] pci_bus 0000:2b: resource 1 [mem 0xfc500000-0xfc5fffff] [ 0.413488] pci_bus 0000:2c: resource 1 [mem 0xfc400000-0xfc4fffff] [ 0.413489] pci_bus 0000:2d: resource 0 [io 0xf000-0xffff] [ 0.413490] pci_bus 0000:2d: resource 1 [mem 0xfb000000-0xfc0fffff] [ 0.413491] pci_bus 0000:2d: resource 2 [mem 0xd0000000-0xe1ffffff 64bit pref] [ 0.413492] pci_bus 0000:2f: resource 1 [mem 0xfc800000-0xfc9fffff] [ 0.413945] pci 0000:2d:00.1: D0 power state depends on 0000:2d:00.0 [ 0.414078] PCI: CLS 64 bytes, default 64 [ 0.414086] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported [ 0.414112] Trying to unpack rootfs image as initramfs... [ 0.414118] pci 0000:00:01.0: Adding to iommu group 0 [ 0.414127] pci 0000:00:01.2: Adding to iommu group 1 [ 0.414137] pci 0000:00:02.0: Adding to iommu group 2 [ 0.414149] pci 0000:00:03.0: Adding to iommu group 3 [ 0.414159] pci 0000:00:03.1: Adding to iommu group 4 [ 0.414170] pci 0000:00:04.0: Adding to iommu group 5 [ 0.414180] pci 0000:00:05.0: Adding to iommu group 6 [ 0.414192] pci 0000:00:07.0: Adding to iommu group 7 [ 0.414202] pci 0000:00:07.1: Adding to iommu group 8 [ 0.414214] pci 0000:00:08.0: Adding to iommu group 9 [ 0.414223] pci 0000:00:08.1: Adding to iommu group 10 [ 0.414239] pci 0000:00:14.0: Adding to iommu group 11 [ 0.414247] pci 0000:00:14.3: Adding to iommu group 11 [ 0.414285] pci 0000:00:18.0: Adding to iommu group 12 [ 0.414293] pci 0000:00:18.1: Adding to iommu group 12 [ 0.414301] pci 0000:00:18.2: Adding to iommu group 12 [ 0.414309] pci 0000:00:18.3: Adding to iommu group 12 [ 0.414318] pci 0000:00:18.4: Adding to iommu group 12 [ 0.414326] pci 0000:00:18.5: Adding to iommu group 12 [ 0.414334] pci 0000:00:18.6: Adding to iommu group 12 [ 0.414344] pci 0000:00:18.7: Adding to iommu group 12 [ 0.414355] pci 0000:20:00.0: Adding to iommu group 13 [ 0.414388] pci 0000:21:04.0: Adding to iommu group 14 [ 0.414424] pci 0000:21:05.0: Adding to iommu group 15 [ 0.414438] pci 0000:21:08.0: Adding to iommu group 16 [ 0.414451] pci 0000:21:09.0: Adding to iommu group 17 [ 0.414464] pci 0000:21:0a.0: Adding to iommu group 18 [ 0.414496] pci 0000:26:00.0: Adding to iommu group 19 [ 0.414531] pci 0000:27:00.0: Adding to iommu group 20 [ 0.414535] pci 0000:2a:00.0: Adding to iommu group 16 [ 0.414539] pci 0000:2a:00.1: Adding to iommu group 16 [ 0.414543] pci 0000:2a:00.3: Adding to iommu group 16 [ 0.414547] pci 0000:2b:00.0: Adding to iommu group 17 [ 0.414550] pci 0000:2c:00.0: Adding to iommu group 18 [ 0.414567] pci 0000:2d:00.0: Adding to iommu group 21 [ 0.414579] pci 0000:2d:00.1: Adding to iommu group 21 [ 0.414588] pci 0000:2e:00.0: Adding to iommu group 22 [ 0.414598] pci 0000:2f:00.0: Adding to iommu group 23 [ 0.414609] pci 0000:2f:00.3: Adding to iommu group 24 [ 0.414620] pci 0000:2f:00.4: Adding to iommu group 25 [ 0.415052] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40 [ 0.415054] AMD-Vi: Extended features (0x58f77ef22294ade, 0x0): PPR X2APIC NX GT IA GA PC GA_vAPIC [ 0.415059] AMD-Vi: Interrupt remapping enabled [ 0.415060] AMD-Vi: X2APIC enabled [ 0.415069] AMD-Vi: Virtual APIC enabled [ 0.415117] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.415118] software IO TLB: mapped [mem 0x00000000c27e8000-0x00000000c67e8000] (64MB) [ 0.415123] ACPI: bus type thunderbolt registered [ 0.420242] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer [ 0.420244] RAPL PMU: hw unit of domain package 2^-16 Joules [ 0.420245] LVT offset 0 assigned for vector 0x400 [ 0.420513] perf: AMD IBS detected (0x000003ff) [ 0.420519] amd_uncore: 4 amd_df counters detected [ 0.420524] amd_uncore: 6 amd_l3 counters detected [ 0.420959] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank). [ 0.421509] Initialise system trusted keyrings [ 0.421518] Key type blacklist registered [ 0.421540] workingset: timestamp_bits=36 max_order=24 bucket_order=0 [ 0.422649] zbud: loaded [ 0.422844] integrity: Platform Keyring initialized [ 0.502676] Freeing initrd memory: 25656K [ 0.747953] Key type asymmetric registered [ 0.747954] Asymmetric key parser 'x509' registered [ 0.747986] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.748020] io scheduler mq-deadline registered [ 0.748021] io scheduler kyber registered [ 0.748044] io scheduler bfq registered [ 0.749011] pcieport 0000:00:01.2: AER: enabled with IRQ 27 [ 0.749157] pcieport 0000:00:03.1: AER: enabled with IRQ 28 [ 0.749340] pcieport 0000:00:07.1: AER: enabled with IRQ 30 [ 0.749447] pcieport 0000:00:08.1: AER: enabled with IRQ 31 [ 0.750765] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.751580] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.751715] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.753065] Non-volatile memory driver v1.3 [ 0.753075] Linux agpgart interface v0.103 [ 0.754001] i8042: PNP: No PS/2 controller found. [ 0.754021] mousedev: PS/2 mouse device common for all mice [ 0.754042] rtc_cmos 00:02: RTC can wake from S4 [ 0.754201] rtc_cmos 00:02: registered as rtc0 [ 0.754210] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.754315] ledtrig-cpu: registered to indicate activity on CPUs [ 0.754325] efifb: probing for efifb [ 0.754335] efifb: framebuffer at 0xe1000000, using 3072k, total 3072k [ 0.754336] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 0.754337] efifb: scrolling: redraw [ 0.754337] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.754391] Console: switching to colour frame buffer device 128x48 [ 0.756470] fb0: EFI VGA frame buffer device [ 0.756478] hid: raw HID events driver (C) Jiri Kosina [ 0.756505] drop_monitor: Initializing network drop monitor service [ 0.764652] NET: Registered PF_INET6 protocol family [ 0.766705] Segment Routing with IPv6 [ 0.766706] RPL Segment Routing with IPv6 [ 0.767360] microcode: CPU0: patch_level=0x08701021 [ 0.767364] microcode: CPU1: patch_level=0x08701021 [ 0.767368] microcode: CPU2: patch_level=0x08701021 [ 0.767373] microcode: CPU3: patch_level=0x08701021 [ 0.767377] microcode: CPU4: patch_level=0x08701021 [ 0.767380] microcode: CPU5: patch_level=0x08701021 [ 0.767384] microcode: CPU6: patch_level=0x08701021 [ 0.767388] microcode: CPU7: patch_level=0x08701021 [ 0.767391] microcode: CPU8: patch_level=0x08701021 [ 0.767395] microcode: CPU9: patch_level=0x08701021 [ 0.767399] microcode: CPU10: patch_level=0x08701021 [ 0.767403] microcode: CPU11: patch_level=0x08701021 [ 0.767407] microcode: CPU12: patch_level=0x08701021 [ 0.767409] microcode: CPU13: patch_level=0x08701021 [ 0.767412] microcode: CPU14: patch_level=0x08701021 [ 0.767415] microcode: CPU15: patch_level=0x08701021 [ 0.767418] microcode: Microcode Update Driver: v2.2. [ 0.767520] resctrl: L3 allocation detected [ 0.767520] resctrl: L3DATA allocation detected [ 0.767521] resctrl: L3CODE allocation detected [ 0.767522] resctrl: MB allocation detected [ 0.767522] resctrl: L3 monitoring detected [ 0.767524] IPI shorthand broadcast: enabled [ 0.767531] sched_clock: Marking stable (767256987, 258682)->(775279071, -7763402) [ 0.767830] registered taskstats version 1 [ 0.767927] Loading compiled-in X.509 certificates [ 0.767949] Loaded X.509 cert 'SUSE Linux Enterprise Secure Boot Signkey: a746b64b6cb71f13385638055f46162bac632acd' [ 0.768047] zswap: loaded using pool lzo/zbud [ 0.768094] page_owner is disabled [ 0.768123] Key type ._fscrypt registered [ 0.768124] Key type .fscrypt registered [ 0.768124] Key type fscrypt-provisioning registered [ 0.769768] Key type encrypted registered [ 0.769770] AppArmor: AppArmor sha1 policy hashing enabled [ 0.770018] ima: No TPM chip found, activating TPM-bypass! [ 0.770021] Loading compiled-in module X.509 certificates [ 0.770045] Loaded X.509 cert 'SUSE Linux Enterprise Secure Boot Signkey: a746b64b6cb71f13385638055f46162bac632acd' [ 0.770046] ima: Allocated hash algorithm: sha256 [ 0.770051] ima: No architecture policies found [ 0.770056] evm: Initialising EVM extended attributes: [ 0.770056] evm: security.selinux [ 0.770057] evm: security.SMACK64 (disabled) [ 0.770057] evm: security.SMACK64EXEC (disabled) [ 0.770058] evm: security.SMACK64TRANSMUTE (disabled) [ 0.770058] evm: security.SMACK64MMAP (disabled) [ 0.770059] evm: security.apparmor [ 0.770059] evm: security.ima [ 0.770060] evm: security.capability [ 0.770060] evm: HMAC attrs: 0x1 [ 0.770205] PM: Magic number: 3:960:330 [ 0.770219] tty tty51: hash matches [ 0.770309] RAS: Correctable Errors collector initialized. [ 0.771222] Freeing unused decrypted memory: 2036K [ 0.771454] Freeing unused kernel image (initmem) memory: 2864K [ 0.790031] Write protecting the kernel read-only data: 26624k [ 0.790303] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 0.790391] Freeing unused kernel image (rodata/data gap) memory: 896K [ 0.790394] Run /init as init process [ 0.790395] with arguments: [ 0.790396] /init [ 0.790396] with environment: [ 0.790397] HOME=/ [ 0.790397] TERM=linux [ 0.790398] BOOT_IMAGE=/boot/vmlinuz-5.14.21-150500.55.12-default [ 0.790398] splash=silent [ 0.818418] systemd[1]: systemd 249.16+suse.173.g6441bb4114 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR -IMA -SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [ 0.818479] systemd[1]: Detected architecture x86-64. [ 0.818480] systemd[1]: Running in initial RAM disk. [ 0.864680] systemd[1]: Hostname set to <Warpi>. [ 0.897915] systemd[1]: Queued start job for default target Initrd Default Target. [ 0.904073] systemd[1]: Created slice Slice /system/systemd-hibernate-resume. [ 0.904114] systemd[1]: Reached target Initrd /usr File System. [ 0.904130] systemd[1]: Reached target Slice Units. [ 0.904141] systemd[1]: Reached target Swaps. [ 0.904149] systemd[1]: Reached target Timer Units. [ 0.904196] systemd[1]: Listening on Journal Socket (/dev/log). [ 0.904242] systemd[1]: Listening on Journal Socket. [ 0.904290] systemd[1]: Listening on udev Control Socket. [ 0.904327] systemd[1]: Listening on udev Kernel Socket. [ 0.904336] systemd[1]: Reached target Socket Units. [ 0.904780] systemd[1]: Started Entropy Daemon based on the HAVEGE algorithm. [ 0.905298] systemd[1]: Starting Create List of Static Device Nodes... [ 0.905950] systemd[1]: Starting Journal Service... [ 0.906442] systemd[1]: Starting Load Kernel Modules... [ 0.906900] systemd[1]: Starting Setup Virtual Console... [ 0.907403] systemd[1]: Finished Create List of Static Device Nodes. [ 0.907829] systemd[1]: Starting Create Static Device Nodes in /dev... [ 0.910348] systemd[1]: Finished Create Static Device Nodes in /dev. [ 0.914389] systemd[1]: Finished Setup Virtual Console. [ 0.914861] systemd[1]: Starting dracut ask for additional cmdline parameters... [ 0.918147] SCSI subsystem initialized [ 0.918896] alua: device handler registered [ 0.919427] emc: device handler registered [ 0.919982] rdac: device handler registered [ 0.925090] device-mapper: uevent: version 1.0.3 [ 0.925118] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel(a)redhat.com [ 0.928185] systemd[1]: Finished Load Kernel Modules. [ 0.928694] systemd[1]: Starting Apply Kernel Variables... [ 0.931004] systemd[1]: Finished Apply Kernel Variables. [ 0.933071] systemd[1]: Started Journal Service. [ 1.040055] raid6: avx2x4 gen() 35652 MB/s [ 1.106749] raid6: avx2x4 xor() 10356 MB/s [ 1.174749] raid6: avx2x2 gen() 38097 MB/s [ 1.242755] raid6: avx2x2 xor() 23992 MB/s [ 1.310756] raid6: avx2x1 gen() 29991 MB/s [ 1.378756] raid6: avx2x1 xor() 17910 MB/s [ 1.378756] raid6: using algorithm avx2x2 gen() 38097 MB/s [ 1.378757] raid6: .... xor() 23992 MB/s, rmw enabled [ 1.378758] raid6: using avx2x2 recovery algorithm [ 1.379350] xor: measuring software checksum speed [ 1.379670] prefetch64-sse : 30962 MB/sec [ 1.380016] generic_sse : 28481 MB/sec [ 1.380017] xor: using function: prefetch64-sse (30962 MB/sec) [ 1.428875] Btrfs loaded, crc32c=crc32c-intel, assert=on, zoned=yes [ 1.446764] tsc: Refined TSC clocksource calibration: 4249.999 MHz [ 1.446773] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3d42e212f64, max_idle_ns: 440795407840 ns [ 1.446796] clocksource: Switched to clocksource tsc [ 1.477592] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.477634] ACPI: button: Power Button [PWRB] [ 1.477671] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.486730] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01) [ 1.490224] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver [ 1.490296] sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address [ 1.490360] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0) [ 1.494776] ACPI: button: Power Button [PWRF] [ 1.496784] cryptd: max_cpu_qlen set to 1000 [ 1.498918] ACPI: bus type USB registered [ 1.498931] usbcore: registered new interface driver usbfs [ 1.498935] usbcore: registered new interface driver hub [ 1.498947] usbcore: registered new device driver usb [ 1.502042] libata version 3.00 loaded. [ 1.507377] AVX2 version of gcm_enc/dec engaged. [ 1.507413] AES CTR mode by8 optimization enabled [ 1.507734] ahci 0000:26:00.0: version 3.0 [ 1.507921] ahci 0000:26:00.0: SSS flag set, parallel bus scan disabled [ 1.507966] ahci 0000:26:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 1.507969] ahci 0000:26:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc [ 1.517334] scsi host0: ahci [ 1.517514] scsi host1: ahci [ 1.517549] ata1: SATA max UDMA/133 abar m512@0xfc700000 port 0xfc700100 irq 39 [ 1.517551] ata2: SATA max UDMA/133 abar m512@0xfc700000 port 0xfc700180 irq 39 [ 1.517768] ahci 0000:2b:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 1.517771] ahci 0000:2b:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part [ 1.517892] ACPI: bus type drm_connector registered [ 1.518389] scsi host2: ahci [ 1.518430] ata3: SATA max UDMA/133 abar m2048@0xfc500000 port 0xfc500100 irq 40 [ 1.518903] ahci 0000:2c:00.0: AHCI 0001.0301 32 slots 3 ports 6 Gbps 0x13 impl SATA mode [ 1.518907] ahci 0000:2c:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part [ 1.519442] scsi host3: ahci [ 1.519571] scsi host4: ahci [ 1.519674] scsi host5: ahci [ 1.519780] scsi host6: ahci [ 1.519868] scsi host7: ahci [ 1.519914] ata4: SATA max UDMA/133 abar m2048@0xfc400000 port 0xfc400100 irq 41 [ 1.519918] ata5: SATA max UDMA/133 abar m2048@0xfc400000 port 0xfc400180 irq 42 [ 1.519919] ata6: DUMMY [ 1.519919] ata7: DUMMY [ 1.519922] ata8: SATA max UDMA/133 abar m2048@0xfc400000 port 0xfc400300 irq 45 [ 1.833235] ata3: SATA link down (SStatus 0 SControl 300) [ 1.994880] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.994891] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.994902] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.994926] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.995237] ata4.00: supports DRM functions and may not be fully accessible [ 1.995238] ata4.00: ATA-11: Samsung SSD 860 EVO 500GB, RVT03B6Q, max UDMA/133 [ 1.995242] ata5.00: supports DRM functions and may not be fully accessible [ 1.995244] ata5.00: ATA-11: Samsung SSD 860 EVO 500GB, RVT03B6Q, max UDMA/133 [ 1.995757] ata4.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 1.995761] ata5.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 1.996026] ata8.00: ATAPI: HL-DT-ST DVDRAM GH24NSD5, LV00, max UDMA/133 [ 1.997629] ata8.00: configured for UDMA/133 [ 1.998453] ata5.00: Features: Trust Dev-Sleep NCQ-sndrcv [ 1.998460] ata4.00: Features: Trust Dev-Sleep NCQ-sndrcv [ 1.998734] ata5.00: supports DRM functions and may not be fully accessible [ 1.998741] ata4.00: supports DRM functions and may not be fully accessible [ 2.002007] ata4.00: configured for UDMA/133 [ 2.002012] ata5.00: configured for UDMA/133 [ 2.024266] ata1.00: ATA-10: ST2000LM015-2E8174, 0001, max UDMA/133 [ 2.059319] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.398170] ata1.00: configured for UDMA/133 [ 2.398271] scsi 0:0:0:0: Direct-Access ATA ST2000LM015-2E81 0001 PQ: 0 ANSI: 5 [ 2.398403] scsi 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.874877] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.907973] ata2.00: ATA-10: ST2000LM015-2E8174, 0001, max UDMA/133 [ 2.942899] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 3.293969] ata2.00: configured for UDMA/133 [ 3.294030] scsi 1:0:0:0: Direct-Access ATA ST2000LM015-2E81 0001 PQ: 0 ANSI: 5 [ 3.294154] scsi 1:0:0:0: Attached scsi generic sg1 type 0 [ 3.294269] scsi 3:0:0:0: Direct-Access ATA Samsung SSD 860 3B6Q PQ: 0 ANSI: 5 [ 3.294388] scsi 3:0:0:0: Attached scsi generic sg2 type 0 [ 3.294479] scsi 4:0:0:0: Direct-Access ATA Samsung SSD 860 3B6Q PQ: 0 ANSI: 5 [ 3.294609] scsi 4:0:0:0: Attached scsi generic sg3 type 0 [ 3.295617] scsi 7:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NSD5 LV00 PQ: 0 ANSI: 5 [ 3.339384] scsi 7:0:0:0: Attached scsi generic sg4 type 5 [ 3.341304] xhci_hcd 0000:2a:00.1: xHCI Host Controller [ 3.341310] xhci_hcd 0000:2a:00.1: new USB bus registered, assigned bus number 1 [ 3.341470] xhci_hcd 0000:2a:00.1: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410 [ 3.341968] xhci_hcd 0000:2a:00.1: xHCI Host Controller [ 3.341970] xhci_hcd 0000:2a:00.1: new USB bus registered, assigned bus number 2 [ 3.341972] xhci_hcd 0000:2a:00.1: Host supports USB 3.1 Enhanced SuperSpeed [ 3.342023] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.14 [ 3.342026] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.342028] usb usb1: Product: xHCI Host Controller [ 3.342029] usb usb1: Manufacturer: Linux 5.14.21-150500.55.12-default xhci-hcd [ 3.342030] usb usb1: SerialNumber: 0000:2a:00.1 [ 3.342164] hub 1-0:1.0: USB hub found [ 3.342177] hub 1-0:1.0: 6 ports detected [ 3.342441] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.342463] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.14 [ 3.342465] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.342466] usb usb2: Product: xHCI Host Controller [ 3.342467] usb usb2: Manufacturer: Linux 5.14.21-150500.55.12-default xhci-hcd [ 3.342467] usb usb2: SerialNumber: 0000:2a:00.1 [ 3.342546] hub 2-0:1.0: USB hub found [ 3.342580] hub 2-0:1.0: 4 ports detected [ 3.342666] usb: port power management may be unreliable [ 3.342805] xhci_hcd 0000:2a:00.3: xHCI Host Controller [ 3.342809] xhci_hcd 0000:2a:00.3: new USB bus registered, assigned bus number 3 [ 3.342967] xhci_hcd 0000:2a:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410 [ 3.343337] xhci_hcd 0000:2a:00.3: xHCI Host Controller [ 3.343339] xhci_hcd 0000:2a:00.3: new USB bus registered, assigned bus number 4 [ 3.343341] xhci_hcd 0000:2a:00.3: Host supports USB 3.1 Enhanced SuperSpeed [ 3.343385] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.14 [ 3.343388] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.343390] usb usb3: Product: xHCI Host Controller [ 3.343391] usb usb3: Manufacturer: Linux 5.14.21-150500.55.12-default xhci-hcd [ 3.343392] usb usb3: SerialNumber: 0000:2a:00.3 [ 3.343491] hub 3-0:1.0: USB hub found [ 3.343505] hub 3-0:1.0: 6 ports detected [ 3.343721] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.343743] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.14 [ 3.343745] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.343746] usb usb4: Product: xHCI Host Controller [ 3.343747] usb usb4: Manufacturer: Linux 5.14.21-150500.55.12-default xhci-hcd [ 3.343747] usb usb4: SerialNumber: 0000:2a:00.3 [ 3.343813] hub 4-0:1.0: USB hub found [ 3.343823] hub 4-0:1.0: 4 ports detected [ 3.344032] xhci_hcd 0000:2f:00.3: xHCI Host Controller [ 3.344036] xhci_hcd 0000:2f:00.3: new USB bus registered, assigned bus number 5 [ 3.344144] xhci_hcd 0000:2f:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410 [ 3.344446] xhci_hcd 0000:2f:00.3: xHCI Host Controller [ 3.344449] xhci_hcd 0000:2f:00.3: new USB bus registered, assigned bus number 6 [ 3.344451] xhci_hcd 0000:2f:00.3: Host supports USB 3.1 Enhanced SuperSpeed [ 3.344493] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.14 [ 3.344496] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.344498] usb usb5: Product: xHCI Host Controller [ 3.344499] usb usb5: Manufacturer: Linux 5.14.21-150500.55.12-default xhci-hcd [ 3.344500] usb usb5: SerialNumber: 0000:2f:00.3 [ 3.344619] hub 5-0:1.0: USB hub found [ 3.344630] hub 5-0:1.0: 4 ports detected [ 3.344788] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.344811] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.14 [ 3.344812] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.344813] usb usb6: Product: xHCI Host Controller [ 3.344814] usb usb6: Manufacturer: Linux 5.14.21-150500.55.12-default xhci-hcd [ 3.344815] usb usb6: SerialNumber: 0000:2f:00.3 [ 3.344883] hub 6-0:1.0: USB hub found [ 3.344891] hub 6-0:1.0: 4 ports detected [ 3.349292] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 3.349296] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 3.349302] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 3.349304] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 3.349305] sd 0:0:0:0: [sda] Write Protect is off [ 3.349307] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.349312] sd 1:0:0:0: [sdb] Write Protect is off [ 3.349314] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.349316] ata5.00: Enabling discard_zeroes_data [ 3.349319] ata4.00: Enabling discard_zeroes_data [ 3.349320] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.349326] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.349330] sd 4:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 3.349331] sd 3:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 3.349337] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 3.349340] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 3.349340] sd 4:0:0:0: [sdc] Write Protect is off [ 3.349341] sd 3:0:0:0: [sdd] Write Protect is off [ 3.349343] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 3.349343] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.349354] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.349354] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.349376] sd 4:0:0:0: [sdc] Preferred minimum I/O size 512 bytes [ 3.349376] sd 3:0:0:0: [sdd] Preferred minimum I/O size 512 bytes [ 3.349710] ata5.00: Enabling discard_zeroes_data [ 3.349711] ata4.00: Enabling discard_zeroes_data [ 3.393637] sdd: sdd1 sdd2 sdd3 [ 3.394175] sr 7:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.394177] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.394588] sd 3:0:0:0: [sdd] supports TCG Opal [ 3.394589] sd 3:0:0:0: [sdd] Attached SCSI disk [ 3.402039] sdc: sdc1 [ 3.402947] sd 4:0:0:0: [sdc] supports TCG Opal [ 3.402949] sd 4:0:0:0: [sdc] Attached SCSI disk [ 3.443357] sr 7:0:0:0: Attached scsi CD-ROM sr0 [ 3.447682] sda: sda1 [ 3.447741] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.449631] sdb: sdb1 [ 3.449687] sd 1:0:0:0: [sdb] Attached SCSI disk [ 3.469987] BTRFS: device fsid 8f354b07-c1b0-40e3-a77e-dd9112334073 devid 1 transid 419569 /dev/sdd3 scanned by (udev-worker) (469) [ 3.481847] PM: Image not found (code -22) [ 3.513530] [drm:nouveau_drm_init [nouveau]] Loading Nouveau with parameters: [ 3.513568] [drm:nouveau_drm_init [nouveau]] ... tv_disable : 0 [ 3.513598] [drm:nouveau_drm_init [nouveau]] ... ignorelid : 0 [ 3.513626] [drm:nouveau_drm_init [nouveau]] ... duallink : 1 [ 3.513655] [drm:nouveau_drm_init [nouveau]] ... nofbaccel : 0 [ 3.513683] [drm:nouveau_drm_init [nouveau]] ... config : (null) [ 3.513712] [drm:nouveau_drm_init [nouveau]] ... debug : (null) [ 3.513740] [drm:nouveau_drm_init [nouveau]] ... noaccel : 0 [ 3.513769] [drm:nouveau_drm_init [nouveau]] ... modeset : -1 [ 3.513797] [drm:nouveau_drm_init [nouveau]] ... runpm : -1 [ 3.513825] [drm:nouveau_drm_init [nouveau]] ... vram_pushbuf : 0 [ 3.513854] [drm:nouveau_drm_init [nouveau]] ... hdmimhz : 0 [ 3.513907] nouveau 0000:2d:00.0: Probe of device 1f82 skipped due to experimental state of this driver. You can enable nouveau driver via force_probe=1 option (kernel boot parameter 'nouveau.force_probe=1') However we recommend the usage of nVidia's openGPU driver meanwhile. See our Release Notes for more details. [ 3.594756] usb 1-6: new full-speed USB device number 2 using xhci_hcd [ 3.598757] usb 3-2: new full-speed USB device number 2 using xhci_hcd [ 3.598757] usb 5-4: new low-speed USB device number 2 using xhci_hcd [ 3.755632] usb 5-4: New USB device found, idVendor=046a, idProduct=0023, bcdDevice= 0.27 [ 3.755635] usb 5-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.758997] usb 1-6: New USB device found, idVendor=062a, idProduct=5918, bcdDevice= 1.02 [ 3.758999] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.759001] usb 1-6: Product: 2.4G Keyboard Mouse [ 3.759002] usb 1-6: Manufacturer: MOSART Semi. [ 3.793114] usbcore: registered new interface driver usbhid [ 3.793115] usbhid: USB HID core driver [ 3.794158] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:01.2/0000:20:00.0/0000:21:08.0/0000:2a:00.1/usb1/1-6/1-6:1.0/0003:062A:5918.0002/input/input2 [ 3.854826] hid-generic 0003:062A:5918.0002: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:2a:00.1-6/input0 [ 3.854972] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:01.2/0000:20:00.0/0000:21:08.0/0000:2a:00.1/usb1/1-6/1-6:1.1/0003:062A:5918.0004/input/input3 [ 3.855032] input: MOSART Semi. 2.4G Keyboard Mouse Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:20:00.0/0000:21:08.0/0000:2a:00.1/usb1/1-6/1-6:1.1/0003:062A:5918.0004/input/input4 [ 3.918798] input: MOSART Semi. 2.4G Keyboard Mouse System Control as /devices/pci0000:00/0000:00:01.2/0000:20:00.0/0000:21:08.0/0000:2a:00.1/usb1/1-6/1-6:1.1/0003:062A:5918.0004/input/input5 [ 3.918825] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:01.2/0000:20:00.0/0000:21:08.0/0000:2a:00.1/usb1/1-6/1-6:1.1/0003:062A:5918.0004/input/input6 [ 3.918869] hid-generic 0003:062A:5918.0004: input,hiddev96,hidraw1: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:2a:00.1-6/input1 [ 3.919352] input: HID 046a:0023 as /devices/pci0000:00/0000:00:08.1/0000:2f:00.3/usb5/5-4/5-4:1.0/0003:046A:0023.0001/input/input7 [ 3.950375] usb 3-2: New USB device found, idVendor=046d, idProduct=0a6d, bcdDevice= 0.23 [ 3.950377] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.950379] usb 3-2: Product: G433 Gaming Headset [ 3.950380] usb 3-2: Manufacturer: Logitech [ 3.950380] usb 3-2: SerialNumber: 000000000000 [ 3.978860] cherry 0003:046A:0023.0001: input,hidraw2: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:2f:00.3-4/input0 [ 3.978978] input: HID 046a:0023 as /devices/pci0000:00/0000:00:08.1/0000:2f:00.3/usb5/5-4/5-4:1.1/0003:046A:0023.0003/input/input8 [ 4.038807] cherry 0003:046A:0023.0003: input,hidraw3: USB HID v1.11 Device [HID 046a:0023] on usb-0000:2f:00.3-4/input1 [ 4.253969] input: Logitech G433 Gaming Headset Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:20:00.0/0000:21:08.0/0000:2a:00.3/usb3/3-2/3-2:1.3/0003:046D:0A6D.0005/input/input9 [ 4.310911] input: Logitech G433 Gaming Headset as /devices/pci0000:00/0000:00:01.2/0000:20:00.0/0000:21:08.0/0000:2a:00.3/usb3/3-2/3-2:1.3/0003:046D:0A6D.0005/input/input10 [ 4.310968] hid-generic 0003:046D:0A6D.0005: input,hiddev97,hidraw4: USB HID v1.11 Device [Logitech G433 Gaming Headset] on usb-0000:2a:00.3-2/input3 [ 4.358991] BTRFS info (device sdd3): disk space caching is enabled [ 4.358994] BTRFS info (device sdd3): has skinny extents [ 4.367744] BTRFS info (device sdd3): enabling ssd optimizations [ 4.438766] usb 3-5: new full-speed USB device number 3 using xhci_hcd [ 4.599423] usb 3-5: New USB device found, idVendor=1462, idProduct=7c37, bcdDevice= 0.01 [ 4.599427] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.599428] usb 3-5: Product: MYSTIC LIGHT [ 4.599429] usb 3-5: Manufacturer: MSI [ 4.599430] usb 3-5: SerialNumber: A02019050806 [ 4.604988] systemd-journald[281]: Received SIGTERM from PID 1 (systemd). [ 4.619546] input: MSI MYSTIC LIGHT as /devices/pci0000:00/0000:00:01.2/0000:20:00.0/0000:21:08.0/0000:2a:00.3/usb3/3-5/3-5:1.0/0003:1462:7C37.0006/input/input13 [ 4.619598] hid-generic 0003:1462:7C37.0006: input,hiddev98,hidraw5: USB HID v1.10 Device [MSI MYSTIC LIGHT ] on usb-0000:2a:00.3-5/input0 [ 4.697161] systemd[1]: systemd 249.16+suse.173.g6441bb4114 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR -IMA -SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [ 4.714782] systemd[1]: Detected architecture x86-64. [ 4.746755] usb 3-6: new high-speed USB device number 4 using xhci_hcd [ 4.901848] usb 3-6: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=60.70 [ 4.901851] usb 3-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 4.901852] usb 3-6: Product: USB2.0 Hub [ 4.943741] hub 3-6:1.0: USB hub found [ 4.944346] hub 3-6:1.0: 4 ports detected [ 4.955404] systemd[1]: initrd-switch-root.service: Deactivated successfully. [ 4.955517] systemd[1]: Stopped Switch Root. [ 4.955603] systemd[1]: haveged.service: Stop job pending for unit, skipping automatic restart. [ 4.955708] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. [ 4.955933] systemd[1]: Created slice Slice /system/getty. [ 4.956162] systemd[1]: Created slice Slice /system/modprobe. [ 4.956393] systemd[1]: Created slice Slice /system/systemd-fsck. [ 4.956515] systemd[1]: Created slice User and Session Slice. [ 4.956621] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 4.956668] systemd[1]: Stopped target Switch Root. [ 4.956687] systemd[1]: Stopped target Initrd File Systems. [ 4.956700] systemd[1]: Stopped target Initrd Root File System. [ 4.956733] systemd[1]: Reached target Slice Units. [ 4.956756] systemd[1]: Reached target System Time Set. [ 4.956788] systemd[1]: Reached target Local Verity Protected Volumes. [ 4.956829] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 4.957110] systemd[1]: Listening on LVM2 poll daemon socket. [ 4.957153] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 4.957525] systemd[1]: Listening on udev Control Socket. [ 4.957584] systemd[1]: Listening on udev Kernel Socket. [ 4.957979] systemd[1]: Mounting Huge Pages File System... [ 4.958419] systemd[1]: Mounting POSIX Message Queue File System... [ 4.958875] systemd[1]: Mounting Kernel Debug File System... [ 4.959317] systemd[1]: Mounting Kernel Trace File System... [ 4.959983] systemd[1]: Starting Create List of Static Device Nodes... [ 4.960512] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 4.961030] systemd[1]: Starting Load Kernel Module configfs... [ 4.961553] systemd[1]: Starting Load Kernel Module drm... [ 4.962051] systemd[1]: Starting Load Kernel Module fuse... [ 4.962110] systemd[1]: plymouth-start.service: Deactivated successfully. [ 4.962133] systemd[1]: plymouth-start.service: Unit process 427 (plymouthd) remains running after unit stopped. [ 4.962214] systemd[1]: Stopped Show Plymouth Boot Screen. [ 4.962289] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped. [ 4.962306] systemd[1]: Reached target Local Encrypted Volumes. [ 4.962343] systemd[1]: plymouth-switch-root.service: Deactivated successfully. [ 4.962385] systemd[1]: Stopped Plymouth switch root service. [ 4.962435] systemd[1]: systemd-fsck-root.service: Deactivated successfully. [ 4.962472] systemd[1]: Stopped File System Check on Root Device. [ 4.962516] systemd[1]: Stopped Journal Service. [ 4.966184] systemd[1]: Listening on Syslog Socket. [ 4.966211] systemd[1]: Stopped Entropy Daemon based on the HAVEGE algorithm. [ 4.966922] systemd[1]: Starting Journal Service... [ 4.967483] systemd[1]: Starting Load Kernel Modules... [ 4.967956] systemd[1]: Starting Remount Root and Kernel File Systems... [ 4.968440] systemd[1]: Starting Coldplug All udev Devices... [ 4.969238] systemd[1]: Mounted Huge Pages File System. [ 4.969318] systemd[1]: Mounted POSIX Message Queue File System. [ 4.969380] systemd[1]: Mounted Kernel Debug File System. [ 4.969435] systemd[1]: Mounted Kernel Trace File System. [ 4.969624] systemd[1]: Finished Create List of Static Device Nodes. [ 4.969791] systemd[1]: modprobe(a)drm.service: Deactivated successfully. [ 4.969894] systemd[1]: Finished Load Kernel Module drm. [ 4.971242] systemd[1]: modprobe(a)configfs.service: Deactivated successfully. [ 4.971347] systemd[1]: Finished Load Kernel Module configfs. [ 4.971778] systemd[1]: Mounting Kernel Configuration File System... [ 4.972558] BTRFS info (device sdd3): disk space caching is enabled [ 4.973480] systemd[1]: Finished Remount Root and Kernel File Systems. [ 4.973572] systemd[1]: Mounted Kernel Configuration File System. [ 4.973636] systemd[1]: Condition check resulted in One time configuration for iscsi.service being skipped. [ 4.973659] systemd[1]: Condition check resulted in First Boot Wizard being skipped. [ 4.974217] fuse: init (API version 7.34) [ 4.974360] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 4.974388] systemd[1]: Condition check resulted in Create System Users being skipped. [ 4.974919] systemd[1]: Starting Create Static Device Nodes in /dev... [ 4.975124] systemd[1]: modprobe(a)fuse.service: Deactivated successfully. [ 4.975254] systemd[1]: Finished Load Kernel Module fuse. [ 4.975458] systemd[1]: Finished Load Kernel Modules. [ 4.975920] systemd[1]: Mounting FUSE Control File System... [ 4.976643] systemd[1]: Starting Apply Kernel Variables for 5.14.21-150500.55.12-default from /boot... [ 4.977164] systemd[1]: Mounted FUSE Control File System. [ 4.977863] systemd[1]: Started Journal Service. [ 5.120771] libphy: r8169: probed [ 5.120952] r8169 0000:27:00.0 eth0: RTL8168h/8111h, 2c:f0:5d:7a:7a:4c, XID 541, IRQ 75 -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213972] system intermittently fails to detect Bluetooth LE devices
by bugzilla_noreply＠suse.com 04 Aug '23

04 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213972 https://bugzilla.suse.com/show_bug.cgi?id=1213972#c3 --- Comment #3 from Takashi Iwai <tiwai(a)suse.com> --- Yes, at least a quick check of the first 6.4.x kernel in TW history would be helpful. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213972] system intermittently fails to detect Bluetooth LE devices
by bugzilla_noreply＠suse.com 04 Aug '23

04 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213972 https://bugzilla.suse.com/show_bug.cgi?id=1213972#c2 dziobian <brunopitrus(a)hotmail.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Flags|needinfo?(brunopitrus@hotma | |il.com) | --- Comment #2 from dziobian <brunopitrus(a)hotmail.com> --- I installed kernel-default-6.3.9-1.1 (from snapshot 20230706 — the oldest in this directory) and bluetooth LE works perfectly. Should I do a binsearch on the snapshots to determine which release broke it? -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213914] Possible BUG with the last KERNEL-FIRMWARE update (kernel-firmware-all-20230724-150500.3.3.1.noarch.rpm). UPDATE 2023-8-4: No longer a problem with the last kernel update(5.14.21-150500.55.12-default )
by bugzilla_noreply＠suse.com 04 Aug '23

04 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213914 https://bugzilla.suse.com/show_bug.cgi?id=1213914#c3 Takashi Iwai <tiwai(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Flags|needinfo?(infosarzo(a)gmail.c | |om) | Resolution|--- |FIXED --- Comment #3 from Takashi Iwai <tiwai(a)suse.com> --- OK, thanks for the information. Then it's basically fixed with the full updates. Let's close the bug now. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213914] New: Possible BUG with the last KERNEL-FIRMWARE update (kernel-firmware-all-20230724-150500.3.3.1.noarch.rpm)
by bugzilla_noreply＠suse.com 04 Aug '23

04 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213914 Bug ID: 1213914 Summary: Possible BUG with the last KERNEL-FIRMWARE update (kernel-firmware-all-20230724-150500.3.3.1.noarch.rpm) Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.5 Hardware: x86-64 OS: openSUSE Leap 15.5 Status: NEW Severity: Critical Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: infosarzo(a)gmail.com QA Contact: qa-bugs(a)suse.de Target Milestone: --- Found By: --- Blocker: --- My system: OpenSuse Leap 15.5, "out of the box" installation (no particular configuration, tweaks or 3rd party driver). My GPU AMD Radeon 7600. It worked fine until last kernel-firmware update. After the last kernel-firmware update (packages: kernel-firmware-all-20230724-150500.3.3.1.noarch.rpm and all the other kernel-firmware-…) there was a major problem with the graphical interface: a message (just for a second between grub menu and kde splash screen) complaining about "amdgpu… something", I could login and see the desktop but then the GUI freeze in a matter of seconds. On reboot I tried “safe mode…” from grub menu, but I saw the same messages as before and the GUI frozen. Next I have reinstalled the system with all the updates except the last kernel-firmware and this way the system works properly. Unfortunately I didn’t keep any log of the error. How to Reproduce: boot a x86-64 system with a GPU AMD radeon 7600 and the last kernel-firmware update(version 20230724-150500.3.3.1). -- You are receiving this mail because: You are the assignee for the bug.

1 2

[Bug 1213972] system intermittently fails to detect Bluetooth LE devices
by bugzilla_noreply＠suse.com 04 Aug '23

04 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213972 https://bugzilla.suse.com/show_bug.cgi?id=1213972#c1 Takashi Iwai <tiwai(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |brunopitrus(a)hotmail.com, | |tiwai(a)suse.com Flags| |needinfo?(brunopitrus@hotma | |il.com) --- Comment #1 from Takashi Iwai <tiwai(a)suse.com> --- Could you verify whether it's a regression from 6.3? You can boot with the old 6.3.x kernel and see whether the problem happens or not. If no 6.3 kernel is on your system any longer, you can still take it from TW history repo http://download.opensuse.org/history/ -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213948] nouveau: Resolution limited to 1024x768 after update Leap 15.4 -> Leap 15.5
by bugzilla_noreply＠suse.com 04 Aug '23

04 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213948 https://bugzilla.suse.com/show_bug.cgi?id=1213948#c6 --- Comment #6 from Stefan Dirsch <sndirsch(a)suse.com> --- Could you add drm.debug=0xe to kernel boot command line and add output of 'dmesg' here? Thanks. --> https://documentation.suse.com/smart/systems-management/html/task-modify-ke… -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213948] nouveau: Resolution limited to 1024x768 after update Leap 15.4 -> Leap 15.5
by bugzilla_noreply＠suse.com 04 Aug '23

04 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213948 https://bugzilla.suse.com/show_bug.cgi?id=1213948#c5 --- Comment #5 from Takashi Iwai <tiwai(a)suse.com> --- We disabled nouveau driver for the recent chips that are known to be broken as default on Leap 15.5, and I believe that's it. In such a case, you should see the relevant kernel message, and you can enable it forcibly via a boot / module option. Please check the dmesg output. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213948] nouveau: Resolution limited to 1024x768 after update Leap 15.4 -> Leap 15.5
by bugzilla_noreply＠suse.com 04 Aug '23

04 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213948 https://bugzilla.suse.com/show_bug.cgi?id=1213948#c4 Stefan Dirsch <sndirsch(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |patrik.jakobsson(a)suse.com, | |tiwai(a)suse.com, | |tzimmermann(a)suse.com QA Contact|sndirsch(a)suse.com |qa-bugs(a)suse.de Component|X11 3rd Party Driver |Kernel Assignee|gfx-bugs(a)suse.de |kernel-bugs(a)opensuse.org Summary|Leap 15.5: nVidia: |nouveau: Resolution limited |Auflösung nur 1024x768 nach |to 1024x768 after update |Distr.-Upgrade |Leap 15.4 -> Leap 15.5 --- Comment #4 from Stefan Dirsch <sndirsch(a)suse.com> --- Ok. Looks like a regression in 5.14.21-150500.55.7 (Leap 15.5) for nouveau driver compared to 5.14.21-150400.24.69 (Leap 15.5). For me this looks like a fallback to fbdev driver (nouveau driver cannot be loaded) or the monitor cannot be detected. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213805] OpenSUSE installation support for SMARC RZ/G2L platform
by bugzilla_noreply＠suse.com 04 Aug '23

04 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213805 https://bugzilla.suse.com/show_bug.cgi?id=1213805#c24 Ivan Ivanov <ivan.ivanov(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Flags|needinfo?(john.vincent.xa@b | |p.renesas.com), | |needinfo?(oneukum(a)suse.com) | --- Comment #24 from Ivan Ivanov <ivan.ivanov(a)suse.com> --- Glad that this worked. Image was created using openSUSE-Tumbleweed-NET-aarch64.iso and only for testing that adding only reset-rzg2l-usbphy-ctrl module is enough to resolve the issue at hand. I don't know what you mean by "(x/6) not present". NET iso contain minimal set of application, but you can install anything that you need after this, by normal way "zypper in ..." Once new installation images tool is released you will have all ISO's, so you can test whatever you want. When this happens is beyond my knowledge. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213778] 15.5 upgrade: keyboard and mouse do not respond after resume from suspend to RAM
by bugzilla_noreply＠suse.com 03 Aug '23

03 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213778 Vadim Krevs <vkrevs(a)yahoo.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Flags|needinfo?(vkrevs(a)yahoo.com) | -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213493] BUG: kernel NULL pointer dereference
by bugzilla_noreply＠suse.com 03 Aug '23

03 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213493 https://bugzilla.suse.com/show_bug.cgi?id=1213493#c15 --- Comment #15 from Maintenance Automation <maint-coord+maintenance-robot(a)suse.de> --- SUSE-SU-2023:3180-1: An update that solves seven vulnerabilities, contains two features and has 26 fixes can now be installed. Category: security (important) Bug References: 1150305, 1193629, 1194869, 1207894, 1208788, 1211243, 1211867, 1212256, 1212301, 1212525, 1212846, 1212905, 1213059, 1213061, 1213205, 1213206, 1213226, 1213233, 1213245, 1213247, 1213252, 1213258, 1213259, 1213263, 1213264, 1213286, 1213311, 1213493, 1213523, 1213524, 1213533, 1213543, 1213705 CVE References: CVE-2023-20593, CVE-2023-2985, CVE-2023-3117, CVE-2023-31248, CVE-2023-3390, CVE-2023-35001, CVE-2023-3812 Jira References: PED-4718, PED-4758 Sources used: openSUSE Leap 15.5 (src): kernel-source-azure-5.14.21-150500.33.11.1, kernel-syms-azure-5.14.21-150500.33.11.1 Public Cloud Module 15-SP5 (src): kernel-source-azure-5.14.21-150500.33.11.1, kernel-syms-azure-5.14.21-150500.33.11.1 NOTE: This line indicates an update has been released for the listed product(s). At times this might be only a partial fix. If you have questions please reach out to maintenance coordination. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213778] 15.5 upgrade: keyboard and mouse do not respond after resume from suspend to RAM
by bugzilla_noreply＠suse.com 03 Aug '23

03 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213778 https://bugzilla.suse.com/show_bug.cgi?id=1213778#c14 --- Comment #14 from Vadim Krevs <vkrevs(a)yahoo.com> --- (In reply to Takashi Iwai from comment #13) > Thanks. Now we may try to figure out which kernel version started showing > the problem. > > There are a few kernel packages in my OBS repos, e.g. home:tiwai:kernel:6.3, > home:tiwai:kernel:6.2, ... Those are the last TW kernels of each kernel > version, and they also contain "backport" repo that are built for Leap > (instead of "standard" for TW). e.g. > > http://download.opensuse.org/repositories/home:/tiwai:/kernel:/6.3/backport/ > > Could you try one by one and verify which kernel works and which is broken? > This will be useful for the upstream. > > BTW, when you install multiple kernels, it's better to lock the main kernel > you're using with "zypper addlock" for avoiding it wiped out. Also, you can > increase the number of installable kernels by editing /etc/zypp/zypp.conf > and modifying the line to define "multiversion.kernels", e.g. > multiversion.kernels = latest,latest-1,latest-2,latest-3,running I used bisection reduce the number of kernels to test to find the working kernel version in the http://download.opensuse.org/repositories/home:/tiwai:/kernel:/{5.15-6.3}/b… repos. kernel-default-5.19.12-lp153.1.1.g95fa5b8.x86_64 - broken kernel-default-5.17.9-lp153.1.1.gc1eda89.x86_64 - broken kernel-default-5.16.16-lp153.1.1.gcdbc159.x86_64 - broken kernel-default-5.15.13-lp153.1.1.g01786ae.x86_64 - works as expected (just like the latest 15.4 kernel). -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213380] Black Screen Issue on openSUSE Tumbleweed ISO after BIOS with DP-HDMI Video Output
by bugzilla_noreply＠suse.com 03 Aug '23

03 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213380 https://bugzilla.suse.com/show_bug.cgi?id=1213380#c18 --- Comment #18 from Samuel Conway <samcon(a)protonmail.com> --- Created attachment 868623 --> https://bugzilla.suse.com/attachment.cgi?id=868623&action=edit dmesg when attaching to projector -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213380] Black Screen Issue on openSUSE Tumbleweed ISO after BIOS with DP-HDMI Video Output
by bugzilla_noreply＠suse.com 03 Aug '23

03 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213380 https://bugzilla.suse.com/show_bug.cgi?id=1213380#c17 --- Comment #17 from Samuel Conway <samcon(a)protonmail.com> --- (In reply to Samuel Conway from comment #16) > (In reply to Takashi Iwai from comment #14) > > So, now you could install the system with DP-DP? And on the running system, > > try to switch to DP-HDMI. Do you see the same problem? When you reconnect > > back to DP-DP, does it recover again? > > > > If all yes, please try like the following: > > - Boot with DP-DP, go up to GUI desktop > > - Enable the debugging of drm, run below as root > > echo 0x1e > /sys/module/drm/parameters/debug > > - Re-connect to DP-HDMI, and you'll see a buggy screen > > - Re-connect back to DP-DP, screen recovered > > - Save the output "dmesg" command, and attach the output to Bugzilla > > Did as as requested, had video output for both DP-DP and DP-HDMI. output of > dmesg is attached. I powered off device and took to room with projector, first booting with DP-DP monotor, successful video output, swapped to DP-HDMI for projector projector, but again no video output, just black screen. Rebooted again with DP-DP, still no output. Swapped again to DP-HDMI (still nothing) so I created a new dmesg export: dmesg-20230803-1 and attached it. Also swapped adapters since I have two, but no success. let me know if I can test anything else. regards -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213380] Black Screen Issue on openSUSE Tumbleweed ISO after BIOS with DP-HDMI Video Output
by bugzilla_noreply＠suse.com 03 Aug '23

03 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213380 https://bugzilla.suse.com/show_bug.cgi?id=1213380#c16 --- Comment #16 from Samuel Conway <samcon(a)protonmail.com> --- (In reply to Takashi Iwai from comment #14) > So, now you could install the system with DP-DP? And on the running system, > try to switch to DP-HDMI. Do you see the same problem? When you reconnect > back to DP-DP, does it recover again? > > If all yes, please try like the following: > - Boot with DP-DP, go up to GUI desktop > - Enable the debugging of drm, run below as root > echo 0x1e > /sys/module/drm/parameters/debug > - Re-connect to DP-HDMI, and you'll see a buggy screen > - Re-connect back to DP-DP, screen recovered > - Save the output "dmesg" command, and attach the output to Bugzilla Did as as requested, had video output for both DP-DP and DP-HDMI. output of dmesg is attached. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213380] Black Screen Issue on openSUSE Tumbleweed ISO after BIOS with DP-HDMI Video Output
by bugzilla_noreply＠suse.com 03 Aug '23

03 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213380 https://bugzilla.suse.com/show_bug.cgi?id=1213380#c15 --- Comment #15 from Samuel Conway <samcon(a)protonmail.com> --- Created attachment 868621 --> https://bugzilla.suse.com/attachment.cgi?id=868621&action=edit output of dmesg -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213805] OpenSUSE installation support for SMARC RZ/G2L platform
by bugzilla_noreply＠suse.com 03 Aug '23

03 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213805 https://bugzilla.suse.com/show_bug.cgi?id=1213805#c23 --- Comment #23 from John Vincent <john.vincent.xa(a)bp.renesas.com> --- Hi Ivan Thanks for the iso image with reset-rzg2l-usbphy-ctrl added. The usb driver is working ok now with this iso image. Thanks. But I see this iso image is smaller. The Loading installation system (x/6) not present with this iso installer. (But this works ok on a sd card installer when I get the iso image size about 3.5GB). Is it possible to get an iso image with the installation files present to test please. Best Regards John -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213438] "green screen" after kernel-update to vmlinuz-5.14.21-150500.55.7-default
by bugzilla_noreply＠suse.com 03 Aug '23

03 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213438 https://bugzilla.suse.com/show_bug.cgi?id=1213438#c37 --- Comment #37 from Günter Halt <guenter.halt(a)halt-hoenow.de> --- today (03.08.2023) any updates was present, kernel 5.14.21-150500.55.12-default too. Fine, it runs! I repeat my Thank you for all arrangers. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213569] Crash before login
by bugzilla_noreply＠suse.com 03 Aug '23

03 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213569 https://bugzilla.suse.com/show_bug.cgi?id=1213569#c6 Wilhelm Spickermann <wsp(a)spickermann-d.de> changed: What |Removed |Added ---------------------------------------------------------------------------- Resolution|--- |FIXED Flags|needinfo?(wsp@spickermann-d | |.de) | Status|NEW |RESOLVED --- Comment #6 from Wilhelm Spickermann <wsp(a)spickermann-d.de> --- kernel-default-5.14.21-150500.55.12.1.x86_64 from todays update works too -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213805] OpenSUSE installation support for SMARC RZ/G2L platform
by bugzilla_noreply＠suse.com 03 Aug '23

03 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213805 https://bugzilla.suse.com/show_bug.cgi?id=1213805#c22 --- Comment #22 from Ivan Ivanov <ivan.ivanov(a)suse.com> --- (In reply to John Vincent from comment #21) > https://status.opensuse.org/ It says: "Build Service" "Major Outage" -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213805] OpenSUSE installation support for SMARC RZ/G2L platform
by bugzilla_noreply＠suse.com 03 Aug '23

03 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213805 https://bugzilla.suse.com/show_bug.cgi?id=1213805#c21 --- Comment #21 from John Vincent <john.vincent.xa(a)bp.renesas.com> --- Hi Ivan Thanks for the link: https://build.opensuse.org/source/home:iivanov/Tumbleweed-SMARC-RZ-G2/renes… I'm getting the following error using this link: <status code="maintenance"> <summary>Sorry, api.opensuse.org is in maintenance mode at the moment. If the situation persists, check the opensuse-buildservice(a)opensuse.org mailinglist or https://status.opensuse.org/ or join us in channel #opensuse-buildservice at irc.opensuse.org.</summary> <details/> </status> The status says Maintenace on Thursday 8:00 to 10:00 CET. https://status.opensuse.org/ Should I wait or this issue due to my browser setting or any other issues. Thanks for your help. Best Regards John -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213805] OpenSUSE installation support for SMARC RZ/G2L platform
by bugzilla_noreply＠suse.com 03 Aug '23

03 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213805 https://bugzilla.suse.com/show_bug.cgi?id=1213805#c20 --- Comment #20 from Steffen Winterfeldt <snwint(a)suse.com> --- I've added the module: https://github.com/openSUSE/installation-images/pull/652 -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213805] OpenSUSE installation support for SMARC RZ/G2L platform
by bugzilla_noreply＠suse.com 03 Aug '23

03 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213805 https://bugzilla.suse.com/show_bug.cgi?id=1213805#c19 --- Comment #19 from Ivan Ivanov <ivan.ivanov(a)suse.com> --- John, please, could you test this [1] ISO image. It has reset-rzg2l-usbphy-ctrl inside installer initrd. This will show as whether it is just this module missing or there are more. [1] https://build.opensuse.org/source/home:iivanov/Tumbleweed-SMARC-RZ-G2/renes… -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213805] OpenSUSE installation support for SMARC RZ/G2L platform
by bugzilla_noreply＠suse.com 03 Aug '23

03 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213805 https://bugzilla.suse.com/show_bug.cgi?id=1213805#c18 --- Comment #18 from Ivan Ivanov <ivan.ivanov(a)suse.com> --- (In reply to John Vincent from comment #16) > Hi Ivan > > >> Github repo is publicly available. Everyone could submit pull request ;-) > > I was expecting this module to be added in the installer iso image inside > initrd so that I'm able to install OpenSUSE on Renesas RZ/G2L target boards. > > How will I add this module on the installer iso image? My understanding is that. 1) Module name have to be added to [1]. 2) Once pull request is accepted new installation-images package will be created. 3) Once new version of installation-images is released "build servers" will be updated and will start using this new package, which will produce ISO images and reset-rzg2l-usbphy-ctrl module will be inside initrd. 1] https://github.com/openSUSE/installation-images/blob/master/data/initrd/all… -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213805] OpenSUSE installation support for SMARC RZ/G2L platform
by bugzilla_noreply＠suse.com 03 Aug '23

03 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213805 https://bugzilla.suse.com/show_bug.cgi?id=1213805#c17 --- Comment #17 from Ivan Ivanov <ivan.ivanov(a)suse.com> --- (In reply to Steffen Winterfeldt from comment #15) > Given that some of these reset drivers are compiled in, some are modules - > would > it be beneficial to *other* hardware to have them all included or is just the > Renesas driver useful during installation? If I should take decision, I will be conservative and add only this module. They are so many other modules which are critical, but we can't be sure until someone ask for them. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213805] OpenSUSE installation support for SMARC RZ/G2L platform
by bugzilla_noreply＠suse.com 03 Aug '23

03 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213805 https://bugzilla.suse.com/show_bug.cgi?id=1213805#c16 --- Comment #16 from John Vincent <john.vincent.xa(a)bp.renesas.com> --- Hi Ivan >> Github repo is publicly available. Everyone could submit pull request ;-) I was expecting this module to be added in the installer iso image inside initrd so that I'm able to install OpenSUSE on Renesas RZ/G2L target boards. How will I add this module on the installer iso image? Best Regards John -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213805] OpenSUSE installation support for SMARC RZ/G2L platform
by bugzilla_noreply＠suse.com 03 Aug '23

03 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213805 https://bugzilla.suse.com/show_bug.cgi?id=1213805#c15 --- Comment #15 from Steffen Winterfeldt <snwint(a)suse.com> --- I am aware of that. My question was more general. Let me rephrase: Given that some of these reset drivers are compiled in, some are modules - would it be beneficial to *other* hardware to have them all included or is just the Renesas driver useful during installation? -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213805] OpenSUSE installation support for SMARC RZ/G2L platform
by bugzilla_noreply＠suse.com 03 Aug '23

03 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213805 https://bugzilla.suse.com/show_bug.cgi?id=1213805#c14 --- Comment #14 from Ivan Ivanov <ivan.ivanov(a)suse.com> --- (In reply to Steffen Winterfeldt from comment #12) > The question to me would be whether to add all modules from > kernel/drivers/reset/ > or just this Renesas module? > > Any insights? According bug description only reset-rzg2l-usbphy-ctrl is required. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213805] OpenSUSE installation support for SMARC RZ/G2L platform
by bugzilla_noreply＠suse.com 03 Aug '23

03 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213805 https://bugzilla.suse.com/show_bug.cgi?id=1213805#c13 --- Comment #13 from Ivan Ivanov <ivan.ivanov(a)suse.com> --- (In reply to John Vincent from comment #11) > Please update when this update will be available in the daily installer so > that we will test them and update you. Github repo is publicly available. Everyone could submit pull request ;-) -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213805] OpenSUSE installation support for SMARC RZ/G2L platform
by bugzilla_noreply＠suse.com 03 Aug '23

03 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213805 https://bugzilla.suse.com/show_bug.cgi?id=1213805#c12 --- Comment #12 from Steffen Winterfeldt <snwint(a)suse.com> --- The question to me would be whether to add all modules from kernel/drivers/reset/ or just this Renesas module? Any insights? -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213493] BUG: kernel NULL pointer dereference
by bugzilla_noreply＠suse.com 03 Aug '23

03 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213493 https://bugzilla.suse.com/show_bug.cgi?id=1213493#c14 --- Comment #14 from Maintenance Automation <maint-coord+maintenance-robot(a)suse.de> --- SUSE-SU-2023:3172-1: An update that solves seven vulnerabilities, contains two features and has 25 fixes can now be installed. Category: security (important) Bug References: 1150305, 1193629, 1194869, 1207894, 1208788, 1211243, 1211867, 1212256, 1212301, 1212525, 1212846, 1212905, 1213059, 1213061, 1213205, 1213206, 1213226, 1213233, 1213245, 1213247, 1213252, 1213258, 1213259, 1213263, 1213264, 1213286, 1213493, 1213523, 1213524, 1213533, 1213543, 1213705 CVE References: CVE-2023-20593, CVE-2023-2985, CVE-2023-3117, CVE-2023-31248, CVE-2023-3390, CVE-2023-35001, CVE-2023-3812 Jira References: PED-4718, PED-4758 Sources used: openSUSE Leap 15.5 (src): kernel-obs-qa-5.14.21-150500.55.12.1, kernel-source-5.14.21-150500.55.12.1, kernel-obs-build-5.14.21-150500.55.12.1, kernel-livepatch-SLE15-SP5_Update_2-1-150500.11.3.2, kernel-default-base-5.14.21-150500.55.12.1.150500.6.4.2, kernel-syms-5.14.21-150500.55.12.1 Basesystem Module 15-SP5 (src): kernel-source-5.14.21-150500.55.12.1, kernel-default-base-5.14.21-150500.55.12.1.150500.6.4.2 Development Tools Module 15-SP5 (src): kernel-obs-build-5.14.21-150500.55.12.1, kernel-source-5.14.21-150500.55.12.1, kernel-syms-5.14.21-150500.55.12.1 SUSE Linux Enterprise Live Patching 15-SP5 (src): kernel-livepatch-SLE15-SP5_Update_2-1-150500.11.3.2 NOTE: This line indicates an update has been released for the listed product(s). At times this might be only a partial fix. If you have questions please reach out to maintenance coordination. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213805] OpenSUSE installation support for SMARC RZ/G2L platform
by bugzilla_noreply＠suse.com 03 Aug '23

03 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213805 https://bugzilla.suse.com/show_bug.cgi?id=1213805#c11 --- Comment #11 from John Vincent <john.vincent.xa(a)bp.renesas.com> --- Hi Ivan Thanks for your reply. >> It looks like what could fix installation issue in this case is to add reset-rzg2l-usbphy-ctrl module to installer initrd. Yes. I agree. Adding "reset-rzg2l-usbphy-ctrl" module to installer initrd will fix this issue. Please update when this update will be available in the daily installer so that we will test them and update you. Best Regards John -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213805] OpenSUSE installation support for SMARC RZ/G2L platform
by bugzilla_noreply＠suse.com 03 Aug '23

03 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213805 https://bugzilla.suse.com/show_bug.cgi?id=1213805#c10 --- Comment #10 from Ivan Ivanov <ivan.ivanov(a)suse.com> --- While making this module build-in perhaps will fix the issue, but we prefer to keep as much as possible drivers as loadable modules. Think of kernel image size. It looks like what could fix installation issue in this case is to add reset-rzg2l-usbphy-ctrl module to installer initrd. What is put in initrd for openSUSE installation images is specified here [1]. [1] https://github.com/openSUSE/installation-images/blob/master/data/initrd/all… -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213914] Possible BUG with the last KERNEL-FIRMWARE update (kernel-firmware-all-20230724-150500.3.3.1.noarch.rpm)
by bugzilla_noreply＠suse.com 03 Aug '23

03 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213914 https://bugzilla.suse.com/show_bug.cgi?id=1213914#c1 Takashi Iwai <tiwai(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |infosarzo(a)gmail.com, | |tiwai(a)suse.com Flags| |needinfo?(infosarzo(a)gmail.c | |om) --- Comment #1 from Takashi Iwai <tiwai(a)suse.com> --- Could you test with the kernel in OBS Kernel:SLE15-SP5 repo? http://download.opensuse.org/repositories/Kernel:/SLE15-SP5/pool/ Test with and without the latest kernel-firmware update. If this kernel also doesn't work with the latest firmware, please boot with "firmware_class.dyndbg=+p" boot option, and get the dmesg output. If you can't get it after the boot, reboot with "nomodeset" boot option (to disable the native graphics), and extract the previous kernel boot log. You can downgrade to the older kernel-firmware packages there to recover, too. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213617] kernel 6.4.x power management issues on kaby lake CPU
by bugzilla_noreply＠suse.com 03 Aug '23

03 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213617 https://bugzilla.suse.com/show_bug.cgi?id=1213617#c7 --- Comment #7 from Michal Hlavac <miso(a)hlavki.eu> --- Yes, upstream bug is https://bugzilla.kernel.org/show_bug.cgi?id=217705 -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213778] 15.5 upgrade: keyboard and mouse do not respond after resume from suspend to RAM
by bugzilla_noreply＠suse.com 03 Aug '23

03 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213778 https://bugzilla.suse.com/show_bug.cgi?id=1213778#c13 Takashi Iwai <tiwai(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Flags| |needinfo?(vkrevs(a)yahoo.com) --- Comment #13 from Takashi Iwai <tiwai(a)suse.com> --- Thanks. Now we may try to figure out which kernel version started showing the problem. There are a few kernel packages in my OBS repos, e.g. home:tiwai:kernel:6.3, home:tiwai:kernel:6.2, ... Those are the last TW kernels of each kernel version, and they also contain "backport" repo that are built for Leap (instead of "standard" for TW). e.g. http://download.opensuse.org/repositories/home:/tiwai:/kernel:/6.3/backport/ Could you try one by one and verify which kernel works and which is broken? This will be useful for the upstream. BTW, when you install multiple kernels, it's better to lock the main kernel you're using with "zypper addlock" for avoiding it wiped out. Also, you can increase the number of installable kernels by editing /etc/zypp/zypp.conf and modifying the line to define "multiversion.kernels", e.g. multiversion.kernels = latest,latest-1,latest-2,latest-3,running -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213617] kernel 6.4.x power management issues on kaby lake CPU
by bugzilla_noreply＠suse.com 03 Aug '23

03 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213617 https://bugzilla.suse.com/show_bug.cgi?id=1213617#c6 --- Comment #6 from Takashi Iwai <tiwai(a)suse.com> --- Thanks, it's clearer now. Have you already reported it to the upstream? You can use bugzilla.kernel.org, for example. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213153] x11vnc slow and generates mouse errors after kernel 6.3.7 - Debian reports fix for x11vnc.
by bugzilla_noreply＠suse.com 03 Aug '23

03 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213153 https://bugzilla.suse.com/show_bug.cgi?id=1213153#c5 --- Comment #5 from Stefan Dirsch <sndirsch(a)suse.com> --- (In reply to Larry Rainey from comment #4) > https://archlinux.org/packages/extra/x86_64/x11vnc/ Thanks. Seems they apply 3 patches on top of 0.9.16 https://gitlab.archlinux.org/archlinux/packaging/packages/x11vnc/-/blob/mai… Mabye this would also fix it for us ... -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213778] 15.5 upgrade: keyboard and mouse do not respond after resume from suspend to RAM
by bugzilla_noreply＠suse.com 02 Aug '23

02 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213778 https://bugzilla.suse.com/show_bug.cgi?id=1213778#c12 --- Comment #12 from Vadim Krevs <vkrevs(a)yahoo.com> --- (In reply to Takashi Iwai from comment #11) > If the recent upstream kernel also doesn't work, at best, we should report > it to the upstream. Care to do that? https://bugzilla.kernel.org/show_bug.cgi?id=217752 -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213617] kernel 6.4.x power management issues on kaby lake CPU
by bugzilla_noreply＠suse.com 02 Aug '23

02 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213617 Michal Hlavac <miso(a)hlavki.eu> changed: What |Removed |Added ---------------------------------------------------------------------------- Flags|needinfo?(miso(a)hlavki.eu) | -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213617] kernel 6.4.x power management issues on kaby lake CPU
by bugzilla_noreply＠suse.com 02 Aug '23

02 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213617 https://bugzilla.suse.com/show_bug.cgi?id=1213617#c5 --- Comment #5 from Michal Hlavac <miso(a)hlavki.eu> --- Thanks Takashi for the history repos link. I didn't know they existed. installed packages: sudo zypper in --oldpackage kernel-default-6.3.9-1.1 bbswitch-kmp-default-0.8_k6.3.9_1-13.31 bbswitch-0.8-13.31 cat /proc/acpi/bbswitch OFF KDE plasma started when I booted to 6.3.9 with a disconnected power adapter. Only the text console started when I booted to 6.4.6 with a disconnected power adapter. So I think I can confirm that the 6.3.x kernel works as expected. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213153] x11vnc slow and generates mouse errors after kernel 6.3.7 - Debian reports fix for x11vnc.
by bugzilla_noreply＠suse.com 02 Aug '23

02 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213153 https://bugzilla.suse.com/show_bug.cgi?id=1213153#c4 --- Comment #4 from Larry Rainey <llrainey15(a)gmail.com> --- https://archlinux.org/packages/extra/x86_64/x11vnc/ -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213153] x11vnc slow and generates mouse errors after kernel 6.3.7 - Debian reports fix for x11vnc.
by bugzilla_noreply＠suse.com 02 Aug '23

02 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213153 https://bugzilla.suse.com/show_bug.cgi?id=1213153#c3 Larry Rainey <llrainey15(a)gmail.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Flags|needinfo?(llrainey15@gmail. | |com) | --- Comment #3 from Larry Rainey <llrainey15(a)gmail.com> --- Is it X11? Some pieces in Tumbleweed are newer. Maybe this needs to go to X11 support? here is Tumbleweed : i+ | x11 | pattern | 20200505-41.1 | x86_64 | openSUSE-Tumbleweed-Oss i | x11-tools | package | 0.1-213.2 | noarch | openSUSE-Tumbleweed-Oss i+ | x11_yast | pattern | 20220411-1.4 | x86_64 | openSUSE-Tumbleweed-Oss i+ | x11perf | package | 1.6.2-1.3 | x86_64 | openSUSE-Tumbleweed-Oss i+ | x11vnc | package | 0.9.16-2.16 | x86_64 | openSUSE-Tumbleweed-Oss i | xorg-x11-driver-video | package | 7.6_1-19.10 | x86_64 | openSUSE-Tumbleweed-Oss i | xorg-x11-essentials | package | 7.6_1-16.18 | noarch | openSUSE-Tumbleweed-Oss i | xorg-x11-fonts | package | 7.6-45.1 | noarch | openSUSE-Tumbleweed-Oss i | xorg-x11-fonts-converted | package | 7.6-45.3 | noarch | openSUSE-Tumbleweed-Oss i | xorg-x11-fonts-core | package | 7.6-45.1 | noarch | openSUSE-Tumbleweed-Oss i | xorg-x11-fonts-legacy | package | 7.6-45.1 | noarch | openSUSE-Tumbleweed-Oss i | xorg-x11-libX11-ccache | package | 7.6-22.6 | x86_64 | openSUSE-Tumbleweed-Oss i | xorg-x11-server | package | 21.1.8-1.4 | x86_64 | openSUSE-Tumbleweed-Oss i | xorg-x11-server-extra | package | 21.1.8-1.4 | x86_64 | openSUSE-Tumbleweed-Oss i | xorg-x11-server-Xvfb | package | 21.1.8-1.4 | x86_64 | openSUSE-Tumbleweed-Oss i | xorg-x11-Xvnc | package | 1.13.1-3.3 | x86_64 | openSUSE-Tumbleweed-Oss i | xorg-x11-Xvnc-module | package | 1.13.1-3.3 | x86_64 | openSUSE-Tumbleweed-Oss and here is Leap: i+ | x11 | pattern | 20200505-41.1 | x86_64 | openSUSE-Tumbleweed-Oss i | x11-tools | package | 0.1-213.2 | noarch | openSUSE-Tumbleweed-Oss i+ | x11_yast | pattern | 20220411-1.4 | x86_64 | openSUSE-Tumbleweed-Oss i+ | x11perf | package | 1.6.2-1.3 | x86_64 | openSUSE-Tumbleweed-Oss i+ | x11vnc | package | 0.9.16-2.16 | x86_64 | openSUSE-Tumbleweed-Oss i | xorg-x11-driver-video | package | 7.6_1-19.10 | x86_64 | openSUSE-Tumbleweed-Oss i | xorg-x11-essentials | package | 7.6_1-16.18 | noarch | openSUSE-Tumbleweed-Oss i | xorg-x11-fonts | package | 7.6-45.1 | noarch | openSUSE-Tumbleweed-Oss i | xorg-x11-fonts-converted | package | 7.6-45.3 | noarch | openSUSE-Tumbleweed-Oss i | xorg-x11-fonts-core | package | 7.6-45.1 | noarch | openSUSE-Tumbleweed-Oss i | xorg-x11-fonts-legacy | package | 7.6-45.1 | noarch | openSUSE-Tumbleweed-Oss i | xorg-x11-libX11-ccache | package | 7.6-22.6 | x86_64 | openSUSE-Tumbleweed-Oss i | xorg-x11-server | package | 21.1.8-1.4 | x86_64 | openSUSE-Tumbleweed-Oss i | xorg-x11-server-extra | package | 21.1.8-1.4 | x86_64 | openSUSE-Tumbleweed-Oss i | xorg-x11-server-Xvfb | package | 21.1.8-1.4 | x86_64 | openSUSE-Tumbleweed-Oss i | xorg-x11-Xvnc | package | 1.13.1-3.3 | x86_64 | openSUSE-Tumbleweed-Oss i | xorg-x11-Xvnc-module | package | 1.13.1-3.3 | x86_64 | openSUSE-Tumbleweed-Oss -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1213153] x11vnc slow and generates mouse errors after kernel 6.3.7 - Debian reports fix for x11vnc.
by bugzilla_noreply＠suse.com 02 Aug '23

02 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1213153 https://bugzilla.suse.com/show_bug.cgi?id=1213153#c2 --- Comment #2 from Larry Rainey <llrainey15(a)gmail.com> --- It only happens in Tumbleweed. Same version of x11vnc in Leap 15.5. Desktop is MATE but happens in XFCE as well. I think it is a Kernel related issue as on the vmware but that turned out to be a vmware issue. Is is something that changed in X11? https://forums.opensuse.org/t/some-opensuse-update-made-it-very-slow-in-vmw… In trying to isolate what causes the issue - I know that the mouse generates these error in the x11vnc log file: the xxxxxx entries is where I pressed enter 6 times - no codes for the keystokes - just the mouse movements I think the positive are when I switched virtual screens. *** fb_push ublen NOT ZERO: -184548353 *** fb_push ublen NOT ZERO: -832175933 *** fb_push ublen NOT ZERO: -832175933 *** fb_push ublen NOT ZERO: -1244532993 *** fb_push ublen NOT ZERO: 720717 *** fb_push ublen NOT ZERO: 7471043 *** fb_push ublen NOT ZERO: 7143267 *** fb_push ublen NOT ZERO: -1308611073 *** fb_push ublen NOT ZERO: -1308611073 *** fb_push ublen NOT ZERO: -1912578561 *** fb_push ublen NOT ZERO: -1769985 *** fb_push ublen NOT ZERO: -1769985 xxxxxx *** fb_push ublen NOT ZERO: -2046756378 *** fb_push ublen NOT ZERO: -2046756378 *** fb_push ublen NOT ZERO: -2046756378 *** fb_push ublen NOT ZERO: -2046756378 xxxxxx *** fb_push ublen NOT ZERO: -2046756378 *** fb_push ublen NOT ZERO: -2046756378 *** fb_push ublen NOT ZERO: -2046756378 *** fb_push ublen NOT ZERO: -2046756378 02/08/2023 09:29:16 idle keyboard: turning X autorepeat back on. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1212277] System unable to boot after upgrade from 15.4 to leap 15.5
by bugzilla_noreply＠suse.com 02 Aug '23

02 Aug '23

https://bugzilla.suse.com/show_bug.cgi?id=1212277 https://bugzilla.suse.com/show_bug.cgi?id=1212277#c12 Dominik Heidler <dheidler(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Resolution|--- |FIXED --- Comment #12 from Dominik Heidler <dheidler(a)suse.com> --- Meanwhile fixed in current 15.5. -- You are receiving this mail because: You are the assignee for the bug.

1 0