December 2022 - openSUSE Kernel Bugs - openSUSE Mailing Lists

[Bug 1202950] radeon [Radeon 6450] Blank screen (Kernel driver regression on Leap 15.4)
by bugzilla_noreply＠suse.com 08 Dec '22

08 Dec '22

http://bugzilla.opensuse.org/show_bug.cgi?id=1202950 http://bugzilla.opensuse.org/show_bug.cgi?id=1202950#c24 Takashi Iwai <tiwai(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |tiwai(a)suse.com Flags|needinfo?(kernel-bugs@opens |needinfo?(opensuse@jackbone |use.org) |t.eu) --- Comment #24 from Takashi Iwai <tiwai(a)suse.com> --- Could you verify whether the problem still persists with the latest Leap 15.4 update kernel (after removing the blacklist or nomodeset workaround)? If the problem persists, please give the dmesg output from the bad working state (I suppose you can still access via remote login?). -- You are receiving this mail because: You are on the CC list for the bug. You are the assignee for the bug.

1 0

[Bug 1203519] New: floating shutdown problem on pinebook pro
by bugzilla_noreply＠suse.com 08 Dec '22

08 Dec '22

http://bugzilla.opensuse.org/show_bug.cgi?id=1203519 Bug ID: 1203519 Summary: floating shutdown problem on pinebook pro Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: openSUSE Tumbleweed Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: werwolf131313(a)gmail.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- intermittent shutdown problem on pinebook pro, the problem is expressed as follows: after the laptop is turned off (it doesn��t matter by the button in the menu or via sudo systemctl shutdown), a regular shutdown occurs, the service stop log is visible and everything is as it should be, BUT, after the screen goes blank, the board remains on. this can be checked if you try to turn it on, pressing the button does not work. only a long press of the power key (to completely turn off) for 7-10 seconds, and a second press (to turn it on) allows you to turn on the pinebook. the problem is not observed in other distributions (tried on manjaro, armbian, gentoo) and is specific to opensuse. in my case, the installation differs from the typical one in that the operating system is installed on a microsd card (due to the death of emmc), can this affect? but in other distributions, even installed on the same microsd card, the problem is not observed. I'm using opensuse tumbleweed installed from the openSUSE-Tumbleweed-ARM-KDE-pinebookpro.aarch64.raw.xz image. at the moment there are all the latest updates, but the problem has existed for quite a long time. -- You are receiving this mail because: You are the assignee for the bug.

1 1

needinfo requested: [Bug 1202950] radeon [Radeon 6450] Blank screen (Kernel driver regression on Leap 15.4)
by bugzilla_noreply＠suse.com 07 Dec '22

07 Dec '22

Jacobs <opensuse(a)jackbonet.eu> has asked openSUSE Kernel Bugs <kernel-bugs(a)opensuse.org> for needinfo: Bug 1202950: radeon [Radeon 6450] Blank screen (Kernel driver regression on Leap 15.4) http://bugzilla.opensuse.org/show_bug.cgi?id=1202950 --- Comment #23 from Jacobs <opensuse(a)jackbonet.eu> --- Hi there, is there any progress with this issue? Any ideas how to solve the problem or how to be able to perform the upgrade? Thanks.

1 0

[Bug 1202950] radeon [Radeon 6450] Blank screen (Kernel driver regression on Leap 15.4)
by bugzilla_noreply＠suse.com 07 Dec '22

07 Dec '22

http://bugzilla.opensuse.org/show_bug.cgi?id=1202950 http://bugzilla.opensuse.org/show_bug.cgi?id=1202950#c23 Jacobs <opensuse(a)jackbonet.eu> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |kernel-bugs(a)opensuse.org Flags| |needinfo?(kernel-bugs@opens | |use.org) --- Comment #23 from Jacobs <opensuse(a)jackbonet.eu> --- Hi there, is there any progress with this issue? Any ideas how to solve the problem or how to be able to perform the upgrade? Thanks. -- You are receiving this mail because: You are on the CC list for the bug. You are the assignee for the bug.

1 0

[Bug 1205891] System freeze
by bugzilla_noreply＠suse.com 07 Dec '22

07 Dec '22

https://bugzilla.suse.com/show_bug.cgi?id=1205891 https://bugzilla.suse.com/show_bug.cgi?id=1205891#c9 --- Comment #9 from Frank Kr�ger <fkrueger(a)mailbox.org> --- (In reply to Branislav Klocok from comment #7) > Today there was an upgrade to 252.2-2.1. To me it seems the problem > disappeared. Can anyone confirm? For me today's update made it worse, black screen after suspend and hibernate, switching TTY doesn't have any effect. Downgrading to systemd-252.2-1.1.x86_64 and performing a cold boot solved the issue, as described in comment 5. This bug is really weird, I cannot find any hints in the logs. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1205891] System freeze
by bugzilla_noreply＠suse.com 07 Dec '22

07 Dec '22

https://bugzilla.suse.com/show_bug.cgi?id=1205891 https://bugzilla.suse.com/show_bug.cgi?id=1205891#c8 --- Comment #8 from Ailin Nemui <ailin.nemui(a)gmail.com> --- did you wait 2 hours after suspend to check if the issue appears? -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1205891] System freeze
by bugzilla_noreply＠suse.com 07 Dec '22

07 Dec '22

https://bugzilla.suse.com/show_bug.cgi?id=1205891 https://bugzilla.suse.com/show_bug.cgi?id=1205891#c7 --- Comment #7 from Branislav Klocok <branislav.klocok(a)orava.sk> --- Today there was an upgrade to 252.2-2.1. To me it seems the problem disappeared. Can anyone confirm? -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1193599] New: ntel_dp_detect [i915]] *ERROR* LSPCON init failed on port D
by bugzilla_noreply＠suse.com 07 Dec '22

07 Dec '22

http://bugzilla.opensuse.org/show_bug.cgi?id=1193599 Bug ID: 1193599 Summary: ntel_dp_detect [i915]] *ERROR* LSPCON init failed on port D Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.4 Hardware: x86-64 OS: openSUSE Leap 15.4 Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: opendreas(a)gmail.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- The following errors appear at boot broken atomic modeset userspace detected, disabling atomic [drm spcon_init [i915]] *ERROR* Failed to probe lspcon [drm ntel_dp_detect [i915]] *ERROR* LSPCON init failed on port D [drm spcon_init [i915]] *ERROR* Failed to probe lspcon [drm ntel_dp_detect [i915]] *ERROR* LSPCON init failed on port D [drm spcon_init [i915]] *ERROR* Failed to probe lspcon [drm ntel_dp_detect [i915]] *ERROR* LSPCON init failed on port D [drm spcon_init [i915]] *ERROR* Failed to probe lspcon [drm ntel_dp_detect [i915]] *ERROR* LSPCON init failed on port D Full log https://paste.opensuse.org/83436185 Hardware Dell Precision 7530 CPU: Intel Xeon E-2186M GPU: Intel P630 / Nvidia Quadro P3200 -- You are receiving this mail because: You are the assignee for the bug.

1 33

[Bug 1206172] New: mhvtl fails to build on Leap 15.5 error: too few arguments to function 'mhvtl_queuecommand_lck'
by bugzilla_noreply＠suse.com 07 Dec '22

07 Dec '22

http://bugzilla.opensuse.org/show_bug.cgi?id=1206172 Bug ID: 1206172 Summary: mhvtl fails to build on Leap 15.5 error: too few arguments to function 'mhvtl_queuecommand_lck' Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.5 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: lubos.kocman(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- https://build.opensuse.org/package/live_build_log/openSUSE:Leap:15.5/mhvtl/… mhvtl fails to build on Leap 15.5, based on the SCSI nature it seem to be related to Bug 1206169 Could you please look a it? 66s] make: Entering directory '/usr/src/linux-5.14.21-150500.34-obj/x86_64/default' [ 67s] CC [M] /home/abuild/rpmbuild/BUILD/mhvtl-1.64_release+835.6beb0aa01437/obj/default/mhvtl.o [ 68s] In file included from /home/abuild/rpmbuild/BUILD/mhvtl-1.64_release+835.6beb0aa01437/obj/default/mhvtl.c:63:0: [ 68s] /home/abuild/rpmbuild/BUILD/mhvtl-1.64_release+835.6beb0aa01437/obj/default/mhvtl.c: In function 'mhvtl_queuecommand': [ 68s] /home/abuild/rpmbuild/BUILD/mhvtl-1.64_release+835.6beb0aa01437/obj/default/mhvtl.c:300:22: error: too few arguments to function 'mhvtl_queuecommand_lck' [ 68s] static DEF_SCSI_QCMD(mhvtl_queuecommand) [ 68s] ^ [ 68s] /usr/src/linux-5.14.21-150500.34/include/scsi/scsi_host.h:516:8: note: in definition of macro 'DEF_SCSI_QCMD' [ 68s] rc = func_name##_lck(cmd); \ [ 68s] ^~~~~~~~~ [ 68s] /home/abuild/rpmbuild/BUILD/mhvtl-1.64_release+835.6beb0aa01437/obj/default/mhvtl.c:278:12: note: declared here [ 68s] static int mhvtl_queuecommand_lck(struct scsi_cmnd * [ 68s] ^~~~~~~~~~~~~~~~~~~~~~ [ 68s] make[2]: *** [/usr/src/linux-5.14.21-150500.34/scripts/Makefile.build:272: /home/abuild/rpmbuild/BUILD/mhvtl-1.64_release+835.6beb0aa01437/obj/default/mhvtl.o] Error 1 [ 68s] make[1]: *** [/usr/src/linux-5.14.21-150500.34/Makefile:1891: /home/abuild/rpmbuild/BUILD/mhvtl-1.64_release+835.6beb0aa01437/obj/default] Error 2 [ 68s] make: *** [../../../linux-5.14.21-150500.34/Makefile:220: __sub-make] Error 2 [ 68s] make: Leaving directory '/usr/src/linux-5.14.21-150500.34-obj/x86_64/default' [ 68s] error: Bad exit status from /var/tmp/rpm-tmp.xY7F0m (%build) [ 68s] -- You are receiving this mail because: You are the assignee for the bug.

1 1

[Bug 1206169] New: mhvtl fails to build on Leap 15.5 error: 'struct scsi_cmnd' has no member named 'scsi_done'
by bugzilla_noreply＠suse.com 07 Dec '22

07 Dec '22

http://bugzilla.opensuse.org/show_bug.cgi?id=1206169 Bug ID: 1206169 Summary: mhvtl fails to build on Leap 15.5 error: 'struct scsi_cmnd' has no member named 'scsi_done' Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.5 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: lubos.kocman(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Hello this particular kmp fails to buidl on Leap 15.5 Could you please look into it? https://build.opensuse.org/package/live_build_log/openSUSE:Leap:15.5/vhba-k… 48s] make[1]: Entering directory '/usr/src/linux-5.14.21-150500.34-obj/x86_64/default' [ 50s] CC [M] /home/abuild/rpmbuild/BUILD/obj-default/vhba.o [ 51s] /home/abuild/rpmbuild/BUILD/obj-default/vhba.c: In function 'vhba_queuecommand': [ 51s] /home/abuild/rpmbuild/BUILD/obj-default/vhba.c:492:12: error: 'struct scsi_cmnd' has no member named 'scsi_done' [ 51s] cmd->scsi_done(cmd); [ 51s] ^~ [ 51s] /home/abuild/rpmbuild/BUILD/obj-default/vhba.c: In function 'vhba_ctl_write': [ 51s] /home/abuild/rpmbuild/BUILD/obj-default/vhba.c:827:18: error: 'struct scsi_cmnd' has no member named 'scsi_done' [ 51s] vcmd->cmd->scsi_done(vcmd->cmd); [ 51s] ^~ [ 51s] /home/abuild/rpmbuild/BUILD/obj-default/vhba.c: In function 'vhba_ctl_release': [ 51s] /home/abuild/rpmbuild/BUILD/obj-default/vhba.c:953:18: error: 'struct scsi_cmnd' has no member named 'scsi_done' [ 51s] vcmd->cmd->scsi_done(vcmd->cmd); [ 51s] ^~ [ 51s] make[3]: *** [/usr/src/linux-5.14.21-150500.34/scripts/Makefile.build:272: /home/abuild/rpmbuild/BUILD/obj-default/vhba.o] Error 1 [ 51s] make[2]: *** [/usr/src/linux-5.14.21-150500.34/Makefile:1891: /home/abuild/rpmbuild/BUILD/obj-default] Error 2 [ 51s] make[1]: *** [../../../linux-5.14.21-150500.34/Makefile:220: __sub-make] Error 2 [ 51s] make[1]: Leaving directory '/usr/src/linux-5.14.21-150500.34-obj/x86_64/default' [ 51s] make: *** [Makefile:14: modules] Error 2 [ 51s] error: Bad exit status from /var/tmp/rpm-tmp.s00T1A (%build) -- You are receiving this mail because: You are the assignee for the bug.

1 1