November 2020 - openSUSE Kernel Bugs - openSUSE Mailing Lists

[kernel-bugs] [Bug 1178463] New: Flood of "usb usb{2,6}-port1: Cannot enable." messages
by bugzilla_noreply＠suse.com 27 Jan '23

27 Jan '23

https://bugzilla.suse.com/show_bug.cgi?id=1178463 Bug ID: 1178463 Summary: Flood of "usb usb{2,6}-port1: Cannot enable." messages Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: lmb(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created attachment 843325 --> https://bugzilla.suse.com/attachment.cgi?id=843325&action=edit lsusb -vv With the 5.10.0rc2 kernel from Kernel:HEAD, I'm experiencing a flood of: ... [ 372.567942] usb usb2-port1: Cannot enable. Maybe the USB cable is bad? [ 374.686509] usb usb6-port1: Cannot enable. Maybe the USB cable is bad? [ 377.026495] usb usb2-port1: Cannot enable. Maybe the USB cable is bad? [ 378.986503] usb usb6-port1: Cannot enable. Maybe the USB cable is bad? [ 381.446415] usb usb2-port1: Cannot enable. Maybe the USB cable is bad? [ 383.290504] usb usb6-port1: Cannot enable. Maybe the USB cable is bad? [ 385.918496] usb usb2-port1: Cannot enable. Maybe the USB cable is bad? [ 387.586478] usb usb6-port1: Cannot enable. Maybe the USB cable is bad? [ 390.386475] usb usb2-port1: Cannot enable. Maybe the USB cable is bad? [ 391.894454] usb usb6-port1: Cannot enable. Maybe the USB cable is bad? ... The XPS 13 is connected to a Belkin Thunberbird dock. As far as I can tell, except for these messages, all USB connected peripherals (keyboard, mouse, webcam) are working. Attaching lsusb -vv and dmesg output. -- You are receiving this mail because: You are the assignee for the bug.

1 7

[kernel-bugs] [Bug 1176026] New: bond interface should not invent mac address by default
by bugzilla_noreply＠suse.com 25 Jan '23

25 Jan '23

https://bugzilla.suse.com/show_bug.cgi?id=1176026 Bug ID: 1176026 Summary: bond interface should not invent mac address by default Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: ro(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- since 5.8.4 (unsure about last digit): when setting up a bond if kernel chooses a random mac removing and readding the slave gets back to the used behaviour: obs-arm-1:~ # modprobe bonding 3: enP2p1s0v1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000 link/ether 1c:1b:0d:60:ee:8b brd ff:ff:ff:ff:ff:ff 7: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 9e:29:55:da:aa:0e brd ff:ff:ff:ff:ff:ff obs-arm-1:~ # echo +enP2p1s0v1 > /sys/class/net/bond0/bonding/slaves 7: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 9e:29:55:da:aa:0e brd ff:ff:ff:ff:ff:ff obs-arm-1:~ # echo -enP2p1s0v1 > /sys/class/net/bond0/bonding/slaves obs-arm-1:~ # echo +enP2p1s0v1 > /sys/class/net/bond0/bonding/slaves 7: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 1c:1b:0d:60:ee:8b brd ff:ff:ff:ff:ff:ff -- You are receiving this mail because: You are the assignee for the bug.

1 2

[kernel-bugs] [Bug 1173891] New: BUG: kernel NULL pointer dereference, address: 0000000d during install on i686 notebook
by bugzilla_noreply＠suse.com 20 Jan '23

20 Jan '23

https://bugzilla.suse.com/show_bug.cgi?id=1173891 Bug ID: 1173891 Summary: BUG: kernel NULL pointer dereference, address: 0000000d during install on i686 notebook Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: i686 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: richard(a)nod.at QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- While installing Tumbleweed (openSUSE-Tumbleweed-NET-i586-Snapshot20200701-Media.iso) on my old notbook I got the following crash: ---cut--- [ 3448.675690] BUG: kernel NULL pointer dereference, address: 0000000d [ 3448.675713] #PF: supervisor read access in kernel mode [ 3448.675723] #PF: error_code(0x0000) - not-present page [ 3448.675733] *pde = 00000000 [ 3448.675746] Oops: 0000 [#1] SMP [ 3448.675759] CPU: 1 PID: 13684 Comm: rpm Not tainted 5.7.5-1-default #1 openSUSE Tumbleweed (unreleased) [ 3448.675771] Hardware name: Dell Inc. Latitude 2100 /0W785N, BIOS A01 06/02/2009 [ 3448.675792] EIP: __vfs_write+0x83/0x200 [ 3448.675805] Code: 00 00 8b 73 24 89 55 b0 89 4d b4 89 f0 89 75 ac c1 e8 09 83 e0 02 81 e6 00 40 00 00 0f 85 fd 00 00 00 8b b3 a4 00 00 00 8b 36 <f6> 46 0d 20 0f 85 eb 00 00 00 f7 45 ac 00 10 00 00 75 15 8b b3 a4 [ 3448.675825] EAX: 00000000 EBX: ddb3a180 ECX: 00005e44 EDX: bfd3af6c [ 3448.675836] ESI: 00000000 EDI: c28fdf7c EBP: c28fdf4c ESP: c28fdef4 [ 3448.675848] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010246 [ 3448.675859] CR0: 80050033 CR2: 0000000d CR3: 32744000 CR4: 000006d0 [ 3448.675868] Call Trace: [ 3448.675885] ? apparmor_file_permission+0x56/0x160 [ 3448.675902] ? security_file_permission+0x2c/0x150 [ 3448.675916] ? rw_verify_area+0x44/0x90 [ 3448.675928] vfs_write+0x9b/0x1c0 [ 3448.675942] ? ktime_get_real_ts64+0x4f/0x150 [ 3448.675955] ksys_write+0x58/0xd0 [ 3448.675968] __ia32_sys_write+0x15/0x20 [ 3448.675982] do_int80_syscall_32+0x41/0x120 [ 3448.675996] entry_INT80_32+0xfc/0xfc [ 3448.676007] EIP: 0xb7d71522 [ 3448.676018] Code: 90 66 90 66 90 66 90 90 56 53 83 ec 14 8b 5c 24 20 8b 4c 24 24 8b 54 24 28 65 a1 0c 00 00 00 85 c0 75 1d b8 04 00 00 00 cd 80 <89> c3 3d 00 f0 ff ff 77 4d 83 c4 14 89 d8 5b 5e c3 8d 74 26 00 90 [ 3448.676039] EAX: ffffffda EBX: 00000009 ECX: bfd3af6c EDX: 00005e44 [ 3448.676050] ESI: 02486bf0 EDI: b7e5ba90 EBP: 02481c50 ESP: bfd3aea0 [ 3448.676061] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000246 [ 3448.676077] ? nmi+0xc5/0x2b0 [ 3448.676085] Modules linked in: nls_utf8 isofs usbhid parport_pc parport btrfs xor raid6_pq libcrc32c dm_multipath dm_mod 8021q garp mrp stp llc arc4 fan nfs lockd grace fscache nls_iso8859_1 nls_cp437 af_packet sg st sr_mod cdrom iscsi_ibft iscsi_boot_sysfs sunrpc b43 cordic bcma mac80211 cfg80211 i915 ums_realtek uas usb_storage libarc4 dell_laptop gpio_ich ledtrig_audio dell_wmi rfkill sparse_keymap wmi_bmof dell_smbios dell_wmi_descriptor dcdbas i2c_algo_bit ahci drm_kms_helper libahci syscopyarea sysfillrect sysimgblt fb_sys_fops tg3 cec joydev libata rc_core pcspkr serio_raw i2c_i801 libphy lpc_ich drm uhci_hcd ssb ehci_pci ehci_hcd mmc_core usbcore ptp pps_core hwmon pcmcia pcmcia_core thermal wmi tiny_power_button battery button ac video acpi_cpufreq scsi_dh_rdac scsi_dh_emc scsi_dh_alua edd squashfs loop [ 3448.676246] CR2: 000000000000000d [ 3448.676258] ---[ end trace 2e9b3e59a1582583 ]--- ---cut--- Filesystem is btrfs. Thanks, //richard -- You are receiving this mail because: You are the assignee for the bug.

1 6

[kernel-bugs] [Bug 1174622] New: System not reconnecting to WLAN after suspend/resume
by bugzilla_noreply＠suse.com 22 Jul '22

22 Jul '22

https://bugzilla.suse.com/show_bug.cgi?id=1174622 Bug ID: 1174622 Summary: System not reconnecting to WLAN after suspend/resume Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.2 Hardware: x86-64 OS: SUSE Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: holgi(a)suse.com QA Contact: qa-bugs(a)suse.de CC: tiwai(a)suse.com Found By: Development Blocker: --- Created attachment 840122 --> https://bugzilla.suse.com/attachment.cgi?id=840122&action=edit Output of hwinfo --netcard System with NetworkManger is connected to a wifi network. After suspend and resume later, it is not able to reconnect to the same wifi network. After a reboot, system is connecting to the same wifi network without any problems. -- You are receiving this mail because: You are the assignee for the bug.

1 27

[kernel-bugs] [Bug 1174868] New: Upgrade to LEAP 15.2 makes Thinkpad 480s sometimes completely freezes, 20°C warmer and journal is trimmed
by bugzilla_noreply＠suse.com 20 Jul '22

20 Jul '22

http://bugzilla.opensuse.org/show_bug.cgi?id=1174868 Bug ID: 1174868 Summary: Upgrade to LEAP 15.2 makes Thinkpad 480s sometimes completely freezes, 20°C warmer and journal is trimmed Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.2 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: markus.zimmermann(a)symflower.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- One of our machines here a Thinkpad T480s on openSUSE 15.2 kernel 5.3.18-lp152.33-default. In general this machine was upgraded from LEAP 15.1 to 15.2 and then the problems started to show. The CPU is constantly hotter while working. by 20°C. This machine now freezes sometimes completely. The machine is then - not pingable - no keyboard interaction works - lid close/open does nothng - no mouse interaction works - the notebook is really warm - When a freeze happens also a trim of the journal happens... e.g. we loose the whole journal for the day. - We SSH'ed into the machine and watched via "htop", "journal -f" and "sensors". WHen the machine freezes, there is no significant load via htop seeable, there are no interesting logs in journal and sensors shows that it is simply hotter. Interestingly, we upgraded another machine before (also a Thinkpad T480s) and this does not have any problems. We are btw on the latest firmwares using fwupdmgr. What should we try? How can we debug it? -- You are receiving this mail because: You are the assignee for the bug.

1 20

[kernel-bugs] [Bug 1177800] New: [Ten64] getsysinfo caused kernel error (synchronous external abort)
by bugzilla_noreply＠suse.com 08 Jul '22

08 Jul '22

http://bugzilla.opensuse.org/show_bug.cgi?id=1177800 Bug ID: 1177800 Summary: [Ten64] getsysinfo caused kernel error (synchronous external abort) Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: aarch64 OS: openSUSE Tumbleweed Status: NEW Severity: Major Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: afaerber(a)suse.com QA Contact: qa-bugs(a)suse.de CC: matt(a)traverse.com.au, snwint(a)suse.com, yousaf.kaukab(a)suse.com Found By: --- Blocker: --- Running `getsysinfo` (via ssh) on Tumbleweed 20201011 with kernel-default 5.9.0 from Kernel:HEAD repository caused a kernel error, with ssh getting stuck and reconnections failing. Serial login still worked. zehn:~ # getsysinfo /proc/bus/input /proc/cpuinfo /proc/device-tree /proc/devices /proc/fb /proc/filesystems /proc/interrupts /proc/iomem /proc/ioports /proc/meminfo /proc/modules /proc/net/dev /proc/partitions /proc/scsi /proc/tty /proc/version /sys /usr/sbin/getsysinfo: line 23: 2761 Segmentation fault cp -x -a --parents "$i" "$dir/$host" 2> /dev/null /var/lib/hardware/udi /proc/mounts System data written to: /tmp/zehn.tar.gz zehn:~ # [ 544.956478] Internal error: synchronous external abort: 96000210 [#1] SMP [ 544.963295] Modules linked in: af_packet ip6t_REJECT nf_reject_ipv6 ip6t_rpfilter xt_tcpudp ipt_REJECT nf_reject_ipv4 xt_conntrack ebtable_nat ebtable_broute ip6table_nat ip6table_mangle ip6table_raw ip6table_security iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_mangle iptable_raw iptable_security iscsi_ibft iscsi_boot_sysfs ip_set nfnetlink ebtable_filter ebtables rfkill ip6table_filter ip6_tables iptable_filter ip_tables x_tables fsl_dpaa2_ptp ptp_qoriq fsl_dpaa2_eth phylink xgmac_mdio hid_generic fsl_mc_dpio usbhid cdc_acm i2c_mux_pca954x i2c_mux tpm_i2c_atmel spi_fsl_qspi qoriq_thermal leds_gpio optee tee uio_pdrv_genirq uio qoriq_cpufreq nls_iso8859_1 nls_cp437 vfat fat drm xhci_plat_hcd xhci_hcd usbcore caam_jr mmc_block libdes authenc caamhash_desc caamalg_desc crypto_engine rtc_ds1307 mp886x aes_ce_blk crypto_simd cryptd aes_ce_cipher crct10dif_ce ghash_ce sha2_ce sha256_arm64 sha1_ce dpaa2_console nvme nvme_core dwc3 sdhci_of_esdhc caam sdhci_pltfm ulpi [ 544.963547] error sdhci udc_core roles mmc_core i2c_imx btrfs blake2b_generic libcrc32c xor xor_neon raid6_pq sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua [ 545.066303] CPU: 0 PID: 2761 Comm: cp Not tainted 5.9.0-1.g11733e1-default #1 openSUSE Tumbleweed (unreleased) [ 545.076303] Hardware name: traverse ten64/ten64, BIOS 2020.07-rc1-g1d4a3d9d5c 07/28/2020 [ 545.084393] pstate: 60000085 (nZCv daIf -PAN -UAO BTYPE=--) [ 545.089967] pc : dw_pcie_read+0x48/0xc0 [ 545.093799] lr : dw_pcie_access_other_conf.isra.0+0xc4/0x120 [ 545.099452] sp : ffff800012203bf0 [ 545.102759] x29: ffff800012203bf0 x28: 0000000000000400 [ 545.108067] x27: ffff00833e683400 x26: ffff008348240000 [ 545.113375] x25: ffff800010085000 x24: 0000000000000000 [ 545.118683] x23: ffff00834b239880 x22: ffff800012203cc4 [ 545.123991] x21: 0000000000000004 x20: 0000000000000400 [ 545.129299] x19: ffff00834b2398a8 x18: 0000000000000000 [ 545.134607] x17: 0000000000000000 x16: ffffafadaf1be170 [ 545.139915] x15: 0000000000000000 x14: 0000000000000000 [ 545.145222] x13: 0000000000000000 x12: 0000000000000040 [ 545.150530] x11: ffff00834bd8c920 x10: 0000000000000000 [ 545.155837] x9 : ffffafadaf12e8f4 x8 : 0000000002080000 [ 545.161145] x7 : 0000000000000000 x6 : ffff800010f00000 [ 545.166452] x5 : 0000000000000000 x4 : 0000000000000908 [ 545.171759] x3 : 0000000000000003 x2 : ffff800012203cc4 [ 545.177066] x1 : 0000000000000004 x0 : ffff800010085400 [ 545.182374] Call trace: [ 545.184816] dw_pcie_read+0x48/0xc0 [ 545.188298] dw_pcie_rd_conf+0x11c/0x150 [ 545.192217] pci_user_read_config_dword+0xa8/0x190 [ 545.197004] pci_read_config+0x1f8/0x264 [ 545.200923] sysfs_kf_bin_read+0x78/0xa0 [ 545.204840] kernfs_file_direct_read+0x90/0x220 [ 545.209365] kernfs_fop_read+0x44/0x50 [ 545.213111] vfs_read+0xb8/0x1e4 [ 545.216334] ksys_read+0x78/0x110 [ 545.219643] __arm64_sys_read+0x28/0x34 [ 545.223476] el0_svc_common.constprop.0+0x84/0x230 [ 545.228261] do_el0_svc+0x30/0xa0 [ 545.231572] el0_svc+0x18/0x50 [ 545.234621] el0_sync_handler+0x90/0x254 [ 545.238538] el0_sync+0x158/0x180 [ 545.241849] Code: 528010e0 d50323bf b900005f d65f03c0 (b9400001) [ 545.247941] ---[ end trace 68383e7eecaae870 ]--- -- You are receiving this mail because: You are the assignee for the bug.

1 5

[kernel-bugs] [Bug 1177288] New: Raspberry pi3 (model b) crashes with network gadget
by bugzilla_noreply＠suse.com 03 Jul '22

03 Jul '22

http://bugzilla.opensuse.org/show_bug.cgi?id=1177288 Bug ID: 1177288 Summary: Raspberry pi3 (model b) crashes with network gadget Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.2 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: coolo(a)suse.com QA Contact: qa-bugs(a)suse.de CC: guillaume.gardet(a)arm.com, nsaenzjulienne(a)suse.com Found By: --- Blocker: --- I use the official Leap 15.2 Jeos image on a pi3b and have a USB network device attached to it (a very special one, https://www.fibrecode.com/fc602-usb-oabr-broadr-reach-100base-t1-stick.html) and it crashes the kernel pretty reliably with the following crash dump. [ 86.184109] usb 1-1.3: USB disconnect, device number 5 [ 86.184427] cdc_ether 1-1.3:1.0 eth2: unregister 'cdc_ether' usb-3f980000.usb-1.3, CDC Ethernet Device [ 99.795717] usb 1-1.3: new high-speed USB device number 7 using dwc2 [ 99.926758] usb 1-1.3: New USB device found, idVendor=152a, idProduct=857b, bcdDevice= 2.24 [ 99.926780] usb 1-1.3: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 99.926788] usb 1-1.3: Product: FibreCode FC602 Stick [ 99.926796] usb 1-1.3: Manufacturer: FibreCode [ 99.926804] usb 1-1.3: SerialNumber: FC01330000018a69 [ 99.930380] cdc_ether 1-1.3:1.0 eth1: register 'cdc_ether' at usb-3f980000.usb-1.3, CDC Ethernet Device, fc:c2:3d:1f:7f:ad [ 99.949857] cdc_ether 1-1.3:1.0 eth2: renamed from eth1 [ 740.880346] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 7 - ChHltd set, but reason is unknown [ 740.880360] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04400001 [ 741.461843] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 1 - ChHltd set, but reason is unknown [ 741.461858] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x06400001 [ 741.880374] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 5 - ChHltd set, but reason is unknown [ 741.880386] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04400001 [ 741.880395] dwc2 3f980000.usb: dwc2_update_urb_state_abn(): trimming xfer length [ 741.880573] WARNING: CPU: 0 PID: 0 at ../drivers/usb/dwc2/hcd.c:2683 dwc2_assign_and_init_hc+0x664/0xa10 [dwc2] [ 741.880578] Modules linked in: af_packet iscsi_ibft iscsi_boot_sysfs vc4 drm_kms_helper drm btsdio snd_soc_core bluetooth snd_compress snd_bcm2835(C) nls_iso8859_1 ac97_bus nls_cp437 snd_pcm_dmaengine ecdh_generic snd_pcm bcm2835_v4l2(C) ecc vfat v4l2_common snd_timer fat videobuf2_vmalloc brcmfmac videobuf2_memops videobuf2_v4l2 snd videobuf2_common videodev mc brcmutil cpufreq_dt soundcore fb_sys_fops cfg80211 syscopyarea sysfillrect microchip sysimgblt rfkill ftdi_sio cdc_ether usbnet lan78xx usbserial mii raspberrypi_hwmon bcm2835_thermal raspberrypi_cpufreq vchiq(C) bcm2835_rng bcm2835_wdt crct10dif_ce uio_pdrv_genirq uio leds_gpio ext4 mbcache jbd2 mmc_block dwc2 udc_core usbcore sdhci_iproc sdhci_pltfm sdhci bcm2835 gpio_raspberrypi_exp mmc_core clk_raspberrypi i2c_bcm2835 bcm2835_dma fixed phy_generic dm_mirror dm_region_hash dm_log sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_mod efivarfs [ 741.880754] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G C 5.3.18-lp152.36-default #1 openSUSE Leap 15.2 (unreleased) [ 741.880759] Hardware name: raspberrypi rpi/rpi, BIOS 2020.01 06/02/2020 [ 741.880765] pstate: 60000085 (nZCv daIf -PAN -UAO) [ 741.880799] pc : dwc2_assign_and_init_hc+0x664/0xa10 [dwc2] [ 741.880834] lr : dwc2_hcd_select_transactions+0x104/0x1a0 [dwc2] [ 741.880838] sp : ffff000010003c60 [ 741.880842] x29: ffff000010003c60 x28: ffff3bd997683dc0 [ 741.880849] x27: ffffa6ec7c4c4000 x26: ffff3bd997679000 [ 741.880857] x25: 0000000000000008 x24: ffffa6ec7c6a55e0 [ 741.880864] x23: ffffa6ec6bbc5080 x22: ffffa6ec77d12830 [ 741.880871] x21: ffffa6ec79871600 x20: ffffa6ec7c6a5080 [ 741.880878] x19: ffffa6ec6bbc50c8 x18: ffffffffffffffff [ 741.880885] x17: 0000000000000001 x16: 0000000000000007 [ 741.880891] x15: ffff3bd997679708 x14: ffff3bd9978cfa28 [ 741.880898] x13: ffff3bd9978cf67e x12: ffff3bd9976a2000 [ 741.880905] x11: 0000000000000000 x10: ffff3bd9978ce000 [ 741.880912] x9 : 0000000000000000 x8 : 0000000000000003 [ 741.880919] x7 : 0000000000000176 x6 : ffff3bd9978cec90 [ 741.880925] x5 : 0000000000000001 x4 : ffffa6ec79871698 [ 741.880932] x3 : 0000000000000000 x2 : 00000000000005ee [ 741.880939] x1 : 0000000000000000 x0 : 0000000000000002 [ 741.880946] Call trace: [ 741.880984] dwc2_assign_and_init_hc+0x664/0xa10 [dwc2] [ 741.881018] dwc2_hcd_select_transactions+0x104/0x1a0 [dwc2] [ 741.881052] dwc2_release_channel+0xfc/0x280 [dwc2] [ 741.881087] dwc2_halt_channel+0xac/0x158 [dwc2] [ 741.881121] dwc2_hc_n_intr+0x860/0x8c0 [dwc2] [ 741.881155] dwc2_handle_hcd_intr+0x38c/0x450 [dwc2] [ 741.881188] _dwc2_hcd_irq+0x20/0x30 [dwc2] [ 741.881278] usb_hcd_irq+0x3c/0x60 [usbcore] [ 741.881291] __handle_irq_event_percpu+0x74/0x268 [ 741.881299] handle_irq_event_percpu+0x40/0x98 [ 741.881307] handle_irq_event+0x50/0xa8 [ 741.881314] handle_level_irq+0xd4/0x178 [ 741.881321] generic_handle_irq+0x34/0x50 [ 741.881332] bcm2836_chained_handle_irq+0x4c/0x70 [ 741.881339] generic_handle_irq+0x34/0x50 [ 741.881346] __handle_domain_irq+0x68/0xc0 [ 741.881354] bcm2836_arm_irqchip_handle_irq+0x78/0xe0 [ 741.881360] el1_irq+0xcc/0x180 [ 741.881369] arch_cpu_idle+0x40/0x1c0 [ 741.881377] default_idle_call+0x24/0x44 [ 741.881385] do_idle+0x1dc/0x2c0 [ 741.881392] cpu_startup_entry+0x28/0x30 [ 741.881400] rest_init+0xc4/0xd0 [ 741.881409] arch_call_rest_init+0x14/0x1c [ 741.881414] start_kernel+0x4e8/0x51c [ 741.881419] ---[ end trace 29007ab7897c5716 ]--- [ 742.880425] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 7 - ChHltd set, but reason is unknown [ 742.880437] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001 [ 742.880445] dwc2 3f980000.usb: dwc2_update_urb_state_abn(): trimming xfer length [ 743.880453] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 3 - ChHltd set, but reason is unknown [ 743.880465] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001 [ 743.880474] dwc2 3f980000.usb: dwc2_update_urb_state_abn(): trimming xfer length [ 744.880491] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 4 - ChHltd set, but reason is unknown [ 744.880505] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001 [ 744.880514] dwc2 3f980000.usb: dwc2_update_urb_state_abn(): trimming xfer length [ 745.880537] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 6 - ChHltd set, but reason is unknown [ 745.880549] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001 [ 745.880557] dwc2 3f980000.usb: dwc2_update_urb_state_abn(): trimming xfer length [ 746.880564] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 5 - ChHltd set, but reason is unknown [ 746.880576] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001 [ 746.880585] dwc2 3f980000.usb: dwc2_update_urb_state_abn(): trimming xfer length [ 747.880601] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 1 - ChHltd set, but reason is unknown [ 747.880612] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001 [ 747.880621] dwc2 3f980000.usb: dwc2_update_urb_state_abn(): trimming xfer length [ 748.880641] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 6 - ChHltd set, but reason is unknown [ 748.880654] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600009 [ 748.880664] dwc2 3f980000.usb: dwc2_update_urb_state_abn(): trimming xfer length [ 749.880675] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 1 - ChHltd set, but reason is unknown [ 749.880686] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001 [ 749.880695] dwc2 3f980000.usb: dwc2_update_urb_state_abn(): trimming xfer length [ 750.880718] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 4 - ChHltd set, but reason is unknown -- You are receiving this mail because: You are the assignee for the bug.

1 5

[kernel-bugs] [Bug 1177624] New: watchdog: BUG: soft lockup - CPU#16 stuck for 23s! [qemu-system-aar:4554]
by bugzilla_noreply＠suse.com 08 Mar '22

08 Mar '22

http://bugzilla.opensuse.org/show_bug.cgi?id=1177624 Bug ID: 1177624 Summary: watchdog: BUG: soft lockup - CPU#16 stuck for 23s! [qemu-system-aar:4554] Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.2 Hardware: aarch64 OS: Other Status: NEW Severity: Major Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: guillaume.gardet(a)arm.com QA Contact: qa-bugs(a)suse.de CC: afaerber(a)suse.com, dmueller(a)suse.com Found By: --- Blocker: --- Created attachment 842562 --> http://bugzilla.opensuse.org/attachment.cgi?id=842562&action=edit dmesg.log The D05 machine used as a worker for openqa.opensuse.org have been upgraded from Leap 15.1 to Leap 15.2 and shows lots of performance problems. Lots of mistyping in qemu, few screen corruptions. Checking the kernel log (in attachment), we can see some traces related to the watchdog. -- You are receiving this mail because: You are the assignee for the bug.

1 5

[kernel-bugs] [Bug 1179226] New: System hang related to power saving
by bugzilla_noreply＠suse.com 21 Jan '22

21 Jan '22

https://bugzilla.suse.com/show_bug.cgi?id=1179226 Bug ID: 1179226 Summary: System hang related to power saving Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: jc(a)phocean.net QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- # Issue : Screen and input devices would stop responding (black screen, no TTY), as soon as the computer goes into some low power mode. It can be triggered by locking the screen in Gnome (through gdm), and can also be reproduced in XFCE / LightDM by just leaving the computer for a while. # Impact : - black screen, no TTY access - unresponsive system (impossible to launch new processes, reboot, no way to switch init3 & init 5, etc.) - SSH/network access still available, existing process seem to run Moreover, no related log entry, no error (journalctl, dmesg...). # Notes : Hardware is very likely to be fine : - no issue with a Fedora LiveUSB ; - memtest tests passed. # Hardware : Asus PN40 Intel(R) Celeron(R) J4005 CPU @ 2.00GHz Intel Corporation UHD Graphics 605 (rev 03) # System Tumbleweed 20201123 I have no idea on how to debug it further. My huntch is that it is power saving related with Intel chipset. -- You are receiving this mail because: You are the assignee for the bug.

1 6

[kernel-bugs] [Bug 1176646] New: Latest Kernel has i915 GPU Hang
by bugzilla_noreply＠suse.com 19 Jan '22

19 Jan '22

http://bugzilla.opensuse.org/show_bug.cgi?id=1176646 Bug ID: 1176646 Summary: Latest Kernel has i915 GPU Hang Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: x86-64 OS: openSUSE Tumbleweed Status: NEW Severity: Critical Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: erecio(a)polywog.org QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created attachment 841741 --> http://bugzilla.opensuse.org/attachment.cgi?id=841741&action=edit dmesg output The following kernel works fine with my i915 GPU (5.6.14-1). However, the latest kernel 5.7+ (kernel-default-5.8.7-1.2.x86_64) causes my GPU to hang and it flickers and can never login. Switch back to 5.6 and it works fine. There have been other reports on Fedora with the same thing. https://bugzilla.redhat.com/show_bug.cgi?id=1843274 I have attached my dmesg output. I use the zap option to kill the xorg server and kdm comes up just fine most of the time. Trying to login is no good though. Also I can ctrl-alt-f2 to go on command line just fine. So it seems to be xorg with the new kernel. [ 163.236358] ------------[ cut here ]------------ [ 163.236365] WARNING: CPU: 0 PID: 0 at kernel/sched/core.c:4576 default_wake_function+0x16/0x30 [ 163.236366] Modules linked in: xt_MASQUERADE xt_addrtype iptable_nat nf_nat nf_log_ipv4 nf_log_common ipt_REJECT nf_reject_ipv4 xt_state xt_LOG xt_multiport xt_tcpudp xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c af_packet iscsi_ibft iscsi_boot_sysfs ip6table_filter ip6_tables iptable_filter ip_tables x_tables bpfilter rfkill tun binfmt_misc dmi_sysfs msr crypto_simd glue_helper dm_crypt intel_rapl_msr intel_rapl_common x86_pkg_temp_thermal intel_powerclamp snd_hda_codec_realtek snd_hda_codec_generic coretemp ledtrig_audio kvm_intel snd_hda_codec_hdmi snd_hda_intel kvm snd_intel_dspcfg irqbypass snd_hda_codec at24 mei_hdcp iTCO_wdt snd_hda_core intel_pmc_bxt crct10dif_pclmul crc32_pclmul ghash_clmulni_intel iTCO_vendor_support cryptd snd_hwdep pcspkr snd_pcm snd_timer fan thermal snd e1000e soundcore i2c_i801 tiny_power_button i2c_smbus button mei_me lpc_ich mei hid_generic usbhid i915 i2c_algo_bit drm_kms_helper xhci_pci xhci_pci_renesas syscopyarea sysfillrect [ 163.236389] sysimgblt fb_sys_fops cec xhci_hcd rc_core ehci_pci ehci_hcd drm crc32c_intel usbcore video sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua [ 163.236396] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.8.7-1-default #1 openSUSE Tumbleweed [ 163.236397] Hardware name: Gigabyte Technology Co., Ltd. B85M-Gaming 3/B85M-Gaming 3, BIOS F1 09/05/2014 [ 163.236399] RIP: 0010:default_wake_function+0x16/0x30 [ 163.236401] Code: e8 df 53 45 00 eb 99 0f 0b 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 f7 c2 fe ff ff ff 75 09 48 8b 7f 08 e9 da f9 ff ff <0f> 0b 48 8b 7f 08 e9 cf f9 ff ff 66 66 2e 0f 1f 84 00 00 00 00 00 [ 163.236401] RSP: 0018:ffffa51080003eb8 EFLAGS: 00010086 [ 163.236402] RAX: ffffffffb0cf0e30 RBX: ffffa51080203db0 RCX: ffffa51080003ed0 [ 163.236403] RDX: 00000000fffffffb RSI: 0000000000000003 RDI: ffffa51080203db0 [ 163.236404] RBP: ffff980009218568 R08: 0000000000000000 R09: ffffffffc0321600 [ 163.236404] R10: ffff97ffdbd86280 R11: 0000000000000001 R12: 0000000000000046 [ 163.236405] R13: ffff980009218560 R14: ffffa51080003ed0 R15: ffffa51080003f60 [ 163.236406] FS: 0000000000000000(0000) GS:ffff980017200000(0000) knlGS:0000000000000000 [ 163.236406] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 163.236407] CR2: 00007f8ff0b07000 CR3: 000000003f80a001 CR4: 00000000000606f0 [ 163.236408] Call Trace: [ 163.236409] <IRQ> [ 163.236414] autoremove_wake_function+0xe/0x30 [ 163.236460] __i915_sw_fence_complete+0x160/0x1c0 [i915] [ 163.236483] dma_i915_sw_fence_wake_timer+0x2c/0x50 [i915] [ 163.236506] signal_irq_work+0x21c/0x310 [i915] [ 163.236510] irq_work_single+0x2c/0x40 [ 163.236511] irq_work_run_list+0x2d/0x40 [ 163.236512] irq_work_run+0x14/0x30 [ 163.236514] __sysvec_irq_work+0x2d/0xb0 [ 163.236517] asm_call_on_stack+0x12/0x20 [ 163.236518] </IRQ> [ 163.236520] sysvec_irq_work+0x6f/0x90 [ 163.236522] asm_sysvec_irq_work+0x12/0x20 [ 163.236524] RIP: 0010:cpuidle_enter_state+0xb6/0x3f0 [ 163.236525] Code: 10 ee c0 4e e8 eb 52 8d ff 49 89 c7 0f 1f 44 00 00 31 ff e8 cc 69 8d ff 80 7c 24 0f 00 0f 85 d4 01 00 00 fb 66 0f 1f 44 00 00 <45> 85 e4 0f 88 e0 01 00 00 49 63 d4 4c 2b 7c 24 10 48 8d 04 52 48 [ 163.236526] RSP: 0018:ffffffffb2403e58 EFLAGS: 00000246 [ 163.236527] RAX: ffff98001722e680 RBX: ffff980017239600 RCX: 000000000000001f [ 163.236527] RDX: 0000000000000000 RSI: 000000002817b731 RDI: 0000000000000000 [ 163.236528] RBP: ffffffffb24f6260 R08: 0000002601a4c721 R09: 00000000000002ee [ 163.236528] R10: ffff98001722d444 R11: 00000000000005f4 R12: 0000000000000004 [ 163.236529] R13: 0000000000000004 R14: 0000000000000004 R15: 0000002601a4c721 [ 163.236531] ? cpuidle_enter_state+0xa4/0x3f0 [ 163.236533] cpuidle_enter+0x29/0x40 [ 163.236535] cpuidle_idle_call+0x13f/0x210 [ 163.236536] do_idle+0x73/0xd0 [ 163.236538] cpu_startup_entry+0x19/0x20 [ 163.236541] start_kernel+0x485/0x4a4 [ 163.236544] secondary_startup_64+0xb6/0xc0 [ 163.236546] ---[ end trace 5ea2057b70f281c8 ]--- [ 163.236548] ------------[ cut here ]------------ [ 574.899156] i915 0000:00:02.0: [drm] GPU HANG: ecode 7:1:8edcfc79, in ksplashqml [3389] [ 574.899728] i915 0000:00:02.0: [drm] Resetting chip for stopped heartbeat on rcs0 [ 575.003261] i915 0000:00:02.0: [drm] ksplashqml[3389] context reset due to GPU hang [ 580.786335] i915 0000:00:02.0: [drm] GPU HANG: ecode 7:1:8edcfc79, in ksplashqml [3389] [ 580.786882] i915 0000:00:02.0: [drm] Resetting chip for stopped heartbeat on rcs0 [ 580.890229] i915 0000:00:02.0: [drm] ksplashqml[3389] context reset due to GPU hang [ 583.858065] i915 0000:00:02.0: [drm] GPU HANG: ecode 7:1:8edcfc7b, in plasmashell [3461] [ 583.858294] i915 0000:00:02.0: [drm] Resetting chip for stopped heartbeat on rcs0 [ 583.961652] i915 0000:00:02.0: [drm] plasmashell[3461] context reset due to GPU hang [ 586.929534] i915 0000:00:02.0: [drm] GPU HANG: ecode 7:1:8edcfc7b, in kwin_x11 [3427] [ 586.929859] i915 0000:00:02.0: [drm] Resetting chip for stopped heartbeat on rcs0 [ 587.033116] i915 0000:00:02.0: [drm] kwin_x11[3427] context reset due to GPU hang -- You are receiving this mail because: You are the assignee for the bug.

1 4