[Bug 290279] New: sound card C-media CM6501 not listed
https://bugzilla.novell.com/show_bug.cgi?id=290279 Summary: sound card C-media CM6501 not listed Product: openSUSE 10.3 Version: Alpha 5 Platform: x86-64 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening@forge.provo.novell.com ReportedBy: m.munnix@redcross.be QAContact: jsrain@novell.com Found By: --- Created an attachment (id=150164) --> (https://bugzilla.novell.com/attachment.cgi?id=150164) log from hwinfo --sound --log log this sound device is integrated on the main board (ASRock AM2NF3-VSTA) and is listed in the manual as C-Media CM6501. The manual does not state that it is a usb device, so it would be nice if YaST sound module could at least list it with the correct driver. 1. model CM6501 not listed for this manufacturer 2. not detected as sound device by hwinfo The driver "snd_usb_audio" works # lsusb Bus 003 Device 002: ID 0424:20fc Standard Microsystems Corp. 6-in-1 Card Reader Bus 003 Device 001: ID 0000:0000 Bus 002 Device 002: ID 0d8c:0201 C-Media Electronics, Inc. Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 # hwinfo --sound lists nothing but # hwinfo --usb lists a PnP Audio Device 14: USB 00.0: 0000 Unclassified device [Created at usb.122] UDI: /org/freedesktop/Hal/devices/usb_device_d8c_201_noserial_if0 Unique ID: Zj8l.wilKvUxD7v0 Parent ID: pBe4.XN7UF4mi9R2 SysFS ID: /devices/pci0000:00/0000:00:02.1/usb2/2-4/2-4:1.0 SysFS BusID: 2-4:1.0 Hardware Class: unknown Model: "PnP Audio Device" Hotplug: USB Vendor: usb 0x0d8c Device: usb 0x0201 "PnP Audio Device" Revision: "0.10" Driver: "snd-usb-audio" Driver Modules: "snd_usb_audio" Speed: 12 Mbps Module Alias: "usb:v0D8Cp0201d0010dc00dsc00dp00ic01isc01ip00" Driver Info #0: Driver Status: snd_usb_audio is active Driver Activation Cmd: "modprobe snd_usb_audio" Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #11 (Hub) attaching log from # hwinfo --sound --log log where the device was examined but not selected for listing of audio devices -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=290279#c1 Cyril Hrubis <chrubis@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO Info Provider| |m.munnix@redcross.be --- Comment #1 from Cyril Hrubis <chrubis@novell.com> 2007-07-11 12:17:27 MST --- Please attach y2logs from your installation. If you are in doubt follow: http://en.opensuse.org/Bugs/YaST Thanks! -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=290279#c2 michel munnix <m.munnix@redcross.be> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |NEW Info Provider|m.munnix@redcross.be | --- Comment #2 from michel munnix <m.munnix@redcross.be> 2007-07-11 13:06:41 MST --- Created an attachment (id=150788) --> (https://bugzilla.novell.com/attachment.cgi?id=150788) /var/log/YaST2 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=290279 Cyril Hrubis <chrubis@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- AssignedTo|bnc-team- |yast2-maintainers@suse.de |screening@forge.provo.novell| |.com | -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=290279#c3 Gabriele Mohr <gs@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- AssignedTo|yast2-maintainers@suse.de |lslezak@novell.com --- Comment #3 from Gabriele Mohr <gs@novell.com> 2007-07-18 03:35:26 MST --- Ladislav, could you please check whether this is a problem of hardware probing or whether it can be solved in yast2-sound module. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=290279 Ladislav Slezak <lslezak@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |ASSIGNED -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=290279#c4 Ladislav Slezak <lslezak@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- AssignedTo|lslezak@novell.com |snwint@novell.com Status|ASSIGNED |NEW --- Comment #4 from Ladislav Slezak <lslezak@novell.com> 2007-07-27 02:27:05 MST --- The problem is hwinfo, 'hwinfo --sound' output is empty... -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=290279 Steffen Winterfeldt <snwint@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |ASSIGNED -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=290279#c5 --- Comment #5 from michel munnix <m.munnix@redcross.be> 2007-09-25 13:53:12 MST --- no change from alpha5 to RC1, anything in work ? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=290279#c6 --- Comment #6 from Steffen Winterfeldt <snwint@novell.com> 2007-09-26 07:11:20 MST --- Sorry, didn't get to it. usb sound cards need some work. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=290279#c7 Marcelo Borro <marcelovborro@ig.com.br> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |marcelovborro@ig.com.br --- Comment #7 from Marcelo Borro <marcelovborro@ig.com.br> 2007-10-08 22:24:19 MST --- Same problem here, mobo ASUS M2N-E SLI. I'm using 10.3 final. Any workaround? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=290279#c8 --- Comment #8 from Steffen Winterfeldt <snwint@novell.com> 2007-10-09 03:40:47 MST --- You could add to (or create) /var/lib/hardware/hd.ids an entry like vendor.id usb 0x0000 &device.id usb 0x0000 +class.id 0x401 You can get the real vendor/device numbers to fill in by running 'hwinfo --usb'. After that, 'hwinfo --sound' (and yast) should see your card. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=290279#c9 --- Comment #9 from Marcelo Borro <marcelovborro@ig.com.br> 2007-10-09 19:32:48 MST --- I did add the following lines to /var/lib/hardware/hd.ids: vendor.id usb 0x0d8c &device.id usb 0x0201 +device.name PnP Audio Device +class.id 0x401 But I still got no sound. And 'hwinfo --sound' still shows nothing. I did modprobe snd_usb_audio and if I talk on the mic I can hear on the speakers, but no sound on applications. This bug is present only in x86_64? Are there any reports of this bug in i386? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=290279#c10 --- Comment #10 from Steffen Winterfeldt <snwint@novell.com> 2007-10-10 03:48:53 MST --- Uhm, sorry. You have to set 'hwprobe=+usb' as well. Either as environment variable or as boot parameter. So, 'hwprobe=+usb hwinfo --sound' should do. (BTW, you can use 'hwinfo --dump-db 0' to see whether your hd.ids file was read correctly.) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=290279#c11 --- Comment #11 from Marcelo Borro <marcelovborro@ig.com.br> 2007-10-10 07:35:31 MST --- Thanks :-) Adding hwprobe=+usb as boot parameter allows me to find the usb sound with 'hwinfo --sound': heliserver:~ # hwinfo --sound 33: USB 00.0: 0401 Multimedia audio controller [Created at usb.122] UDI: /org/freedesktop/Hal/devices/usb_device_d8c_201_noserial_if0 Unique ID: X7GA.VsPijs0Hbo8 Parent ID: k4bc.hL0pXfs9d15 SysFS ID: /devices/pci0000:00/0000:00:02.0/usb1/1-7/1-7:1.0 SysFS BusID: 1-7:1.0 Hardware Class: sound Model: "C-Media Electronics PnP Audio Device" Hotplug: USB Vendor: usb 0x0d8c "C-Media Electronics, Inc." Device: usb 0x0201 "PnP Audio Device" Revision: "0.10" Driver: "snd-usb-audio" Driver Modules: "snd_usb_audio" Speed: 12 Mbps Module Alias: "usb:v0D8Cp0201d0010dc00dsc00dp00ic01isc01ip00" Driver Info #0: Driver Status: snd_usb_audio is active Driver Activation Cmd: "modprobe snd_usb_audio" Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #31 (Hub) BUT it still do not show on yast and alsaconf, so there's no sound yet. Checking over the Internet, I found several reposrts on Ubuntu, but the sound is identified by alsa on Ubuntu. I think that this is all I need: How to make alsa use the snd-usb-audio if alsaconf or yast do not lists it? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=290279#c12 Steffen Winterfeldt <snwint@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |NEEDINFO Info Provider| |lslezak@novell.com --- Comment #12 from Steffen Winterfeldt <snwint@novell.com> 2007-10-10 07:52:47 MST --- Ladislav, what's needed for yast? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=290279#c13 --- Comment #13 from Marcelo Borro <marcelovborro@ig.com.br> 2007-10-10 08:35:39 MST --- I tryed to configure alsa creating the file /etc/modprobe.d/alsa with this content, as described in http://alsa.opensrc.org/Usb-audio : # ALSA portion alias char-major-116 snd alias snd-card-0 snd-usb-audio # OSS/Free portion alias char-major-14 soundcore alias sound-slot-0 snd-card-0 # card #1 alias sound-service-0-0 snd-mixer-oss alias sound-service-0-1 snd-seq-oss alias sound-service-0-3 snd-pcm-oss alias sound-service-0-12 snd-pcm-oss But: heliserver:~ # aplay /opt/kde3/share/sounds/KDE_Startup.wav ALSA lib confmisc.c:768:(parse_card) cannot find card '0' ALSA lib conf.c:3510:(_snd_config_evaluate) function snd_func_card_driver returned error: Dispositivo inexistente ALSA lib confmisc.c:392:(snd_func_concat) error evaluating strings ALSA lib conf.c:3510:(_snd_config_evaluate) function snd_func_concat returned error: Dispositivo inexistente ALSA lib confmisc.c:1251:(snd_func_refer) error evaluating name ALSA lib conf.c:3510:(_snd_config_evaluate) function snd_func_refer returned error: Dispositivo inexistente ALSA lib conf.c:3982:(snd_config_expand) Evaluate error: Dispositivo inexistente ALSA lib pcm.c:2145:(snd_pcm_open_noupdate) Unknown PCM default aplay: main:546: audio open error: Dispositivo inexistente For my surprise, I got sound using xine, but it cuts the end of the file in the reproduction... But still no sound on any other application. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=290279#c14 --- Comment #14 from Marcelo Borro <marcelovborro@ig.com.br> 2007-10-10 08:55:38 MST --- Oops, I think I solved this: I've added the option "options snd-usb-audio index=0" to the alsa file and everything seems to work fine now. So, my /etc/modprobe.d/alsa file now looks like this: options snd-usb-audio index=0 # ALSA portion alias char-major-116 snd alias snd-card-0 snd-usb-audio # OSS/Free portion alias char-major-14 soundcore alias sound-slot-0 snd-card-0 # card #1 alias sound-service-0-0 snd-mixer-oss alias sound-service-0-1 snd-seq-oss alias sound-service-0-3 snd-pcm-oss alias sound-service-0-12 snd-pcm-oss I'll check if the boot parameter "hwprobe=+usb" is needed, and the /var/lib/hardware/hd.ids too. I'm building 6 machines with this mobo, I can test it a lot ;-) I'll try adding an external USB sound card to check for any problem too. Thanks :-) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=290279#c15 --- Comment #15 from Marcelo Borro <marcelovborro@ig.com.br> 2007-10-10 15:22:40 MST --- I did a fresh install of openSuse 10.3 x86_64 on one of these mobos ( Asus M2N-E SLI) with the sound card C-media CM6501. All I needed to do was to create the file /etc/modprobe.d/alsa with the content of my previous post. And assign the speaker channel to kmix. Sound is ok until now. It would be nice if yast could detect and configure CM6501 automatically, so newbies would have less difficulties ( This mobo is quite commom in Brazil ). If any further info about this sound board is needed, please feel free to ask :-) Thanks -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=290279#c16 --- Comment #16 from Stephan Kulow <coolo@novell.com> 2007-11-22 12:40:10 MST --- Ladislav? The bug is upon you -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=290279#c17 Ladislav Slezak <lslezak@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |lslezak@novell.com Info Provider|lslezak@novell.com |marcelovborro@ig.com.br --- Comment #17 from Ladislav Slezak <lslezak@novell.com> 2007-11-23 00:09:18 MST --- I'm interested in yast logs, comment #11 is strange for me, if hwinfo finds a sound device it should be visible in yast. Marcello, please run also this command in a terminal: # /usr/lib/YaST2/bin/y2base stdio scr and enter `Read(.probe.sound) then put the output here. Thank you. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=290279#c18 --- Comment #18 from michel munnix <m.munnix@redcross.be> 2007-11-25 03:51:53 MST --- Created an attachment (id=184623) --> (https://bugzilla.novell.com/attachment.cgi?id=184623) /var/log/YaST2/y2log for 'yast2 sound' Hi, I'am the original reporter of the bug. I have followed the different steps : created /var/lib/hardware/hd.ids then added boot option hwprobe=+usb requested ouput on my MB is: /usr/lib/YaST2/bin/y2base stdio scr ([]) `Read(.probe.sound) ([$["bus":"USB", "bus_hwcfg":"usb", "class_id":4, "device":"PnP Audio Device", "device_id":197121, "driver":"snd-usb-audio", "driver_m odule":"snd_usb_audio", "drivers":[$["active":true, "modprobe":true, "modules":[["snd_usb_audio", ""]]]], "hotplug":"usb", "modalias": "usb:v0D8Cp0201d0010dc00dsc00dp00ic01isc01ip00", "model":"C-Media Electronics PnP Audio Device", "old_unique_key":"DnNP.UL71t81VuO5", "parent_unique_key":"uIhY.bsOyUejIAY8", "resource":$["baud":[$["speed":12000000]]], "rev":"0.10", "sub_class_id":1, "sysfs_bu 4:1.0", "sysfs_id":"/devices/pci0000:00/0000:00:02.1/usb3/3-4/3-4:1.0", "udi":"/org/freedesktop/Hal/devices/usb_device_d8c_20 l_if0", "unique_key":"eqBD.VsPijs0Hbo8", "vendor":"C-Media Electronics, Inc.", "vendor_id":200076]]) yast2 sound does not find the sound hardware but there are these error messages in y2log (full output in the attached file): [qt-ui] YQUI_core.cc(YQUI):210 Forcing /usr/lib/qt3/lib64/libqt-mt.so.3 open failed [YCP] sound/read_routines.ycp:226 /etc/modprobe.d/sound doesn't exist [YCP] Linuxrc.ycp:26 Reading install.inf, but file doesn't exist!!! Sound.ycp:517 read_save_info: [] [YCP] sound/routines.ycp:663 vendor_id (134540) not found... [YCP] sound/routines.ycp:669 device_id (131585) not found [YCP] sound/routines.ycp:680 Missing driver name in DB for card: $["bus":"USB", "bus_hwcfg":"usb", "class_id":4, "device":"PnP Audio Device", "device_id":197121, "driver":"snd-usb-audio", "driver_module":"snd_usb_audio", "drivers":[$["active":true, "modprobe":true, "modules":[["snd_usb_audio", ""]]]], "hotplug":"usb", "modalias":"usb:v0D8Cp0201d0010dc00dsc00dp00ic01isc01ip00", "model":"C-Media Electronics PnP Audio Device", "old_unique_key":"DnNP.UL71t81VuO5", "parent_unique_key":"uIhY.bsOyUejIAY8", "resource":$["baud":[$["speed":12000000]]], "rev":"0.10", "sub_class_id":1, "sysfs_bus_id":"3-4:1.0", "sysfs_id":"/devices/pci0000:00/0000:00:02.1/usb3/3-4/3-4:1.0", "udi":"/org/freedesktop/Hal/devices/usb_device_d8c_201_noserial_if0", "unique_key":"eqBD.VsPijs0Hbo8", "vendor":"C-Media Electronics, Inc.", "vendor_id":200076] [YCP] sound/routines.ycp:693 Using driver provided by hwinfo: snd-usb_audio [YCP] sound/routines.ycp:718 card: 'C-Media Electronics PnP Audio Device', using module snd-usb_audio [YCP] sound/complex.ycp:47 unconfigured_cards: [] [YCP] sound/complex.ycp:48 modules_conf: [] -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=290279#c19 --- Comment #19 from Marcelo Borro <marcelovborro@ig.com.br> 2007-11-25 06:47:42 MST --- Ladislav I did the test here, but it shows nothing: ========== lightsaber:~ # /usr/lib/YaST2/bin/y2base stdio scr ([]) `Read(.probe.sound) ([]) YaST got signal 2 at YCP file :1 ========== But I'm not using the /var/lib/hardware/hd.ids and the 'hwprobe=+usb hwinfo --sound' boot parameter on this machine. On this machine I've added the modprobe alsa archive manually. I did this stuff on a machine that was already delivered to a client. Do you wan't me to add the hd.ids and the boot parameters in this machine to make the test again? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=290279#c20 --- Comment #20 from Marcelo Borro <marcelovborro@ig.com.br> 2007-11-25 07:02:54 MST --- Just an additional "user level" info. I can't use skype with this sound board, the mic sound on skype is totally distorted. But it works ok on other apps like audacity. I guess this is an Alsa (or skype incompatibility with this sound board) issue... -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=290279#c21 Ladislav Slezak <lslezak@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- AssignedTo|snwint@novell.com |lslezak@novell.com Status|NEEDINFO |ASSIGNED Info Provider|marcelovborro@ig.com.br | --- Comment #21 from Ladislav Slezak <lslezak@novell.com> 2007-11-26 03:48:36 MST --- Marcelo, you don't have to reproduce the problem, comment #18 provides the info I need. The Yast module correctly finds an unknown device (not in the database) and wants to use the driver suggested by hwinfo (snd-usb_audio). This is correct, but then suddenly the information is lost and there is no sound card. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=290279 Jiri Srain <jsrain@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Priority|P5 - None |P3 - Medium -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=290279 User lslezak@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=290279#c22 Ladislav Slezak <lslezak@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |jsuchome@novell.com --- Comment #22 from Ladislav Slezak <lslezak@novell.com> 2009-02-26 05:54:41 MST --- Comment #18 says: [YCP] sound/routines.ycp:680 Missing driver name in DB for card: $["bus":"USB",... [YCP] sound/routines.ycp:693 Using driver provided by hwinfo: snd-usb_audio But the DB currently contains the snd-usb-audio driver. Can anyone reproduce it in 11.1? The bug may be already fixed... -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=290279 User m.munnix@redcross.be added comment https://bugzilla.novell.com/show_bug.cgi?id=290279#c23 --- Comment #23 from michel munnix <m.munnix@redcross.be> 2009-02-26 16:04:40 MST --- Created an attachment (id=275846) --> (https://bugzilla.novell.com/attachment.cgi?id=275846) from y2log when deleting then adding sound card The sound card was not detected at 11.1 installation When using yast2 sound to configure soundlinux-bcpx:~ # hwinfo --sound, it was not detected, so I had to add manually the right driver to make it work. hwinfo --sound has no output trying to reproduce what was done in 10.3, after adding again to /var/lib/hardware/hd.ids the lines from comment #9 and booting with hwprobe=+usb I get: linux-bcpx:~ # hwinfo --sound 34: USB 00.0: 0401 Multimedia audio controller [Created at usb.122] UDI: /org/freedesktop/Hal/devices/usb_device_d8c_201_noserial_if0 Unique ID: Zj8l.VsPijs0Hbo8 Parent ID: pBe4.VUqQobnTCp0 SysFS ID: /devices/pci0000:00/0000:00:02.1/usb2/2-4/2-4:1.0 SysFS BusID: 2-4:1.0 Hardware Class: sound Model: "C-Media Electronics PnP Audio Device" Hotplug: USB Vendor: usb 0x0d8c "C-Media Electronics, Inc." Device: usb 0x0201 "PnP Audio Device" Revision: "0.10" Driver: "snd-usb-audio" Driver Modules: "snd_usb_audio" Speed: 12 Mbps Module Alias: "usb:v0D8Cp0201d0010dc00dsc00dp00ic01isc01ip00" Driver Info #0: Driver Status: snd_usb_audio is active Driver Activation Cmd: "modprobe snd_usb_audio" Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #31 (Hub) and linux-bcpx:~ # /usr/lib/YaST2/bin/y2base stdio scr ([]) `Read(.probe.sound) ([$["bus":"USB", "bus_hwcfg":"usb", "class_id":4, "device":"PnP Audio Device", "device_id":197121, "driver":"snd-usb-audio", "driver_module":"snd_usb_audio", "drivers":[$["active":true, "modprobe":true, "modules":[["snd_usb_audio", ""]]]], "hotplug":"usb", "modalias":"usb:v0D8Cp0201d0010dc00dsc00dp00ic01isc01ip00", "model":"C-Media Electronics PnP Audio Device", "old_unique_key":"DnNP.UL71t81VuO5", "parent_unique_key":"pBe4.VUqQobnTCp0", "resource":$["baud":[$["speed":12000000]]], "rev":"0.10", "sub_class_id":1, "sysfs_bus_id":"2-4:1.0", "sysfs_id":"/devices/pci0000:00/0000:00:02.1/usb2/2-4/2-4:1.0", "udi":"/org/freedesktop/Hal/devices/usb_device_d8c_201_noserial_if0", "unique_key":"Zj8l.VsPijs0Hbo8", "vendor":"C-Media Electronics, Inc.", "vendor_id":200076]]) when running yast2 sound, I have again : 2009-02-26 23:48:16 <2> linux-bcpx(5956) [YCP] sound/routines.ycp:676 Missing driver name in DB for card: $["bus":"USB", "bus_hwcfg":"usb", "class_id":4, "device":"PnP Audio Device", "device_id":197121, "drivers":[$["active":false, "modprobe":true, "modules":[["snd_usb_audio", ""]]]], "hotplug":"usb", "modalias":"usb:v0D8Cp0201d0010dc00dsc00dp00ic01isc01ip00", "model":"C-Media Electronics PnP Audio Device", "old_unique_key":"DnNP.UL71t81VuO5", "parent_unique_key":"pBe4.VUqQobnTCp0", "resource":$["baud":[$["speed":12000000]]], "rev":"0.10", "sub_class_id":1, "sysfs_bus_id":"2-4:1.0", "sysfs_id":"/devices/pci0000:00/0000:00:02.1/usb2/2-4/2-4:1.0", "udi":"/org/freedesktop/Hal/devices/usb_device_d8c_201_noserial_if0", "unique_key":"Zj8l.VsPijs0Hbo8", "vendor":"C-Media Electronics, Inc.", "vendor_id":200076] 2009-02-26 23:48:16 <2> linux-bcpx(5956) [YCP] sound/routines.ycp:689 Using driver provided by hwinfo: snd-usb_audio -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=290279 User m.munnix@redcross.be added comment https://bugzilla.novell.com/show_bug.cgi?id=290279#c24 --- Comment #24 from michel munnix <m.munnix@redcross.be> 2009-02-28 07:06:41 MST --- Created an attachment (id=276197) --> (https://bugzilla.novell.com/attachment.cgi?id=276197) hwinfo patch: support for usb audio and chipcard with this patch for hwinfo, at least hwinfo can detect the onboard usb sound card without special quirks: hwinfo --sound 35: USB 00.0: 0401 Multimedia audio controller [Created at usb.122] UDI: /org/freedesktop/Hal/devices/usb_device_d8c_201_noserial_if0 Unique ID: eqBD.VsPijs0Hbo8 Parent ID: uIhY.VUqQobnTCp0 SysFS ID: /devices/pci0000:00/0000:00:02.1/usb3/3-4/3-4:1.0 SysFS BusID: 3-4:1.0 Hardware Class: sound Model: "C-Media Electronics PnP Audio Device" Hotplug: USB Vendor: usb 0x0d8c "C-Media Electronics, Inc." Device: usb 0x0201 "PnP Audio Device" Revision: "0.10" Driver: "snd-usb-audio" Driver Modules: "snd_usb_audio" Speed: 12 Mbps Module Alias: "usb:v0D8Cp0201d0010dc00dsc00dp00ic01isc01ip00" Driver Info #0: Driver Status: snd_usb_audio is active Driver Activation Cmd: "modprobe snd_usb_audio" Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #32 (Hub) should I open a new bug for this patch or is it ok to propose the patch here ? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=290279 User lslezak@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=290279#c25 --- Comment #25 from Ladislav Slezak <lslezak@novell.com> 2009-03-02 03:51:35 MST --- Attach the patch here. Thank you! -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=290279 User m.munnix@redcross.be added comment https://bugzilla.novell.com/show_bug.cgi?id=290279#c26 --- Comment #26 from michel munnix <m.munnix@redcross.be> 2009-03-05 14:21:49 MST --- Created an attachment (id=277483) --> (https://bugzilla.novell.com/attachment.cgi?id=277483) yast2_sound patch: fix driver_name to module_name conversion here the fix for the following problem : snd_usb_audio has 2 underscores sound/routines.ycp:689 Using driver provided by hwinfo: snd-usb_audio -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
participants (1)
-
bugzilla_noreply＠novell.com