September 2021 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 1177288] New: Raspberry pi3 (model b) crashes with network gadget
by bugzilla_noreply＠suse.com 03 Jul '22

03 Jul '22

http://bugzilla.opensuse.org/show_bug.cgi?id=1177288 Bug ID: 1177288 Summary: Raspberry pi3 (model b) crashes with network gadget Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.2 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: coolo(a)suse.com QA Contact: qa-bugs(a)suse.de CC: guillaume.gardet(a)arm.com, nsaenzjulienne(a)suse.com Found By: --- Blocker: --- I use the official Leap 15.2 Jeos image on a pi3b and have a USB network device attached to it (a very special one, https://www.fibrecode.com/fc602-usb-oabr-broadr-reach-100base-t1-stick.html) and it crashes the kernel pretty reliably with the following crash dump. [ 86.184109] usb 1-1.3: USB disconnect, device number 5 [ 86.184427] cdc_ether 1-1.3:1.0 eth2: unregister 'cdc_ether' usb-3f980000.usb-1.3, CDC Ethernet Device [ 99.795717] usb 1-1.3: new high-speed USB device number 7 using dwc2 [ 99.926758] usb 1-1.3: New USB device found, idVendor=152a, idProduct=857b, bcdDevice= 2.24 [ 99.926780] usb 1-1.3: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 99.926788] usb 1-1.3: Product: FibreCode FC602 Stick [ 99.926796] usb 1-1.3: Manufacturer: FibreCode [ 99.926804] usb 1-1.3: SerialNumber: FC01330000018a69 [ 99.930380] cdc_ether 1-1.3:1.0 eth1: register 'cdc_ether' at usb-3f980000.usb-1.3, CDC Ethernet Device, fc:c2:3d:1f:7f:ad [ 99.949857] cdc_ether 1-1.3:1.0 eth2: renamed from eth1 [ 740.880346] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 7 - ChHltd set, but reason is unknown [ 740.880360] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04400001 [ 741.461843] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 1 - ChHltd set, but reason is unknown [ 741.461858] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x06400001 [ 741.880374] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 5 - ChHltd set, but reason is unknown [ 741.880386] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04400001 [ 741.880395] dwc2 3f980000.usb: dwc2_update_urb_state_abn(): trimming xfer length [ 741.880573] WARNING: CPU: 0 PID: 0 at ../drivers/usb/dwc2/hcd.c:2683 dwc2_assign_and_init_hc+0x664/0xa10 [dwc2] [ 741.880578] Modules linked in: af_packet iscsi_ibft iscsi_boot_sysfs vc4 drm_kms_helper drm btsdio snd_soc_core bluetooth snd_compress snd_bcm2835(C) nls_iso8859_1 ac97_bus nls_cp437 snd_pcm_dmaengine ecdh_generic snd_pcm bcm2835_v4l2(C) ecc vfat v4l2_common snd_timer fat videobuf2_vmalloc brcmfmac videobuf2_memops videobuf2_v4l2 snd videobuf2_common videodev mc brcmutil cpufreq_dt soundcore fb_sys_fops cfg80211 syscopyarea sysfillrect microchip sysimgblt rfkill ftdi_sio cdc_ether usbnet lan78xx usbserial mii raspberrypi_hwmon bcm2835_thermal raspberrypi_cpufreq vchiq(C) bcm2835_rng bcm2835_wdt crct10dif_ce uio_pdrv_genirq uio leds_gpio ext4 mbcache jbd2 mmc_block dwc2 udc_core usbcore sdhci_iproc sdhci_pltfm sdhci bcm2835 gpio_raspberrypi_exp mmc_core clk_raspberrypi i2c_bcm2835 bcm2835_dma fixed phy_generic dm_mirror dm_region_hash dm_log sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_mod efivarfs [ 741.880754] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G C 5.3.18-lp152.36-default #1 openSUSE Leap 15.2 (unreleased) [ 741.880759] Hardware name: raspberrypi rpi/rpi, BIOS 2020.01 06/02/2020 [ 741.880765] pstate: 60000085 (nZCv daIf -PAN -UAO) [ 741.880799] pc : dwc2_assign_and_init_hc+0x664/0xa10 [dwc2] [ 741.880834] lr : dwc2_hcd_select_transactions+0x104/0x1a0 [dwc2] [ 741.880838] sp : ffff000010003c60 [ 741.880842] x29: ffff000010003c60 x28: ffff3bd997683dc0 [ 741.880849] x27: ffffa6ec7c4c4000 x26: ffff3bd997679000 [ 741.880857] x25: 0000000000000008 x24: ffffa6ec7c6a55e0 [ 741.880864] x23: ffffa6ec6bbc5080 x22: ffffa6ec77d12830 [ 741.880871] x21: ffffa6ec79871600 x20: ffffa6ec7c6a5080 [ 741.880878] x19: ffffa6ec6bbc50c8 x18: ffffffffffffffff [ 741.880885] x17: 0000000000000001 x16: 0000000000000007 [ 741.880891] x15: ffff3bd997679708 x14: ffff3bd9978cfa28 [ 741.880898] x13: ffff3bd9978cf67e x12: ffff3bd9976a2000 [ 741.880905] x11: 0000000000000000 x10: ffff3bd9978ce000 [ 741.880912] x9 : 0000000000000000 x8 : 0000000000000003 [ 741.880919] x7 : 0000000000000176 x6 : ffff3bd9978cec90 [ 741.880925] x5 : 0000000000000001 x4 : ffffa6ec79871698 [ 741.880932] x3 : 0000000000000000 x2 : 00000000000005ee [ 741.880939] x1 : 0000000000000000 x0 : 0000000000000002 [ 741.880946] Call trace: [ 741.880984] dwc2_assign_and_init_hc+0x664/0xa10 [dwc2] [ 741.881018] dwc2_hcd_select_transactions+0x104/0x1a0 [dwc2] [ 741.881052] dwc2_release_channel+0xfc/0x280 [dwc2] [ 741.881087] dwc2_halt_channel+0xac/0x158 [dwc2] [ 741.881121] dwc2_hc_n_intr+0x860/0x8c0 [dwc2] [ 741.881155] dwc2_handle_hcd_intr+0x38c/0x450 [dwc2] [ 741.881188] _dwc2_hcd_irq+0x20/0x30 [dwc2] [ 741.881278] usb_hcd_irq+0x3c/0x60 [usbcore] [ 741.881291] __handle_irq_event_percpu+0x74/0x268 [ 741.881299] handle_irq_event_percpu+0x40/0x98 [ 741.881307] handle_irq_event+0x50/0xa8 [ 741.881314] handle_level_irq+0xd4/0x178 [ 741.881321] generic_handle_irq+0x34/0x50 [ 741.881332] bcm2836_chained_handle_irq+0x4c/0x70 [ 741.881339] generic_handle_irq+0x34/0x50 [ 741.881346] __handle_domain_irq+0x68/0xc0 [ 741.881354] bcm2836_arm_irqchip_handle_irq+0x78/0xe0 [ 741.881360] el1_irq+0xcc/0x180 [ 741.881369] arch_cpu_idle+0x40/0x1c0 [ 741.881377] default_idle_call+0x24/0x44 [ 741.881385] do_idle+0x1dc/0x2c0 [ 741.881392] cpu_startup_entry+0x28/0x30 [ 741.881400] rest_init+0xc4/0xd0 [ 741.881409] arch_call_rest_init+0x14/0x1c [ 741.881414] start_kernel+0x4e8/0x51c [ 741.881419] ---[ end trace 29007ab7897c5716 ]--- [ 742.880425] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 7 - ChHltd set, but reason is unknown [ 742.880437] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001 [ 742.880445] dwc2 3f980000.usb: dwc2_update_urb_state_abn(): trimming xfer length [ 743.880453] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 3 - ChHltd set, but reason is unknown [ 743.880465] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001 [ 743.880474] dwc2 3f980000.usb: dwc2_update_urb_state_abn(): trimming xfer length [ 744.880491] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 4 - ChHltd set, but reason is unknown [ 744.880505] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001 [ 744.880514] dwc2 3f980000.usb: dwc2_update_urb_state_abn(): trimming xfer length [ 745.880537] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 6 - ChHltd set, but reason is unknown [ 745.880549] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001 [ 745.880557] dwc2 3f980000.usb: dwc2_update_urb_state_abn(): trimming xfer length [ 746.880564] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 5 - ChHltd set, but reason is unknown [ 746.880576] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001 [ 746.880585] dwc2 3f980000.usb: dwc2_update_urb_state_abn(): trimming xfer length [ 747.880601] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 1 - ChHltd set, but reason is unknown [ 747.880612] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001 [ 747.880621] dwc2 3f980000.usb: dwc2_update_urb_state_abn(): trimming xfer length [ 748.880641] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 6 - ChHltd set, but reason is unknown [ 748.880654] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600009 [ 748.880664] dwc2 3f980000.usb: dwc2_update_urb_state_abn(): trimming xfer length [ 749.880675] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 1 - ChHltd set, but reason is unknown [ 749.880686] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001 [ 749.880695] dwc2 3f980000.usb: dwc2_update_urb_state_abn(): trimming xfer length [ 750.880718] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 4 - ChHltd set, but reason is unknown -- You are receiving this mail because: You are on the CC list for the bug.

1 5

[Bug 1190364] New: Leap 15.2 Repository is regnerating so fast zypper ref never completes
by bugzilla_noreply＠suse.com 01 Jul '22

01 Jul '22

http://bugzilla.opensuse.org/show_bug.cgi?id=1190364 Bug ID: 1190364 Summary: Leap 15.2 Repository is regnerating so fast zypper ref never completes Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.2 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Other Assignee: screening-team-bugs(a)suse.de Reporter: archie.cobbs(a)gmail.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- zypper refresh is failing because for some unknown reason the repository is being regenerated every 3-5 minutes, and because zypper takes several minutes to download the meta-data, the files disappear before it can finish, resulting in the errors shown below. I'm watching the "Last Modified" timestamps visible here: http://download.opensuse.org/update/leap/15.2/oss/repodata/ and they are updating every few minutes. Obviously the repository meta-data shouldn't be regenerated that often. I'm sure the mirrors are creating a bunch of extra traffic due to this as well. Log of failures... $ zypper ref Repository 'openSUSE Leap Non-OSS (15.2)' is up to date. Repository 'openSUSE Leap OSS (15.2)' is up to date. Retrieving repository 'openSUSE Leap Update (15.2)' metadata ..........................................................................................................................................................................[error] Repository 'openSUSE Leap Update (15.2)' is invalid. [repo-update|http://download.opensuse.org/update/leap/15.2/oss/] Valid metadata not found at specified URL History: - File './repodata/81cf5f057ca38b532ac1123c445c36f4971cedb4e15833b5633057405d8926c0-primary.xml.gz' not found on medium 'http://download.opensuse.org/update/leap/15.2/oss/' - Can't provide ./repodata/81cf5f057ca38b532ac1123c445c36f4971cedb4e15833b5633057405d8926c0-primary.xml.gz Please check if the URIs defined for this repository are pointing to a valid repository. Skipping repository 'openSUSE Leap Update (15.2)' because of the above error. Repository 'openSUSE Leap Update Non-OSS (15.2)' is up to date. Some of the repositories have not been refreshed because of an error. $ zypper ref Repository 'openSUSE Leap Non-OSS (15.2)' is up to date. Repository 'openSUSE Leap OSS (15.2)' is up to date. Retrieving repository 'openSUSE Leap Update (15.2)' metadata ..........................................................................................................................................................................[error] Repository 'openSUSE Leap Update (15.2)' is invalid. [repo-update|http://download.opensuse.org/update/leap/15.2/oss/] Valid metadata not found at specified URL History: - File './repodata/bfa5c8e314980c6140de4b9f869b9470b2e5b6cdb1218617c148e289e710d571-primary.xml.gz' not found on medium 'http://download.opensuse.org/update/leap/15.2/oss/' - Can't provide ./repodata/bfa5c8e314980c6140de4b9f869b9470b2e5b6cdb1218617c148e289e710d571-primary.xml.gz Please check if the URIs defined for this repository are pointing to a valid repository. Skipping repository 'openSUSE Leap Update (15.2)' because of the above error. Repository 'openSUSE Leap Update Non-OSS (15.2)' is up to date. Some of the repositories have not been refreshed because of an error. $ zypper clean All repositories have been cleaned up. $ zypper ref Repository 'openSUSE Leap Non-OSS (15.2)' is up to date. Repository 'openSUSE Leap OSS (15.2)' is up to date. Retrieving repository 'openSUSE Leap Update (15.2)' metadata ..........................................................................................................................................................................[error] Repository 'openSUSE Leap Update (15.2)' is invalid. [repo-update|http://download.opensuse.org/update/leap/15.2/oss/] Valid metadata not found at specified URL History: - File './repodata/a90126512bf96e5d71ce7449b79687448777d27839d8f1a1003d1b388a0a1e91-primary.xml.gz' not found on medium 'http://download.opensuse.org/update/leap/15.2/oss/' - Can't provide ./repodata/a90126512bf96e5d71ce7449b79687448777d27839d8f1a1003d1b388a0a1e91-primary.xml.gz Please check if the URIs defined for this repository are pointing to a valid repository. Skipping repository 'openSUSE Leap Update (15.2)' because of the above error. Repository 'openSUSE Leap Update Non-OSS (15.2)' is up to date. Some of the repositories have not been refreshed because of an error. $ zypper ref Repository 'openSUSE Leap Non-OSS (15.2)' is up to date. Repository 'openSUSE Leap OSS (15.2)' is up to date. Retrieving repository 'openSUSE Leap Update (15.2)' metadata ..........................................................................................................................................................................[error] Repository 'openSUSE Leap Update (15.2)' is invalid. [repo-update|http://download.opensuse.org/update/leap/15.2/oss/] Valid metadata not found at specified URL History: - Location 'http://download.opensuse.org/update/leap/15.2/oss/repodata/679c33c618c30914…' is temporarily unaccessible. - Can't provide ./repodata/679c33c618c3091434628484b57de02379df52303d2000099ab72f00b8080e1e-primary.xml.gz Please check if the URIs defined for this repository are pointing to a valid repository. Skipping repository 'openSUSE Leap Update (15.2)' because of the above error. Repository 'openSUSE Leap Update Non-OSS (15.2)' is up to date. Some of the repositories have not been refreshed because of an error. $ zypper ref Repository 'openSUSE Leap Non-OSS (15.2)' is up to date. Repository 'openSUSE Leap OSS (15.2)' is up to date. Retrieving repository 'openSUSE Leap Update (15.2)' metadata ..........................................................................................................................................................................[error] Repository 'openSUSE Leap Update (15.2)' is invalid. [repo-update|http://download.opensuse.org/update/leap/15.2/oss/] Valid metadata not found at specified URL History: - Location 'http://download.opensuse.org/update/leap/15.2/oss/repodata/e8a3fe9b56d6d62f…' is temporarily unaccessible. - Can't provide ./repodata/e8a3fe9b56d6d62faa44136ab1349dab311724dd403ca3a1d952bfa84be56027-primary.xml.gz Please check if the URIs defined for this repository are pointing to a valid repository. Skipping repository 'openSUSE Leap Update (15.2)' because of the above error. Repository 'openSUSE Leap Update Non-OSS (15.2)' is up to date. Some of the repositories have not been refreshed because of an error. $ -- You are receiving this mail because: You are on the CC list for the bug.

1 4

[Bug 1118564] New: flatpak: upgrade to version 1.0.5
by bugzilla_noreply＠novell.com 30 Jun '22

30 Jun '22

http://bugzilla.opensuse.org/show_bug.cgi?id=1118564 Bug ID: 1118564 Summary: flatpak: upgrade to version 1.0.5 Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.0 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Other Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: mpdesouza(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- openSUSE Leap 15 comes with an older flatpak version, and as result one cannot install VLC app from flathub, because it need at least version 1.0.5. By installing the flatpak package from tumbleweed (version 1.0.5) in Leap 15 works out of the box, without issues, and making possible to install VLC. As there isn't any hard dependency from flatpak regarding different library versions between Leap 15 and Tumbleweed, it would be easy to update the current version of flatpak in Leap 15. -- You are receiving this mail because: You are on the CC list for the bug.

2 2

[Bug 1028460] New: grub2 ignores active_devices
by bugzilla_noreply＠novell.com 30 Jun '22

30 Jun '22

http://bugzilla.opensuse.org/show_bug.cgi?id=1028460 Bug ID: 1028460 Summary: grub2 ignores active_devices Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: S/390-64 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Bootloader Assignee: rw(a)suse.de Reporter: bg(a)suse.com QA Contact: jsrain(a)suse.com Found By: --- Blocker: --- after doing the latest update, I found that /boot/zipl/active_devices.txt was emptied. Even after copying the old data in there, the newly generated initrd ignores active_devices.txt which results in an unbootable system. -- You are receiving this mail because: You are on the CC list for the bug.

2 2

[Bug 1189280] New: [Staging] [Systemd 249.2] openQA test fails in journal_check
by bugzilla_noreply＠suse.com 30 Jun '22

30 Jun '22

http://bugzilla.opensuse.org/show_bug.cgi?id=1189280 Bug ID: 1189280 Summary: [Staging] [Systemd 249.2] openQA test fails in journal_check Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other URL: https://openqa.opensuse.org/tests/1870752/modules/jour nal_check/steps/23 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem Assignee: fbui(a)suse.com Reporter: rbrown(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: openQA Blocker: Yes ## Observation openQA test in scenario microos-Staging:L-Staging-DVD-x86_64-container-host-microos@64bit-2G-HD40G fails in [journal_check](https://openqa.opensuse.org/tests/1870752/modules/journal_ch… In simple words - systemd 249.9 causes the following errors to appear in the journal Aug 07 07:59:17.754740 localhost systemd[1355]: /usr/lib/systemd/system-generators/systemd-gpt-auto-generator failed with exit status 1. Aug 07 07:59:17.759839 localhost systemd-gpt-auto-generator[1362]: Failed to dissect: Permission denied Because of these errors the systemd submission cannot be checked in unless we are certain they are safe to ignore. ## Test suite description ## Reproducible Fails since (at least) Build [L.222.1](https://openqa.opensuse.org/tests/1870318) ## Expected result Last good: [L.220.1](https://openqa.opensuse.org/tests/1844974) (or more recent) ## Further details Always latest result in this scenario: [latest](https://openqa.opensuse.org/tests/latest?arch=x86_64&distri=microos… -- You are receiving this mail because: You are on the CC list for the bug.

1 1

[Bug 1146427] New: VUL-1: CVE-2019-14751: python-nltk: Natural Language Toolkit (NLTK) prior to version 3.4.5 is vulnerable to a directory traversal, allowing attackers to write arbitrary files via a ../ (dot dot slash)
by bugzilla_noreply＠novell.com 29 Jun '22

29 Jun '22

http://bugzilla.opensuse.org/show_bug.cgi?id=1146427 Bug ID: 1146427 Summary: VUL-1: CVE-2019-14751: python-nltk: Natural Language Toolkit (NLTK) prior to version 3.4.5 is vulnerable to a directory traversal, allowing attackers to write arbitrary files via a ../ (dot dot slash) Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.0 Hardware: Other URL: https://smash.suse.de/issue/240518/ OS: Other Status: NEW Severity: Minor Priority: P5 - None Component: Security Assignee: dmueller(a)suse.com Reporter: wolfgang.frisch(a)suse.com QA Contact: security-team(a)suse.de CC: sleep_walker(a)opensuse.org Found By: Security Response Team Blocker: --- CVE-2019-14751 Natural Language Toolkit (NLTK) prior to version 3.4.5 is vulnerable to a directory traversal, allowing attackers to write arbitrary files via a ../ (dot dot slash) in an NLTK package (ZIP archive) that is mishandled during extraction. References: http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-14751 http://people.canonical.com/~ubuntu-security/cve/2019/CVE-2019-14751.html -- You are receiving this mail because: You are on the CC list for the bug.

2 1

[Bug 1184866] New: Desktop gone black
by bugzilla_noreply＠suse.com 29 Jun '22

29 Jun '22

http://bugzilla.opensuse.org/show_bug.cgi?id=1184866 Bug ID: 1184866 Summary: Desktop gone black Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: x86-64 OS: openSUSE Tumbleweed Status: NEW Severity: Major Priority: P5 - None Component: KDE Workspace (Plasma) Assignee: opensuse-kde-bugs(a)opensuse.org Reporter: teo8976(a)gmail.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created attachment 848440 --> http://bugzilla.opensuse.org/attachment.cgi?id=848440&action=edit screenshot Attached is a screenshot of what my desktop looks like right now. I'm not sure if it's been like this since boot, because I rebooted only a few hours ago and it's possible that I never showed desktop since then (but I'm not sure because it's something that I do pretty often). -- You are receiving this mail because: You are on the CC list for the bug.

1 9

[Bug 1092326] New: Plasma Wayland does not use the configured system keyboard layout and freezes when trying to set a keyboard layout
by bugzilla_noreply＠novell.com 27 Jun '22

27 Jun '22

http://bugzilla.opensuse.org/show_bug.cgi?id=1092326 Bug ID: 1092326 Summary: Plasma Wayland does not use the configured system keyboard layout and freezes when trying to set a keyboard layout Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.0 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: KDE Workspace (Plasma) Assignee: opensuse-kde-bugs(a)opensuse.org Reporter: freek(a)opensuse.org QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- This bug report is related to bug #1091816 but behaves different in Leap 15.0. Also in this case during installation US keyboard with dead keys is configured. But there is no layout configured in systemsettings5. However starting konsole and pressing the accent key or another dead key gives a popup showing spectacle and asks to select something to make a screen copy. When trying to configure a keyboard layout in systemsettings5 the screen freezes. The mouse pointer does not move anymore. After a minute or so, I get the login screen again, but this may be caused by pressing <Ctrl><Alt>+<Backspace>+<Backspace>. I did not try to wait if without pressing these keys the login screen still appears. -- You are receiving this mail because: You are on the CC list for the bug.

2 2

[Bug 1091818] New: After starting a Wayland Plasma session and leaving the session, login into a normal Plasma session does not work
by bugzilla_noreply＠novell.com 27 Jun '22

27 Jun '22

http://bugzilla.opensuse.org/show_bug.cgi?id=1091818 Bug ID: 1091818 Summary: After starting a Wayland Plasma session and leaving the session, login into a normal Plasma session does not work Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: KDE Workspace (Plasma) Assignee: opensuse-kde-bugs(a)opensuse.org Reporter: freek(a)opensuse.org QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- I started a Wayland Plasma session. Because being unable to enter certain characters in that session I finished that session and got the login screen. I changed the type of session to a classic Plasma session and entered the password. After a while I did not enter the session, but the system returned to the login screen. I needed to reboot, to be able to start a normal Plasma session. -- You are receiving this mail because: You are on the CC list for the bug.

2 17

[Bug 1080842] New: plasma with wayland gives flickering applications
by bugzilla_noreply＠novell.com 27 Jun '22

27 Jun '22

http://bugzilla.opensuse.org/show_bug.cgi?id=1080842 Bug ID: 1080842 Summary: plasma with wayland gives flickering applications Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.0 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: KDE Workspace (Plasma) Assignee: opensuse-kde-bugs(a)opensuse.org Reporter: freek(a)opensuse.org QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- I tried Leap 15.0 updated to Build 128.1 using Plasma with Wayland. Having a few application windows open. These windows appear partly behind each other in a flickering way. The screen is constantly changing showing part of one window in front of another, but disappearing a bit later behind that window. There is no stable screen. The window with focus may be partly behind another window. -- You are receiving this mail because: You are on the CC list for the bug.

2 5