March 2021 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 1182900] AutoYaST reports: Extra element online_update_configuration in interleave"
by bugzilla_noreply＠suse.com 02 Mar '21

02 Mar '21

https://bugzilla.suse.com/show_bug.cgi?id=1182900 https://bugzilla.suse.com/show_bug.cgi?id=1182900#c12 --- Comment #12 from Andreas Vetter <vetter(a)physik.uni-wuerzburg.de> --- BTW: I am using the FTP tree of Leap 15.3. Is that recent or still missing updates? -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1174817] gcc 10.2 fails to compile current aarch64 kernel
by bugzilla_noreply＠suse.com 02 Mar '21

02 Mar '21

http://bugzilla.opensuse.org/show_bug.cgi?id=1174817 http://bugzilla.opensuse.org/show_bug.cgi?id=1174817#c11 Martin Li��ka <martin.liska(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|IN_PROGRESS |RESOLVED CC| |martin.liska(a)suse.com Resolution|--- |FIXED --- Comment #11 from Martin Li��ka <martin.liska(a)suse.com> --- Fixed. -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1182657] VUL-0: CVE-2021-21309: redis: Integer overflow on 32-bit systems
by bugzilla_noreply＠suse.com 02 Mar '21

02 Mar '21

https://bugzilla.suse.com/show_bug.cgi?id=1182657 https://bugzilla.suse.com/show_bug.cgi?id=1182657#c2 --- Comment #2 from Robert Frohl <rfrohl(a)suse.com> --- also tracking SUSE:SLE-15:Update/redis as affected. -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1182900] AutoYaST reports: Extra element online_update_configuration in interleave"
by bugzilla_noreply＠suse.com 02 Mar '21

02 Mar '21

https://bugzilla.suse.com/show_bug.cgi?id=1182900 https://bugzilla.suse.com/show_bug.cgi?id=1182900#c11 --- Comment #11 from Andreas Vetter <vetter(a)physik.uni-wuerzburg.de> --- This was meant to be xmllint (palmface) -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 403368] missing packages from gcc development
by bugzilla_noreply＠suse.com 02 Mar '21

02 Mar '21

http://bugzilla.opensuse.org/show_bug.cgi?id=403368 Martin Li��ka <martin.liska(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |martin.liska(a)suse.com Alias|gcc | -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1181618] gcc ICE on building webkit2gtk3 for Leap 15.3
by bugzilla_noreply＠suse.com 02 Mar '21

02 Mar '21

http://bugzilla.opensuse.org/show_bug.cgi?id=1181618 Martin Li��ka <martin.liska(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |martin.liska(a)suse.com -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1182838] [Build 90.1] openQA test fails in yast2_firstboot - yast2 registration failed on root password screen
by bugzilla_noreply＠suse.com 02 Mar '21

02 Mar '21

https://bugzilla.suse.com/show_bug.cgi?id=1182838 https://bugzilla.suse.com/show_bug.cgi?id=1182838#c3 --- Comment #3 from Stefan Hundhammer <shundhammer(a)suse.com> --- So, if we need registration in firstboot, we should make sure that the corresponding package is installed. -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1182838] [Build 90.1] openQA test fails in yast2_firstboot - yast2 registration failed on root password screen
by bugzilla_noreply＠suse.com 02 Mar '21

02 Mar '21

https://bugzilla.suse.com/show_bug.cgi?id=1182838 https://bugzilla.suse.com/show_bug.cgi?id=1182838#c2 --- Comment #2 from Stefan Hundhammer <shundhammer(a)suse.com> --- I don't see package yast2-registration in the rpm-qa file of that y2logs tarball. That's where registration.rb lives, and that's what the y2logs report missing. -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1141433] Get no hint that network connection is made by NetworkManager when start YaST Networkmanagement
by bugzilla_noreply＠suse.com 02 Mar '21

02 Mar '21

https://bugzilla.suse.com/show_bug.cgi?id=1141433 https://bugzilla.suse.com/show_bug.cgi?id=1141433#c28 Guillaume GARDET <guillaume.gardet(a)arm.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|CONFIRMED |IN_PROGRESS --- Comment #28 from Guillaume GARDET <guillaume.gardet(a)arm.com> --- Leap 15.1 is EOL. This should be fixed in Tumbleweed and Leap 15.3 since: https://build.opensuse.org/request/show/859627 We would need to backport this fix to Leap 15.2. -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1181890] New: Sensors: /usr/sbin/pwmconfig reaches line 456 with $OS being unset
by bugzilla_noreply＠suse.com 02 Mar '21

02 Mar '21

http://bugzilla.opensuse.org/show_bug.cgi?id=1181890 Bug ID: 1181890 Summary: Sensors: /usr/sbin/pwmconfig reaches line 456 with $OS being unset Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Linux Status: NEW Severity: Normal Priority: P5 - None Component: Other Assignee: screening-team-bugs(a)suse.de Reporter: 7eggert(a)gmx.de QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- In the script /usr/sbin/pwmconfig, these lines are reached with $OS being unset or "", causing "3*/4" to be evaluated. echo " $j ... speed was $OS now $S" let threshold=3*$OS/4 Dump the log from my system here and everything I remember to generate: --->8--- root@mysystem# /usr/sbin/pwmconfig # pwmconfig version 3.6.0 This program will search your sensors for pulse width modulation (pwm) controls, and test each one to see if it controls a fan on your motherboard. Note that many motherboards do not have pwm circuitry installed, even if your sensor chip supports pwm. We will attempt to briefly stop each fan using the pwm controls. The program will attempt to restore each fan to full speed after testing. However, it is ** very important ** that you physically verify that the fans have been to full speed after the program has completed. Found the following devices: hwmon0 is dell_smm hwmon1 is coretemp hwmon2 is amdgpu Found the following PWM controls: hwmon0/pwm1 current value: 255 hwmon0/pwm2 current value: 255 hwmon2/pwm1 current value: 22 Giving the fans some time to reach full speed... Found the following fan sensors: hwmon0/fan1_input current speed: 3432 RPM hwmon0/fan2_input current speed: 2202 RPM cat: hwmon2/fan1_input: Invalid argument hwmon2/fan1_input current speed: RPM Warning!!! This program will stop your fans, one at a time, for approximately 5 seconds each!!! This may cause your processor temperature to rise!!! If you do not want to do this hit control-C now!!! Hit return to continue: Testing pwm control hwmon0/pwm1 ... cat: hwmon2/fan1_input: Invalid argument hwmon0/fan1_input ... speed was 3432 now 1492 It appears that fan hwmon0/fan1_input is controlled by pwm hwmon0/pwm1 Would you like to generate a detailed correlation (y)? Note: If you had gnuplot installed, I could generate a graphical plot. PWM 255 FAN 3579 PWM 240 FAN 3597 PWM 225 FAN 3597 PWM 210 FAN 3614 PWM 195 FAN 3614 PWM 180 FAN 2332 PWM 165 FAN 1489 PWM 150 FAN 1495 PWM 135 FAN 1486 PWM 120 FAN 1498 PWM 105 FAN 1501 PWM 90 FAN 1504 PWM 75 FAN 1498 PWM 60 FAN 1489 PWM 45 FAN 1495 PWM 30 FAN 1492 PWM 28 FAN 1486 PWM 26 FAN 1486 PWM 24 FAN 1489 PWM 22 FAN 1489 PWM 20 FAN 1489 PWM 18 FAN 1489 PWM 16 FAN 1489 PWM 14 FAN 1486 PWM 12 FAN 1492 PWM 10 FAN 1495 PWM 8 FAN 1489 PWM 6 FAN 1492 PWM 4 FAN 1489 PWM 2 FAN 1489 PWM 0 FAN 1498 hwmon0/fan2_input ... speed was 2202 now 2209 no correlation hwmon2/fan1_input ... speed was now /usr/sbin/pwmconfig: line 455: let: threshold=3*/4: syntax error: operand expected (error token is "/4") /usr/sbin/pwmconfig: line 456: [: -lt: unary operator expected no correlation Testing pwm control hwmon0/pwm2 ... cat: hwmon2/fan1_input: Invalid argument hwmon0/fan1_input ... speed was 3432 now 3546 no correlation hwmon0/fan2_input ... speed was 2202 now 2242 no correlation hwmon2/fan1_input ... speed was now /usr/sbin/pwmconfig: line 455: let: threshold=3*/4: syntax error: operand expected (error token is "/4") /usr/sbin/pwmconfig: line 456: [: -lt: unary operator expected no correlation No correlations were detected. There is either no fan connected to the output of hwmon0/pwm2, or the connected fan has no rpm-signal connected to one of the tested fan sensors. (Note: not all motherboards have the pwm outputs connected to the fan connectors, check out the hardware database on http://www.almico.com/forumindex.php) Did you see/hear a fan stopping during the above test (n)? y Testing pwm control hwmon2/pwm1 ... cat: hwmon2/fan1_input: Invalid argument hwmon0/fan1_input ... speed was 3432 now 3614 no correlation hwmon0/fan2_input ... speed was 2202 now 2202 no correlation hwmon2/fan1_input ... speed was now /usr/sbin/pwmconfig: line 455: let: threshold=3*/4: syntax error: operand expected (error token is "/4") /usr/sbin/pwmconfig: line 456: [: -lt: unary operator expected no correlation No correlations were detected. There is either no fan connected to the output of hwmon2/pwm1, or the connected fan has no rpm-signal connected to one of the tested fan sensors. (Note: not all motherboards have the pwm outputs connected to the fan connectors, check out the hardware database on http://www.almico.com/forumindex.php) Did you see/hear a fan stopping during the above test (n)? Testing is complete. Please verify that all fans have returned to their normal speed. The fancontrol script can automatically respond to temperature changes of your system by changing fanspeeds. Do you want to set up its configuration file now (y)? What should be the path to your fancontrol config file (/etc/fancontrol)? Select fan output to configure, or other action: 1) hwmon0/pwm2 2) hwmon0/pwm1 3) Change INTERVAL 4) Just quit 5) Save and quit 6) Show configuration select (1-n): 2 Devices: hwmon0 is dell_smm hwmon1 is coretemp hwmon2 is amdgpu Current temperature readings are as follows: hwmon1/temp2_input 36 hwmon1/temp3_input 36 hwmon1/temp4_input 34 hwmon1/temp5_input 37 hwmon2/temp1_input 42 Select a temperature sensor as source for hwmon0/pwm1: 1) hwmon1/temp2_input 3) hwmon1/temp4_input 5) hwmon2/temp1_input 2) hwmon1/temp3_input 4) hwmon1/temp5_input 6) None (Do not affect this PWM output) select (1-n): 5 Enter the low temperature (degree C) below which the fan should spin at minimum speed (20): 30 Enter the high temperature (degree C) over which the fan should spin at maximum speed (60): 46 Enter the PWM value (0-255) to use when the temperature is over the high temperature limit (255): Select fan output to configure, or other action: 1) hwmon0/pwm2 2) hwmon0/pwm1 3) Change INTERVAL 4) Just quit 5) Save and quit 6) Show configuration select (1-n): 5 Saving configuration to /etc/fancontrol... Configuration saved --->8--- # lspci 00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11) 00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 1 (rev 11) 00:08.0 System peripheral: Intel Corporation Core Processor System Management Registers (rev 11) 00:08.1 System peripheral: Intel Corporation Core Processor Semaphore and Scratchpad Registers (rev 11) 00:08.2 System peripheral: Intel Corporation Core Processor System Control and Status Registers (rev 11) 00:08.3 System peripheral: Intel Corporation Core Processor Miscellaneous Registers (rev 11) 00:10.0 System peripheral: Intel Corporation Core Processor QPI Link (rev 11) 00:10.1 System peripheral: Intel Corporation Core Processor QPI Routing and Protocol Registers (rev 11) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation H57 Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 06) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06) 01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Tahiti XT [Radeon HD 7970/8970 OEM / R9 280X] 01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Tahiti HDMI Audio [Radeon HD 7870 XT / 7950/7970] 02:00.0 Ethernet controller: Broadcom Inc. and subsidiaries NetLink BCM57780 Gigabit Ethernet PCIe (rev 01) 03:01.0 SCSI storage controller: Adaptec AHA-2930CU (rev 03) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-Core Registers (rev 04) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 04) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 04) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 04) ff:03.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller (rev 04) ff:03.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Target Address Decoder (rev 04) ff:03.4 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Test Registers (rev 04) ff:04.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Control Registers (rev 04) ff:04.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Address Registers (rev 04) ff:04.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Rank Registers (rev 04) ff:04.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers (rev 04) ff:05.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Control Registers (rev 04) ff:05.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Address Registers (rev 04) ff:05.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Rank Registers (rev 04) ff:05.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers (rev 04) --->8--- # /usr/bin/sensors amdgpu-pci-0100 Adapter: PCI adapter fan1: N/A edge: +41.0��C (crit = +120.0��C, hyst = +90.0��C) dell_smm-virtual-0 Adapter: Virtual device Processor Fan: 1498 RPM Motherboard Fan: 2248 RPM coretemp-isa-0000 Adapter: ISA adapter Core 0: +38.0��C (high = +83.0��C, crit = +99.0��C) Core 1: +39.0��C (high = +83.0��C, crit = +99.0��C) Core 2: +36.0��C (high = +83.0��C, crit = +99.0��C) Core 3: +40.0��C (high = +83.0��C, crit = +99.0��C) --->8--- # /usr/sbin/sensors-detect # sensors-detect version 3.6.0 # System: Dell Inc. Precision T1500 [00] # Board: Dell Inc. 0XC7MM # Kernel: 5.10.9-1-default x86_64 # Processor: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz (6/30/5) This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no): Module cpuid loaded successfully. Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD Family 10h thermal sensors... No AMD Family 11h thermal sensors... No AMD Family 12h and 14h thermal sensors... No AMD Family 15h thermal sensors... No AMD Family 16h thermal sensors... No AMD Family 17h thermal sensors... No AMD Family 15h power sensors... No AMD Family 16h power sensors... No Hygon Family 18h thermal sensors... No Intel digital thermal sensor... Success! (driver `coretemp') Intel AMB FB-DIMM thermal sensor... No Intel 5500/5520/X58 thermal sensor... No VIA C7 thermal sensor... No VIA Nano thermal sensor... No Some Super I/O chips contain embedded sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): Probing for Super-I/O at 0x2e/0x2f Trying family `National Semiconductor/ITE'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... No Probing for Super-I/O at 0x4e/0x4f Trying family `National Semiconductor/ITE'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... Yes Found `Fintek F71882FG/F71883FG Super IO Sensors' Success! (address 0xa00, driver `f71882fg') Some systems (mainly servers) implement IPMI, a set of common interfaces through which system health data may be retrieved, amongst other things. We first try to get the information from SMBIOS. If we don't find it there, we have to read from arbitrary I/O ports to probe for such interfaces. This is normally safe. Do you want to scan for IPMI interfaces? (YES/no): Probing for `IPMI BMC KCS' at 0xca0... No Probing for `IPMI BMC SMIC' at 0xca8... No Some hardware monitoring chips are accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (yes/NO): Lastly, we can probe the I2C/SMBus adapters for connected hardware monitoring devices. This is the most risky part, and while it works reasonably well on most systems, it has been reported to cause trouble on some systems. Do you want to probe the I2C/SMBus adapters now? (YES/no): Using driver `i2c-i801' for device 0000:00:1f.3: Intel 3400/5 Series (PCH) Module i2c-dev loaded successfully. Next adapter: SMBus I801 adapter at 0400 (i2c-0) Do you want to scan it? (yes/NO/selectively): Next adapter: AMDGPU i2c bit bus 0x90 (i2c-1) Do you want to scan it? (yes/NO/selectively): Next adapter: AMDGPU i2c bit bus 0x91 (i2c-2) Do you want to scan it? (yes/NO/selectively): Next adapter: AMDGPU i2c bit bus 0x92 (i2c-3) Do you want to scan it? (yes/NO/selectively): Next adapter: AMDGPU i2c bit bus 0x93 (i2c-4) Do you want to scan it? (yes/NO/selectively): Next adapter: AMDGPU i2c bit bus 0x94 (i2c-5) Do you want to scan it? (yes/NO/selectively): Next adapter: AMDGPU i2c bit bus 0x95 (i2c-6) Do you want to scan it? (yes/NO/selectively): Next adapter: AMDGPU i2c bit bus 0x96 (i2c-7) Do you want to scan it? (yes/NO/selectively): Next adapter: AMDGPU i2c bit bus 0x97 (i2c-8) Do you want to scan it? (yes/NO/selectively): Next adapter: card0-DP-1 (i2c-9) Do you want to scan it? (yes/NO/selectively): Next adapter: card0-DP-2 (i2c-10) Do you want to scan it? (yes/NO/selectively): Next adapter: card0-DP-3 (i2c-11) Do you want to scan it? (yes/NO/selectively): Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9) Driver `f71882fg': * ISA bus, address 0xa00 Chip `Fintek F71882FG/F71883FG Super IO Sensors' (confidence: 9) Do you want to generate /etc/sysconfig/lm_sensors? (YES/no): Created symlink /etc/systemd/system/multi-user.target.wants/lm_sensors.service �� /usr/lib/systemd/system/lm_sensors.service. Unloading i2c-dev... OK Unloading cpuid... OK --->8--- # uname -a Linux be10 5.10.9-1-default #1 SMP Wed Jan 20 07:26:11 UTC 2021 (b7732a5) x86_64 x86_64 x86_64 GNU/Linux -- You are receiving this mail because: You are on the CC list for the bug.

1 11