September 2020 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 1114673] New: New UI for firewalld: interface not assigned to the right zone when changed to public in first run
by bugzilla_noreply＠novell.com 07 Mar '23

07 Mar '23

http://bugzilla.suse.com/show_bug.cgi?id=1114673 Bug ID: 1114673 Summary: New UI for firewalld: interface not assigned to the right zone when changed to public in first run Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 Assignee: yast2-maintainers(a)suse.de Reporter: jeriveramoya(a)suse.com QA Contact: jsrain(a)suse.com Found By: --- Blocker: --- Interface is not assigned to the right zone after following steps: - Open new UI for firewalld: yast2 firewall - Assign interface to different zone (for example public) - In Zones, set different zone (for example trusted) as default. - Accept - Check with firewall-cmd interface assignation: firewall-cmd --list-interfaces --zone=public | grep ens4 (is not there) but firewall-cmd --list-interfaces --zone=trusted | grep ens4 (it succeeds and it is pointing to the default zone not the one that was assigned) (same result also after trying a firewall-cmd --reload) Assignation works in general, but in this combination and just when the user enters first to this screen and set previous steps, does not work (perhaps some wrong initialization). Expected result: Point to the interface that is assigned in the UI (in the example, to public) -- You are receiving this mail because: You are on the CC list for the bug.

2 33

[Bug 1127481] New: Upgrade to 15.1 tries to install grub-efi even though my bootloader is Legacy BIOS and fails to install packages
by bugzilla_noreply＠novell.com 07 Mar '23

07 Mar '23

http://bugzilla.suse.com/show_bug.cgi?id=1127481 Bug ID: 1127481 Summary: Upgrade to 15.1 tries to install grub-efi even though my bootloader is Legacy BIOS and fails to install packages Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.1 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Installation Assignee: yast2-maintainers(a)suse.de Reporter: ktsamis(a)suse.com QA Contact: jsrain(a)suse.com Found By: --- Blocker: --- Created attachment 798527 --> http://bugzilla.suse.com/attachment.cgi?id=798527&action=edit logs Using the DVD I chose Upgrade and I saw the error in the Overview section at the end that it can't detect the efi partition so it might make my system unbootable and I should open a bug. The problem is after the upgrade was finished I didn't have a y2log but only y2log-1 and y2log-2. And I couldn't find the error in those. After reboot I do a zypper up and there are like 800 packages to be updated, all of them cached already. So that means it cached all the packages instead of installing and I had to do it again. After installing all of them I see the similar error here: Executing %posttrans script 'kernel-firmware-20190118-lp151.1.3.noarch.rpm' <3%>================================================================================================================================[\] Output of kernel-firmware-20190118-lp151.1.3.noarch.rpm %posttrans script: Creating initrd: /boot/initrd-4.12.14-lp150.12.48-default dracut: Executing: /usr/bin/dracut --logfile /var/log/YaST2/mkinitrd.log --force /boot/initrd-4.12.14-lp150.12.48-default 4.12.14-lp150.12.48-default dracut: *** Including module: bash *** dracut: *** Including module: systemd *** dracut: *** Including module: warpclock *** dracut: *** Including module: systemd-initrd *** dracut: *** Including module: i18n *** dracut: *** Including module: drm *** dracut: *** Including module: plymouth *** dracut: *** Including module: crypt *** dracut: *** Including module: dm *** dracut: Skipping udev rule: 64-device-mapper.rules dracut: Skipping udev rule: 60-persistent-storage-dm.rules dracut: Skipping udev rule: 55-dm.rules dracut: *** Including module: kernel-modules *** dracut: *** Including module: lvm *** dracut: Skipping udev rule: 64-device-mapper.rules dracut: Skipping udev rule: 56-lvm.rules dracut: Skipping udev rule: 60-persistent-storage-lvm.rules dracut: *** Including module: resume *** dracut: *** Including module: rootfs-block *** dracut: *** Including module: suse-btrfs *** dracut-install: ERROR: installing '/usr/share/doc/btrfsprogs/dracut-fsck-help.txt' to '/usr/share/fsck/fsck_help_btrfs.txt' dracut: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.GR4CZA/initramfs /usr/share/doc/btrfsprogs/dracut-fsck-help.txt /usr/share/fsck/fsck_help_btrfs.txt dracut: *** Including module: suse-xfs *** dracut: *** Including module: terminfo *** dracut: *** Including module: udev-rules *** dracut: Skipping udev rule: 40-redhat.rules dracut: Skipping udev rule: 50-firmware.rules dracut: Skipping udev rule: 50-udev.rules dracut: Skipping udev rule: 91-permissions.rules dracut: Skipping udev rule: 80-drivers-modprobe.rules dracut: *** Including module: dracut-systemd *** dracut: *** Including module: haveged *** dracut: *** Including module: usrmount *** dracut: *** Including module: base *** dracut: *** Including module: fs-lib *** dracut: *** Including module: shutdown *** dracut: *** Including module: suse *** dracut: *** Including modules done *** dracut: *** Installing kernel module dependencies and firmware *** dracut: *** Installing kernel module dependencies and firmware done *** dracut: *** Resolving executable dependencies *** dracut: *** Resolving executable dependencies done*** dracut: *** Hardlinking files *** dracut: *** Hardlinking files done *** dracut: *** Stripping files *** dracut: *** Stripping files done *** dracut: *** Generating early-microcode cpio image *** dracut: *** Constructing GenuineIntel.bin **** dracut: *** Store current command line parameters *** dracut: Stored kernel commandline: dracut: rd.luks.uuid=luks-3ca9e321-7a76-4dc6-9a46-8c11ac70b25e dracut: rd.lvm.lv=LVM_group/root dracut: resume=UUID=874f7a4f-4f84-4c92-a971-280b933bfea6 dracut: root=/dev/mapper/LVM_group-root rootfstype=xfs rootflags=rw,relatime,attr2,inode64,noquota dracut: *** Creating image file '/boot/initrd-4.12.14-lp151.21-default' *** dracut: *** Creating initramfs image file '/boot/initrd-4.12.14-lp151.21-default' done *** Executing %posttrans script 'grub2-i386-pc-2.02-lp151.19.2.noarch.rpm' .........................................................................<57%>===========================================================[|] Output of grub2-i386-pc-2.02-lp151.19.2.noarch.rpm %posttrans script: update-bootloader: 2019-02-27 13:20:09 <3> update-bootloader-2225 run_command.294: '/usr/lib/bootloader/grub2-efi/install' failed with exit code 1, output: <<<<<<<<<<<<<<<< target = x86_64-efi ls: cannot access '/sys/firmware/efi/efivars': No such file or directory + /usr/sbin/shim-install --config-file=/boot/grub2/grub.cfg --no-nvram --removable No valid EFI partition >>>>>>>>>>>>>>>> Executing %posttrans scripts ................................................................................................................................................................................[done] There are some running programs that might use files deleted by recent upgrade. You may wish to check and restart some of them. Run 'zypper ps -s' to list these programs. Core libraries or services have been updated. Reboot is required to ensure that your system benefits from these updates. The logs are a bit of a mess for some reason after the installation, I also unpacked some tarballs trying to find the error but no luck. Maybe someone else can have better luck. -- You are receiving this mail because: You are on the CC list for the bug.

2 14

[Bug 1177152] New: Installer fails to reboot
by bugzilla_noreply＠suse.com 07 Mar '23

07 Mar '23

https://bugzilla.suse.com/show_bug.cgi?id=1177152 Bug ID: 1177152 Summary: Installer fails to reboot Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: armv7 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Installation Assignee: yast2-maintainers(a)suse.de Reporter: msuchanek(a)suse.com QA Contact: jsrain(a)suse.com Found By: --- Blocker: --- ┌──────────────────────────────────────────────────────────────────────────────┐ │ No device(s) for installation found │ ├──────────────────────────────────────────────────────────────────────────────┤ │ < OK > │ └──────────────────────────────────────────────────────────────────────────────┘ [ OK ] Finished Dracut Run Interactive. [ 31.617660] [ 31.643346] reboot: Restarting system dracut-pre-mount[ 32.648330] Reboot failed -- System halted -- You are receiving this mail because: You are on the CC list for the bug.

1 32

[Bug 1044803] New: Default online repositories not used even if installing with network connection by default
by bugzilla_noreply＠novell.com 07 Mar '23

07 Mar '23

http://bugzilla.suse.com/show_bug.cgi?id=1044803 Bug ID: 1044803 Summary: Default online repositories not used even if installing with network connection by default Classification: openSUSE Product: openSUSE Distribution Version: Leap 42.3 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Installation Assignee: yast2-maintainers(a)suse.de Reporter: opensuse.lietuviu.kalba(a)gmail.com QA Contact: jsrain(a)suse.com Depends on: 1044741 Found By: --- Blocker: --- +++ This bug was initially created as a clone of Bug #1044741 +++ I did installation from openSUSE-Leap-42.3-DVD-x86_64-Build0279-Media.iso image and during installation there was internet connection and computer was ONLINE. But I found that it tried to use only DVD as repository... Though default online repositories (oss, non-oss, oss-updates, non-oss-updates) will be added only if I intentionally pressed to configure online repositories at dialog for computer role. If I remember good, in previous versions these four _default_ repos where enabled by default, and we had option to include _additional_ repositories. See yast2logs and screenshots in bug#1044741 -- You are receiving this mail because: You are on the CC list for the bug.

2 3

[Bug 1172465] New: transactional-update.timer fires immediately at first boot
by bugzilla_noreply＠suse.com 07 Mar '23

07 Mar '23

http://bugzilla.opensuse.org/show_bug.cgi?id=1172465 Bug ID: 1172465 Summary: transactional-update.timer fires immediately at first boot Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: MicroOS Assignee: kubic-bugs(a)opensuse.org Reporter: lnussel(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- openSUSE-MicroOS.armv7l-16.0.0-RaspberryPi2-Snapshot20200528.raw Booted and wondered why systemd-analyze wouldn't show me results. Turns out transactional-update.timer was started immediately at first boot. Maybe related to missing rtc on rpi? So the time warp caused by chrony catching up triggered it? # systemctl status transactional-update.timer * transactional-update.timer - Daily update of the system Loaded: loaded (/usr/lib/systemd/system/transactional-update.timer; enabled; vendor preset: enabled) Active: active (waiting) since Thu 2020-04-23 14:15:38 UTC; 1 months 10 days ago Trigger: Thu 2020-06-04 01:38:53 UTC; 11h left Triggers: * transactional-update.service Docs: man:transactional-update(8) If so why April 23rd rather than end of May when the image was created? # l /var/lib/chrony total 0 drwxr-x--- 1 chrony chrony 0 May 2 22:23 ./ drwxr-xr-x 1 root root 268 Jun 3 13:56 ../ Can and do we want to do something about this behavior or a matter of documentation again? -- You are receiving this mail because: You are on the CC list for the bug.

1 7

[Bug 1170344] New: Btrfsprogs 5.6 bug: kernel booting stop at "BTRFS info" output
by bugzilla_noreply＠novell.com 07 Mar '23

07 Mar '23

http://bugzilla.opensuse.org/show_bug.cgi?id=1170344 Bug ID: 1170344 Summary: Btrfsprogs 5.6 bug: kernel booting stop at "BTRFS info" output Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Critical Priority: P5 - None Component: Basesystem Assignee: screening-team-bugs(a)suse.de Reporter: hillwoodroc(a)gmail.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- I Updated My PC and laptop to Tumbleweed 20200417, then these two systems could not boot, and there is not any error on screen. I tried to chroot to get the dmesg log, I got many BTRFS notices at the end. I find Btrfsprogs was updated before 10 days ago in Factory. I guess this is a bug for Btrfsprogs. -- You are receiving this mail because: You are on the CC list for the bug.

2 18

[Bug 1166296] New: Return of Yast2-fonts
by bugzilla_noreply＠novell.com 04 Mar '23

04 Mar '23

http://bugzilla.opensuse.org/show_bug.cgi?id=1166296 Bug ID: 1166296 Summary: Return of Yast2-fonts Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.2 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 Assignee: yast2-maintainers(a)suse.de Reporter: cornelis(a)solcon.nl QA Contact: jsrain(a)suse.com Found By: --- Blocker: --- As yast2-fonts is back in TW again after a brief hiatus, would it be possible to add it again to Leap 15.2? -- You are receiving this mail because: You are on the CC list for the bug.

2 2

[Bug 1173313] New: [aarch64] jeos qcow2 image: Root device not found during virt-install boot
by bugzilla_noreply＠suse.com 03 Mar '23

03 Mar '23

http://bugzilla.opensuse.org/show_bug.cgi?id=1173313 Bug ID: 1173313 Summary: [aarch64] jeos qcow2 image: Root device not found during virt-install boot Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.2 Hardware: aarch64 OS: Other Status: NEW Severity: Major Priority: P5 - None Component: Cloud:Images Assignee: public-cloud-maintainers(a)suse.de Reporter: rrichter(a)marvell.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101 Firefox/68.0 Build Identifier: Booting today's openSUSE Leap 15.2 qcow2 image with virt-inst fails: # virsh net-start default # virt-install --transient --name opensuse --import --memory 16384 --disk /srv/vm/opensuse/openSUSE-Leap-15.2-ARM-JeOS-efi.aarch64-2020.06.16-Build1.8.qcow2 ... Loading Linux 5.3.18-lp152.18-default ... ... Welcome to openSUSE Leap 15.2 dracut-049.1+suse.144.ge0eaf296-lp152.1.1 (Initramfs)! ... [ OK ] Reached target Basic System. [ *] A start job is running for dev-disk…75ec6bc9c9.device (46s / no limit) This runs forever. Image from: https://download.opensuse.org/ports/aarch64/distribution/leap/15.2/applianc… Using a customized kernel and initrd made the image boot: + virt-install --transient --name 5.7.0-virt-01309-g9046fbbe2919 --boot 'uefi,kernel=/boot/Image-5.7.0-virt-01309-g9046fbbe2919,initrd=/boot/initrd-5.7.0-virt-01309-g9046fbbe2919,kernel_args=root=/dev/sda3 ro console=ttyS0,115200n8 no_timer_check net.ifnames=0 crashkernel=auto rd.shell rd.debug log_buf_len=1M' --memory 16384 --disk /srv/vm/opensuse/openSUSE-Leap-15.2-ARM-JeOS-efi.aarch64-2020.06.16-Build1.8.qcow2 After applying dracut in the guest the original image could be booted too (with the above command line): # dracut -f /boot/initrd-5.3.18-lp152.18-default 5.3.18-lp152.18-default Though, during boot there is a long timeout of about 15 mins (which are not seen with the custom kernel, time varies): [ 915.761207] cloud-init[533]: Cloud-init v. 19.4 running 'init-local' at Wed, 24 Jun 2020 13:12:32 +0000. Up 900.51 seconds. Reproducible: Always Steps to Reproduce: See above. Actual Results: Root device is not found, no root fs. Systemd start job hangs forever: [ *] A start job is running for dev-disk…75ec6bc9c9.device (46s / no limit) Expected Results: System is booted to the prompt: Welcome to openSUSE Leap 15.2 - Kernel 5.3.18-lp152.18-default (ttyAMA0). sbr2s-27 login: Details on the host (Marvell CN99xx): sbr2s-27:~ # cat /etc/os-release NAME="SLES" VERSION="15-SP1" VERSION_ID="15.1" PRETTY_NAME="SUSE Linux Enterprise Server 15 SP1" ID="sles" ID_LIKE="suse" ANSI_COLOR="0;32" CPE_NAME="cpe:/o:suse:sles:15:sp1" sbr2s-27:~ # uname -a Linux sbr2s-27 5.3.18-50.g39d1ea9-default #1 SMP Sun Apr 5 19:41:26 UTC 2020 (39d1ea9) aarch64 aarch64 aarch64 GNU/Linux sbr2s-27:~ # dmidecode -t 0 # dmidecode 3.2 Getting SMBIOS data from sysfs. SMBIOS 3.1.1 present. Handle 0x0000, DMI type 0, 26 bytes BIOS Information Vendor: EDK II Version: 0ACKL029 Release Date: 02/21/2020 Address: 0xF0000 Runtime Size: 64 kB ROM Size: 64 MB Characteristics: PCI is supported BIOS is upgradeable BIOS shadowing is allowed Boot from CD is supported Selectable boot is supported BIOS ROM is socketed ACPI is supported BIOS boot specification is supported Targeted content distribution is supported UEFI is supported BIOS Revision: 7.4 sbr2s-27:~ # dmidecode -t 1 # dmidecode 3.2 Getting SMBIOS data from sysfs. SMBIOS 3.1.1 present. Handle 0x0001, DMI type 1, 27 bytes System Information Manufacturer: To be filled by O.E.M. Product Name: Saber Version: 1.0 Serial Number: To be filled by O.E.M. UUID: 6b7bd980-bfde-1000-03f5-e0d55e60f6d4 Wake-up Type: Power Switch SKU Number: SABER SKU Family: CN99XX Systemd log showing boot timing: Jun 24 12:57:39 sbr2s-27 systemd[1]: Started Apply settings from /etc/sysconfig/keyboard. Jun 24 13:07:32 sbr2s-27 systemd[1]: Started Daily Cleanup of Snapper Snapshots. Jun 24 13:07:32 sbr2s-27 dbus-daemon[527]: [system] Activating service name='org.opensuse.Snapper' requested by ':1.2' (uid=0 pid=589 comm="/usr/lib/snapper/systemd-helper --cleanup ") (using servicehelper) Jun 24 13:07:32 sbr2s-27 dbus-daemon[527]: [system] Successfully activated service 'org.opensuse.Snapper' Jun 24 13:07:32 sbr2s-27 systemd-helper[589]: running number cleanup for 'root'. Jun 24 13:07:32 sbr2s-27 systemd-helper[589]: running timeline cleanup for 'root'. Jun 24 13:07:32 sbr2s-27 systemd-helper[589]: running empty-pre-post cleanup for 'root'. Jun 24 13:12:32 sbr2s-27 kernel: random: crng init done Jun 24 13:12:32 sbr2s-27 kernel: random: 7 urandom warning(s) missed due to ratelimiting Jun 24 13:12:32 sbr2s-27 dhclient[600]: Internet Systems Consortium DHCP Client 4.3.6-P1 Jun 24 13:12:32 sbr2s-27 dhclient[600]: Copyright 2004-2018 Internet Systems Consortium. Jun 24 13:12:32 sbr2s-27 dhclient[600]: All rights reserved. Jun 24 13:12:32 sbr2s-27 dhclient[600]: For info, please visit https://www.isc.org/software/dhcp/ Jun 24 13:12:32 sbr2s-27 dhclient[600]: Jun 24 13:12:32 sbr2s-27 dhclient[600]: Listening on LPF/eth0/52:54:00:d7:71:f6 Jun 24 13:12:32 sbr2s-27 dhclient[600]: Sending on LPF/eth0/52:54:00:d7:71:f6 Jun 24 13:12:32 sbr2s-27 dhclient[600]: Sending on Socket/fallback Jun 24 13:12:32 sbr2s-27 dhclient[600]: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3 (xid=0x371dbcf6) Jun 24 13:12:32 sbr2s-27 dhclient[600]: DHCPOFFER from 192.168.122.1 Jun 24 13:12:32 sbr2s-27 kernel: NET: Registered protocol family 17 Jun 24 13:12:37 sbr2s-27 dhclient[600]: DHCPREQUEST on eth0 to 255.255.255.255 port 67 (xid=0x371dbcf6) Jun 24 13:12:37 sbr2s-27 dhclient[600]: DHCPACK from 192.168.122.1 (xid=0x371dbcf6) Jun 24 13:12:37 sbr2s-27 dhclient[600]: bound to 192.168.122.196 -- renewal in 1631 seconds. Jun 24 13:12:47 sbr2s-27 cloud-init[533]: Cloud-init v. 19.4 running 'init-local' at Wed, 24 Jun 2020 13:12:32 +0000. Up 900.51 seconds. Jun 24 13:12:47 sbr2s-27 cloud-init[533]: 2020-06-24 13:12:47,783 - util.py[WARNING]: No active metadata service found Jun 24 13:12:47 sbr2s-27 systemd[1]: Started Initial cloud-init job (pre-networking). Jun 24 13:12:47 sbr2s-27 systemd[1]: Reached target Network (Pre). Jun 24 13:12:47 sbr2s-27 systemd[1]: Starting wicked AutoIPv4 supplicant service... Jun 24 13:12:47 sbr2s-27 systemd[1]: Starting wicked DHCPv4 supplicant service... Jun 24 13:12:47 sbr2s-27 systemd[1]: Starting wicked DHCPv6 supplicant service... Jun 24 13:12:48 sbr2s-27 systemd[1]: Started wicked DHCPv6 supplicant service. Jun 24 13:12:48 sbr2s-27 systemd[1]: Started wicked AutoIPv4 supplicant service. Jun 24 13:12:48 sbr2s-27 systemd[1]: Started wicked DHCPv4 supplicant service. Jun 24 13:12:48 sbr2s-27 systemd[1]: Starting wicked network management service daemon... Jun 24 13:12:48 sbr2s-27 systemd[1]: Started wicked network management service daemon. Jun 24 13:12:48 sbr2s-27 systemd[1]: Starting wicked network nanny service... Jun 24 13:12:48 sbr2s-27 systemd[1]: Started wicked network nanny service. Jun 24 13:12:48 sbr2s-27 systemd[1]: Starting wicked managed network interfaces... Jun 24 13:12:48 sbr2s-27 wickedd-dhcp4[622]: eth0: Request to acquire DHCPv4 lease with UUID 5051f35e-40a5-0300-7002-000004000000 Jun 24 13:12:48 sbr2s-27 wickedd-dhcp4[622]: eth0: Committed DHCPv4 lease with address 192.168.122.34 (lease time 3600 sec, renew in 1800 sec, rebind in 3150 sec) Jun 24 13:12:53 sbr2s-27 wicked[628]: lo up Jun 24 13:12:53 sbr2s-27 wicked[628]: eth0 up Jun 24 13:12:53 sbr2s-27 systemd[1]: Started wicked managed network interfaces. Jun 24 13:12:53 sbr2s-27 systemd[1]: Starting Initial cloud-init job (metadata service crawler)... Jun 24 13:12:53 sbr2s-27 systemd[1]: Reached target Network. Jun 24 13:12:53 sbr2s-27 systemd[1]: Starting NTP client/server... Jun 24 13:12:53 sbr2s-27 chronyd[1045]: chronyd version 3.2 starting (+CMDMON +NTP +REFCLOCK +RTC +PRIVDROP -SCFILTER +SECHASH -SIGND +ASYNCDNS +IPV6 -DEBUG) Jun 24 13:12:53 sbr2s-27 chronyd[1045]: Frequency -104.991 +/- 2.220 ppm read from /var/lib/chrony/drift Jun 24 13:12:53 sbr2s-27 systemd[1]: Started NTP client/server. Jun 24 13:12:53 sbr2s-27 systemd[1]: Reached target System Time Synchronized. Jun 24 13:12:53 sbr2s-27 systemd[1]: Started Discard unused blocks once a week. Jun 24 13:12:53 sbr2s-27 systemd[1]: Started Backup of /etc/sysconfig. Jun 24 13:12:53 sbr2s-27 systemd[1]: Started Check if mainboard battery is Ok. Jun 24 13:12:53 sbr2s-27 systemd[1]: Started Backup of RPM database. Jun 24 13:12:53 sbr2s-27 systemd[1]: Starting Cleanup of Temporary Directories... Jun 24 13:12:53 sbr2s-27 systemd[1]: Started Daily rotation of log files. Jun 24 13:12:53 sbr2s-27 systemd[1]: Started Timeline of Snapper Snapshots. Jun 24 13:12:53 sbr2s-27 systemd[1]: Reached target Timers. Jun 24 13:12:53 sbr2s-27 systemd-tmpfiles[1071]: [/usr/lib/tmpfiles.d/tmp.conf:13] Duplicate line for path "/var/tmp", ignoring. Jun 24 13:12:53 sbr2s-27 systemd-tmpfiles[1071]: [/usr/lib/tmpfiles.d/var.conf:21] Duplicate line for path "/var/lib", ignoring. Jun 24 13:12:53 sbr2s-27 systemd-tmpfiles[1071]: [/usr/lib/tmpfiles.d/var.conf:23] Duplicate line for path "/var/spool", ignoring. Jun 24 13:12:54 sbr2s-27 systemd[1]: Started Cleanup of Temporary Directories. Jun 24 13:13:04 sbr2s-27 cloud-init[1042]: Cloud-init v. 19.4 running 'init' at Wed, 24 Jun 2020 13:12:54 +0000. Up 922.48 seconds. Jun 24 13:13:04 sbr2s-27 cloud-init[1042]: ci-info: ++++++++++++++++++++++++++++++++++++++Net device info++++++++++++++++++++++++++++++++++++++ Jun 24 13:13:04 sbr2s-27 cloud-init[1042]: ci-info: +--------+------+----------------------------+---------------+--------+-------------------+ Jun 24 13:13:04 sbr2s-27 cloud-init[1042]: ci-info: | Device | Up | Address | Mask | Scope | Hw-Address | Jun 24 13:13:04 sbr2s-27 cloud-init[1042]: ci-info: +--------+------+----------------------------+---------------+--------+-------------------+ Jun 24 13:13:04 sbr2s-27 cloud-init[1042]: ci-info: | eth0 | True | 192.168.122.34 | 255.255.255.0 | global | 52:54:00:d7:71:f6 | Jun 24 13:13:04 sbr2s-27 cloud-init[1042]: ci-info: | eth0 | True | fe80::5054:ff:fed7:71f6/64 | . | link | 52:54:00:d7:71:f6 | Jun 24 13:13:04 sbr2s-27 cloud-init[1042]: ci-info: | lo | True | 127.0.0.1 | 255.0.0.0 | host | . | Jun 24 13:13:04 sbr2s-27 cloud-init[1042]: ci-info: | lo | True | ::1/128 | . | host | . | Jun 24 13:13:04 sbr2s-27 cloud-init[1042]: ci-info: +--------+------+----------------------------+---------------+--------+-------------------+ Jun 24 13:13:04 sbr2s-27 cloud-init[1042]: ci-info: +++++++++++++++++++++++++++++++Route IPv4 info+++++++++++++++++++++++++++++++ Jun 24 13:13:04 sbr2s-27 cloud-init[1042]: ci-info: +-------+---------------+---------------+---------------+-----------+-------+ Jun 24 13:13:04 sbr2s-27 cloud-init[1042]: ci-info: | Route | Destination | Gateway | Genmask | Interface | Flags | Jun 24 13:13:04 sbr2s-27 cloud-init[1042]: ci-info: +-------+---------------+---------------+---------------+-----------+-------+ Jun 24 13:13:04 sbr2s-27 cloud-init[1042]: ci-info: | 0 | 0.0.0.0 | 192.168.122.1 | 0.0.0.0 | eth0 | UG | Jun 24 13:13:04 sbr2s-27 cloud-init[1042]: ci-info: | 1 | 192.168.122.0 | 0.0.0.0 | 255.255.255.0 | eth0 | U | Jun 24 13:13:04 sbr2s-27 cloud-init[1042]: ci-info: +-------+---------------+---------------+---------------+-----------+-------+ Jun 24 13:13:04 sbr2s-27 cloud-init[1042]: ci-info: +++++++++++++++++++Route IPv6 info+++++++++++++++++++ Jun 24 13:13:04 sbr2s-27 cloud-init[1042]: ci-info: +-------+-------------+---------+-----------+-------+ Jun 24 13:13:04 sbr2s-27 cloud-init[1042]: ci-info: | Route | Destination | Gateway | Interface | Flags | Jun 24 13:13:04 sbr2s-27 cloud-init[1042]: ci-info: +-------+-------------+---------+-----------+-------+ Jun 24 13:13:04 sbr2s-27 cloud-init[1042]: ci-info: | 1 | fe80::/64 | :: | eth0 | U | Jun 24 13:13:04 sbr2s-27 cloud-init[1042]: ci-info: | 3 | local | :: | eth0 | U | Jun 24 13:13:04 sbr2s-27 cloud-init[1042]: ci-info: | 4 | ff00::/8 | :: | eth0 | U | Jun 24 13:13:04 sbr2s-27 cloud-init[1042]: ci-info: +-------+-------------+---------+-----------+-------+ Jun 24 13:13:04 sbr2s-27 cloud-init[1042]: 2020-06-24 13:13:04,683 - util.py[WARNING]: No active metadata service found Jun 24 13:13:05 sbr2s-27 kernel: BTRFS info (device sda3): new size for /dev/sda3 is 1289728000 Jun 24 13:13:05 sbr2s-27 systemd[1]: Started Initial cloud-init job (metadata service crawler). Jun 24 13:13:05 sbr2s-27 systemd[1]: Starting Permit User Sessions... Jun 24 13:13:05 sbr2s-27 systemd[1]: Reached target Network is Online. Jun 24 13:13:05 sbr2s-27 systemd[1]: Starting OpenSSH Daemon... Jun 24 13:13:05 sbr2s-27 systemd[1]: Reached target Cloud-config availability. Jun 24 13:13:05 sbr2s-27 sshd-gen-keys-start[1118]: Checking for missing server keys in /etc/ssh Jun 24 13:13:05 sbr2s-27 systemd[1]: Starting Apply the settings specified in cloud-config... Jun 24 13:13:05 sbr2s-27 systemd[1]: Started Permit User Sessions. Jun 24 13:13:05 sbr2s-27 sshd[1122]: Server listening on 0.0.0.0 port 22. Jun 24 13:13:05 sbr2s-27 sshd[1122]: Server listening on :: port 22. Jun 24 13:13:05 sbr2s-27 systemd[1]: Started OpenSSH Daemon. Jun 24 13:13:05 sbr2s-27 systemd[1]: Started Getty on tty1. Jun 24 13:13:05 sbr2s-27 systemd[1]: Started Serial Getty on ttyAMA0. Jun 24 13:13:05 sbr2s-27 systemd[1]: Reached target Login Prompts. Jun 24 13:13:05 sbr2s-27 systemd[1]: Reached target Multi-User System. Jun 24 13:13:05 sbr2s-27 systemd[1]: Reached target Graphical Interface. Jun 24 13:13:05 sbr2s-27 systemd[1]: Starting Update UTMP about System Runlevel Changes... Jun 24 13:13:05 sbr2s-27 systemd[1]: Started Update UTMP about System Runlevel Changes. Jun 24 13:13:06 sbr2s-27 cloud-init[1120]: Cloud-init v. 19.4 running 'modules:config' at Wed, 24 Jun 2020 13:13:06 +0000. Up 933.97 seconds. Jun 24 13:13:06 sbr2s-27 systemd[1]: Started Apply the settings specified in cloud-config. Jun 24 13:13:06 sbr2s-27 systemd[1]: Starting Execute cloud user/final scripts... Jun 24 13:13:06 sbr2s-27 cloud-init[1133]: Cloud-init v. 19.4 running 'modules:final' at Wed, 24 Jun 2020 13:13:06 +0000. Up 934.77 seconds. Jun 24 13:13:06 sbr2s-27 cloud-init[1133]: Cloud-init v. 19.4 finished at Wed, 24 Jun 2020 13:13:06 +0000. Datasource DataSourceNone. Up 934.87 seconds Jun 24 13:13:06 sbr2s-27 cloud-init[1133]: 2020-06-24 13:13:06,909 - cc_final_message.py[WARNING]: Used fallback datasource Jun 24 13:13:06 sbr2s-27 systemd[1]: Started Execute cloud user/final scripts. Jun 24 13:13:06 sbr2s-27 systemd[1]: Reached target Cloud-init target. Jun 24 13:13:06 sbr2s-27 systemd[1]: Startup finished in 1.505s (kernel) + 4.647s (initrd) + 15min 28.807s (userspace) = 15min 34.961s. Jun 24 13:13:41 sbr2s-27 sshd[1142]: Accepted keyboard-interactive/pam for root from 192.168.122.1 port 42104 ssh2 Jun 24 13:13:41 sbr2s-27 systemd-logind[531]: New session 1 of user root. Jun 24 13:13:41 sbr2s-27 systemd[1]: Created slice User Slice of UID 0. Jun 24 13:13:41 sbr2s-27 systemd[1]: Starting User Manager for UID 0... Jun 24 13:13:41 sbr2s-27 systemd[1]: Started Session 1 of user root. Jun 24 13:13:41 sbr2s-27 systemd[1145]: pam_unix(systemd-user:session): session opened for user root by (uid=0) Jun 24 13:13:41 sbr2s-27 systemd[1145]: Reached target Paths. Jun 24 13:13:41 sbr2s-27 systemd[1145]: Reached target Timers. Jun 24 13:13:41 sbr2s-27 systemd[1145]: Starting D-Bus User Message Bus Socket. Jun 24 13:13:41 sbr2s-27 systemd[1145]: Listening on D-Bus User Message Bus Socket. Jun 24 13:13:41 sbr2s-27 systemd[1145]: Reached target Sockets. Jun 24 13:13:41 sbr2s-27 systemd[1145]: Reached target Basic System. Jun 24 13:13:41 sbr2s-27 systemd[1]: Started User Manager for UID 0. Jun 24 13:13:41 sbr2s-27 sshd[1142]: pam_unix(sshd:session): session opened for user root by (uid=0) Jun 24 13:13:41 sbr2s-27 systemd[1145]: Reached target Default. Jun 24 13:13:41 sbr2s-27 systemd[1145]: Startup finished in 52ms. Additional issue seen: [FAILED] Failed to start Load Kernel Modules. See 'systemctl status systemd-modules-load.service' for details. This is due to multipath-tools package: sbr2s-27:~ # systemctl status systemd-modules-load ● systemd-modules-load.service - Load Kernel Modules Loaded: loaded (/usr/lib/systemd/system/systemd-modules-load.service; static; vendor preset: disabled) Active: failed (Result: exit-code) since Wed 2020-06-24 12:57:39 UTC; 24min ago Docs: man:systemd-modules-load.service(8) man:modules-load.d(5) Process: 480 ExecStart=/usr/lib/systemd/systemd-modules-load (code=exited, status=1/FAILURE) Main PID: 480 (code=exited, status=1/FAILURE) Jun 24 12:57:39 sbr2s-27 systemd[1]: Starting Load Kernel Modules... Jun 24 12:57:39 sbr2s-27 systemd-modules-load[480]: Failed to find module 'scsi_dh_alua' Jun 24 12:57:39 sbr2s-27 systemd-modules-load[480]: Failed to find module 'scsi_dh_emc' Jun 24 12:57:39 sbr2s-27 systemd-modules-load[480]: Failed to find module 'scsi_dh_rdac' Jun 24 12:57:39 sbr2s-27 systemd-modules-load[480]: Failed to find module 'dm-multipath' Jun 24 12:57:39 sbr2s-27 systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE Jun 24 12:57:39 sbr2s-27 systemd[1]: Failed to start Load Kernel Modules. Jun 24 12:57:39 sbr2s-27 systemd[1]: systemd-modules-load.service: Unit entered failed state. Jun 24 12:57:39 sbr2s-27 systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'. sbr2s-27:~ # cat /usr/lib/modules-load.d/multipath.conf # Load device-handler and multipath module at boot scsi_dh_alua scsi_dh_emc scsi_dh_rdac dm-multipath sbr2s-27:~ # rpm -qf /usr/lib/modules-load.d/multipath.conf multipath-tools-0.8.2+18.9ff73e7-lp152.2.1.aarch64 sbr2s-27:~ # find /lib/modules/ -name '*dm-multipath*' It does not have impact to the boot issue. -- You are receiving this mail because: You are on the CC list for the bug.

1 13

[Bug 1116889] New: windows:mingw:win32/mingw32-cross-gcc: Bug / Installation size is huge (unstripped exes?)
by bugzilla_noreply＠novell.com 02 Mar '23

02 Mar '23

http://bugzilla.opensuse.org/show_bug.cgi?id=1116889 Bug ID: 1116889 Summary: windows:mingw:win32/mingw32-cross-gcc: Bug / Installation size is huge (unstripped exes?) Classification: openSUSE Product: openSUSE.org Version: unspecified Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: 3rd party software Assignee: fstrba(a)suse.com Reporter: sergei.ivn+bugzilla(a)gmail.com QA Contact: bnc-team-screening(a)forge.provo.novell.com CC: fridrich.strba(a)bluewin.ch, hib(a)hiberis.nl, idonmez(a)suse.com, mkbosmans(a)gmail.com, tlillqvist(a)suse.com Found By: --- Blocker: --- (second attempt) Hi. I'm using opensuse tumbleweed on a remote CI server for building some of my windows project. And since the container size is huge I did some investigations and it turns out that execs size for mingw32-cross-{gcc,cpp,gcc-c++} is very big, for instance the size of the cc1 executable is over 200 megabytes. I'm myself is on windows so my possibilities are limited, but the msys2 file utility said that the exec files contain some debug info. (bugzilla prefilled cc:alan@xamarin.com breaks the report attempt) -- You are receiving this mail because: You are on the CC list for the bug.

2 9

[Bug 1135212] New: LTO: libqt5-qtwebkit build fails
by bugzilla_noreply＠novell.com 28 Feb '23

28 Feb '23

http://bugzilla.opensuse.org/show_bug.cgi?id=1135212 Bug ID: 1135212 Summary: LTO: libqt5-qtwebkit build fails Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: martin.liska(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Fails here: https://build.opensuse.org/package/live_build_log/openSUSE:Factory:Staging:… with: [ 2250s] /home/abuild/rpmbuild/BUILD/qtwebkit-5.212.0-alpha2/Source/JavaScriptCore/interpreter/CallFrame.cpp:200: undefined reference to `vmEntryRecord' [ 2250s] /usr/lib64/gcc/x86_64-suse-linux/9/../../../../x86_64-suse-linux/bin/ld: /home/abuild/rpmbuild/BUILD/qtwebkit-5.212.0-alpha2/Source/JavaScriptCore/interpreter/CallFrame.cpp:200: undefined reference to `vmEntryRecord' [ 2250s] /usr/lib64/gcc/x86_64-suse-linux/9/../../../../x86_64-suse-linux/bin/ld: /tmp/testair.Ki1BSG.ltrans38.ltrans.o: in function `JSC::construct(JSC::ExecState*, JSC::JSValue, JSC::ConstructType, JSC::ConstructData const&, JSC::ArgList const&, JSC::JSValue)': [ 2250s] /home/abuild/rpmbuild/BUILD/qtwebkit-5.212.0-alpha2/Source/JavaScriptCore/interpreter/Interpreter.cpp:1106: undefined reference to `vmEntryToNative' [ 2250s] /usr/lib64/gcc/x86_64-suse-linux/9/../../../../x86_64-suse-linux/bin/ld: /tmp/testair.Ki1BSG.ltrans38.ltrans.o: in function `JSC::call(JSC::ExecState*, JSC::JSValue, JSC::CallType, JSC::CallData const&, JSC::JSValue, JSC::ArgList const&)': [ 2250s] /home/abuild/rpmbuild/BUILD/qtwebkit-5.212.0-alpha2/Source/JavaScriptCore/interpreter/Interpreter.cpp:1036: undefined reference to `vmEntryToNative' [ 2250s] /usr/lib64/gcc/x86_64-suse-linux/9/../../../../x86_64-suse-linux/bin/ld: /tmp/testair.Ki1BSG.ltrans54.ltrans.o: in function `JSC::Debugger::stepOutOfFunction()': [ 2250s] /home/abuild/rpmbuild/BUILD/qtwebkit-5.212.0-alpha2/Source/JavaScriptCore/interpreter/CallFrame.cpp:200: undefined reference to `vmEntryRecord' [ 2250s] /usr/lib64/gcc/x86_64-suse-linux/9/../../../../x86_64-suse-linux/bin/ld: /tmp/testair.Ki1BSG.ltrans54.ltrans.o: in function `JSC::Debugger::didExecuteProgram(JSC::ExecState*)': [ 2250s] /home/abuild/rpmbuild/BUILD/qtwebkit-5.212.0-alpha2/Source/JavaScriptCore/interpreter/CallFrame.cpp:200: undefined reference to `vmEntryRecord' ... -- You are receiving this mail because: You are on the CC list for the bug.

2 4