https://bugzilla.suse.com/show_bug.cgi?id=1177152
https://bugzilla.suse.com/show_bug.cgi?id=1177152#c10
--- Comment #10 from Michal Suchanek ---
--- instal.dmesg 2020-10-01 13:05:22.457921724 +0200
+++ raw.dmesg 2020-10-01 13:05:54.962384079 +0200
@@ -6,7 +6,7 @@
OF: fdt: Machine model: Xunlong Orange Pi Zero
Memory policy: Data cache writealloc
efi: EFI v2.80 by Das U-Boot
-efi: RTPROP=0x5af3f040 SMBIOS=0x5af3b000 MEMRESERVE=0x50bb4040
+efi: RTPROP=0x5af4a040 SMBIOS=0x5af46000 MEMRESERVE=0x511ef040
efi: [Firmware Bug]: ExitBootServices() returned with MMU and Dcache disabled,
please fix your firmware!
efi: CPSR at EFI stub entry : 0x600001da
efi: SCTLR at EFI stub entry : 0x30c5087d
@@ -19,21 +19,23 @@
HighMem empty
Movable zone start for each node
Early memory node ranges
- node 0: [mem 0x0000000040000000-0x000000005aef7fff]
- node 0: [mem 0x000000005aef8000-0x000000005aef9fff]
- node 0: [mem 0x000000005aefa000-0x000000005af35fff]
- node 0: [mem 0x000000005af36000-0x000000005af39fff]
- node 0: [mem 0x000000005af3a000-0x000000005af3afff]
- node 0: [mem 0x000000005af3b000-0x000000005af3bfff]
- node 0: [mem 0x000000005af3c000-0x000000005af3dfff]
- node 0: [mem 0x000000005af3e000-0x000000005af41fff]
- node 0: [mem 0x000000005af42000-0x000000005af42fff]
- node 0: [mem 0x000000005af43000-0x000000005af46fff]
- node 0: [mem 0x000000005af47000-0x000000005af47fff]
- node 0: [mem 0x000000005af48000-0x000000005af59fff]
- node 0: [mem 0x000000005af5a000-0x000000005af5afff]
- node 0: [mem 0x000000005af5b000-0x000000005af5bfff]
- node 0: [mem 0x000000005af5c000-0x000000005ff83fff]
+ node 0: [mem 0x0000000040000000-0x000000005ae56fff]
+ node 0: [mem 0x000000005ae57000-0x000000005ae58fff]
+ node 0: [mem 0x000000005ae59000-0x000000005af3dfff]
+ node 0: [mem 0x000000005af3e000-0x000000005af44fff]
+ node 0: [mem 0x000000005af45000-0x000000005af45fff]
+ node 0: [mem 0x000000005af46000-0x000000005af46fff]
+ node 0: [mem 0x000000005af47000-0x000000005af48fff]
+ node 0: [mem 0x000000005af49000-0x000000005af4cfff]
+ node 0: [mem 0x000000005af4d000-0x000000005af4dfff]
+ node 0: [mem 0x000000005af4e000-0x000000005af52fff]
+ node 0: [mem 0x000000005af53000-0x000000005af53fff]
+ node 0: [mem 0x000000005af54000-0x000000005af54fff]
+ node 0: [mem 0x000000005af55000-0x000000005af55fff]
+ node 0: [mem 0x000000005af56000-0x000000005af56fff]
+ node 0: [mem 0x000000005af57000-0x000000005af58fff]
+ node 0: [mem 0x000000005af59000-0x000000005af59fff]
+ node 0: [mem 0x000000005af5a000-0x000000005ff83fff]
node 0: [mem 0x000000005ff84000-0x000000005ff84fff]
node 0: [mem 0x000000005ff85000-0x000000005ffc6fff]
node 0: [mem 0x000000005ffc7000-0x000000005ffc9fff]
@@ -49,11 +51,11 @@
pcpu-alloc: s55500 r8192 d22324 u86016 alloc=21*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists, mobility grouping on. Total pages: 129920
-Kernel command line: BOOT_IMAGE=(tftp)/Tumbleweed/vmlinuz
install=http://download.opensuse.org/ports/armv7hl/tumbleweed/repo/oss/
console=ttyS0,115200 loglevel=6 earlyprintk=serial rd.break=pre-mount
+Kernel command line: BOOT_IMAGE=/boot/zImage-5.8.7-1-default
root=UUID=06d94887-57d7-42e1-9c84-0d80a5f97500 rw loglevel=3 splash=silent
plymouth.enable=0
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
mem auto-init: stack:off, heap alloc:off, heap free:off
-Memory: 384672K/524288K available (13312K kernel code, 1585K rwdata, 9476K
rodata, 2048K init, 4923K bss, 74080K reserved, 65536K cma-reserved, 0K
highmem)
+Memory: 391512K/524288K available (13312K kernel code, 1585K rwdata, 9476K
rodata, 2048K init, 4923K bss, 67240K reserved, 65536K cma-reserved, 0K
highmem)
random: get_random_u32 called from kmem_cache_open+0x30/0x26c with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
ftrace: allocating 48497 entries in 95 pages
@@ -75,6 +77,7 @@
sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Switching to timer-based delay loop, resolution 41ns
Console: colour dummy device 80x30
+printk: console [tty0] enabled
Calibrating delay loop (skipped), value calculated using timer frequency..
48.00 BogoMIPS (lpj=120000)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
@@ -112,7 +115,7 @@
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.035:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor ladder
cpuidle: using governor menu
No ATAGs?
@@ -149,7 +152,7 @@
NET: Registered protocol family 44
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
-Freeing initrd memory: 36172K
+Freeing initrd memory: 29312K
hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Initialise system trusted keyrings
workingset: timestamp_bits=14 max_order=17 bucket_order=3
@@ -165,7 +168,6 @@
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
sun8i-h3-pinctrl 1c20800.pinctrl: supply vcc-pa not found, using dummy
regulator
-printk: console [ttyS0] disabled
1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 38, base_baud = 1500000) is a
16550A
printk: console [ttyS0] enabled
Serial: AMBA driver
@@ -174,7 +176,7 @@
libphy: Fixed MDIO Bus: probed
mousedev: PS/2 mouse device common for all mice
sun6i-rtc 1f00000.rtc: registered as rtc0
-sun6i-rtc 1f00000.rtc: setting system clock to 1970-01-01T15:51:28 UTC (57088)
+sun6i-rtc 1f00000.rtc: setting system clock to 1970-01-01T16:04:47 UTC (57887)
sun6i-rtc 1f00000.rtc: RTC enabled
ledtrig-cpu: registered to indicate activity on CPUs
hid: raw HID events driver (C) Jiri Kosina
@@ -211,9 +213,8 @@
with environment:
HOME=/
TERM=linux
- BOOT_IMAGE=(tftp)/Tumbleweed/vmlinuz
- install=http://download.opensuse.org/ports/armv7hl/tumbleweed/repo/oss/
- earlyprintk=serial
+ BOOT_IMAGE=/boot/zImage-5.8.7-1-default
+ splash=silent
systemd[1]: System time before build time, advancing clock.
systemd[1]: systemd 246.4+suse.20.gf1344d5b7f running in system mode. (+PAM
+AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT
+GNUTLS +ACL +XZ +LZ4 -ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2
default-hierarchy=hybrid)
systemd[1]: Detected architecture arm.
@@ -222,13 +223,11 @@
systemd[1]: Set hostname to <localhost>.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Initializing machine ID from random generator.
-random: ln: uninitialized urandom read (6 bytes read)
-systemd[139]: /usr/lib/systemd/system-generators/dracut-kiwi-ramdisk-generator
failed with exit status 1.
systemd[1]: Queued start job for default target Initrd Default Target.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
+random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Reached target Local Encrypted Volumes.
-systemd[1]: Reached target Initrd Root Device.
systemd[1]: Reached target Local File Systems.
systemd[1]: Reached target Paths.
systemd[1]: Reached target Slices.
@@ -253,13 +252,15 @@
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Starting Create Static Device Nodes in /dev...
+systemd[1]: Finished Apply Kernel Variables.
+systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Started Journal Service.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised:
dm-devel@redhat.com
raid6: neonx8 gen() 584 MB/s
raid6: neonx8 xor() 491 MB/s
-raid6: neonx4 gen() 889 MB/s
-raid6: neonx4 xor() 679 MB/s
+raid6: neonx4 gen() 888 MB/s
+raid6: neonx4 xor() 663 MB/s
raid6: neonx2 gen() 888 MB/s
raid6: neonx2 xor() 646 MB/s
raid6: neonx1 gen() 777 MB/s
@@ -272,22 +273,27 @@
raid6: int32x2 xor() 170 MB/s
raid6: int32x1 gen() 328 MB/s
raid6: int32x1 xor() 164 MB/s
-raid6: using algorithm neonx4 gen() 889 MB/s
-raid6: .... xor() 679 MB/s, rmw enabled
+raid6: using algorithm neonx2 gen() 888 MB/s
+raid6: .... xor() 646 MB/s, rmw enabled
raid6: using neon recovery algorithm
xor: measuring software checksum speed
- arm4regs : 1243.200 MB/sec
+ arm4regs : 1242.400 MB/sec
8regs : 760.800 MB/sec
32regs : 799.200 MB/sec
neon : 1244.000 MB/sec
xor: using function: neon (1244.000 MB/sec)
Btrfs loaded, crc32c=crc32c-generic, assert=on
-random: fast init done
sun8i-h3-r-pinctrl 1f02c00.pinctrl: supply vcc-pl not found, using dummy
regulator
sun8i-h3-pinctrl 1c20800.pinctrl: supply vcc-pf not found, using dummy
regulator
+sunxi-mmc 1c0f000.mmc: Got CD GPIO
+sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB
+sun8i-h3-pinctrl 1c20800.pinctrl: supply vcc-pg not found, using dummy
regulator
+random: fast init done
+sunxi-mmc 1c10000.mmc: allocated mmc-pwrseq
sun8i-ce 1c15000.crypto: Set mod clock to 50000000 (50 Mhz) from 24000000 (24
Mhz)
sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
-sunxi-mmc 1c0f000.mmc: Got CD GPIO
+mmc0: host does not support reading read-only switch, assuming write-enable
+mmc0: new high speed SDHC card at address aaaa
sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
@@ -296,62 +302,160 @@
sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
sun8i-ce 1c15000.crypto: CryptoEngine Die ID 1
-sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB
-sun8i-h3-pinctrl 1c20800.pinctrl: supply vcc-pg not found, using dummy
regulator
-sunxi-mmc 1c10000.mmc: allocated mmc-pwrseq
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
-ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
-sunxi-mmc 1c10000.mmc: initialized, max. request size: 16384 KB
-ohci-platform: OHCI generic platform driver
-ohci-platform 1c1a400.usb: Generic Platform OHCI controller
-ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 1
-ohci-platform 1c1a400.usb: irq 29, io mem 0x01c1a400
-mmc1: new high speed SDIO card at address 0001
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
-Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not
after
-usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.08
-usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
-usb usb1: Product: Generic Platform OHCI controller
-usb usb1: Manufacturer: Linux 5.8.7-1-default ohci_hcd
-usb usb1: SerialNumber: 1c1a400.usb
-hub 1-0:1.0: USB hub found
-hub 1-0:1.0: 1 port detected
-ohci-platform 1c1b400.usb: Generic Platform OHCI controller
-ohci-platform 1c1b400.usb: new USB bus registered, assigned bus number 2
-ohci-platform 1c1b400.usb: irq 31, io mem 0x01c1b400
ehci-platform: EHCI generic platform driver
ehci-platform 1c1a000.usb: EHCI Host Controller
-ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 3
-ehci-platform 1c1a000.usb: irq 28, io mem 0x01c1a000
-usb_phy_generic usb_phy_generic.1.auto: supply vcc not found, using dummy
regulator
+ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 1
+ehci-platform 1c1a000.usb: irq 27, io mem 0x01c1a000
ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00
-usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.08
+usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
+usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
+usb usb1: Product: EHCI Host Controller
+usb usb1: Manufacturer: Linux 5.8.7-1-default ehci_hcd
+usb usb1: SerialNumber: 1c1a000.usb
+hub 1-0:1.0: USB hub found
+hub 1-0:1.0: 1 port detected
+ehci-platform 1c1b000.usb: EHCI Host Controller
+ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 2
+ehci-platform 1c1b000.usb: irq 29, io mem 0x01c1b000
+ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
+ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00
+usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
-usb usb2: Product: Generic Platform OHCI controller
-usb usb2: Manufacturer: Linux 5.8.7-1-default ohci_hcd
-usb usb2: SerialNumber: 1c1b400.usb
+usb usb2: Product: EHCI Host Controller
+usb usb2: Manufacturer: Linux 5.8.7-1-default ehci_hcd
+usb usb2: SerialNumber: 1c1b000.usb
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
-usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
+ohci-platform: OHCI generic platform driver
+ohci-platform 1c1a400.usb: Generic Platform OHCI controller
+ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 3
+ohci-platform 1c1a400.usb: irq 28, io mem 0x01c1a400
+sunxi-mmc 1c10000.mmc: initialized, max. request size: 16384 KB
+mmc1: new high speed SDIO card at address 0001
+usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.08
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
-usb usb3: Product: EHCI Host Controller
-usb usb3: Manufacturer: Linux 5.8.7-1-default ehci_hcd
-usb usb3: SerialNumber: 1c1a000.usb
+usb usb3: Product: Generic Platform OHCI controller
+usb usb3: Manufacturer: Linux 5.8.7-1-default ohci_hcd
+usb usb3: SerialNumber: 1c1a400.usb
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
-ehci-platform 1c1b000.usb: EHCI Host Controller
-ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 4
-ehci-platform 1c1b000.usb: irq 30, io mem 0x01c1b000
-ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00
-usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
+ohci-platform 1c1b400.usb: Generic Platform OHCI controller
+ohci-platform 1c1b400.usb: new USB bus registered, assigned bus number 4
+ohci-platform 1c1b400.usb: irq 30, io mem 0x01c1b400
+usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.08
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
-usb usb4: Product: EHCI Host Controller
-usb usb4: Manufacturer: Linux 5.8.7-1-default ehci_hcd
-usb usb4: SerialNumber: 1c1b000.usb
+usb usb4: Product: Generic Platform OHCI controller
+usb usb4: Manufacturer: Linux 5.8.7-1-default ohci_hcd
+usb usb4: SerialNumber: 1c1b400.usb
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
+usb_phy_generic usb_phy_generic.1.auto: supply vcc not found, using dummy
regulator
+mmcblk0: mmc0:aaaa SC32G 29.7 GiB
+GPT:Primary header thinks Alt. header is not at the end of the disk.
+GPT:4022271 != 62333951
+GPT:Alternate GPT header not at the end of the disk.
+GPT:4022271 != 62333951
+GPT: Use GNU Parted to correct GPT errors.
+ mmcblk0: p1 p2 p3
+BTRFS: device label ROOT devid 1 transid 23 /dev/mmcblk0p3 scanned by
systemd-udevd (349)
+GPT:Primary header thinks Alt. header is not at the end of the disk.
+GPT:4022271 != 62333951
+GPT:Alternate GPT header not at the end of the disk.
+GPT:4022271 != 62333951
+GPT: Use GNU Parted to correct GPT errors.
+ mmcblk0: p1 p2 p3
+ mmcblk0: p1 p2 p3
+ mmcblk0: p1 p2 p3
+ mmcblk0: p1 p2
+ mmcblk0: p1 p2
+ mmcblk0: p1 p2 p3
+ mmcblk0: p1 p2 p3
+ mmcblk0: p1 p2 p3
+ mmcblk0: p1 p2 p3
+BTRFS info (device mmcblk0p3): disk space caching is enabled
+BTRFS info (device mmcblk0p3): has skinny extents
+BTRFS info (device mmcblk0p3): enabling ssd optimizations
+BTRFS info (device mmcblk0p3): resize device /dev/mmcblk0p3 (devid 1) from
1517268992 to 31372849152
+BTRFS info (device mmcblk0p3): disk space caching is enabled
+BTRFS info (device mmcblk0p3): has skinny extents
+BTRFS info (device mmcblk0p3): enabling ssd optimizations
+vcc3v0: disabling
+vcc5v0: disabling
+systemd[1]: systemd 246.4+suse.20.gf1344d5b7f running in system mode. (+PAM
+AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT
+GNUTLS +ACL +XZ +LZ4 -ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2
default-hierarchy=hybrid)
+systemd[1]: Detected architecture arm.
+systemd[1]: Running with unpopulated /etc.
+systemd[1]: Initializing machine ID from random generator.
+systemd[1]: Populated /etc with preset unit settings.
+systemd[1]: initrd-switch-root.service: Succeeded.
+systemd[1]: Stopped Switch Root.
+systemd[1]: systemd-journald.service: Scheduled restart job, restart counter
is at 1.
+systemd[1]: Created slice system-getty.slice.
+systemd[1]: Created slice system-modprobe.slice.
+systemd[1]: Created slice system-serial\x2dgetty.slice.
+systemd[1]: Created slice User and Session Slice.
+systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
+systemd[1]: Set up automount Arbitrary Executable File Formats File System
Automount Point.
+systemd[1]: Reached target Local Encrypted Volumes.
+systemd[1]: Stopped target Switch Root.
+systemd[1]: Stopped target Initrd File Systems.
+systemd[1]: Stopped target Initrd Root File System.
+systemd[1]: Reached target Remote File Systems.
+systemd[1]: Reached target Slices.
+systemd[1]: Reached target System Time Set.
+systemd[1]: Listening on Device-mapper event daemon FIFOs.
+systemd[1]: Listening on LVM2 poll daemon socket.
+systemd[1]: Listening on initctl Compatibility Named Pipe.
+systemd[1]: Listening on udev Control Socket.
+systemd[1]: Listening on udev Kernel Socket.
+systemd[1]: Activating swap
/dev/disk/by-uuid/279040ab-d1a8-4081-91cc-dab8b0774e20...
+systemd[1]: Condition check resulted in Huge Pages File System being skipped.
+systemd[1]: Mounting POSIX Message Queue File System...
+systemd[1]: Mounting Kernel Debug File System...
+Adding 511996k swap on /dev/mmcblk0p2. Priority:-2 extents:1 across:511996k
SSFS
+systemd[1]: Mounting Kernel Trace File System...
+systemd[1]: Starting Create list of static device nodes for the current
kernel...
+systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd
or progress polling...
+systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
+systemd[1]: Condition check resulted in Set Up Additional Binary Formats being
skipped.
+systemd[1]: systemd-fsck-root.service: Succeeded.
+systemd[1]: Stopped File System Check on Root Device.
+systemd[1]: Stopped Journal Service.
+systemd[1]: Starting Journal Service...
+systemd[1]: Starting Load Kernel Modules...
+systemd[1]: Starting Remount Root and Kernel File Systems...
+systemd[1]: Starting Coldplug All udev Devices...
+systemd[1]: sysroot.mount: Succeeded.
+systemd[1]: Activated swap
/dev/disk/by-uuid/279040ab-d1a8-4081-91cc-dab8b0774e20.
+systemd[1]: Mounted POSIX Message Queue File System.
+systemd[1]: Mounted Kernel Debug File System.
+systemd[1]: Mounted Kernel Trace File System.
+systemd[1]: Finished Create list of static device nodes for the current
kernel.
+systemd[1]: Reached target Swap.
+systemd[1]: Finished Load Kernel Modules.
+systemd[1]: Condition check resulted in FUSE Control File System being
skipped.
+systemd[1]: Starting Apply Kernel Variables...
+systemd[1]: Started Journal Service.
+BTRFS info (device mmcblk0p3): use lzo compression, level 0
+BTRFS info (device mmcblk0p3): enabling auto defrag
+BTRFS info (device mmcblk0p3): disk space caching is enabled
+mc: Linux media interface: v0.10
+videodev: Linux video capture interface: v2.00
+sunxi_cedrus: module is from the staging directory, the quality is unknown,
you have been warned.
+cedrus 1c0e000.video-codec: Device registered as /dev/video0
+sun8i-di 1400000.deinterlace: Device registered as /dev/video1
+sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
+sun8i-h3-pinctrl 1c20800.pinctrl: supply vcc-pc not found, using dummy
regulator
+lima 1c40000.gpu: gp - mali400 version major 1 minor 1
+lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1
+lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1
+lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus
+lima 1c40000.gpu: bus rate = 200000000
+lima 1c40000.gpu: mod rate = 384000000
+[drm] Initialized lima 1.1.0 20191231 for 1c40000.gpu on minor 0
dwmac-sun8i 1c30000.ethernet: IRQ eth_wake_irq not found
dwmac-sun8i 1c30000.ethernet: IRQ eth_lpi not found
dwmac-sun8i 1c30000.ethernet: PTP uses main clock
@@ -369,7 +473,15 @@
dwmac-sun8i 1c30000.ethernet: Switch mux to internal PHY
dwmac-sun8i 1c30000.ethernet: Powering internal PHY
libphy: mdio_mux: probed
-vcc3v0: disabling
-vcc3v3: disabling
-vcc5v0: disabling
-
+spi-nor spi0.0: mx25l1606e (2048 Kbytes)
+spi-nor spi1.0: unrecognized JEDEC id bytes: 00 00 00 00 00 00
+random: crng init done
+random: 7 urandom warning(s) missed due to ratelimiting
+dwmac-sun8i 1c30000.ethernet eth0: PHY [0.1:01] driver [Generic PHY]
(irq=POLL)
+dwmac-sun8i 1c30000.ethernet eth0: No Safety Features support found
+dwmac-sun8i 1c30000.ethernet eth0: No MAC Management Counters available
+dwmac-sun8i 1c30000.ethernet eth0: PTP not supported by HW
+dwmac-sun8i 1c30000.ethernet eth0: configuring for phy/mii link mode
+dwmac-sun8i 1c30000.ethernet eth0: Link is Up - 100Mbps/Full - flow control
rx/tx
+IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
+NET: Registered protocol family 17
--
You are receiving this mail because:
You are on the CC list for the bug.