May 2020 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 1133730] New: Please split libqt5xcbqpa-devel for deepin desktop
by bugzilla_noreply＠novell.com 31 Aug '21

31 Aug '21

http://bugzilla.opensuse.org/show_bug.cgi?id=1133730 Bug ID: 1133730 Summary: Please split libqt5xcbqpa-devel for deepin desktop Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: All OS: openSUSE Factory Status: NEW Severity: Minor Priority: P5 - None Component: Development Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: hillwoodroc(a)gmail.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Hi, i am trying to port Deepin Desktop for openSUSE, my work need libqt5xcbqpa-devel. So, could you split libqt5xcbqpa-devel for Deepin Desktop project for openSUSE Tumbleweed and Leap? -- You are receiving this mail because: You are on the CC list for the bug.

2 3

[Bug 1151207] New: dot from graphviz sefaults on input
by bugzilla_noreply＠novell.com 31 Aug '21

31 Aug '21

http://bugzilla.suse.com/show_bug.cgi?id=1151207 Bug ID: 1151207 Summary: dot from graphviz sefaults on input Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.1 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Other Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: rguenther(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created attachment 818742 --> http://bugzilla.suse.com/attachment.cgi?id=818742&action=edit testcase With > dot -Tps -o /dev/null /tmp/tmpz0r863kc Segmentation fault (core dumped) #0 0x00007f91882ada93 in make_regular_edge (et=10, cnt=1, ind=<optimized out>, edges=0x55b288ed9980, P=0x55b288f28710, sp=0x7ffe484a84e0, g=0x55b28759f580) at dotsplines.c:1825 #1 0x00007f91882ada93 in _dot_splines (g=g@entry=0x55b28759f580, normalize=normalize@entry=1) at dotsplines.c:459 #2 0x00007f91882b270a in dot_splines (g=g@entry=0x55b28759f580) at dotsplines.c:520 #3 0x00007f918829ecbd in dotLayout (g=g@entry=0x55b28759f580) at dotinit.c:336 #4 0x00007f918829f4a0 in doDot (g=0x55b28759f580) at dotinit.c:463 #5 0x00007f918829f4a0 in dot_layout (g=0x55b28759f580) at dotinit.c:509 #6 0x00007f918e42f03b in gvLayoutJobs () at /usr/lib64/libgvc.so.6 #7 0x000055b286b2306f in main (argc=<optimized out>, argv=<optimized out>) at dot.c:134 using graphviz-2.40.1-lp151.6.3.1.x86_64 On Tumbleweed with graphviz-2.40.1+git20190410.b0871968d-2.4.x86_64 it works fine. -- You are receiving this mail because: You are on the CC list for the bug.

2 5

[Bug 1126261] New: Cross-compilers are not able to compile a simple hello-world
by bugzilla_noreply＠novell.com 31 Aug '21

31 Aug '21

http://bugzilla.opensuse.org/show_bug.cgi?id=1126261 Bug ID: 1126261 Summary: Cross-compilers are not able to compile a simple hello-world Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Development Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: guillaume.gardet(a)arm.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- If you use: * aarch64-suse-linuxgcc from cross-aarch64-gcc7 or cross-aarch64-gcc8 on x86_64 * x86_64-suse-linuxgcc from cross-x86_64-gcc7 or cross-x86_64-gcc8 on aarch64 you are not able to compile a simple hello world program: #include <stdio.h> int main(){ printf("Hello\n"); return 0; } Because it fails with: 'fatal error: stdio.h: No such file or directory' And if I remove the 'include', I get a hint to add it, and then fails with: /usr/lib64/gcc/aarch64-suse-linux/8/ld: cannot find crt1.o: No such file or directory /usr/lib64/gcc/aarch64-suse-linux/8/ld: cannot find crti.o: No such file or directory /usr/lib64/gcc/aarch64-suse-linux/8/ld: cannot find crtbegin.o: No such file or directory /usr/lib64/gcc/aarch64-suse-linux/8/ld: cannot find -lgcc /usr/lib64/gcc/aarch64-suse-linux/8/ld: cannot find -lgcc_s /usr/lib64/gcc/aarch64-suse-linux/8/ld: cannot find -lc /usr/lib64/gcc/aarch64-suse-linux/8/ld: cannot find -lgcc /usr/lib64/gcc/aarch64-suse-linux/8/ld: cannot find -lgcc_s /usr/lib64/gcc/aarch64-suse-linux/8/ld: cannot find crtend.o: No such file or directory /usr/lib64/gcc/aarch64-suse-linux/8/ld: cannot find crtn.o: No such file or directory collect2: error: ld returned 1 exit status whereas there are: /usr/lib64/gcc/x86_64-suse-linux/8/crtbegin.o /usr/lib64/gcc/x86_64-suse-linux/8/libgcc.a /usr/lib64/gcc/x86_64-suse-linux/8/libgcc_s.so -- You are receiving this mail because: You are on the CC list for the bug.

2 6

[Bug 1010186] New: Kdenlive locks up when trying to add new clips
by bugzilla_noreply＠novell.com 29 Aug '21

29 Aug '21

http://bugzilla.opensuse.org/show_bug.cgi?id=1010186 Bug ID: 1010186 Summary: Kdenlive locks up when trying to add new clips Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: x86-64 OS: SUSE Other Status: NEW Severity: Normal Priority: P5 - None Component: KDE Applications Assignee: opensuse-kde-bugs(a)opensuse.org Reporter: neil(a)behindburlesque.co.uk QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- When trying to add clips to an existing project, Kdenlive locks up or crashes. This happens regularly, but not always. Detail: Open an existing project Remove item on timeline - see note below Click dropdown to add clip to project Dialog opens and application often locks up before anything else can be clicked Alternatively, application sometimes crashes without opening the dialog at all Note This seems to be more prone to happening after removing an item from the timeline -- You are receiving this mail because: You are on the CC list for the bug.

2 1

[Bug 1120430] New: 0ad segfaults in libmozjs38.so
by bugzilla_noreply＠novell.com 28 Aug '21

28 Aug '21

http://bugzilla.opensuse.org/show_bug.cgi?id=1120430 Bug ID: 1120430 Summary: 0ad segfaults in libmozjs38.so Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: x86-64 OS: Other Status: NEW Severity: Critical Priority: P5 - None Component: Other Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: pupperino(a)tuta.io QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:60.0) Gecko/20100101 Firefox/60.0 Build Identifier: Random crashes Reproducible: Sometimes Steps to Reproduce: Play for a while Actual Results: Crashes Expected Results: Game continues I find it curious that `zypper info 0ad --requires` lists libmozjs38.so, but 0ad [seems to use its own patched version of this library](https://trac.wildfiregames.com/browser/ps/trunk/libraries/source/s… [19774.210902] pyrogenesis[10135]: segfault at 0 ip 00007ff66458d010 sp 00007ffc2f31bfe8 error 4 in libmozjs-38.so[7ff664477000+6b4000] [19774.210911] Code: ff e8 94 a6 ee ff e9 d9 cc ee ff e9 e0 cc ee ff 66 2e 0f 1f 84 00 00 00 00 00 48 8b 47 30 48 39 70 20 77 06 48 3b 70 28 72 30 <48> 8b 16 48 85 d2 74 28 48 89 d1 48 81 e1 00 00 f0 ff 48 81 c9 e8 -- You are receiving this mail because: You are on the CC list for the bug.

2 1

[Bug 1149980] New: cleanup target system unmounting in umount_finish
by bugzilla_noreply＠novell.com 26 Aug '21

26 Aug '21

http://bugzilla.suse.com/show_bug.cgi?id=1149980 Bug ID: 1149980 Summary: cleanup target system unmounting in umount_finish Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Installation Assignee: yast2-maintainers(a)suse.de Reporter: snwint(a)suse.com QA Contact: jsrain(a)suse.com Found By: --- Blocker: --- Created attachment 817376 --> http://bugzilla.suse.com/attachment.cgi?id=817376&action=edit yast log umount_finish (https://github.com/yast/yast-installation/blob/master/src/lib/installation/…) unmounts the filesystems that have been mounted to the target system during the installation (i.e. everything below /mnt). It does so *twice*. As it usually succeeds in the first iteration, the second iteration mostly fails. And as there's quite some fallback stuff programmed in (like lazy unmounting and ro-remounting) this leads to quite a mess in the logs and some unneeded activities. See attached log fragment for an example. -- You are receiving this mail because: You are on the CC list for the bug.

2 14

[Bug 909111] New: The rescan-scsi-bus.sh from the sgutils package is broken since SuSE-13.1
by bugzilla_noreply＠novell.com 26 Aug '21

26 Aug '21

http://bugzilla.opensuse.org/show_bug.cgi?id=909111 Bug ID: 909111 Summary: The rescan-scsi-bus.sh from the sgutils package is broken since SuSE-13.1 Classification: openSUSE Product: openSUSE Distribution Version: 13.2 Hardware: x86-64 OS: openSUSE 13.2 Status: NEW Severity: Normal Priority: P5 - None Component: Other Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: dmarkh(a)cfl.rr.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:33.0) Gecko/20100101 Firefox/33.0 Build Identifier: This script no longer "finds new" or "removes no longer attached" scsi devices. As shown below, I have a scsi disk at scsi ID-0 at /dev/sg5. # lsscsi -g [0:0:0:0] disk ATA ST3320620AS K /dev/sda /dev/sg0 [13:0:0:0] process Marvell 91xx Config 1.01 - /dev/sg1 [16:0:0:0] disk IMPRIMIS 94601-15 4614 /dev/sdd /dev/sg5 [17:0:0:0] cd/dvd LITE-ON DVDRW LH-20A1P KL0G /dev/sr0 /dev/sg2 [18:0:0:0] disk ATA ST3160811AS E /dev/sdb /dev/sg3 [18:0:1:0] disk ATA ST3160815AS B /dev/sdc /dev/sg4 I remove the drive at scsi ID-0 drive and install an additional drive at scsi ID-1 then run the script. # rescan-scsi-bus.sh Scanning SCSI subsystem for new devices Scanning host 0 for SCSI target IDs 0 1 2 3 4 5 6 7, all LUNs Scanning for device 0 0 0 0 ... OLD: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: ST3320620AS Rev: K Type: Direct-Access ANSI SCSI revision: 05 Scanning host 1 for SCSI target IDs 0 1 2 3 4 5 6 7, all LUNs Scanning host 2 for SCSI target IDs 0 1 2 3 4 5 6 7, all LUNs Scanning host 3 for SCSI target IDs 0 1 2 3 4 5 6 7, all LUNs Scanning host 4 for SCSI target IDs 0 1 2 3 4 5 6 7, all LUNs Scanning host 5 for SCSI target IDs 0 1 2 3 4 5 6 7, all LUNs Scanning host 6 for SCSI target IDs 0 1 2 3 4 5 6 7, all LUNs Scanning host 7 for SCSI target IDs 0 1 2 3 4 5 6 7, all LUNs Scanning host 8 for SCSI target IDs 0 1 2 3 4 5 6 7, all LUNs Scanning host 9 for SCSI target IDs 0 1 2 3 4 5 6 7, all LUNs Scanning host 10 for SCSI target IDs 0 1 2 3 4 5 6 7, all LUNs Scanning host 11 for SCSI target IDs 0 1 2 3 4 5 6 7, all LUNs Scanning host 12 for SCSI target IDs 0 1 2 3 4 5 6 7, all LUNs Scanning host 13 for SCSI target IDs 0 1 2 3 4 5 6 7, all LUNs Scanning for device 13 0 0 0 ... OLD: Host: scsi13 Channel: 00 Id: 00 Lun: 00 Vendor: Marvell Model: 91xx Config Rev: 1.01 Type: Processor ANSI SCSI revision: 05 Scanning host 14 for SCSI target IDs 0 1 2 3 4 5 6 7, all LUNs Scanning host 15 for SCSI target IDs 0 1 2 3 4 5 6 7, all LUNs Scanning host 16 for SCSI target IDs 0 1 2 3 4 5 6 7, all LUNs Scanning for device 16 0 0 0 ... OLD: Host: scsi16 Channel: 00 Id: 00 Lun: 00 Vendor: IMPRIMIS Model: 94601-15 Rev: 4614 Type: Direct-Access ANSI SCSI revision: 01 Scanning host 17 for SCSI target IDs 0 1 2 3 4 5 6 7, all LUNs Scanning for device 17 0 0 0 ... OLD: Host: scsi17 Channel: 00 Id: 00 Lun: 00 Vendor: LITE-ON Model: DVDRW LH-20A1P Rev: KL0G Type: CD-ROM ANSI SCSI revision: 05 Scanning host 18 for SCSI target IDs 0 1 2 3 4 5 6 7, all LUNs Scanning for device 18 0 0 0 ... OLD: Host: scsi18 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: ST3160811AS Rev: E Type: Direct-Access ANSI SCSI revision: 05 Scanning for device 18 0 1 0 ... OLD: Host: scsi18 Channel: 00 Id: 01 Lun: 00 Vendor: ATA Model: ST3160815AS Rev: B Type: Direct-Access ANSI SCSI revision: 05 0 new or changed device(s) found. 0 remapped or resized device(s) found. 0 device(s) removed. # lsscsi -g [0:0:0:0] disk ATA ST3320620AS K /dev/sda /dev/sg0 [13:0:0:0] process Marvell 91xx Config 1.01 - /dev/sg1 [16:0:0:0] disk IMPRIMIS 94601-15 4614 /dev/sdd /dev/sg5 [17:0:0:0] cd/dvd LITE-ON DVDRW LH-20A1P KL0G /dev/sr0 /dev/sg2 [18:0:0:0] disk ATA ST3160811AS E /dev/sdb /dev/sg3 [18:0:1:0] disk ATA ST3160815AS B /dev/sdc /dev/sg4 It not only did not remove the one at ID-0 that was removed, but did not find the new one attached. Below is an "lsscsi -g" after a reboot with BOTH drives attached. #lsscsi -g [0:0:0:0] disk ATA ST3320620AS K /dev/sda /dev/sg0 [13:0:0:0] process Marvell 91xx Config 1.01 - /dev/sg1 [16:0:0:0] disk IMPRIMIS 94601-15 4614 /dev/sdd /dev/sg5 [16:0:1:0] disk IMPRIMIS 94601-15 4614 /dev/sde /dev/sg6 [17:0:0:0] cd/dvd LITE-ON DVDRW LH-20A1P KL0G /dev/sr0 /dev/sg2 [18:0:0:0] disk ATA ST3160811AS E /dev/sdb /dev/sg3 [18:0:1:0] disk ATA ST3160815AS B /dev/sdc /dev/sg4 Reproducible: Always Steps to Reproduce: 1. See details 2. 3. Actual Results: This script, before SuSE-13.1 would remove any disks physically removed and add any physically added since boot. It is broken This is NOT kernel related as the same thing happens with a vanilla 3.16.7 kernel. I'm fairly certain this is a systemd issue. -- You are receiving this mail because: You are on the CC list for the bug.

2 16

[Bug 1039889] New: Yast handle category and pattern on a strange way for user visible/invisible
by bugzilla_noreply＠novell.com 26 Aug '21

26 Aug '21

http://bugzilla.suse.com/show_bug.cgi?id=1039889 Bug ID: 1039889 Summary: Yast handle category and pattern on a strange way for user visible/invisible Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 Assignee: yast2-maintainers(a)suse.de Reporter: mlin(a)suse.com QA Contact: jsrain(a)suse.com CC: dimstar(a)opensuse.org Found By: --- Blocker: --- On TW snapshot 20170517 we see a strange situation on yast[1], while send 'down' key to 'x pattern', after press 'down' after 'font pattern'(x pattern is the next one) the list page is scroll up, the reason is 'Primary Functions' and 'Kubic Stack' entries suddenly appears on the top side. Dig into this issue I see weird behavior below: 1) at the beginning 'Primary Functions' and 'Kubic Stack' does not appear while scroll down the list to the bottom side, however after that, move to the top side these two entries appears at the top side. 2) press 'end' move the focus to the bottom side, and start repeating send 'up' key, till the focus was on the 'Server Functions' then press 'up' key again the next one is 'Kubic Stack'[2], and send 'up' key again the focus is lost[3], keep sending 'up' key the scroll bar does not change, now drag the scroll bar to the top side, I see 'Primary Functions' and 'Kubic Stack' is there, and the focus is on the 'Primary Functions' entry. issues lead us so confused the ordering of entries(and timing to resort entries) and pattern's visible/invisible, and thought that entry appeared suddenly at some point is a real bug. Note that, this issue now we only seen on NET install due to many patterns is only available from net install, tro to reproduce this issue from net iso[5] you have to set Server: openqa.opensuse.org and Directory: /assets/repo/openSUSE-Tumbleweed-oss-i586-x86_64-Snapshot20170517 from testing HEAD due to it's not published yet to download.o.o. [1] https://openqa.opensuse.org/tests/405554#step/installer_desktopselection/39 [2] http://susepaste.org/82684928 [3] http://susepaste.org/20244118 [4] http://susepaste.org/76581180 [5] https://openqa.opensuse.org/tests/405554/asset/iso/openSUSE-Tumbleweed-NET-… -- You are receiving this mail because: You are on the CC list for the bug.

2 3

[Bug 1140700] New: Network Manager loses the VPN password, and is unwilling to save it
by bugzilla_noreply＠novell.com 26 Aug '21

26 Aug '21

http://bugzilla.suse.com/show_bug.cgi?id=1140700 Bug ID: 1140700 Summary: Network Manager loses the VPN password, and is unwilling to save it Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: x86-64 OS: openSUSE Factory Status: NEW Severity: Normal Priority: P5 - None Component: Network Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: claudio.fontana(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- since last weekend update, on my thumbleweed installation, the password I had already set for my VPN disappeared, and I am now asked to explicitly provide it at every connection. I have entered the password again manually in the configuration for the network in Network Manager, and clicked "Save", but the information is not saved, the password is lost, and the field is empty again. OS: is openSuse Thumbleweed -- You are receiving this mail because: You are on the CC list for the bug.

2 16

[Bug 1115988] New: [Build1491.5][Staging][E][sidebar] License agreement textbox gets too much empty space when sidebar is closed
by bugzilla_noreply＠novell.com 25 Aug '21

25 Aug '21

http://bugzilla.suse.com/show_bug.cgi?id=1115988 Bug ID: 1115988 Summary: [Build1491.5][Staging][E][sidebar] License agreement textbox gets too much empty space when sidebar is closed Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Installation Assignee: yast2-maintainers(a)suse.de Reporter: riafarov(a)suse.com QA Contact: jsrain(a)suse.com Found By: --- Blocker: --- Created attachment 789671 --> http://bugzilla.suse.com/attachment.cgi?id=789671&action=edit Screenshot ## Observation I would expect that we get exactly same layout if sidebar is hidden, which is not the case. For the license agreement we get textbox using all the space, but it doesn't decrease number of the lines in the text, therefore we end up having too much blank space. Would be great if we could either do not resize textbox more than some value or render text in a way that we don't get so much blank area. Please, find the screenshot in the attachment. Here is example of the old layout: https://openqa.opensuse.org/tests/794689#step/welcome/1 -- You are receiving this mail because: You are on the CC list for the bug.

2 5