September 2014 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 808315] New: RFC: No longer install HPLIP and other big printer driver packages by default?
by bugzilla_noreply＠novell.com 17 Sep '14

17 Sep '14

https://bugzilla.novell.com/show_bug.cgi?id=808315 https://bugzilla.novell.com/show_bug.cgi?id=808315#c0 Summary: RFC: No longer install HPLIP and other big printer driver packages by default? Classification: openSUSE Product: openSUSE Factory Version: 13.1 Milestone 0 Platform: All OS/Version: SUSE Other Status: NEW Severity: Enhancement Priority: P5 - None Component: Printing AssignedTo: coolo(a)suse.com ReportedBy: jsmeix(a)suse.com QAContact: jsmeix(a)suse.com Found By: Development Blocker: No This is a request for comments whether or not it is nowadays still needed to "fill up" by default any user's harddisk when HPLIP (and other big printer driver packages like Gutenprint) are installed unconditioned in our default system. The advantage when all usual printer driver packages are installed by default is that usual printer setup works without the need to get and install printer driver packages. Actual disk usage of HPLIP and Gutenprint on openSUSE 12.3 i586: ----------------------------------------------------------------------- # du -hc $( for f in $( rpm -ql hplip hplip-hpijs hplip-sane ) ; \ do test -f $f && echo $f ; done ) | tail -n1 28M total # du -hc $( for f in $( rpm -ql gutenprint ) ; \ do test -f $f && echo $f ; done ) | tail -n1 50M total ----------------------------------------------------------------------- RPM "Size" for HPLIP and Gutenprint on openSUSE 12.3 i586 and x86_64: ----------------------------------------------------------------------- hplip-3.12.11-2.2.1.i586.rpm Size : 10420581 hplip-3.12.11-2.2.1.x86_64.rpm Size : 10432287 hplip-hpijs-3.12.11-2.2.1.i586.rpm Size : 14418324 hplip-hpijs-3.12.11-2.2.1.x86_64.rpm Size : 14418724 hplip-sane-3.12.11-2.2.1.i586.rpm Size : 158720 hplip-sane-3.12.11-2.2.1.x86_64.rpm Size : 151782 gutenprint-5.2.9-3.1.1.i586.rpm Size : 42582349 gutenprint-5.2.9-3.1.1.x86_64.rpm Size : 43145887 ----------------------------------------------------------------------- On the one hand on nowadays physical harddisks 28M and 50M is not really much but on the other hand harddisk space could be of more interest on virtual machines and there is the general issue to what extent it makes sense to install software unconditioned by default. Since some time the hplip-hpijs and gutenprint RPMs contain long lists of RPM provides of the form postscriptdriver(<manufacturer>;<model>;) According to bnc#735864 and bnc#735865 this seems to support some kind of automated printer driver package search - but I am really no expert here. I assume that automated printer driver package search requires automated printer model detection but printer model detection basically only works well for locally connected printers (i.e. USB printers) but it cannot work when the actual printer device is "hidden" in the network behind whatever kind of printer "share" (e.g. a LPD print queue on a printserver box or router box or a Windows/SMB printer share or whatever else). -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 9

[Bug 851759] New: command-not-found (cnf) broken in some situations
by bugzilla_noreply＠novell.com 17 Sep '14

17 Sep '14

https://bugzilla.novell.com/show_bug.cgi?id=851759 https://bugzilla.novell.com/show_bug.cgi?id=851759#c0 Summary: command-not-found (cnf) broken in some situations Classification: openSUSE Product: openSUSE 13.1 Version: Final Platform: x86-64 OS/Version: openSUSE 13.1 Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: highwaystar.ru(a)gmail.com QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/31.0.1650.11 Safari/537.36 SUSE/31.0.1650.11 command-not-found produce strange output when TAB hitted after pulseaudio typed. Reproducible: Always Steps to Reproduce: 1. type in console 'pulseaudio' 2. press TAB button 2-3 times Actual Results: I get following output: pulseaudio If '_init_completion' is not a typo you can use command-not-found to lookup the package that contains it, like this: cnf _init_completion If '_init_completion' is not a typo you can use command-not-found to lookup the package that contains it, like this: cnf _init_completion If '_init_completion' is not a typo you can use command-not-found to lookup the package that contains it, like this: cnf _init_completion If '_init_completion' is not a typo you can use command-not-found to lookup the package that contains it, like this: cnf _init_completion Expected Results: command-not-found should not produce such strange output -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 12

[Bug 888268] New: Branching packages failed with: HTTP Error 401: basic auth failed
by bugzilla_noreply＠novell.com 17 Sep '14

17 Sep '14

https://bugzilla.novell.com/show_bug.cgi?id=888268 https://bugzilla.novell.com/show_bug.cgi?id=888268#c0 Summary: Branching packages failed with: HTTP Error 401: basic auth failed Classification: openSUSE Product: openSUSE.org Version: unspecified Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: BuildService AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: tbechtold(a)suse.com QAContact: adrian(a)suse.com Found By: --- Blocker: --- My ~/.oscrc contains: [https://build.suse.de] email=tbechtold(a)suse.com user=tbechtold pass=secret aliases=i Creating branches from the webinterface works fine (with the same credentials, clicking on https://build.suse.de/package/branch_dialog/Devel:Cloud:4/patterns-cloud) But When I run the follwing command, I get a 401: $ osc -A i --debug branch Devel:Cloud:4 patterns-cloud POST https://build.suse.de/source/Devel:Cloud:4/patterns-cloud?cmd=branch Server returned an error: HTTP Error 401: basic auth failed Date: Tue, 22 Jul 2014 06:06:27 GMT Server: Apache/2.2.12 (Linux/SUSE) X-Frame-Options: SAMEORIGIN X-XSS-Protection: 1; mode=block X-Content-Type-Options: nosniff X-Opensuse-APIVersion: 2.5.51.git20140717.b0eada4 WWW-Authenticate: basic realm="API login" X-Opensuse-Errorcode: anonymous_user X-Opensuse-Runtimes: {"view":1.6047609999999999,"db":0.447995,"backend":0,"xml":0} Vary: Accept-Encoding Cache-Control: no-cache X-Request-Id: 62682094-29aa-4029-bf64-5d3804150adf X-Runtime: 0.013565 X-Powered-By: Phusion Passenger 4.0.40 Status: 401 Unauthorized Content-Type: application/xml; charset=utf-8 Connection: close Transfer-Encoding: chunked -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 6

[Bug 894292] New: Java:packages/tomcat: tomcat-lib depends on /usr/bin/rm, fails on SLES 11 SP3
by bugzilla_noreply＠novell.com 17 Sep '14

17 Sep '14

https://bugzilla.novell.com/show_bug.cgi?id=894292 https://bugzilla.novell.com/show_bug.cgi?id=894292#c0 Summary: Java:packages/tomcat: tomcat-lib depends on /usr/bin/rm, fails on SLES 11 SP3 Classification: openSUSE Product: openSUSE.org Version: unspecified Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: 3rd party software AssignedTo: bmaryniuk(a)suse.com ReportedBy: msmith(a)cbnco.com QAContact: opensuse-communityscreening(a)forge.provo.novell.com CC: tchvatal(a)suse.com Found By: --- Blocker: --- Hi, when installing tomcat-7.0.54-60.1.noarch on SLES 11 SP3 I get: Problem: nothing provides /usr/bin/rm needed by tomcat-lib-7.0.54-60.1.noarch Solution 1: do not install tomcat-7.0.54-60.1.noarch Solution 2: break tomcat-lib-7.0.54-60.1.noarch by ignoring some of its dependencies I suspect it's caused by the following change: Fri Jul 11 14:16:47 UTC 2014 - tchvatal(a)suse.com - Add path to rm command. Thanks, Mike -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 897108] New: [Yast2] Error after installation
by bugzilla_noreply＠novell.com 17 Sep '14

17 Sep '14

https://bugzilla.novell.com/show_bug.cgi?id=897108 https://bugzilla.novell.com/show_bug.cgi?id=897108#c0 Summary: [Yast2] Error after installation Classification: openSUSE Product: openSUSE Factory Version: 201409* Platform: PC OS/Version: openSUSE 13.2 Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: yast2-maintainers(a)suse.de ReportedBy: slawek(a)lach.art.pl QAContact: jsrain(a)suse.com Found By: --- Blocker: --- Created an attachment (id=606680) --> (http://bugzilla.novell.com/attachment.cgi?id=606680) Yast2 log /var/log/Yast2/y2log User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Firefox/31.0 After installation Yast2 shows me error message. I attached Yast2 log. Reproducible: Always Steps to Reproduce: 1. Install OpenSuSE factory from KDE's live pendrive 2. Reboot system Actual Results: I must clicked next. Expected Results: Message don't show. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 809809] New: The installation flow had removed a lot of packages without replacing them
by bugzilla_noreply＠novell.com 17 Sep '14

17 Sep '14

https://bugzilla.novell.com/show_bug.cgi?id=809809 https://bugzilla.novell.com/show_bug.cgi?id=809809#c0 Summary: The installation flow had removed a lot of packages without replacing them Classification: openSUSE Product: openSUSE 12.3 Version: Final Platform: x86-64 OS/Version: Other Status: NEW Severity: Critical Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: werner(a)suse.com QAContact: jsrain(a)suse.com CC: coolo(a)suse.com Found By: --- Blocker: --- A few examples mutt -- used on this family workstation as default MUA wine -- used here for installing and using the SteuerSpar Windows program sendmail -- used here instead of postfix acroread -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 17

[Bug 737549] New: find-lang, locales and man pages
by bugzilla_noreply＠novell.com 17 Sep '14

17 Sep '14

https://bugzilla.novell.com/show_bug.cgi?id=737549 https://bugzilla.novell.com/show_bug.cgi?id=737549#c0 Summary: find-lang, locales and man pages Classification: openSUSE Product: openSUSE 12.1 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Enhancement Priority: P5 - None Component: Basesystem AssignedTo: coolo(a)suse.de ReportedBy: cmorve69(a)yahoo.es QAContact: qa(a)suse.de Found By: Community User Blocker: --- Because of this http://lists.opensuse.org/opensuse-factory/2011-01/msg00116.html there is https://build.opensuse.org/package/view_file?file=remove-translations.diff&… But the same that is done for /usr/share/locale/ isn't done for /usr/share/man/. And there are problems like: https://build.opensuse.org/package/live_build_log?arch=x86_64&package=mkvto… .. checking filelist mkvtoolnix-5.2.0-91.1.x86_64.rpm: directories not owned by a package: - /usr/share/man/uk Notice that the "filesystem" package doesn't include subdirs under /usr/share/man with the languages. But "uk" is under /usr/share/locale (on a 11.4 system, I have no access to a 12.1 right now), so I guess it's a supported language. So, when using "%find_lang %{name} --with-man" (shouldn't --with-man be the default?) I would expect everything done automatically for both gettext and man files. Either add everything needed to %{name}.lang or delete the files/directories. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 8

[Bug 895970] New: wickedd-nanny uses 100% CPU time
by bugzilla_noreply＠novell.com 17 Sep '14

17 Sep '14

https://bugzilla.novell.com/show_bug.cgi?id=895970 https://bugzilla.novell.com/show_bug.cgi?id=895970#c0 Summary: wickedd-nanny uses 100% CPU time Classification: openSUSE Product: openSUSE Factory Version: 201409* Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: schwab(a)suse.com QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- (gdb) bt #0 0x0000007f8768ed44 in __GI___libc_sigaction (sig=sig@entry=15, act=act@entry=0x7fdebe1620, oact=oact@entry=0x7fdebe16b8) at ../ports/sysdeps/unix/sysv/linux/aarch64/sigaction.c:53 #1 0x0000007f8768ee10 in __GI___sigaction (sig=sig@entry=15, act=act@entry=0x7fdebe1620, oact=oact@entry=0x7fdebe16b8) at ../nptl/sigaction.c:43 #2 0x0000007f8768ebe4 in __bsd_signal (sig=sig@entry=15, handler=handler@entry=0x7f8789e330 <__ni_catch_terminal_signal>) at ../sysdeps/posix/signal.c:47 #3 0x0000007f878a22e4 in ni_caught_terminal_signal () at util.c:2427 #4 0x0000000000405cdc in babysit () at main.c:288 #5 main (argc=<optimized out>, argv=<optimized out>) at main.c:190 (gdb) f 3 #3 0x0000007f878a22e4 in ni_caught_terminal_signal () at util.c:2427 2427 signal(SIGTERM, __ni_catch_terminal_signal); (gdb) l 2422 ni_caught_terminal_signal(void) 2423 { 2424 static ni_bool_t installed_handlers = FALSE; 2425 2426 if (!installed_handlers) { 2427 signal(SIGTERM, __ni_catch_terminal_signal); 2428 signal(SIGINT, __ni_catch_terminal_signal); 2429 } 2430 2431 if (!__ni_terminal_signal) (gdb) fin Run till exit from #3 0x0000007f878a22e4 in ni_caught_terminal_signal () at util.c:2427 0x0000000000405cdc in babysit () at main.c:288 288 while (!ni_caught_terminal_signal()) { Value returned is $1 = 0 '\000' (gdb) n 291 if (ni_config_use_nanny()) { (gdb) 301 if (ni_socket_wait(timeout) != 0) (gdb) 288 while (!ni_caught_terminal_signal()) { (gdb) 291 if (ni_config_use_nanny()) { (gdb) 301 if (ni_socket_wait(timeout) != 0) (gdb) p timeout $2 = 0 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 6

[Bug 893807] New: zypper dup move that doesnt change repositories for packages
by bugzilla_noreply＠novell.com 17 Sep '14

17 Sep '14

https://bugzilla.novell.com/show_bug.cgi?id=893807 https://bugzilla.novell.com/show_bug.cgi?id=893807#c0 Summary: zypper dup move that doesnt change repositories for packages Classification: openSUSE Product: openSUSE Factory Version: 201408* Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: libzypp AssignedTo: zypp-maintainers(a)forge.provo.novell.com ReportedBy: mrueckert(a)suse.com QAContact: qa-bugs(a)suse.de CC: mls(a)suse.com Found By: --- Blocker: --- Especially with factory, you want to have the possibility to run "zypper dup" regularly to pick up bigger changes. the only problem is ... If you have more repositories than factory in use, it will switch packages around. I would like to propose a mode that would allow zypper to do bigger changes like zypper dup, without breaking where the packages are pulled from. If e.g. vlc is installed from videolan, it should not switch to packman, because PM currently has a higher release number. same for ruby extensions which it often moves from dlre to o:Factory. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 6

[Bug 896630] New: On installation of bumblebee "blacklist nouveau" is not added to /etc/modprobe.d/50-blacklist.conf.
by bugzilla_noreply＠novell.com 17 Sep '14

17 Sep '14

https://bugzilla.novell.com/show_bug.cgi?id=896630 https://bugzilla.novell.com/show_bug.cgi?id=896630#c0 Summary: On installation of bumblebee "blacklist nouveau" is not added to /etc/modprobe.d/50-blacklist.conf. Classification: openSUSE Product: openSUSE 13.1 Version: Final Platform: x86-64 OS/Version: openSUSE 13.1 Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: hakan.bergman(a)comhem.se QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/36.0.1985.125 Safari/537.36 optirun/primusrun gives following error: Cannot access secondary GPU: KMS not enabled Reproducible: Always Steps to Reproduce: 1.Installation of bumblebee from http://download.opensuse.org/repositories/X11:/Bumblebee/openSUSE_13.1/ 2. 3. Actual Results: Nothing is added to /etc/modprobe.d/50-blacklist.con. Expected Results: Add the line "blacklist nouveau" to /etc/modprobe.d/50-blacklist.conf. It's a simple typo in the file nvidia-bumlebee.spec in nvidia-bumblebee-340.32-2.1.src.rpm and possibly other versions of the rpm. This section: "if grep "nouveau" /etc/modprobe.d/50-blacklist.conf > /dev/null ; then echo "blacklist nouveau" >> /etc/modprobe.d/50-blacklist.conf fi" should be fixed like this: "if ! grep "nouveau" /etc/modprobe.d/50-blacklist.conf > /dev/null ; then echo "blacklist nouveau" >> /etc/modprobe.d/50-blacklist.conf fi" -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 6