April 2014 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 871815] New: GNOME-Shell shows Java applications in wrong order when using alt-tab
by bugzilla_noreply＠novell.com 03 Apr '14

03 Apr '14

https://bugzilla.novell.com/show_bug.cgi?id=871815 https://bugzilla.novell.com/show_bug.cgi?id=871815#c0 Summary: GNOME-Shell shows Java applications in wrong order when using alt-tab Classification: openSUSE Product: openSUSE 13.1 Version: Final Platform: x86-64 OS/Version: openSUSE 13.1 Status: NEW Severity: Normal Priority: P5 - None Component: GNOME AssignedTo: bnc-team-gnome(a)forge.provo.novell.com ReportedBy: opensuse(a)akling.org QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:28.0) Gecko/20100101 Firefox/28.0 GNOME-Shell doesn't show most recently used Java applications first when using alt-tab Reproducible: Always Steps to Reproduce: 1. Open a Java (Swing or Awt) application and a non-Java (eg GTK) application 2. Bring the GTK application to the foreground by using alt-tab 3. Bring the Java application to the foreground by clicking on its window Actual Results: 4. Use alt-tab again, the GTK application is still shown first and the Java applications second. Expected Results: It should be the other way round. I'm using OpenSuse 13.1, with the latest updates installed. The Java application I used are IntelliJ and DBVisualizer. All extensions for GNOME-Shell were disabled. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 0

[Bug 797199] New: plugable multiseat device not working
by bugzilla_noreply＠novell.com 03 Apr '14

03 Apr '14

https://bugzilla.novell.com/show_bug.cgi?id=797199 https://bugzilla.novell.com/show_bug.cgi?id=797199#c0 Summary: plugable multiseat device not working Classification: openSUSE Product: openSUSE Factory Version: 12.3 Milestone 1 Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Hotplug AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: damianatorrpm(a)gmail.com QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.11 (KHTML, like Gecko) Chrome/23.0.1271.97 Safari/537.11 Should be plug and play. After attaching device the new seat is created according to loginctl list-seats ; though it should also start up a new gdm session on that seat which is not done "loginctl list-sessions". Screen stays black. Reproducible: Always -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 10

[Bug 770087] New: add prefer samba4-libs to project conf, which is needed by kde-runtime-libs
by bugzilla_noreply＠novell.com 03 Apr '14

03 Apr '14

https://bugzilla.novell.com/show_bug.cgi?id=770087 https://bugzilla.novell.com/show_bug.cgi?id=770087#c0 Summary: add prefer samba4-libs to project conf, which is needed by kde-runtime-libs Classification: Internal Novell Products Product: openSUSE Build Service Version: 2.0 Platform: All OS/Version: Other Status: NEW Severity: Minor Priority: P5 - None Component: General AssignedTo: adrian(a)suse.com ReportedBy: d137(a)abv.bg QAContact: adrian(a)suse.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/536.11 (KHTML, like Gecko) Chrome/20.0.1132.47 Safari/536.11 when a package depends on kde-runtime-libs status is on i686 unresolvable, have choice for libsmbclient.so.0 ==> libsmbclient or samba4-libs please add prefer samba4-libs, which is needed by kde-runtime-libs we should prefer samba4-libs since libsmbclient brings other have choices unresolvables Best Regards, Damian Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 871774] New: When installing factory over ssh, login does not work - /etc/shadow missing
by bugzilla_noreply＠novell.com 03 Apr '14

03 Apr '14

https://bugzilla.novell.com/show_bug.cgi?id=871774 https://bugzilla.novell.com/show_bug.cgi?id=871774#c0 Summary: When installing factory over ssh, login does not work - /etc/shadow missing Classification: openSUSE Product: openSUSE Factory Version: 13.2 Milestone 0 Platform: x86-64 OS/Version: openSUSE 13.2 Status: NEW Severity: Major Priority: P5 - None Component: Installation AssignedTo: yast2-maintainers(a)suse.de ReportedBy: mpluskal(a)suse.com QAContact: jsrain(a)suse.com Found By: --- Blocker: --- Steps to reproduce: 1) Start netinst of openSUSE factory 2) On boot cmdline add ssh=2 sshpassword=***** I am not able to login to machine via ssh (but when I check /proc/cmdline when localy at machine password is entered correctly) When I try to change password on console of machine: # passwd Enter new password: Retype new password: passwd: Authentication token manipulation error passwd: password unchanged I have noticed that /etc/shadow is missing in installation system, when I 'touch /etc/shadow' I can change password, and login via ssh. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 871708] New: installer/console says sshd: run 'rcsshd start' which is no longer working
by bugzilla_noreply＠novell.com 03 Apr '14

03 Apr '14

https://bugzilla.novell.com/show_bug.cgi?id=871708 https://bugzilla.novell.com/show_bug.cgi?id=871708#c0 Summary: installer/console says sshd: run 'rcsshd start' which is no longer working Classification: openSUSE Product: openSUSE Factory Version: 13.2 Milestone 0 Platform: x86-64 OS/Version: openSUSE 13.2 Status: NEW Severity: Normal Priority: P5 - None Component: Installation AssignedTo: yast2-maintainers(a)suse.de ReportedBy: mpluskal(a)suse.com QAContact: jsrain(a)suse.com Found By: --- Blocker: --- In installer shell, there is message saying: sshd: run 'rcsshd start' .. however rcsshd start fails with: no such service sshd -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1

[Bug 822670] New: boot.sysstat cannot be enabled in YaST2 System Services (Runlevels)
by bugzilla_noreply＠novell.com 03 Apr '14

03 Apr '14

https://bugzilla.novell.com/show_bug.cgi?id=822670 https://bugzilla.novell.com/show_bug.cgi?id=822670#c0 Summary: boot.sysstat cannot be enabled in YaST2 System Services (Runlevels) Classification: openSUSE Product: openSUSE 12.3 Version: Final Platform: x86-64 OS/Version: openSUSE 12.3 Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: alexandr.malusek(a)gmail.com QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.32 (KHTML, like Gecko) Chrome/27.0.1425.0 Safari/537.32 SUSE/27.0.1425.0 An attempt to "Enable" boot.sysstat in the System Services module of YaST2 fails. Reproducible: Always Steps to Reproduce: 1.Install sysstat-10.0.5-6.1.2.x86_64 2.Run System Services module of YaST2, switch to "Expert mode", select "boot.sysstat", select "Enable the service". Actual Results: A pop-up window with the message "To enable service boot.sysstat in runlevel B, these services must be additionally enabled, because it depends on them: boot.rootfsck, boot.clock, boot.cleanup." Clicking on "Continue" results in another pop-up window "These required services are missing: boot.rootfsck, boot.clock, boot.cleanup." Clicking on "Continue results in nothing. I guess the sysstat package hasn't been properly updated to reflect changes in systemd services. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 849304] New: biber always crashes (segmentation fault)
by bugzilla_noreply＠novell.com 03 Apr '14

03 Apr '14

https://bugzilla.novell.com/show_bug.cgi?id=849304 https://bugzilla.novell.com/show_bug.cgi?id=849304#c0 Summary: biber always crashes (segmentation fault) Classification: openSUSE Product: openSUSE 13.1 Version: RC 2 Platform: Other OS/Version: SUSE Other Status: NEW Severity: Critical Priority: P5 - None Component: Development AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: petersaints(a)gmail.com QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:25.0) Gecko/20100101 Firefox/25.0 I installed texlive-biber on my openSUSE 13.1 RC2 install and everytime I run it (with or without arguments) I get a "Segmentation fault". I have run it through gdb and after a lot of warnings about missing debug libraries I got this: Program received signal SIGSEGV, Segmentation fault. 0x00007ffff7ac69ce in ?? () from /usr/lib/perl5/5.18.1/x86_64-linux-thread-multi/CORE/libperl.so If there is anything else I can do to help you fix this I'll gladly help. In the meantime I'm using the binary provided by the upstream project, which works flawlessly (http://sourceforge.net/projects/biblatex-biber/files/biblatex-biber/1.8/bin…) Reproducible: Always Steps to Reproduce: 1. Install texlive-biber (zypper in texlive-biber) 2. Type biber and any arguments you might need to process the file(s) you want 3. Press enter Actual Results: A Segmentation fault error is printed on the console. Expected Results: It should have not crashed. For example, by using the binary provided upstream, I would get the following output when running with no arguments: Usage: biber [options] file[.bcf] biber [options] --tool <datasource> Creates "file.bbl" using control file "file.bcf" (".bcf" extension is optional). Normaly use with biblatex requires no options as they are all set in biblatex and passed via the ".bcf" file In "tool" mode (see B<--tool> option), takes a datasource (defaults to "bibtex" datasource) and outputs a copy of the datasource with any command-line or config file options applied. Please run "biber --help" for option details I'm running openSUSE 13.1 RC2 x86_64 fully up to date. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 17

[Bug 841958] New: Installer doesn't include "iw" and "wpa-supplicant" be default
by bugzilla_noreply＠novell.com 03 Apr '14

03 Apr '14

https://bugzilla.novell.com/show_bug.cgi?id=841958 https://bugzilla.novell.com/show_bug.cgi?id=841958#c0 Summary: Installer doesn't include "iw" and "wpa-supplicant" be default Classification: openSUSE Product: openSUSE Factory Version: 13.1 Beta 1 Platform: x86-64 OS/Version: SUSE Other Status: NEW Severity: Normal Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: pfederighi(a)yahoo.com QAContact: jsrain(a)suse.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:23.0) Gecko/20100101 Firefox/23.0 The net install finishes and reboots. The final installer (from the hard drive) says that packaged "iw" and "wpa-supplicant" need to be installed in order to configure networking. If you choose to proceed, the installer tries to download them. Oh, the irony. They can be selected manually during the initial installation, but there is nothing to tell the user that they should do so. Also, if the net install is over wifi in the first place, it would make sense that they should automatically be installed. Reproducible: Always Steps to Reproduce: 1. Run the net install over wifi. 2. Don't explicitly select the "iw" and "wpa-supplicant" packages. Actual Results: No wifi connectivity upon installation. Expected Results: Wifi connectivity and internet access. "iw" and "wpa-supplicant" should be installed by default. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 867269] New: yast2 update selects unneeded patches
by bugzilla_noreply＠novell.com 03 Apr '14

03 Apr '14

https://bugzilla.novell.com/show_bug.cgi?id=867269 https://bugzilla.novell.com/show_bug.cgi?id=867269#c0 Summary: yast2 update selects unneeded patches Classification: openSUSE Product: openSUSE 13.1 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: yast2-maintainers(a)suse.de ReportedBy: illumilore(a)gmail.com QAContact: jsrain(a)suse.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:27.0) Gecko/20100101 Firefox/27.0 When launching yast2, on the update tab, it autoselects patches in the unneeded category. By definition, these patches are not needed, so there is no reason to autoselect them, as that is just installing useless patches that waste space, or to even have them selectable at all. Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 863927] New: yast does not offer option to change online check frequency
by bugzilla_noreply＠novell.com 03 Apr '14

03 Apr '14

https://bugzilla.novell.com/show_bug.cgi?id=863927 https://bugzilla.novell.com/show_bug.cgi?id=863927#c0 Summary: yast does not offer option to change online check frequency Classification: openSUSE Product: openSUSE 13.1 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: yast2-maintainers(a)suse.de ReportedBy: illumilore(a)gmail.com QAContact: jsrain(a)suse.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:27.0) Gecko/20100101 Firefox/27.0 Here: http://en.opensuse.org/System_Updates#Configuring_the_KDE_Software_Updater it is described that kde systemsettings can change the update checking frequency, however, no settings option appears in the apper software management from system settings, so therefore, it should be in yast to make up for this apparently removed feature. Otherwise, there is no other GUI method that I know of to change that setting. Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1