June 2013 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 822770] New: Install of grub2-efi failed
by bugzilla_noreply＠novell.com 20 Jun '13

20 Jun '13

https://bugzilla.novell.com/show_bug.cgi?id=822770 https://bugzilla.novell.com/show_bug.cgi?id=822770#c0 Summary: Install of grub2-efi failed Classification: openSUSE Product: openSUSE Factory Version: 13.1 Milestone 0 Platform: x86-64 OS/Version: SUSE Other Status: NEW Severity: Normal Priority: P5 - None Component: Bootloader AssignedTo: jsrain(a)suse.com ReportedBy: nrickert(a)ameritech.net QAContact: jsrain(a)suse.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:21.0) Gecko/20100101 Firefox/21.0 During the initial install, an error window popped up during boot install. It indicated a failure of "mkinitrd". However, "initrd" appears to have been correctly built. I believe it to be a grub2-efi install failure. I managed to get into the system (booting with the grub menu from a 12.3 system). I attempted to reinstall grub2-efi again. There was a similar popup window indicating a grub2-efi install failure. I tried several times, each with the same result. The initial install problem might be related to Bug 812266 comment 6. At least some of my attempts were after fixing that problem, disabling secure boot, and making sure that there would be no nvram conflicts. I'll note that all of the relevant files were installed in "/boot/efi/EFI/opensuse_alt". The NVRAM entry was not installed (probably the cause of the error), and "/boot/grub2/grub.cfg" was not built. I ran "grub2-mkconfig" to correct that latter problem. Shortly after the failure (before booting into the system), I booted the install DVD in rescue mode. I attempted to force-add an NVRAM entry with "efibootmgr -c". There was no error message, but "efibootmgr -v" done immediately afterward showed that no entry had been added. I'm not sure whether that is related. I was able to force-add an entry by booting the 12.3 rescue live CD, and using "efibootmgr -c" from there. Here are a few lines extracted from "y2log": 2013-06-01 17:49:26 <1> nwr8.cs.niu.edu(2407) [pbl] yast-0930.1 Core::UpdateBoot loader.1603: rename /etc/default/grub.new -> /etc/default/grub 2013-06-01 17:49:26 <1> nwr8.cs.niu.edu(2407) [pbl] yast-0930.1 Core::RunCommand .1641: run /usr/sbin/shim-install --config-file=/boot/grub2/grub.cfg >/var/log/Y aST2/y2log_bootloader 2>&1 - ret 256 + output: 2013-06-01 17:49:26 <3> nwr8.cs.niu.edu(2407) [pbl] yast-0930.1 Core::RunCommand.1642: Error: Command '/usr/sbin/shim-install --config-file=/boot/grub2/grub.cfg >/var/log/YaST2/y2log_bootloader 2>&1' failed with code 256 and output: 2013-06-01 17:49:26 <1> nwr8.cs.niu.edu(2407) [YCP] bootloader/routines/lib_iface.ycp:281 return value from updateBootloader: false Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 29

[Bug 654717] New: doc.opensuse.org should use same repo as all the other vhosts on community.o.o
by bugzilla_noreply＠novell.com 20 Jun '13

20 Jun '13

https://bugzilla.novell.com/show_bug.cgi?id=654717 https://bugzilla.novell.com/show_bug.cgi?id=654717#c0 Summary: doc.opensuse.org should use same repo as all the other vhosts on community.o.o Classification: openSUSE Product: openSUSE.org Version: unspecified Platform: Other OS/Version: Other Status: NEW Severity: Minor Priority: P5 - None Component: Infrastructure AssignedTo: jdsn(a)novell.com ReportedBy: jw(a)novell.com QAContact: lrupp(a)novell.com CC: mrueckert(a)novell.com Found By: --- Blocker: --- Most vhosts on community.opensuse.org are maintained in https://svn.berlios.de/svnroot/repos/opensuse/trunk/infrastructure doc.opensuse.org is maintained internally at git.suse.de -- I'd suggest to consolidate this. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 799482] New: Wine crashes when selecting a book from kindle for PC
by bugzilla_noreply＠novell.com 20 Jun '13

20 Jun '13

https://bugzilla.novell.com/show_bug.cgi?id=799482 https://bugzilla.novell.com/show_bug.cgi?id=799482#c0 Summary: Wine crashes when selecting a book from kindle for PC Classification: openSUSE Product: openSUSE 12.2 Version: Final Platform: 64bit OS/Version: openSUSE 12.2 Status: NEW Severity: Normal Priority: P5 - None Component: KDE4 Applications AssignedTo: kde-maintainers(a)suse.de ReportedBy: agustin_guasch(a)yahoo.com QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:18.0) Gecko/20100101 Firefox/18.0 I download kindleForPc.exe. Installed it. After installed, I enter the application, choose a book and the application closes, and a message appears "... caused by wine" Reproducible: Always Steps to Reproduce: 1.Enter the kindle for pc application 2.choose a book 3. application crashes Actual Results: The aplication crashes. Expected Results: The book should be oppenned. n/a -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 825989] New: KUSC/calligra: link/branch it against KUP/calligra
by bugzilla_noreply＠novell.com 20 Jun '13

20 Jun '13

https://bugzilla.novell.com/show_bug.cgi?id=825989 https://bugzilla.novell.com/show_bug.cgi?id=825989#c0 Summary: KUSC/calligra: link/branch it against KUP/calligra Classification: openSUSE Product: openSUSE Factory Version: 13.1 Milestone 2 Platform: Other OS/Version: Other Status: NEW Severity: Enhancement Priority: P5 - None Component: KDE4 Applications AssignedTo: kde-maintainers(a)suse.de ReportedBy: johannesobermayr(a)gmx.de QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.21 (KHTML, like Gecko) rekonq/2.3.0 Safari/537.21 KUP/calligra provides newer snapshots and building against KUSC targets is disabled. So please link/branch KUSC/calligra against KUP/calligra or remove KUSC/calligra and enable building against KUSC targets in KUP/calligra again to keep them in sync. Reproducible: Always -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 0

[Bug 820454] New: [PATCH] systemd assertion fail on running systemd-nspawn on /var/tmp/build-root
by bugzilla_noreply＠novell.com 20 Jun '13

20 Jun '13

https://bugzilla.novell.com/show_bug.cgi?id=820454 https://bugzilla.novell.com/show_bug.cgi?id=820454#c0 Summary: [PATCH] systemd assertion fail on running systemd-nspawn on /var/tmp/build-root Classification: openSUSE Product: openSUSE Factory Version: 13.1 Milestone 0 Platform: Other OS/Version: Other Status: NEW Severity: Critical Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: mvyskocil(a)suse.com QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- Hi Frederic, during a well known IO performance topic, I wanted to check what happens in case something bad happens to systemd as PID1. I did not want to bother with making a full lxc container, so I've just called osc build -x gdb -x strace -x systemd on devel:libraries:c_c++/zlib source code. However the nspawn got aborted with systemd-nspawn -D /var/tmp/build-root /bin/systemd Spawning namespace container on /var/tmp/build-root (console is /dev/pts/5). /etc/localtime is not a symlink, not updating container timezone. systemd 202 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ) Detected virtualization 'systemd-nspawn'. Welcome to Linux! /etc/mtab is not a symlink or not pointing to /proc/self/mounts. This is not supported anymore. Please make sure to replace this file by a symlink to avoid incorrect or misleading mount(8) output. Assertion 'u' failed at src/core/unit.c:1835, function unit_add_dependency_by_name(). Aborting. Caught <ABRT>, dumped core as pid 8. Freezing execution. Looking at core, it was easy to find a guilty code, the backtrace look like #7 0x00000000004785da in unit_add_dependency_by_name (u=0x0, d=d@entry=UNIT_WANTS, name=name@entry=0x48e582 "remote-fs-pre.target", path=path@entry=0x0, add_reference=add_reference@entry=true) at src/core/unit.c:1835 #8 0x0000000000425326 in sysv_parse_insserv_conf (mgr=mgr@entry=0x23cd540, filename=0x48e53a "/etc/insserv.conf") at src/core/service.c:3553 #9 0x0000000000425a05 in sysv_facility_in_insserv_conf (mgr=0x23cd540) at src/core/service.c:3612 #10 service_enumerate (m=0x23cd540) at src/core/service.c:3778 #11 0x000000000040f374 in manager_enumerate (m=0x23cd540) at src/core/manager.c:740 #12 0x0000000000411208 in manager_startup (m=0x23cd540, serialization=0x0, fds=0x7f31e9c25020) at src/core/manager.c:853 #13 0x000000000040aaaf in main (argc=1, argv=0x7fff36cc9878) at src/core/main.c:1629 so the line with a bug is in #ifdef HAVE_SYSV_COMPAT static void sysv_parse_insserv_conf(Manager *mgr, const char* filename) { ... u = manager_get_unit(mgr, SPECIAL_REMOTE_FS_TARGET); unit_add_dependency_by_name(u, UNIT_WANTS, SPECIAL_REMOTE_FS_PRE_TARGET, NULL, true); free (facility); So I'd say attached (untested) fix will help to prevent the issue. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 13

[Bug 819914] New: acpid does not stop during shutdown causing delay
by bugzilla_noreply＠novell.com 20 Jun '13

20 Jun '13

https://bugzilla.novell.com/show_bug.cgi?id=819914 https://bugzilla.novell.com/show_bug.cgi?id=819914#c0 Summary: acpid does not stop during shutdown causing delay Classification: openSUSE Product: openSUSE 12.3 Version: Final Platform: Other OS/Version: openSUSE 12.3 Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: arvidjaar(a)gmail.com QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created an attachment (id=539259) --> (http://bugzilla.novell.com/attachment.cgi?id=539259) systemd debug log of system shutdown User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:20.0) Gecko/20100101 Firefox/20.0 During shutdown acpid does not stop. This causes delay on shutdown/reboot. Here is relevant part of debug log (full output attached): [95319.774268] systemd[1]: Installed new job acpid.service/stop as 2283 [95319.838329] systemd[1]: Merged into installed job acpid.service/stop as 2283 [95323.232067] systemd[1]: Stopping ACPI Event Daemon... [95323.232113] systemd[1]: About to execute /bin/kill -s QUIT $MAINPID [95323.232418] systemd[1]: Forked /bin/kill as 29947 [95323.238150] systemd[1]: acpid.service changed running -> stop [95323.240468] systemd[1]: Received SIGCHLD from PID 29947 (kill). [95323.240506] systemd[1]: Got SIGCHLD for process 29947 (kill) [95323.240618] systemd[1]: Child 29947 died (code=exited, status=0/SUCCESS) [95323.240622] systemd[1]: Child 29947 belongs to acpid.service [95323.240631] systemd[1]: acpid.service: control process exited, code=exited status=0 [95323.242215] systemd[1]: acpid.service got final SIGCHLD for state stop [95323.242347] systemd[1]: acpid.service changed stop -> stop-sigterm [95413.242536] systemd[1]: acpid.service stopping timed out. Killing. [95413.243301] systemd[1]: acpid.service changed stop-sigterm -> stop-sigkill [95413.243341] systemd[1]: Running GC... [95413.256551] systemd[1]: Received SIGCHLD from PID 728 (acpid). [95413.256622] systemd[1]: Got SIGCHLD for process 728 (acpid) [95413.256802] systemd[1]: Child 728 died (code=killed, status=9/KILL) [95413.256813] systemd[1]: Child 728 belongs to acpid.service [95413.256836] systemd[1]: acpid.service: main process exited, code=killed, status=9/KILL [95413.257091] systemd[1]: acpid.service changed stop-sigkill -> failed [95413.259099] systemd[1]: Job acpid.service/stop finished, result=done [95413.259148] systemd[1]: Stopped ACPI Event Daemon. [95413.259170] systemd[1]: Unit acpid.service entered failed state [95413.259279] systemd[1]: Stopping Basic System. Manually running "systemctl stop acpid" in run level 5 works. Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 11

[Bug 804575] New: systemd problem with rbind (and crypto setup?)
by bugzilla_noreply＠novell.com 20 Jun '13

20 Jun '13

https://bugzilla.novell.com/show_bug.cgi?id=804575 https://bugzilla.novell.com/show_bug.cgi?id=804575#c0 Summary: systemd problem with rbind (and crypto setup?) Classification: openSUSE Product: openSUSE 12.3 Version: RC 1 Platform: x86-64 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: koenig(a)linux.de QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- trying to setup dual-boot and chroot for both 12.2 and 12.3-RC1 on my notebook I slipped over a strange systemd problem: the following line in my /etc/fstab /dev /12.2/dev none rbind caused systemd to stop booting with this failure # systemctl | grep fail systemd-cryptsetup(a)cr_ata\x2dHGST_HTS541010A9E680_J810007600B1RA\x2dpart5.service loaded failed failed Cryptography Setup for cr_ata-HGST_HTS541010A9E680_J810007600B1RA-part5 # systemctl status systemd-cryptsetup(a)cr_ata\x2dHGST_HTS541010A9E680_J810007600B1RA\x2dpart5.service systemd-cryptsetup(a)cr_ata\x2dHGST_HTS541010A9E680_J810007600B1RA\x2dpart5.service - Cryptography Setup for cr_ata-HGST_HTS541010A9E680_J810007600B1RA-part5 Loaded: loaded (/etc/crypttab) Active: failed (Result: exit-code) since Tue, 2013-02-19 08:42:31 CET; 6min ago Docs: man:systemd-cryptsetup@.service(8) man:crypttab(5) Process: 965 ExecStop=/usr/lib/systemd/systemd-cryptsetup detach cr_ata-HGST_HTS541010A9E680_J810007600B1RA-part5 (code=exited, status=1/FAILURE) Process: 856 ExecStart=/usr/lib/systemd/systemd-cryptsetup attach cr_ata-HGST_HTS541010A9E680_J810007600B1RA-part5 /dev/disk/by-id/ata-HGST_HTS541010A9E680_J810007600B1RA-part5 none none (code=exited, status=0/SUCCESS) CGroup: name=systemd:/system/systemd-cryptsetup@.service/cr_ata\x2dHGST_HTS541010A9E680_J810007600B1RA\x2dpart5 Feb 19 08:41:10 hl.turtle.de systemd[1]: Started Cryptography Setup for cr_ata-HGST_HTS541010A9E680_J810007600B1RA-part5. Feb 19 08:42:31 hl.turtle.de systemd[1]: Stopped Cryptography Setup for cr_ata-HGST_HTS541010A9E680_J810007600B1RA-part5. Feb 19 08:42:31 hl.turtle.de systemd[1]: Unit systemd-cryptsetup(a)cr_ata\x2dHGST_HTS541010A9E680_J810007600B1RA\x2dpart5.service entered failed state although the cryptsetup stuff worked fine as I could check in the "emergency" shell. this happened both in my 12.2 system and in the 12.3-RC1 !! after removing/changing that rbind line for /dev startup with systemd worked again! running mount --rbind /dev /12.2/dev worked without a problem. more details to my (somewhat non-standard;) setup: basis is a plain 12.2 installation with encrypted LVM in sda5 containing everything but the boot partition: # fdisk -l /dev/sda Device Boot Start End Blocks Id System /dev/sda3 * 312578048 314697727 1059840 83 Linux /dev/sda4 314697728 1953523711 819412992 f W95 Ext'd (LBA) /dev/sda5 314699776 1363275775 524288000 8e Linux LVM there are LVMs root-12.2 and root-12.3 (later was a copy of root-12.2 which I then updated to 12.3-RC1). /boot is used for both distro roots together. in such "dual boot" systems I typically mount the "other" root partiton into /12.2 or /12.3 with proc sys dev etc. in place to be able to chroot into the old/new system for tests. for the 12.3 system I tried to setup the 12.2 chroot in fstab with /dev/system/root-12.2 /12.2 ext4 acl,user_xattr 1 1 /boot /12.2/boot none rbind /proc /12.2/proc none rbind /sys /12.2/sys none rbind /dev /12.2/dev none rbind thouse rbinds work fine on the command line, and at least they worked before in fstab without systemd. but now the last line for /dev caused that strange boot trouble:-( now I'm using this slightly more complex fstab entries to avoid rbind and similar trouble: /dev/system/root-12.2 /12.2 ext4 acl,user_xattr 1 1 /boot /12.2/boot none rbind proc /12.2/proc proc defaults 0 0 sysfs /12.2/sys sysfs noauto 0 0 debugfs /12.2/sys/kernel/debug debugfs noauto 0 0 usbfs /12.2/proc/bus/usb usbfs noauto 0 0 /dev /12.2/dev none bind devpts /12.2/dev/pts devpts mode=0620,gid=5 0 0 any clue what happens in systemd for my rbind /dev/ entry ? how can I provide more debug data ? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 15

[Bug 796171] New: On shutdown /var/lib/nfs/rpc_pipefs cannot be unmounted because it is busy
by bugzilla_noreply＠novell.com 20 Jun '13

20 Jun '13

https://bugzilla.novell.com/show_bug.cgi?id=796171 https://bugzilla.novell.com/show_bug.cgi?id=796171#c0 Summary: On shutdown /var/lib/nfs/rpc_pipefs cannot be unmounted because it is busy Classification: openSUSE Product: openSUSE 12.2 Version: Final Platform: x86-64 OS/Version: openSUSE 12.2 Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: suse(a)bugs.jan.ritzerfeld.org QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.24 (KHTML, like Gecko) Chrome/26.0.1371.0 Safari/537.24 SUSE/26.0.1371.0 On every shutdown, umount always complains that it cannot unmount /var/lib/nfs/rpc_pipefs because the target is busy. I am using autofs to mount some NFS shares. I attach the systemd-journalctl output for a shutdown. Reproducible: Always -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 15

[Bug 793411] New: systemd doesn't recognize continuation lines in environment files /etc/sysconfig/xxxx
by bugzilla_noreply＠novell.com 20 Jun '13

20 Jun '13

https://bugzilla.novell.com/show_bug.cgi?id=793411 https://bugzilla.novell.com/show_bug.cgi?id=793411#c0 Summary: systemd doesn't recognize continuation lines in environment files /etc/sysconfig/xxxx Classification: openSUSE Product: openSUSE 12.2 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: per(a)computer.org QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux i686 on x86_64; rv:11.0) Gecko/20100101 Firefox/11.0 I'm updating some stuff to work on 12.2 with systemd, and it looks like systemd doesn't recognize continuation lines in /etc/sysconfig/xxxx ? For instance, I copied over the following from the previous system: SPAMD_ARGS="--socketpath=/var/lib/bulwark/spamd \ --nouser-config \ --virtual-config-dir=/var/lib/bulwark/domains/%l/%d \ --siteconfigpath=/var/lib/bulwark/config \ --username=bulwark \ --max-children=25 \ --timeout-child=600" When I tried to start the spamd service, it failed: spamd[4547]: warn: Unknown option: -socketpath SPAMD_ARGS only went as far as "--socketpath=/var/lib/bulwark/spamd \", the rest was ignored. Reproducible: Always -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 33

[Bug 820975] New: Default firewall rules prevent browsing network shares in Nautilus.
by bugzilla_noreply＠novell.com 20 Jun '13

20 Jun '13

https://bugzilla.novell.com/show_bug.cgi?id=820975 https://bugzilla.novell.com/show_bug.cgi?id=820975#c0 Summary: Default firewall rules prevent browsing network shares in Nautilus. Classification: openSUSE Product: openSUSE 12.3 Version: Final Platform: Other OS/Version: openSUSE 12.3 Status: NEW Severity: Normal Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: marb(a)jabster.pl QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:20.0) Gecko/20100101 Firefox/20.0 After openSUSE installation using Gnome, Nautilus -> Browse Network doesn't display local shares. I can still access SMB shares if I use Nautilus -> Connect to Server -> smb://ASUS. Additionally Yast -> Printer and hp-setup can't find shared printer: marb@opensuse:~> hp-setup -i HP Linux Imaging and Printing System (ver. 3.12.11) Printer/Fax Setup Utility ver. 9.0 Copyright (c) 2001-14 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. (Note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.) -------------------------------- | SELECT CONNECTION (I/O) TYPE | -------------------------------- Num Connection Description Type -------- ---------- ---------------------------------------------------------- 0* usb Universal Serial Bus (USB) 1 net Network/Ethernet/Wireless (direct connection or JetDirect) 2 par Parallel Port (LPT:) Enter number 0...2 for connection type (q=quit, enter=usb*) ? 1 Using connection type: net error: No device selected/specified or that supports this functionality. If I turn off firewall I can browse network shares in Nautilus, and hp-setup sees the printer: marb@opensuse:~> hp-setup -i HP Linux Imaging and Printing System (ver. 3.12.11) Printer/Fax Setup Utility ver. 9.0 Copyright (c) 2001-14 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. (Note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.) -------------------------------- | SELECT CONNECTION (I/O) TYPE | -------------------------------- Num Connection Description Type -------- ---------- ---------------------------------------------------------- 0* usb Universal Serial Bus (USB) 1 net Network/Ethernet/Wireless (direct connection or JetDirect) 2 par Parallel Port (LPT:) Enter number 0...2 for connection type (q=quit, enter=usb*) ? 1 Using connection type: net Using device: hp:/net/Photosmart_5510_series?zc=HP063F46 Setting up device: hp:/net/Photosmart_5510_series?zc=HP063F46 Reproducible: Always -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3