February 2013 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 731356] New: System won't install on HP DL380 (Smart Array 6i problem)
by bugzilla_noreply＠novell.com 16 Feb '13

16 Feb '13

https://bugzilla.novell.com/show_bug.cgi?id=731356 https://bugzilla.novell.com/show_bug.cgi?id=731356#c0 Summary: System won't install on HP DL380 (Smart Array 6i problem) Classification: openSUSE Product: openSUSE 12.1 Version: Final Platform: x86-64 OS/Version: SuSE Other Status: NEW Severity: Major Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: claudio.prono(a)atpss.net QAContact: jsrain(a)suse.com Found By: --- Blocker: --- Created an attachment (id=462909) --> (http://bugzilla.novell.com/attachment.cgi?id=462909) boot.msg of failed installer. User-Agent: Mozilla/5.0 (Windows NT 6.0; rv:8.0) Gecko/20100101 Firefox/8.0 I have encountered some difficulties installing OpenSuSE 12.1 x64 on a HP DL380 Server. During the installation, no disks are detected. I have a bit investigated on this issue, and found an error into the /var/log/boot.log: <6>[ 1.921227] cciss 0000:04:03.0: PCI IRQ 51 -> rerouted to legacy IRQ 19 <6>[ 1.921262] cciss 0000:04:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 <4>[ 1.921363] cciss 0000:04:03.0: Controller reports max supported commands of 0, an obvious lie. Using 16. Ensure that firmware is up to date. <3>[ 2.004219] cciss 0000:04:03.0: Unable to get irq 19 for cciss0 <4>[ 2.004309] cciss: probe of 0000:04:03.0 failed with error -1 The solution i have found is specify noapic, acpi=off into the kernel parameters, and the system installs perfectly. After the installation, for booting the installed system i have also added noapic, acpi=off on the kernel boot parameters, or it don't boot. I have tested this problem only on the Kernel-desktop, the Kernel-default finish the boot without problems. Here is my lspci: 00:00.0 Host bridge: Intel Corporation E7520 Memory Controller Hub (rev 0c) Subsystem: Compaq Computer Corporation Device 3200 Flags: bus master, fast devsel, latency 0 Capabilities: [40] Vendor Specific Information: Len=05 <?> 00:02.0 PCI bridge: Intel Corporation E7525/E7520/E7320 PCI Express Port A (rev 0c) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=04, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: fde00000-fdffffff Prefetchable memory behind bridge: 0000000040000000-00000000400fffff Capabilities: [50] Power Management version 2 Capabilities: [58] MSI: Enable- Count=1/2 Maskable- 64bit- Capabilities: [64] Express Root Port (Slot-), MSI 00 Kernel driver in use: pcieport 00:06.0 PCI bridge: Intel Corporation E7520 PCI Express Port C (rev 0c) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=0c, sec-latency=0 Capabilities: [50] Power Management version 2 Capabilities: [58] MSI: Enable- Count=1/2 Maskable- 64bit- Capabilities: [64] Express Root Port (Slot+), MSI 00 Kernel driver in use: pcieport 00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI]) Subsystem: Compaq Computer Corporation Device 3201 Flags: bus master, medium devsel, latency 0, IRQ 16 I/O ports at 5000 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI]) Subsystem: Compaq Computer Corporation Device 3201 Flags: bus master, medium devsel, latency 0, IRQ 19 I/O ports at 5020 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI]) Subsystem: Compaq Computer Corporation Device 3201 Flags: bus master, medium devsel, latency 0, IRQ 18 I/O ports at 5040 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI]) Subsystem: Compaq Computer Corporation Device 3201 Flags: bus master, medium devsel, latency 0, IRQ 16 I/O ports at 5060 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI]) Subsystem: Compaq Computer Corporation Device 3201 Flags: bus master, medium devsel, latency 0, IRQ 23 Memory at fbef0000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port: BAR=1 offset=00a0 Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 00001000-00003fff Memory behind bridge: fbf00000-fcffffff Prefetchable memory behind bridge: 40100000-401fffff 00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02) Flags: bus master, medium devsel, latency 0 00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: Compaq Computer Corporation Device 3201 Flags: bus master, medium devsel, latency 0, IRQ 255 I/O ports at 01f0 [size=8] I/O ports at 03f4 [size=1] I/O ports at 0170 [size=8] I/O ports at 0374 [size=1] I/O ports at 0500 [size=16] Memory at 40200000 (32-bit, non-prefetchable) [size=1K] Kernel driver in use: ata_piix 01:03.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) (prog-if 00 [VGA controller]) Subsystem: Compaq Computer Corporation Proliant Rage XL Flags: bus master, stepping, medium devsel, latency 64 Memory at fc000000 (32-bit, non-prefetchable) [size=16M] I/O ports at 3000 [size=256] Memory at fbff0000 (32-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at 40100000 [disabled] [size=128K] Capabilities: [5c] Power Management version 2 01:04.0 System peripheral: Compaq Computer Corporation Integrated Lights Out Controller (rev 01) Subsystem: Compaq Computer Corporation Device b206 Flags: medium devsel, IRQ 4 I/O ports at 1800 [size=256] Memory at fbfe0000 (32-bit, non-prefetchable) [size=512] Capabilities: [f0] Power Management version 2 01:04.2 System peripheral: Compaq Computer Corporation Integrated Lights Out Processor (rev 01) Subsystem: Compaq Computer Corporation Device b206 Flags: bus master, stepping, medium devsel, latency 64, IRQ 3 I/O ports at 3400 [size=256] Memory at fbfd0000 (32-bit, non-prefetchable) [size=2K] Memory at fbfc0000 (32-bit, non-prefetchable) [size=8K] Memory at fbf00000 (32-bit, non-prefetchable) [size=512K] [virtual] Expansion ROM at 40120000 [disabled] [size=64K] Capabilities: [f0] Power Management version 2 02:00.0 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge A (rev 09) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=02, secondary=03, subordinate=03, sec-latency=64 Memory behind bridge: fde00000-fdefffff Capabilities: [44] Express PCI/PCI-X Bridge, MSI 00 Capabilities: [5c] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [6c] Power Management version 2 Capabilities: [d8] PCI-X bridge device 02:00.2 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge B (rev 09) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=02, secondary=04, subordinate=04, sec-latency=64 I/O behind bridge: 00004000-00004fff Memory behind bridge: fdf00000-fdffffff Prefetchable memory behind bridge: 0000000040000000-00000000400fffff Capabilities: [44] Express PCI/PCI-X Bridge, MSI 00 Capabilities: [5c] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [6c] Power Management version 2 Capabilities: [d8] PCI-X bridge device 03:01.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 10) Subsystem: Compaq Computer Corporation NC7782 Gigabit Server Adapter (PCI-X, 10,100,1000-T) Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17 Memory at fdef0000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at <ignored> [disabled] Capabilities: [40] PCI-X non-bridge device Capabilities: [48] Power Management version 2 Capabilities: [50] Vital Product Data Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+ Kernel driver in use: tg3 03:01.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 10) Subsystem: Compaq Computer Corporation NC7782 Gigabit Server Adapter (PCI-X, 10,100,1000-T) Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18 Memory at fdee0000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] PCI-X non-bridge device Capabilities: [48] Power Management version 2 Capabilities: [50] Vital Product Data Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+ Kernel driver in use: tg3 04:03.0 RAID bus controller: Compaq Computer Corporation Smart Array 64xx (rev 01) Subsystem: Compaq Computer Corporation Smart Array 6i Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19 Memory at fdff0000 (64-bit, non-prefetchable) [size=8K] I/O ports at 4000 [size=256] Memory at fdf80000 (64-bit, non-prefetchable) [size=256K] [virtual] Expansion ROM at 40000000 [disabled] [size=256K] Capabilities: [d0] Power Management version 2 Capabilities: [dc] PCI-X non-bridge device Capabilities: [f0] Vital Product Data 05:00.0 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge A (rev 09) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=05, secondary=06, subordinate=09, sec-latency=64 Capabilities: [44] Express PCI/PCI-X Bridge, MSI 00 Capabilities: [5c] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [6c] Power Management version 2 Capabilities: [d8] PCI-X bridge device 05:00.2 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge B (rev 09) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=05, secondary=0a, subordinate=0c, sec-latency=64 Capabilities: [44] Express PCI/PCI-X Bridge, MSI 00 Capabilities: [5c] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [6c] Power Management version 2 Capabilities: [d8] PCI-X bridge device Reproducible: Always Steps to Reproduce: 1. Default install on an HP DL360 2. 3. Actual Results: Default install Expected Results: The installer system don't see any hard disk on the Smart Array 6i controller. The kernel module cciss is loaded. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 728872] New: no grafical interface after kernel update with nvidia grafic
by bugzilla_noreply＠novell.com 16 Feb '13

16 Feb '13

https://bugzilla.novell.com/show_bug.cgi?id=728872 https://bugzilla.novell.com/show_bug.cgi?id=728872#c0 Summary: no grafical interface after kernel update with nvidia grafic Classification: openSUSE Product: openSUSE 12.1 Version: RC 2 Platform: i586 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: barthel.daniel(a)gmail.com QAContact: qa(a)suse.de Found By: Beta-Customer Blocker: --- after todays kernel update (to kernel 3.1.0-1.2.1 (RC1) only got a text-interface after reboot, no grafical interface, with nvidia grafic, unless i manually installed nvidia grafic driver. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 777397] New: Kernel panic using /dev/video0 for second time
by bugzilla_noreply＠novell.com 16 Feb '13

16 Feb '13

https://bugzilla.novell.com/show_bug.cgi?id=777397 https://bugzilla.novell.com/show_bug.cgi?id=777397#c0 Summary: Kernel panic using /dev/video0 for second time Classification: openSUSE Product: openSUSE 12.2 Version: RC 2 Platform: x86-64 OS/Version: openSUSE 12.2 Status: NEW Severity: Critical Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: sytabaresa(a)gmail.com QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created an attachment (id=503505) --> (http://bugzilla.novell.com/attachment.cgi?id=503505) the snapshots for User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:13.0) Gecko/20100101 Firefox/13.0.1 when used a second time the device /dev/video0 in a program for the webcam, for example cheese or vlc, a kernel panic occurs completely blocking the computer cuando se usa por segunda vez el dispositivo /dev/video0 en un programa para la webcam, por ejemplo cheese o vlc, ocurre un kernel panic bloqueando totalmente el computador Reproducible: Always Steps to Reproduce: 1.use a program for the webcam, such as vlc. 2.use the menu Media > Open Capture Device 3.select the capture device /dev/video0 and click Play 4.this play the webcam image, after this click "stop playback" 5.click "Play" 3. Actual Results: Kernel panic occurs at the instant you use for second time the /dev/video0 ( webcam ) device Expected Results: use two, three or more times the webcam without the kernel panic occurs i use a laptop lenovo ideapad y450 with a "BISON Corporation Lenovo EasyCamera" as a webcam, in the attachment are the snapshots and the hardware components. in opensuse 12.1 don't occurs the kernel panic -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 768551] New: Memory card reader don't work with kernel 3, only with kernel 2.6
by bugzilla_noreply＠novell.com 16 Feb '13

16 Feb '13

https://bugzilla.novell.com/show_bug.cgi?id=768551 https://bugzilla.novell.com/show_bug.cgi?id=768551#c0 Summary: Memory card reader don't work with kernel 3, only with kernel 2.6 Classification: openSUSE Product: openSUSE 12.1 Version: Final Platform: x86 OS/Version: openSUSE 12.1 Status: NEW Severity: Critical Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: andrecamargowork(a)gmail.com QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux i686) AppleWebKit/536.5 (KHTML, like Gecko) Chrome/19.0.1084.56 Safari/536.5 I have instaled opensuse 12.1 and the memory cards don't works. i try every possible ways, search for the problem on internet and nothing help me to solve the problem. in this time i used windows to write my cards. and then i try to retroced my kernel. i went to opensuse 11.4 repository and download the kernel 2.6... install and reboot the system, the mmc begin to work automatic. Reproducible: Always Steps to Reproduce: 1.install opensuse 12.1 2.try to use mmc 3.nothing happens 4 install kernel 2.6 from opensuse 11.4 5 try to use mmc 6 works perfectly Actual Results: 1.install opensuse 12.1 2.try to use mmc 3.nothing happens 4 install kernel 2.6 from opensuse 11.4 5 try to use mmc 6 works perfectly Expected Results: mmc should work on kernel 3.1 administrador@ThinpleSuse-First:~> lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 0db0:6877 Micro Star International RT2573 Bus 002 Device 002: ID 0603:1605 Novatek Microelectronics Corp. ThinpleSuse-First:/home/administrador # lspci 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945 Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940L Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GMLxpress Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audioontroller (rev 02) 00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev2) 00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev2) 00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller1 (rev 02) 00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller2 (rev 02) 00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller3 (rev 02) 00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller4 (rev 02) 00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controlle(rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (v 02) 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Ctroller (rev 02) 00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02) 01:0a.0 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) 01:0a.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 0 01:0a.3 Mass storage controller: O2 Micro, Inc. Integrated MS/xD Controller (r 01) 06:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E Gigab Ethernet Controller (rev 20) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 756922] New: Kernel Panic after reboot when successful installed
by bugzilla_noreply＠novell.com 16 Feb '13

16 Feb '13

https://bugzilla.novell.com/show_bug.cgi?id=756922 https://bugzilla.novell.com/show_bug.cgi?id=756922#c0 Summary: Kernel Panic after reboot when successful installed Classification: openSUSE Product: openSUSE 12.2 Version: Milestone 3 Platform: x86-64 OS/Version: openSUSE 12.2 Status: NEW Severity: Critical Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: fbernasek(a)netscape.net QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created an attachment (id=485934) --> (http://bugzilla.novell.com/attachment.cgi?id=485934) Kernel Panic Picture after Install openSUSE 12.2 M3 x86_64 Build 315 DVD User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:11.0) Gecko/20100101 Firefox/11.0 i'm download openSUSE 12.2 M3 x86_64 Build 315 DVD, install without problems. After reboot the same problem as in further releases Kernel - Panic Reproducible: Always Steps to Reproduce: 1. download openSUSE 12.2 M3 x86_64 Build 315 DVD 2. install them 3. sucessful 4. reboot to continue 5. Kernel panic nothing goes on Actual Results: Kernel panic Expected Results: normal boot and use of M3 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 8

[Bug 739081] New: [12.1] bug: scheduling while atomic: jbd2/sda7-8
by bugzilla_noreply＠novell.com 16 Feb '13

16 Feb '13

https://bugzilla.novell.com/show_bug.cgi?id=739081 https://bugzilla.novell.com/show_bug.cgi?id=739081#c0 Summary: [12.1] bug: scheduling while atomic: jbd2/sda7-8 Classification: openSUSE Product: openSUSE 12.1 Version: Final Platform: PC OS/Version: SuSE Other Status: NEW Severity: Critical Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: veehexx(a)gmail.com QAContact: qa(a)suse.de Found By: --- Blocker: --- Created an attachment (id=469360) --> (http://bugzilla.novell.com/attachment.cgi?id=469360) photo of Panic message User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:9.0) Gecko/20100101 Firefox/9.0 i keep getting random Panics when i resume-from-hibernate (resume-from-suspend doesnt seem to have any Panics). the latest one is 'bug: scheduling while atomic: jbd2/sda7-8'. aside from resume-from-hibernate issues, nothing else is to note - i do a bit of web surfing, and media streaming. i've been unable to pin point a cause, i do have Kernel Panics every 5-10 resumes, they seem random and not always the same. i dual boot both opensuse 12.1 x64, and win7 SP1 x64, Grub is the default boot loader. Windows experiences no issues at all. hardware is an Acer 4820t with intel core-i graphics and using whatever comes with openSUSE 12.1. i've attached a photo of the issue (sorry it's a bit blurry!) /dev/sda7 is formatted as ext4. system details: #uname -a Linux linux-decj.site 3.1.0-1.2-desktop #1 SMP PREEMPT Thu Nov 3 14:45:45 UTC 2011 (187dde0) x86_64 x86_64 x86_64 GNU/Linux #df /dev/sda7 Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda7 37751320 4132560 32583208 12% /home Reproducible: Couldn't Reproduce Steps to Reproduce: 1. 2. 3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 726751] New: System successfully reboot into stage 2 of installation
by bugzilla_noreply＠novell.com 16 Feb '13

16 Feb '13

https://bugzilla.novell.com/show_bug.cgi?id=726751 https://bugzilla.novell.com/show_bug.cgi?id=726751#c0 Summary: System successfully reboot into stage 2 of installation Classification: openSUSE Product: openSUSE 12.1 Version: RC 1 Platform: x86 OS/Version: SuSE Other Status: NEW Severity: Critical Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: howard.bryan.webb(a)gmail.com QAContact: jsrain(a)suse.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:7.0.1) Gecko/20100101 Firefox/7.0.1 Not sure if this is a yast problem, a kernel problem, an installation problem, or some other problem. Reroute component as you see fit. I've got a multi-boot system: 11.4, 12.1 RC1 ISO on USB stick, and 12.1 RC1 (I hope to reliably install) Desired partitioning for this install: / on /dev/sda5, swap on /dev/sdb10 I booted the USB stick ISO /dev/sdc1 to install 12.1 RC1. Changed its default partitioning so that / was on /dev/sda5, under an extended partition. (incidentally, I've got WinXP on /dev/sda1, so I really don't want to screw that up). After the formatting and copying of default KDE setup files, and successful stage 1 install completion, the system pops up a 10 seconds to reboot popup. System reboots. System never completes the reboot into the 2nd stage install. As it starts to boot, it says (I hope you look at this seriously, because I'm typing this by hand): root (hd1,4) Filesystem type is ext2fs, partition type 0x83 kernel /boot/vmlinuz-3.1.0-rc9-1-default root=/dev/disk/by-id/ata-WDC_WD3200AA JB-00WGA0-WD-WCARW6176241-part5 resume=/dev/disk/by-id/ata-MAXTOR_STM3320620AS_ 3QF0Y2G1-part10 splash=silent quiet [Linux-bzImage, setup=0x4200, size=0x4481e0] initrd /boot/initrd-3.1.0-rc9-1-default [Linux-initrd @ 0x37394000, 0xc5baa6 bytes] [ 3.762488] /usr/src/packages/BUILD/kernel-default-3.1.rc9/linux-3.1-rc9/driv ers/rtc/hctosys.c: unable to open rtc device (rtc0) doing fast boot Creating device nodes with udev [ 4.522668] [drm] nouveau 0000:01:00.0: mem timing table length unknown: 14 Trying manual resume from /dev/disk/by-id/ata-MAXTOR_STM3320620AS_ 3QF0Y2G1-part10 resume device /dev/disk/by-id/ata-MAXTOR_STM3320620AS_ 3QF0Y2G1-part10 not found (ignoring) Trying manual resume from /dev/disk/by-id/ata-MAXTOR_STM3320620AS_ 3QF0Y2G1-part10 resume device /dev/disk/by-id/ata-MAXTOR_STM3320620AS_3QF0Y2G1-part10 not found (ignoring) Waiting for device /dev/disk/by-id/ata-WDC_WD3200AA JB-00WGA0-WD-WCARW6176241-part5 to appear: [ 5.396330] hub 1-0:1.0: unable to enumerate USB device on port 6 .................................. Could not find /dev/disk/by-id/ata-WDC_WD3200AAJB-00WGA0-WD-WCARW6176241-part5 Want me to fall back to /dev/disk/by-id/ata-WDC_WD3200AAJB-00WGA0-WD-WCARW6176241-part5? (Y/n) n not found -- exiting to /bin/sh sh: cannot set terminal process group (-1): Inappropriate ioctl for device sh: no job control in this shell $ The same hardware boots successfully: (1) Windows XP (2) Suse 11.4 (been using it for a month with no problems) (3) Before Suse 11.4, I had Suse 11.2 on it for more than 1.5 years The suse 11.2/11.4 installations on this hardware have been my main system. I believe the hardware to be quite reliable with them; this appears to be a regression with 12.1 RC1. I was able to successfully install this RC1 on this system 1 time, and use it for about a day. I had noticed a problem during the stage 2 install (network install not finding release notes), which I was attempting to duplicate when this started failing. It has repeatedly/continuously failed about 5 times in a row as described above. I have reverified the h/w is OK by (1) booting up XP and running chkdsk /R without problem, and (2) booting up suse 11.4 multiple times (from /dev/sdb) and adding my suse 12.1 RC1 install /dev/sda5 to my mounttab as /121. /121 is perfectly visible/accessible from suse 11.4 As I said, I believe the hardware to be quite reliable with all other OSs I've tried; this appears to be a regression with 12.1 RC1. Reproducible: Always Steps to Reproduce: 1. Boot to install suse 12.1 RC1 ISO image 2. Complete stage 1 install, do reboot 3. Note that boot process fails before Stage 2 installation takes control Actual Results: See details above; rtc not found, disk not found (even though the image being executed came from that disk) Expected Results: being presented with the Stage 2 suse installation process -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 5

[Bug 722135] New: the gauge kernel boot does not work.
by bugzilla_noreply＠novell.com 16 Feb '13

16 Feb '13

https://bugzilla.novell.com/show_bug.cgi?id=722135 https://bugzilla.novell.com/show_bug.cgi?id=722135#c0 Summary: the gauge kernel boot does not work. Classification: openSUSE Product: openSUSE 12.1 Version: Beta 1 Platform: x86-64 OS/Version: SuSE Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: contact(a)serge-muscat.com QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:7.0.1) Gecko/20100101 Firefox/7.0.1 When starting the computer and the kernel is loaded, the gauge indicating the progress remains static. Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 730183] New: Kernel panic during startup
by bugzilla_noreply＠novell.com 16 Feb '13

16 Feb '13

https://bugzilla.novell.com/show_bug.cgi?id=730183 https://bugzilla.novell.com/show_bug.cgi?id=730183#c0 Summary: Kernel panic during startup Classification: openSUSE Product: openSUSE 12.1 Version: Final Platform: i586 OS/Version: Other Status: NEW Severity: Critical Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: st-malcolm.moore(a)whsg.info QAContact: qa(a)suse.de Found By: --- Blocker: --- Created an attachment (id=461905) --> (http://bugzilla.novell.com/attachment.cgi?id=461905) photo of crash User-Agent: Mozilla/5.0 (X11; Linux i686; rv:8.0) Gecko/20100101 Firefox/8.0 Kernel panic on startup 12.1 RC2 and later when using D865GLC Intel board and Hyper threading P4 processor Reproducible: Always Steps to Reproduce: 1. Install openSuse 12.1 RC2 ( have to use maxcpus=1 during install ) 2. remove maxcpus=1 from bootloader after install 3. zypper dup Actual Results: Machine no longer starts with kernel panic Expected Results: Machine starts Will start about 1 in 10 attempts. Once running everything works as expected Does not happen on D865GLC board with single core P4 Reproduced on several HT machines of the same spec. Disable hyper threading in bios and the machine works Have tried core 2 and core I3 machines and all work OK -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 6

[Bug 795837] New: Nvidia drivers don't compile with 3.7 kernel from Tumbleweed repo.
by bugzilla_noreply＠novell.com 16 Feb '13

16 Feb '13

https://bugzilla.novell.com/show_bug.cgi?id=795837 https://bugzilla.novell.com/show_bug.cgi?id=795837#c0 Summary: Nvidia drivers don't compile with 3.7 kernel from Tumbleweed repo. Classification: openSUSE Product: openSUSE 12.2 Version: Final Platform: x86-64 OS/Version: openSUSE 12.2 Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: pilotgi(a)gmail.com QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.11 (KHTML, like Gecko) Chrome/23.0.1271.97 Safari/537.11 Tonight I installed kernel-desktop-3.7.1-16.1 from the Tumbleweed repo. I then attempted to build the nvidia driver 310.19, which failed. Here are some of the errors reported by the nvidia installer: "Make sure you have configured kernel sources matching your kernel." "You may need to specify the location of kernel-source or kernel headers with the SYSSRC environment variable or the equivalent nvidia-installer command line option." I have these kernel packages installed: kernel-default-devel-3.7.1-16.1.x86_64 kernel-source-3.7.1-16.1.noarch kernel-desktop-devel-3.7.1-16.1.x86_64 kernel-firmware-20120719git-2.9.1.noarch kernel-syms-3.7.1-16.1.x86_64 kernel-devel-3.7.1-16.1.noarch kernel-desktop-3.7.1-16.1.x86_64 kernel-xen-devel-3.7.1-16.1.x86_64 There appears to be a problem with the 3.7 kernel and nvidia, as the 3.6 kernels worked fine. Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 9