April 2012 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 505546] New: Grub fails to write bootrecord on dmraid disk (GPT labeled)
by bugzilla_noreply＠novell.com 16 Aug '16

16 Aug '16

http://bugzilla.novell.com/show_bug.cgi?id=505546 User Winfrid.Tschiedel(a)ts.fujitsu.com added comment http://bugzilla.novell.com/show_bug.cgi?id=505546#c500322 Summary: Grub fails to write bootrecord on dmraid disk (GPT labeled) Classification: openSUSE Product: openSUSE 11.2 Version: Milestone 1 Platform: x86-64 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: Winfrid.Tschiedel(a)ts.fujitsu.com QAContact: jsrain(a)novell.com Found By: --- Created an attachment (id=293215) --> (http://bugzilla.novell.com/attachment.cgi?id=293215) saved installation logs User-Agent: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; Tablet PC 1.7; .NET CLR 1.0.3705; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022; MS-RTC LM 8; InfoPath.2) I tried to install openSUSE 11.2 Milestone 1 on Fujitsu Primergy RX220 ( Promise FastTrak TX 150 S4 ), one disk with RAID0, GPT labeled ( Same problem exists also on Fujitsu Primergy rx200s4 with ESB2 (LSI Firmware) and one disk RAID0. Installation works until the boot record should be written. In case of rx220 the boot record should be written to the root partition. Beside the error 22: No such partition also the MBR was destroyed. Reproducible: Always Steps to Reproduce: 1. Installed openSUSE 11.2 on fake raid with GPT Actual Results: No boot redord was written Expected Results: Correct operation, install a system which can be booted afterwards In the latest release of fedora 11 (Preview) almost everything works out of the box, which means only manual interaction for the following items is needed : mklabel gpt (no botton for writing new partition table!) mkinitrd on distribution is in error for details please read #500322 (bugzilla.redhat.com) I tried to write a new bootrecord with fedora 11 - which worked - but openSUSE 11.2 cannot handle this bootrecord - so chainloading failed . Next I tried to load the openSUSE boot menu with configfile /boot/grub/menu.lst So I could start openSUSE 11.2, but boot fails because root partition is not found. This seems to be similar to #500979 - with one difference that at that time (SLED 11) only the problem on ESB2 occurred. There is also a second difference, in the previous edition (openSUSE 11.1,SLED 11) there was a problem with GPT and dmraid, which ended up, that the RAID information was destroyed (please see #436825 ) -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 13

[Bug 741521] New: Spice client disconnect crashes qemu-kvm
by bugzilla_noreply＠novell.com 16 Aug '16

16 Aug '16

https://bugzilla.novell.com/show_bug.cgi?id=741521 https://bugzilla.novell.com/show_bug.cgi?id=741521#c0 Summary: Spice client disconnect crashes qemu-kvm Classification: openSUSE Product: openSUSE 11.4 Version: Final Platform: x86-64 OS/Version: openSUSE 11.4 Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: gvenkat(a)attglobal.net QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux i686; rv:9.0) Gecko/20100101 Firefox/9.0 When spice-client was terminated on a remote client, the VM shutdown with an exception. System kvm-1.0-131.1.x86_64 libspice-server1-0.10.0-28.1.x86_64 Client spice-client-0.10.0-28.1.i586 Reproducible: Didn't try Steps to Reproduce: 1. Don't know how to reproduce. Only happened once in a situation (closing spice client) that has worked every time before. 2. 3. Actual Results: The VM was shutdown Expected Results: The VM should have stayed up so that the SPICE client could connect again This was reported in the log for the VM related to this crash red_channel_client_disconnect: 0x7f9460033f80 (channel 0x7f9503fb2c80 type 1 id 0) main_channel_client_on_disconnect: rcc=0x7f9460033f80 reds_client_disconnect: red_client_destroy: destroy client with #channels 4 red_channel_client_disconnect: 0x7f9460046a00 (channel 0x7f9503fbd240 type 3 id 0) red_channel_client_disconnect: 0x7f9508ebc400 (channel 0x7f95074c16d0 type 2 id 0) red_channel_remove_client: ASSERT pthread_equal(pthread_self(), rcc->channel->thread_id) failed red_channel_client_disconnect: 0x7f950877ac80 (channel 0x7f950487b830 type 4 id 0) Thread 9 (Thread 0x7f94f8712700 (LWP 13630)): #0 0x00007f9500b7cea4 in __lll_lock_wait () from /lib64/libpthread.so.0 #1 0x00007f9500b78294 in _L_lock_999 () from /lib64/libpthread.so.0 #2 0x00007f9500b780aa in pthread_mutex_lock () from /lib64/libpthread.so.0 #3 0x00007f950312d349 in ?? () #4 0x00007f95031c35c9 in ?? () #5 0x00007f95031992d1 in ?? () #6 0x00007f9500b75a3f in start_thread () from /lib64/libpthread.so.0 #7 0x00007f94ffc1e71d in clone () from /lib64/libc.so.6 #8 0x0000000000000000 in ?? () Thread 8 (Thread 0x7f94f7f11700 (LWP 13631)): #0 0x00007f94ffc16d87 in ioctl () from /lib64/libc.so.6 #1 0x00007f95031c3479 in ?? () #2 0x00007f95031c35c1 in ?? () #3 0x00007f95031992d1 in ?? () #4 0x00007f9500b75a3f in start_thread () from /lib64/libpthread.so.0 #5 0x00007f94ffc1e71d in clone () from /lib64/libc.so.6 #6 0x0000000000000000 in ?? () Thread 7 (Thread 0x7f94f7710700 (LWP 13632)): #0 0x00007f94ffc16d87 in ioctl () from /lib64/libc.so.6 #1 0x00007f95031c3479 in ?? () #2 0x00007f95031c35c1 in ?? () #3 0x00007f95031992d1 in ?? () #4 0x00007f9500b75a3f in start_thread () from /lib64/libpthread.so.0 #5 0x00007f94ffc1e71d in clone () from /lib64/libc.so.6 #6 0x0000000000000000 in ?? () Thread 6 (Thread 0x7f94f6f0f700 (LWP 13633)): #0 0x00007f94ffc16d87 in ioctl () from /lib64/libc.so.6 #1 0x00007f95031c3479 in ?? () #2 0x00007f95031c35c1 in ?? () #3 0x00007f95031992d1 in ?? () #4 0x00007f9500b75a3f in start_thread () from /lib64/libpthread.so.0 #5 0x00007f94ffc1e71d in clone () from /lib64/libc.so.6 #6 0x0000000000000000 in ?? () Thread 5 (Thread 0x7f9468e88700 (LWP 13634)): #0 0x00007f94ffc1ed53 in epoll_wait () from /lib64/libc.so.6 #1 0x00007f950035e65b in ?? () from /usr/lib64/libspice-server.so.1 #2 0x00007f9500b75a3f in start_thread () from /lib64/libpthread.so.0 #3 0x00007f94ffc1e71d in clone () from /lib64/libc.so.6 #4 0x0000000000000000 in ?? () Thread 4 (Thread 0x7f9467e86700 (LWP 11391)): #0 0x00007f9500b7a6f9 in pthread_cond_timedwait@@GLIBC_2.3.2 () from /lib64/libpthread.so.0 #1 0x00007f950311542f in ?? () #2 0x00007f9500b75a3f in start_thread () from /lib64/libpthread.so.0 #3 0x00007f94ffc1e71d in clone () from /lib64/libc.so.6 #4 0x0000000000000000 in ?? () Thread 3 (Thread 0x7f94fa2c4700 (LWP 11394)): #0 0x00007f9500b7a6f9 in pthread_cond_timedwait@@GLIBC_2.3.2 () from /lib64/libpthread.so.0 #1 0x00007f950311542f in ?? () #2 0x00007f9500b75a3f in start_thread () from /lib64/libpthread.so.0 #3 0x00007f94ffc1e71d in clone () from /lib64/libc.so.6 #4 0x0000000000000000 in ?? () Thread 2 (Thread 0x7f9467685700 (LWP 11395)): #0 0x00007f9500b7a6f9 in pthread_cond_timedwait@@GLIBC_2.3.2 () from /lib64/libpthread.so.0 #1 0x00007f950311542f in ?? () #2 0x00007f9500b75a3f in start_thread () from /lib64/libpthread.so.0 #3 0x00007f94ffc1e71d in clone () from /lib64/libc.so.6 #4 0x0000000000000000 in ?? () Thread 1 (Thread 0x7f9502f9c760 (LWP 13614)): #0 0x00007f9500b7d37d in read () from /lib64/libpthread.so.0 #1 0x00007f95003f24c0 in ?? () from /usr/lib64/libspice-server.so.1 #2 0x00007f9500340d38 in ?? () from /usr/lib64/libspice-server.so.1 #3 0x00007f9500342bcb in ?? () from /usr/lib64/libspice-server.so.1 #4 0x00007f950034391d in ?? () from /usr/lib64/libspice-server.so.1 #5 0x00007f9500360cef in ?? () from /usr/lib64/libspice-server.so.1 #6 0x00007f9500341421 in ?? () from /usr/lib64/libspice-server.so.1 #7 0x00007f95003426b8 in ?? () from /usr/lib64/libspice-server.so.1 #8 0x00007f950309d157 in ?? () #9 0x00007f950310768b in ?? () #10 0x00007f9503100407 in main () 2012-01-16 07:27:25.347+0000: shutting down -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 714995] New: open-iscsi script does not properly umount iscsi devices
by bugzilla_noreply＠novell.com 08 Aug '16

08 Aug '16

https://bugzilla.novell.com/show_bug.cgi?id=714995 https://bugzilla.novell.com/show_bug.cgi?id=714995#c0 Summary: open-iscsi script does not properly umount iscsi devices Classification: openSUSE Product: openSUSE 11.4 Version: Final Platform: x86-64 OS/Version: openSUSE 11.4 Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: thomas.saupe(a)novell.com QAContact: qa(a)suse.de Found By: Novell Technical Services Services Priority: 1000 Blocker: --- The code for umounting iscsi device in /etc/init.d/open-iscsi is broken, especially if the iscsi devices are used within multipathing. On system shutdown the umount of the mounted iscsi devices fails but the devices itself get logged out. This leads to a hang of the reboot, since the later the boot.localfs init script tries to umount the iscsi mounts that already have lost their devices. Attached a patch to the open-iscsi init script that corrects this. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 21

[Bug 731071] New: devel:languages:python/python-python-daemon: Bug
by bugzilla_noreply＠novell.com 28 Jul '16

28 Jul '16

https://bugzilla.novell.com/show_bug.cgi?id=731071 https://bugzilla.novell.com/show_bug.cgi?id=731071#c0 Summary: devel:languages:python/python-python-daemon: Bug Classification: openSUSE Product: openSUSE.org Version: unspecified Platform: Other OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: 3rd party software AssignedTo: jmatejek(a)suse.com ReportedBy: mweseloh(a)gmx.net QAContact: opensuse-communityscreening(a)forge.provo.novell.com CC: speilicke(a)suse.com Found By: --- Blocker: --- Upstream has retracted version 1.6 several weeks ago, as that version was badly broken. Please revert back to current upstram version 1.5.5 http://pypi.python.org/pypi/python-daemon -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 608457] New: screen corruption when scrolling with window in the foreground
by bugzilla_noreply＠novell.com 28 Jul '16

28 Jul '16

http://bugzilla.novell.com/show_bug.cgi?id=608457 http://bugzilla.novell.com/show_bug.cgi?id=608457#c0 Summary: screen corruption when scrolling with window in the foreground Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: x86-64 OS/Version: openSUSE 11.2 Status: NEW Severity: Normal Priority: P5 - None Component: Firefox AssignedTo: bnc-team-mozilla(a)forge.provo.novell.com ReportedBy: oneukum(a)novell.com QAContact: qa(a)suse.de Found By: --- Blocker: --- If another window is in front of firefox's window, text exposed by scrolling firefox's window is corrupted. This happens only with firefox and regardless of what kind of window is in front. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 748666] New: Please split opencv so that gstreamer can use it
by bugzilla_noreply＠novell.com 26 Jul '16

26 Jul '16

https://bugzilla.novell.com/show_bug.cgi?id=748666 https://bugzilla.novell.com/show_bug.cgi?id=748666#c0 Summary: Please split opencv so that gstreamer can use it Classification: openSUSE Product: openSUSE 12.2 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: KDE4 Workspace AssignedTo: kde-maintainers(a)suse.de ReportedBy: vuntz(a)suse.com QAContact: qa(a)suse.de Found By: --- Blocker: --- GStreamer now has a plugin for opencv. Unfortunately, enabling this means that this plugin brings as dependencies libqt4-x11 and libxine. It's a bit weird to have to drag a toolkit, and it's horrible to have a gstreamer plugin drag libxine. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 546843] New: gkeytool lack a support for ECC certificates
by bugzilla_noreply＠novell.com 22 Jul '16

22 Jul '16

http://bugzilla.novell.com/show_bug.cgi?id=546843 User mvyskocil(a)novell.com added comment http://bugzilla.novell.com/show_bug.cgi?id=546843#c546468 Summary: gkeytool lack a support for ECC certificates Classification: openSUSE Product: openSUSE 11.2 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: Basesystem AssignedTo: matz(a)novell.com ReportedBy: mvyskocil(a)novell.com QAContact: qa(a)suse.de Found By: Development gkeytool fails on read ECC certificate - this is also in openjdk, but the fix adds a support for Elliptic Curve Cryptography already exists in upstream, but I did not find similar for gcc java. I read a commit log, asked on #openjdk(a)irc.oftc.net, where many openjdk and gcj developers are, but noone answered me yet. see bnc#546468 for details about openjdk The java-1_5_0-gcj-compat fails on keystore creation: + for key in '/etc/ssl/certs/*.pem' + yes ++ basename /etc/ssl/certs/COMODO_ECC_Certification_Authority.pem + gkeytool-4.4 -import -keystore cacerts -file /etc/ssl/certs/COMODO_ECC_Certification_Authority.pem -storepass '' -alias COMODO_ECC_Certification_Authority.pem keytool error: java.security.cert.CertificateException error: Bad exit status from /var/tmp/rpm-tmp.cYvDZ9 (%prep) I'm going to workaround it in java-1_5_0-gcj-compat by skipping those certificates during keystore creation, to provide a fix immediately to make OpenOffice.org build immediately. But it'd be nice to have gcj with ECC support enabled. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 725800] New: devel:libraries:c_c /libbsd: Bug
by bugzilla_noreply＠novell.com 19 Jul '16

19 Jul '16

https://bugzilla.novell.com/show_bug.cgi?id=725800 https://bugzilla.novell.com/show_bug.cgi?id=725800#c0 Summary: devel:libraries:c_c /libbsd: Bug Classification: openSUSE Product: openSUSE.org Version: unspecified Platform: x86-64 OS/Version: openSUSE 11.4 Status: NEW Severity: Critical Priority: P5 - None Component: 3rd party software AssignedTo: mrueckert(a)suse.com ReportedBy: stefan.jakobs(a)rus.uni-stuttgart.de QAContact: opensuse-communityscreening(a)forge.provo.novell.com CC: crrodriguez(a)opensuse.org, pgajdos(a)suse.com Found By: --- Blocker: --- The x86_64 devel package of libbsd-devel is lacking the file /usr/include/bsd/libutil.h. The i586 package has that file. I got the following error while trying to build xxxterm: In file included from ../xxxterm.c:48:0: /usr/include/bsd/stdlib.h:46:25: fatal error: bsd/libutil.h: No such file or directory # rpm -ql -p ./libbsd-devel-0.3.0-1.1.i586.rpm | grep libutil.h /usr/include/bsd/libutil.h /usr/include/libutil.h # rpm -ql -p ./libbsd-devel-0.3.0-1.1.x86_64.rpm | grep libutil.h /usr/include/libutil.h -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 718113] New: MySpell descriptions refer to OpenOffice.org instead of LibreOffice
by bugzilla_noreply＠novell.com 14 Jul '16

14 Jul '16

https://bugzilla.novell.com/show_bug.cgi?id=718113 https://bugzilla.novell.com/show_bug.cgi?id=718113#c0 Summary: MySpell descriptions refer to OpenOffice.org instead of LibreOffice Classification: openSUSE Product: openSUSE 12.1 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Minor Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: andrea.turrini(a)gmail.com QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:7.0) Gecko/20100101 Firefox/7.0 The current description of the packages related to MySpell refers to OpenOffice.org instead of LibreOffice, the office suite proposed by openSUSE. For instance, "The MySpell spell-checker is used by the OpenOffice.org office suite..." belongs to the description of each package myspell-<language> Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 14

[Bug 752842] New: privacy extensions IPv6 are enabled since 12.1 and on
by bugzilla_noreply＠novell.com 07 Jul '16

07 Jul '16

https://bugzilla.novell.com/show_bug.cgi?id=752842 https://bugzilla.novell.com/show_bug.cgi?id=752842#c0 Summary: privacy extensions IPv6 are enabled since 12.1 and on Classification: openSUSE Product: openSUSE 12.1 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: roeland(a)linux-it.nl QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux i686; rv:10.0.2) Gecko/20100101 Firefox/10.0.2 at least since 12.1 and 12.2M2, the IPv6 privacy extensions are enabled leading to a daily changing IPv6 address. Now, I have *selected* static IP addresses, which obviously is incompatible with privacy extensions. Reproducible: Always Steps to Reproduce: 1. 2. 3. Expected Results: I would expect it to be off. If people want to have it on, then have them select it. Administratively it's a pain if the extensions are on. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 25