November 2011 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 658547] New: Incoherent rpmlint warning
by bugzilla_noreply＠novell.com 27 Sep '13

27 Sep '13

https://bugzilla.novell.com/show_bug.cgi?id=658547 https://bugzilla.novell.com/show_bug.cgi?id=658547#c0 Summary: Incoherent rpmlint warning Classification: openSUSE Product: openSUSE.org Version: unspecified Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: BuildService AssignedTo: dmueller(a)novell.com ReportedBy: davejplater(a)gmail.com QAContact: adrian(a)novell.com Found By: --- Blocker: --- ktorrent had a "Requires: oxygen-icon-theme" which brought up an rpmlint warning about non versioned branding package so I added : "Requires: oxygen-icon-theme = %{_kde_platform_version}" which didn't make the warning go away so I changed it to : "Requires: oxygen-icon-theme-%{_kde_platform_version}" which brought up the warning : ktorrent.x86_64: W: suse-branding-specific-branding-req oxygen-icon-theme-4.5.85 bla The "Requires: oxygen-icon-theme-%{_kde_platform_version}" is obviously not the right thing to do either because there isn't a package listed to provide it although oxygen-icon-theme-4.5.85 is present in KDF. See home:plater:kde4 ktorrent. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1

[Bug 571853] New: check for duplicate Patch232: lines in spec file
by bugzilla_noreply＠novell.com 27 Sep '13

27 Sep '13

http://bugzilla.novell.com/show_bug.cgi?id=571853 http://bugzilla.novell.com/show_bug.cgi?id=571853#c0 Summary: check for duplicate Patch232: lines in spec file Classification: openSUSE Product: openSUSE 11.3 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Development AssignedTo: dmueller(a)novell.com ReportedBy: dmueller(a)novell.com QAContact: qa(a)suse.de CC: ro(a)novell.com Found By: --- Blocker: --- numbers in patchxxx or sourcexxx must not be reused -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 635002] New: invalid-lc-messages-dir: Wrongly detected "ast" directory
by bugzilla_noreply＠novell.com 27 Sep '13

27 Sep '13

https://bugzilla.novell.com/show_bug.cgi?id=635002 https://bugzilla.novell.com/show_bug.cgi?id=635002#c0 Summary: invalid-lc-messages-dir: Wrongly detected "ast" directory Classification: openSUSE Product: openSUSE.org Version: unspecified Platform: Other OS/Version: Other Status: NEW Severity: Minor Priority: P5 - None Component: BuildService AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: thomas.schraitle(a)novell.com QAContact: adrian(a)novell.com Found By: Documentation Blocker: --- When building Calibre in my repository (home:thomas-schraitle:calibre), rpmlint displays the following warning report: calibre.x86_64: W: invalid-lc-messages-dir /usr/share/locale/ast/LC_MESSAGES/calibre.mo calibre.x86_64: W: invalid-lc-messages-dir /usr/share/locale/ast/LC_MESSAGES/iso639.mo I think, this report is wrong as "ast" is the correct language code for the Asturian language, see http://en.wikipedia.org/wiki/Asturian_language -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 668613] New: ifroute fails if it was started from ifup <int>
by bugzilla_noreply＠novell.com 26 Sep '13

26 Sep '13

https://bugzilla.novell.com/show_bug.cgi?id=668613 https://bugzilla.novell.com/show_bug.cgi?id=668613#c0 Summary: ifroute fails if it was started from ifup <int> Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: x86 OS/Version: openSUSE 11.3 Status: NEW Severity: Normal Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: kviset(a)mail.ru QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; ru; rv:1.9.2.13) Gecko/20101203 SUSE/3.6.13-0.2.1 Firefox/3.6.13 I'm trying to auto add route for pptp connections. But using ifroute-dsl0 fails. Reproducible: Always Steps to Reproduce: 1. Create symbolik link: ln -s /etc/sysconfig/network/scripts/ifup-route /etc/sysconfig/network/if-up.d/ifup-route 2. Create /etc/sysconfig/network/ifroute-dsl0 with: 192.168.52.0 0.0.0.0 255.255.255.0 dsl0 3. Execute ifup dsl0 -o debug Actual Results: # ifup dsl0 -o debug dsl0 name: DSL Enter the password for the internet provider. Password: interface dsl0 is up executing additional global start script if-up.d/21-cifs executing additional global start script if-up.d/21-dhcpcd-hook-samba executing additional global start script if-up.d/ifup-route interface dsl0 is not up executing additional global start script if-up.d/ndp-proxy executing additional global start script if-up.d/SuSEfirewall2 Content of ifcfg-dsl0: BOOTPROTO='none' DEVICE='eth0' MODEM_IP='89.105.151.55' NAME='DSL ' PPPD_OPTIONS='' PPPMODE='pptp' PROVIDER='provider0' STARTMODE='manual' UDI='' USERCONTROL='yes' VPIVCI='' If I trying execute ifroute dsl0 after ifup dsl0, all run properly. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 17

[Bug 637170] New: build fails upon encountering a plaindir repo
by bugzilla_noreply＠novell.com 26 Sep '13

26 Sep '13

https://bugzilla.novell.com/show_bug.cgi?id=637170 https://bugzilla.novell.com/show_bug.cgi?id=637170#c0 Summary: build fails upon encountering a plaindir repo Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: x86-64 OS/Version: openSUSE 11.2 Status: NEW Severity: Minor Priority: P5 - None Component: Development AssignedTo: pth(a)novell.com ReportedBy: giecrilj(a)stegny.2a.pl QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; pl-PL; rv:1.9.1.11) Gecko/20100714 SUSE/3.5.11-0.1.1 Ant.com Toolbar 2.0.1 Firefox/3.5.11 Build is unable to run when a plain directory repository is configured. Reproducible: Always Steps to Reproduce: 1. Use Yast to configure a plain directory repository. Linuxant URL: dir:///tmp/kde-krzysztof/ark0egoK0/hsfmodem-7.80.02.05x86_64full-1.x86_64.rpm Kategoria: Plaindir 2. zypper source-install kdegraphics4 3. sudo build /usr/src/packages/SPECS/kdegraphics4.spec Actual Results: 3. /usr/lib/build/createrepomddeps zypp://Linuxant unsupported repo type: plaindir Expected Results: 3. That repository should simply be ignored. Workaround: disable the offending repository. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 547612] New: mkinitrd: root on LVM on LUKS on RAID doesn't work
by bugzilla_noreply＠novell.com 26 Sep '13

26 Sep '13

http://bugzilla.novell.com/show_bug.cgi?id=547612 Summary: mkinitrd: root on LVM on LUKS on RAID doesn't work Classification: openSUSE Product: openSUSE 11.2 Version: RC 1 Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: mvancura(a)novell.com ReportedBy: lnussel(a)novell.com QAContact: qa(a)suse.de Found By: --- The following layering of devices is not properly handled by mkinitrd scripts. Error in the end is "Device /dev/md0 not handled". / [ filesystem ] /dev/mapper/system-root [ LVM ] /dev/mapper/cr_md0 [ LUKS ] /dev/md0 [ MD RAID ] /dev/sda2, /dev/sdb1, .. [ physical devices ] The way mkinitrd script are set up atm luks can only directly follow lvm. Therefore setup-luks plays a trick to support LVM in LUKS (fate 305633) which in the end leads to the error message above. IMHO the easiest workaround at this point would be to just not make that condition fatal in setup-block.sh. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 6

[Bug 513994] New: new udev will need /sbin/blkid in initramfs
by bugzilla_noreply＠novell.com 26 Sep '13

26 Sep '13

http://bugzilla.novell.com/show_bug.cgi?id=513994 Summary: new udev will need /sbin/blkid in initramfs Classification: openSUSE Product: openSUSE 11.2 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: mvancura(a)novell.com ReportedBy: kasievers(a)novell.com QAContact: qa(a)suse.de CC: hare(a)novell.com Found By: --- Created an attachment (id=298700) --> (http://bugzilla.novell.com/attachment.cgi?id=298700) mkinitrd blkid patch We need this available in Factory before we can update udev. Please add that and push it out. Thanks! -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 646549] New: Waiting merge requests for and descriptions in rpmlint-checks
by bugzilla_noreply＠novell.com 25 Sep '13

25 Sep '13

https://bugzilla.novell.com/show_bug.cgi?id=646549 https://bugzilla.novell.com/show_bug.cgi?id=646549#c0 Summary: Waiting merge requests for and descriptions in rpmlint-checks Classification: openSUSE Product: openSUSE.org Version: unspecified Platform: All OS/Version: All Status: NEW Severity: Enhancement Priority: P5 - None Component: BuildService AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: johannesobermayr(a)gmx.de QAContact: adrian(a)novell.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; de; rv:1.9.2.10) Gecko/20100914 SUSE/3.6.10-0.3.1 Firefox/3.6.10 There are two waiting merge requests for rpmlint-checks: http://gitorious.com/opensuse/rpmlint-checks/merge_requests/ It seems that merge request have been disabled for a few days. openSUSE is a community project, isn`t it? The RPMLINT checks should contain information how one can fix the specific warning(s) [see merge request 1]. Here is an example for a really bad description. Nobody on #opensuse-kde or #opensuse-buildservice knows how to solve it (kdegames4 in K:U:SC or K:D:F): kajongg.x86_64: W: python-bytecode-inconsistent-mtime /usr/share/kde4/apps/kajongg/genericdelegates.pyc 2010-10-12T22:25:08 /usr/share/kde4/apps/kajongg/genericdelegates.py 2010-09-12T19:29:31 The timestamp embedded in this python bytecode file isn't equal to the mtime of the original source file, which will force the interpreter to recompile the py source every time, ignoring the saved bytecode. I tried it with "touch --reference=$file $file[c]" already without any success .. Reproducible: Always -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 7

[Bug 727790] New: rpmlint should warn about using shellscript in %pretrans phase
by bugzilla_noreply＠novell.com 25 Sep '13

25 Sep '13

https://bugzilla.novell.com/show_bug.cgi?id=727790 https://bugzilla.novell.com/show_bug.cgi?id=727790#c0 Summary: rpmlint should warn about using shellscript in %pretrans phase Classification: openSUSE Product: openSUSE 12.1 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Enhancement Priority: P5 - None Component: Basesystem AssignedTo: lnussel(a)suse.com ReportedBy: prusnak(a)suse.com QAContact: qa(a)suse.de CC: dmueller(a)suse.com Found By: --- Blocker: --- rpmlint should warn (or maybe error?) about using shellscript in %pretrans phase. The reason is that when the package and bash are installed in the same transaction the %pretrans script of the package fails. This is the problem that was hit recently by Studio guys while installing mysql package. I also talked with Panu (upstream rpm maintainer) and he claims there is no way to express something like "Requires(pretrans): bash" and even if there was it does not make much sense. Thus I think we should introduce this warning/error and provide a link to documentation how to rewrite bash pretrans script into a lua one. (probably inspired by http://www.rpm.org/wiki/PackagerDocs/RpmLua#AvailableLuaextensionsinRPM) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 688348] New: Xfce: Enhancing Help
by bugzilla_noreply＠novell.com 25 Sep '13

25 Sep '13

https://bugzilla.novell.com/show_bug.cgi?id=688348 https://bugzilla.novell.com/show_bug.cgi?id=688348#c0 Summary: Xfce: Enhancing Help Classification: openSUSE Product: openSUSE 12.1 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Enhancement Priority: P5 - None Component: Xfce AssignedTo: bnc-team-xfce(a)forge.provo.novell.com ReportedBy: ke(a)novell.com QAContact: qa(a)suse.de Depends on: 688095 Found By: Documentation Blocker: --- +++ This bug was initially created as a clone of Bug #688095 +++ I'm wondering whether it would be possibile to provide general help on openSUSE via the Main-menu ("OpenSUSE)" -> "Help" button? It would be great, if you could integrate or reference /usr/share/doc/manual/opensuse-manuals_en/manual/index.html somehow. ============================================================================= The index file is part of the opensuse-manuals_en package, which also comes with /usr/share/help/opensuse-manuals_en.document used by the GNOME help system. The PDF sub-packages such as opensuse-startup_en-pdf also contain document files, e.g., /usr/share/help/opensuse-startup_en-pdf.document. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 10