June 2010 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 594812] New: udev-configure-printer uses "usb/..." device URI for HP printers
by bugzilla_noreply＠novell.com 18 Jun '10

18 Jun '10

http://bugzilla.novell.com/show_bug.cgi?id=594812 http://bugzilla.novell.com/show_bug.cgi?id=594812#c0 Summary: udev-configure-printer uses "usb/..." device URI for HP printers Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: All OS/Version: openSUSE 11.2 Status: NEW Severity: Normal Priority: P5 - None Component: Printing AssignedTo: vuntz(a)novell.com ReportedBy: jsmeix(a)novell.com QAContact: jsmeix(a)novell.com Found By: Development Blocker: --- Created an attachment (id=353181) --> (http://bugzilla.novell.com/attachment.cgi?id=353181) What there is in /var/log/messages while udev-configure-printer set up the queue I plugged in my HP LaserJet 1220 printer/scanner to the USB and udev-configure-printer set up a print queue where both the CUPS device URI and the PPD file (i.e. the driver) are "problematic": The device URI is "usb:/..." but the generic CUPS "usb" backend does not provide the functionality which is needed so that the scanner unit can be used. HPLIP's "hp" backend is required for HP all-in-one devices. Even for plain HP printers the "hp" backend should be used because it provides the functionality which is needed so that HPLIP's "hp-toolbox" can show the device status. Both backends detect the device: -------------------------------------------------------------- # /usr/lib/cups/backend/usb direct usb://HP/LaserJet%201220 "HP LaserJet 1220" "HP LaserJet 1220" "MFG:Hewlett-Packard;CMD:PJL,MLC,PCL,PCLXL,POSTSCRIPT;MDL:HP LaserJet 1220;CLS:PRINTER;DES:Hewlett-Packard LaserJet 1220;MEM:8MB" "" # /usr/lib/cups/backend/hp direct hp:/usb/HP_LaserJet_1220?serial=00XXXXXXXXXX "HP LaserJet 1220" "HP LaserJet 1220 USB 00XXXXXXXXXX HPLIP" "MFG:HewLett Packard;MDL:HP LaserJet 1220;CLS:PRINTER;DES:HP LaserJet 1220;SN:00XXXXXXXXXX;" -------------------------------------------------------------- so that I don't see a reason why not the "hp:/..." device URI is used by udev-configure-printer. Furthermore, when I set up a second print queue using YaST or hp-setup with the "hp:/..." device URI the udev-configure-printer queue does no longer work because of what is described in bug #184825 The PPD file is "HP/LaserJet_1220-lj4dith.ppd.gz" which runs the Ghostscript driver "lj4dith" which provides only basic printout quality compared to PostScript (the HP LaserJet 1220 is a native PostScript printer). -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 7

[Bug 612004] New: oocalc crashes when opening the attached html file
by bugzilla_noreply＠novell.com 18 Jun '10

18 Jun '10

http://bugzilla.novell.com/show_bug.cgi?id=612004 http://bugzilla.novell.com/show_bug.cgi?id=612004#c0 Summary: oocalc crashes when opening the attached html file Classification: openSUSE Product: openSUSE 11.3 Version: Factory Platform: x86-64 OS/Version: openSUSE 11.3 Status: NEW Severity: Normal Priority: P5 - None Component: OpenOffice.org AssignedTo: bnc-team-ooo(a)forge.provo.novell.com ReportedBy: thiago.sayao(a)gmail.com QAContact: cwei(a)novell.com Found By: --- Blocker: --- Created an attachment (id=367325) --> (http://bugzilla.novell.com/attachment.cgi?id=367325) open this file to make oocalc crash User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.4) Gecko/20100513 SUSE/3.6.4-1.11 Firefox/3.6.4 oocalc crashes when opening the attached html file. I often use this html file with oocalc, but it's crashing when trying to open it on opensuse 11.3 milestone 7. The file is a html that contains a table with past lottery results which i use to get statistics. Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 7

[Bug 609844] New: autopacks
by bugzilla_noreply＠novell.com 18 Jun '10

18 Jun '10

http://bugzilla.novell.com/show_bug.cgi?id=609844 http://bugzilla.novell.com/show_bug.cgi?id=609844#c0 Summary: autopacks Classification: openSUSE Product: openSUSE 11.3 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Enhancement Priority: P5 - None Component: Basesystem AssignedTo: ro(a)novell.com ReportedBy: coolo(a)novell.com QAContact: qa(a)suse.de Found By: --- Blocker: --- please change the auto packs to create a submit request instead of commiting right away. The timing is very often pretty bad. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1

[Bug 610068] New: Debug packages don't get build
by bugzilla_noreply＠novell.com 18 Jun '10

18 Jun '10

http://bugzilla.novell.com/show_bug.cgi?id=610068 http://bugzilla.novell.com/show_bug.cgi?id=610068#c0 Summary: Debug packages don't get build Classification: openSUSE Product: openSUSE.org Version: unspecified Platform: Other OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: BuildService AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: bitdealer(a)gmail.com QAContact: adrian(a)novell.com Found By: --- Blocker: --- Building of debug packages is enabled in X11:Utilities (e.g. they get build for "synergy") and is not explicitly disabled for "synergy-plus". Nevertheless no debug packages for synergy-plus get created but it is bitching about unstripped binaries. Also doing "osc build -b" locally builds them just fine. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 608899] New: X11 display looks like garbage, no mouse & no keyboard seems to work after resume from suspend to disk
by bugzilla_noreply＠novell.com 18 Jun '10

18 Jun '10

http://bugzilla.novell.com/show_bug.cgi?id=608899 http://bugzilla.novell.com/show_bug.cgi?id=608899#c0 Summary: X11 display looks like garbage, no mouse & no keyboard seems to work after resume from suspend to disk Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: i686 OS/Version: openSUSE 11.2 Status: NEW Severity: Major Priority: P5 - None Component: X.Org AssignedTo: bnc-team-xorg-bugs(a)forge.provo.novell.com ReportedBy: Ulrich.Windl(a)rz.uni-regensburg.de QAContact: xorg-maintainer-bugs(a)forge.provo.novell.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.1.9) Gecko/20100317 SUSE/2.0.4-1.1.1 SeaMonkey/2.0.4 On a Dell "OptiPlex GX240" with an ATI "Rage 128 Ultra TF" suspend to disk seems to work fine, but when resuming from that suspend, the X display looks like garbage initially. Occasionally after some time a clean mouse cursor appears, but that cursor does not move when moving the USB mouse, not does the USB keyboard seem to work. Interestingly, even the ACPI power switch seems inactive then. When unplugging/repluigging the USB, I can switch to a text console occasionally. Then, when I restart GDM, I can work, but interestingly the X server moved from vt07 to vt08 then. Reproducible: Always Steps to Reproduce: 1. See description above Actual Results: Without special actions the computer is unusable, nor can it be shut down cleanly. Expected Results: Resume should work in a way that makes the computer usable. Interesting syslog messages are: (during suspend (S4)) ACPI handle has no context! (during resume) ohci_hcd 0000:03:09.0: PME# disabled pm_op(): pci_pm_restore+0x0/0xa0 returns -16 PM: Device 0000:00:00.0 failed to restore: error -16 pci 0000:01:00.0: PME# disabled Xorg:1360 freeing invalid memtype f4102000-f4106000 Xorg:1360 freeing invalid memtype f4106000-f410a000 mtrr: no MTRR for f8000000,1000000 found agpgart-intel 0000:00:00.0: AGP 2.0 bridge agpgart-intel 0000:00:00.0: putting AGP V2 device into 1x mode -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 613907] New: [rpmlint] libproxy1.x86_64: W: shlib-policy-nonversioned-dir /usr/lib64/libproxy
by bugzilla_noreply＠novell.com 18 Jun '10

18 Jun '10

http://bugzilla.novell.com/show_bug.cgi?id=613907 http://bugzilla.novell.com/show_bug.cgi?id=613907#c0 Summary: [rpmlint] libproxy1.x86_64: W: shlib-policy-nonversioned-dir /usr/lib64/libproxy Classification: openSUSE Product: openSUSE 11.3 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: dominique.leuenberger(a)tmf-group.com QAContact: qa(a)suse.de Found By: --- Blocker: --- For a long time, the warning is in the package and does not really make sense: libproxy1.x86_64: W: shlib-policy-nonversioned-dir /usr/lib64/libproxy libproxy1.x86_64: W: shlib-policy-nonversioned-dir /usr/lib/libproxy Your shared library package contains non-versioned directories. Those will not allow to install multiple versions of the package in parallel. I know it's a warning and can potentially be ignored, but I don't think that's a point for a warning. Libproxy for example creates a subfolder with it's version below those mentioned folders, in order to ensure they can be installed in parallel. (%{_libdir}/libproxy/0.4.3) As such I suggest to rework the warning to be spewed out only in case there are actually files in the folder at question (directories do not conflict on installation; it can be owned by more than one package; only files can't) -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 611766] New: at-spi2 should set GTK_PATH64 rather than GTK_PATH
by bugzilla_noreply＠novell.com 18 Jun '10

18 Jun '10

http://bugzilla.novell.com/show_bug.cgi?id=611766 http://bugzilla.novell.com/show_bug.cgi?id=611766#c0 Summary: at-spi2 should set GTK_PATH64 rather than GTK_PATH Classification: openSUSE Product: openSUSE 11.3 Version: Factory Platform: 64bit OS/Version: Linux Status: NEW Severity: Normal Priority: P5 - None Component: GNOME AssignedTo: bnc-team-gnome(a)forge.provo.novell.com ReportedBy: mgorse(a)novell.com QAContact: qa(a)suse.de Found By: --- Blocker: --- Created an attachment (id=367199) --> (http://bugzilla.novell.com/attachment.cgi?id=367199) Patch. at-spi2-atk, if relocated, installs a desktop file that sets GTK_PATH to point to the relocated atk-bridge, but gtk in OpenSUSE uses GTK_PATH64 instead on 64-bit architectures. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1

[Bug 596538] New: problem using afs with kerberos5
by bugzilla_noreply＠novell.com 18 Jun '10

18 Jun '10

http://bugzilla.novell.com/show_bug.cgi?id=596538 http://bugzilla.novell.com/show_bug.cgi?id=596538#c0 Summary: problem using afs with kerberos5 Classification: openSUSE Product: openSUSE 11.3 Version: Factory Platform: x86-64 OS/Version: SLED 11 Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: novell(a)mifritscher.de QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.1.7) Gecko/20091222 SUSE/3.5.7-1.1.1 Firefox/3.5.7 Using current versions, afs fails to get a ticket. A strace aklog -d gives: write(1, "Setting tokens. AFS ID 1950 / @"..., 62Setting tokens. AFS ID 1950 / @ TEST.DE ) = 62 write(2, "", 0) = 0 open("/proc/fs/openafs/afs_ioctl", O_RDWR) = 5 ioctl(5, CAPI_REGISTER or SNDCTL_COPR_LOAD, 0x7fff403666b0) = -1 EIO (Input/output error) close(5) = 0 write(2, "aklog: unable to obtain tokens f"..., 88aklog: unable to obtain tokens for cell test.de (status: 11862791). ) = 88 getuid() = 1950 socket(PF_FILE, 0x80801 /* SOCK_??? */, 0) = 5 uname -a: Linux wmax065 2.6.27.45-0.1-default #1 SMP 2010-02-22 16:49:47 +0100 x86_64 x86_64 x86_64 GNU/Linux krb: Version: 1.6.3-133.26.1 openafs: Version: 1.4.12-6.1 Reproducible: Always Steps to Reproduce: 1.install afs + kerberos 2.login 3.aklog -d Actual Results: aklog: unable to obtain tokens for cell mathematik.uni-wuerzburg.de (status: 11862791). Expected Results: should work -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 613065] New: lvm shell crashes on white space only line
by bugzilla_noreply＠novell.com 18 Jun '10

18 Jun '10

http://bugzilla.novell.com/show_bug.cgi?id=613065 http://bugzilla.novell.com/show_bug.cgi?id=613065#c0 Summary: lvm shell crashes on white space only line Classification: openSUSE Product: openSUSE 11.3 Version: Factory Platform: x86-64 OS/Version: openSUSE 11.3 Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: xwhu(a)novell.com ReportedBy: lchiquitto(a)novell.com QAContact: qa(a)suse.de Found By: --- Blocker: --- How to reproduce: # lvm lvm> <== white spaces Segmentation fault (core dumped) -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 5

[Bug 615398] New: MPTFUSION [LSI FEAT] for SLES10 SP4: Upgrade driver version to 03.04.16_suse
by bugzilla_noreply＠novell.com 18 Jun '10

18 Jun '10

http://bugzilla.novell.com/show_bug.cgi?id=615398 http://bugzilla.novell.com/show_bug.cgi?id=615398#c0 Summary: MPTFUSION [LSI FEAT] for SLES10 SP4: Upgrade driver version to 03.04.16_suse Classification: openSUSE Product: openSUSE 11.1 Version: Final Platform: All OS/Version: SuSE Linux 10.1 Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: kashyap.desai(a)lsi.com QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 Reference : https://bugzilla.novell.com/show_bug.cgi?id=494693#c4 SLES10SP3 driver is 3.4.07_suse. Current upstream driver as of today is 3.4.15. I have proposed few patches for 3.4.16 driver update to upstream which are in pipeline. Please add below patches to SLES10 SP4 in sequence. ------------------------ [PATCH 3/7] mptsas : Handle INSUFFICIENT resources status as similar to IOC BUSY status. [PATCH 4/7] mptsas : Change config request timeout value to 30 seconds. [PATCH 6/7] mptsas : Code cleanup of host page alloc and diag reset. ------------------------ [PATCH 1/6] mptsas : Sanity check for phyinfo is added. [PATCH 2/6] mptsas : NULL pointer on big endian systems causing Expander not to tear off [PATCH 3/6] mptsas : PAE Kernel more than 4 GB kernel panic. [This patch is already part of SLES10SP3 driver, no need to patch this one] [PATCH 4/6] mptsas : Send DID_NO_CONNECT for pending IOs of removed dev [PATCH 5/6] mptsas : FW event thread and scsi mid layer deadlock in SYNCHRONIZE CACHE command [PATCH 6/6] mptsas : Bump version to 3.04.12 ------------------------ [PATCH 0/2] mptsas : Removed print form mptctl. [This is already part of SLES10 SP3 based mptfusion driver] [PATCH 1/2] mptsas : Errata 1030 for parallel scsi [PATCH 2/2] mptsas : Bump version to 3.04.13 ------------------------ [PATCH 1/5] mptfusion: Added MPI_SCSIIO_CONTROL_HEADOFQ priority [PATCH 2/5] mptfusion: Added sysfs expander manufacture information at the time of expander add. [PATCH 3/5] mptfusion: block device when target is being removed by FW. [PATCH 4/5] mptfusion: corrected if condition check for SCSIIO and PASSTHROUGH commands [PATCH 5/5] mptfusion: Bump version 03.04.14 ------------------------ [PATCH 01/12] mptfusion: Added new less expensive RESET (Message Unit Reset) [PATCH 02/12] mptfusion: Updated SCSI IO IOCTL error handling. [PATCH 03/12] mptfusion: mpt config will do Hard Reset based upon retry counts [PATCH 04/12] mptfusion: mpt_detach is called properly at the time of remove. [PATCH 05/12] mptfusion: Proper bus_type check is added. [PATCH 06/12] mptfusion: Setting period,offset and width for SPI driver [PATCH 07/12] mptfusion: sanity check vdevice check is added [PATCH 08/12] mptfusion: Task abort is not supported for Volumes [PATCH 09/12] mptfusion: Check for command status is added after completion. [PATCH 10/12] mptfusion: Event data alignment with 4 byte. [PATCH 11/12] mptfusion: Proper error handling is added after mpt_config timeout. [PATCH 12/12] mptfusion: Bump version 03.04.15 ------------------------ [PATCH 01/08] mptfusion: Set fw_events_off to 1 at driver load time. [PATCH 02/08] mptfusion: Use DID_TRANSPORT_DISRUPTED instead of DID_BUS_BUSY. [PATCH 03/08] mptfusion: Corrected declaration of device_missing_delay [PATCH 04/08] mptfusion: Added sanity to check B_T mapping for device before adding to OS [PATCH 05/08] mptfusion: schedule_target_reset from all Reset context [PATCH 06/08] mptfusion: Added code for occationally SATA hotplug failure. [PATCH 07/08] mptfusion: Added missing reset for ioc_reset_in_progress in SoftReset [PATCH 08/08] mptfusion: Bump version 03.04.16 ------------------------ Thanks, Kashyap Reproducible: Sometimes Steps to Reproduce: N/A Actual Results: N/A Expected Results: N/A Driver must be upgraded to 3.04.16_suse after this patch is applied. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1