March 2010 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 589541] New: nfs client not working
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=589541 http://bugzilla.novell.com/show_bug.cgi?id=589541#c0 Summary: nfs client not working Classification: openSUSE Product: openSUSE 11.3 Version: Milestone 3 Platform: x86-64 OS/Version: openSUSE 11.3 Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: till.eberlein(a)kabelbw.de QAContact: jsrain(a)novell.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; de; rv:1.9.2.0) Gecko/20100115 SUSE/3.6.0-1.8 Firefox/3.6 the nfs client in version 2.19.1-1.1 is not working. when pressing the "ok" button nothing happens, only the "abbrechen" button is working, but then no shares are saved. this happens with yast in gnome and text-based yast. the older available client version 2.18.0-2.2 is working properly. Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 12

[Bug 589433] New: Install grub into root (/) partition gives error
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=589433 http://bugzilla.novell.com/show_bug.cgi?id=589433#c0 Summary: Install grub into root (/) partition gives error Classification: openSUSE Product: openSUSE 11.3 Version: Milestone 3 Platform: x86 OS/Version: openSUSE 11.3 Status: NEW Severity: Critical Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: fisiu82(a)gmail.com QAContact: jsrain(a)novell.com Found By: --- Blocker: --- Created an attachment (id=349250) --> (http://bugzilla.novell.com/attachment.cgi?id=349250) YaST2 screen from installation of grub User-Agent: Mozilla/5.0 (X11; U; Linux i686; pl-PL; rv:1.9.2.0) Gecko/20100115 SUSE/3.6.0-1.8 Firefox/3.6 During install 11.3 M3 from KDE LiveCD on spare partition, installation of grub gave me an error. By default setup wanted to install grub into mbr (finally it works!) but I have fully working system on first partition with grub in mbr. So I decided to install grub into a root of new system (M3). Then I got this error. Reproducible: Didn't try Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 10

[Bug 589431] New: preload kmp has broken supplements
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=589431 http://bugzilla.novell.com/show_bug.cgi?id=589431#c0 Summary: preload kmp has broken supplements Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: coolo(a)novell.com ReportedBy: mls(a)novell.com QAContact: qa(a)suse.de Found By: Development Blocker: --- $ rpm -q --supplements preload-kmp-desktop kernel-desktop packageand(kernel-desktop:preload) packageand(kernel-desktop:preload) Please remove "kernel-desktop". And one of "packageand(kernel-desktop:preload)" is enough. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 589293] New: DMZ Cursor theme needs to be removed from desktop-data-openSUSE
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=589293 http://bugzilla.novell.com/show_bug.cgi?id=589293#c0 Summary: DMZ Cursor theme needs to be removed from desktop-data-openSUSE Classification: openSUSE Product: openSUSE 11.3 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: awafaa(a)opensuse.org QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-GB; rv:1.9.1.8) Gecko/20100204 SUSE/3.5.8-0.1.1 Firefox/3.5.8 Currently desktop-data-openSUSE contains the DMZ Cursor theme. As part of the Moblin submissions to Factory I submitted icon-them-dmz-cursors. There was talk about splitting it out in the past, but no real push. Any chance this can be done now? Reproducible: Always -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 8

[Bug 589021] New: Better protect java stack
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=589021 http://bugzilla.novell.com/show_bug.cgi?id=589021#c0 Summary: Better protect java stack Classification: openSUSE Product: openSUSE 11.3 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Java AssignedTo: bnc-team-java(a)forge.provo.novell.com ReportedBy: pmladek(a)novell.com QAContact: qa(a)suse.de CC: mmeeks(a)novell.com Found By: Development Blocker: --- Could you please backport the fix from http://cr.openjdk.java.net/~aph/6929067-jdk7-webrev-4/ into our openJDK package? It should better protect the java stack and help with debugging problems, for example the bug #578802. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 588998] New: yast2-schema: no element "printer" in profile.rng
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=588998 http://bugzilla.novell.com/show_bug.cgi?id=588998#c0 Summary: yast2-schema: no element "printer" in profile.rng Classification: openSUSE Product: openSUSE 11.3 Version: Factory Platform: All OS/Version: openSUSE 11.3 Status: NEW Severity: Normal Priority: P5 - None Component: AutoYaST AssignedTo: ug(a)novell.com ReportedBy: jsmeix(a)novell.com QAContact: qa(a)suse.de CC: mzugec(a)novell.com Found By: Development Blocker: --- I run as root "yast2 --gtk autoyast" and therein I do -> tools -> create reference profile (check only printer) -> create and then -> tools -> check validity of profile I get an error poput with the folowing xmllint error (I added only here \ to wrap the too long lines) -------------------------------------------------------------- /usr/bin/xmllint --noout --relaxng \ /usr/share/YaST2/schema/autoyast/rng/profile.rng \ /tmp/YaST2-15945-JC4X8S/printer.xml /tmp/YaST2-15945-JC4X8S/printer.xml:4: element printer: \ Relax-NG validity error : \ Element profile has extra content: printer /tmp/YaST2-15945-JC4X8S/printer.xml fails to validate -------------------------------------------------------------- I think xmllint is right because there is no element printer in /usr/share/YaST2/schema/autoyast/rng/profile.rng Adding -------------------------------------------------------- <optional> <ref name="printer"/> </optional> -------------------------------------------------------- to /usr/share/YaST2/schema/autoyast/rng/profile.rng does not help and I get another xmllint error: ------------------------------------------------------------------- /usr/bin/xmllint --noout --relaxng \ /usr/share/YaST2/schema/autoyast/rng/profile.rng \ /tmp/YaST2-15945-JC4X8S/printer.xml /usr/share/YaST2/schema/autoyast/rng/profile.rng:80: \ element ref: Relax-NG parser error : \ Reference printer has no matching definition Relax-NG schema /usr/share/YaST2/schema/autoyast/rng/profile.rng \ failed to compile ------------------------------------------------------------------- When this issue is fixed for openSUSE 11.3 please have in mind that the AutoYaST printer client in yast2-printer will change a lot for openSUSE 11.3, see bug #588679. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 588770] New: Installer complains that the "custom bootloader isn't available anymore".
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=588770 http://bugzilla.novell.com/show_bug.cgi?id=588770#c0 Summary: Installer complains that the "custom bootloader isn't available anymore". Classification: openSUSE Product: openSUSE 11.3 Version: Milestone 3 Platform: x86 OS/Version: openSUSE 11.3 Status: NEW Severity: Normal Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: chobbs(a)siloamsprings.com QAContact: jsrain(a)novell.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US) AppleWebKit/532.9 (KHTML, like Gecko) Chrome/5.0.307.7 Safari/532.9 I'm installing Milestone 3 under VirtualBox. When the installer makes it to the Installation Settings screen, I opened the Booting screen, then Bootloader Options and changed the boot time from 8 seconds to 3. After saving the option, when the installer returns to the Installation Settings screen, a dialog pops up that reads "Custom bootloader isn't available anymore. Would you like to proceed with the default bootloader." I have not yet tried to reproduce this on actual hardware, so it may be a vbox thing. Reproducible: Always Steps to Reproduce: 1. Run the installer. 2. Change the boot time from 8 to 3 seconds in GRUB's options 3. Save the changes. Actual Results: A custom bootloader dialog pops up explaining that the custom bootloader is no longer available. Expected Results: The installer should return to the Installation Settings screen without error. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 6

[Bug 588679] New: yast2-printer: AutoYaST client destroys information in cupsd.conf
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=588679 http://bugzilla.novell.com/show_bug.cgi?id=588679#c0 Summary: yast2-printer: AutoYaST client destroys information in cupsd.conf Classification: openSUSE Product: openSUSE 11.3 Version: Factory Platform: All OS/Version: openSUSE 11.3 Status: NEEDINFO Severity: Major Priority: P5 - None Component: AutoYaST AssignedTo: jsmeix(a)novell.com ReportedBy: jsmeix(a)novell.com QAContact: qa(a)suse.de CC: ug(a)novell.com, mzugec(a)novell.com Found By: Development Blocker: --- When AutoYaST calls the "Write" function in printer_auto.ycp it results - a /etc/cups/cupsd.conf without any comments and without any indentation but with a strange unexpected re-ordering of the entries and - a /etc/cups/client.conf without any comments which is totally empty if there was no active entry in the /etc/cups/client.conf of the system wherefrom the AutoYaST control file was created. Because the comments provide useful and sometimes even very important information for the admin, the yast2-printer AutoYaST client destroys information. Because the ordering in /etc/cups/cupsd.conf in the cloned system is the well known upstream ordering, an unexpected strange re-ordering makes it very hard to understand the /etc/cups/cupsd.conf file afterwards. Therefore the bug severity is "major". Details: When AutoYaST calls the "Write" function in printer_auto.ycp it calls Printerlib::WriteClientSettings and Printerlib::WriteCupsSettings which call SCR::Write(.cups.client, ay) and SCR::Write(.cups.server, ay) where ay is a map as follows: ------------------------------------------------------------------------ $["cups_remote_server": $[], "server_settings": $["BrowseAllow":["all"], "BrowseOrder":["allow,deny"], "Browsing":["On"], "DefaultAuthType":["Basic"], "DefaultPolicy":["default"], "Listen":["localhost:631", "/var/run/cups/cups.sock"], "LogLevel":["info"], "SystemGroup":["sys root"], .. ------------------------------------------------------------------------ and the /etc/cups/cupsd.conf file is as follows: ------------------------------------------------------------------------ Listen localhost:631 Listen /var/run/cups/cups.sock Browsing On BrowseOrder allow,deny BrowseAllow none BrowseDeny all DefaultPolicy default DefaultAuthType Basic SystemGroup sys root .. LogLevel info ------------------------------------------------------------------------ I assume because a YCP map does not keep any ordering but the actual sequence of its entries is random, one gets also a random re-ordered cupds.conf file written. Uwe, for openSUSE 11.3 I will clean it up, compare https://bugzilla.novell.com/show_bug.cgi?id=582680#c35 Which YCP structure works for AutoYaST so that config files are written 100% identical on the target system? I.e. on one same system "Read"->"Export"->"Import"->"Write" must result 100% identical (i.e. unchanged) config files. I would prefer to have both cupsd.conf and client.conf as XML CDATA in the AutoYaST control file. Which YCP data must the "Export" function in printer_auto.ycp provide to AutoYaST so that the result are two XML CDATA sections, one for cupsd.conf and one for client.conf? -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 20

[Bug 588325] New: AUDIT-0: lockdev
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=588325 http://bugzilla.novell.com/show_bug.cgi?id=588325#c0 Summary: AUDIT-0: lockdev Classification: openSUSE Product: openSUSE 11.3 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: security-team(a)suse.de ReportedBy: lnussel(a)novell.com QAContact: qa(a)suse.de Found By: --- Blocker: --- lockdev is used to create lock files in /var/lock on behalf of users. To avoid having /var/lock world writeable the /usr/sbin/lockdev helper is setgid 'lock' and /var/lock writable only by group 'lock'. The lockdev package is currently staged for Factory in Base:System. Upstream git repo is here: git://git.debian.org/git/lockdev/lockdev -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 588293] New: systemtap crashes during preload build
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=588293 http://bugzilla.novell.com/show_bug.cgi?id=588293#c0 Summary: systemtap crashes during preload build Classification: openSUSE Product: openSUSE 11.3 Version: Milestone 3 Platform: Other OS/Version: Other Status: NEW Severity: Critical Priority: P5 - None Component: Other AssignedTo: tonyj(a)novell.com ReportedBy: coolo(a)novell.com QAContact: qa(a)suse.de Found By: --- Blocker: --- 100% reproducible ;( Program received signal SIGSEGV, Segmentation fault. #0 0x00007ffff7bd2755 in ebl_abi_cfi (ebl=0xbabababababababa, abi_info=0x7fffffff9c70) at eblabicfi.c:62 #1 0x00007ffff7bbf68e in cie_cache_initial_state (cache=0x2daa818, fde=0x2ea9c40, address=18446744071580105296, frame=0x7fffffff9d78) at cfi.c:429 #2 __libdw_frame_at_address (cache=0x2daa818, fde=0x2ea9c40, address=18446744071580105296, frame=0x7fffffff9d78) at cfi.c:480 #3 0x00007ffff7bbfc75 in dwarf_cfi_addrframe (cache=0x2daa818, address=18446744071580105296, frame=<value optimized out>) at dwarf_cfi_addrframe.c:70 #4 0x00000000004fd4c7 in dwflpp::get_cfa_ops (this=0x1967a60, pc=18446744071580105296) at dwflpp.cxx:2835 #5 0x0000000000504e1c in dwflpp::translate_location (this=0x1967a60, pool=0x7fffffff9f70, attr=0x7fffffffa030, pc=18446744071580105296, fb_attr=0x7fffffffa050, tail=0x7fffffffa118, e=0x2db49f0) at dwflpp.cxx:1731 #6 0x0000000000508d98 in dwflpp::literal_stmt_for_local (this=0x1967a60, scopes=..., pc=18446744071580105296, local=<value optimized out>, e=0x2db49f0, lvalue=false, ty=@0x2db4bb8) at dwflpp.cxx:2341 #7 0x00000000004a5241 in dwarf_var_expanding_visitor::visit_target_symbol (this=0x7fffffffa6f0, e=0x2db49f0) at tapsets.cxx:2422 #8 0x000000000043a2a9 in require<expression> (this=0x7fffffffa6f0, e=0x2db49a0) at staptree.h:866 #9 replace<expression> (this=0x7fffffffa6f0, e=0x2db49a0) at staptree.h:882 #10 update_visitor::visit_functioncall (this=0x7fffffffa6f0, e=0x2db49a0) at staptree.cxx:2436 #11 0x00000000004399df in require<expression> (this=0x7fffffffa6f0, e=0x1979f70) at staptree.h:866 #12 replace<expression> (this=0x7fffffffa6f0, e=0x1979f70) at staptree.h:882 #13 update_visitor::visit_concatenation (this=0x7fffffffa6f0, e=0x1979f70) at staptree.cxx:2381 #14 0x0000000000438da9 in require<expression> (this=0x7fffffffa6f0, e=0x2db5010) at staptree.h:866 #15 replace<expression> (this=0x7fffffffa6f0, e=0x2db5010) at staptree.h:882 #16 update_visitor::visit_print_format (this=0x7fffffffa6f0, e=0x2db5010) at staptree.cxx:2444 #17 0x0000000000436e3f in require<expression> (this=0x7fffffffa6f0, s=0x2db5240) at staptree.h:866 #18 replace<expression> (this=0x7fffffffa6f0, s=0x2db5240) at staptree.h:882 #19 update_visitor::visit_expr_statement (this=0x7fffffffa6f0, s=0x2db5240) at staptree.cxx:2238 #20 0x00000000004368a9 in require<statement> (this=0x7fffffffa6f0, s=0x2276690) at staptree.h:866 #21 replace<statement> (this=0x7fffffffa6f0, s=0x2276690) at staptree.h:882 #22 update_visitor::visit_block (this=0x7fffffffa6f0, s=0x2276690) at staptree.cxx:2219 #23 0x0000000000491fb6 in require<statement> (this=0x2db5130, funcname=<value optimized out>, filename=<value optimized out>, line=1326, module=..., section=..., dwfl_addr=18446744071580105296, addr=1259712, q=..., scope_die=0x2276608) at staptree.h:866 #24 replace<statement> (this=0x2db5130, funcname=<value optimized out>, filename=<value optimized out>, line=1326, module=..., section=..., dwfl_addr=18446744071580105296, addr=1259712, q=..., scope_die=0x2276608) at staptree.h:882 #25 dwarf_derived_probe::dwarf_derived_probe (this=0x2db5130, funcname=<value optimized out>, filename=<value optimized out>, line=1326, module=..., section=..., dwfl_addr=18446744071580105296, addr=1259712, q=..., scope_die=0x2276608) at tapsets.cxx:2917 #26 0x0000000000494294 in dwarf_query::add_probe_point (this=0x7fffffffb070, funcname=..., filename=<value optimized out>, line=<value optimized out>, scope_die=<value optimized out>, addr=18446744071580105296) at tapsets.cxx:1071 #27 0x000000000049454a in query_statement (func=..., file=<value optimized out>, line=-25224, scope_die=0x1, stmt_addr=186, q=0x7fffffffb070) at tapsets.cxx:1158 #28 0x00000000004945f3 in query_func_info (entrypc=<value optimized out>, fi=<value optimized out>, q=0x7fffffffb070) at tapsets.cxx:1349 #29 0x0000000000495a2f in query_cu (cudie=0x7fffffff9c70, arg=0x7fffffffb070) at tapsets.cxx:1616 #30 0x0000000000500295 in dwflpp::iterate_over_cus (this=<value optimized out>, callback=0x4957a0 <query_cu(Dwarf_Die*, void*)>, data=0x7fffffffb070) at dwflpp.cxx:416 #31 0x0000000000495558 in dwarf_query::handle_query_module (this=0x7fffffffb070) at tapsets.cxx:883 #32 0x000000000049cbd7 in query_module (mod=0x196a940, name=<value optimized out>, addr=<value optimized out>, arg=0x7fffffffb070) at tapsets.cxx:1811 #33 0x00007ffff7bc45aa in dwfl_getmodules (dwfl=0x1967fe0, callback=0x49ca00 <query_module(Dwfl_Module*, void**, char const*, Dwarf_Addr, void*)>, arg=0x7fffffffb070, offset=<value optimized out>) at dwfl_getmodules.c:103 #34 0x0000000000493448 in dwarf_builder::build (this=<value optimized out>, sess=<value optimized out>, base=<value optimized out>, location=<value optimized out>, parameters=..., finished_results=<value optimized out>) at tapsets.cxx:4137 #35 0x0000000000445b44 in match_node::find_and_build (this=0x1963930, s=<value optimized out>, p=<value optimized out>, loc=<value optimized out>, pos=2, results=<value optimized out>) at elaborate.cxx:388 #36 0x0000000000445eae in match_node::find_and_build (this=0x19607d0, s=<value optimized out>, p=<value optimized out>, loc=<value optimized out>, pos=1, results=<value optimized out>) at elaborate.cxx:477 #37 0x0000000000445eae in match_node::find_and_build (this=0x758f10, s=<value optimized out>, p=<value optimized out>, loc=<value optimized out>, pos=0, results=<value optimized out>) at elaborate.cxx:477 #38 0x0000000000448ea0 in derive_probes (s=..., p=0x807570, dps=..., optional=<value optimized out>) at elaborate.cxx:715 #39 0x0000000000450b4d in semantic_pass_symbols (s=...) at elaborate.cxx:1210 #40 semantic_pass (s=...) at elaborate.cxx:1494 #41 0x000000000040fe3f in main (argc=<value optimized out>, argv=<value optimized out>) at main.cxx:1190 ==21537== Copyright (C) 2002-2009, and GNU GPL'd, by Julian Seward et al. ==21537== Using Valgrind-3.5.0 and LibVEX; rerun with -h for copyright info ==21537== Command: stap -s 3 -p 4 -DMAXSTRINGSIZE=300 -DMAXSKIPPED=2000 -r 2.6.33-5-default -m preloadtrace obj/default/preloadtrace.stp ==21537== ==21537== Conditional jump or move depends on uninitialised value(s) ==21537== at 0x4E4A8CB: __libdwfl_set_cfi (dwfl_module_dwarf_cfi.c:57) ==21537== by 0x4FD491: dwflpp::get_cfa_ops(unsigned long) (dwflpp.cxx:2829) ==21537== by 0x504E1B: dwflpp::translate_location(obstack*, Dwarf_Attribute*, unsigned long, Dwarf_Attribute*, location**, target_symbol const*) (dwflpp.cxx:1731) ==21537== by 0x508D97: dwflpp::literal_stmt_for_local(std::vector<Dwarf_Die, std::allocator<Dwarf_Die> >&, unsigned long, std::string const&, target_symbol const*, bool, exp_type&) (dwflpp.cxx:2341) ==21537== by 0x4A5240: dwarf_var_expanding_visitor::visit_target_symbol(target_symbol*) (tapsets.cxx:2422) ==21537== by 0x43A2A8: update_visitor::visit_functioncall(functioncall*) (staptree.h:866) ==21537== by 0x4399DE: update_visitor::visit_concatenation(concatenation*) (staptree.h:866) ==21537== by 0x438DA8: update_visitor::visit_print_format(print_format*) (staptree.h:866) ==21537== by 0x436E3E: update_visitor::visit_expr_statement(expr_statement*) (staptree.h:866) ==21537== by 0x4368A8: update_visitor::visit_block(block*) (staptree.h:866) ==21537== by 0x491FB5: dwarf_derived_probe::dwarf_derived_probe(std::string const&, std::string const&, int, std::string const&, std::string const&, unsigned long, unsigned long, dwarf_query&, Dwarf_Die*) (staptree.h:866) ==21537== by 0x494293: dwarf_query::add_probe_point(std::string const&, char const*, int, Dwarf_Die*, unsigned long) (tapsets.cxx:1071) ==21537== -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 8