March 2010 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 591729] New: gnome-volume-control-applet crashes when adjusting volume
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=591729 http://bugzilla.novell.com/show_bug.cgi?id=591729#c0 Summary: gnome-volume-control-applet crashes when adjusting volume Classification: openSUSE Product: openSUSE 11.3 Version: Factory Platform: x86-64 OS/Version: openSUSE 11.3 Status: NEW Severity: Normal Priority: P5 - None Component: GNOME AssignedTo: bnc-team-gnome(a)forge.provo.novell.com ReportedBy: lchiquitto(a)novell.com QAContact: qa(a)suse.de Found By: --- Blocker: --- gnome-volume-control-applet crashes with a segmentation fault every time I try to adjust the volume. Here's the back trace: (gdb) thr a a bt Thread 2 (Thread 2663): #0 0x00007fd324b8ca53 in __poll (fds=<value optimized out>, nfds=<value optimized out>, timeout=<value optimized out>) at ../sysdeps/unix/sysv/linux/poll.c:87 #1 0x00007fd325082f54 in g_main_context_poll (context=0x658b70, block=<value optimized out>, dispatch=<value optimized out>) at gmain.c:2904 #2 g_main_context_iterate (context=0x658b70, block=<value optimized out>, dispatch=<value optimized out>) at gmain.c:2586 #3 0x00007fd325083862 in IA__g_main_loop_run (loop=0x717240) at gmain.c:2799 #4 0x00007fd325ffc877 in IA__gtk_main () at gtkmain.c:1219 #5 0x00000000004087af in main (argc=1, argv=0x7fff10c3eba8) at applet-main.c:92 Thread 1 (Thread 3162): #0 pa_atomic_load (o=0x4545454545454545) at pulse/operation.c:68 #1 pa_operation_unref (o=0x4545454545454545) at pulse/operation.c:68 #2 0x00007fd311cacbfe in stream_drain_cb (s=0x77df30, success=<value optimized out>, userdata=0x758d90) at pulse.c:658 #3 0x00007fd32534a3e5 in pa_stream_simple_ack_callback (pd=<value optimized out>, command=<value optimized out>, tag=<value optimized out>, t=<value optimized out>, userdata=0x7144c0) at pulse/stream.c:2046 #4 0x00007fd321aaf2f3 in run_action (pd=0x72ca30, r=0x6c3640, command=2, ts=0x78dbf0) at pulsecore/pdispatch.c:274 #5 0x00007fd321aaf7f9 in pa_pdispatch_run (pd=0x72ca30, packet=<value optimized out>, creds=0x791320, userdata=0x758e70) at pulsecore/pdispatch.c:326 #6 0x00007fd325335bad in pstream_packet_callback (p=<value optimized out>, packet=0x7b44b0, creds=0x791320, userdata= 0x758e70) at pulse/context.c:346 #7 0x00007fd321ab3ee4 in do_read (p=0x7911d0) at pulsecore/pstream.c:816 #8 do_something (p=0x7911d0) at pulsecore/pstream.c:184 #9 0x00007fd32534546c in dispatch_pollfds (m=0x73d400) at pulse/mainloop.c:688 #10 pa_mainloop_dispatch (m=0x73d400) at pulse/mainloop.c:933 #11 0x00007fd325345825 in pa_mainloop_iterate (m=0x73d400, block=<value optimized out>, retval=0x0) at pulse/mainloop.c:964 #12 0x00007fd3253458d0 in pa_mainloop_run (m=0x73d400, retval=0x0) at pulse/mainloop.c:979 #13 0x00007fd3253533bb in thread (userdata=0x720970) at pulse/thread-mainloop.c:94 #14 0x00007fd321ac08e8 in internal_thread_func (userdata=0x7591d0) at pulsecore/thread-posix.c:72 #15 0x00007fd324e2ba3f in start_thread (arg=0x7fd30dca8710) at pthread_create.c:297 #16 0x00007fd324b95c1d in clone () at ./sysdeps/unix/sysv/linux/x86_64/clone.S:112 #17 0x0000000000000000 in ?? () -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 16

[Bug 591714] New: xdg-open and no default browser in LXDE
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=591714 http://bugzilla.novell.com/show_bug.cgi?id=591714#c0 Summary: xdg-open and no default browser in LXDE Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: X11 Applications AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: mail(a)lutz-thuns.de QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; de; rv:1.9.2.2) Gecko/20100317 SUSE/3.6.2-1.2 Firefox/3.6.2 When trying to open URLs out XChat xdg-open says "no method available for opening..." Reproducible: Always Steps to Reproduce: 1. 2. 3. Actual Results: URL not opened in browser Expected Results: Default browser should be used to open URL -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 15

[Bug 591705] New: [upstart] typo in start-ttys.conf
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=591705 http://bugzilla.novell.com/show_bug.cgi?id=591705#c0 Summary: [upstart] typo in start-ttys.conf Classification: openSUSE Product: openSUSE 11.3 Version: Milestone 4 Platform: i586 OS/Version: openSUSE 11.3 Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: robin.knapp(a)ts.fujitsu.com QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; de; rv:1.9.2.2) Gecko/20100316 Firefox/3.6.2 if [ "$tty" = "/dev/tty1"]; then should be if [ "$tty" = "/dev/tty1" ]; then Also, shouldn't X_TTY be tty7 instead of tty1? Reproducible: Always -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 591704] New: encrypted tmp not accessible for normal user
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=591704 http://bugzilla.novell.com/show_bug.cgi?id=591704#c0 Summary: encrypted tmp not accessible for normal user Classification: openSUSE Product: openSUSE 11.3 Version: Milestone 4 Platform: x86-64 OS/Version: openSUSE 11.3 Status: NEW Severity: Major Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: dutchkind(a)txoriaskea.org QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; nl; rv:1.9.2.2) Gecko/20100317 SUSE/3.6.2-1.2 Firefox/3.6.2 At installation I created an encrypted tmp from a partition. The same partition is used for the same purpose by my working opensuse 11.2. When I try to log in as normal user I get an error message telling me the tmp cannot be accessed with the question if it is maybe full. It has a size of 2Gb so that's not the problem. When I log in as root I have no problem, so then I changed the rights to rw for all users and I can log in as user after that. Upon reboot however, I have the same thing again, there is no write access to tmp by any user except root, which defeats the purpose of an encrypted tmp. Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 7

[Bug 591085] New: open-vm-tools on the live media?
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=591085 http://bugzilla.novell.com/show_bug.cgi?id=591085#c0 Summary: open-vm-tools on the live media? Classification: openSUSE Product: openSUSE 11.3 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Enhancement Priority: P5 - None Component: Live Medium AssignedTo: coolo(a)novell.com ReportedBy: dominique.leuenberger(a)tmf-group.com QAContact: qa(a)suse.de Found By: --- Blocker: --- I think it could be beneficial if we would allos the installation of open-vm-tools on the live media. A lot of testing of new releases is done in Virtual Machines (virtuabox, vmware), where the live CD is used. For 'installs' in VMs with access to the repositories the tools are installed using supplements on hardware level. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 7

[Bug 590742] New: YaST gives invalid instructions for installing FRITZ!Card DSL
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=590742 http://bugzilla.novell.com/show_bug.cgi?id=590742#c0 Summary: YaST gives invalid instructions for installing FRITZ!Card DSL Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: x86 OS/Version: openSUSE 11.2 Status: NEW Severity: Normal Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: tilman(a)imap.cc QAContact: jsrain(a)novell.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; de; rv:1.9.1.8) Gecko/20100205 SeaMonkey/2.0.3 Installing openSUSE 11.2 on a standard PC with a FRITZ!Card DSL combined ISDN/DSL PCI card. (German language; quotes in this report translated to English by me.) YaST's "networking devices - ISDN low level configuration" section correctly detects the card as: Manufacturer AVM Computersysteme Vertriebs GmbH ISDN Card Fritz!Card DSL and in the "Driver" dropdown list offers a single choice: CAPI 2.0 driver CAPI with FAX G3 and DSL without source code (The dropdown list field is greyed out so the setting cannot be changed.) After clicking the OK button, a warning message window pops up stating: "You have selected a driver without source code. This driver is not part of our distribution. You can use this driver only after the installation of further software packages from AVM. Proceed according to the release notes and read the additional notices on the following web page: http://en.opensuse.org/SDB:AVM_binary_driver_for_SUSE_Linux_10.1" These instructions are invalid: 1.) The openSUSE 11.2 release notes contain none of the keywords "AVM", "Fritz", or "driver". 2.) The URL http://en.opensuse.org/SDB:AVM_binary_driver_for_SUSE_Linux_10.1 leads to a web page containing information for *some* AVM cards, but the FRITZ!Card DSL is not one of them. Reproducible: Always Steps to Reproduce: 1. Install openSUSE 11.2 on a PC equipped with a FRITZ!Card DSL PCI card. 2. In hardware configuration, ISDN section configure the listed "unconfigured" device. 3. Click OK. Actual Results: A message appears promising I'll be able to use the card if I follow the instructions given, but the instructions turn out to be impossible to follow. Expected Results: Either instructions that can be followed, or a message stating that the device cannot be used with openSUSE 11.2. After dismissing the warning message quoted above, YaST proceeds to install a bunch of "required packages": capi4linux, i4l-base, i4l-isdnlog and kinternet. If the card is actually not supported, it would be preferable to skip that step, as those packages are of no use without a supported ISDN card. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 11

[Bug 590637] New: after kernel update new boot variant look at wrong hard drive
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=590637 http://bugzilla.novell.com/show_bug.cgi?id=590637#c0 Summary: after kernel update new boot variant look at wrong hard drive Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: x86-64 OS/Version: openSUSE 11.2 Status: NEW Severity: Normal Priority: P5 - None Component: Bootloader AssignedTo: jsrain(a)novell.com ReportedBy: gvozdila(a)yahoo.com QAContact: jsrain(a)novell.com Found By: --- Blocker: --- Created an attachment (id=350135) --> (http://bugzilla.novell.com/attachment.cgi?id=350135) resul of fdisk -l User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; ru; rv:1.9.1.8) Gecko/20100204 SUSE/3.5.8-0.1.1 Firefox/3.5.8 I have 2 hard drives(really 3, but third do not use on boot process ). Bootloader installed on drive sda, and my /boot places on sdc (on primary partition). When new version of kernel appears, new variant of boot start to load not from hd(1,0) (in terms of grub), but from hd(0,0). it can be change when booting for one successful boot. Next, in Yast, right entry : kernel image /boot/vmlinuz-2.6.31.12-0.1-desktop RAM disk /boot/initrd-2.6.31.12-0.1-desktop root device(?) /dev/disk/by-id/raid-sil_agajbhdfcdab-part2 new wrong entry kernel image /media/system/vmlinuz-2.6.31.12-0.2-desktop RAM disk /media/system/initrd-2.6.31.12-0.2-desktop root device /dev/disk/by-id/raid-sil_agajbhdfcdab-part2 note, that /media/system is directory when old windows root-folder mount, and it places on /hda, but not on /dev/disk/by-id/raid-sil_agajbhdfcdab-part2, cause in just "link" on /hdc ... Reproducible: Always Steps to Reproduce: 1. install bootloader on 1 disk, /boot on second (on primary, but not on first partition of second disk) 2. wait for system kernel update 3. new configuration can not be load -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 18

[Bug 590329] New: /etc/modprobe.d/vmnics missing in open-vm-tools
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=590329 http://bugzilla.novell.com/show_bug.cgi?id=590329#c0 Summary: /etc/modprobe.d/vmnics missing in open-vm-tools Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: Other OS/Version: openSUSE 11.2 Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: robin.knapp(a)ts.fujitsu.com QAContact: qa(a)suse.de Found By: Other Blocker: --- Since openSUSE 11.2, the file /etc/modprobe.d/vmnics is missing which loads the vmxnet driver if vmware tools are installed. >From the Changelog: * Mon Mar 9 2009 mmarek(a)suse.cz - renamed modprobe config to /etc/modprobe.d/50-vmnics.conf (required by new module-init-tools). ..but the new file is missing -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 16

[Bug 590198] New: Installing packages with YMP gives the remaining package to install in -ve value
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=590198 http://bugzilla.novell.com/show_bug.cgi?id=590198#c0 Summary: Installing packages with YMP gives the remaining package to install in -ve value Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: x86-64 OS/Version: openSUSE 11.2 Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: nagappan(a)gmail.com QAContact: jsrain(a)novell.com Found By: --- Blocker: --- Created an attachment (id=349794) --> (http://bugzilla.novell.com/attachment.cgi?id=349794) YaST screenshot User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.1.8) Gecko/20100204 SUSE/3.5.8-0.1.1 Firefox/3.5.8 I tried installing restricted packages from http://opensuse-community.org/Restricted_Formats/11.2 and I'm currently using openSUSE GNOME Reproducible: Always Steps to Reproduce: 1. Install restricted package from the link provided in openSUSE wiki 2. Select YaST to install, when Firefox pops up, what to do with this file 3. Actual Results: number of packages installed in -ve value Expected Results: number of packages installed should be in +ve value will attach yast log file -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 7

[Bug 589994] New: gpg incurs problem at encryption, returns error code 2, breaks scripts
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=589994 http://bugzilla.novell.com/show_bug.cgi?id=589994#c0 Summary: gpg incurs problem at encryption, returns error code 2, breaks scripts Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: Other OS/Version: openSUSE 11.2 Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: alext(a)novell.com QAContact: qa(a)suse.de Found By: --- Blocker: --- Just noticed on my updated 11.2 system. Probably introduced with a recent update to either gpg or gpg-agent. When symmetrically encrypting a file, gpg outputs the string "gpg: problem with the agent: Not implemented" and returns error code 2 after completion. The file does get successfully encrypted; however, since gpg returns error code 2, any scripts that use gpg will assume that the gpg failed (since the return code was not zero) and fail themselves. Transcript follows: [zuul:~]$ echo "hello there" > tstfile [zuul:~]$ cat tstfile | gpg --sign --symmetric > tstfile.gpg You need a passphrase to unlock the secret key for user: "Alex Tsariounov <XXX(a)XXX.XXX.net>" 1024-bit DSA key, ID EC21BF7F, created 2003-06-30 gpg: 3DES encryption will be used gpg: problem with the agent: Not implemented [zuul:~]$ echo $? 2 [zuul:~]$ cat tstfile.gpg | gpg gpg: 3DES encrypted data gpg: encrypted with 1 passphrase hello there gpg: Signature made Sat 20 Mar 2010 11:24:16 AM MDT using DSA key ID EC21BF7F gpg: Good signature from "Alex Tsariounov <XXX(a)XXX.XXX.net>" gpg: WARNING: message was not integrity protected [zuul:~]$ -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 14