September 2009 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 537428] New: sysconfig: minor spelling error
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=537428 Summary: sysconfig: minor spelling error Classification: openSUSE Product: openSUSE 11.1 Version: Final Platform: x86-64 OS/Version: Other Status: NEW Severity: Minor Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: jnelson-suse(a)jamponi.net QAContact: qa(a)suse.de Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686 (x86_64); en-US; rv:1.9.0.13) Gecko/2009080200 SUSE/3.0.13-0.1.2 Firefox/3.0.13 in /etc/sysconfig/network/ifcfg.template: beeing used, WEP or WPA. WEP (Wired Equivalent Privacy) is a system to should be: being used, WEP or WPA. WEP (Wired Equivalent Privacy) is a system to Also, I'm not sure where it comes from but I also see this on boot: eth0 device: VIA Technologies, Inc. VT6120/VT6121/VT6122 Gigabit Ethernet Adapter (rev 11) eth0 . . . is just beeing set up eth0 IP address: 192.168.2.10/24 the "being" is also misspelled here. Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 537364] New: Most Session Ending Actions don't work
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=537364 Summary: Most Session Ending Actions don't work Classification: openSUSE Product: openSUSE 11.2 Version: Milestone 6 Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Xfce AssignedTo: bnc-team-xfce(a)forge.provo.novell.com ReportedBy: binner(a)kde.org QAContact: qa(a)suse.de Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.1.2) Gecko/20090730 SUSE/3.5.2-2.1 Firefox/3.5.2 Milestone 7 XFCE net install (means xdm), choosing "Restart", "Shutdown", "Suspend" or "Hibernate" from "Actions Button" applet fail with hal auth failure. Reproducible: Always -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 7

[Bug 537239] New: fail2ban fails to start with existing socket file
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=537239 Summary: fail2ban fails to start with existing socket file Classification: openSUSE Product: openSUSE 11.2 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Enhancement Priority: P5 - None Component: Network AssignedTo: lchiquitto(a)novell.com ReportedBy: lmuelle(a)novell.com QAContact: qa(a)suse.de CC: detlef(a)die-mafia.de Found By: --- Existing socket files are not removed by while the system startup like it is the case for lock files for example. The greylistd already has a workaround to address such a kind of issue. For fail2ban it would look like: # a cleanup workaround, since /etc/init.d/boot.local removes only # regular files, and not sockets socket=/var/run/fail2ban/fail2ban.sock if test -e $socket; then if ! lsof -n $socket &>/dev/null; then rm $socket fi fi We might even consider this as a general bug report for the base system. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 14

[Bug 537112] New: kernel regression: iwlagn 0000:03:00.0: iwlwifi-4965-2.ucode firmware file req failed: -2
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=537112 Summary: kernel regression: iwlagn 0000:03:00.0: iwlwifi-4965-2.ucode firmware file req failed: -2 Classification: openSUSE Product: openSUSE 11.2 Version: Milestone 6 Platform: x86-64 OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: gp(a)novell.com QAContact: qa(a)suse.de CC: jimmac(a)novell.com, vbotka(a)novell.com Found By: Product Management Updating my FACTORY machine today, it turns out that wireless no longer works when the same setup used to work just nicely with the FACTORY kernel as of ten or so days ago: Sep 6 23:00:12 trevally ifdown: wlan0 device: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61) Sep 6 23:00:12 trevally network: Starting the NetworkManager Sep 6 23:00:17 trevally kernel: [ 2953.260742] e1000e 0000:00:19.0: irq 31 for MSI/MSI-X Sep 6 23:00:17 trevally kernel: [ 2953.316286] e1000e 0000:00:19.0: irq 31 for MSI/MSI-X Sep 6 23:00:17 trevally kernel: [ 2953.317105] ADDRCONF(NETDEV_UP): eth0: link is not ready Sep 6 23:00:17 trevally kernel: [ 2953.319380] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-4965-2.ucode Sep 6 23:01:17 trevally kernel: [ 3013.316187] iwlagn 0000:03:00.0: iwlwifi-4965-2.ucode firmware file req failed: -2 Sep 6 23:01:17 trevally kernel: [ 3013.316196] iwlagn 0000:03:00.0: Could not read microcode: -2 Sep 6 23:01:17 trevally kernel: [ 3013.321674] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-4965-2.ucode Sep 6 23:02:17 trevally kernel: [ 3073.320260] iwlagn 0000:03:00.0: iwlwifi-4965-2.ucode firmware file req failed: -2 Sep 6 23:02:17 trevally kernel: [ 3073.320269] iwlagn 0000:03:00.0: Could not read microcode: -2 Booting a 2.6.27 kernel (SLES 11 HEAD) instead, with the same userland and partitions, still works without a problem. In other words, this is a regressions on the 2.6.31 kernel tree! -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 20

[Bug 537052] New: YaSt2 - ISDN installs hisax when mISDN is loaded from kernel
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=537052 Summary: YaSt2 - ISDN installs hisax when mISDN is loaded from kernel Classification: openSUSE Product: openSUSE 11.2 Version: Factory Platform: Other OS/Version: SuSE Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: gjn(a)gjn.priv.at QAContact: jsrain(a)novell.com Found By: --- User-Agent: Mozilla/5.0 (compatible; Konqueror/4.3; Linux) KHTML/4.3.1 (like Gecko) SUSE when I install 11.2 the new kernel module (mISDN) are loaded automatic for my HFC-PCI Card, after I like to configure ISDN with YaST2-ISDN the hisax driver is loaded also? Reproducible: Always Steps to Reproduce: 1.install the 11.2 with a hfc-pci card 2.configure ISDN with YaST2 3.lsmod -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 19

[Bug 536778] New: gnome-main-menu issues doesn't display correctly
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=536778 Summary: gnome-main-menu issues doesn't display correctly Classification: openSUSE Product: openSUSE 11.2 Version: Factory Platform: i686 OS/Version: openSUSE 11.1 Status: NEW Severity: Normal Priority: P5 - None Component: GNOME AssignedTo: bnc-team-gnome(a)forge.provo.novell.com ReportedBy: riggwelter(a)opensuse.org QAContact: qa(a)suse.de Found By: --- Using G:F/G:B/2.28. With the exception of the Status area, each area of g-m-m is displayed incorrectly: Applications: No favourites are shown, the whole menu is filed with recent apps. Documents: Again, no favourites, only recent. Places: Only Favourites are shown, none of the standard ones. So, on the three 'tabs', the top section is missing, bottom is shown. System area is totally empty. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 15

[Bug 536729] New: openldap: ldapi socket behind closed directory
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=536729 Summary: openldap: ldapi socket behind closed directory Classification: openSUSE Product: openSUSE 11.1 Version: Final Platform: x86-64 OS/Version: Linux Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: jengelh(a)medozas.de QAContact: qa(a)suse.de Found By: Beta-Customer Enabling ldapi (ldap over unix socket) is easy enough by changing /etc/sysconfig/openldap. However, the socket, located in /var/run/slapd/ldapi is inaccessible for regular users (e.g. nss_ldap) because /var/run/slapd has too restrictive modes (rwx------). This directory should, unless I am missing something, be made at least cd-able (rwx--x--x). -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 6

[Bug 536535] New: gvim: assertion `static_gravity_supported' failed
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=536535 Summary: gvim: assertion `static_gravity_supported' failed Classification: openSUSE Product: openSUSE 11.2 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Minor Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: jmatejek(a)novell.com QAContact: qa(a)suse.de Found By: --- whenever i run gvim, the following gets printed into console: ** (gvim:17637): CRITICAL **: gtk_form_set_static_gravity: assertion `static_gravity_supported' failed ** (gvim:17637): CRITICAL **: gtk_form_set_static_gravity: assertion `static_gravity_supported' failed ** (gvim:17637): CRITICAL **: gtk_form_set_static_gravity: assertion `static_gravity_supported' failed ** (gvim:17637): CRITICAL **: gtk_form_set_static_gravity: assertion `static_gravity_supported' failed ** (gvim:17637): CRITICAL **: gtk_form_set_static_gravity: assertion `static_gravity_supported' failed as i'm using it mainly from the console, this gets annoying rather quickly. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 536215] New: Check installation of package "jzlib-demo"
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=536215 Summary: Check installation of package "jzlib-demo" Classification: openSUSE Product: openSUSE 11.1 Version: Final Platform: x86-64 OS/Version: openSUSE 11.1 Status: NEW Severity: Normal Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: Markus.Elfring(a)web.de QAContact: jsrain(a)novell.com Found By: --- Can the package "jzlib-demo" be improved so that the error message will not appear at the end? Sonne:~ # zypper update jzlib-demo Loading repository data... Reading installed packages... Resolving package dependencies... Problem: cannot install both jzlib-demo-1.0.7-0.pm.2.noarch and jzlib-demo-1.0.7-6.14.noarch Solution 1: install jzlib-demo-1.0.7-6.14.noarch (with vendor change) http://packman.links2linux.de --> openSUSE Build Service Solution 2: do not ask to install a solvable providing jzlib-demo > 1.0.7-0.pm.2 Choose from above solutions by number or cancel [1/2/C]: 1 Resolving dependencies... Resolving package dependencies... The following package is going to be upgraded: jzlib-demo The following package is going to change vendor: jzlib-demo Overall download size: 6.0 K. No additional space will be used or freed after the operation. Continue? [YES/no]: Retrieving package jzlib-demo-1.0.7-6.14.noarch (1/1), 6.0 K (12.0 K unpacked) Retrieving: jzlib-demo-1.0.7-6.14.noarch.rpm [done] Installing: jzlib-demo-1.0.7-6.14 [error] Installation of jzlib-demo-1.0.7-6.14 failed: (with --nodeps --force) Error: Subprocess failed. Error: RPM failed: error: unpacking of archive failed on file /usr/share/jzlib: cpio: rename failed - Is a directory Abort, retry, ignore? [A/r/i]: -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 535752] New: xsane crashed
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=535752 Summary: xsane crashed Classification: openSUSE Product: openSUSE 11.2 Version: Milestone 6 Platform: i686 OS/Version: SuSE Other Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: 80classics(a)gmail.com QAContact: qa(a)suse.de Found By: --- Created an attachment (id=316068) --> (http://bugzilla.novell.com/attachment.cgi?id=316068) xsane crashed User-Agent: Mozilla/5.0 (X11; U; Linux i686; it; rv:1.9.1.2) Gecko/20090730 SUSE/3.5.2-2.4 Firefox/3.5.2 I've configured my HP Scanjet 3800 scanner using YAST. I've selected the right sane backend from YAST database and the configuration has been successfully saved. xsane has always crashed with the same error (more details below) Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 33