August 2009 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 506701] New: offer a distro downgrade option for zypper/YaST2
by bugzilla_noreply＠novell.com 17 May '11

17 May '11

http://bugzilla.novell.com/show_bug.cgi?id=506701 Summary: offer a distro downgrade option for zypper/YaST2 Classification: openSUSE Product: openSUSE 11.1 Version: Final Platform: All OS/Version: openSUSE 11.1 Status: NEW Severity: Normal Priority: P5 - None Component: libzypp AssignedTo: zypp-maintainers(a)forge.provo.novell.com ReportedBy: estellnb(a)gmail.com QAContact: qa(a)suse.de Found By: --- User-Agent: Mozilla/5.0 (compatible; Konqueror/3.5; Linux) KHTML/3.5.10 (like Gecko) SUSE By now zypper only offers two options for installing new software: in & dup. My request would be to supplement dup with a ddn-option (distribution downgrade). It just happens quite often that one has to remove all the packages just installed via dup from the buildservice because they do not work properly. As zypper does not offer an undo function providing ddn would probably be the only way to achieve this. It could do something like the follwing commands: zypper in -f $( grep '|X11-Xorg|' /var/log/zypp/history | grep 'install' | cut -f 3 -d '|') 2>&1 | tee /dev/stderr | grep "not found in repositories"| cut -f 2 -d " " >todel zypper rm $(cat todel) i.e. downgrade all packages of X11-Xorg that are available fromout of another source; remove all other packages (although this time I had to use Yast manually to do this because zypper has complained about a lot of packages not being available which could in deed be downgraded via Yast after disabling the X11-Xorg repo.) Reproducible: Always -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 11

[Bug 524778] New: kerneloops package has invalid description in "yast2 runlevel"
by bugzilla_noreply＠novell.com 11 May '11

11 May '11

http://bugzilla.novell.com/show_bug.cgi?id=524778 Summary: kerneloops package has invalid description in "yast2 runlevel" Classification: openSUSE Product: openSUSE 11.1 Version: Final Platform: x86-64 OS/Version: openSUSE 11.1 Status: NEW Severity: Normal Priority: P5 - None Component: Development AssignedTo: pth(a)novell.com ReportedBy: ashaduri(a)gmail.com QAContact: qa(a)suse.de Found By: --- User-Agent: Opera/9.64 (X11; Linux x86_64; U; en) Presto/2.1.1 The description of kerneloops service has invalid description: ----------------------------------------------------------------------- Start kerneloops continued on second line by '#' should contain enough info for the runlevel editor to give admin some idea what this service does and what it's needed for ... (The Short-Description should already be a good hint.) ----------------------------------------------------------------------- Reproducible: Always Steps to Reproduce: 1. Install kerneloops package. 2. Run "yast2 runlevel". 3. Select kerneloops. The description that yast displays is corrupt. openSUSE 11.1 x86_64. YaST Qt GUI. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 500387] New: New project request: GoldenDict
by bugzilla_noreply＠novell.com 10 May '11

10 May '11

http://bugzilla.novell.com/show_bug.cgi?id=500387 Summary: New project request: GoldenDict Classification: openSUSE Product: openSUSE.org Version: unspecified Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: OBS Request AssignedTo: mrueckert(a)novell.com ReportedBy: dragonroot(a)gmail.com QAContact: adrian(a)novell.com Found By: --- Hi, I'm the author of the GoldenDict program and I would like to use OBS to package it for all the various distributions out there. May I? -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 8

[Bug 516413] New: KGhostView does not handle multi-orientation.
by bugzilla_noreply＠novell.com 06 May '11

06 May '11

http://bugzilla.novell.com/show_bug.cgi?id=516413 User andrew(a)joako.net added comment http://bugzilla.novell.com/show_bug.cgi?id=516413#c436173 Summary: KGhostView does not handle multi-orientation. Classification: openSUSE Product: openSUSE 11.1 Version: Final Platform: x86-64 OS/Version: openSUSE 11.1 Status: NEW Severity: Normal Priority: P5 - None Component: KDE3 AssignedTo: kde-maintainers(a)suse.de ReportedBy: andrew(a)joako.net QAContact: qa(a)suse.de Depends on: 436173 Found By: Third Party Developer/Partner +++ This bug was initially created as a clone of Bug #436173 +++ KGhostView is not correctly displaying PDF files that have more than one page orientation. It then does not print that page at all to a PostScript printer with the error (printed) ERROR: configurationerror OFFENDING COMMAND: setpagedevice ERRORINFO: Key = /PageSize Value = arraytype STACK dicttype -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 531547] New: 2.6.31 kernel breaks thermal cpu monitoring -- regression from 2.6.37 (11.1)
by bugzilla_noreply＠novell.com 02 May '11

02 May '11

http://bugzilla.novell.com/show_bug.cgi?id=531547 Summary: 2.6.31 kernel breaks thermal cpu monitoring -- regression from 2.6.37 (11.1) Classification: openSUSE Product: openSUSE 11.2 Version: Factory Platform: x86-64 OS/Version: SuSE Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: clarkt(a)cnsp.com QAContact: qa(a)suse.de Found By: --- Created an attachment (id=313114) --> (http://bugzilla.novell.com/attachment.cgi?id=313114) dmesg output from 11.1 showing thermal is seen and used User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.1.2) Gecko/20090730 SUSE/3.5.2-1.1 Firefox/3.5.2 HP updated the bios for several dv series laptops. This enabled thermal management and other acpi fixes for linux. In the 2.6.27 kernel, cpu temp is read as a valid value. In the 11.2 kernels (30 and 31) this feature is broken. Reproducible: Always Steps to Reproduce: 1.install 11.1 on a HP laptop with the bios update for linux thermal and acpi 2.cpu temp is valid and shown. thermal events work. 3.install 11.2 MS5. 4. thermal events are not seen and acpi reports that the value in dsdt is invalid Actual Results: 11.1 -- thermal management works. 11.2 -- thermal management does not work Expected Results: with bios update, the cpu temp should be seen and thermal management should work. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 24

[Bug 533588] New: text-only system should not require gfxboot, bootsplash, & splashy
by bugzilla_noreply＠novell.com 29 Apr '11

29 Apr '11

http://bugzilla.novell.com/show_bug.cgi?id=533588 Summary: text-only system should not require gfxboot, bootsplash, & splashy Classification: openSUSE Product: openSUSE 11.2 Version: Factory Platform: x86-64 OS/Version: SuSE Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: brian(a)aljex.com QAContact: jsrain(a)novell.com Found By: --- User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.2) Gecko/20090729 Firefox/3.5.2 (.NET CLR 3.5.30729) Fresh install of 11.2 MS6 Software manager auto-adds gfxboot, bootsplash, splashy, and related branding packages, even when you taboo those packages. These programs are not compatible with serial console and a text-only install should be able to exclude them. In the past, they were added by default, but it was possible to manually de-select and/or taboo them. Now, it is possible to de-select them and prevent installation one time, but every time software manager runs, they are auto-added again. The taboo flag seems to have no effect. Reproducible: Always Steps to Reproduce: 1. start with these packages not installed: bootsplash bootsplash-branding-openSUSE liblzo2-2 libx86 splashy splashy-branding-openSUSE suspend 2. run yast software manager. 3. perform no actions in software manager, just select Accept without having selected any packages to install. 4. A popup will come up showing all of the above packages auto-selected as if they were dependancies of something. 5. Cancel. Search for and taboo each of those packages. 6. You can exit software manager normally now and the packages won't be installed. 7. Repeat starting at step 2 above. Same packages are auto-added again. Ideally a text-only install choice should not even include these since they can cause problems on serial console. If you are remotely administering servers via serial console it's very important that it always works. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 7

[Bug 522354] New: BuildRequires: pciutils for RedHat:RHEL-4 project fails build
by bugzilla_noreply＠novell.com 27 Apr '11

27 Apr '11

http://bugzilla.novell.com/show_bug.cgi?id=522354 Summary: BuildRequires: pciutils for RedHat:RHEL-4 project fails build Classification: openSUSE Product: openSUSE.org Version: unspecified Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: BuildService AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: michael_e_brown(a)dell.com QAContact: adrian(a)novell.com Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.1) Gecko/20090630 Fedora/3.5-1.fc11 Firefox/3.5 Any package that buildrequires pciutils in a build against RedHat:RHEL-4 will fail the build with the following: "have choice for kernel >= 2.2 needed by pciutils: kernel-xenU kernel-largesmp kernel kernel-smp" Looks like the prjconf for rhel4 needs to have a 'prefer' statement for the kernel Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 497577] New: unexpanding of packages broken
by bugzilla_noreply＠novell.com 27 Apr '11

27 Apr '11

http://bugzilla.novell.com/show_bug.cgi?id=497577 Summary: unexpanding of packages broken Classification: openSUSE Product: openSUSE.org Version: unspecified Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: BuildService AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: poeml(a)novell.com QAContact: adrian(a)novell.com Found By: --- Hi, I tried to unexpand a checkout of a source link (osc up -u), and this results into an error message and a broken working copy. poeml@batavia510 ~/bs/home:poeml:branches:Apache-itk/apache2 % osc up At revision 47b953a37a7968a1d4f53e92f4bf5dc9. poeml@batavia510 ~/bs/home:poeml:branches:Apache-itk/apache2 % osc up -u Unexpanding to rev 890ef8df567f150c6ff810e689ed35a4 D Apache.xpm D SUSE-NOTICE D a2enflag D a2enmod D apache-20-22-upgrade D apache-ssl-stuff.tar.bz2 D apache2-README D apache2-README.QUICKSTART D apache2-check_forensic D apache2-default-server.conf D apache2-errors.conf D apache2-httpd.conf D apache2-listen.conf D apache2-manual.conf D apache2-mod_autoindex-defaults.conf D apache2-mod_info.conf D apache2-mod_log_config.conf D apache2-mod_mime-defaults.conf D apache2-mod_status.conf D apache2-mod_userdir.conf D apache2-mod_usertrack.conf D apache2-server-tuning.conf D apache2-ssl-global.conf D apache2-vhost-ssl.template D apache2-vhost.template D apache2.changes D apache2.firewall D apache2.logrotate D apache2.spec D apache2.ssl-firewall D apache2.xml D certificate.sh D favicon.ico D find_httpd2_includes D find_mpm D gensslcert D get_includes D get_module_list D httpd-2.0.49-log_server_status.dif D httpd-2.0.54-envvars.dif D httpd-2.1.3alpha-layout.dif D httpd-2.1.9-apachectl.dif D httpd-2.2.0-apxs-a2enmod.dif D httpd-2.2.10-mpm-itk.patch D httpd-2.2.11.tar.bz2 D httpd-2.x.x-logresolve.patch D load_configuration D mkcert.sh.gz D permissions.apache2 D rc.apache2 D robots.txt D sysconf_addword D sysconfig.apache2 A _link 'NoneType' object has no attribute 'md5' [1] 27366 exit 1 osc up -u poeml@batavia510 ~/bs/home:poeml:branches:Apache-itk/apache2 % osc st D project.diff ! project1.diff poeml@batavia510 ~/bs/home:poeml:branches:Apache-itk/apache2 % l total 4 -rw-r--r-- 1 poeml suse 144 2008-11-23 13:57 _link The packages are missing. It seems that the update was incomplete (aborted). I'm using osc from trunk (r7159). This must have been broken recently. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 496821] New: osc needs package "build", a too generic name
by bugzilla_noreply＠novell.com 27 Apr '11

27 Apr '11

http://bugzilla.novell.com/show_bug.cgi?id=496821 Summary: osc needs package "build", a too generic name Classification: openSUSE Product: openSUSE.org Version: unspecified Platform: Other OS/Version: Other Status: NEW Severity: Enhancement Priority: P5 - None Component: BuildService AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: jnieuwenhuizen(a)novell.com QAContact: adrian(a)novell.com CC: michael.meeks(a)novell.com Found By: --- Please change the name of the openSUSE build service package which contains "build.rpm" to something less generic, say obs-build opensuse-build opensuse-build-servic-build It feels like stretching the global perspective (just) a bit to install a package called "build" on my Ubuntu box $ dpkg -l build Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Cfg-files/Unpacked/Failed-cfg/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad) ||/ Naam Versie Omschrijving +++-==============-==============-============================================ ii build 2009.04.20-1 A script to build SUSE Linux RPMs -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 493638] New: Package gets build but is marked as failed - perhaps cause of a broken pipe
by bugzilla_noreply＠novell.com 27 Apr '11

27 Apr '11

http://bugzilla.novell.com/show_bug.cgi?id=493638 Summary: Package gets build but is marked as failed - perhaps cause of a broken pipe Classification: openSUSE Product: openSUSE.org Version: unspecified Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: BuildService AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: bitdealer(a)gmail.com QAContact: adrian(a)novell.com Found By: --- Created an attachment (id=285048) --> (http://bugzilla.novell.com/attachment.cgi?id=285048) The log of server:monitoring snort when this happened for openSUSE 11.0 i586 Every now and then a package builds just fine but still gets marked as failed. Only noticeable thing is the following line in the build log: dd: writing `standard output': Broken pipe -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3