April 2009 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 492390] New: debugedit fails under x86_64
by bugzilla_noreply＠novell.com 13 May '09

13 May '09

http://bugzilla.novell.com/show_bug.cgi?id=492390 Summary: debugedit fails under x86_64 Classification: openSUSE Product: openSUSE 11.1 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: cmorve69(a)yahoo.es QAContact: qa(a)suse.de Found By: Community User See package libasa at home:RedDwarf OBS repo: https://build.opensuse.org/package/show?package=libasa&project=home:RedDwarf The package builds correctly for openSUSE 10.3 and 11.0, i586 and x86-64; and also for openSUSE 11.1 i586. But the debug extraction fails for openSUSE 11.1 x86-64. If I remove "yasm" from BuildRequires, and so the assembler part isn't used, works fine. When using yasm, two additional debugging sections are added to the ELF file: "stab" and "stabstr". Something similar (the same?) was reported at http://article.gmane.org/gmane.linux.redhat.rpm.devel/2621 https://bugzilla.redhat.com/show_bug.cgi?id=453506 -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 5

[Bug 498306] New: gpgsm: invalid debug-level `basicverbose' given
by bugzilla_noreply＠novell.com 13 May '09

13 May '09

http://bugzilla.novell.com/show_bug.cgi?id=498306 Summary: gpgsm: invalid debug-level `basicverbose' given Classification: openSUSE Product: openSUSE 11.1 Version: Final Platform: i586 OS/Version: openSUSE 11.1 Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: borisz(a)borisz.net QAContact: qa(a)suse.de Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; hu-HU; rv:1.9.0.8) Gecko/2009032600 SUSE/3.0.8-1.1.1 Firefox/3.0.8 gpgsm gives an error message when I try run it. It happens with versions 2.0.9-25.105 and 2.0.11-25.1 borisz@linux-z2k7:~> gpgsm gpgsm: invalid debug-level `basicverbose' given Reproducible: Always Steps to Reproduce: run gpgsm -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 6

[Bug 493303] New: bash completion bug for "cd"
by bugzilla_noreply＠novell.com 12 May '09

12 May '09

http://bugzilla.novell.com/show_bug.cgi?id=493303 User koenig(a)linux.de added comment http://bugzilla.novell.com/show_bug.cgi?id=493303#c487252 Summary: bash completion bug for "cd" Classification: openSUSE Product: openSUSE 11.1 Version: Final Platform: x86-64 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: koenig(a)linux.de QAContact: qa(a)suse.de Found By: --- mkdir new cd new mkdir 60_x_Deutschland_-_Die_Jahresschau_$27$ cd *27*<TAB> expands to cd 60_x_Deutschland_-_Die_Jahresschau_(27\)/ ^^ instead of cd 60_x_Deutschland_-_Die_Jahresschau_$27$/ ^ which is shown e.g. by cd 60<TAB> after "complete -r" the problem is gone! # complete -p cd complete -o dirnames -o nospace -F _cd_ cd # grep -rl _cd_ /etc/*prof* /etc/profile.d/complete.bash # rpm -qf /etc/profile.d/complete.bash aaa_base-11.1-10007.15.1 please also note bug #487252 for another buggy completion in aaa_base.rpm. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 6

[Bug 499318] New: bootconcept.xml - chkconfig not systemitem
by bugzilla_noreply＠novell.com 12 May '09

12 May '09

http://bugzilla.novell.com/show_bug.cgi?id=499318 Summary: bootconcept.xml - chkconfig not systemitem Classification: openSUSE Product: openSUSE 11.1 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Minor Priority: P5 - None Component: Documentation AssignedTo: ke(a)novell.com ReportedBy: kkemenczy(a)novell.com QAContact: ke(a)novell.com Found By: --- <para> All of these settings may also be changed with the help of the &yast; module. If you need to check the status on the command line, use the tool chkconfig, described in the chkconfig(8) man page. </para> should be <para> All of these settings may also be changed with the help of the &yast; module. If you need to check the status on the command line, use the tool <systemitem>chkconfig</systemitem>, described in the chkconfig(8) man page. </para> -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 492235] New: System has no ACPI unless DSDT file patched
by bugzilla_noreply＠novell.com 11 May '09

11 May '09

http://bugzilla.novell.com/show_bug.cgi?id=492235 Summary: System has no ACPI unless DSDT file patched Classification: openSUSE Product: openSUSE 11.1 Version: Final Platform: x86-64 OS/Version: openSUSE 11.1 Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: helio.schechtman(a)gmail.com QAContact: qa(a)suse.de Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.0.7) Gecko/2009022800 SUSE/3.0.7-1.2 Firefox/3.0.7 The system does not has ACPI unless DSDT file is patched according to attached file Reproducible: Always Steps to Reproduce: 1. 2. 3. Actual Results: ACPI does not work Expected Results: ACPI should work -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 495791] New: OBS project creation request -- wicd
by bugzilla_noreply＠novell.com 11 May '09

11 May '09

http://bugzilla.novell.com/show_bug.cgi?id=495791 Summary: OBS project creation request -- wicd Classification: openSUSE Product: openSUSE.org Version: unspecified Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: OBS Request AssignedTo: mrueckert(a)novell.com ReportedBy: compwiz18(a)gmail.com QAContact: adrian(a)novell.com Found By: --- The Wicd project (http://wicd.net) would like to use OBS to build packages for various distributions. We have the means to produce .deb packages, but we would like to also have the ability to produce RPM packages. I am posting here to request that a new project be created (named wicd) as per https://build.opensuse.org/project/new. To cite that page: "Please request a new project via bugzilla. You can also discuss the requested project setup on opensuse-buildservice(a)opensuse.org mailing list. Requesting new projects is only needed outside of your home:<login> namespace." Thank you for your time and the great service :) -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 5

[Bug 491414] New: disk space problem- du: fts_read failed: No such file or directory
by bugzilla_noreply＠novell.com 11 May '09

11 May '09

http://bugzilla.novell.com/show_bug.cgi?id=491414 Summary: disk space problem- du: fts_read failed: No such file or directory Classification: openSUSE Product: openSUSE 10.3 Version: Final Platform: x86-64 OS/Version: openSUSE 10.2 Status: NEW Severity: Major Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: kunal.sharma(a)efrontier.com QAContact: qa(a)suse.de Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.0.3) Gecko/2008101315 Ubuntu/8.10 (intrepid) Firefox/3.0.3 Hi , We are experiencing disk space issues wherein the file which occupies most disk space is /proc/kcore at 4.6GB. The file systems mounted are as Filesystem Size Used Avail Use% Mounted on /dev/sda3 12G 9.8G 1.5G 87% / udev 2.0G 80K 2.0G 1% /dev /dev/sda2 214G 60G 144G 30% /d0 nas-01.staging.efrontier.com:/vol/vol1 820G 339M 819G 1% /d0/cv/data/nas/share Now as I understand /proc/kcore is generated on fly and doesn't write to disk though it is of size of physical memory. The output of du on / gives - du: fts_read failed: No such file or directory - which I don't get on any directory under /. Is this a file system issue? I think the following outputs might be helpful release@damon:/> vmstat -am procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free inact active si so bi bo in cs us sy id wa 0 0 2101952 26396 558024 3218876 43 28 107 79 2 0 10 1 80 10 release@damon:/> cat /proc/slabinfo slabinfo - version: 2.1 # name <active_objs> <num_objs> <objsize> <objperslab> <pagesperslab> : tunables <limit> <batchcount> <sharedfactor> : slabdata <active_slabs> <num_slabs> <sharedavail> ip_conntrack_expect 0 0 136 28 1 : tunables 120 60 8 : slabdata 0 0 0 ip_conntrack 284 533 288 13 1 : tunables 54 27 8 : slabdata 41 41 0 nfs_direct_cache 0 0 128 30 1 : tunables 120 60 8 : slabdata 0 0 0 nfs_write_data 36 36 832 9 2 : tunables 54 27 8 : slabdata 4 4 0 nfs_read_data 32 35 768 5 1 : tunables 54 27 8 : slabdata 7 7 0 nfs_inode_cache 225 228 1000 4 1 : tunables 54 27 8 : slabdata 57 57 0 nfs_page 0 0 128 30 1 : tunables 120 60 8 : slabdata 0 0 0 rpc_buffers 8 8 2048 2 1 : tunables 24 12 8 : slabdata 4 4 0 rpc_tasks 8 10 384 10 1 : tunables 54 27 8 : slabdata 1 1 0 rpc_inode_cache 8 8 832 4 1 : tunables 54 27 8 : slabdata 2 2 0 fib6_nodes 5 59 64 59 1 : tunables 120 60 8 : slabdata 1 1 0 ip6_dst_cache 4 12 320 12 1 : tunables 54 27 8 : slabdata 1 1 0 ndisc_cache 1 15 256 15 1 : tunables 120 60 8 : slabdata 1 1 0 Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 5

[Bug 498289] New: Need more space to install rpms after booting with live cd[openSUSE-KDE4-LiveCD-Build0067-x86_64.iso] - how can I get more space
by bugzilla_noreply＠novell.com 08 May '09

08 May '09

http://bugzilla.novell.com/show_bug.cgi?id=498289 User doiggl(a)velocitynet.com.au added comment http://bugzilla.novell.com/show_bug.cgi?id=498289#c1 Summary: Need more space to install rpms after booting with live cd[openSUSE-KDE4-LiveCD-Build0067-x86_64.iso] - how can I get more space Classification: openSUSE Product: openSUSE 11.2 Version: Milestone 1 Platform: x86-64 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Live Medium AssignedTo: coolo(a)novell.com ReportedBy: doiggl(a)velocitynet.com.au QAContact: qa(a)suse.de Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.0.8) Gecko/2009032600 SUSE/3.0.8-1.3 Firefox/3.0.8 Booted with http://download.opensuse.org/distribution/11.2-Milestone1/iso/openSUSE-KDE4… # uname -a Linux linux 2.6.29-6-default #1 SMP 2009-03-24 15:38:18 +0100 x86_64 x86_64 x86_64 GNU/Linux linux:~ # df -m Filesystem 1M-blocks Used Available Use% Mounted on /dev/loop0 2602 2179 292 89% / udev 942 1 942 1% /dev linux:~ # Question: Is there a option to increase the space free on / so I can install a selection of rpms ?. Reproducible: Always Steps to Reproduce: 1. Boot from live cd 2. open terminal session , do a df -m 3. Not much space free, laptop has 2GB ram installed Actual Results: 292 blocks available. Expected Results: I wanted more than 292 blocks available so I could install a selection of rpms. It would be useful to have more available on / so I can install a selection of rpms. Maybe a boot parameter to make available more ram available to do this e.g 50% or 1G in this case or a smaller percentage in systems that have less ram. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 7

[Bug 494121] New: Ksnap Shot Screen Capture by Region And Delay Forces Desktop to Freeze as Totally Useless
by bugzilla_noreply＠novell.com 07 May '09

07 May '09

http://bugzilla.novell.com/show_bug.cgi?id=494121 Summary: Ksnap Shot Screen Capture by Region And Delay Forces Desktop to Freeze as Totally Useless Classification: openSUSE Product: openSUSE 11.1 Version: Final Platform: x86-64 OS/Version: openSUSE 11.1 Status: NEW Severity: Major Priority: P5 - None Component: KDE4 Applications AssignedTo: kde-maintainers(a)suse.de ReportedBy: alpha096(a)virginbroadband.com.au QAContact: qa(a)suse.de Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-GB; rv:1.9.0.8) Gecko/2009032600 SUSE/3.0.8-1.1.1 Firefox/3.0.8 The KDE screen Capture Application - Kshapshot can cause desktop to freeze completely on capture by Region with time delay set. If a user sets Ksnapshot a delay of say 10 seconds And selects by Region will successful in capturing the first shot. If the user attempts to take *second and subsequent* shot by region with time delay of 10 seconds and defines the area before the time delay value is reached and hits Enter to take the shot The desktop will be inaccessible and frozen and all keyboard functions denied - demanding a PC re-set to again gain access. The value of taking a shot by region and with time delay is *NOT* clear. The value of taking a shot by Full Screen with time delay is *VERY* clear Reproducible: Always Steps to Reproduce: 1. Open Ksnapshot 2.Set to Region 3.Set time day of say 10 seconds 4.Define the area and take *second and subsequent* shots before the time out value is reached 5.Desktop and Keyboard will *no longer be accessible* via *ANY* means and Unlimited Time Actual Results: Desktop and Keyboard will *no longer be accessible* via *ANY* means and Unlimited Time Expected Results: The snapshot by region *and* time delay function of Ksnapshot is questionable, however the desktop should not freeze and not be available under *any* circumstances. - Priority Adjusted due consequences of this bug - -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 9

[Bug 497719] New: problems with source repo
by bugzilla_noreply＠novell.com 07 May '09

07 May '09

http://bugzilla.novell.com/show_bug.cgi?id=497719 Summary: problems with source repo Classification: openSUSE Product: openSUSE.org Version: unspecified Platform: x86 OS/Version: openSUSE 11.1 Status: NEW Severity: Normal Priority: P5 - None Component: Download Infrastructure AssignedTo: poeml(a)novell.com ReportedBy: mittov(a)gmail.com QAContact: adrian(a)novell.com Found By: --- User-Agent: Mozilla/5.0 (compatible; Konqueror/4.2; Linux) KHTML/4.2.2 (like Gecko) SUSE Source repo is not in consistent state. 14 | repo-source | openSUSE-11.1-Source | Yes | Yes | http://download.opensuse.org/source/distribution/11.1/repo/oss/ # zypper ref repo-source Digest verification failed for packages.DU.gz. Expected c2c47b2bea12224005074a4a1dff2abb66ec28f0, found 0e90c879133dc4ac7b63acd021c0969cc24d00e6. Continue? [yes/NO]: $ wget http://download.opensuse.org/source/distribution/11.1/repo/oss/content $ wget http://download.opensuse.org/source/distribution/11.1/repo/oss/suse/setup/d… $ sha1sum packages.DU.gz 0e90c879133dc4ac7b63acd021c0969cc24d00e6 packages.DU.gz $ grep packages.DU.gz content META SHA1 c2c47b2bea12224005074a4a1dff2abb66ec28f0 packages.DU.gz Reproducible: Always Steps to Reproduce: 1. # zypper ar http://download.opensuse.org/source/distribution/11.1/repo/oss/ repo-source 2. # zypper ref Expected Results: Normal refresh of metadata. Mirror list: Found 1 mirror in other parts of the world: http://ftp.hosteurope.de/mirror/ftp.opensuse.org/source/distribution/11.1/r… Found 1 mirror in other parts of the world: http://ftp.hosteurope.de/mirror/ftp.opensuse.org/source/distribution/11.1/r… (de, prio 100) -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 6