April 2009 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 494199] New: in initrd, either udev cannot load aic94xx-seq.fw or driver can't tell that it is loaded
by bugzilla_noreply＠novell.com 02 Jul '09

02 Jul '09

http://bugzilla.novell.com/show_bug.cgi?id=494199 Summary: in initrd, either udev cannot load aic94xx-seq.fw or driver can't tell that it is loaded Classification: openSUSE Product: openSUSE 11.2 Version: Factory Platform: x86-64 OS/Version: openSUSE 11.1 Status: NEW Severity: Critical Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: harbaugh(a)ncifcrf.gov QAContact: qa(a)suse.de Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686 (x86_64); en-US; rv:1.9.0.8) Gecko/2009032608 Firefox/3.0.8 installed opensuse factory without incident to adaptec aic-9410 controller requiring /lib/firmware/aic94xx-seq.fw file. upon rebooting newly installed system could not find root drive. while in initrd shell reloaded aic94xx module which produced the following output on the console: ... udevd[164]: seq 808 forked, pid [806], 'add' 'firmware', 0 seconds old udevd-event[806]: seq 808 exit with 0 udevd[164]: seq 808 cleanup, pid [806], status 0, 0 seconds old aic94xx: Failed to load sequencer firmware file aic94xx-seq.fw, error -2 aic94xx: couldn't init seqs for 0000:04:02.0 aic94xx: couldn't init the chip aic94xx 0000:04:02.0: PCI INT A disabled aic94xx: probe of 0000:04:02.0 failed with error -2 udevd[164]: seq 809 queued, 'remove' 'firmware' udevd[164]: seq 809 forked, pid [807], 'remove' 'firmware', 0 seconds old udevd-event[807]: seq 809 exit with 0 ... /lib/firmware/aic94xx-seq.fw is present in the initrd Reproducible: Always Steps to Reproduce: 1.Install opensuse factory to disk on internal adaptec aic-9410 controller 2.reboot on to newly installed disk 3. Actual Results: new system could not find root disk Expected Results: system should detect root disk. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 8

[Bug 494435] New: wlan often does not work after s2disk
by bugzilla_noreply＠novell.com 01 Jul '09

01 Jul '09

http://bugzilla.novell.com/show_bug.cgi?id=494435 User s.assmann(a)gmx.de added comment http://bugzilla.novell.com/show_bug.cgi?id=494435#c1 Summary: wlan often does not work after s2disk Classification: openSUSE Product: openSUSE 11.1 Version: Final Platform: i386 OS/Version: Linux Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: s.assmann(a)gmx.de QAContact: qa(a)suse.de Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; de; rv:1.9.0.7) Gecko/2009022800 SUSE/3.0.7-1.1.6 Firefox/3.0.7 After s2disk the wireless of the eeepc 1000he often does not work anymore. It can't reconnect to the previously associated AP. Even manually re-selecting the wlan from KnetworkManager does not work. Workaround: ifconfig wlan0 down; ifconfig wlan0 up and network works fine again. lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GME Express Memory Controller Hub [8086:27ac] (rev 03) 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GME Express Integrated Graphics Controller [8086:27ae] (rev 03) 00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03) 00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 02) 00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 02) 00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 02) 00:1c.3 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 [8086:27d6] (rev 02) 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 02) 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 02) 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 02) 00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 02) 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 02) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02) 00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 02) 01:00.0 Network controller [0280]: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) [168c:002a] (rev 01) 03:00.0 Ethernet controller [0200]: Attansic Technology Corp. L1 Gigabit Ethernet Adapter [1969:1026] (rev b0) Reproducible: Sometimes Steps to Reproduce: 1. s2disk 2. resume 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 12

[Bug 492364] New: improvements to hwinfo (avoiding "unknown", etc.)
by bugzilla_noreply＠novell.com 29 Jun '09

29 Jun '09

http://bugzilla.novell.com/show_bug.cgi?id=492364 User Ulrich.Windl(a)rz.uni-regensburg.de added comment http://bugzilla.novell.com/show_bug.cgi?id=492364#c7 Summary: improvements to hwinfo (avoiding "unknown", etc.) Classification: openSUSE Product: openSUSE 11.1 Version: Final Platform: i686 OS/Version: openSUSE 11.1 Status: NEW Severity: Enhancement Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: Ulrich.Windl(a)rz.uni-regensburg.de QAContact: qa(a)suse.de Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.8.1.19) Gecko/20081213 SUSE/1.1.14-1.1 SeaMonkey/1.1.14 Here are some proposals to make the output of "hwinfo" more usable, based on the output of hwinfo from the rescue system of 11.1 on a new machine. Reproducible: Always Steps to Reproduce: 1. Examine the output of hwinfo Actual Results: Several "unknown" components are reported Expected Results: hwinfo could know a little more about new components. Many devices have an "unknown" hardware class: FPU, DMA controller (8237), PIC (8259), Timer (8254), Keyboard controller, PS/2 Controller, Main Memory, SMBus, Multimedia controller, Serial controller (16550) A disabled L3 Chache shows many unknown subitems: Cache Info: #7 Designation: "L3-Cache" Level: L3 State: Disabled Mode: 0x03 (Unknown) Location: 0x00 (Internal, Not Socketed) ECC: 0x02 (Unknown) Type: 0x02 (Unknown) Associativity: 0x02 (Unknown) Supported SRAM Types: 0x0002 (Unknown) Current SRAM Type: 0x0002 (Unknown) Many devices are reported with "active=unknown", even the CPUs! For USB hubs it would be very useful to report the number of ports for the hub, because computers are good in counting. There is a "usb.num_ports = 6 (0x6)" in debug output, but not in final output. ("lsusb" without "-v" also does not report the number of ports per hub) The kernel also reports the port count: <6>hub 7-0:1.0: USB hub found <6>hub 7-0:1.0: 2 ports detected <6>hub 8-0:1.0: USB hub found <6>hub 8-0:1.0: 6 ports detected Finally, this may be an issue of the rescue system only: <4>Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1

[Bug 496196] New: mysql packages broken in repositories/server:/database/openSUSE_11.0
by bugzilla_noreply＠novell.com 26 Jun '09

26 Jun '09

http://bugzilla.novell.com/show_bug.cgi?id=496196 Summary: mysql packages broken in repositories/server:/database/openSUSE_11.0 Classification: openSUSE Product: openSUSE 11.0 Version: Final Platform: x86-64 OS/Version: openSUSE 11.0 Status: NEW Severity: Major Priority: P5 - None Component: Maintenance AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: drankinatty(a)suddenlinkmail.com QAContact: qa(a)suse.de Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.0.8) Gecko/2009032600 SUSE/3.0.8-1.1 Firefox/3.0.8 After update from buildservice repositories/server:/database/openSUSE_11.0, mysql was broken. Additionally, there was no more log file in /var/log. After finding the log file in /var/lib/mysql, the following was shown for each mysql start attempt subsequent to the update: 90410 3:48:17 InnoDB: Started; log sequence number 0 43655 090410 3:48:17 [ERROR] /usr/sbin/mysqld: unknown option '--skip-federated' 090410 3:48:17 [ERROR] Aborting 090410 3:48:17 InnoDB: Starting shutdown... 090410 3:48:21 InnoDB: Shutdown completed; log sequence number 0 43655 090410 3:48:21 [Warning] Forcing shutdown of 1 plugins 090410 3:48:21 [Note] /usr/sbin/mysqld: Shutdown complete Looking at the installed mysql packages, something is definitely out of whack: [02:55 alchemy:/home/david] # rpm -qa | grep mysql libgda-3_0-mysql-3.1.2-42.1 libmysqlclient15-5.0.67-49.1 libmysqlclient16-5.1.33-26.1 libmysqlclient_r15-5.0.67-49.1 libmysqlclient_r16-5.1.33-26.1 mysql-5.1.33-26.1 mysql-client-5.1.33-26.1 The problem is with the dependencies for the following packages. mysql-administrator-5.0r12-195.1 mysql-gui-tools-5.0r12-195.1 mysql-query-browser-5.0r12-195.1 mysql-workbench-5.0r12-195.1 Update of these packages to the version 5.0r14 pulls in libmysqlclient_r16-5.1.33-26.1 and libmysqlclient16-5.1.33-26.1. At present, libmysqlclient15-5.0.67-49.1 and libmysqlclient_r15-5.0.67-49.1 are left installed by the updater. This seems to be causing whole bloody mess... Other users on the openSuSE list have reported: "Yes. It's broken. mysql.sock was moved from /var/lib/mysql to /var/run. mysqldump is hosed," -- and -- "Does anyone know a way to restore the mysql server access. It seems to be broken after the last updates." I'm sure it is just the few new non-conforming packages and probably just a simple problem with the .spec file used to build the rpms. If I can provide any additional information, just let me know. Thanks. Reproducible: Always Steps to Reproduce: 1. Update mysql and mysql-gui-toos from repositories/server:/database/openSUSE_11.0 2. Try to start mysql -- BSOD (not quite, but you get the picture) 3. Actual Results: See above Expected Results: mysql continues to start and run after update and the log files should stay where they have always been in /var/log so users don't have to hunt all over their systems for hidden or atavistic log files. Perhaps the maintainer can pull the packages until they are fixed so others are not bitten by this... -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 15

[Bug 496940] New: seamonkey 1.1.16 has incorrect agent string
by bugzilla_noreply＠novell.com 25 Jun '09

25 Jun '09

http://bugzilla.novell.com/show_bug.cgi?id=496940 Summary: seamonkey 1.1.16 has incorrect agent string Classification: openSUSE Product: openSUSE 11.0 Version: Final Platform: x86-64 OS/Version: openSUSE 11.0 Status: NEW Severity: Minor Priority: P5 - None Component: Firefox AssignedTo: bnc-team-mozilla(a)forge.provo.novell.com ReportedBy: greg.riedesel(a)wwu.edu QAContact: qa(a)suse.de Found By: --- Created an attachment (id=287199) --> (http://bugzilla.novell.com/attachment.cgi?id=287199) Screencap of the incorrect agent string. User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.8.1.19) Gecko/20081213 SUSE/1.1.15-0.1 SeaMonkey/1.1.14 Mnenhy/0.7.6.0 The agent string for Seamonkey is reporting as: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.8.1.19) Gecko/20081213 SUSE/1.1.15-0.1 SeaMonkey/1.1.14 Mnenhy/0.7.6.0 Yet the "About" screen shows a version of 1.1.16. Checking the web-logs of an apache server verifies the incorrect agent string in use. This also happened with Seamonkey 1.1.15 (reported string was also 1.1.14), but I didn't report it. Reproducible: Always Steps to Reproduce: 1. Go to Help 2. Select "About SeaMonkey" 3. View agent string under the big blue "SeaMonkey 1.1.16" -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 5

[Bug 493169] New: Cannot connect to a WPA-Enterprise network by bare wpa_supplicant
by bugzilla_noreply＠novell.com 25 Jun '09

25 Jun '09

http://bugzilla.novell.com/show_bug.cgi?id=493169 Summary: Cannot connect to a WPA-Enterprise network by bare wpa_supplicant Classification: openSUSE Product: openSUSE 11.1 Version: Final Platform: x86-64 OS/Version: openSUSE 11.1 Status: NEW Severity: Major Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: nice(a)titanic.nyme.hu QAContact: qa(a)suse.de Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; hu-HU; rv:1.9.0.7) Gecko/2009022800 SUSE/3.0.7-1.1.6 Firefox/3.0.7 I've tried to connect to a WPA-Enterprise network by bare wpa_supplicant. At first I stopped NetworkManager and killed the wpa_supplicant and modemmanager started by it. I created the following config (by wpa_gui): milleniumfalcon:~ # cat /etc/wpa_supplicant.conf ctrl_interface=/var/run/wpa_supplicant ctrl_interface_group=wheel update_config=1 network={ ssid="NYME1" proto=RSN key_mgmt=WPA-EAP pairwise=CCMP eap=MSCHAPV2 identity="nice" password="*********" ca_cert="/home/tamas/Documents/CA/demoCA/certs/nyme.pem" id_str="" } The I started wpa_gui and wpa_supplicant, which was unable to complete the WPA connection, despite the fact that I intentionally instructed it via wpa_gui. It was able to associate, even the wpa authentication was successful, but it always disconnected, just to start again. It sometimes stuck in the associated state, sometimes in the four way handshake state, but always disconnect before total completion. See the output of wpa_supplicant: milleniumfalcon:~ # wpa_supplicant -iwlan0 -Dwext -c/etc/wpa_supplicant.conf CTRL-EVENT-SCAN-RESULTS CTRL-EVENT-SCAN-RESULTS Trying to associate with 00:1d:70:27:6d:a2 (SSID='NYME1' freq=5220 MHz) Associated with 00:1d:70:27:6d:a2 CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys Associated with 00:1d:70:27:6d:a2 CTRL-EVENT-EAP-STARTED EAP authentication started CTRL-EVENT-EAP-METHOD EAP vendor 0 method 26 (MSCHAPV2) selected EAP-MSCHAPV2: Authentication succeeded CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys Associated with 00:1d:70:27:6d:a2 CTRL-EVENT-EAP-STARTED EAP authentication started CTRL-EVENT-EAP-METHOD EAP vendor 0 method 26 (MSCHAPV2) selected EAP-MSCHAPV2: Authentication succeeded CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys Associated with 00:1d:70:27:6d:a2 CTRL-EVENT-EAP-STARTED EAP authentication started CTRL-EVENT-EAP-METHOD EAP vendor 0 method 26 (MSCHAPV2) selected EAP-MSCHAPV2: Authentication succeeded CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys Associated with 00:1d:70:27:6d:a2 CTRL-EVENT-EAP-STARTED EAP authentication started CTRL-EVENT-EAP-METHOD EAP vendor 0 method 26 (MSCHAPV2) selected EAP-MSCHAPV2: Authentication succeeded CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys Associated with 00:1d:70:27:6d:a2 CTRL-EVENT-EAP-STARTED EAP authentication started CTRL-EVENT-EAP-METHOD EAP vendor 0 method 26 (MSCHAPV2) selected EAP-MSCHAPV2: Authentication succeeded CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys Associated with 00:1d:70:27:6d:a2 CTRL-EVENT-EAP-STARTED EAP authentication started CTRL-EVENT-EAP-METHOD EAP vendor 0 method 26 (MSCHAPV2) selected EAP-MSCHAPV2: Authentication succeeded CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys Associated with 00:1d:70:27:6d:a2 CTRL-EVENT-EAP-STARTED EAP authentication started CTRL-EVENT-EAP-METHOD EAP vendor 0 method 26 (MSCHAPV2) selected EAP-MSCHAPV2: Authentication succeeded CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys Associated with 00:1d:70:27:6d:a2 CTRL-EVENT-EAP-STARTED EAP authentication started CTRL-EVENT-SCAN-RESULTS CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys Associated with 00:1d:70:27:6d:a2 CTRL-EVENT-EAP-STARTED EAP authentication started CTRL-EVENT-EAP-METHOD EAP vendor 0 method 26 (MSCHAPV2) selected EAP-MSCHAPV2: Authentication succeeded CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys Associated with 00:1d:70:27:6d:a2 CTRL-EVENT-EAP-STARTED EAP authentication started CTRL-EVENT-EAP-METHOD EAP vendor 0 method 26 (MSCHAPV2) selected EAP-MSCHAPV2: Authentication succeeded CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys Associated with 00:1d:70:27:6d:a2 CTRL-EVENT-EAP-STARTED EAP authentication started CTRL-EVENT-EAP-METHOD EAP vendor 0 method 26 (MSCHAPV2) selected EAP-MSCHAPV2: Authentication succeeded CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys Associated with 00:1d:70:27:6d:a2 CTRL-EVENT-EAP-STARTED EAP authentication started CTRL-EVENT-EAP-METHOD EAP vendor 0 method 26 (MSCHAPV2) selected EAP-MSCHAPV2: Authentication succeeded CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys Associated with 00:1d:70:27:6d:a2 CTRL-EVENT-EAP-STARTED EAP authentication started CTRL-EVENT-EAP-METHOD EAP vendor 0 method 26 (MSCHAPV2) selected EAP-MSCHAPV2: Authentication succeeded CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys Associated with 00:1d:70:27:6d:a2 CTRL-EVENT-EAP-STARTED EAP authentication started CTRL-EVENT-SCAN-RESULTS CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys Associated with 00:1d:70:27:6d:a2 CTRL-EVENT-EAP-STARTED EAP authentication started CTRL-EVENT-EAP-METHOD EAP vendor 0 method 26 (MSCHAPV2) selected EAP-MSCHAPV2: Authentication succeeded CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys Associated with 00:1d:70:27:6d:a2 CTRL-EVENT-EAP-STARTED EAP authentication started CTRL-EVENT-EAP-METHOD EAP vendor 0 method 26 (MSCHAPV2) selected EAP-MSCHAPV2: Authentication succeeded CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys Associated with 00:1d:70:27:6d:a2 CTRL-EVENT-EAP-STARTED EAP authentication started CTRL-EVENT-EAP-METHOD EAP vendor 0 method 26 (MSCHAPV2) selected EAP-MSCHAPV2: Authentication succeeded CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys Associated with 00:1d:70:27:6d:a2 CTRL-EVENT-EAP-STARTED EAP authentication started CTRL-EVENT-EAP-METHOD EAP vendor 0 method 26 (MSCHAPV2) selected EAP-MSCHAPV2: Authentication succeeded CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys Associated with 00:1d:70:27:6d:a2 CTRL-EVENT-EAP-STARTED EAP authentication started CTRL-EVENT-SCAN-RESULTS CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys Associated with 00:1d:70:27:6d:a2 CTRL-EVENT-EAP-STARTED EAP authentication started ^CCTRL-EVENT-TERMINATING - signal 2 received Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 12

[Bug 498192] New: Xconsole is launched after log in
by bugzilla_noreply＠novell.com 24 Jun '09

24 Jun '09

http://bugzilla.novell.com/show_bug.cgi?id=498192 Summary: Xconsole is launched after log in Classification: openSUSE Product: openSUSE 11.2 Version: Milestone 1 Platform: x86 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: KDE4 Workspace AssignedTo: kde-maintainers(a)suse.de ReportedBy: rastislav.krupansky(a)gmail.com QAContact: qa(a)suse.de Found By: --- Created an attachment (id=288151) --> (http://bugzilla.novell.com/attachment.cgi?id=288151) snapshot User-Agent: Mozilla/5.0 (X11; U; Linux i686; sk; rv:1.9.0.8) Gecko/2009032600 SUSE/3.0.8-1.3 Firefox/3.0.8 KDE 4.2.2 "release 2", clear installation from DVD. On the attached snapshot you can see, that xconsole starts after log in. KDE LiveCD installation does not have this issue. Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 7

[Bug 492745] New: promo DVD offers to enable image installation
by bugzilla_noreply＠novell.com 24 Jun '09

24 Jun '09

http://bugzilla.novell.com/show_bug.cgi?id=492745 Summary: promo DVD offers to enable image installation Classification: openSUSE Product: openSUSE 11.1 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Minor Priority: P5 - None Component: Installation AssignedTo: locilka(a)novell.com ReportedBy: mvidner(a)novell.com QAContact: jsrain(a)novell.com Found By: Development Created an attachment (id=284418) --> (http://bugzilla.novell.com/attachment.cgi?id=284418) y2logs.tgz In the installation summary of the 11.1 promo DVD (installable + live KDE + Live GNOME), it says "Image installation is disabled (*enable*)". I suppose that there are no images because of space constraints on the DVD. It should not offer to enable it and instead say something like "No images found" or perhaps omit the info entirely. y2logs are attached. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 492354] New: There should be a security update for seamonkey-1.1.14-1.1
by bugzilla_noreply＠novell.com 24 Jun '09

24 Jun '09

http://bugzilla.novell.com/show_bug.cgi?id=492354 Summary: There should be a security update for seamonkey-1.1.14-1.1 Classification: openSUSE Product: openSUSE 11.1 Version: Final Platform: i686 OS/Version: openSUSE 11.1 Status: NEW Severity: Normal Priority: P5 - None Component: X11 Applications AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: Ulrich.Windl(a)rz.uni-regensburg.de QAContact: qa(a)suse.de Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.8.1.19) Gecko/20081213 SUSE/1.1.14-1.1 SeaMonkey/1.1.14 Recently there was a security update for Mozilla Firefox (MozillaFirefox-3.0.7-1.1.6), but none for Mozilla Seamonkey. When connecting to http://www.seamonkey-project.org/start/ I get a warning, that there are security updates in the newer 1.15 version (http://download.mozilla.org/?product=seamonkey-1.1.15&os=linux&lang=en-US) Reproducible: Always Steps to Reproduce: 1. Expect an update for seamonkey Actual Results: No update available Expected Results: There should be a security update -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 11

[Bug 493978] New: perl unicode problem with OTRS pop3 support
by bugzilla_noreply＠novell.com 24 Jun '09

24 Jun '09

http://bugzilla.novell.com/show_bug.cgi?id=493978 Summary: perl unicode problem with OTRS pop3 support Classification: openSUSE Product: openSUSE 11.1 Version: Final Platform: All OS/Version: openSUSE 11.1 Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: listuser(a)peternixon.net QAContact: qa(a)suse.de Found By: --- Created an attachment (id=285208) --> (http://bugzilla.novell.com/attachment.cgi?id=285208) perl unicode patch User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.0.8) Gecko/2009032600 SUSE/3.0.8-1.1.1 Firefox/3.0.8 OTRS pop3 support chokes when sucking UNICODE mail from a POP3 (Exchange 2003) server with the following error: Wide character in syswrite at /usr/lib/perl5/5.10.0/Net/Cmd.pm line 232, <PRODUCT> line 4. See the following OTRS list discussion: http://lists.otrs.org/pipermail/otrs/2009-April/026146.html A small patch to perl Cmd.pm works around this problem. Patch attached. Patched perl packages are available in home:peternixon on OBS Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 6