March 2009 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 469367] New: Reversion to origonal screen resolution does not work
by bugzilla_noreply＠novell.com 09 Mar '09

09 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=469367 Summary: Reversion to origonal screen resolution does not work Classification: openSUSE Product: openSUSE 11.1 Version: Final Platform: x86-64 OS/Version: openSUSE 11.1 Status: NEW Severity: Major Priority: P5 - None Component: KDE4 Workspace AssignedTo: kde-maintainers(a)suse.de ReportedBy: nice(a)titanic.nyme.hu QAContact: qa(a)suse.de Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; hu-HU; rv:1.9.0.5) Gecko/2008121300 SUSE/3.0.5-1.1 Firefox/3.0.5 I tried to change my screen resolution in the display section of KDE4 system settings. The results so far: After changing the resolution, a dialog - with a descreasing progress bar - appears, which says that either by waitingfor 15 seconds or by clicking the button revert to the old settings, I can switch back to the original settings. However, actually neither waiting for 15 seconds nor switching back manually has any effect. The screen resolution will alway remain at the new values. I have to switch back manually later. In addition to this neither rotation nor reflection setting have any effect, in spite of the fact tha I can change them by the xrandr command line utility. Some system information: milleniumfalcon:~ # hwinfo --gfxcard 10: PCI 02.0: 0300 VGA compatible controller (VGA) [Created at pci.318] UDI: /org/freedesktop/Hal/devices/pci_8086_27a2 Unique ID: _Znp.tgYFl3n12UC SysFS ID: /devices/pci0000:00/0000:00:02.0 SysFS BusID: 0000:00:02.0 Hardware Class: graphics card Model: "Intel 945 GM" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27a2 "945 GM" SubVendor: pci 0x103c "Hewlett-Packard Company" SubDevice: pci 0x30aa Revision: 0x03 Memory Range: 0xe8400000-0xe847ffff (rw,non-prefetchable) I/O Ports: 0x6000-0x6007 (rw) Memory Range: 0xd0000000-0xdfffffff (rw,prefetchable) Memory Range: 0xe8480000-0xe84bffff (rw,non-prefetchable) IRQ: 16 (399067 events) I/O Ports: 0x3c0-0x3df (rw) Module Alias: "pci:v00008086d000027A2sv0000103Csd000030AAbc03sc00i00" Driver Info #0: XFree86 v4 Server Module: intel Driver Info #1: XFree86 v4 Server Module: intel 3D Support: yes Extensions: dri Config Status: cfg=no, avail=yes, need=no, active=unknown 11: PCI 02.1: 0380 Display controller [Created at pci.318] UDI: /org/freedesktop/Hal/devices/pci_8086_27a6 Unique ID: ruGf.xMl75dQpuE3 SysFS ID: /devices/pci0000:00/0000:00:02.1 SysFS BusID: 0000:00:02.1 Hardware Class: graphics card Model: "Intel Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27a6 "Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller" SubVendor: pci 0x103c "Hewlett-Packard Company" SubDevice: pci 0x30aa Revision: 0x03 Memory Range: 0xe8500000-0xe857ffff (rw,non-prefetchable) Module Alias: "pci:v00008086d000027A6sv0000103Csd000030AAbc03sc80i00" Config Status: cfg=no, avail=yes, need=no, active=unknown Primary display adapter: #10 milleniumfalcon:~ # hwinfo --monitor 34: None 00.0: 10000 Monitor [Created at fb.71] Unique ID: rdCR.EY_qmtb9YY0 Hardware Class: monitor Model: "Generic Monitor" Vendor: "Generic" Device: "Monitor" Resolution: 1280x1024@77Hz Driver Info #0: Max. Resolution: 1280x1024 Vert. Sync Range: 50-90 Hz Hor. Sync Range: 31-82 kHz Config Status: cfg=new, avail=yes, need=no, active=unknown milleniumfalcon:~ # xrandr Screen 0: minimum 320 x 200, current 1400 x 1050, maximum 2048 x 1200 VGA disconnected (normal left inverted right x axis y axis) LVDS connected 1400x1050+0+0 (normal left inverted right x axis y axis) 304mm x 228mm 1400x1050 60.0*+ 60.0 60.0 58.9 1280x1024 60.0 1280x960 60.0 1024x768 60.0 60.0 58.8 800x600 60.3 56.2 640x480 59.9 TV disconnected (normal left inverted right x axis y axis) Reproducible: Always Steps to Reproduce: 1. Try to change the display settings in KDE4 Actual Results: It works only in a few aspects. Expected Results: It should be fully functional. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 458920] New: Look and feel when kde is starting
by bugzilla_noreply＠novell.com 09 Mar '09

09 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=458920 Summary: Look and feel when kde is starting Product: openSUSE 11.1 Version: Final Platform: x86-64 OS/Version: openSUSE 11.1 Status: NEW Severity: Normal Priority: P5 - None Component: X11 Applications AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: jpmartinlinux(a)free.fr QAContact: sndirsch(a)novell.com Found By: --- I have got a 24 screen in 1920x1200. The background of boot on X11 is too small. The black box is too small. JP -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 8

[Bug 458134] New: kdesu doesn't work any more for KDE applications
by bugzilla_noreply＠novell.com 09 Mar '09

09 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=458134 Summary: kdesu doesn't work any more for KDE applications Product: openSUSE 10.3 Version: Future/Later Platform: x86-64 OS/Version: openSUSE 10.3 Status: NEW Severity: Normal Priority: P5 - None Component: KDE AssignedTo: kde-maintainers(a)suse.de ReportedBy: gerhard.stengel(a)o2online.de QAContact: qa(a)suse.de Found By: Customer If I want to start a KDE application with kdesu, the root password is prompted as normal, but then nothing happens any more! However, the process seems to be started, but no window comes up. In the system monitor I can see that kdesu starts a "su" process, which starts kdesu_stub and then finally the kde application. NOTE: kdesu for non-KDE applications, i.e. wireshark, works fine! -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 444492] New: Boot delay, waiting for partition to appear.
by bugzilla_noreply＠novell.com 09 Mar '09

09 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=444492 User monkey9(a)iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c1 Summary: Boot delay, waiting for partition to appear. Product: openSUSE 11.1 Version: Factory Platform: 64bit OS/Version: SuSE Other Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: monkey9(a)iae.nl QAContact: qa(a)suse.de Found By: Beta-Customer Boot log for inspection. Inspecting /boot/System.map-2.6.27.5-1-default Cannot find map file. No module symbols loaded - kernel modules not enabled. Cannot build symbol table - disabling symbol lookups klogd 1.4.1, log source = ksyslog started. <6>Initializing cgroup subsys cpuset <6>Initializing cgroup subsys cpu <5>Linux version 2.6.27.5-1-default (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2008-11-08 04:59:08 +0100 <6>Command line: root=/dev/disk/by-id/scsi-SATA_HDS722516VLAT80_VN643ECDEW7U8F-part11 resume=/dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part9 splash=silent vga=0x355 <4>KERNEL supported cpus: <4> Intel GenuineIntel <4> AMD AuthenticAMD <4> Centaur CentaurHauls <6>BIOS-provided physical RAM map: <6> BIOS-e820: 0000000000000000 - 000000000009f400 (usable) <6> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) <6> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) <6> BIOS-e820: 0000000000100000 - 000000007fee0000 (usable) <6> BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS) <6> BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data) <6> BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved) <6> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) <6> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) <6>last_pfn = 0x7fee0 max_arch_pfn = 0x3ffffffff <6>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 <6>init_memory_mapping <7> 0000000000 - 007fe00000 page 2M <7> 007fe00000 - 007fee0000 page 4k <7>kernel direct mapping tables up to 7fee0000 @ 8000-c000 <6>last_map_addr: 7fee0000 end: 7fee0000 <6>RAMDISK: 37a12000 - 37fef121 <6>DMI 2.4 present. <4>ACPI: RSDP 000F7A30, 0014 (r0 Nvidia) <4>ACPI: RSDT 7FEE3040, 0038 (r1 Nvidia NVDAACPI 42302E31 NVDA 0) <4>ACPI: FACP 7FEE30C0, 0074 (r1 Nvidia NVDAACPI 42302E31 NVDA 0) <4>ACPI Warning (tbfadt-0442): Optional field "Pm2ControlBlock" has zero address or length: 0000000000000000/1 [20080609] <4>ACPI: DSDT 7FEE3180, 6395 (r1 NVIDIA NVDAACPI 1000 MSFT 100000E) <4>ACPI: FACS 7FEE0000, 0040 <4>ACPI: SSDT 7FEE9640, 01C4 (r1 PTLTD POWERNOW 1 LTP 1) <4>ACPI: _HPT 7FEE9880, 0038 (r1 Nvidia NVDAACPI 42302E31 NVDA 98) <4>ACPI: MCFG 7FEE9900, 003C (r1 Nvidia NVDAACPI 42302E31 NVDA 0) <4>ACPI: APIC 7FEE9580, 007C (r1 Nvidia NVDAACPI 42302E31 NVDA 0) <6>Scanning NUMA topology in Northbridge 24 <6>No NUMA configuration found <6>Faking a node at 0000000000000000-000000007fee0000 <6>Bootmem setup node 0 0000000000000000-000000007fee0000 <6> NODE_DATA [000000000000a000 - 000000000003dfff] <6> bootmap [000000000003e000 - 000000000004dfdf] pages 10 <6>(6 early reservations) ==> bootmem [0000000000 - 007fee0000] <6> #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] <6> #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] <6> #2 [0000200000 - 0001559e78] TEXT DATA BSS ==> [0000200000 - 0001559e78] <6> #3 [0037a12000 - 0037fef121] RAMDISK ==> [0037a12000 - 0037fef121] <6> #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] <6> #5 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] <6>found SMP MP-table at [ffff8800000f3a00] 000f3a00 <7> [ffffe20000000000-ffffe20001ffffff] PMD -> [ffff880001800000-ffff8800037fffff] on node 0 <4>Zone PFN ranges: <4> DMA 0x00000000 -> 0x00001000 <4> DMA32 0x00001000 -> 0x00100000 <4> Normal 0x00100000 -> 0x00100000 <4>Movable zone start PFN for each node <4>early_node_map[2] active PFN ranges <4> 0: 0x00000000 -> 0x0000009f <4> 0: 0x00000100 -> 0x0007fee0 <7>On node 0 totalpages: 523903 <7> DMA zone: 3831 pages, LIFO batch:0 <7> DMA32 zone: 511780 pages, LIFO batch:31 <6>Nvidia board detected. Ignoring ACPI timer override. <6>If you got timer trouble try acpi_use_timer_override <6>Detected use of extended apic ids on hypertransport bus <6>ACPI: PM-Timer IO Port: 0x1008 <7>ACPI: Local APIC address 0xfee00000 <6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) <6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) <6>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) <6>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) <6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) <6>IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl) <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) <7>ACPI: IRQ0 used by override. <7>ACPI: IRQ9 used by override. <7>ACPI: IRQ14 used by override. <7>ACPI: IRQ15 used by override. <6>Using ACPI (MADT) for SMP configuration information <6>SMP: Allowing 2 CPUs, 0 hotplug CPUs <6>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 <6>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 <6>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 <6>Allocating PCI resources starting at 80000000 (gap: 7ff00000:70100000) <6>PERCPU: Allocating 69664 bytes of per cpu data <7>NR_CPUS: 4096, nr_cpu_ids: 2, nr_node_ids 1 <4>Built 1 zonelists in Node order, mobility grouping on. Total pages: 515611 <4>Policy zone: DMA32 <5>Kernel command line: root=/dev/disk/by-id/scsi-SATA_HDS722516VLAT80_VN643ECDEW7U8F-part11 resume=/dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part9 splash=silent vga=0x355 <6>bootsplash: silent mode. <6>Initializing CPU#0 <4>PID hash table entries: 4096 (order: 12, 32768 bytes) <6>TSC: PIT calibration confirmed by PMTIMER. <6>TSC: using PIT calibration value <4>Detected 2009.225 MHz processor. <7>spurious 8259A interrupt: IRQ7. <4>Console: colour dummy device 80x25 <6>console [tty0] enabled <6>Checking aperture... <6>No AGP bridge found <6>Node 0: aperture @ 0 size 32 MB <6>Memory: 2036520k/2096000k available (2759k kernel code, 59092k reserved, 2703k data, 1548k init) <7>CPA: page pool initialized 1 of 1 pages preallocated <6>Calibrating delay loop (skipped), value calculated using timer frequency.. 4018.45 BogoMIPS (lpj=8036900) <4>kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved <6>Security Framework initialized <6>SELinux: Disabled at boot. <6>AppArmor: AppArmor initialized <6>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) <6>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) <4>Mount-cache hash table entries: 256 <6>Initializing cgroup subsys ns <6>Initializing cgroup subsys cpuacct <6>Initializing cgroup subsys memory <6>Initializing cgroup subsys devices <6>Initializing cgroup subsys freezer <6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) <6>CPU: L2 Cache: 256K (64 bytes/line) <6>CPU 0/0 -> Node 0 <7>tseg: 007ff00000 <6>CPU: Physical Processor ID: 0 <6>CPU: Processor Core ID: 0 <6>using C1E aware idle routine <6>ACPI: Core revision 20080609 <6>ACPI: Checking initramfs for custom DSDT <4>Parsing all Control Methods: <4>Table [DSDT](id 0001) - 1045 Objects with 97 Devices 320 Methods 41 Regions <4>Parsing all Control Methods: <4>Table [SSDT](id 0002) - 8 Objects with 0 Devices 0 Methods 0 Regions <4> tbxface-0596 [00] tb_load_namespace : ACPI Tables successfully acquired <4>evxfevnt-0091 [00] enable : Transition to ACPI mode successful <6>Setting APIC routing to flat <6>..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 <6>CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ stepping 02 <6>Using local APIC timer interrupts. <7>APIC timer calibration result 12557706 <6>Detected 12.557 MHz APIC timer. <6>Booting processor 1/1 ip 6000 <6>Initializing CPU#1 <6>Calibrating delay using timer specific routine.. 4018.49 BogoMIPS (lpj=8036984) <6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) <6>CPU: L2 Cache: 256K (64 bytes/line) <6>CPU 1/1 -> Node 0 <6>CPU: Physical Processor ID: 0 <6>CPU: Processor Core ID: 1 <6>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 <6>CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ stepping 02 <6>Brought up 2 CPUs <6>Total of 2 processors activated (8036.94 BogoMIPS). <7>CPU0 attaching sched-domain: <7> domain 0: span 0-1 level CPU <7> groups: 0 1 <7> domain 1: span 0-1 level NODE <7> groups: 0-1 <7>CPU1 attaching sched-domain: <7> domain 0: span 0-1 level CPU <7> groups: 1 0 <7> domain 1: span 0-1 level NODE <7> groups: 0-1 <6>net_namespace: 1936 bytes <6>Booting paravirtualized kernel on bare hardware <6>NET: Registered protocol family 16 <7>node 0 link 0: io port [9000, ffff] <6>TOM: 0000000080000000 aka 2048M <7>node 0 link 0: mmio [a0000, bffff] <7>node 0 link 0: mmio [80000000, efffffff] <7>node 0 link 0: mmio [f4000000, fe02ffff] <7>node 0 link 0: mmio [f0000000, f04fffff] <7>bus: [00,04] on node 0 link 0 <7>bus: 00 index 0 io port: [0, ffff] <7>bus: 00 index 1 mmio: [a0000, bffff] <7>bus: 00 index 2 mmio: [80000000, f3ffffff] <7>bus: 00 index 3 mmio: [f4000000, fcffffffff] <6>ACPI: bus type pci registered <5>PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 <5>PCI: MCFG area at f0000000 reserved in E820 <6>PCI: Using MMCONFIG at f0000000 - f3ffffff <6>PCI: Using configuration type 1 for base access <5>perfmon: version 2.82 <5>perfmon: CPU hotplug support enabled <4>evgpeblk-0957 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 <4>evgpeblk-0957 [00] ev_create_gpe_block : GPE 20 to 5F [_GPE] 8 regs on int 0x9 <7>ACPI: EC: Look up EC in DSDT <4>Completing Region/Field/Buffer/Package initialization:.............................................................................................................. <4>Initialized 36/41 Regions 9/9 Fields 39/39 Buffers 26/26 Packages (1062 nodes) <4>Initializing Device/Processor/Thermal objects by executing _INI methods:.. <4>Executed 2 _INI methods requiring 1 _STA executions (examined 102 objects) <4>evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 1 Runtime GPEs in this block <4>evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 0 Wake, Enabled 0 Runtime GPEs in this block <6>ACPI: Interpreter enabled <6>ACPI: (supports S0 S1 S3 S4 S5) <6>ACPI: Using IOAPIC for interrupt routing <6>ACPI: PCI Root Bridge [PCI0] (0000:00) <7>PCI: 0000:00:01.1 reg 10 io port: [fc00, fc3f] <7>PCI: 0000:00:01.1 reg 20 io port: [1c00, 1c3f] <7>PCI: 0000:00:01.1 reg 24 io port: [f400, f43f] <6>pci 0000:00:01.1: PME# supported from D3hot D3cold <6>pci 0000:00:01.1: PME# disabled <7>PCI: 0000:00:02.0 reg 10 32bit mmio: [fe02f000, fe02ffff] <7>pci 0000:00:02.0: supports D1 <7>pci 0000:00:02.0: supports D2 <6>pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold <6>pci 0000:00:02.0: PME# disabled <7>PCI: 0000:00:02.1 reg 10 32bit mmio: [fe02e000, fe02e0ff] <7>pci 0000:00:02.1: supports D1 <7>pci 0000:00:02.1: supports D2 <6>pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold <6>pci 0000:00:02.1: PME# disabled <7>PCI: 0000:00:05.0 reg 10 32bit mmio: [fe028000, fe02bfff] <6>pci 0000:00:05.0: PME# supported from D3hot D3cold <6>pci 0000:00:05.0: PME# disabled <7>PCI: 0000:00:06.0 reg 20 io port: [f000, f00f] <7>PCI: 0000:00:07.0 reg 10 32bit mmio: [fe02d000, fe02dfff] <7>PCI: 0000:00:07.0 reg 14 io port: [ec00, ec07] <7>pci 0000:00:07.0: supports D1 <7>pci 0000:00:07.0: supports D2 <6>pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold <6>pci 0000:00:07.0: PME# disabled <7>PCI: 0000:00:08.0 reg 10 io port: [9f0, 9f7] <7>PCI: 0000:00:08.0 reg 14 io port: [bf0, bf3] <7>PCI: 0000:00:08.0 reg 18 io port: [970, 977] <7>PCI: 0000:00:08.0 reg 1c io port: [b70, b73] <7>PCI: 0000:00:08.0 reg 20 io port: [d800, d80f] <7>PCI: 0000:00:08.0 reg 24 32bit mmio: [fe02c000, fe02cfff] <6>pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold <6>pci 0000:00:09.0: PME# disabled <6>pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold <6>pci 0000:00:0b.0: PME# disabled <6>pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold <6>pci 0000:00:0c.0: PME# disabled <6>pci 0000:00:04.0: transparent bridge <7>PCI: bridge 0000:00:04.0 io port: [c000, cfff] <7>PCI: bridge 0000:00:04.0 32bit mmio: [fdd00000, fddfffff] <7>PCI: bridge 0000:00:04.0 32bit mmio pref: [fde00000, fdefffff] <7>PCI: 0000:02:00.0 reg 10 64bit mmio: [e0000000, efffffff] <7>PCI: 0000:02:00.0 reg 18 64bit mmio: [fdcf0000, fdcfffff] <7>PCI: 0000:02:00.0 reg 20 io port: [bc00, bcff] <7>PCI: 0000:02:00.0 reg 30 32bit mmio: [0, 1ffff] <7>pci 0000:02:00.0: supports D1 <7>pci 0000:02:00.0: supports D2 <7>PCI: 0000:02:00.1 reg 10 64bit mmio: [fdce0000, fdceffff] <7>pci 0000:02:00.1: supports D1 <7>pci 0000:02:00.1: supports D2 <4>Pre-1.1 PCIe device detected, disable ASPM for 0000:00:09.0. It can be enabled forcedly with 'pcie_aspm=force' <7>PCI: bridge 0000:00:09.0 io port: [b000, bfff] <7>PCI: bridge 0000:00:09.0 32bit mmio: [fdc00000, fdcfffff] <7>PCI: bridge 0000:00:09.0 64bit mmio pref: [e0000000, efffffff] <7>PCI: bridge 0000:00:0b.0 io port: [a000, afff] <7>PCI: bridge 0000:00:0b.0 32bit mmio: [fdb00000, fdbfffff] <7>PCI: bridge 0000:00:0b.0 64bit mmio pref: [fda00000, fdafffff] <7>PCI: bridge 0000:00:0c.0 io port: [9000, 9fff] <7>PCI: bridge 0000:00:0c.0 32bit mmio: [fd900000, fd9fffff] <7>PCI: bridge 0000:00:0c.0 64bit mmio pref: [fd800000, fd8fffff] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] <6>ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. <6>ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. <6>ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. <6>ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. <6>ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. <6>ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. <6>ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. <6>ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 *10 11 14 15) <6>ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 11 14 15) *0, disabled. <6>ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. <6>ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15) <6>ACPI: PCI Interrupt Link [LMAC] (IRQs 5 *7 9 10 11 14 15) <6>ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15) <6>ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 *11 14 15) <6>ACPI: PCI Interrupt Link [LSMB] (IRQs 5 *7 9 10 11 14 15) <6>ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15) <6>ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. <6>ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15) <6>ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 15) *0, disabled. <6>ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. <6>ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. <6>ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. <6>ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. <6>ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. <6>ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. <6>ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. <6>ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0 <6>ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0, disabled. <6>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 <6>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 <6>ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0 <6>ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 <6>ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 <6>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 <6>ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. <6>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. <6>ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 <6>ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. <6>Linux Plug and Play Support v0.97 (c) Adam Belay <6>pnp: PnP ACPI init <6>ACPI: bus type pnp registered <6>pnp: PnP ACPI: found 13 devices <6>ACPI: ACPI bus type pnp unregistered <6>PCI: Using ACPI for IRQ routing <6>AppArmor: AppArmor Filesystem Enabled <4>ACPI: RTC can wake from S4 <6>system 00:01: ioport range 0x1000-0x107f has been reserved <6>system 00:01: ioport range 0x1080-0x10ff has been reserved <6>system 00:01: ioport range 0x1400-0x147f has been reserved <6>system 00:01: ioport range 0x1480-0x14ff has been reserved <6>system 00:01: ioport range 0x1800-0x187f has been reserved <6>system 00:01: ioport range 0x1880-0x18ff has been reserved <6>system 00:01: ioport range 0x2000-0x207f has been reserved <6>system 00:01: ioport range 0x2080-0x20ff has been reserved <6>system 00:01: iomem range 0xfec80000-0xfecbffff could not be reserved <6>system 00:01: iomem range 0xfefe0000-0xfefe01ff could not be reserved <6>system 00:01: iomem range 0xfefe1000-0xfefe10ff could not be reserved <6>system 00:02: ioport range 0x4d0-0x4d1 has been reserved <6>system 00:02: ioport range 0x800-0x87f has been reserved <6>system 00:02: ioport range 0x290-0x297 has been reserved <6>system 00:0b: iomem range 0xf0000000-0xf3ffffff could not be reserved <6>system 00:0c: iomem range 0xf0000-0xfffff could not be reserved <6>system 00:0c: iomem range 0xfeff0000-0xfeff00ff could not be reserved <6>system 00:0c: iomem range 0x7fee0000-0x7fefffff could not be reserved <6>system 00:0c: iomem range 0xffff0000-0xffffffff could not be reserved <6>system 00:0c: iomem range 0x0-0x9ffff could not be reserved <6>system 00:0c: iomem range 0x100000-0x7fedffff could not be reserved <6>system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved <6>system 00:0c: iomem range 0xfee00000-0xfeefffff could not be reserved <6>system 00:0c: iomem range 0xfefff000-0xfeffffff could not be reserved <6>system 00:0c: iomem range 0xfff80000-0xfff80fff could not be reserved <6>system 00:0c: iomem range 0xfff90000-0xfffbffff could not be reserved <6>system 00:0c: iomem range 0xfffed000-0xfffeffff could not be reserved <6>pci 0000:00:04.0: PCI bridge, secondary bus 0000:01 <6>pci 0000:00:04.0: IO window: 0xc000-0xcfff <6>pci 0000:00:04.0: MEM window: 0xfdd00000-0xfddfffff <6>pci 0000:00:04.0: PREFETCH window: 0x000000fde00000-0x000000fdefffff <6>pci 0000:00:09.0: PCI bridge, secondary bus 0000:02 <6>pci 0000:00:09.0: IO window: 0xb000-0xbfff <6>pci 0000:00:09.0: MEM window: 0xfdc00000-0xfdcfffff <6>pci 0000:00:09.0: PREFETCH window: 0x000000e0000000-0x000000efffffff <6>pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03 <6>pci 0000:00:0b.0: IO window: 0xa000-0xafff <6>pci 0000:00:0b.0: MEM window: 0xfdb00000-0xfdbfffff <6>pci 0000:00:0b.0: PREFETCH window: 0x000000fda00000-0x000000fdafffff <6>pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04 <6>pci 0000:00:0c.0: IO window: 0x9000-0x9fff <6>pci 0000:00:0c.0: MEM window: 0xfd900000-0xfd9fffff <6>pci 0000:00:0c.0: PREFETCH window: 0x000000fd800000-0x000000fd8fffff <7>pci 0000:00:04.0: setting latency timer to 64 <7>pci 0000:00:09.0: setting latency timer to 64 <7>pci 0000:00:0b.0: setting latency timer to 64 <7>pci 0000:00:0c.0: setting latency timer to 64 <6>bus: 00 index 0 io port: [0, ffff] <6>bus: 00 index 1 mmio: [0, ffffffffffffffff] <6>bus: 01 index 0 io port: [c000, cfff] <6>bus: 01 index 1 mmio: [fdd00000, fddfffff] <6>bus: 01 index 2 mmio: [fde00000, fdefffff] <6>bus: 01 index 3 io port: [0, ffff] <6>bus: 01 index 4 mmio: [0, ffffffffffffffff] <6>bus: 02 index 0 io port: [b000, bfff] <6>bus: 02 index 1 mmio: [fdc00000, fdcfffff] <6>bus: 02 index 2 mmio: [e0000000, efffffff] <6>bus: 02 index 3 mmio: [0, 0] <6>bus: 03 index 0 io port: [a000, afff] <6>bus: 03 index 1 mmio: [fdb00000, fdbfffff] <6>bus: 03 index 2 mmio: [fda00000, fdafffff] <6>bus: 03 index 3 mmio: [0, 0] <6>bus: 04 index 0 io port: [9000, 9fff] <6>bus: 04 index 1 mmio: [fd900000, fd9fffff] <6>bus: 04 index 2 mmio: [fd800000, fd8fffff] <6>bus: 04 index 3 mmio: [0, 0] <6>NET: Registered protocol family 2 <7>Switched to high resolution mode on CPU 0 <7>Switched to high resolution mode on CPU 1 <6>IP route cache hash table entries: 65536 (order: 7, 524288 bytes) <6>TCP established hash table entries: 262144 (order: 10, 4194304 bytes) <6>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) <6>TCP: Hash tables configured (established 262144 bind 65536) <6>TCP reno registered <6>NET: Registered protocol family 1 <6>Unpacking initramfs... done <6>Freeing initrd memory: 6004k freed <6>audit: initializing netlink socket (disabled) <5>type=2000 audit(1226563047.900:1): initialized <6>HugeTLB registered 2 MB page size, pre-allocated 0 pages <5>VFS: Disk quotas dquot_6.5.1 <4>Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>msgmni has been set to 997 <6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) <6>io scheduler noop registered <6>io scheduler anticipatory registered <6>io scheduler deadline registered <6>io scheduler cfq registered (default) <6>perfmon: added sampling format default <6>pci 0000:00:00.0: Enabling HT MSI Mapping <6>pci 0000:00:04.0: Enabling HT MSI Mapping <6>pci 0000:00:05.0: Enabling HT MSI Mapping <6>pci 0000:00:07.0: Enabling HT MSI Mapping <6>pci 0000:00:08.0: Enabling HT MSI Mapping <6>pci 0000:00:09.0: Enabling HT MSI Mapping <6>pci 0000:00:0b.0: Enabling HT MSI Mapping <6>pci 0000:00:0c.0: Enabling HT MSI Mapping <7>pci 0000:02:00.0: Boot video device <7>pcieport-driver 0000:00:09.0: setting latency timer to 64 <6>pcieport-driver 0000:00:09.0: found MSI capability <7>pci_express 0000:00:09.0:pcie00: allocate port service <7>pci_express 0000:00:09.0:pcie03: allocate port service <7>pcieport-driver 0000:00:0b.0: setting latency timer to 64 <6>pcieport-driver 0000:00:0b.0: found MSI capability <7>pci_express 0000:00:0b.0:pcie00: allocate port service <7>pci_express 0000:00:0b.0:pcie03: allocate port service <7>pcieport-driver 0000:00:0c.0: setting latency timer to 64 <6>pcieport-driver 0000:00:0c.0: found MSI capability <7>pci_express 0000:00:0c.0:pcie00: allocate port service <7>pci_express 0000:00:0c.0:pcie03: allocate port service <6>vesafb: framebuffer at 0xe0000000, mapped to 0xffffc20004980000, using 7776k, total 16384k <6>vesafb: mode is 1152x864x16, linelength=2304, pages=7 <6>vesafb: scrolling: redraw <6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 <6>bootsplash 3.1.6-2004/03/31: looking for picture... <6>bootsplash: silentjpeg size 153527 bytes <6>bootsplash: ...found (1152x864, 183387 bytes, v3). <4>Console: switching to colour frame buffer device 140x50 <6>fb0: VESA VGA frame buffer device <6>Non-volatile memory driver v1.2 <6>Linux agpgart interface v0.103 <6>Serial: 8250/16550 driver8 ports, IRQ sharing disabled <6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <6>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <6>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 <6>serio: i8042 KBD port at 0x60,0x64 irq 1 <6>serio: i8042 AUX port at 0x60,0x64 irq 12 <6>mice: PS/2 mouse device common for all mice <6>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 <6>cpuidle: using governor ladder <6>cpuidle: using governor menu <6>TCP cubic registered <4>registered taskstats version 1 <6>Freeing unused kernel memory: 1548k freed <6>Write protecting the kernel read-only data: 5096k <6>processor ACPI0007:00: registered as cooling_device0 <6>processor ACPI0007:01: registered as cooling_device1 <6>thermal LNXTHERM:01: registered as thermal_zone0 <6>ACPI: Thermal Zone [THRM] (40 C) <6>Uniform Multi-Platform E-IDE driver <6>amd74xx 0000:00:06.0: UDMA133 controller <6>amd74xx 0000:00:06.0: IDE controller (0x10de:0x03ec rev 0xa2) <6>amd74xx 0000:00:06.0: IDE port disabled <6>amd74xx 0000:00:06.0: not 100% native mode: will probe irqs later <6> ide0: BM-DMA at 0xf000-0xf007 <7>Probing IDE interface ide0... <4>logips2pp: Detected unknown logitech mouse model 127 <6>hda: DVD DC 16X8X5, ATAPI CD/DVD-ROM drive <6>input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input1 <6>hdb: HDS722516VLAT80, ATA DISK drive <7>hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 <6>hda: UDMA/66 mode selected <7>hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4 <6>hdb: UDMA/100 mode selected <6>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <4>isa bounce pool size: 16 pages <6>ACPI: No dock devices found. <5>SCSI subsystem initialized <7>libata version 3.00 loaded. <7>sata_nv 0000:00:08.0: version 3.5 <4>ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 <6>sata_nv 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 <7>sata_nv 0000:00:08.0: setting latency timer to 64 <6>scsi0 : sata_nv <6>scsi1 : sata_nv <6>ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 23 <6>ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 23 <6>fan PNP0C0B:00: registered as cooling_device2 <6>ACPI: Fan [FAN] (on) <6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found <6>udevd version 128 started <6>: usbcore: registered new interface driver usbfs <6>: usbcore: registered new interface driver hub <6>: usbcore: registered new device driver usb <6>hdb: max request size: 512KiB <6>hdb: Host Protected Area detected. <6> current capacity is 321670847 sectors (164695 MB) <6> native capacity is 321672960 sectors (164696 MB) <4>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 <6>ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22 <7>ehci_hcd 0000:00:02.1: setting latency timer to 64 <6>ehci_hcd 0000:00:02.1: EHCI Host Controller <6>ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 <6>ehci_hcd 0000:00:02.1: debug port 1 <7>ehci_hcd 0000:00:02.1: cache line size of 64 is not supported <6>ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000 <6>hdb: Host Protected Area disabled. <6>hdb: 321672960 sectors (164696 MB) w/7938KiB Cache, CHS=20023/255/63 <7>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver <6>hdb: cache flushes supported <6> hdb:<6>ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 <6>usb usb1: configuration #1 chosen from 1 choice <4> hdb1 hdb2 <<6>hub 1-0:1.0: USB hub found <6>hub 1-0:1.0: 8 ports detected <4> hdb5 hdb6 hdb7 hdb8 hdb9 hdb10 hdb11 hdb12 hdb13 > <6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 <6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb1: Product: EHCI Host Controller <6>usb usb1: Manufacturer: Linux 2.6.27.5-1-default ehci_hcd <6>usb usb1: SerialNumber: 0000:00:02.1 <4>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 <6>ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 21 (level, low) -> IRQ 21 <7>ohci_hcd 0000:00:02.0: setting latency timer to 64 <6>ohci_hcd 0000:00:02.0: OHCI Host Controller <6>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 <6>ohci_hcd 0000:00:02.0: irq 21, io mem 0xfe02f000 <6>usb usb2: configuration #1 chosen from 1 choice <6>hub 2-0:1.0: USB hub found <6>hub 2-0:1.0: 8 ports detected <6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 <6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb2: Product: OHCI Host Controller <6>usb usb2: Manufacturer: Linux 2.6.27.5-1-default ohci_hcd <6>usb usb2: SerialNumber: 0000:00:02.0 <6>PM: Starting manual resume from disk <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS on hdb11, internal journal <6>EXT3-fs: mounted filesystem with ordered data mode. <6>udevd version 128 started <6>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 <6>ACPI: Power Button (FF) [PWRF] <6>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 <6>ACPI: Power Button (CM) [PWRB] <6>Floppy drive(s): fd0 is 1.44M <6>input: PC Speaker as /devices/platform/pcspkr/input/input4 <6>FDC 0 is a post-1991 82077 <6>forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. <4>ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20 <6>forcedeth 0000:00:07.0: PCI INT A -> Link[APCH] -> GSI 20 (level, low) -> IRQ 20 <7>forcedeth 0000:00:07.0: setting latency timer to 64 <6>hda: ATAPI 126X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache <6>Uniform CD-ROM driver Revision: 3.20 <6>rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 <6>: rtc0: alarms up to one year, y3k <4>hda: command error: status=0x51 { DriveReady SeekComplete Error } <4>hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } <4>ide: failed opcode was: unknown <3>ATAPI device hda: <4> Error: Illegal request -- (Sense key=0x05) <3> Logical block address out of range -- (asc=0x21, ascq=0x00) <3> The failed "Read 10" packet command was: <3> "28 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 " <3>end_request: I/O error, dev hda, sector 0 <3>Buffer I/O error on device hda, logical block 0 <4>hda: command error: status=0x51 { DriveReady SeekComplete Error } <4>hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } <4>ide: failed opcode was: unknown <3>ATAPI device hda: <4> Error: Illegal request -- (Sense key=0x05) <3> Logical block address out of range -- (asc=0x21, ascq=0x00) <3> The failed "Read 10" packet command was: <3> "28 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 " <3>end_request: I/O error, dev hda, sector 0 <3>Buffer I/O error on device hda, logical block 0 <6>forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x50ef @ 1, addr 00:1b:b9:c9:34:4c <6>forcedeth 0000:00:07.0: highdma pwrctl mgmt timirq lnktim msi desc-v3 <6>i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00 <6>i2c-adapter i2c-1: nForce2 SMBus adapter at 0xf400 <4>ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23 <6>HDA Intel 0000:00:05.0: PCI INT B -> Link[AAZA] -> GSI 23 (level, low) -> IRQ 23 <7>HDA Intel 0000:00:05.0: setting latency timer to 64 <6>hda_codec: Unknown model for ALC662, trying auto-probe from BIOS... <7>ALSA sound/pci/hda/hda_codec.c:3047: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) <7>ALSA sound/pci/hda/hda_codec.c:3051: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) <7>ALSA sound/pci/hda/hda_codec.c:3055: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) <7>ALSA sound/pci/hda/hda_codec.c:3056: mono: mono_out=0x0 <7>ALSA sound/pci/hda/hda_codec.c:3064: inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x0, aux=0x0 <6>Adding 771080k swap on /dev/hdb9. Priority:-1 extents:1 across:771080k <6>device-mapper: uevent: version 1.0.3 <6>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel(a)redhat.com <6>loop: module loaded <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS on hdb10, internal journal <6>EXT3-fs: mounted filesystem with ordered data mode. <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS on hdb12, internal journal <6>EXT3-fs: mounted filesystem with ordered data mode. <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS on hdb8, internal journal <6>EXT3-fs: mounted filesystem with ordered data mode. <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS on hdb13, internal journal <6>EXT3-fs: mounted filesystem with ordered data mode. <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS on hdb7, internal journal <6>EXT3-fs: mounted filesystem with ordered data mode. <4>fuse init (API version 7.9) Kernel logging (ksyslog) stopped. Kernel log daemon terminating. Boot logging started on /dev/tty1(/dev/console (deleted)) at Thu Nov 13 08:59:01 2008 done Starting udevd: done Loading drivers, configuring devices: done Loading required kernel modules doneActivating swap-devices in /etc/fstab... done[mntent]: warning: no final newline at the end of /etc/fstab Setting up the hardware clockdone Activating device mapper... done Starting MD Raid unused Checking file systems... fsck 1.41.1 (01-Sep-2008) /dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part10: clean, 162006/1311552 files, 1228772/2622611 blocks /dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part6: clean, 78/40160 files, 66484/160616 blocks /dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part12: clean, 10230/328000 files, 317381/1311282 blocks /dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part8: clean, 69742/2626560 files, 4018842/5242880 blocks /dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part13: clean, 4468/3006464 files, 6818055/11994522 blocks /dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part7: clean, 1802/328000 files, 51300/1311297 blocks donedone Mounting local file systems... /proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) [mntent]: warning: no final newline at the end of /etc/fstab [mntent]: warning: no final newline at the end of /etc/fstab debugfs on /sys/kernel/debug type debugfs (rw) udev on /dev type tmpfs (rw) devpts on /dev/pts type devpts (rw,mode=0620,gid=5) [mntent]: warning: no final newline at the end of /etc/fstab /dev/hdb10 on /10.3 type ext3 (rw) /dev/hdb6 on /boot type ext2 (rw) /dev/hdb12 on /home type ext3 (rw) /dev/hdb8 on /home10.3 type ext3 (rw,acl,user_xattr) /dev/hdb13 on /spare type ext3 (rw,acl,user_xattr) /dev/hdb7 on /tmp type ext3 (rw) Unexpected clusters per mft record (-1). Failed to mount '/dev/hdb1': Ongeldig argument The device '/dev/hdb1' doesn't have a valid NTFS. Maybe you selected the wrong device? Or the whole disk instead of a partition (e.g. /dev/hda, not /dev/hda1)? Or the other way around? failedFuse filesystem already availabledone Mounting fuse control filesystemdone Activating remaining swap-devices in /etc/fstab... done<notice>killproc: kill(660,29) Creating /var/log/boot.msg doneConfiguring serial ports... /dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A Configured serial ports doneSetting current sysctl status from /etc/sysctl.conf net.ipv4.icmp_echo_ignore_broadcasts = 1 net.ipv4.conf.all.rp_filter = 1 fs.inotify.max_user_watches = 65536 net.ipv4.conf.default.promote_secondaries = 1 net.ipv4.conf.all.promote_secondaries = 1 done Enabling syn flood protectiondone Disabling IP forwardingdone done Setting up hostname 'AMD64x2-sfn1'done Setting up loopback interface lo lo IP address: 127.0.0.1/8 IP address: 127.0.0.2/8 done Mounting securityfs on /sys/kernel/security done Loading AppArmor profiles done System Boot Control: The system has been set up Skipped features: boot.md boot.cycle System Boot Control: Running /etc/init.d/boot.local done<notice>killproc: kill(660,3) INIT: Boot logging started on /dev/tty1(/dev/console) at Thu Nov 13 08:59:16 2008 Master Resource Control: previous runlevel: N, switching to runlevel: 5 <notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=140 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x355 DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1152x864.cfg PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part11 _=/sbin/startproc DAEMON=/sbin/acpid ] Initializing random number generatordone Starting acpid done <notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=140 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= vga=0x355 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1152x864.cfg PWD=/ PREVLEVEL=N LINES=50 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part11 _=/sbin/startproc DAEMON=/sbin/syslog-ng ] <notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=140 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= vga=0x355 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1152x864.cfg PWD=/ PREVLEVEL=N LINES=50 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part11 _=/sbin/startproc DAEMON=/sbin/klogd ] Starting syslog servicesdone Starting D-Bus daemondone Starting Firewall Initialization (phase 1 of 2) done Loading CPUFreq modulesdone Starting HAL daemon<notice>startproc: execve (/sbin/rpcbind) [ /sbin/rpcbind ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=140 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x355 DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1152x864.cfg PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part11 _=/sbin/startproc DAEMON=/sbin/rpcbind ] <notice>startproc: execve (/sbin/auditd) [ /sbin/auditd -s disable ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=140 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x355 DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1152x864.cfg PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part11 _=/sbin/startproc DAEMON=/sbin/auditd ] <notice>startproc: execve (/usr/sbin/nmbd) [ /usr/sbin/nmbd -D -s /etc/samba/smb.conf ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=140 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x355 DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1152x864.cfg PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part11 _=/sbin/startproc DAEMON=/usr/sbin/nmbd ] Starting rpcbind done Starting Samba NMB daemon done done Starting auditd done Mount CIFS File Systems unused <notice>startproc: execve (/usr/bin/kdm) [ /usr/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=140 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= vga=0x355 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1152x864.cfg PWD=/ LANG=nl_NL.UTF-8 PREVLEVEL=N LINES=50 QT_SYSTEM_DIR=/usr/share/desktop-data SHLVL=2 HOME=/ XCURSOR_THEME=DMZ WINDOWMANAGER= SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part11 _=/sbin/startproc DAEMON=/usr/bin/kdm ] Starting service kdmdone Backgrounding to notify hosts... Not starting NFS client services - no NFS found in /etc/fstab:unused Loading console font lat9w-16.psfu -m trivial G0:loadable doneLoading keymap assuming iso-8859-15 euro Loading /usr/share/kbd/keymaps/i386/qwerty/us.map.gz doneLoading compose table latin1.adddone Start Unicode mode done<notice>checkproc: /usr/bin/kdm 2302 <notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=140 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x355 DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1152x864.cfg PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part11 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ] <notice>startproc: execve (/usr/sbin/irqbalance) [ /usr/sbin/irqbalance ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=140 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x355 DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1152x864.cfg PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part11 _=/sbin/startproc DAEMON=/usr/sbin/irqbalance ] Starting cupsddone Starting irqbalance done Starting java.binfmt_misc done <notice>startproc: execve (/usr/sbin/NetworkManager) [ /usr/sbin/NetworkManager ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=140 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts DO_CONFIRM= vga=0x355 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1152x864.cfg PWD=/etc/sysconfig/network PREVLEVEL=N LINES=50 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part11 _=/sbin/startproc DAEMON=/usr/sbin/NetworkManager ] Starting the NetworkManagerdone Starting Avahi daemon done Starting Name Service Cache Daemon<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=140 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x355 DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1152x864.cfg PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part11 _=/sbin/startproc DAEMON=/usr/sbin/nscd ] done Starting Avahi DNS Configuration daemon done No active profileunused Starting mail service (Postfix)<notice>startproc: execve (/usr/sbin/smbd) [ /usr/sbin/smbd -D -s /etc/samba/smb.conf ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 TMPDIR=/var/tmp LC_ALL= INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=140 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x355 DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1152x864.cfg LANG=nl_NL.UTF-8 PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 LC_CTYPE= splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part11 _=/sbin/startproc DAEMON=/usr/sbin/smbd ] Starting Samba SMB daemon done <notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=140 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x355 DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1152x864.cfg PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part11 _=/sbin/startproc DAEMON=/usr/sbin/sshd ] Starting SSH daemondone Starting smartd done done Starting CRON daemon<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=140 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x355 DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1152x864.cfg PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part11 _=/sbin/startproc DAEMON=/usr/sbin/cron ] done Starting Firewall Initialization (phase 2 of 2) done done Master Resource Control: runlevel 5 has been reached Skipped services in runlevel 5: nfs smbfs pm-profiler <notice>killproc: kill(1860,3) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 58

[Bug 478407] freetype2 has subpixel rendering enabled
by bugzilla_noreply＠novell.com 09 Mar '09

09 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=478407 User crrodriguez(a)novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=478407#c2 Cristian Rodríguez <crrodriguez(a)novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |ASSIGNED CC| |crrodriguez(a)novell.com AssignedTo|hvogel(a)novell.com |crrodriguez(a)novell.com --- Comment #2 from Cristian Rodríguez <crrodriguez(a)novell.com> 2009-03-09 09:41:19 MST --- I will check this one. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 0

[Bug 481207] New: kbdsniffd start script typo
by bugzilla_noreply＠novell.com 09 Mar '09

09 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=481207 Summary: kbdsniffd start script typo Classification: openSUSE Product: openSUSE 11.1 Version: Final Platform: i686 OS/Version: openSUSE 11.1 Status: NEW Severity: Minor Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: 19972005(a)mail.ru QAContact: qa(a)suse.de Found By: --- Created an attachment (id=276537) --> (https://bugzilla.novell.com/attachment.cgi?id=276537) a patch to replace a typo in path User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.0.6) Gecko/2009012700 SUSE/3.0.6-0.1.2 Firefox/3.0.6 acer15:~ # /etc/init.d/kbdsniffd restart Shutting down kbdsniffd done Starting kbdsniffd done acer15:~ # /etc/init.d/kbdsniffd status Checking for kbdsniffd: checkproc: cannot stat /usb/sbin/kbdsniffd: No such file or directory acer15:~ # Reproducible: Always Steps to Reproduce: /etc/init.d/kbdsniffd status Actual Results: Checking for kbdsniffd: checkproc: cannot stat /usb/sbin/kbdsniffd: No such file or directory Expected Results: Checking for kbdsniffd: running -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 413219] New: Apache authn_dbd_module doesn't work with Postgresql
by bugzilla_noreply＠novell.com 09 Mar '09

09 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=413219 Summary: Apache authn_dbd_module doesn't work with Postgresql Product: openSUSE 11.1 Version: Factory Platform: x86-64 OS/Version: openSUSE 11.0 Status: NEW Severity: Normal Priority: P5 - None Component: Apache AssignedTo: bnc-team-apache(a)forge.provo.novell.com ReportedBy: mkaspar(a)it-media.cz QAContact: qa(a)suse.de Found By: --- I tried to configure Apache to authentize against PostgreSQL DB. I wanted to use authn_dbd_module but after configuration, Apache fails to start with error message: Syntax error on line 1 of /etc/apache2/conf.d/dbd.conf: DBD: Failed to load driver apr_dbd_pgsql_driver I'v got libapr-util1-dbd-pgsql-1.2.12-43.1 installed, dbd and authn_dbd modules loaded via sysconfig/apache2. I created /etc/apache2/conf.d/dbd.conf file with: DBDriver pgsql DBDParams "dbname=db user=user password=password" DBDMin 4 DBDKeep 8 DBDMax 20 DBDExptime 300 It's on openSUSE 11 with all the updates installed. The same problem appears on openSUSE 10.3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 8

[Bug 480779] New: Kernel Network Scheduling Watchdog fires
by bugzilla_noreply＠novell.com 09 Mar '09

09 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=480779 User laptop(a)chappell-family.com added comment https://bugzilla.novell.com/show_bug.cgi?id=480779#c1 Summary: Kernel Network Scheduling Watchdog fires Classification: openSUSE Product: openSUSE 11.1 Version: Final Platform: i586 OS/Version: openSUSE 11.1 Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: laptop(a)chappell-family.com QAContact: qa(a)suse.de Found By: --- Created an attachment (id=276225) --> (https://bugzilla.novell.com/attachment.cgi?id=276225) System boot log User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-GB; rv:1.9.0.6) Gecko/2009011913 Firefox/3.0.6 Kernel reports a network scheduling watchdog expiry when streaming an mp4 movie using twonkyvision. System is D945GCLF2, latest kernel. Reproducible: Sometimes Steps to Reproduce: 1. Stream a movie, producing about 40Mbits/s output 2. Likelihood increased by simultaneously browsing web Actual Results: Feb 28 18:26:05 leserver kernel: ------------[ cut here ]------------ Feb 28 18:26:05 leserver kernel: WARNING: at net/sched/sch_generic.c:219 dev_watchdog+0x102/0x180() Feb 28 18:26:05 leserver kernel: Modules linked in: xt_DSCP xt_TCPMSS xt_state af_packet xt_mark xt_length xt_tcpudp xt_MARK c ls_fw sch_sfq sch_htb ipt_recent ipt_REJECT ipt_LOG ipt_MASQUERADE iptable_mangle iptable_nat nf_nat nf_conntrack_ipv4 nf_conn track iptable_filter ip_tables x_tables nfsd lockd nfs_acl auth_rpcgss sunrpc exportfs smsc47m1(N) smsc47m192(N) hwmon_vid bin fmt_misc snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device 8021q garp stp fuse loop dm_mod snd_hda_intel snd_pcm snd_timer iTCO _wdt snd_page_alloc iTCO_vendor_support r8169 snd_hwdep rtc_cmos mii ppdev rtc_core i2c_i801 snd intel_agp pcspkr rtc_lib soun dcore agpgart parport_pc button i2c_core serio_raw parport sg usbhid hid ff_memless ehci_hcd uhci_hcd sd_mod crc_t10dif usbcor e edd ext3 mbcache jbd fan ide_pci_generic piix ide_core ata_generic ata_piix libata scsi_mod dock thermal processor thermal_s ys hwmon [last unloaded: speedstep_lib] Feb 28 18:26:05 leserver kernel: Supported: No Feb 28 18:26:05 leserver kernel: Pid: 0, comm: swapper Tainted: G 2.6.27.19-3.2-pae #1 Feb 28 18:26:05 leserver kernel: [<c01061cc>] dump_trace+0x6b/0x249 Feb 28 18:26:05 leserver kernel: [<c0106ca3>] show_trace+0x20/0x39 Feb 28 18:26:05 leserver kernel: [<c0347a23>] dump_stack+0x71/0x76 Feb 28 18:26:05 leserver kernel: [<c0129c52>] warn_slowpath+0x6f/0x90 Feb 28 18:26:05 leserver kernel: [<c02f282a>] dev_watchdog+0x102/0x180 Feb 28 18:26:05 leserver kernel: [<c0131d6f>] run_timer_softirq+0x145/0x1a7 Feb 28 18:26:05 leserver kernel: [<c012e519>] __do_softirq+0x83/0x107 Feb 28 18:26:05 leserver kernel: [<c012e5cf>] do_softirq+0x32/0x36 Feb 28 18:26:05 leserver kernel: [<c012e6cd>] irq_exit+0x35/0x69 Feb 28 18:26:05 leserver kernel: [<c0111f70>] smp_apic_timer_interrupt+0x74/0x80 Feb 28 18:26:05 leserver kernel: [<c0105ab8>] apic_timer_interrupt+0x28/0x30 Feb 28 18:26:05 leserver kernel: [<c010a4df>] mwait_idle+0x2f/0x32 Feb 28 18:26:05 leserver kernel: [<c0103aaa>] cpu_idle+0xc7/0xe9 Feb 28 18:26:05 leserver kernel: ======================= Feb 28 18:26:05 leserver kernel: ---[ end trace c762c6243adc206c ]--- Expected Results: No kernel timeout. Linux leserver 2.6.27.19-3.2-pae #1 SMP 2009-02-25 15:40:44 +0100 i686 i686 i386 GNU/Linux Twonkyvision 4.4.9 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 393748] New: albw.ttf and/or arial. ttf in font path make Epiphany and Firefox 3 use wrong menu fonts
by bugzilla_noreply＠novell.com 09 Mar '09

09 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=393748 Summary: albw.ttf and/or arial.ttf in font path make Epiphany and Firefox 3 use wrong menu fonts Product: openSUSE 11.0 Version: Factory Platform: PC OS/Version: openSUSE 11.0 Status: NEW Severity: Normal Priority: P5 - None Component: X11 Applications AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: mrmazda(a)ij.net QAContact: sndirsch(a)novell.com Found By: --- To reproduce: 1-place albw.ttf and/or arial.ttf in /usr/share/fonts/truetype and/or ~/.fonts 2-ensure GTK2 is set to use fonts specified in KDE3 3-open Firefox 2.9.9x 4-open Epiphany 5-open Konq and/or SeaMonkey Actual results: 1-Epiphany & Firefox menu fonts are different from Konsole, Konq & SeaMonkey Expected results: 1-Menu fonts are the same in Epiphany, SeaMonkey, Firefox, Konq & Konsole I made these tests using 4 different Factory systems. albw.ttf I got by installing the 10.3 DVD's agfa-fonts rpm. arial.ttf files tried were both 367112 bytes from 2004/08/04 and 296712 bytes from 2001/08/23. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 39

[Bug 301681] New: issues with dsl connections
by bugzilla_noreply＠novell.com 09 Mar '09

09 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=301681#c1 Summary: issues with dsl connections Product: openSUSE 10.2 Version: Final Platform: i686 OS/Version: openSUSE 10.2 Status: NEW Severity: Enhancement Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: sliwa(a)blue.cft.edu.pl QAContact: qa(a)suse.de Found By: --- When a dsl connections is set up to be started on hotplug, the "DSL Configuration Overview" shows "Started automatically at boot". When I plug the modem, firmware is loaded etc., but no pppd is started. usb 1-1: [UEAGLE-ATM] usb_control_msg error -19 usb 1-1: [ueagle-atm] ADSL device removed ohci_hcd 0000:00:02.0: wakeup usb 1-1: new full speed USB device using ohci_hcd and address 4 usb 1-1: new device found, idVendor=1110, idProduct=9022 usb 1-1: new device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-1: configuration #1 chosen from 1 choice usb 1-1: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X9022) : Eagle II usb 1-1: reset full speed USB device using ohci_hcd and address 4 usb 1-1: [ueagle-atm] pre-firmware device, uploading firmware usb 1-1: [ueagle-atm] loading firmware ueagle-atm/eagleII.fw usb 1-1: [ueagle-atm] firmware uploaded usb 1-1: USB disconnect, address 4 ohci_hcd 0000:00:02.0: wakeup usb 1-1: new full speed USB device using ohci_hcd and address 5 usb 1-1: new device found, idVendor=1110, idProduct=9021 usb 1-1: new device strings: Mfr=0, Product=2, SerialNumber=3 usb 1-1: Product: ADSL-USB Modem usb 1-1: SerialNumber: 00604C44EC66 usb 1-1: configuration #1 chosen from 1 choice usb 1-1: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X9021) : Eagle II usb 1-1: reset full speed USB device using ohci_hcd and address 5 usb 1-1: [ueagle-atm] using iso mode usb 1-1: [ueagle-atm] (re)booting started usb 1-1: [ueagle-atm] modem operational usb 1-1: [ueagle-atm] ATU-R firmware version : 44e2ea17 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 17