November 2009 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 536215] New: Check installation of package "jzlib-demo"
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=536215 Summary: Check installation of package "jzlib-demo" Classification: openSUSE Product: openSUSE 11.1 Version: Final Platform: x86-64 OS/Version: openSUSE 11.1 Status: NEW Severity: Normal Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: Markus.Elfring(a)web.de QAContact: jsrain(a)novell.com Found By: --- Can the package "jzlib-demo" be improved so that the error message will not appear at the end? Sonne:~ # zypper update jzlib-demo Loading repository data... Reading installed packages... Resolving package dependencies... Problem: cannot install both jzlib-demo-1.0.7-0.pm.2.noarch and jzlib-demo-1.0.7-6.14.noarch Solution 1: install jzlib-demo-1.0.7-6.14.noarch (with vendor change) http://packman.links2linux.de --> openSUSE Build Service Solution 2: do not ask to install a solvable providing jzlib-demo > 1.0.7-0.pm.2 Choose from above solutions by number or cancel [1/2/C]: 1 Resolving dependencies... Resolving package dependencies... The following package is going to be upgraded: jzlib-demo The following package is going to change vendor: jzlib-demo Overall download size: 6.0 K. No additional space will be used or freed after the operation. Continue? [YES/no]: Retrieving package jzlib-demo-1.0.7-6.14.noarch (1/1), 6.0 K (12.0 K unpacked) Retrieving: jzlib-demo-1.0.7-6.14.noarch.rpm [done] Installing: jzlib-demo-1.0.7-6.14 [error] Installation of jzlib-demo-1.0.7-6.14 failed: (with --nodeps --force) Error: Subprocess failed. Error: RPM failed: error: unpacking of archive failed on file /usr/share/jzlib: cpio: rename failed - Is a directory Abort, retry, ignore? [A/r/i]: -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 535752] New: xsane crashed
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=535752 Summary: xsane crashed Classification: openSUSE Product: openSUSE 11.2 Version: Milestone 6 Platform: i686 OS/Version: SuSE Other Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: 80classics(a)gmail.com QAContact: qa(a)suse.de Found By: --- Created an attachment (id=316068) --> (http://bugzilla.novell.com/attachment.cgi?id=316068) xsane crashed User-Agent: Mozilla/5.0 (X11; U; Linux i686; it; rv:1.9.1.2) Gecko/20090730 SUSE/3.5.2-2.4 Firefox/3.5.2 I've configured my HP Scanjet 3800 scanner using YAST. I've selected the right sane backend from YAST database and the configuration has been successfully saved. xsane has always crashed with the same error (more details below) Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 33

[Bug 534909] New: ipmitool-1.8.10-109.64: missing call to close
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=534909 Summary: ipmitool-1.8.10-109.64: missing call to close Classification: openSUSE Product: openSUSE 11.2 Version: Factory Platform: All OS/Version: openSUSE 11.1 Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: dcb314(a)hotmail.com QAContact: qa(a)suse.de Found By: --- I just had a look at factory package ipmitool-1.8.10-109.64 For source code file ipmitool-1.8.10/lib/ipmi_sdradd.c around line 340, function ipmi_sdr_read_records is the following code if ((fd = open(filename, O_RDONLY)) < 0) { but I fail to find any matching call to close. This looks like a resource leak to me. Suggest add call to close. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 534216] New: TV-Card Hauppauge WinTV-HVR1300 does not work. Loading hotplug firmware failed
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=534216 Summary: TV-Card Hauppauge WinTV-HVR1300 does not work. Loading hotplug firmware failed Classification: openSUSE Product: openSUSE 11.2 Version: Milestone 6 Platform: i686 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: jradzuweit(a)jarf.de QAContact: qa(a)suse.de Found By: --- Created an attachment (id=315177) --> (http://bugzilla.novell.com/attachment.cgi?id=315177) dmesg snapshot User-Agent: Mozilla/5.0 (X11; U; Linux i686; de; rv:1.9.0.13) Gecko/2009080200 SUSE/3.0.13-0.1.2 Firefox/3.0.13 During loading the driver cx88 for TV card an error occures. See attached snapshot from dmesg. Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 5

[Bug 534032] New: vlan naming conventions and ifup scripts
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=534032 Summary: vlan naming conventions and ifup scripts Classification: openSUSE Product: openSUSE 11.2 Version: Factory Platform: x86-64 OS/Version: SuSE Other Status: NEW Severity: Normal Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: diego.ercolani(a)gmail.com QAContact: qa(a)suse.de Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; it; rv:1.9.0.13) Gecko/2009080200 SUSE/3.0.13-0.1.2 Firefox/3.0.13 I saw in the OpenSuSE 11.2 if you want to use VLANs (802.1q) you have to manually prepare a configuration file in /etc/sysconfig/network/ifcfg-vlanNNNN where NNNN is the vlan number. In setup script (ifup-802.1q) there is a cabled configuration: vconfig set_name_type vlan_plus_vid_no_pad My issue is that in this manner the naming convention have that the vlan interface is named vlanNNNN where NNNN is the VLAN number, this probably simplifies scripts but: What happen if I want to assign 2 interfaces (e.g. eth0 and eth1) to a particular VLAN (for example 99)? Normally I would create 2 vlan interfaces: `vconfig add eth0 99` that creates interface eth0.99 `vconfig add eth1 99` that creates interface eth1.99 with the suse setup this condition is impossible you can have only one interface per vlan. For the naming convention is possible to set the name of the vlan interface using `ip link set DEVICE alias ALIASNAME dev REALNAME`, you can ever find the correspondance to the real interface using the proc entry: /proc/net/vlan/config so using of aliases could be very useful. Please note that alias name can be normally only up to 15 characters. In the configuration of openSuSE interfaces you can use the vaiable NAME to set up the name of the interface, it should be the variable to use to setup the alias name of the vlan interface I think.... Another question: how to use vlan using networkmanager? Thank you for your support Reproducible: Always -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 9

[Bug 533818] New: sysconfig: document onboot mode
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=533818 Summary: sysconfig: document onboot mode Classification: openSUSE Product: openSUSE 11.1 Version: Final Platform: All OS/Version: Linux Status: NEW Severity: Enhancement Priority: P5 - None Component: Documentation AssignedTo: ke(a)novell.com ReportedBy: jengelh(a)medozas.de QAContact: ke(a)novell.com CC: zoz(a)novell.com Found By: Beta-Customer I notice that sysconfig(5) does not document STARTMODE=onboot. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 17

[Bug 533601] New: Live-Installation on Blank Hard Drive Fails
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=533601 Summary: Live-Installation on Blank Hard Drive Fails Classification: openSUSE Product: openSUSE 11.2 Version: Milestone 6 Platform: Other OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: Live Medium AssignedTo: coolo(a)novell.com ReportedBy: binner(a)kde.org QAContact: qa(a)suse.de Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.1.2) Gecko/20090730 SUSE/3.5.2-2.1 Firefox/3.5.2 Testing Milestone 6 KDE Live-CD Installation within Virtualbox on a fresh/empty disk drive fails with a "Switching to the Installed System Failed" popup. Reproducible: Always -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 18

[Bug 533579] New: cfengine-2.2.8-6.1: missing call to closedir
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=533579 Summary: cfengine-2.2.8-6.1: missing call to closedir Classification: openSUSE Product: openSUSE 11.2 Version: Factory Platform: All OS/Version: openSUSE 11.1 Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: dcb314(a)hotmail.com QAContact: qa(a)suse.de Found By: --- I just had a look at factory package cfengine-2.2.8-6.1 For source code file cfengine-2.2.8/src/link.c around line 160, function LinkChildren is the following code if ((dirh = opendir(odir)) == NULL) but I fail to find any matching call to closedir This looks like a resource leak to me. Suggest add call to closedir. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 533550] New: Virtualbox does not configure host side network interfaces for "host-only networking"
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=533550 Summary: Virtualbox does not configure host side network interfaces for "host-only networking" Classification: openSUSE Product: openSUSE 11.1 Version: Final Platform: i686 OS/Version: openSUSE 11.1 Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: norbert.jurkeit(a)web.de QAContact: qa(a)suse.de Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; de; rv:1.9.1.2) Gecko/20090730 SUSE/3.5.2-2.1 Firefox/3.5.2 A problem has been encountered with Virtualbox version 3.0.4 from the Build Service: The GUI main program is supposed to configure host side network interfaces (i.e. assign IP address to vboxnet0) according to settings entered in menu file/global settings/network. However this does not work when the program is run by non-root users. In order to fix this, file /usr/lib/virtualbox/VBoxNetAdpCtl needs access mode rwsr-x--- and group membership vboxusers. Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 10

[Bug 533491] New: Contol Panel - Default Applications
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=533491 Summary: Contol Panel - Default Applications Classification: openSUSE Product: openSUSE 11.2 Version: Factory Platform: x86-64 OS/Version: Other Status: NEW Severity: Minor Priority: P5 - None Component: GNOME AssignedTo: bnc-team-gnome(a)forge.provo.novell.com ReportedBy: taril_laszlo(a)yahoo.co.uk QAContact: qa(a)suse.de Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; hu-HU; rv:1.9.1.2) Gecko/20090730 SUSE/3.5.2-2.4 Firefox/3.5.2 It appears twice in the control panel Visuals and System It has no graphical default icon. Reproducible: Always Steps to Reproduce: 1. click on Computer (taskbar) and select Contol Panel 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 10