November 2009 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 539669] New: wireless initscripts wants iw tool, but not depends on it
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=539669 Summary: wireless initscripts wants iw tool, but not depends on it Classification: openSUSE Product: openSUSE 11.2 Version: Factory Platform: x86-64 OS/Version: SuSE Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: moje(a)kalhotky.net QAContact: qa(a)suse.de Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; cs-CZ; rv:1.9.1.2) Gecko/20090730 SUSE/3.5.2-3.5 Firefox/3.5.2 script /etc/sysconfig/network/scripts/ifup-wireless tests if iw command exists (test is at line 185) and refuse to enable wireless interface if iw not found. Sysconfig package (where mentioned script belongs to) don't depend on iw package. This cause not working wireless interface after upgrade. Reproducible: Always Steps to Reproduce: 1. upgrade from milestone6 to current factory 2. reboot 3. try rcnetwork restart Actual Results: Setting up network interfaces: eth0 device: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) eth0 IP address: 192.168.172.1/24 eth0 done wlan0 name: ASUSTeK BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller cannot find 'iw', please install wlan0 done Setting up service network . . . . . . . . . . Expected Results: Setting up network interfaces: eth0 device: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) eth0 IP address: 192.168.172.1/24 eth0 done wlan0 name: ASUSTeK BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller wlan0 starting wpa_supplicant wlan0 Starting DHCP4 client. . wlan0 IP address: 172.16.42.42/24 (moje) wlan0 -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 11

[Bug 539521] New: installer shows wrong partition size while formatting swap partition
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=539521 Summary: installer shows wrong partition size while formatting swap partition Classification: openSUSE Product: openSUSE 11.2 Version: Milestone 7 Platform: x86 OS/Version: SuSE Other Status: NEW Severity: Minor Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: patz1983(a)googlemail.com QAContact: jsrain(a)novell.com Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; de; rv:1.9.0.13) Gecko/2009080200 SUSE/3.0.13-0.1 Firefox/3.0.13 i was installing opensuse 11.2 milestone 7. the hdd i used was a western digital wd600ab-32cza0 . the drive is pata and 60GB in size (55.7 if you do your maths correct). the drive contained a single ext3 partition before the installation. i didn't alter the partition setup suggestet by the installer. when the installer did the formatting of the swap partition, the screen output read something like: formatting swap partition (55.7 GB) the size of the swap partition is <2GB (don't remember the exact size) and it is apparently formatted correctly. the size of root and home partition were displayed correctly. its not really a major bug, but might be a bit scary if you have other partitions on the drive and don't know if your data is gone. Reproducible: Didn't try Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 42

[Bug 539401] New: cups fails to start
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=539401 Summary: cups fails to start Classification: openSUSE Product: openSUSE 11.2 Version: Milestone 7 Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Printing AssignedTo: jsmeix(a)novell.com ReportedBy: estellnb(a)gmail.com QAContact: jsmeix(a)novell.com Found By: --- User-Agent: Mozilla/5.0 (compatible; Konqueror/3.5; Linux) KHTML/3.5.10 (like Gecko) SUSE Trying to configure my printer YaST says cups is not running - and it really isn`t: lpstat -h localhost -r lpstat: Verbindung zum Server nicht möglich localhost:631 - no response > cups status Checking for cupsd: unused > cups start Starting cupsdcupsd: Child exited with status 13! startproc: exit status of parent of /usr/sbin/cupsd: 2 Reproducible: Always -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 25

[Bug 539275] New: Slideshow talks about 11.1
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=539275 Summary: Slideshow talks about 11.1 Classification: openSUSE Product: openSUSE 11.2 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: binner(a)kde.org QAContact: jsrain(a)novell.com Found By: --- User-Agent: Mozilla/5.0 (compatible; Konqueror/4.3; Linux) KHTML/4.3.1 (like Gecko) SUSE The slideshow during installation talks about openSUSE 11.1, slideshow.pot doesn't seem to be updated either. Reproducible: Always -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 539243] New: MySQL changes
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=539243 Summary: MySQL changes Classification: openSUSE Product: openSUSE 11.2 Version: Milestone 7 Platform: Other OS/Version: All Status: NEW Severity: Normal Priority: P5 - None Component: Release Notes AssignedTo: ke(a)novell.com ReportedBy: suse-beta(a)cboltz.de QAContact: coolo(a)novell.com CC: mhrusecky(a)novell.com Found By: Beta-Customer Bug 539148 pointed out one of several important changes in MySQL. Basically the whole file /usr/share/doc/packages/mysql/README.SuSE should be copied to the release notes. I'll paste it here for reference and include some comments with recommended text changes marked with ### Note: Even if Michal adds a %post script to remove skip-federated, I'd keep the paragraph about it in the release notes. Notes about MySQL 5.1 package: ============================== With MySQL 5.1 package we introduced some changes you may like to know. Most of them will affect you only if you are upgrading from previous version and you did some changes to your configuration, but I'll try to explain most notable changes. ### ", but I'll [...] notable changes" should be deleted 1) Plugins: =========== One of the new features in MySQL 5.1 is support for plugins. So some of the storage engines are now shipped like that. You can use following plugins: - archive - blackhole - federated - example ### "As you see," should be seleted As you see, InnoDB is still compiled as internal part of MySQL. If you are upgrading from version 5.0 or if this is your first installation of MySQL 5.1, all plugins will be enabled by default and you can disable them manually later (see http://dev.mysql.com/doc/refman/5.1/en/uninstall-plugin.html) With this change you need to remove skip-federated option from your my.cnf file if you have changed it manually. This option was there by default in previous versions of MySQL. 2) File locations: ================== There were some changes in files locations. Most of them was made in default ### _were_ made in _the_ configuration file so if you are experiencing problems and you have made some manual adjustments to your /etc/my.cnf, try to merge this file with /etc/my.cnf.rpmnew. First of them is that MySQL socket file and pid file were moved from /var/lib/mysql to more reasonable location ( /var/run/mysql ) by default. Second change is that MySQL log files are in /var/log/mysql. ### make this paragraph a bullet list: ### - MySQL socket file and pid file were moved from /var/lib/mysql to more ### reasonable location ( /var/run/mysql ) by default ### - MySQL log files are in /var/log/mysql 3) BerkeleyDB: ============== Other important change is that MySQL no longer contains BerkeleyDB as storage ### Remove "Other important change is that" engine. There is no fix for that and if you used it before, you have to migrate your data to different storage engine BEFORE updating. This can be done for example using following command: ALTER TABLE foo ENGINE = INNODB; 4) MySQL Upgrade Log ==================== Last thing you may find useful is that if you missed messages displayed during ### Delete "Last thing ... useful is that" automatic MySQL database upgrade, you can find them from now on in /var/log/mysql/mysql_upgrade.log -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 15

[Bug 539236] New: ifolder3 does not start
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=539236 Summary: ifolder3 does not start Classification: openSUSE Product: openSUSE 11.2 Version: Milestone 7 Platform: Other OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: aj(a)novell.com QAContact: qa(a)suse.de Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.1.2) Gecko/20090730 SUSE/3.5.2-1.1 Firefox/3.5.2 On my openSUSE 11.2 Milestone 7 x86-64 system, I installed ifolder3 and started it: # ifolder Cannot open assembly '/usr/bin/#!/bin/sh': No such file or directory. Unhandled Exception: System.ApplicationException: The Simias process returned an error: 2 at Simias.Client.Manager.Start () [0x00000] at Novell.iFolder.iFolderApplication.StartiFolder () [0x00000] Reproducible: Always Steps to Reproduce: 1. Just start ifolder 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 39

[Bug 539096] New: jack-0.116.2-3.10: memory leak
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=539096 Summary: jack-0.116.2-3.10: memory leak Classification: openSUSE Product: openSUSE 11.2 Version: Factory Platform: All OS/Version: openSUSE 11.1 Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: dcb314(a)hotmail.com QAContact: qa(a)suse.de Found By: --- I just had a look at factory package jack-0.116.2-3.10 For source code file jack-audio-connection-kit-0.116.2/drivers/alsa/alsa_driver.c around line 2630, function driver_initialize, is the following code midi_driver_name = strdup (param->value.str); but I fail to find a matching call to free. This looks like a memory leak to me. Suggest add call to free near the end of the routine. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 5

[Bug 539053] New: password check: pam-config should check for minimum password length (>=5)
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=539053 Summary: password check: pam-config should check for minimum password length (>=5) Classification: openSUSE Product: openSUSE 11.2 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: urwald(a)gmx-topmail.de QAContact: jsrain(a)novell.com Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; es-ES; rv:1.9.1.2) Gecko/20090730 SUSE/3.5.2-3.4 Firefox/3.5.2 YaST user security settings: password check: Also pam-config should check for minimum password length (>=5 in pam_cracklib) [This bug was forked from bug 535617] Reproducible: Always -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 538897] New: Check if PolicyKit in KDE works with PackageKit
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=538897 User llunak(a)novell.com added comment http://bugzilla.novell.com/show_bug.cgi?id=538897#c535431 Summary: Check if PolicyKit in KDE works with PackageKit Classification: openSUSE Product: openSUSE 11.2 Version: Factory Platform: Other OS/Version: Other Status: ASSIGNED Severity: Blocker Priority: P5 - None Component: KDE4 Workspace AssignedTo: llunak(a)novell.com ReportedBy: llunak(a)novell.com QAContact: qa(a)suse.de Found By: --- According to bug #535431 PackageKit has changed to depend on a an unreleased backwards incompatible version of PolicyKit. The status of the KDE support needs to be checked. *sigh* -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 14

[Bug 538852] New: cyrus-imapd autostart requires saslauthd
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=538852 Summary: cyrus-imapd autostart requires saslauthd Classification: openSUSE Product: openSUSE 11.2 Version: Milestone 7 Platform: i586 OS/Version: SuSE Other Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: thomas(a)cupracer.de QAContact: qa(a)suse.de Found By: --- Created an attachment (id=318023) --> (http://bugzilla.novell.com/attachment.cgi?id=318023) patch for /etc/init.d/cyrus User-Agent: Mozilla/5.0 (X11; U; Linux i686; de; rv:1.9.0.13) Gecko/2009080200 SUSE/3.0.13-0.1.2 Firefox/3.0.13 The init-file "/etc/init.d/cyrus" required "saslauthd" for start and stop. So, to get autostart activated for cyrus-imapd, the package "cyrus-sasl-saslauthd" has to be installed and "saslauthd" autostart needs to be activated, too. BUT: There are ways to configure cyrus-imapd that there's no need for saslauthd (i.e. with cyrus-sasl-sqlauxprop). Because of this, the dependency should be cleared. Reproducible: Always Steps to Reproduce: 1. # chkconfig -a cyrus Actual Results: insserv: Service saslauthd has to be enabled to start service cyrus insserv: exiting now! /sbin/insserv failed, exit code 1 cyrus 0:off 1:off 2:off 3:off 4:off 5:off 6:off Expected Results: cyrus 0:off 1:off 2:off 3:on 4:off 5:on 6:off I don't know if there are reasons to keep saslauthd as a requirement, but for me it seems to be logical to clear this dependency. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4