January 2009 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 343279] New: kdepasswd and ldap
by bugzilla_noreply＠novell.com 08 Jan '09

08 Jan '09

https://bugzilla.novell.com/show_bug.cgi?id=343279 Summary: kdepasswd and ldap Product: openSUSE 10.3 Version: Final Platform: x86-64 OS/Version: openSUSE 10.3 Status: NEW Severity: Normal Priority: P5 - None Component: KDE AssignedTo: kde-maintainers(a)suse.de ReportedBy: kames(a)ibg-monforts.de QAContact: qa(a)suse.de Found By: --- It`s not passible to change a user password by using kdepasswd. The only error message in messages is passwd[30147]: pam_unix2(passwd:chauthtok): user "xxxx" does not exist in /etc/passwd or NIS I use the same /etc/pam.d/* in a opensuse 10.2 enviroments. And there is no Problem. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 13

[Bug 428129] New: The problems will show if I would like bunrning
by bugzilla_noreply＠novell.com 08 Jan '09

08 Jan '09

https://bugzilla.novell.com/show_bug.cgi?id=428129 Summary: The problems will show if I would like bunrning Product: openSUSE 10.2 Version: Final Platform: x86 OS/Version: SuSE Linux 10.1 Status: NEW Severity: Normal Priority: P5 - None Component: KDE AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: mk(a)drkipp.de QAContact: qa(a)suse.de Found By: Other System ----------------------- K3b Version: 0.12.14 KDE Version: 3.5.1 Level "a" QT Version: 3.3.5 Kernel: 2.6.16.21-0.13-default Devices ----------------------- HL-DT-ST DVDRAM GSA-4082B A201 (/dev/sr0, /dev/sg0) at [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-RAM; DVD-R; DVD-RW; DVD+R; DVD+RW] [DVD-ROM; DVD-R Sequential; DVD-RAM; DVD-RW Restricted Overwrite; DVD-RW Sequential; DVD+RW; DVD+R; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Restricted Overwrite] HL-DT-ST DVD-ROM GDR8163B 0F15 (/dev/hdc, ) at [CD-ROM; DVD-ROM] [DVD-ROM; CD-ROM] [None] Used versions ----------------------- growisofs: 6.1 mkisofs: 2.1 growisofs ----------------------- INFO: UTF-8 character encoding detected by locale settings. Assuming UTF-8 encoded filenames on source filesystem, use -input-charset to override. Using RING_NORM000.PNG;1 for sylvia/google-earth/resources/ring_norm.png (ring-norm.png) Using P1000055_1000.JPG;1 for mkipp/Documents/P1000055.1.jpg (P1000055-1.jpg) Using JOYSTICK_NORM000.PNG;1 for mkipp/google-earth/res/joystick_norm.png (joystick-norm.png) Using RING_NORM000.PNG;1 for mkipp/google-earth/resources/ring_norm.png (ring-norm.png) Using JOYSTICK_NORM000.PNG;1 for mkipp/google-earth/resources/joystick_norm.png (joystick-norm.png) Incorrectly encoded string (üseyfried.frp) encountered. Possibly creating an invalid Joliet extension. Aborting. :-( write failed: Input/output error growisofs command: ----------------------- /usr/bin/growisofs -Z /dev/sr0 -use-the-force-luke=notray -use-the-force-luke=tty -speed=1 -use-the-force-luke=bufsize:32m -gui -graft-points -volid Daten -volset -appid K3B THE CD KREATOR (C) 1998-2005 SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-root/k3bersjoa.tmp -rational-rock -hide-list /tmp/kde-root/k3bBgEkla.tmp -joliet -hide-joliet-list /tmp/kde-root/k3brJwtca.tmp -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-root/k3bFn9rmb.tmp -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 446488] New: kconsole draws screen very slowly
by bugzilla_noreply＠novell.com 08 Jan '09

08 Jan '09

https://bugzilla.novell.com/show_bug.cgi?id=446488 Summary: kconsole draws screen very slowly Product: openSUSE 11.1 Version: Beta 4 Platform: x86-64 OS/Version: Other Status: NEW Severity: Minor Priority: P5 - None Component: KDE4 Applications AssignedTo: kde-maintainers(a)suse.de ReportedBy: mszeredi(a)novell.com QAContact: qa(a)suse.de Found By: Development It feels like a 9600 baud terminal from the last century. Drawing is slow when switching virtual terminals, scrolling in less is slow, etc... No other application seems to be behaving this way, xterm is blindingly fast in comparison. This became apparent after upgrading from 11.0 to 11.1, but it may also be related to the fact that the X driver is now radeonhd, while previously it was fglrx. However I can't try with fglrx because the latest version doesn't work with the X server in 11.1. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 28

[Bug 460942] New: pm-profiler service start fails @ missing ".../ link_power_management_policy"
by bugzilla_noreply＠novell.com 08 Jan '09

08 Jan '09

https://bugzilla.novell.com/show_bug.cgi?id=460942 User pgnet.trash+F(a)gmail.com added comment https://bugzilla.novell.com/show_bug.cgi?id=460942#c1 Summary: pm-profiler service start fails @ missing ".../link_power_management_policy" Product: openSUSE 11.1 Version: Final Platform: x86-64 OS/Version: openSUSE 11.1 Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: pgnet.trash+F(a)gmail.com QAContact: qa(a)suse.de Found By: Customer on new OS11.1 install, Linux server 2.6.27.7-9-default #1 SMP 2008-12-04 18:10:04 +0100 x86_64 x86_64 x86_64 GNU/Linux following instruction for use of "pm-profiler" cat /usr/share/doc/packages/pm-profiler/README ... 1. mkdir /etc/pm-profiler/<profile name> 2. cp /usr/share/doc/packages/pm-profiler/config.template \ /etc/pm-profiler/<profile name>/config 3. Edit the settings in your profile configuration. You may even remove some variables you do not need. They will be handled like empty variables, the settings will not be touched at all. 4. Edit /etc/pm-profiler.conf and add the profile name to the PM_PROFILER_PROFILE="" variable 5. Either use 'rcpm-profiler start' or '/usr/lib/pm-profiler/enable-profile <profile name>' to activate the profile ... with config as, cat /etc/pm-profiler.conf PM_PROFILER_PROFILE="low_latency" cat /etc/pm-profiler/low_latency/config NAME="Low Latency Computing" DESCRIPTION="Profile optimized for low latency and best performance with no consideration of power consumption." CPUFREQ_GOVERNOR="performance" CPUFREQ_SCHED_MC_POWER_SAVINGS="0" SATA_ALPM="max_performance" DIRTY_WRITEBACK_CENTISECS="300" @ service launch, rcpm-profiler start Activating power management profile low_latency/usr/lib/pm-profiler/enable-profile: line 71: /sys/class/scsi_host/host?/link_power_management_policy: No such file or directory checking, ls -1d /sys/class/scsi_host/host? /sys/class/scsi_host/host0 /sys/class/scsi_host/host1 /sys/class/scsi_host/host2 /sys/class/scsi_host/host3 /sys/class/scsi_host/host4 /sys/class/scsi_host/host5 but, ls -1d /sys/class/scsi_host/host?/link_power_management_policy /bin/ls: No match. is/are missing -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 458578] New: network installation CD: speed up booting up the disk
by bugzilla_noreply＠novell.com 08 Jan '09

08 Jan '09

https://bugzilla.novell.com/show_bug.cgi?id=458578 Summary: network installation CD: speed up booting up the disk Product: openSUSE 11.1 Version: Final Platform: i586 OS/Version: Other Status: NEW Severity: Enhancement Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: bluedzins(a)wp.pl QAContact: jsrain(a)novell.com Found By: --- network installation CD: speed up booting up the disk When you try to install opensuse from network CD then you will see that comparing to KDE Live CD, the start of the disk is terrible slow. At some point booting up is almost frozen. I took a look at console level to see what is going on and there are 6 steps of loading installation system -- each step is 1KB (yes, 1024 bytes) and it takes a bit to load it and even more to wait after 100% of loading is shown -- my guess is there is some uncompressing, but how long can it take to uncompress 1KB chunk of data? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 8

[Bug 463087] New: Register for Support fails in YaST
by bugzilla_noreply＠novell.com 08 Jan '09

08 Jan '09

https://bugzilla.novell.com/show_bug.cgi?id=463087 Summary: Register for Support fails in YaST Product: openSUSE 11.1 Version: Final Platform: x86-64 OS/Version: openSUSE 11.1 Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: alexander.koenig(a)koenig-a.de QAContact: jsrain(a)novell.com Found By: --- Created an attachment (id=262880) --> (https://bugzilla.novell.com/attachment.cgi?id=262880) Yast logs I upgraded from openSUSE 11.0 to 11.1. When I run the "Support-Registrierung" in YaST, it always terminates with a server connection error, Details: "SSL negotiation failed" -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 460769] New: Release Notes translations for zh_TW(Traditional Chinese)
by bugzilla_noreply＠novell.com 08 Jan '09

08 Jan '09

https://bugzilla.novell.com/show_bug.cgi?id=460769 Summary: Release Notes translations for zh_TW(Traditional Chinese) Product: openSUSE 11.1 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Release Notes AssignedTo: ke(a)novell.com ReportedBy: swyear(a)yahoo.com.tw QAContact: coolo(a)novell.com Found By: --- http://i18n.opensuse.org/stats/trunk/zh_TW/lcn/index.php All the release notes strings are 100% translated But after a fully update, In /usr/share/doc/release-notes/openSUSE/RELEASE-NOTES.zh_TW.html still have many English. Do we forget something to do? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1

[Bug 457570] New: Boot of system with SATA Raid hangs in GRUB
by bugzilla_noreply＠novell.com 08 Jan '09

08 Jan '09

https://bugzilla.novell.com/show_bug.cgi?id=457570 Summary: Boot of system with SATA Raid hangs in GRUB Product: openSUSE 11.1 Version: GMC Platform: x86-64 OS/Version: openSUSE 11.1 Status: NEW Severity: Major Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: Winfrid.Tschiedel(a)fujitsu-siemens.com QAContact: jsrain(a)novell.com Found By: Third Party Developer/Partner Created an attachment (id=258871) --> (https://bugzilla.novell.com/attachment.cgi?id=258871) YaST2 log from the installation I have FSC Primergy rx220 with Promise FastTrak S150 TX4 ( 1 RAID0 with 1 disk ). On this System there are several linux installation, which are bootet via chainloader. I installed on this disk additional openSUSE 11.1 GMC and selected install bootloader to boot-partition. At this point I have a question, Novell offers 5 locations to install the boot-loader : MBR boot-partition root-partition extended partition specified partition As far as I have seen offer most of the major distributions just MBR and one specified partition ( the partition which contains /boot ). Which of the 5 Novell selections should work in case of chainloading ? The installation finished without any visible error, but reboot was hanging in grub, looks like that the MBR was distroyed. PS.: I was not able to update an existing openSUSE 11.1 RC2 - openSUSE 11.1 did not find any appropriate Linux installation on the disk -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 6

[Bug 462954] New: Can ext4 be included for opensuse 11.2x
by bugzilla_noreply＠novell.com 08 Jan '09

08 Jan '09

https://bugzilla.novell.com/show_bug.cgi?id=462954 Summary: Can ext4 be included for opensuse 11.2x Product: openSUSE 11.2 Version: unspecified Platform: Other OS/Version: Other Status: NEW Severity: Enhancement Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: doiggl(a)velocitynet.com.au QAContact: qa(a)suse.de Found By: --- Hello, Can ext4 be included for opensuse 11.2x http://kernelnewbies.org/Ext4 http://ext4.wiki.kernel.org/index.php/Main_Page http://kernelnewbies.org/Linux_2_6_28 >From the websites above: Linux 2.6.28 adds the first version of Ext4 as a stable filesystem, the much-expected GPU memory manager which will be the foundation of a renewed graphic stack, support for Ultra Wide Band (Wireless USB, UWB-IP), memory management scalability and performance improvements, a boot tracer, disk shock protection, the phonet network protocol, support of SSD discard requests, transparent proxy support, several new network drivers, controlable IO CPU affinity, high-resolution poll()/select(), support of a minimal "dummy" policy in SELinux, tracing improvements, x86 x2APIC support, a fb driver for VIA UniChrome devices, Mitac Mio A701 ARM-based smartphone support, some new drivers, improved device support, and many other small improvements and fixes. Ext4 is the evolution of the most used Linux filesystem, Ext3. In many ways, Ext4 is a deeper improvement over Ext3 than Ext3 was over Ext2. Ext3 was mostly about adding journaling to Ext2, but Ext4 modifies important data structures of the filesystem such as the ones destined to store the file data. The result is a filesystem with an improved design, better performance, reliability and features . Thankyou. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 441541] New: Black Screen on resume from suspend
by bugzilla_noreply＠novell.com 08 Jan '09

08 Jan '09

https://bugzilla.novell.com/show_bug.cgi?id=441541 Summary: Black Screen on resume from suspend Product: openSUSE 11.0 Version: Final Platform: i686 OS/Version: openSUSE 11.0 Status: NEW Severity: Blocker Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: andrew(a)joako.net QAContact: qa(a)suse.de Found By: --- #s2ram -f The system suspends to RAM correctly. Out of the box suspend-to-disk also works on this system. But when waking from either suspend-to-RAM or suspend-to-disk modes the screen is always black. In order for anything to be displayed Xorg needs to be reloaded (ctrl+alt+bkspace twice). Due to this bug the suspend options are pretty useless as the idea when suspending the system is that your current session is stored exactly as you left it. The system is using a Gigabyte GA-MA78GM-S2H mainboard (AMD 780G chipset), onboard HD 3200 graphics with the fglrx driver ("ATI Radeon HD 3200 Graphics (RS780 9610)") ver. 8.493_2.6.25.5_1.1-2.1 (Sun 08 Jun 2008 08:30:57 AM EDT) I can reproduce the bug with an older Dell (P4 i686, 32-bit) system. This one is running Nvidia (legacy) graphics. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 17